vitess-gh/examples/compose

Local Vitess cluster using docker-compose

This directory has a docker-compose sample application. To understand it better, you can run it.

First you will need to install docker-compose.

Before you begin

You will need to create a docker-compose.yml file. There are 2 ways to do this.

1. Run go run vtcompose/vtcompose.go --args. Instructions can be found here
2. Use the docker-compose.beginners.yml to generate your docker-compose.yml file. Run:

vitess/examples/compose$ cp docker-compose.beginners.yml docker-compose.yml

Create your .env file

vitess/examples/compose$ cp template.env .env

You can then proceed to the instructions under Start the Cluster section.

Programatically create Vitess configuration for Docker

To create a configuration to your specifications, run vtcompose. Creates corresponding docker-compose file, vschema files per keyspace, and loads schemas.

vitess/examples/compose$ go run vtcompose/vtcompose.go  --args(optional)

Use -h or --help to get list of flags with descriptions.

Flags available:

• baseDockerComposeFile - Specifies starting docker-compose yaml file.
• baseVschemaFile - Specifies starting vschema json file.
• topologyFlags - Specifies Vitess topology flags config
• webPort - Specifies web port to be used.
• gRpcPort - Specifies gRPC port to be used.
• mySqlPort - Specifies mySql port to be used.
• cell - `Specifies Vitess cell name to be used.
• keyspaceData - List of keyspace_name:num_of_shards:num_of_replica_tablets:schema_file_names:<optional>lookup_keyspace_name separated by ';'.
  • This is where you specify most of the data for the program to build your vSchema and docker-compose files.
  • Examples you can run;
  • Default

  go run vtcompose/vtcompose.go
  

  • Use 0 for num_of_shards to specify an unsharded keyspace

  go run vtcompose/vtcompose.go -keyspaceData="test_keyspace:0:2:create_messages.sql"
  

  • Multiple keyspaces with sharded test_keyspace

  go run vtcompose/vtcompose.go -keyspaceData="test_keyspace:2:1:create_messages.sql,create_tokens.sql:lookup_keyspace;lookup_keyspace:1:1:create_tokens_token_lookup.sql,create_messages_message_lookup.sql"
  

• externalDbData - Specifies which databases/keyspaces are external and provides data along with it to connect to the external db. List of <external_db_name>,<DB_HOST>,<DB_PORT>,<DB_USER>,<DB_PASS>,<DB_CHARSET> separated by ';'.
  When using this, make sure to have the external_db_name/keyspace in the keyspaceData flag with no schema_file_names specified.

  go run vtcompose/vtcompose.go -keyspaceData="commerce:0:2::" -externalDbData="commerce:external_db_host:3306:external_db_user:external_db_password:"
  

Start the cluster

To start Consul(which saves the topology config), vtctld, vtgate, vtorc and a few vttablets with MySQL running on them.

vitess/examples/compose$ docker-compose up -d

Check cluster status

Check the status of the cluster.

