um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
|
|
|
/*
|
|
|
|
* Copyright (C) 2020 Intel Corporation
|
|
|
|
* Author: Johannes Berg <johannes@sipsolutions.net>
|
|
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/pci.h>
|
|
|
|
#include <linux/virtio.h>
|
|
|
|
#include <linux/virtio_config.h>
|
|
|
|
#include <linux/logic_iomem.h>
|
|
|
|
#include <linux/irqdomain.h>
|
|
|
|
#include <linux/virtio_pcidev.h>
|
2021-03-05 15:19:59 +03:00
|
|
|
#include <linux/virtio-uml.h>
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/msi.h>
|
|
|
|
#include <asm/unaligned.h>
|
|
|
|
#include <irq_kern.h>
|
|
|
|
|
|
|
|
#define MAX_DEVICES 8
|
|
|
|
#define MAX_MSI_VECTORS 32
|
|
|
|
#define CFG_SPACE_SIZE 4096
|
|
|
|
|
|
|
|
/* for MSI-X we have a 32-bit payload */
|
|
|
|
#define MAX_IRQ_MSG_SIZE (sizeof(struct virtio_pcidev_msg) + sizeof(u32))
|
|
|
|
#define NUM_IRQ_MSGS 10
|
|
|
|
|
|
|
|
#define HANDLE_NO_FREE(ptr) ((void *)((unsigned long)(ptr) | 1))
|
|
|
|
#define HANDLE_IS_NO_FREE(ptr) ((unsigned long)(ptr) & 1)
|
|
|
|
|
|
|
|
struct um_pci_device {
|
|
|
|
struct virtio_device *vdev;
|
|
|
|
|
|
|
|
/* for now just standard BARs */
|
|
|
|
u8 resptr[PCI_STD_NUM_BARS];
|
|
|
|
|
|
|
|
struct virtqueue *cmd_vq, *irq_vq;
|
|
|
|
|
|
|
|
#define UM_PCI_STAT_WAITING 0
|
|
|
|
unsigned long status;
|
|
|
|
|
|
|
|
int irq;
|
|
|
|
};
|
|
|
|
|
|
|
|
struct um_pci_device_reg {
|
|
|
|
struct um_pci_device *dev;
|
|
|
|
void __iomem *iomem;
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct pci_host_bridge *bridge;
|
|
|
|
static DEFINE_MUTEX(um_pci_mtx);
|
|
|
|
static struct um_pci_device_reg um_pci_devices[MAX_DEVICES];
|
|
|
|
static struct fwnode_handle *um_pci_fwnode;
|
|
|
|
static struct irq_domain *um_pci_inner_domain;
|
|
|
|
static struct irq_domain *um_pci_msi_domain;
|
|
|
|
static unsigned long um_pci_msi_used[BITS_TO_LONGS(MAX_MSI_VECTORS)];
|
|
|
|
|
|
|
|
#define UM_VIRT_PCI_MAXDELAY 40000
|
|
|
|
|
2021-08-11 17:58:25 +03:00
|
|
|
struct um_pci_message_buffer {
|
|
|
|
struct virtio_pcidev_msg hdr;
|
|
|
|
u8 data[8];
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct um_pci_message_buffer __percpu *um_pci_msg_bufs;
|
|
|
|
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
static int um_pci_send_cmd(struct um_pci_device *dev,
|
|
|
|
struct virtio_pcidev_msg *cmd,
|
|
|
|
unsigned int cmd_size,
|
|
|
|
const void *extra, unsigned int extra_size,
|
|
|
|
void *out, unsigned int out_size)
|
|
|
|
{
|
|
|
|
struct scatterlist out_sg, extra_sg, in_sg;
|
|
|
|
struct scatterlist *sgs_list[] = {
|
|
|
|
[0] = &out_sg,
|
|
|
|
[1] = extra ? &extra_sg : &in_sg,
|
|
|
|
[2] = extra ? &in_sg : NULL,
|
|
|
|
};
|
2021-08-11 17:58:25 +03:00
|
|
|
struct um_pci_message_buffer *buf;
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
int delay_count = 0;
|
|
|
|
int ret, len;
|
|
|
|
bool posted;
|
|
|
|
|
2021-08-11 17:58:25 +03:00
|
|
|
if (WARN_ON(cmd_size < sizeof(*cmd) || cmd_size > sizeof(*buf)))
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
switch (cmd->op) {
|
|
|
|
case VIRTIO_PCIDEV_OP_CFG_WRITE:
|
|
|
|
case VIRTIO_PCIDEV_OP_MMIO_WRITE:
|
|
|
|
case VIRTIO_PCIDEV_OP_MMIO_MEMSET:
|
|
|
|
/* in PCI, writes are posted, so don't wait */
|
|
|
|
posted = !out;
|
|
|
|
WARN_ON(!posted);
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
posted = false;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
2021-08-11 17:58:25 +03:00
|
|
|
buf = get_cpu_var(um_pci_msg_bufs);
|
|
|
|
memcpy(buf, cmd, cmd_size);
|
|
|
|
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
if (posted) {
|
|
|
|
u8 *ncmd = kmalloc(cmd_size + extra_size, GFP_ATOMIC);
|
|
|
|
|
|
|
|
if (ncmd) {
|
|
|
|
memcpy(ncmd, cmd, cmd_size);
|
|
|
|
if (extra)
|
|
|
|
memcpy(ncmd + cmd_size, extra, extra_size);
|
|
|
|
cmd = (void *)ncmd;
|
|
|
|
