WSL2-Linux-Kernel/drivers/platform/x86/apple-gmux.c

839 строки
25 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0-only
/*
* Gmux driver for Apple laptops
*
* Copyright (C) Canonical Ltd. <seth.forshee@canonical.com>
* Copyright (C) 2010-2012 Andreas Heider <andreas@meetr.de>
apple-gmux: Add initial documentation Document what I've learned so far about the gmux so that we can collaboratively reverse-engineer its remaining unknown bits without everyone having to start from scratch. The DOC sections are bound together in the gpu.tmpl DocBook under a new vga_switcheroo "Handlers" chapter. Eventually this should be amended with documentation about the four other handlers that exist so far (nouveau v1 DSM, nouveau Optimus DSM, radeon ATPX, amdgpu ATPX). Requires kernel-doc with asciidoc support. The EFI variable was reverse-engineered by Bruno Bierbaumer <bruno@bierbaumer.net> and Andreas Heider <andreas@meetr.de>. Some of the remaining open questions: * How are vblank intervals synchronized on retinas to achieve seamless switching? Is the DP mux capable of this? It's not mentioned in the data sheets. Or is it done at the OS level, i.e. do we have to synchronize vblank intervals between DRM drivers? There's a signal coming from the panel connector and going into gmux, could this be the vblank signal as received by the panel to properly time the switch? * On retinas there's an I2C bus between gmux and the connector of the right I/O board, apparently leading to the Parade PS8401A HDMI repeater. What is this for, is it controlled via gmux registers? Data sheet: http://www.paradetech.com/products/jitter-cleaning-repeaters/ps8401/ * On retinas there's an I2C bus between gmux and the LED driver. Pre-retinas connected the LED driver to SMBUS. Are there additional gmux registers on retinas to control it? * The MacPro6,1 2013 also has a gmux, the same Renesas R4F2113 as the retina MacBook Pro. The Mac Pro doesn't have a built-in display, so what is its purpose? Power control of the dual FirePro GPUs? Switching of the external DP/Thunderbolt ports? The iFixit teardown clearly shows one TI HD3SS212 DisplayPort mux on the logic board next to one of the three Thunderbolt controllers. However six muxes would be necessary to switch all six ports between GPUs. The mux is probably necessary for one of the display configurations allowed by Apple, but which one? https://www.ifixit.com/Teardown/Mac+Pro+Late+2013+Teardown/20778 https://d3nevzfk7ii3be.cloudfront.net/igi/fELBTnt31QhnDsqq.huge https://support.apple.com/en-us/HT202801 * Registers we haven't decoded yet: 0x700 32 Bit configmap? 0x708 32 Bit power sequence? 0x712 8 Bit status of clock from panel on retinas? 0x713 8 Bit dito? 0x724 16 Bit backlight, raw value? 0x760 32 Bit backlight 0x764 32 Bit backlight 0x768 8 Bit backlight 0x76a 16 Bit backlight 0x76c 16 Bit backlight 0x76e 16 Bit backlight 0x77f edp/dp/hdmi probe? retina only. * Addition by Bruno Prémont <bonbons@linux-vserver.org>: "Missing is also precise knowledge as to what the gmux depends on. From behavioral reports, it is somehow sensitive to VGA IO/MEM routing (it apparently needs the routing to go to integrated GPU, not discrete GPU). When the routing is inappropriate backlight control IO just reads back as 0xFF (and eventually gmux IO in general does so)." Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Darren Hart <dvhart@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/da309e436fbeac886477d80376457b7d83ea4b2d.1452431795.git.lukas@wunner.de Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-11 02:08:35 +03:00
* Copyright (C) 2015 Lukas Wunner <lukas@wunner.de>
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/backlight.h>
#include <linux/acpi.h>
#include <linux/pnp.h>
#include <linux/apple_bl.h>
#include <linux/apple-gmux.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/pci.h>
#include <linux/vga_switcheroo.h>
#include <acpi/video.h>
#include <asm/io.h>
apple-gmux: Add initial documentation Document what I've learned so far about the gmux so that we can collaboratively reverse-engineer its remaining unknown bits without everyone having to start from scratch. The DOC sections are bound together in the gpu.tmpl DocBook under a new vga_switcheroo "Handlers" chapter. Eventually this should be amended with documentation about the four other handlers that exist so far (nouveau v1 DSM, nouveau Optimus DSM, radeon ATPX, amdgpu ATPX). Requires kernel-doc with asciidoc support. The EFI variable was reverse-engineered by Bruno Bierbaumer <bruno@bierbaumer.net> and Andreas Heider <andreas@meetr.de>. Some of the remaining open questions: * How are vblank intervals synchronized on retinas to achieve seamless switching? Is the DP mux capable of this? It's not mentioned in the data sheets. Or is it done at the OS level, i.e. do we have to synchronize vblank intervals between DRM drivers? There's a signal coming from the panel connector and going into gmux, could this be the vblank signal as received by the panel to properly time the switch? * On retinas there's an I2C bus between gmux and the connector of the right I/O board, apparently leading to the Parade PS8401A HDMI repeater. What is this for, is it controlled via gmux registers? Data sheet: http://www.paradetech.com/products/jitter-cleaning-repeaters/ps8401/ * On retinas there's an I2C bus between gmux and the LED driver. Pre-retinas connected the LED driver to SMBUS. Are there additional gmux registers on retinas to control it? * The MacPro6,1 2013 also has a gmux, the same Renesas R4F2113 as the retina MacBook Pro. The Mac Pro doesn't have a built-in display, so what is its purpose? Power control of the dual FirePro GPUs? Switching of the external DP/Thunderbolt ports? The iFixit teardown clearly shows one TI HD3SS212 DisplayPort mux on the logic board next to one of the three Thunderbolt controllers. However six muxes would be necessary to switch all six ports between GPUs. The mux is probably necessary for one of the display configurations allowed by Apple, but which one? https://www.ifixit.com/Teardown/Mac+Pro+Late+2013+Teardown/20778 https://d3nevzfk7ii3be.cloudfront.net/igi/fELBTnt31QhnDsqq.huge https://support.apple.com/en-us/HT202801 * Registers we haven't decoded yet: 0x700 32 Bit configmap? 0x708 32 Bit power sequence? 0x712 8 Bit status of clock from panel on retinas? 0x713 8 Bit dito? 0x724 16 Bit backlight, raw value? 0x760 32 Bit backlight 0x764 32 Bit backlight 0x768 8 Bit backlight 0x76a 16 Bit backlight 0x76c 16 Bit backlight 0x76e 16 Bit backlight 0x77f edp/dp/hdmi probe? retina only. * Addition by Bruno Prémont <bonbons@linux-vserver.org>: "Missing is also precise knowledge as to what the gmux depends on. From behavioral reports, it is somehow sensitive to VGA IO/MEM routing (it apparently needs the routing to go to integrated GPU, not discrete GPU). When the routing is inappropriate backlight control IO just reads back as 0xFF (and eventually gmux IO in general does so)." Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Darren Hart <dvhart@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/da309e436fbeac886477d80376457b7d83ea4b2d.1452431795.git.lukas@wunner.de Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-11 02:08:35 +03:00
/**
* DOC: Overview
*
* gmux is a microcontroller built into the MacBook Pro to support dual GPUs:
* A `Lattice XP2`_ on pre-retinas, a `Renesas R4F2113`_ on retinas.
