WSL2-Linux-Kernel/arch/mips/kernel/mips-cpc.c

113 строки
2.7 KiB
C
Исходник Обычный вид История

/*
* Copyright (C) 2013 Imagination Technologies
* Author: Paul Burton <paul.burton@imgtec.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#include <linux/errno.h>
MIPS: smp-cps: rework core/VPE initialisation When hotplug and/or a powered down idle state are supported cases will arise where a non-zero VPE must be brought online without VPE 0, and it where multiple VPEs must be onlined simultaneously. This patch prepares for that by: - Splitting struct boot_config into core & VPE boot config structures, allocated one per core or VPE respectively. This allows for multiple VPEs to be onlined simultaneously without clobbering each others configuration. - Indicating which VPEs should be online within a core at any given time using a bitmap. This allows multiple VPEs to be brought online simultaneously and also indicates to VPE 0 whether it should halt after starting any non-zero VPEs that should be online within the core. For example if all VPEs within a core are offlined via hotplug and the user onlines the second VPE within that core: 1) The core will be powered up. 2) VPE 0 will run from the BEV (ie. mips_cps_core_entry) to initialise the core. 3) VPE 0 will start VPE 1 because its bit is set in the cores bitmap. 4) VPE 0 will halt itself because its bit is clear in the cores bitmap. - Moving the core & VPE initialisation to assembly code which does not make any use of the stack. This is because if a non-zero VPE is to be brought online in a powered down core then when VPE 0 of that core runs it may not have a valid stack, and even if it did then it's messy to run through parts of generic kernel code on VPE 0 before starting the correct VPE. Signed-off-by: Paul Burton <paul.burton@imgtec.com>
2014-04-14 15:04:27 +04:00
#include <linux/percpu.h>
#include <linux/spinlock.h>
#include <asm/mips-cps.h>
void __iomem *mips_cpc_base;
static DEFINE_PER_CPU_ALIGNED(spinlock_t, cpc_core_lock);
static DEFINE_PER_CPU_ALIGNED(unsigned long, cpc_core_lock_flags);
phys_addr_t __weak mips_cpc_default_phys_base(void)
{
return 0;
}
/**
* mips_cpc_phys_base - retrieve the physical base address of the CPC
*
* This function returns the physical base address of the Cluster Power
* Controller memory mapped registers, or 0 if no Cluster Power Controller
* is present.
*/
static phys_addr_t mips_cpc_phys_base(void)
{
unsigned long cpc_base;
if (!mips_cm_present())
return 0;
MIPS: CM: Use BIT/GENMASK for register fields, order & drop shifts There's no reason for us not to use BIT() & GENMASK() in asm/mips-cm.h when declaring macros corresponding to register fields. This patch modifies our definitions to do so. The *_SHF definitions are removed entirely - they duplicate information found in the masks, are infrequently used & can be replaced with use of __ffs() where needed. The *_MSK definitions then lose their _MSK suffix which is now somewhat redundant, and users are modified to match. The field definitions are moved to follow the appropriate register's accessor functions, which helps to keep the field definitions in order & to find the appropriate fields for a given register. Whilst here a comment is added describing each register & including its name, which is helpful both for linking the register back to hardware documentation & for grepping purposes. This also cleans up a couple of issues that became obvious as a result of making the changes described above: - We previously had definitions for GCR_Cx_RESET_EXT_BASE & a phony copy of that named GCR_RESET_EXT_BASE - a register which does not exist. The bad definitions were added by commit 497e803ebf98 ("MIPS: smp-cps: Ensure secondary cores start with EVA disabled") and made use of from boot_core(), which is now modified to use the GCR_Cx_RESET_EXT_BASE definitions. - We had a typo in CM_GCR_ERROR_CAUSE_ERRINGO_MSK - we now correctly define this as inFo rather than inGo. Now that we don't duplicate field information between _SHF & _MSK definitions, and keep the fields next to the register accessors, it will be much easier to spot & prevent any similar oddities being introduced in the future. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Thomas Gleixner <tglx@linutronix.de Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17001/ Patchwork: https://patchwork.linux-mips.org/patch/17216/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-13 05:49:27 +03:00
if (!(read_gcr_cpc_status() & CM_GCR_CPC_STATUS_EX))
return 0;
/* If the CPC is already enabled, leave it so */
cpc_base = read_gcr_cpc_base();