cmd_size += extra_size;
|
|
|
|
extra = NULL;
|
|
|
|
extra_size = 0;
|
|
|
|
} else {
|
|
|
|
/* try without allocating memory */
|
|
|
|
posted = false;
|
2021-08-11 17:58:25 +03:00
|
|
|
cmd = (void *)buf;
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
}
|
2021-08-11 17:58:25 +03:00
|
|
|
} else {
|
|
|
|
cmd = (void *)buf;
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
sg_init_one(&out_sg, cmd, cmd_size);
|
|
|
|
if (extra)
|
|
|
|
sg_init_one(&extra_sg, extra, extra_size);
|
|
|
|
if (out)
|
|
|
|
sg_init_one(&in_sg, out, out_size);
|
|
|
|
|
|
|
|
/* add to internal virtio queue */
|
|
|
|
ret = virtqueue_add_sgs(dev->cmd_vq, sgs_list,
|
|
|
|
extra ? 2 : 1,
|
|
|
|
out ? 1 : 0,
|
|
|
|
posted ? cmd : HANDLE_NO_FREE(cmd),
|
|
|
|
GFP_ATOMIC);
|
|
|
|
if (ret)
|
2021-08-11 17:58:25 +03:00
|
|
|
goto out;
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
|
|
|
|
if (posted) {
|
|
|
|
virtqueue_kick(dev->cmd_vq);
|
2021-08-11 17:58:25 +03:00
|
|
|
ret = 0;
|
|
|
|
goto out;
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
/* kick and poll for getting a response on the queue */
|
|
|
|
set_bit(UM_PCI_STAT_WAITING, &dev->status);
|
|
|
|
virtqueue_kick(dev->cmd_vq);
|
|
|
|
|
|
|
|
while (1) {
|
|
|
|
void *completed = virtqueue_get_buf(dev->cmd_vq, &len);
|
|
|
|
|
|
|
|
if (completed == HANDLE_NO_FREE(cmd))
|
|
|
|
break;
|
|
|
|
|
2021-03-05 15:19:59 +03:00
|
|
|
if (completed && !HANDLE_IS_NO_FREE(completed))
|
|
|
|
kfree(completed);
|
|
|
|
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
if (WARN_ONCE(virtqueue_is_broken(dev->cmd_vq) ||
|
|
|
|
++delay_count > UM_VIRT_PCI_MAXDELAY,
|
|
|
|
"um virt-pci delay: %d", delay_count)) {
|
|
|
|
ret = -EIO;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
udelay(1);
|
|
|
|
}
|
|
|
|
clear_bit(UM_PCI_STAT_WAITING, &dev->status);
|
|
|
|
|
2021-08-11 17:58:25 +03:00
|
|
|
out:
|
|
|
|
put_cpu_var(um_pci_msg_bufs);
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static unsigned long um_pci_cfgspace_read(void *priv, unsigned int offset,
|
|
|
|
int size)
|
|
|
|
{
|
|
|
|
struct um_pci_device_reg *reg = priv;
|
|
|
|
struct um_pci_device *dev = reg->dev;
|
|
|
|
struct virtio_pcidev_msg hdr = {
|
|
|
|
.op = VIRTIO_PCIDEV_OP_CFG_READ,
|
|
|
|
.size = size,
|
|
|
|
.addr = offset,
|
|
|
|
};
|
2021-08-11 17:58:25 +03:00
|
|
|
/* buf->data is maximum size - we may only use parts of it */
|
|
|
|
struct um_pci_message_buffer *buf;
|
|
|
|
u8 *data;
|
2021-09-15 21:30:20 +03:00
|
|
|
unsigned long ret = ULONG_MAX;
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
|
|
|
|
if (!dev)
|
2021-09-15 21:30:20 +03:00
|
|
|
return ULONG_MAX;
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
|
2021-08-11 17:58:25 +03:00
|
|
|
buf = get_cpu_var(um_pci_msg_bufs);
|
|
|
|
data = buf->data;
|
|
|
|
|
2021-09-15 21:30:20 +03:00
|
|
|
memset(buf->data, 0xff, sizeof(buf->data));
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
|
|
|
|
switch (size) {
|
|
|
|
case 1:
|
|
|
|
case 2:
|
|
|
|
case 4:
|
|
|
|
#ifdef CONFIG_64BIT
|
|
|
|
case 8:
|
|
|
|
#endif
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
WARN(1, "invalid config space read size %d\n", size);
|
2021-08-11 17:58:25 +03:00
|
|
|
goto out;
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
}
|
|
|
|
|
2021-08-11 17:58:25 +03:00
|
|
|
if (um_pci_send_cmd(dev, &hdr, sizeof(hdr), NULL, 0, data, 8))
|
|
|
|
goto out;
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
|
|
|
|
switch (size) {
|
|
|
|
case 1:
|
2021-08-11 17:58:25 +03:00
|
|
|
ret = data[0];
|
|
|
|
break;
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
case 2:
|
2021-08-11 17:58:25 +03:00
|
|
|
ret = le16_to_cpup((void *)data);
|
|
|
|
break;
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
case 4:
|
2021-08-11 17:58:25 +03:00
|
|
|
