This renames the reverse instruction to opt_reverse, since now it
is only added by the optimizer. Then it uses as a more general
form of swap. This optimizes multiple assignment in the popped
case with more than two elements.
Before the new constant cache behavior, caches were invalidated by a
single global variable. You could inspect the value of this variable
with RubyVM.stat(:global_constant_state). This was mostly useful to
verify the behavior of the VM or to test constant loading like in Rails.
With the new constant cache behavior, we introduced
RubyVM.stat(:constant_cache) which returned a hash with symbol keys and
integer values that represented the number of live constant caches
associated with the given symbol. Additionally, we removed the old
RubyVM.stat(:global_constant_state).
This was proven to be not very useful, so it doesn't help you diagnose
constant loading issues. So, instead we added the global constant state
back into the RubyVM output. However, that number can be misleading as
now when you invalidate something like `Foo::Bar::Baz` you're actually
invalidating 3 different lists of inline caches.
This commit attempts to get the best of both worlds. We remove
RubyVM.stat(:global_constant_state) like we did originally, as it
doesn't have the same semantic meaning and it could be confusing going
forward. Instead we add RubyVM.stat(:constant_cache_invalidations) and
RubyVM.stat(:constant_cache_misses). These two metrics should provide
enough information to diagnose any constant loading issues, as well as
provide a replacement for the old global constant state.
This commit reintroduces finer-grained constant cache invalidation.
After 8008fb7 got merged, it was causing issues on token-threaded
builds (such as on Windows).
The issue was that when you're iterating through instruction sequences
and using the translator functions to get back the instruction structs,
you're either using `rb_vm_insn_null_translator` or
`rb_vm_insn_addr2insn2` depending if it's a direct-threading build.
`rb_vm_insn_addr2insn2` does some normalization to always return to
you the non-trace version of whatever instruction you're looking at.
`rb_vm_insn_null_translator` does not do that normalization.
This means that when you're looping through the instructions if you're
trying to do an opcode comparison, it can change depending on the type
of threading that you're using. This can be very confusing. So, this
commit creates a new translator function
`rb_vm_insn_normalizing_translator` to always return the non-trace
version so that opcode comparisons don't have to worry about different
configurations.
[Feature #18589]
This reverts commits for [Feature #18589]:
* 8008fb7352
"Update formatting per feedback"
* 8f6eaca2e1
"Delete ID from constant cache table if it becomes empty on ISEQ free"
* 629908586b
"Finer-grained inline constant cache invalidation"
MSWin builds on AppVeyor have been crashing since the merger.
Current behavior - caches depend on a global counter. All constant mutations cause caches to be invalidated.
```ruby
class A
B = 1
end
def foo
A::B # inline cache depends on global counter
end
foo # populate inline cache
foo # hit inline cache
C = 1 # global counter increments, all caches are invalidated
foo # misses inline cache due to `C = 1`
```
Proposed behavior - caches depend on name components. Only constant mutations with corresponding names will invalidate the cache.
```ruby
class A
B = 1
end
def foo
A::B # inline cache depends constants named "A" and "B"
end
foo # populate inline cache
foo # hit inline cache
C = 1 # caches that depend on the name "C" are invalidated
foo # hits inline cache because IC only depends on "A" and "B"
```
Examples of breaking the new cache:
```ruby
module C
# Breaks `foo` cache because "A" constant is set and the cache in foo depends
# on "A" and "B"
class A; end
end
B = 1
```
We expect the new cache scheme to be invalidated less often because names aren't frequently reused. With the cache being invalidated less, we can rely on its stability more to keep our constant references fast and reduce the need to throw away generated code in YJIT.
Use ISEQ_BODY macro to get the rb_iseq_constant_body of the ISeq. Using
this macro will make it easier for us to change the allocation strategy
of rb_iseq_constant_body when using Variable Width Allocation.
* Lazily create singletons on instance_{exec,eval}
Previously when instance_exec or instance_eval was called on an object,
that object would be given a singleton class so that method
definitions inside the block would be added to the object rather than
its class.
This commit aims to improve performance by delaying the creation of the
singleton class unless/until one is needed for method definition. Most
of the time instance_eval is used without any method definition.
This was implemented by adding a flag to the cref indicating that it
represents a singleton of the object rather than a class itself. In this
case CREF_CLASS returns the object's existing class, but in cases that
we are defining a method (either via definemethod or
VM_SPECIAL_OBJECT_CBASE which is used for undef and alias).
This also happens to fix what I believe is a bug. Previously
instance_eval behaved differently with regards to constant access for
true/false/nil than for all other objects. I don't think this was
intentional.