apple-gmux: Add initial documentation Document what I've learned so far about the gmux so that we can collaboratively reverse-engineer its remaining unknown bits without everyone having to start from scratch. The DOC sections are bound together in the gpu.tmpl DocBook under a new vga_switcheroo "Handlers" chapter. Eventually this should be amended with documentation about the four other handlers that exist so far (nouveau v1 DSM, nouveau Optimus DSM, radeon ATPX, amdgpu ATPX). Requires kernel-doc with asciidoc support. The EFI variable was reverse-engineered by Bruno Bierbaumer <bruno@bierbaumer.net> and Andreas Heider <andreas@meetr.de>. Some of the remaining open questions: * How are vblank intervals synchronized on retinas to achieve seamless switching? Is the DP mux capable of this? It's not mentioned in the data sheets. Or is it done at the OS level, i.e. do we have to synchronize vblank intervals between DRM drivers? There's a signal coming from the panel connector and going into gmux, could this be the vblank signal as received by the panel to properly time the switch? * On retinas there's an I2C bus between gmux and the connector of the right I/O board, apparently leading to the Parade PS8401A HDMI repeater. What is this for, is it controlled via gmux registers? Data sheet: http://www.paradetech.com/products/jitter-cleaning-repeaters/ps8401/ * On retinas there's an I2C bus between gmux and the LED driver. Pre-retinas connected the LED driver to SMBUS. Are there additional gmux registers on retinas to control it? * The MacPro6,1 2013 also has a gmux, the same Renesas R4F2113 as the retina MacBook Pro. The Mac Pro doesn't have a built-in display, so what is its purpose? Power control of the dual FirePro GPUs? Switching of the external DP/Thunderbolt ports? The iFixit teardown clearly shows one TI HD3SS212 DisplayPort mux on the logic board next to one of the three Thunderbolt controllers. However six muxes would be necessary to switch all six ports between GPUs. The mux is probably necessary for one of the display configurations allowed by Apple, but which one? https://www.ifixit.com/Teardown/Mac+Pro+Late+2013+Teardown/20778 https://d3nevzfk7ii3be.cloudfront.net/igi/fELBTnt31QhnDsqq.huge https://support.apple.com/en-us/HT202801 * Registers we haven't decoded yet: 0x700 32 Bit configmap? 0x708 32 Bit power sequence? 0x712 8 Bit status of clock from panel on retinas? 0x713 8 Bit dito? 0x724 16 Bit backlight, raw value? 0x760 32 Bit backlight 0x764 32 Bit backlight 0x768 8 Bit backlight 0x76a 16 Bit backlight 0x76c 16 Bit backlight 0x76e 16 Bit backlight 0x77f edp/dp/hdmi probe? retina only. * Addition by Bruno Prémont <bonbons@linux-vserver.org>: "Missing is also precise knowledge as to what the gmux depends on. From behavioral reports, it is somehow sensitive to VGA IO/MEM routing (it apparently needs the routing to go to integrated GPU, not discrete GPU). When the routing is inappropriate backlight control IO just reads back as 0xFF (and eventually gmux IO in general does so)." Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Darren Hart <dvhart@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/da309e436fbeac886477d80376457b7d83ea4b2d.1452431795.git.lukas@wunner.de Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-11 02:08:35 +03:00
*
* (The MacPro6,1 2013 also has a gmux, however it is unclear why since it has
* dual GPUs but no built-in display.)
*
* gmux is connected to the LPC bus of the southbridge. Its I/O ports are
* accessed differently depending on the microcontroller: Driver functions
* to access a pre-retina gmux are infixed ``_pio_``, those for a retina gmux
* are infixed ``_index_``.