ret = le32_to_cpup((void *)data);
|
|
|
|
break;
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
#ifdef CONFIG_64BIT
|
|
|
|
case 8:
|
2021-08-11 17:58:25 +03:00
|
|
|
ret = le64_to_cpup((void *)data);
|
|
|
|
break;
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
#endif
|
|
|
|
default:
|
2021-08-11 17:58:25 +03:00
|
|
|
break;
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
}
|
2021-08-11 17:58:25 +03:00
|
|
|
|
|
|
|
out:
|
|
|
|
put_cpu_var(um_pci_msg_bufs);
|
|
|
|
return ret;
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
static void um_pci_cfgspace_write(void *priv, unsigned int offset, int size,
|
|
|
|
unsigned long val)
|
|
|
|
{
|
|
|
|
struct um_pci_device_reg *reg = priv;
|
|
|
|
struct um_pci_device *dev = reg->dev;
|
|
|
|
struct {
|
|
|
|
struct virtio_pcidev_msg hdr;
|
|
|
|
/* maximum size - we may only use parts of it */
|
|
|
|
u8 data[8];
|
|
|
|
} msg = {
|
|
|
|
.hdr = {
|
|
|
|
.op = VIRTIO_PCIDEV_OP_CFG_WRITE,
|
|
|
|
.size = size,
|
|
|
|
.addr = offset,
|
|
|
|
},
|
|
|
|
};
|
|
|
|
|
|
|
|
if (!dev)
|
|
|
|
return;
|
|
|
|
|
|
|
|
switch (size) {
|
|
|
|
case 1:
|
|
|
|
msg.data[0] = (u8)val;
|
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
put_unaligned_le16(val, (void *)msg.data);
|
|
|
|
break;
|
|
|
|
case 4:
|
|
|
|
put_unaligned_le32(val, (void *)msg.data);
|
|
|
|
break;
|
|
|
|
#ifdef CONFIG_64BIT
|
|
|
|
case 8:
|
|
|
|
put_unaligned_le64(val, (void *)msg.data);
|
|
|
|
break;
|
|
|
|
#endif
|
|
|
|
default:
|
|
|
|
WARN(1, "invalid config space write size %d\n", size);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
WARN_ON(um_pci_send_cmd(dev, &msg.hdr, sizeof(msg), NULL, 0, NULL, 0));
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct logic_iomem_ops um_pci_device_cfgspace_ops = {
|
|
|
|
.read = um_pci_cfgspace_read,
|
|
|
|
.write = um_pci_cfgspace_write,
|
|
|
|
};
|
|
|
|
|
|
|
|
static void um_pci_bar_copy_from(void *priv, void *buffer,
|
|
|
|
unsigned int offset, int size)
|
|
|
|
{
|
|
|
|
u8 *resptr = priv;
|
|
|
|
struct um_pci_device *dev = container_of(resptr - *resptr,
|
|
|
|
struct um_pci_device,
|
|
|
|
resptr[0]);
|
|
|
|
struct virtio_pcidev_msg hdr = {
|
|
|
|
.op = VIRTIO_PCIDEV_OP_MMIO_READ,
|
|
|
|
.bar = *resptr,
|
|
|
|
.size = size,
|
|
|
|
.addr = offset,
|
|
|
|
};
|
|
|
|
|
|
|
|
memset(buffer, 0xff, size);
|
|
|
|
|
|
|
|
um_pci_send_cmd(dev, &hdr, sizeof(hdr), NULL, 0, buffer, size);
|
|
|
|
}
|
|
|
|
|
|
|
|
static unsigned long um_pci_bar_read(void *priv, unsigned int offset,
|
|
|
|
int size)
|
|
|
|
{
|
2021-08-11 17:58:25 +03:00
|
|
|
/* buf->data is maximum size - we may only use parts of it */
|
|
|
|
struct um_pci_message_buffer *buf;
|
|
|
|
u8 *data;
|
2021-09-15 21:30:20 +03:00
|
|
|
unsigned long ret = ULONG_MAX;
|
2021-08-11 17:58:25 +03:00
|
|
|
|
|
|
|
buf = get_cpu_var(um_pci_msg_bufs);
|
|
|
|
data = buf->data;
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
|
|
|
|
switch (size) {
|
|
|
|
case 1:
|
|
|
|
case 2:
|
|
|
|
case 4:
|
|
|
|
#ifdef CONFIG_64BIT
|
|
|
|
case 8:
|
|
|
|
#endif
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
WARN(1, "invalid config space read size %d\n", size);
|
2021-08-11 17:58:25 +03:00
|
|
|
goto out;
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
um_pci_bar_copy_from(priv, data, offset, size);
|
|
|
|
|
|
|
|
switch (size) {
|
|
|
|
case 1:
|
2021-08-11 17:58:25 +03:00
|
|
|
ret = data[0];
|
|
|
|
break;
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
case 2:
|
2021-08-11 17:58:25 +03:00
|
|
|
ret = le16_to_cpup((void *)data);
|
|
|
|
break;
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
case 4:
|
2021-08-11 17:58:25 +03:00
|
|
|
ret = le32_to_cpup((void *)data);
|
|
|
|
break;
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
#ifdef CONFIG_64BIT
|
|
|
|
case 8:
|
2021-08-11 17:58:25 +03:00