vitess/examples/compose$ docker-compose ps
           Name                         Command                  State                                                                     Ports
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
compose_consul1_1                          docker-entrypoint.sh agent ...   Up             8300/tcp, 8301/tcp, 8301/udp, 8302/tcp, 8302/udp,
                                                                                           0.0.0.0:8400->8400/tcp,:::8400->8400/tcp, 0.0.0.0:8500->8500/tcp,:::8500->8500/tcp,
                                                                                           0.0.0.0:8600->8600/tcp,:::8600->8600/tcp, 8600/udp
compose_consul2_1                          docker-entrypoint.sh agent ...   Up             8300/tcp, 8301/tcp, 8301/udp, 8302/tcp, 8302/udp, 8400/tcp, 8500/tcp, 8600/tcp,
                                                                                           8600/udp
compose_consul3_1                          docker-entrypoint.sh agent ...   Up             8300/tcp, 8301/tcp, 8301/udp, 8302/tcp, 8302/udp, 8400/tcp, 8500/tcp, 8600/tcp,
                                                                                           8600/udp
compose_external_db_host_1                 docker-entrypoint.sh --ser ...   Up (healthy)   0.0.0.0:59816->3306/tcp, 33060/tcp
compose_schemaload_1                       sh -c /script/schemaload.sh      Exit 0
compose_set_keyspace_durability_policy_1   sh -c /script/set_keyspace ...   Exit 0
compose_vreplication_1                     sh -c [ $EXTERNAL_DB -eq 1 ...   Exit 0
compose_vtctld_1                           sh -c  /vt/bin/vtctld -top ...   Up             0.0.0.0:59823->15999/tcp, 0.0.0.0:15000->8080/tcp,:::15000->8080/tcp
compose_vtgate_1                           sh -c /vt/bin/vtgate -topo ...   Up             0.0.0.0:15306->15306/tcp,:::15306->15306/tcp, 0.0.0.0:59830->15999/tcp,
                                                                                           0.0.0.0:15099->8080/tcp,:::15099->8080/tcp
compose_vtorc_1                            sh -c /script/vtorc-up.sh        Up (healthy)   0.0.0.0:13000->3000/tcp,:::13000->3000/tcp
compose_vttablet100_1                      sh -c [ $EXTERNAL_DB -eq 1 ...   Exit 0
compose_vttablet101_1                      sh -c /script/vttablet-up. ...   Up (healthy)   0.0.0.0:59824->15999/tcp, 0.0.0.0:59825->3306/tcp,
                                                                                           0.0.0.0:15101->8080/tcp,:::15101->8080/tcp
compose_vttablet102_1                      sh -c /script/vttablet-up. ...   Up (healthy)   0.0.0.0:59826->15999/tcp, 0.0.0.0:59827->3306/tcp,
                                                                                           0.0.0.0:15102->8080/tcp,:::15102->8080/tcp
compose_vttablet103_1                      sh -c /script/vttablet-up. ...   Up (healthy)   0.0.0.0:65284->15999/tcp, 0.0.0.0:65285->3306/tcp,
                                                                                           0.0.0.0:15103->8080/tcp,:::15103->8080/tcp

Check the status of the containers

You can check the logs of the containers (vtgate, vttablet101, vttablet102, vttablet103) at any time. For example to check vtgate logs, run the following;

vitess/examples/compose$ docker-compose logs -f vtgate

Load the schema

This step is carried out by the schemaload container

We need to create a few tables into our new cluster. To do that, we can run the ApplySchema command.

vitess/examples/compose$ ./lvtctl.sh ApplySchema -- --sql "$(cat tables/create_messages.sql)" test_keyspace	

Create Vschema

This step is carried out by the schemaload container

Create Vschema

vitess/examples/compose$ ./lvtctl.sh ApplyVschema -- --vschema '{"sharded": false }' test_keyspace	

Connect to vgate and run queries

vtgate responds to the MySQL protocol, so we can connect to it using the default MySQL client command line.

vitess/examples/compose$ mysql --port=15306 --host=127.0.0.1

Note that you may need to replace 127.0.0.1 with docker ip or docker-machine ip

You can also use the ./lmysql.sh helper script.

vitess/examples/compose$ ./lmysql.sh --port=15306 --host=<DOCKER_HOST_IP>

where <DOCKER_HOST_IP> is docker-machine ip or external docker host ip addr

Play around with vtctl commands

vitess/examples/compose$ ./lvtctl.sh Help

Exploring

• vtctld web ui: http://localhost:15000

• vttablets web ui: http://localhost:15101/debug/status http://localhost:15102/debug/status http://localhost:15103/debug/status

• vtgate web ui: http://localhost:15099/debug/status

• vtorc web ui: http://localhost:13000

• vtorc debug ui: http://localhost:13200

• Stream querylog curl -S localhost:15099/debug/querylog

Note that you may need to replace localhost with docker ip or docker-machine ip

Troubleshooting

If the cluster gets in a bad state, you most likely will have to stop and kill the containers. Note: you will lose all the data.