MIPS: CM: Use BIT/GENMASK for register fields, order & drop shifts There's no reason for us not to use BIT() & GENMASK() in asm/mips-cm.h when declaring macros corresponding to register fields. This patch modifies our definitions to do so. The *_SHF definitions are removed entirely - they duplicate information found in the masks, are infrequently used & can be replaced with use of __ffs() where needed. The *_MSK definitions then lose their _MSK suffix which is now somewhat redundant, and users are modified to match. The field definitions are moved to follow the appropriate register's accessor functions, which helps to keep the field definitions in order & to find the appropriate fields for a given register. Whilst here a comment is added describing each register & including its name, which is helpful both for linking the register back to hardware documentation & for grepping purposes. This also cleans up a couple of issues that became obvious as a result of making the changes described above: - We previously had definitions for GCR_Cx_RESET_EXT_BASE & a phony copy of that named GCR_RESET_EXT_BASE - a register which does not exist. The bad definitions were added by commit 497e803ebf98 ("MIPS: smp-cps: Ensure secondary cores start with EVA disabled") and made use of from boot_core(), which is now modified to use the GCR_Cx_RESET_EXT_BASE definitions. - We had a typo in CM_GCR_ERROR_CAUSE_ERRINGO_MSK - we now correctly define this as inFo rather than inGo. Now that we don't duplicate field information between _SHF & _MSK definitions, and keep the fields next to the register accessors, it will be much easier to spot & prevent any similar oddities being introduced in the future. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Thomas Gleixner <tglx@linutronix.de Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17001/ Patchwork: https://patchwork.linux-mips.org/patch/17216/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-13 05:49:27 +03:00
if (cpc_base & CM_GCR_CPC_BASE_CPCEN)
return cpc_base & CM_GCR_CPC_BASE_CPCBASE;
/* Otherwise, use the default address */
cpc_base = mips_cpc_default_phys_base();
if (!cpc_base)
return cpc_base;
/* Enable the CPC, mapped at the default address */
MIPS: CM: Use BIT/GENMASK for register fields, order & drop shifts There's no reason for us not to use BIT() & GENMASK() in asm/mips-cm.h when declaring macros corresponding to register fields. This patch modifies our definitions to do so. The *_SHF definitions are removed entirely - they duplicate information found in the masks, are infrequently used & can be replaced with use of __ffs() where needed. The *_MSK definitions then lose their _MSK suffix which is now somewhat redundant, and users are modified to match. The field definitions are moved to follow the appropriate register's accessor functions, which helps to keep the field definitions in order & to find the appropriate fields for a given register. Whilst here a comment is added describing each register & including its name, which is helpful both for linking the register back to hardware documentation & for grepping purposes. This also cleans up a couple of issues that became obvious as a result of making the changes described above: - We previously had definitions for GCR_Cx_RESET_EXT_BASE & a phony copy of that named GCR_RESET_EXT_BASE - a register which does not exist. The bad definitions were added by commit 497e803ebf98 ("MIPS: smp-cps: Ensure secondary cores start with EVA disabled") and made use of from boot_core(), which is now modified to use the GCR_Cx_RESET_EXT_BASE definitions. - We had a typo in CM_GCR_ERROR_CAUSE_ERRINGO_MSK - we now correctly define this as inFo rather than inGo. Now that we don't duplicate field information between _SHF & _MSK definitions, and keep the fields next to the register accessors, it will be much easier to spot & prevent any similar oddities being introduced in the future. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Acked-by: Thomas Gleixner <tglx@linutronix.de Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17001/ Patchwork: https://patchwork.linux-mips.org/patch/17216/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-08-13 05:49:27 +03:00
write_gcr_cpc_base(cpc_base | CM_GCR_CPC_BASE_CPCEN);
return cpc_base;
}
int mips_cpc_probe(void)
{
phys_addr_t addr;
unsigned int cpu;
for_each_possible_cpu(cpu)
spin_lock_init(&per_cpu(cpc_core_lock, cpu));
addr = mips_cpc_phys_base();
if (!addr)
return -ENODEV;
mips_cpc_base = ioremap_nocache(addr, 0x8000);
if (!mips_cpc_base)
return -ENXIO;
return 0;
}
void mips_cpc_lock_other(unsigned int core)
{
unsigned int curr_core;
if (mips_cm_revision() >= CM_REV_CM3)
/* Systems with CM >= 3 lock the CPC via mips_cm_lock_other */
return;
preempt_disable();
curr_core = cpu_core(&current_cpu_data);
spin_lock_irqsave(&per_cpu(cpc_core_lock, curr_core),
per_cpu(cpc_core_lock_flags, curr_core));
write_cpc_cl_other(core << __ffs(CPC_Cx_OTHER_CORENUM));
/*
* Ensure the core-other region reflects the appropriate core &
* VP before any accesses to it occur.
*/
mb();
}
void mips_cpc_unlock_other(void)
{
unsigned int curr_core;
if (mips_cm_revision() >= CM_REV_CM3)
/* Systems with CM >= 3 lock the CPC via mips_cm_lock_other */
return;
curr_core = cpu_core(&current_cpu_data);
spin_unlock_irqrestore(&per_cpu(cpc_core_lock, curr_core),
per_cpu(cpc_core_lock_flags, curr_core));
preempt_enable();
}