|
|
|
ret = le64_to_cpup((void *)data);
|
|
|
|
break;
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
#endif
|
|
|
|
default:
|
2021-08-11 17:58:25 +03:00
|
|
|
break;
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
}
|
2021-08-11 17:58:25 +03:00
|
|
|
|
|
|
|
out:
|
|
|
|
put_cpu_var(um_pci_msg_bufs);
|
|
|
|
return ret;
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
static void um_pci_bar_copy_to(void *priv, unsigned int offset,
|
|
|
|
const void *buffer, int size)
|
|
|
|
{
|
|
|
|
u8 *resptr = priv;
|
|
|
|
struct um_pci_device *dev = container_of(resptr - *resptr,
|
|
|
|
struct um_pci_device,
|
|
|
|
resptr[0]);
|
|
|
|
struct virtio_pcidev_msg hdr = {
|
|
|
|
.op = VIRTIO_PCIDEV_OP_MMIO_WRITE,
|
|
|
|
.bar = *resptr,
|
|
|
|
.size = size,
|
|
|
|
.addr = offset,
|
|
|
|
};
|
|
|
|
|
|
|
|
um_pci_send_cmd(dev, &hdr, sizeof(hdr), buffer, size, NULL, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void um_pci_bar_write(void *priv, unsigned int offset, int size,
|
|
|
|
unsigned long val)
|
|
|
|
{
|
|
|
|
/* maximum size - we may only use parts of it */
|
|
|
|
u8 data[8];
|
|
|
|
|
|
|
|
switch (size) {
|
|
|
|
case 1:
|
|
|
|
data[0] = (u8)val;
|
|
|
|
break;
|
|
|
|
case 2:
|
|
|
|
put_unaligned_le16(val, (void *)data);
|
|
|
|
break;
|
|
|
|
case 4:
|
|
|
|
put_unaligned_le32(val, (void *)data);
|
|
|
|
break;
|
|
|
|
#ifdef CONFIG_64BIT
|
|
|
|
case 8:
|
|
|
|
put_unaligned_le64(val, (void *)data);
|
|
|
|
break;
|
|
|
|
#endif
|
|
|
|
default:
|
|
|
|
WARN(1, "invalid config space write size %d\n", size);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
um_pci_bar_copy_to(priv, offset, data, size);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void um_pci_bar_set(void *priv, unsigned int offset, u8 value, int size)
|
|
|
|
{
|
|
|
|
u8 *resptr = priv;
|
|
|
|
struct um_pci_device *dev = container_of(resptr - *resptr,
|
|
|
|
struct um_pci_device,
|
|
|
|
resptr[0]);
|
|
|
|
struct {
|
|
|
|
struct virtio_pcidev_msg hdr;
|
|
|
|
u8 data;
|
|
|
|
} msg = {
|
|
|
|
.hdr = {
|
|
|
|
.op = VIRTIO_PCIDEV_OP_CFG_WRITE,
|
|
|
|
.bar = *resptr,
|
|
|
|
.size = size,
|
|
|
|
.addr = offset,
|
|
|
|
},
|
|
|
|
.data = value,
|
|
|
|
};
|
|
|
|
|
|
|
|
um_pci_send_cmd(dev, &msg.hdr, sizeof(msg), NULL, 0, NULL, 0);
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct logic_iomem_ops um_pci_device_bar_ops = {
|
|
|
|
.read = um_pci_bar_read,
|
|
|
|
.write = um_pci_bar_write,
|
|
|
|
.set = um_pci_bar_set,
|
|
|
|
.copy_from = um_pci_bar_copy_from,
|
|
|
|
.copy_to = um_pci_bar_copy_to,
|
|
|
|
};
|
|
|
|
|
|
|
|
static void __iomem *um_pci_map_bus(struct pci_bus *bus, unsigned int devfn,
|
|
|
|
int where)
|
|
|
|
{
|
|
|
|
struct um_pci_device_reg *dev;
|
|
|
|
unsigned int busn = bus->number;
|
|
|
|
|
|
|
|
if (busn > 0)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
/* not allowing functions for now ... */
|
|
|
|
if (devfn % 8)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
if (devfn / 8 >= ARRAY_SIZE(um_pci_devices))
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
dev = &um_pci_devices[devfn / 8];
|
|
|
|
if (!dev)
|
|
|
|
return NULL;
|
|
|
|
|
|
|
|
return (void __iomem *)((unsigned long)dev->iomem + where);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct pci_ops um_pci_ops = {
|
|
|
|
.map_bus = um_pci_map_bus,
|
|
|
|
.read = pci_generic_config_read,
|
|
|
|
.write = pci_generic_config_write,
|
|
|
|
};
|
|
|
|
|
|
|
|
static void um_pci_rescan(void)
|
|
|
|
{
|
|
|
|
pci_lock_rescan_remove();
|
|
|
|
pci_rescan_bus(bridge->bus);
|
|
|
|
pci_unlock_rescan_remove();
|
|
|
|
}
|
|
|
|
|
|
|
|
static void um_pci_irq_vq_addbuf(struct virtqueue *vq, void *buf, bool kick)
|
|
|
|
{
|
|
|
|
struct scatterlist sg[1];
|
|
|
|
|
|
|
|
sg_init_one(sg, buf, MAX_IRQ_MSG_SIZE);
|
|
|
|