vitess/examples/compose$ docker-compose kill
vitess/examples/compose$ docker-compose rm

Advanced Usage

External mysql instance

The compose example has the capability to run against an external mysql instance. Kindly take care to secure your connection to the database. To start vitess against unsharded external mysql, change the following variables in your .env file to match your external database;

KEYSPACE=external_db_name
DB=external_db_name
EXTERNAL_DB=1
DB_HOST=external_db_host
DB_PORT=external_db_port
DB_USER=external_db_user
DB_PASS=external_db_password
DB_CHARSET=CHARACTER SET utf8 COLLATE utf8_general_ci

Important Ensure you have log bin enabled on your external database. Refer to the .cnf files here

Start the cluster

To simulate running vitess against an external cluster, simply change EXTERNAL_DB=1 when you copy your template.env then run the command below

vitess/examples/compose$ docker-compose up -d

Check cluster status

Once vitess starts, check cluster status

vitess/examples/compose$ docker-compose ps

           Name                         Command                  State                                                                     Ports
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
compose_consul1_1            docker-entrypoint.sh agent ...   Up             8300/tcp, 8301/tcp, 8301/udp, 8302/tcp, 8302/udp, 0.0.0.0:8400->8400/tcp, 0.0.0.0:8500->8500/tcp, 0.0.0.0:8600->8600/tcp, 8600/udp
compose_consul2_1            docker-entrypoint.sh agent ...   Up             8300/tcp, 8301/tcp, 8301/udp, 8302/tcp, 8302/udp, 8400/tcp, 8500/tcp, 8600/tcp, 8600/udp
compose_consul3_1            docker-entrypoint.sh agent ...   Up             8300/tcp, 8301/tcp, 8301/udp, 8302/tcp, 8302/udp, 8400/tcp, 8500/tcp, 8600/tcp, 8600/udp
compose_external_db_host_1   docker-entrypoint.sh mysqld      Up (healthy)   0.0.0.0:32846->3306/tcp, 33060/tcp
compose_schemaload_1         sh -c /script/schemaload.sh      Exit 0
compose_vreplication_1       sh -c [ $EXTERNAL_DB -eq 1 ...   Exit 0
compose_vtctld_1             sh -c  /vt/bin/vtctld -top ...   Up             0.0.0.0:32847->15999/tcp, 0.0.0.0:15000->8080/tcp
compose_vtgate_1             sh -c /vt/bin/vtgate -topo ...   Up             0.0.0.0:15306->15306/tcp, 0.0.0.0:32856->15999/tcp, 0.0.0.0:15099->8080/tcp
compose_vtorc_1              sh -c /script/vtorc-up.sh        Up (healthy)   0.0.0.0:13000->3000/tcp
compose_vttablet100_1        sh -c [ $EXTERNAL_DB -eq 1 ...   Up (healthy)   0.0.0.0:32848->15999/tcp, 0.0.0.0:32849->3306/tcp, 0.0.0.0:15100->8080/tcp
compose_vttablet101_1        sh -c /script/vttablet-up. ...   Up (healthy)   0.0.0.0:32850->15999/tcp, 0.0.0.0:32851->3306/tcp, 0.0.0.0:15101->8080/tcp
compose_vttablet102_1        sh -c /script/vttablet-up. ...   Up (healthy)   0.0.0.0:32853->15999/tcp, 0.0.0.0:32855->3306/tcp, 0.0.0.0:15102->8080/tcp
compose_vttablet103_1        sh -c /script/vttablet-up. ...   Up (healthy)   0.0.0.0:32852->15999/tcp, 0.0.0.0:32854->3306/tcp, 0.0.0.0:15103->8080/tcp

Check replication

The vreplication container included performs the following actions;