String::Foo = "foo"
"".instance_eval("Foo") # => "foo"
Integer::Foo = "foo"
123.instance_eval("Foo") # => "foo"
TrueClass::Foo = "foo"
true.instance_eval("Foo") # NameError: uninitialized constant Foo
This also slightly changes the error message when trying to define a method
through instance_eval on an object which can't have a singleton class.
Before:
$ ruby -e '123.instance_eval { def foo; end }'
-e:1:in `block in <main>': no class/module to add method (TypeError)
After:
$ ./ruby -e '123.instance_eval { def foo; end }'
-e:1:in `block in <main>': can't define singleton (TypeError)
IMO this error is a small improvement on the original and better matches
the (both old and new) message when definging a method using `def self.`
$ ruby -e '123.instance_eval{ def self.foo; end }'
-e:1:in `block in <main>': can't define singleton (TypeError)
Co-authored-by: Matthew Draper <matthew@trebex.net>
* Remove "under" argument from yield_under
* Move CREF_SINGLETON_SET into vm_cref_new
* Simplify vm_get_const_base
* Fix leaf VM_SPECIAL_OBJECT_CONST_BASE
Co-authored-by: Matthew Draper <matthew@trebex.net>
This provides a significant speedup for symbol, true, false,
nil, and 0-9, class/module, and a small speedup in most other cases.
Speedups (using included benchmarks):
:symbol :: 60%
0-9 :: 50%
Class/Module :: 50%
nil/true/false :: 20%
integer :: 10%
[] :: 10%
"" :: 3%
One reason this approach is faster is it reduces the number of
VM instructions for each interpolated value.
Initial idea, approach, and benchmarks from Eric Wong. I applied
the same approach against the master branch, updating it to handle
the significant internal changes since this was first proposed 4
years ago (such as CALL_INFO/CALL_CACHE -> CALL_DATA). I also
expanded it to optimize true/false/nil/0-9/class/module, and added
handling of missing methods, refined methods, and RUBY_DEBUG.
This renames the tostring insn to anytostring, and adds an
objtostring insn that implements the optimization. This requires
making a few functions non-static, and adding some non-static
functions.
This disables 4 YJIT tests. Those tests should be reenabled after
YJIT optimizes the new objtostring insn.
Implements [Feature #13715]
Co-authored-by: Eric Wong <e@80x24.org>
Co-authored-by: Alan Wu <XrXr@users.noreply.github.com>
Co-authored-by: Yusuke Endoh <mame@ruby-lang.org>
Co-authored-by: Koichi Sasada <ko1@atdot.net>
We only need the cref when we have a cache miss so don't look it up until we
need it. This likely speeds up class variable writes in the interpreter but
also simplifies the jit code.
Before
```
Warming up --------------------------------------
write a cvar 192.280k i/100ms
Calculating -------------------------------------
write a cvar 1.915M (± 3.5%) i/s - 9.614M in 5.026694s
```
After
```
Warming up --------------------------------------
write a cvar 216.308k i/100ms
Calculating -------------------------------------
write a cvar 2.140M (± 3.1%) i/s - 10.815M in 5.058079s
```
Followup to ruby/ruby#5137
* Refactor getclassvariable
We only need the cref when we have a cache miss so don't look it up until we
need it. This speeds up class variable reads in the interpreter but
also simplifies the jit code.
Benchmarks for master vs this branch (without yjit):
Before:
```
Warming up --------------------------------------
read a cvar 1.276M i/100ms
Calculating -------------------------------------
read a cvar 12.596M (± 1.7%) i/s - 63.781M in 5.064902s
```
After:
```
Warming up --------------------------------------
read a cvar 1.336M i/100ms
Calculating -------------------------------------
read a cvar 13.114M (± 3.6%) i/s - 65.488M in 5.000584s
```
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
* Clean up function signatures / remove dead code
rb_vm_getclassvariable signature has changed and we don't need
rb_vm_get_cref.
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
The `newhash` instruction was checking if `num` is greater than 0, but
so is [`rb_hash_new_with_size`](82e2443d8b/hash.c (L1564))
as well as [`rb_hash_bulk_insert`](82e2443d8b/hash.c (L4764)).
If we know the size is 0 in the instruction, we can just directly call
`rb_hash_new` and only check the size once. Unfortunately, when num is
greater than 0, it's still checked 3 times.
Pass in ec to vm_opt_newarray_{max,min}. Avoids having to
call GET_EC inside the functions, for better performance.
While here, add a test for Array#min/max being redefined to
test_optimization.rb.
Fixes [Bug #18180]
Redo of 34a2acdac788602c14bf05fb616215187badd504 and
931138b00696419945dc03e10f033b1f53cd50f3 which were reverted.