if (virtqueue_add_inbuf(vq, sg, 1, buf, GFP_ATOMIC))
|
|
|
|
kfree(buf);
|
|
|
|
else if (kick)
|
|
|
|
virtqueue_kick(vq);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void um_pci_handle_irq_message(struct virtqueue *vq,
|
|
|
|
struct virtio_pcidev_msg *msg)
|
|
|
|
{
|
|
|
|
struct virtio_device *vdev = vq->vdev;
|
|
|
|
struct um_pci_device *dev = vdev->priv;
|
|
|
|
|
|
|
|
/* we should properly chain interrupts, but on ARCH=um we don't care */
|
|
|
|
|
|
|
|
switch (msg->op) {
|
|
|
|
case VIRTIO_PCIDEV_OP_INT:
|
|
|
|
generic_handle_irq(dev->irq);
|
|
|
|
break;
|
|
|
|
case VIRTIO_PCIDEV_OP_MSI:
|
|
|
|
/* our MSI message is just the interrupt number */
|
|
|
|
if (msg->size == sizeof(u32))
|
|
|
|
generic_handle_irq(le32_to_cpup((void *)msg->data));
|
|
|
|
else
|
|
|
|
generic_handle_irq(le16_to_cpup((void *)msg->data));
|
|
|
|
break;
|
|
|
|
case VIRTIO_PCIDEV_OP_PME:
|
|
|
|
/* nothing to do - we already woke up due to the message */
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
dev_err(&vdev->dev, "unexpected virt-pci message %d\n", msg->op);
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void um_pci_cmd_vq_cb(struct virtqueue *vq)
|
|
|
|
{
|
|
|
|
struct virtio_device *vdev = vq->vdev;
|
|
|
|
struct um_pci_device *dev = vdev->priv;
|
|
|
|
void *cmd;
|
|
|
|
int len;
|
|
|
|
|
|
|
|
if (test_bit(UM_PCI_STAT_WAITING, &dev->status))
|
|
|
|
return;
|
|
|
|
|
|
|
|
while ((cmd = virtqueue_get_buf(vq, &len))) {
|
|
|
|
if (WARN_ON(HANDLE_IS_NO_FREE(cmd)))
|
|
|
|
continue;
|
|
|
|
kfree(cmd);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void um_pci_irq_vq_cb(struct virtqueue *vq)
|
|
|
|
{
|
|
|
|
struct virtio_pcidev_msg *msg;
|
|
|
|
int len;
|
|
|
|
|
|
|
|
while ((msg = virtqueue_get_buf(vq, &len))) {
|
|
|
|
if (len >= sizeof(*msg))
|
|
|
|
um_pci_handle_irq_message(vq, msg);
|
|
|
|
|
|
|
|
/* recycle the message buffer */
|
|
|
|
um_pci_irq_vq_addbuf(vq, msg, true);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int um_pci_init_vqs(struct um_pci_device *dev)
|
|
|
|
{
|
|
|
|
struct virtqueue *vqs[2];
|
|
|
|
static const char *const names[2] = { "cmd", "irq" };
|
|
|
|
vq_callback_t *cbs[2] = { um_pci_cmd_vq_cb, um_pci_irq_vq_cb };
|
|
|
|
int err, i;
|
|
|
|
|
|
|
|
err = virtio_find_vqs(dev->vdev, 2, vqs, cbs, names, NULL);
|
|
|
|
if (err)
|
|
|
|
return err;
|
|
|
|
|
|
|
|
dev->cmd_vq = vqs[0];
|
|
|
|
dev->irq_vq = vqs[1];
|
|
|
|
|
|
|
|
for (i = 0; i < NUM_IRQ_MSGS; i++) {
|
|
|
|
void *msg = kzalloc(MAX_IRQ_MSG_SIZE, GFP_KERNEL);
|
|
|
|
|
|
|
|
if (msg)
|
|
|
|
um_pci_irq_vq_addbuf(dev->irq_vq, msg, false);
|
|
|
|
}
|
|
|
|
|
|
|
|
virtqueue_kick(dev->irq_vq);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int um_pci_virtio_probe(struct virtio_device *vdev)
|
|
|
|
{
|
|
|
|
struct um_pci_device *dev;
|
|
|
|
int i, free = -1;
|
|
|
|
int err = -ENOSPC;
|
|
|
|
|
|
|
|
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
|
|
|
|
if (!dev)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
dev->vdev = vdev;
|
|
|
|
vdev->priv = dev;
|
|
|
|
|
|
|
|
mutex_lock(&um_pci_mtx);
|
|
|
|
for (i = 0; i < MAX_DEVICES; i++) {
|
|
|
|
if (um_pci_devices[i].dev)
|
|
|
|
continue;
|
|
|
|
free = i;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (free < 0)
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
err = um_pci_init_vqs(dev);
|
|
|
|
if (err)
|
|
|
|
goto error;
|
|
|
|
|
|
|
|
dev->irq = irq_alloc_desc(numa_node_id());
|
|
|
|
if (dev->irq < 0) {
|
|
|
|
err = dev->irq;
|
|
|
|
goto error;
|
|
|
|
}
|
|
|
|
um_pci_devices[free].dev = dev;
|
|
|
|
vdev->priv = dev;
|
|
|
|
|
|
|
|
mutex_unlock(&um_pci_mtx);
|
|
|
|
|
|
|
|
device_set_wakeup_enable(&vdev->dev, true);
|
|
|
|
|
2021-03-05 15:19:59 +03:00
|
|
|
/*
|
|
|
|
* In order to do suspend-resume properly, don't allow VQs
|
|
|
|
* to be suspended.