*
* .. _Lattice XP2:
* http://www.latticesemi.com/en/Products/FPGAandCPLD/LatticeXP2.aspx
* .. _Renesas R4F2113:
* http://www.renesas.com/products/mpumcu/h8s/h8s2100/h8s2113/index.jsp
apple-gmux: Add initial documentation Document what I've learned so far about the gmux so that we can collaboratively reverse-engineer its remaining unknown bits without everyone having to start from scratch. The DOC sections are bound together in the gpu.tmpl DocBook under a new vga_switcheroo "Handlers" chapter. Eventually this should be amended with documentation about the four other handlers that exist so far (nouveau v1 DSM, nouveau Optimus DSM, radeon ATPX, amdgpu ATPX). Requires kernel-doc with asciidoc support. The EFI variable was reverse-engineered by Bruno Bierbaumer <bruno@bierbaumer.net> and Andreas Heider <andreas@meetr.de>. Some of the remaining open questions: * How are vblank intervals synchronized on retinas to achieve seamless switching? Is the DP mux capable of this? It's not mentioned in the data sheets. Or is it done at the OS level, i.e. do we have to synchronize vblank intervals between DRM drivers? There's a signal coming from the panel connector and going into gmux, could this be the vblank signal as received by the panel to properly time the switch? * On retinas there's an I2C bus between gmux and the connector of the right I/O board, apparently leading to the Parade PS8401A HDMI repeater. What is this for, is it controlled via gmux registers? Data sheet: http://www.paradetech.com/products/jitter-cleaning-repeaters/ps8401/ * On retinas there's an I2C bus between gmux and the LED driver. Pre-retinas connected the LED driver to SMBUS. Are there additional gmux registers on retinas to control it? * The MacPro6,1 2013 also has a gmux, the same Renesas R4F2113 as the retina MacBook Pro. The Mac Pro doesn't have a built-in display, so what is its purpose? Power control of the dual FirePro GPUs? Switching of the external DP/Thunderbolt ports? The iFixit teardown clearly shows one TI HD3SS212 DisplayPort mux on the logic board next to one of the three Thunderbolt controllers. However six muxes would be necessary to switch all six ports between GPUs. The mux is probably necessary for one of the display configurations allowed by Apple, but which one? https://www.ifixit.com/Teardown/Mac+Pro+Late+2013+Teardown/20778 https://d3nevzfk7ii3be.cloudfront.net/igi/fELBTnt31QhnDsqq.huge https://support.apple.com/en-us/HT202801 * Registers we haven't decoded yet: 0x700 32 Bit configmap? 0x708 32 Bit power sequence? 0x712 8 Bit status of clock from panel on retinas? 0x713 8 Bit dito? 0x724 16 Bit backlight, raw value? 0x760 32 Bit backlight 0x764 32 Bit backlight 0x768 8 Bit backlight 0x76a 16 Bit backlight 0x76c 16 Bit backlight 0x76e 16 Bit backlight 0x77f edp/dp/hdmi probe? retina only. * Addition by Bruno Prémont <bonbons@linux-vserver.org>: "Missing is also precise knowledge as to what the gmux depends on. From behavioral reports, it is somehow sensitive to VGA IO/MEM routing (it apparently needs the routing to go to integrated GPU, not discrete GPU). When the routing is inappropriate backlight control IO just reads back as 0xFF (and eventually gmux IO in general does so)." Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Darren Hart <dvhart@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/da309e436fbeac886477d80376457b7d83ea4b2d.1452431795.git.lukas@wunner.de Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-11 02:08:35 +03:00
*/
struct apple_gmux_data {
unsigned long iostart;
unsigned long iolen;
bool indexed;
struct mutex index_lock;
struct backlight_device *bdev;
/* switcheroo data */
acpi_handle dhandle;
int gpe;
bool external_switchable;
apple-gmux: Track switch state gmux has 3 switch registers: * GMUX_PORT_SWITCH_DISPLAY switches the panel * GMUX_PORT_SWITCH_DDC switches the panel's DDC lines (only on pre-retinas; on retinas this is a no-op) * GMUX_PORT_SWITCH_EXTERNAL switches the external DP port(s) (only on models without Thunderbolt, i.e. introduced before 2011; those with Thunderbolt switch only HPD/AUX, not the main link) Currently we switch all 3 registers in unison. gmux does not preserve the switch state during suspend, so we currently read GMUX_PORT_SWITCH_DISPLAY before suspend and restore all 3 registers to this value on resume. With the upcoming ->switch_ddc callback, GMUX_PORT_SWITCH_DDC may temporarily contain a different value than the other 2 registers. If we happen to suspend at this moment, we'll write an incorrect value to GMUX_PORT_SWITCH_DDC on resume. Also, on models with Thunderbolt the integrated GPU is unable to drive the external DP port(s), so we want to keep GMUX_PORT_SWITCH_EXTERNAL permanently switched to the discrete GPU on those machines. Consequently we can no longer assume that GMUX_PORT_SWITCH_DISPLAY represents the correct value for all 3 registers on suspend. Track the state of all 3 registers: Add gmux_read_switch_state() and gmux_write_switch_state(). Instead of reading the switch state on every suspend, read it once on driver initialization so that we know the current switch state all the time. (This allows us to use some optimizations and shortcuts, e.g. we can skip switching DDC if we know that it's already switched to the requested GPU.) Change the ->switchto callback to use gmux_write_switch_state(). Tested-by: Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/5679f414cb0ddf1654dcc359571f3764b275edf0.1452525860.git.lukas@wunner.de
2016-01-11 22:09:20 +03:00
enum vga_switcheroo_client_id switch_state_display;
enum vga_switcheroo_client_id switch_state_ddc;
enum vga_switcheroo_client_id switch_state_external;
enum vga_switcheroo_state power_state;
struct completion powerchange_done;
};
static struct apple_gmux_data *apple_gmux_data;
/*
* gmux port offsets. Many of these are not yet used, but may be in the
* future, and it's useful to have them documented here anyhow.