GitHub PR #4340.
This change implements a cache for class variables. Previously there was
no cache for cvars. Cvar access is slow due to needing to travel all the
way up th ancestor tree before returning the cvar value. The deeper the
ancestor tree the slower cvar access will be.
The benefits of the cache are more visible with a higher number of
included modules due to the way Ruby looks up class variables. The
benchmark here includes 26 modules and shows with the cache, this branch
is 6.5x faster when accessing class variables.
```
compare-ruby: ruby 3.1.0dev (2021-03-15T06:22:34Z master 9e5105c) [x86_64-darwin19]
built-ruby: ruby 3.1.0dev (2021-03-15T12:12:44Z add-cache-for-clas.. c6be009) [x86_64-darwin19]
| |compare-ruby|built-ruby|
|:--------|-----------:|---------:|
|vm_cvar | 5.681M| 36.980M|
| | -| 6.51x|
```
Benchmark.ips calling `ActiveRecord::Base.logger` from within a Rails
application. ActiveRecord::Base.logger has 71 ancestors. The more
ancestors a tree has, the more clear the speed increase. IE if Base had
only one ancestor we'd see no improvement. This benchmark is run on a
vanilla Rails application.
Benchmark code:
```ruby
require "benchmark/ips"
require_relative "config/environment"
Benchmark.ips do |x|
x.report "logger" do
ActiveRecord::Base.logger
end
end
```
Ruby 3.0 master / Rails 6.1:
```
Warming up --------------------------------------
logger 155.251k i/100ms
Calculating -------------------------------------
```
Ruby 3.0 with cvar cache / Rails 6.1:
```
Warming up --------------------------------------
logger 1.546M i/100ms
Calculating -------------------------------------
logger 14.857M (± 4.8%) i/s - 74.198M in 5.006202s
```
Lastly we ran a benchmark to demonstate the difference between master
and our cache when the number of modules increases. This benchmark
measures 1 ancestor, 30 ancestors, and 100 ancestors.
Ruby 3.0 master:
```
Warming up --------------------------------------
1 module 1.231M i/100ms
30 modules 432.020k i/100ms
100 modules 145.399k i/100ms
Calculating -------------------------------------
1 module 12.210M (± 2.1%) i/s - 61.553M in 5.043400s
30 modules 4.354M (± 2.7%) i/s - 22.033M in 5.063839s
100 modules 1.434M (± 2.9%) i/s - 7.270M in 5.072531s
Comparison:
1 module: 12209958.3 i/s
30 modules: 4354217.8 i/s - 2.80x (± 0.00) slower
100 modules: 1434447.3 i/s - 8.51x (± 0.00) slower
```
Ruby 3.0 with cvar cache:
```
Warming up --------------------------------------
1 module 1.641M i/100ms
30 modules 1.655M i/100ms
100 modules 1.620M i/100ms
Calculating -------------------------------------
1 module 16.279M (± 3.8%) i/s - 82.038M in 5.046923s
30 modules 15.891M (± 3.9%) i/s - 79.459M in 5.007958s
100 modules 16.087M (± 3.6%) i/s - 81.005M in 5.041931s
Comparison:
1 module: 16279458.0 i/s
100 modules: 16087484.6 i/s - same-ish: difference falls within error
30 modules: 15891406.2 i/s - same-ish: difference falls within error
```
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
This change fixes the bug described in https://bugs.ruby-lang.org/issues/17880.
Checking `ractor_shareable_p` will cause the method to call back into
Ruby. Anything calling this method can't be a leaf instruction,
otherwise it could crash. By adding `attr bool leaf = false` we no
longer crash because it marks the function as not a leaf.
Here's a simplified reproduction script:
```ruby
require "set"
class Id
attr_reader :db_id
def initialize(db_id)
@db_id = db_id
end
def ==(other)
other.class == self.class && other.db_id == db_id
end
alias_method :eql?, :==
def hash
10
end
def <=>(other)
db_id <=> other.db_id if other.is_a?(self.class)
end
end
class Namespace
IDS = Set[
Id.new(1).freeze,
Id.new(2).freeze,
Id.new(3).freeze,
Id.new(4).freeze,
].freeze
class << self
def test?(id)
IDS.include?(id)
end
end
end
p Namespace.test?(Id.new(1))
p Namespace.test?(Id.new(5))
```
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
Instead of on read. Once it's in the inline cache we never have to make
one again. We want to eventually put the value into the cache, and the
best opportunity to do that is when you write the value.