|
|
|
|
*/
|
|
|
|
virtio_uml_set_no_vq_suspend(vdev, true);
|
|
|
|
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
um_pci_rescan();
|
|
|
|
return 0;
|
|
|
|
error:
|
|
|
|
mutex_unlock(&um_pci_mtx);
|
|
|
|
kfree(dev);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void um_pci_virtio_remove(struct virtio_device *vdev)
|
|
|
|
{
|
|
|
|
struct um_pci_device *dev = vdev->priv;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
/* Stop all virtqueues */
|
2021-10-13 13:55:44 +03:00
|
|
|
virtio_reset_device(vdev);
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
vdev->config->del_vqs(vdev);
|
|
|
|
|
|
|
|
device_set_wakeup_enable(&vdev->dev, false);
|
|
|
|
|
|
|
|
mutex_lock(&um_pci_mtx);
|
|
|
|
for (i = 0; i < MAX_DEVICES; i++) {
|
|
|
|
if (um_pci_devices[i].dev != dev)
|
|
|
|
continue;
|
|
|
|
um_pci_devices[i].dev = NULL;
|
|
|
|
irq_free_desc(dev->irq);
|
|
|
|
}
|
|
|
|
mutex_unlock(&um_pci_mtx);
|
|
|
|
|
|
|
|
um_pci_rescan();
|
|
|
|
|
|
|
|
kfree(dev);
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct virtio_device_id id_table[] = {
|
|
|
|
{ CONFIG_UML_PCI_OVER_VIRTIO_DEVICE_ID, VIRTIO_DEV_ANY_ID },
|
|
|
|
{ 0 },
|
|
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(virtio, id_table);
|
|
|
|
|
|
|
|
static struct virtio_driver um_pci_virtio_driver = {
|
|
|
|
.driver.name = "virtio-pci",
|
|
|
|
.driver.owner = THIS_MODULE,
|
|
|
|
.id_table = id_table,
|
|
|
|
.probe = um_pci_virtio_probe,
|
|
|
|
.remove = um_pci_virtio_remove,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct resource virt_cfgspace_resource = {
|
|
|
|
.name = "PCI config space",
|
|
|
|
.start = 0xf0000000 - MAX_DEVICES * CFG_SPACE_SIZE,
|
|
|
|
.end = 0xf0000000 - 1,
|
|
|
|
.flags = IORESOURCE_MEM,
|
|
|
|
};
|
|
|
|
|
|
|
|
static long um_pci_map_cfgspace(unsigned long offset, size_t size,
|
|
|
|
const struct logic_iomem_ops **ops,
|
|
|
|
void **priv)
|
|
|
|
{
|
|
|
|
if (WARN_ON(size > CFG_SPACE_SIZE || offset % CFG_SPACE_SIZE))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
if (offset / CFG_SPACE_SIZE < MAX_DEVICES) {
|
|
|
|
*ops = &um_pci_device_cfgspace_ops;
|
|
|
|
*priv = &um_pci_devices[offset / CFG_SPACE_SIZE];
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
WARN(1, "cannot map offset 0x%lx/0x%zx\n", offset, size);
|
|
|
|
return -ENOENT;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct logic_iomem_region_ops um_pci_cfgspace_ops = {
|
|
|
|
.map = um_pci_map_cfgspace,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct resource virt_iomem_resource = {
|
|
|
|
.name = "PCI iomem",
|
|
|
|
.start = 0xf0000000,
|
|
|
|
.end = 0xffffffff,
|
|
|
|
.flags = IORESOURCE_MEM,
|
|
|
|
};
|
|
|
|
|
|
|
|
struct um_pci_map_iomem_data {
|
|
|
|
unsigned long offset;
|
|
|
|
size_t size;
|
|
|
|
const struct logic_iomem_ops **ops;
|
|
|
|
void **priv;
|
|
|
|
long ret;
|
|
|
|
};
|
|
|
|
|
|
|
|
static int um_pci_map_iomem_walk(struct pci_dev *pdev, void *_data)
|
|
|
|
{
|
|
|
|
struct um_pci_map_iomem_data *data = _data;
|
|
|
|
struct um_pci_device_reg *reg = &um_pci_devices[pdev->devfn / 8];
|
|
|
|
struct um_pci_device *dev;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
if (!reg->dev)
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
for (i = 0; i < ARRAY_SIZE(dev->resptr); i++) {
|
|
|
|
struct resource *r = &pdev->resource[i];
|
|
|
|
|
|
|
|
if ((r->flags & IORESOURCE_TYPE_BITS) != IORESOURCE_MEM)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* must be the whole or part of the resource,
|
|
|
|
* not allowed to only overlap
|
|
|
|
*/
|
|
|
|
if (data->offset < r->start || data->offset > r->end)
|
|
|
|
continue;
|
|
|
|
if (data->offset + data->size - 1 > r->end)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
dev = reg->dev;
|
|
|
|
*data->ops = &um_pci_device_bar_ops;
|
|
|
|
dev->resptr[i] = i;
|
|
|
|
*data->priv = &dev->resptr[i];
|
|
|
|
data->ret = data->offset - r->start;
|
|
|
|
|
|
|
|
/* no need to continue */
|
|
|
|
return 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static long um_pci_map_iomem(unsigned long offset, size_t size,
|
|
|
|
const struct logic_iomem_ops **ops,
|
|
|
|
void **priv)
|
|
|
|
{
|
|
|
|
struct um_pci_map_iomem_data data = {
|
|
|
|
/* we want the full address here */
|
|
|
|
.offset = offset + virt_iomem_resource.start,
|
|
|
|
.size = size,
|
|
|
|
.ops = ops,
|
|
|
|
.priv = priv,
|
|
|
|
.ret = -ENOENT,
|
|
|
|
};
|
|
|
|
|
|
|
|
pci_walk_bus(bridge->bus, um_pci_map_iomem_walk, &data);
|
|
|
|
return data.ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct logic_iomem_region_ops um_pci_iomem_ops = {
|
|
|
|
.map = um_pci_map_iomem,
|
|
|
|
};
|
|
|
|
|
|
|
|
static void um_pci_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* This is a very low address and not actually valid 'physical' memory
|
|
|
|
* in UML, so we can simply map MSI(-X) vectors to there, it cannot be
|
|
|
|
* legitimately written to by the device in any other way.