*/
#define GMUX_PORT_VERSION_MAJOR 0x04
#define GMUX_PORT_VERSION_MINOR 0x05
#define GMUX_PORT_VERSION_RELEASE 0x06
#define GMUX_PORT_SWITCH_DISPLAY 0x10
#define GMUX_PORT_SWITCH_GET_DISPLAY 0x11
#define GMUX_PORT_INTERRUPT_ENABLE 0x14
#define GMUX_PORT_INTERRUPT_STATUS 0x16
#define GMUX_PORT_SWITCH_DDC 0x28
#define GMUX_PORT_SWITCH_EXTERNAL 0x40
#define GMUX_PORT_SWITCH_GET_EXTERNAL 0x41
#define GMUX_PORT_DISCRETE_POWER 0x50
#define GMUX_PORT_MAX_BRIGHTNESS 0x70
#define GMUX_PORT_BRIGHTNESS 0x74
#define GMUX_PORT_VALUE 0xc2
#define GMUX_PORT_READ 0xd0
#define GMUX_PORT_WRITE 0xd4
#define GMUX_MIN_IO_LEN (GMUX_PORT_BRIGHTNESS + 4)
#define GMUX_INTERRUPT_ENABLE 0xff
#define GMUX_INTERRUPT_DISABLE 0x00
#define GMUX_INTERRUPT_STATUS_ACTIVE 0
#define GMUX_INTERRUPT_STATUS_DISPLAY (1 << 0)
#define GMUX_INTERRUPT_STATUS_POWER (1 << 2)
#define GMUX_INTERRUPT_STATUS_HOTPLUG (1 << 3)
#define GMUX_BRIGHTNESS_MASK 0x00ffffff
#define GMUX_MAX_BRIGHTNESS GMUX_BRIGHTNESS_MASK
static u8 gmux_pio_read8(struct apple_gmux_data *gmux_data, int port)
{
return inb(gmux_data->iostart + port);
}
static void gmux_pio_write8(struct apple_gmux_data *gmux_data, int port,
u8 val)
{
outb(val, gmux_data->iostart + port);
}
static u32 gmux_pio_read32(struct apple_gmux_data *gmux_data, int port)
{
return inl(gmux_data->iostart + port);
}
static void gmux_pio_write32(struct apple_gmux_data *gmux_data, int port,
u32 val)
{
int i;
u8 tmpval;
for (i = 0; i < 4; i++) {
tmpval = (val >> (i * 8)) & 0xff;
outb(tmpval, gmux_data->iostart + port + i);
}
}
static int gmux_index_wait_ready(struct apple_gmux_data *gmux_data)
{
int i = 200;
u8 gwr = inb(gmux_data->iostart + GMUX_PORT_WRITE);
while (i && (gwr & 0x01)) {
inb(gmux_data->iostart + GMUX_PORT_READ);
gwr = inb(gmux_data->iostart + GMUX_PORT_WRITE);
udelay(100);
i--;
}
return !!i;
}
static int gmux_index_wait_complete(struct apple_gmux_data *gmux_data)
{
int i = 200;
u8 gwr = inb(gmux_data->iostart + GMUX_PORT_WRITE);
while (i && !(gwr & 0x01)) {
gwr = inb(gmux_data->iostart + GMUX_PORT_WRITE);
udelay(100);
i--;
}
if (gwr & 0x01)
inb(gmux_data->iostart + GMUX_PORT_READ);
return !!i;
}
static u8 gmux_index_read8(struct apple_gmux_data *gmux_data, int port)
{
u8 val;
mutex_lock(&gmux_data->index_lock);
gmux_index_wait_ready(gmux_data);
outb((port & 0xff), gmux_data->iostart + GMUX_PORT_READ);
gmux_index_wait_complete(gmux_data);
val = inb(gmux_data->iostart + GMUX_PORT_VALUE);
mutex_unlock(&gmux_data->index_lock);
return val;
}
static void gmux_index_write8(struct apple_gmux_data *gmux_data, int port,
u8 val)
{
mutex_lock(&gmux_data->index_lock);
outb(val, gmux_data->iostart + GMUX_PORT_VALUE);
gmux_index_wait_ready(gmux_data);
outb(port & 0xff, gmux_data->iostart + GMUX_PORT_WRITE);
gmux_index_wait_complete(gmux_data);
mutex_unlock(&gmux_data->index_lock);
}
static u32 gmux_index_read32(struct apple_gmux_data *gmux_data, int port)
{
u32 val;
mutex_lock(&gmux_data->index_lock);
gmux_index_wait_ready(gmux_data);
outb((port & 0xff), gmux_data->iostart + GMUX_PORT_READ);
gmux_index_wait_complete(gmux_data);
val = inl(gmux_data->iostart + GMUX_PORT_VALUE);
mutex_unlock(&gmux_data->index_lock);
return val;
}
static void gmux_index_write32(struct apple_gmux_data *gmux_data, int port,
u32 val)
{
int i;
u8 tmpval;
mutex_lock(&gmux_data->index_lock);
for (i = 0; i < 4; i++) {
tmpval = (val >> (i * 8)) & 0xff;
outb(tmpval, gmux_data->iostart + GMUX_PORT_VALUE + i);
}
gmux_index_wait_ready(gmux_data);
outb(port & 0xff, gmux_data->iostart + GMUX_PORT_WRITE);
gmux_index_wait_complete(gmux_data);
mutex_unlock(&gmux_data->index_lock);
}
static u8 gmux_read8(struct apple_gmux_data *gmux_data, int port)
{
if (gmux_data->indexed)
return gmux_index_read8(gmux_data, port);
else
return gmux_pio_read8(gmux_data, port);
}
static void gmux_write8(struct apple_gmux_data *gmux_data, int port, u8 val)
{
if (gmux_data->indexed)
gmux_index_write8(gmux_data, port, val);
else
gmux_pio_write8(gmux_data, port, val);
}
static u32 gmux_read32(struct apple_gmux_data *gmux_data, int port)
{
if (gmux_data->indexed)
return gmux_index_read32(gmux_data, port);
else
return gmux_pio_read32(gmux_data, port);
}
static void gmux_write32(struct apple_gmux_data *gmux_data, int port,
u32 val)
{
if (gmux_data->indexed)
gmux_index_write32(gmux_data, port, val);
else
gmux_pio_write32(gmux_data, port, val);
}
static bool gmux_is_indexed(struct apple_gmux_data *gmux_data)
{
u16 val;
outb(0xaa, gmux_data->iostart + 0xcc);
outb(0x55, gmux_data->iostart + 0xcd);
outb(0x00, gmux_data->iostart + 0xce);
val = inb(gmux_data->iostart + 0xcc) |
(inb(gmux_data->iostart + 0xcd) << 8);
if (val == 0x55aa)
return true;
return false;
}
