WSL2-Linux-Kernel/drivers/clk/tegra/clk-tegra210-emc.c

372 строки
8.9 KiB
C
Исходник Постоянная ссылка Обычный вид История

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (c) 2015-2020, NVIDIA CORPORATION. All rights reserved.
*/
#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clk/tegra.h>
#include <linux/device.h>
#include <linux/module.h>
#include <linux/io.h>
#include <linux/slab.h>
#include "clk.h"
#define CLK_SOURCE_EMC 0x19c
#define CLK_SOURCE_EMC_2X_CLK_SRC GENMASK(31, 29)
#define CLK_SOURCE_EMC_MC_EMC_SAME_FREQ BIT(16)
#define CLK_SOURCE_EMC_2X_CLK_DIVISOR GENMASK(7, 0)
#define CLK_SRC_PLLM 0
#define CLK_SRC_PLLC 1
#define CLK_SRC_PLLP 2
#define CLK_SRC_CLK_M 3
#define CLK_SRC_PLLM_UD 4
#define CLK_SRC_PLLMB_UD 5
#define CLK_SRC_PLLMB 6
#define CLK_SRC_PLLP_UD 7
struct tegra210_clk_emc {
struct clk_hw hw;
void __iomem *regs;
struct tegra210_clk_emc_provider *provider;
struct clk *parents[8];
};
static inline struct tegra210_clk_emc *
to_tegra210_clk_emc(struct clk_hw *hw)
{
return container_of(hw, struct tegra210_clk_emc, hw);
}
static const char *tegra210_clk_emc_parents[] = {
"pll_m", "pll_c", "pll_p", "clk_m", "pll_m_ud", "pll_mb_ud",
"pll_mb", "pll_p_ud",
};
static u8 tegra210_clk_emc_get_parent(struct clk_hw *hw)
{
struct tegra210_clk_emc *emc = to_tegra210_clk_emc(hw);
u32 value;
u8 src;
value = readl_relaxed(emc->regs + CLK_SOURCE_EMC);
src = FIELD_GET(CLK_SOURCE_EMC_2X_CLK_SRC, value);
return src;
}
static unsigned long tegra210_clk_emc_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct tegra210_clk_emc *emc = to_tegra210_clk_emc(hw);
u32 value, div;
/*
* CCF assumes that neither the parent nor its rate will change during
* ->set_rate(), so the parent rate passed in here was cached from the
* parent before the ->set_rate() call.
*
* This can lead to wrong results being reported for the EMC clock if
* the parent and/or parent rate have changed as part of the EMC rate
* change sequence. Fix this by overriding the parent clock with what
* we know to be the correct value after the rate change.
*/
parent_rate = clk_hw_get_rate(clk_hw_get_parent(hw));
value = readl_relaxed(emc->regs + CLK_SOURCE_EMC);
div = FIELD_GET(CLK_SOURCE_EMC_2X_CLK_DIVISOR, value);
div += 2;
return DIV_ROUND_UP(parent_rate * 2, div);
}
static long tegra210_clk_emc_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *prate)
{
struct tegra210_clk_emc *emc = to_tegra210_clk_emc(hw);
struct tegra210_clk_emc_provider *provider = emc->provider;
unsigned int i;
if (!provider || !provider->configs || provider->num_configs == 0)
return clk_hw_get_rate(hw);
for (i = 0; i < provider->num_configs; i++) {
if (provider->configs[i].rate >= rate)
return provider->configs[i].rate;
}
return provider->configs[i - 1].rate;
}
static struct clk *tegra210_clk_emc_find_parent(struct tegra210_clk_emc *emc,
u8 index)
{
struct clk_hw *parent = clk_hw_get_parent_by_index(&emc->hw, index);
const char *name = clk_hw_get_name(parent);
/* XXX implement cache? */
return __clk_lookup(name);
}
static int tegra210_clk_emc_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
struct tegra210_clk_emc *emc = to_tegra210_clk_emc(hw);
struct tegra210_clk_emc_provider *provider = emc->provider;
struct tegra210_clk_emc_config *config;
struct device *dev = provider->dev;
struct clk_hw *old, *new, *parent;
u8 old_idx, new_idx, index;
struct clk *clk;
unsigned int i;
int err;
if (!provider->configs || provider->num_configs == 0)
return -EINVAL;
for (i = 0; i < provider->num_configs; i++) {
if (provider->configs[i].rate >= rate) {
config = &provider->configs[i];
break;
}
}
if (i == provider->num_configs)
config = &provider->configs[i - 1];
old_idx = tegra210_clk_emc_get_parent(hw);
new_idx = FIELD_GET(CLK_SOURCE_EMC_2X_CLK_SRC, config->value);
old = clk_hw_get_parent_by_index(hw, old_idx);
new = clk_hw_get_parent_by_index(hw, new_idx);
/* if the rate has changed... */
if (config->parent_rate != clk_hw_get_rate(old)) {
/* ... but the clock source remains the same ... */
if (new_idx == old_idx) {
/* ... switch to the alternative clock source. */
switch (new_idx) {
case CLK_SRC_PLLM:
new_idx = CLK_SRC_PLLMB;
break;
case CLK_SRC_PLLM_UD:
new_idx = CLK_SRC_PLLMB_UD;
break;
case CLK_SRC_PLLMB_UD:
new_idx = CLK_SRC_PLLM_UD;
break;
case CLK_SRC_PLLMB:
new_idx = CLK_SRC_PLLM;
break;
}
/*
* This should never happen because we can't deal with
* it.