This change implements a cache for class variables. Previously there was
no cache for cvars. Cvar access is slow due to needing to travel all the
way up th ancestor tree before returning the cvar value. The deeper the
ancestor tree the slower cvar access will be.
The benefits of the cache are more visible with a higher number of
included modules due to the way Ruby looks up class variables. The
benchmark here includes 26 modules and shows with the cache, this branch
is 6.5x faster when accessing class variables.
```
compare-ruby: ruby 3.1.0dev (2021-03-15T06:22:34Z master 9e5105ca45) [x86_64-darwin19]
built-ruby: ruby 3.1.0dev (2021-03-15T12:12:44Z add-cache-for-clas.. c6be0093ae) [x86_64-darwin19]
| |compare-ruby|built-ruby|
|:--------|-----------:|---------:|
|vm_cvar | 5.681M| 36.980M|
| | -| 6.51x|
```
Benchmark.ips calling `ActiveRecord::Base.logger` from within a Rails
application. ActiveRecord::Base.logger has 71 ancestors. The more
ancestors a tree has, the more clear the speed increase. IE if Base had
only one ancestor we'd see no improvement. This benchmark is run on a
vanilla Rails application.
Benchmark code:
```ruby
require "benchmark/ips"
require_relative "config/environment"
Benchmark.ips do |x|
x.report "logger" do
ActiveRecord::Base.logger
end
end
```
Ruby 3.0 master / Rails 6.1:
```
Warming up --------------------------------------
logger 155.251k i/100ms
Calculating -------------------------------------
```
Ruby 3.0 with cvar cache / Rails 6.1:
```
Warming up --------------------------------------
logger 1.546M i/100ms
Calculating -------------------------------------
logger 14.857M (± 4.8%) i/s - 74.198M in 5.006202s
```
Lastly we ran a benchmark to demonstate the difference between master
and our cache when the number of modules increases. This benchmark
measures 1 ancestor, 30 ancestors, and 100 ancestors.
Ruby 3.0 master:
```
Warming up --------------------------------------
1 module 1.231M i/100ms
30 modules 432.020k i/100ms
100 modules 145.399k i/100ms
Calculating -------------------------------------
1 module 12.210M (± 2.1%) i/s - 61.553M in 5.043400s
30 modules 4.354M (± 2.7%) i/s - 22.033M in 5.063839s
100 modules 1.434M (± 2.9%) i/s - 7.270M in 5.072531s
Comparison:
1 module: 12209958.3 i/s
30 modules: 4354217.8 i/s - 2.80x (± 0.00) slower
100 modules: 1434447.3 i/s - 8.51x (± 0.00) slower
```
Ruby 3.0 with cvar cache:
```
Warming up --------------------------------------
1 module 1.641M i/100ms
30 modules 1.655M i/100ms
100 modules 1.620M i/100ms
Calculating -------------------------------------
1 module 16.279M (± 3.8%) i/s - 82.038M in 5.046923s
30 modules 15.891M (± 3.9%) i/s - 79.459M in 5.007958s
100 modules 16.087M (± 3.6%) i/s - 81.005M in 5.041931s
Comparison:
1 module: 16279458.0 i/s
100 modules: 16087484.6 i/s - same-ish: difference falls within error
30 modules: 15891406.2 i/s - same-ish: difference falls within error
```
Co-authored-by: Aaron Patterson <tenderlove@ruby-lang.org>
We can take advantage of fstrings to de-duplicate the defined strings.
This means we don't need to keep the list of defined strings on the VM
(or register them as mark objects)
constant cache `IC` is accessed by non-atomic manner and there are
thread-safety issues, so Ruby 3.0 disables to use const cache on
non-main ractors.
This patch enables it by introducing `imemo_constcache` and allocates
it by every re-fill of const cache like `imemo_callcache`.
[Bug #17510]
Now `IC` only has one entry `IC::entry` and it points to
`iseq_inline_constant_cache_entry`, managed by T_IMEMO object.
`IC` is atomic data structure so `rb_mjit_before_vm_ic_update()` and
`rb_mjit_after_vm_ic_update()` is not needed.
Some tunings.
* add `inline` for vm_sendish()
* pass enum instead of func ptr to vm_sendish()
* reorder initial order of `calling` struct.
* add ALWAYS_INLINE for vm_search_method_fastpath()
* call vm_search_method_fastpath() from vm_sendish()
`cd` is passed to method call functions to method invocation
functions, but `cd` can be manipulated by other ractors simultaneously
so it contains thread-safety issue.
To solve this issue, this patch stores `ci` and found `cc` to `calling`
and stops to pass `cd`.
iv_index_tbl manages instance variable indexes (ID -> index).