apple-gmux: Add initial documentation Document what I've learned so far about the gmux so that we can collaboratively reverse-engineer its remaining unknown bits without everyone having to start from scratch. The DOC sections are bound together in the gpu.tmpl DocBook under a new vga_switcheroo "Handlers" chapter. Eventually this should be amended with documentation about the four other handlers that exist so far (nouveau v1 DSM, nouveau Optimus DSM, radeon ATPX, amdgpu ATPX). Requires kernel-doc with asciidoc support. The EFI variable was reverse-engineered by Bruno Bierbaumer <bruno@bierbaumer.net> and Andreas Heider <andreas@meetr.de>. Some of the remaining open questions: * How are vblank intervals synchronized on retinas to achieve seamless switching? Is the DP mux capable of this? It's not mentioned in the data sheets. Or is it done at the OS level, i.e. do we have to synchronize vblank intervals between DRM drivers? There's a signal coming from the panel connector and going into gmux, could this be the vblank signal as received by the panel to properly time the switch? * On retinas there's an I2C bus between gmux and the connector of the right I/O board, apparently leading to the Parade PS8401A HDMI repeater. What is this for, is it controlled via gmux registers? Data sheet: http://www.paradetech.com/products/jitter-cleaning-repeaters/ps8401/ * On retinas there's an I2C bus between gmux and the LED driver. Pre-retinas connected the LED driver to SMBUS. Are there additional gmux registers on retinas to control it? * The MacPro6,1 2013 also has a gmux, the same Renesas R4F2113 as the retina MacBook Pro. The Mac Pro doesn't have a built-in display, so what is its purpose? Power control of the dual FirePro GPUs? Switching of the external DP/Thunderbolt ports? The iFixit teardown clearly shows one TI HD3SS212 DisplayPort mux on the logic board next to one of the three Thunderbolt controllers. However six muxes would be necessary to switch all six ports between GPUs. The mux is probably necessary for one of the display configurations allowed by Apple, but which one? https://www.ifixit.com/Teardown/Mac+Pro+Late+2013+Teardown/20778 https://d3nevzfk7ii3be.cloudfront.net/igi/fELBTnt31QhnDsqq.huge https://support.apple.com/en-us/HT202801 * Registers we haven't decoded yet: 0x700 32 Bit configmap? 0x708 32 Bit power sequence? 0x712 8 Bit status of clock from panel on retinas? 0x713 8 Bit dito? 0x724 16 Bit backlight, raw value? 0x760 32 Bit backlight 0x764 32 Bit backlight 0x768 8 Bit backlight 0x76a 16 Bit backlight 0x76c 16 Bit backlight 0x76e 16 Bit backlight 0x77f edp/dp/hdmi probe? retina only. * Addition by Bruno Prémont <bonbons@linux-vserver.org>: "Missing is also precise knowledge as to what the gmux depends on. From behavioral reports, it is somehow sensitive to VGA IO/MEM routing (it apparently needs the routing to go to integrated GPU, not discrete GPU). When the routing is inappropriate backlight control IO just reads back as 0xFF (and eventually gmux IO in general does so)." Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Darren Hart <dvhart@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/da309e436fbeac886477d80376457b7d83ea4b2d.1452431795.git.lukas@wunner.de Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-11 02:08:35 +03:00
/**
* DOC: Backlight control
*
* On single GPU MacBooks, the PWM signal for the backlight is generated by
* the GPU. On dual GPU MacBook Pros by contrast, either GPU may be suspended
* to conserve energy. Hence the PWM signal needs to be generated by a separate
* backlight driver which is controlled by gmux. The earliest generation
* MBP5 2008/09 uses a `TI LP8543`_ backlight driver. All newer models
* use a `TI LP8545`_.
*
* .. _TI LP8543: https://www.ti.com/lit/ds/symlink/lp8543.pdf
* .. _TI LP8545: https://www.ti.com/lit/ds/symlink/lp8545.pdf
apple-gmux: Add initial documentation Document what I've learned so far about the gmux so that we can collaboratively reverse-engineer its remaining unknown bits without everyone having to start from scratch. The DOC sections are bound together in the gpu.tmpl DocBook under a new vga_switcheroo "Handlers" chapter. Eventually this should be amended with documentation about the four other handlers that exist so far (nouveau v1 DSM, nouveau Optimus DSM, radeon ATPX, amdgpu ATPX). Requires kernel-doc with asciidoc support. The EFI variable was reverse-engineered by Bruno Bierbaumer <bruno@bierbaumer.net> and Andreas Heider <andreas@meetr.de>. Some of the remaining open questions: * How are vblank intervals synchronized on retinas to achieve seamless switching? Is the DP mux capable of this? It's not mentioned in the data sheets. Or is it done at the OS level, i.e. do we have to synchronize vblank intervals between DRM drivers? There's a signal coming from the panel connector and going into gmux, could this be the vblank signal as received by the panel to properly time the switch? * On retinas there's an I2C bus between gmux and the connector of the right I/O board, apparently leading to the Parade PS8401A HDMI repeater. What is this for, is it controlled via gmux registers? Data sheet: http://www.paradetech.com/products/jitter-cleaning-repeaters/ps8401/ * On retinas there's an I2C bus between gmux and the LED driver. Pre-retinas connected the LED driver to SMBUS. Are there additional gmux registers on retinas to control it? * The MacPro6,1 2013 also has a gmux, the same Renesas R4F2113 as the retina MacBook Pro. The Mac Pro doesn't have a built-in display, so what is its purpose? Power control of the dual FirePro GPUs? Switching of the external DP/Thunderbolt ports? The iFixit teardown clearly shows one TI HD3SS212 DisplayPort mux on the logic board next to one of the three Thunderbolt controllers. However six muxes would be necessary to switch all six ports between GPUs. The mux is probably necessary for one of the display configurations allowed by Apple, but which one? https://www.ifixit.com/Teardown/Mac+Pro+Late+2013+Teardown/20778 https://d3nevzfk7ii3be.cloudfront.net/igi/fELBTnt31QhnDsqq.huge https://support.apple.com/en-us/HT202801 * Registers we haven't decoded yet: 0x700 32 Bit configmap? 