*/
if (WARN_ON(new_idx == old_idx))
return -EINVAL;
new = clk_hw_get_parent_by_index(hw, new_idx);
}
index = new_idx;
parent = new;
} else {
index = old_idx;
parent = old;
}
clk = tegra210_clk_emc_find_parent(emc, index);
if (IS_ERR(clk)) {
err = PTR_ERR(clk);
dev_err(dev, "failed to get parent clock for index %u: %d\n",
index, err);
return err;
}
/* set the new parent clock to the required rate */
if (clk_get_rate(clk) != config->parent_rate) {
err = clk_set_rate(clk, config->parent_rate);
if (err < 0) {
dev_err(dev, "failed to set rate %lu Hz for %pC: %d\n",
config->parent_rate, clk, err);
return err;
}
}
/* enable the new parent clock */
if (parent != old) {
err = clk_prepare_enable(clk);
if (err < 0) {
dev_err(dev, "failed to enable parent clock %pC: %d\n",
clk, err);
return err;
}
}
/* update the EMC source configuration to reflect the new parent */
config->value &= ~CLK_SOURCE_EMC_2X_CLK_SRC;
config->value |= FIELD_PREP(CLK_SOURCE_EMC_2X_CLK_SRC, index);
/*
* Finally, switch the EMC programming with both old and new parent
* clocks enabled.
*/
err = provider->set_rate(dev, config);
if (err < 0) {
dev_err(dev, "failed to set EMC rate to %lu Hz: %d\n", rate,
err);
/*
* If we're unable to switch to the new EMC frequency, we no
* longer need the new parent to be enabled.
*/
if (parent != old)
clk_disable_unprepare(clk);
return err;
}
/* reparent to new parent clock and disable the old parent clock */
if (parent != old) {
clk = tegra210_clk_emc_find_parent(emc, old_idx);
if (IS_ERR(clk)) {
err = PTR_ERR(clk);
dev_err(dev,
"failed to get parent clock for index %u: %d\n",
old_idx, err);
return err;
}
clk_hw_reparent(hw, parent);
clk_disable_unprepare(clk);
}
return err;
}
static const struct clk_ops tegra210_clk_emc_ops = {
.get_parent = tegra210_clk_emc_get_parent,
.recalc_rate = tegra210_clk_emc_recalc_rate,
.round_rate = tegra210_clk_emc_round_rate,
.set_rate = tegra210_clk_emc_set_rate,
};
struct clk *tegra210_clk_register_emc(struct device_node *np,
void __iomem *regs)
{
struct tegra210_clk_emc *emc;
struct clk_init_data init;
struct clk *clk;
emc = kzalloc(sizeof(*emc), GFP_KERNEL);
if (!emc)
return ERR_PTR(-ENOMEM);
emc->regs = regs;
init.name = "emc";
init.ops = &tegra210_clk_emc_ops;
init.flags = CLK_IS_CRITICAL | CLK_GET_RATE_NOCACHE;
init.parent_names = tegra210_clk_emc_parents;
init.num_parents = ARRAY_SIZE(tegra210_clk_emc_parents);
emc->hw.init = &init;
clk = clk_register(NULL, &emc->hw);
if (IS_ERR(clk)) {
kfree(emc);
return clk;
}
return clk;
}
int tegra210_clk_emc_attach(struct clk *clk,
struct tegra210_clk_emc_provider *provider)
{
struct clk_hw *hw = __clk_get_hw(clk);
struct tegra210_clk_emc *emc = to_tegra210_clk_emc(hw);
struct device *dev = provider->dev;
unsigned int i;
int err;
if (!try_module_get(provider->owner))
return -ENODEV;
for (i = 0; i < provider->num_configs; i++) {
struct tegra210_clk_emc_config *config = &provider->configs[i];
struct clk_hw *parent;
bool same_freq;
u8 div, src;
div = FIELD_GET(CLK_SOURCE_EMC_2X_CLK_DIVISOR, config->value);
src = FIELD_GET(CLK_SOURCE_EMC_2X_CLK_SRC, config->value);
/* do basic sanity checking on the EMC timings */
if (div & 0x1) {
dev_err(dev, "invalid odd divider %u for rate %lu Hz\n",
div, config->rate);
err = -EINVAL;
goto put;
}
same_freq = config->value & CLK_SOURCE_EMC_MC_EMC_SAME_FREQ;
if (same_freq != config->same_freq) {
dev_err(dev,
"ambiguous EMC to MC ratio for rate %lu Hz\n",
config->rate);
err = -EINVAL;
goto put;
}
parent = clk_hw_get_parent_by_index(hw, src);
config->parent = src;
if (src == CLK_SRC_PLLM || src == CLK_SRC_PLLM_UD) {
config->parent_rate = config->rate * (1 + div / 2);
} else {
unsigned long rate = config->rate * (1 + div / 2);
config->parent_rate = clk_hw_get_rate(parent);
if (config->parent_rate != rate) {
dev_err(dev,
"rate %lu Hz does not match input\n",
config->rate);
err = -EINVAL;
goto put;
}
}
}
emc->provider = provider;
return 0;
put:
module_put(provider->owner);
return err;
}
EXPORT_SYMBOL_GPL(tegra210_clk_emc_attach);
void tegra210_clk_emc_detach(struct clk *clk)
{
struct tegra210_clk_emc *emc = to_tegra210_clk_emc(__clk_get_hw(clk));
module_put(emc->provider->owner);
emc->provider = NULL;
}
EXPORT_SYMBOL_GPL(tegra210_clk_emc_detach);