This data structure should be synchronized with other ractors
so introduce some VM locks.
This patch also introduced atomic ivar cache used by
set/getinlinecache instructions. To make updating ivar cache (IVC),
we changed iv_index_tbl data structure to manage (ID -> entry)
and an entry points serial and index. IVC points to this entry so
that cache update becomes atomically.
Noticed that struct rb_builtin_function is a purely compile-time
constant. MJIT can eliminate some runtime calculations by statically
generate dedicated C code generator for each builtin functions.
Use ID instead of GENTRY for gvars.
Global variables are compiled into GENTRY (a pointer to struct
rb_global_entry). This patch replace this GENTRY to ID and
make the code simple.
We need to search GENTRY from ID every time (st_lookup), so
additional overhead will be introduced.
However, the performance of accessing global variables is not
important now a day and this simplicity helps Ractor development.
These two function were almost identical, except in case of
T_STRING/T_FLOAT. Why not merge them into one, and let the difference be
handled in normal method calls (slowpath). This does not improve
runtime performance for me, but at least reduces for instance rb_eql_opt
from 653 bytes to 86 bytes on my machine, according to nm(1).
This changes the following warnings:
* warning: class variable access from toplevel
* warning: class variable @foo of D is overtaken by C
into RuntimeErrors. Handle defined?(@@foo) at toplevel
by returning nil instead of raising an exception (the previous
behavior warned before returning nil when defined? was used).
Refactor the specs to avoid the warnings even in older versions.
The specs were checking for the warnings, but the purpose of
the related specs as evidenced from their description is to
test for behavior, not for warnings.
Fixes [Bug #14541]
This patch contains several ideas:
(1) Disposable inline method cache (IMC) for race-free inline method cache
* Making call-cache (CC) as a RVALUE (GC target object) and allocate new
CC on cache miss.
* This technique allows race-free access from parallel processing
elements like RCU.
(2) Introduce per-Class method cache (pCMC)
* Instead of fixed-size global method cache (GMC), pCMC allows flexible
cache size.
* Caching CCs reduces CC allocation and allow sharing CC's fast-path
between same call-info (CI) call-sites.
(3) Invalidate an inline method cache by invalidating corresponding method
entries (MEs)
* Instead of using class serials, we set "invalidated" flag for method
entry itself to represent cache invalidation.
* Compare with using class serials, the impact of method modification
(add/overwrite/delete) is small.
* Updating class serials invalidate all method caches of the class and
sub-classes.
* Proposed approach only invalidate the method cache of only one ME.
See [Feature #16614] for more details.
Now, rb_call_info contains how to call the method with tuple of
(mid, orig_argc, flags, kwarg). Most of cases, kwarg == NULL and
mid+argc+flags only requires 64bits. So this patch packed
rb_call_info to VALUE (1 word) on such cases. If we can not
represent it in VALUE, then use imemo_callinfo which contains
conventional callinfo (rb_callinfo, renamed from rb_call_info).
iseq->body->ci_kw_size is removed because all of callinfo is VALUE
size (packed ci or a pointer to imemo_callinfo).
To access ci information, we need to use these functions:
vm_ci_mid(ci), _flag(ci), _argc(ci), _kwarg(ci).
struct rb_call_info_kw_arg is renamed to rb_callinfo_kwarg.
rb_funcallv_with_cc() and rb_method_basic_definition_p_with_cc()
is temporary removed because cd->ci should be marked.
This commit introduces an "inline ivar cache" struct. The reason we
need this is so compaction can differentiate from an ivar cache and a
regular inline cache. Regular inline caches contain references to
`VALUE` and ivar caches just contain references to the ivar index. With
this new struct we can easily update references for inline caches (but
not inline var caches as they just contain an int)
Asynchronous events such as signal trap, finalization timing,
thread switching and so on are managed by "interrupt_flag".
Ruby's threads check this flag periodically and if a thread
does not check this flag, above events doesn't happen.
This checking is CHECK_INTS() (related) macro and it is placed
at some places (laeve instruction and so on). However, at the end
of C methods, C blocks (IMEMO_IFUNC) etc there are no checking
and it can introduce uninterruptible thread.
To modify this situation, we decide to place CHECK_INTS() at
vm_pop_frame(). It increases interrupt checking points.
[Bug #16366]
This patch can introduce unexpected events...
Jeremy Evans
Takashi Kokubun
Kevin Newton
Nobuyoshi Nakada
Peter Zhu
Jemma Issroff
John Hawthorn
Eileen M. Uchitelle
Aaron Patterson
Alan Wu
eileencodes
ebrohman
Koichi Sasada
Benoit Daloze
卜部昌平