0x708 32 Bit power sequence? 0x712 8 Bit status of clock from panel on retinas? 0x713 8 Bit dito? 0x724 16 Bit backlight, raw value? 0x760 32 Bit backlight 0x764 32 Bit backlight 0x768 8 Bit backlight 0x76a 16 Bit backlight 0x76c 16 Bit backlight 0x76e 16 Bit backlight 0x77f edp/dp/hdmi probe? retina only. * Addition by Bruno Prémont <bonbons@linux-vserver.org>: "Missing is also precise knowledge as to what the gmux depends on. From behavioral reports, it is somehow sensitive to VGA IO/MEM routing (it apparently needs the routing to go to integrated GPU, not discrete GPU). When the routing is inappropriate backlight control IO just reads back as 0xFF (and eventually gmux IO in general does so)." Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Darren Hart <dvhart@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/da309e436fbeac886477d80376457b7d83ea4b2d.1452431795.git.lukas@wunner.de Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-11 02:08:35 +03:00
*/
static int gmux_get_brightness(struct backlight_device *bd)
{
struct apple_gmux_data *gmux_data = bl_get_data(bd);
return gmux_read32(gmux_data, GMUX_PORT_BRIGHTNESS) &
GMUX_BRIGHTNESS_MASK;
}
static int gmux_update_status(struct backlight_device *bd)
{
struct apple_gmux_data *gmux_data = bl_get_data(bd);
u32 brightness = bd->props.brightness;
if (bd->props.state & BL_CORE_SUSPENDED)
return 0;
gmux_write32(gmux_data, GMUX_PORT_BRIGHTNESS, brightness);
return 0;
}
static const struct backlight_ops gmux_bl_ops = {
.options = BL_CORE_SUSPENDRESUME,
.get_brightness = gmux_get_brightness,
.update_status = gmux_update_status,
};
apple-gmux: Add initial documentation Document what I've learned so far about the gmux so that we can collaboratively reverse-engineer its remaining unknown bits without everyone having to start from scratch. The DOC sections are bound together in the gpu.tmpl DocBook under a new vga_switcheroo "Handlers" chapter. Eventually this should be amended with documentation about the four other handlers that exist so far (nouveau v1 DSM, nouveau Optimus DSM, radeon ATPX, amdgpu ATPX). Requires kernel-doc with asciidoc support. The EFI variable was reverse-engineered by Bruno Bierbaumer <bruno@bierbaumer.net> and Andreas Heider <andreas@meetr.de>. Some of the remaining open questions: * How are vblank intervals synchronized on retinas to achieve seamless switching? Is the DP mux capable of this? It's not mentioned in the data sheets. Or is it done at the OS level, i.e. do we have to synchronize vblank intervals between DRM drivers? There's a signal coming from the panel connector and going into gmux, could this be the vblank signal as received by the panel to properly time the switch? * On retinas there's an I2C bus between gmux and the connector of the right I/O board, apparently leading to the Parade PS8401A HDMI repeater. What is this for, is it controlled via gmux registers? Data sheet: http://www.paradetech.com/products/jitter-cleaning-repeaters/ps8401/ * On retinas there's an I2C bus between gmux and the LED driver. Pre-retinas connected the LED driver to SMBUS. Are there additional gmux registers on retinas to control it? * The MacPro6,1 2013 also has a gmux, the same Renesas R4F2113 as the retina MacBook Pro. The Mac Pro doesn't have a built-in display, so what is its purpose? Power control of the dual FirePro GPUs? Switching of the external DP/Thunderbolt ports? The iFixit teardown clearly shows one TI HD3SS212 DisplayPort mux on the logic board next to one of the three Thunderbolt controllers. However six muxes would be necessary to switch all six ports between GPUs. The mux is probably necessary for one of the display configurations allowed by Apple, but which one? https://www.ifixit.com/Teardown/Mac+Pro+Late+2013+Teardown/20778 https://d3nevzfk7ii3be.cloudfront.net/igi/fELBTnt31QhnDsqq.huge https://support.apple.com/en-us/HT202801 * Registers we haven't decoded yet: 0x700 32 Bit configmap? 0x708 32 Bit power sequence? 0x712 8 Bit status of clock from panel on retinas? 0x713 8 Bit dito? 0x724 16 Bit backlight, raw value? 0x760 32 Bit backlight 0x764 32 Bit backlight 0x768 8 Bit backlight 0x76a 16 Bit backlight 0x76c 16 Bit backlight 0x76e 16 Bit backlight 0x77f edp/dp/hdmi probe? retina only. * Addition by Bruno Prémont <bonbons@linux-vserver.org>: "Missing is also precise knowledge as to what the gmux depends on. From behavioral reports, it is somehow sensitive to VGA IO/MEM routing (it apparently needs the routing to go to integrated GPU, not discrete GPU). When the routing is inappropriate backlight control IO just reads back as 0xFF (and eventually gmux IO in general does so)." Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Darren Hart <dvhart@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/da309e436fbeac886477d80376457b7d83ea4b2d.1452431795.git.lukas@wunner.de Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-11 02:08:35 +03:00
/**
* DOC: Graphics mux
*
* On pre-retinas, the LVDS outputs of both GPUs feed into gmux which muxes
* either of them to the panel. One of the tricks gmux has up its sleeve is
* to lengthen the blanking interval of its output during a switch to
* synchronize it with the GPU switched to. This allows for a flicker-free
* switch that is imperceptible by the user (`US 8,687,007 B2`_).