1. Identifies the correct source and destination tablets for you
2. Copies schema from external database to Vitess managed tablet
3. Starts VReplication from external keyspace to managed keyspace
4. Prints out helpful debug information for you.

vitess/examples/compose$ docker-compose logs -f vreplication
vreplication_1      | + /vt/bin/vtctlclient --server vtctld:15999 VReplicationExec local-0000000101 'insert into _vt.vreplication (db_name, source, pos, max_tps, max_replication_lag, tablet_types, time_updated, transaction_timestamp, state) values('\''commerce'\'', '\''keyspace:\"ext_commerce\" shard:\"0\" filter:<rules:<match:\"/.*\" > > on_ddl:EXEC_IGNORE '\'', '\'''\'', 9999, 9999, '\''primary'\'', 0, 0, '\''Running'\'')'
vreplication_1      | + /vt/bin/vtctlclient --server vtctld:15999 VReplicationExec local-0000000101 'select * from _vt.vreplication'
vreplication_1      | +----+----------+--------------------------------+-----+----------+---------+---------------------+------+--------------+--------------+-----------------------+---------+---------+----------+
vreplication_1      | | id | workflow |             source             | pos | stop_pos | max_tps | max_replication_lag | cell | tablet_types | time_updated | transaction_timestamp |  state  | message | db_name  |
vreplication_1      | +----+----------+--------------------------------+-----+----------+---------+---------------------+------+--------------+--------------+-----------------------+---------+---------+----------+
vreplication_1      | |  1 |          | keyspace:"ext_commerce"        |     |          |    9999 |                9999 |      | primary       |            0 |                     0 | Running |         | commerce |
vreplication_1      | |    |          | shard:"0"                      |     |          |         |                     |      |              |              |                       |         |         |         |
vreplication_1      | |    |          | filter:<rules:<match:"/.*" > > |     |          |         |                     |      |              |              |                       |         |         |         |
vreplication_1      | |    |          | on_ddl:EXEC_IGNORE             |     |          |         |                     |      |              |              |                       |         |         |         |
vreplication_1      | +----+----------+--------------------------------+-----+----------+---------+---------------------+------+--------------+--------------+-----------------------+---------+---------+----------+
compose_vreplication_1 exited with code 0

Connect to vgate and run queries

vtgate responds to the MySQL protocol, so we can connect to it using the default MySQL client command line. Verify that data was copied and is replicating successfully.

vitess/examples/compose$ ./lmysql --port=15306 --host=<host of machine containers are running in e.g. 127.0.0.1, docker-machine ip e.t.c>

mysql> show databases;
mysql> show databases;
+--------------+
| Databases    |
+--------------+
| commerce     |
| ext_commerce |
+--------------+
2 rows in set (0.01 sec)
mysql> use commerce@replica;
Reading table information for completion of table and column names
You can turn off this feature to get a quicker startup with -A

Database changed
mysql> show tables;
+--------------------+
| Tables_in_commerce |
+--------------------+
| users              |
+--------------------+
1 row in set (0.00 sec)

mysql> select count(*) from users;
+----------+
| count(*) |
+----------+
|     1000 |
+----------+
1 row in set (0.00 sec)

Helper Scripts

The following helper scripts are included to help you perform various actions easily

• vitess/examples/compose/lvtctl.sh
• vitess/examples/compose/lmysql.sh

You may run them as below

vitess/examples/compose$ ./lvtctl.sh <args>

To run against a specific compose service/container, use the environment variable $CS

vitess/examples/compose$ (export CS=vttablet101; ./lvtctl.sh <args> )

Custom Image Tags

You may specify a custom vitess:lite image tag by setting the evnironment variable VITESS_TAG.
This is optional and defaults to the latest tag. Example;

• Set VITESS_TAG=8.0.0 in your .env before running docker-compose up -d
• Run VITESS_TAG=8.0.0; docker-compose up -d

Reference

Checkout this excellent post about The Life of a Vitess Cluster