|
|
|
|
* We use the (virtual) IRQ number here as the message to simplify the
|
|
|
|
* code that receives the message, where for now we simply trust the
|
|
|
|
* device to send the correct message.
|
|
|
|
*/
|
|
|
|
msg->address_hi = 0;
|
|
|
|
msg->address_lo = 0xa0000;
|
|
|
|
msg->data = data->irq;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct irq_chip um_pci_msi_bottom_irq_chip = {
|
|
|
|
.name = "UM virtio MSI",
|
|
|
|
.irq_compose_msi_msg = um_pci_compose_msi_msg,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int um_pci_inner_domain_alloc(struct irq_domain *domain,
|
|
|
|
unsigned int virq, unsigned int nr_irqs,
|
|
|
|
void *args)
|
|
|
|
{
|
|
|
|
unsigned long bit;
|
|
|
|
|
|
|
|
WARN_ON(nr_irqs != 1);
|
|
|
|
|
|
|
|
mutex_lock(&um_pci_mtx);
|
|
|
|
bit = find_first_zero_bit(um_pci_msi_used, MAX_MSI_VECTORS);
|
|
|
|
if (bit >= MAX_MSI_VECTORS) {
|
|
|
|
mutex_unlock(&um_pci_mtx);
|
|
|
|
return -ENOSPC;
|
|
|
|
}
|
|
|
|
|
|
|
|
set_bit(bit, um_pci_msi_used);
|
|
|
|
mutex_unlock(&um_pci_mtx);
|
|
|
|
|
|
|
|
irq_domain_set_info(domain, virq, bit, &um_pci_msi_bottom_irq_chip,
|
|
|
|
domain->host_data, handle_simple_irq,
|
|
|
|
NULL, NULL);
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void um_pci_inner_domain_free(struct irq_domain *domain,
|
|
|
|
unsigned int virq, unsigned int nr_irqs)
|
|
|
|
{
|
|
|
|
struct irq_data *d = irq_domain_get_irq_data(domain, virq);
|
|
|
|
|
|
|
|
mutex_lock(&um_pci_mtx);
|
|
|
|
|
|
|
|
if (!test_bit(d->hwirq, um_pci_msi_used))
|
|
|
|
pr_err("trying to free unused MSI#%lu\n", d->hwirq);
|
|
|
|
else
|
|
|
|
__clear_bit(d->hwirq, um_pci_msi_used);
|
|
|
|
|
|
|
|
mutex_unlock(&um_pci_mtx);
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct irq_domain_ops um_pci_inner_domain_ops = {
|
|
|
|
.alloc = um_pci_inner_domain_alloc,
|
|
|
|
.free = um_pci_inner_domain_free,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct irq_chip um_pci_msi_irq_chip = {
|
|
|
|
.name = "UM virtio PCIe MSI",
|
|
|
|
.irq_mask = pci_msi_mask_irq,
|
|
|
|
.irq_unmask = pci_msi_unmask_irq,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct msi_domain_info um_pci_msi_domain_info = {
|
|
|
|
.flags = MSI_FLAG_USE_DEF_DOM_OPS |
|
|
|
|
MSI_FLAG_USE_DEF_CHIP_OPS |
|
|
|
|
MSI_FLAG_PCI_MSIX,
|
|
|
|
.chip = &um_pci_msi_irq_chip,
|
|
|
|
};
|
|
|
|
|
|
|
|
static struct resource busn_resource = {
|
|
|
|
.name = "PCI busn",
|
|
|
|
.start = 0,
|
|
|
|
.end = 0,
|
|
|
|
.flags = IORESOURCE_BUS,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int um_pci_map_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
|
|
|
|
{
|
|
|
|
struct um_pci_device_reg *reg = &um_pci_devices[pdev->devfn / 8];
|
|
|
|
|
|
|
|
if (WARN_ON(!reg->dev))
|
|
|
|
return -EINVAL;
|
|
|
|
|
|
|
|
/* Yes, we map all pins to the same IRQ ... doesn't matter for now. */
|
|
|
|
return reg->dev->irq;
|
|
|
|
}
|
|
|
|
|
|
|
|
void *pci_root_bus_fwnode(struct pci_bus *bus)
|
|
|
|
{
|
|
|
|
return um_pci_fwnode;
|
|
|
|
}
|
|
|
|
|
2021-06-25 11:34:34 +03:00
|
|
|
static int um_pci_init(void)
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
{
|
|
|
|
int err, i;
|
|
|
|
|
|
|
|
WARN_ON(logic_iomem_add_region(&virt_cfgspace_resource,
|
|
|
|
&um_pci_cfgspace_ops));
|
|
|
|
WARN_ON(logic_iomem_add_region(&virt_iomem_resource,
|
|
|
|
&um_pci_iomem_ops));
|
|
|
|
|
|
|
|
if (WARN(CONFIG_UML_PCI_OVER_VIRTIO_DEVICE_ID < 0,
|
|
|
|
"No virtio device ID configured for PCI - no PCI support\n"))
|
|
|
|
return 0;
|
|
|
|
|
2021-08-11 17:58:25 +03:00
|
|
|
um_pci_msg_bufs = alloc_percpu(struct um_pci_message_buffer);
|
|
|
|
if (!um_pci_msg_bufs)
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
return -ENOMEM;
|
|
|
|
|
2021-08-11 17:58:25 +03:00
|
|
|