apple-gmux: Add initial documentation Document what I've learned so far about the gmux so that we can collaboratively reverse-engineer its remaining unknown bits without everyone having to start from scratch. The DOC sections are bound together in the gpu.tmpl DocBook under a new vga_switcheroo "Handlers" chapter. Eventually this should be amended with documentation about the four other handlers that exist so far (nouveau v1 DSM, nouveau Optimus DSM, radeon ATPX, amdgpu ATPX). Requires kernel-doc with asciidoc support. The EFI variable was reverse-engineered by Bruno Bierbaumer <bruno@bierbaumer.net> and Andreas Heider <andreas@meetr.de>. Some of the remaining open questions: * How are vblank intervals synchronized on retinas to achieve seamless switching? Is the DP mux capable of this? It's not mentioned in the data sheets. Or is it done at the OS level, i.e. do we have to synchronize vblank intervals between DRM drivers? There's a signal coming from the panel connector and going into gmux, could this be the vblank signal as received by the panel to properly time the switch? * On retinas there's an I2C bus between gmux and the connector of the right I/O board, apparently leading to the Parade PS8401A HDMI repeater. What is this for, is it controlled via gmux registers? Data sheet: http://www.paradetech.com/products/jitter-cleaning-repeaters/ps8401/ * On retinas there's an I2C bus between gmux and the LED driver. Pre-retinas connected the LED driver to SMBUS. Are there additional gmux registers on retinas to control it? * The MacPro6,1 2013 also has a gmux, the same Renesas R4F2113 as the retina MacBook Pro. The Mac Pro doesn't have a built-in display, so what is its purpose? Power control of the dual FirePro GPUs? Switching of the external DP/Thunderbolt ports? The iFixit teardown clearly shows one TI HD3SS212 DisplayPort mux on the logic board next to one of the three Thunderbolt controllers. However six muxes would be necessary to switch all six ports between GPUs. The mux is probably necessary for one of the display configurations allowed by Apple, but which one? https://www.ifixit.com/Teardown/Mac+Pro+Late+2013+Teardown/20778 https://d3nevzfk7ii3be.cloudfront.net/igi/fELBTnt31QhnDsqq.huge https://support.apple.com/en-us/HT202801 * Registers we haven't decoded yet: 0x700 32 Bit configmap? 0x708 32 Bit power sequence? 0x712 8 Bit status of clock from panel on retinas? 0x713 8 Bit dito? 0x724 16 Bit backlight, raw value? 0x760 32 Bit backlight 0x764 32 Bit backlight 0x768 8 Bit backlight 0x76a 16 Bit backlight 0x76c 16 Bit backlight 0x76e 16 Bit backlight 0x77f edp/dp/hdmi probe? retina only. * Addition by Bruno Prémont <bonbons@linux-vserver.org>: "Missing is also precise knowledge as to what the gmux depends on. From behavioral reports, it is somehow sensitive to VGA IO/MEM routing (it apparently needs the routing to go to integrated GPU, not discrete GPU). When the routing is inappropriate backlight control IO just reads back as 0xFF (and eventually gmux IO in general does so)." Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Darren Hart <dvhart@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/da309e436fbeac886477d80376457b7d83ea4b2d.1452431795.git.lukas@wunner.de Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-11 02:08:35 +03:00
*
* On retinas, muxing is no longer done by gmux itself, but by a separate
* chip which is controlled by gmux. The chip is triple sourced, it is
* either an `NXP CBTL06142`_, `TI HD3SS212`_ or `Pericom PI3VDP12412`_.
apple-gmux: Add initial documentation Document what I've learned so far about the gmux so that we can collaboratively reverse-engineer its remaining unknown bits without everyone having to start from scratch. The DOC sections are bound together in the gpu.tmpl DocBook under a new vga_switcheroo "Handlers" chapter. Eventually this should be amended with documentation about the four other handlers that exist so far (nouveau v1 DSM, nouveau Optimus DSM, radeon ATPX, amdgpu ATPX). Requires kernel-doc with asciidoc support. The EFI variable was reverse-engineered by Bruno Bierbaumer <bruno@bierbaumer.net> and Andreas Heider <andreas@meetr.de>. Some of the remaining open questions: * How are vblank intervals synchronized on retinas to achieve seamless switching? Is the DP mux capable of this? It's not mentioned in the data sheets. Or is it done at the OS level, i.e. do we have to synchronize vblank intervals between DRM drivers? There's a signal coming from the panel connector and going into gmux, could this be the vblank signal as received by the panel to properly time the switch? * On retinas there's an I2C bus between gmux and the connector of the right I/O board, apparently leading to the Parade PS8401A HDMI repeater. What is this for, is it controlled via gmux registers? Data sheet: http://www.paradetech.com/products/jitter-cleaning-repeaters/ps8401/ * On retinas there's an I2C bus between gmux and the LED driver. Pre-retinas connected the LED driver to SMBUS. Are there additional gmux registers on retinas to control it? * The MacPro6,1 2013 also has a gmux, the same Renesas R4F2113 as the retina MacBook Pro. The Mac Pro doesn't have a built-in display, so what is its purpose? Power control of the dual FirePro GPUs? Switching of the external DP/Thunderbolt ports? The iFixit teardown clearly shows one TI HD3SS212 DisplayPort mux on the logic board next to one of the three Thunderbolt controllers. However six muxes would be necessary to switch all six ports between GPUs. The mux is probably necessary for one of the display configurations allowed by Apple, but which one? https://www.ifixit.com/Teardown/Mac+Pro+Late+2013+Teardown/20778 https://d3nevzfk7ii3be.cloudfront.net/igi/fELBTnt31QhnDsqq.huge https://support.apple.com/en-us/HT202801 * Registers we haven't decoded yet: 0x700 32 Bit configmap? 0x708 32 Bit power sequence? 0x712 8 Bit status of clock from panel on retinas? 0x713 8 Bit dito? 0x724 16 Bit backlight, raw value? 0x760 32 Bit backlight 0x764 32 Bit backlight 0x768 8 Bit backlight 0x76a 16 Bit backlight 0x76c 16 Bit backlight 0x76e 16 Bit backlight 0x77f edp/dp/hdmi probe? retina only. * Addition by Bruno Prémont <bonbons@linux-vserver.org>: "Missing is also precise knowledge as to what the gmux depends on. From behavioral reports, it is somehow sensitive to VGA IO/MEM routing (it apparently needs the routing to go to integrated GPU, not discrete GPU). When the routing is inappropriate backlight control IO just reads back as 0xFF (and eventually gmux IO in general does so)." Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Darren Hart <dvhart@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/da309e436fbeac886477d80376457b7d83ea4b2d.1452431795.git.lukas@wunner.de Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-11 02:08:35 +03:00
* The panel is driven with eDP instead of LVDS since the pixel clock
* required for retina resolution exceeds LVDS' limits.
*
* Pre-retinas are able to switch the panel's DDC pins separately.