bridge = pci_alloc_host_bridge(0);
|
|
|
|
if (!bridge) {
|
|
|
|
err = -ENOMEM;
|
|
|
|
goto free;
|
|
|
|
}
|
|
|
|
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
um_pci_fwnode = irq_domain_alloc_named_fwnode("um-pci");
|
|
|
|
if (!um_pci_fwnode) {
|
|
|
|
err = -ENOMEM;
|
|
|
|
goto free;
|
|
|
|
}
|
|
|
|
|
|
|
|
um_pci_inner_domain = __irq_domain_add(um_pci_fwnode, MAX_MSI_VECTORS,
|
|
|
|
MAX_MSI_VECTORS, 0,
|
|
|
|
&um_pci_inner_domain_ops, NULL);
|
|
|
|
if (!um_pci_inner_domain) {
|
|
|
|
err = -ENOMEM;
|
|
|
|
goto free;
|
|
|
|
}
|
|
|
|
|
|
|
|
um_pci_msi_domain = pci_msi_create_irq_domain(um_pci_fwnode,
|
|
|
|
&um_pci_msi_domain_info,
|
|
|
|
um_pci_inner_domain);
|
|
|
|
if (!um_pci_msi_domain) {
|
|
|
|
err = -ENOMEM;
|
|
|
|
goto free;
|
|
|
|
}
|
|
|
|
|
|
|
|
pci_add_resource(&bridge->windows, &virt_iomem_resource);
|
|
|
|
pci_add_resource(&bridge->windows, &busn_resource);
|
|
|
|
bridge->ops = &um_pci_ops;
|
|
|
|
bridge->map_irq = um_pci_map_irq;
|
|
|
|
|
|
|
|
for (i = 0; i < MAX_DEVICES; i++) {
|
|
|
|
resource_size_t start;
|
|
|
|
|
|
|
|
start = virt_cfgspace_resource.start + i * CFG_SPACE_SIZE;
|
|
|
|
um_pci_devices[i].iomem = ioremap(start, CFG_SPACE_SIZE);
|
|
|
|
if (WARN(!um_pci_devices[i].iomem, "failed to map %d\n", i)) {
|
|
|
|
err = -ENOMEM;
|
|
|
|
goto free;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
err = pci_host_probe(bridge);
|
|
|
|
if (err)
|
|
|
|
goto free;
|
|
|
|
|
|
|
|
err = register_virtio_driver(&um_pci_virtio_driver);
|
|
|
|
if (err)
|
|
|
|
goto free;
|
|
|
|
return 0;
|
|
|
|
free:
|
|
|
|
if (um_pci_inner_domain)
|
|
|
|
irq_domain_remove(um_pci_inner_domain);
|
|
|
|
if (um_pci_fwnode)
|
|
|
|
irq_domain_free_fwnode(um_pci_fwnode);
|
2021-08-11 17:58:25 +03:00
|
|
|
if (bridge) {
|
|
|
|
pci_free_resource_list(&bridge->windows);
|
|
|
|
pci_free_host_bridge(bridge);
|
|
|
|
}
|
|
|
|
free_percpu(um_pci_msg_bufs);
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
return err;
|
|
|
|
}
|
|
|
|
module_init(um_pci_init);
|
|
|
|
|
2021-06-25 11:34:34 +03:00
|
|
|
static void um_pci_exit(void)
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
{
|
|
|
|
unregister_virtio_driver(&um_pci_virtio_driver);
|
|
|
|
irq_domain_remove(um_pci_msi_domain);
|
|
|
|
irq_domain_remove(um_pci_inner_domain);
|
|
|
|
pci_free_resource_list(&bridge->windows);
|
|
|
|
pci_free_host_bridge(bridge);
|
2021-08-11 17:58:25 +03:00
|
|
|
free_percpu(um_pci_msg_bufs);
|
um: add PCI over virtio emulation driver
To support testing of PCI/PCIe drivers in UML, add a PCI bus
support driver. This driver uses virtio, which in UML is really
just vhost-user, to talk to devices, and adds the devices to
the virtual PCI bus in the system.
Since virtio already allows DMA/bus mastering this really isn't
all that hard, of course we need the logic_iomem infrastructure
that was added by a previous patch.
The protocol to talk to the device is has a few fairly simple
messages for reading to/writing from config and IO spaces, and
messages for the device to send the various interrupts (INT#,
MSI/MSI-X and while suspended PME#).
Note that currently no offical virtio device ID is assigned for
this protocol, as a consequence this patch requires defining it
in the Kconfig, with a default that makes the driver refuse to
work at all.
Finally, in order to add support for MSI/MSI-X interrupts, some
small changes are needed in the UML IRQ code, it needs to have
more interrupts, changing NR_IRQS from 64 to 128 if this driver
is enabled, but not actually use them for anything so that the
generic IRQ domain/MSI infrastructure can allocate IRQ numbers.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-03-05 15:19:58 +03:00
|
|
|
}
|
|
|
|
module_exit(um_pci_exit);
|