* This is handled by a `TI SN74LV4066A`_ which is controlled by gmux.
apple-gmux: Add initial documentation Document what I've learned so far about the gmux so that we can collaboratively reverse-engineer its remaining unknown bits without everyone having to start from scratch. The DOC sections are bound together in the gpu.tmpl DocBook under a new vga_switcheroo "Handlers" chapter. Eventually this should be amended with documentation about the four other handlers that exist so far (nouveau v1 DSM, nouveau Optimus DSM, radeon ATPX, amdgpu ATPX). Requires kernel-doc with asciidoc support. The EFI variable was reverse-engineered by Bruno Bierbaumer <bruno@bierbaumer.net> and Andreas Heider <andreas@meetr.de>. Some of the remaining open questions: * How are vblank intervals synchronized on retinas to achieve seamless switching? Is the DP mux capable of this? It's not mentioned in the data sheets. Or is it done at the OS level, i.e. do we have to synchronize vblank intervals between DRM drivers? There's a signal coming from the panel connector and going into gmux, could this be the vblank signal as received by the panel to properly time the switch? * On retinas there's an I2C bus between gmux and the connector of the right I/O board, apparently leading to the Parade PS8401A HDMI repeater. What is this for, is it controlled via gmux registers? Data sheet: http://www.paradetech.com/products/jitter-cleaning-repeaters/ps8401/ * On retinas there's an I2C bus between gmux and the LED driver. Pre-retinas connected the LED driver to SMBUS. Are there additional gmux registers on retinas to control it? * The MacPro6,1 2013 also has a gmux, the same Renesas R4F2113 as the retina MacBook Pro. The Mac Pro doesn't have a built-in display, so what is its purpose? Power control of the dual FirePro GPUs? Switching of the external DP/Thunderbolt ports? The iFixit teardown clearly shows one TI HD3SS212 DisplayPort mux on the logic board next to one of the three Thunderbolt controllers. However six muxes would be necessary to switch all six ports between GPUs. The mux is probably necessary for one of the display configurations allowed by Apple, but which one? https://www.ifixit.com/Teardown/Mac+Pro+Late+2013+Teardown/20778 https://d3nevzfk7ii3be.cloudfront.net/igi/fELBTnt31QhnDsqq.huge https://support.apple.com/en-us/HT202801 * Registers we haven't decoded yet: 0x700 32 Bit configmap? 0x708 32 Bit power sequence? 0x712 8 Bit status of clock from panel on retinas? 0x713 8 Bit dito? 0x724 16 Bit backlight, raw value? 0x760 32 Bit backlight 0x764 32 Bit backlight 0x768 8 Bit backlight 0x76a 16 Bit backlight 0x76c 16 Bit backlight 0x76e 16 Bit backlight 0x77f edp/dp/hdmi probe? retina only. * Addition by Bruno Prémont <bonbons@linux-vserver.org>: "Missing is also precise knowledge as to what the gmux depends on. From behavioral reports, it is somehow sensitive to VGA IO/MEM routing (it apparently needs the routing to go to integrated GPU, not discrete GPU). When the routing is inappropriate backlight control IO just reads back as 0xFF (and eventually gmux IO in general does so)." Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Darren Hart <dvhart@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/da309e436fbeac886477d80376457b7d83ea4b2d.1452431795.git.lukas@wunner.de Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-11 02:08:35 +03:00
* The inactive GPU can thus probe the panel's EDID without switching over
* the entire panel. Retinas lack this functionality as the chips used for
* eDP muxing are incapable of switching the AUX channel separately (see
* the linked data sheets, Pericom would be capable but this is unused).
* However the retina panel has the NO_AUX_HANDSHAKE_LINK_TRAINING bit set
* in its DPCD, allowing the inactive GPU to skip the AUX handshake and
* set up the output with link parameters pre-calibrated by the active GPU.
*
* The external DP port is only fully switchable on the first two unibody
* MacBook Pro generations, MBP5 2008/09 and MBP6 2010. This is done by an
* `NXP CBTL06141`_ which is controlled by gmux. It's the predecessor of the
apple-gmux: Add initial documentation Document what I've learned so far about the gmux so that we can collaboratively reverse-engineer its remaining unknown bits without everyone having to start from scratch. The DOC sections are bound together in the gpu.tmpl DocBook under a new vga_switcheroo "Handlers" chapter. Eventually this should be amended with documentation about the four other handlers that exist so far (nouveau v1 DSM, nouveau Optimus DSM, radeon ATPX, amdgpu ATPX). Requires kernel-doc with asciidoc support. The EFI variable was reverse-engineered by Bruno Bierbaumer <bruno@bierbaumer.net> and Andreas Heider <andreas@meetr.de>. Some of the remaining open questions: * How are vblank intervals synchronized on retinas to achieve seamless switching? Is the DP mux capable of this? It's not mentioned in the data sheets. Or is it done at the OS level, i.e. do we have to synchronize vblank intervals between DRM drivers? There's a signal coming from the panel connector and going into gmux, could this be the vblank signal as received by the panel to properly time the switch? * On retinas there's an I2C bus between gmux and the connector of the right I/O board, apparently leading to the Parade PS8401A HDMI repeater. What is this for, is it controlled via gmux registers? Data sheet: http://www.paradetech.com/products/jitter-cleaning-repeaters/ps8401/ * On retinas there's an I2C bus between gmux and the LED driver. Pre-retinas connected the LED driver to SMBUS. Are there additional gmux registers on retinas to control it? * The MacPro6,1 2013 also has a gmux, the same Renesas R4F2113 as the retina MacBook Pro. The Mac Pro doesn't have a built-in display, so what is its purpose? Power control of the dual FirePro GPUs? Switching of the external DP/Thunderbolt ports? The iFixit teardown clearly shows one TI HD3SS212 DisplayPort mux on the logic board next to one of the three Thunderbolt controllers. However six muxes would be necessary to switch all six ports between GPUs. The mux is probably necessary for one of the display configurations allowed by Apple, but which one? https://www.ifixit.com/Teardown/Mac+Pro+Late+2013+Teardown/20778 https://d3nevzfk7ii3be.cloudfront.net/igi/fELBTnt31QhnDsqq.huge https://support.apple.com/en-us/HT202801 * Registers we haven't decoded yet: 0x700 32 Bit configmap? 0x708 32 Bit power sequence? 0x712 8 Bit status of clock from panel on retinas? 0x713 8 Bit dito? 0x724 16 Bit backlight, raw value? 0x760 32 Bit backlight 0x764 32 Bit backlight 0x768 8 Bit backlight 0x76a 16 Bit backlight 0x76c 16 Bit backlight 0x76e 16 Bit backlight 0x77f edp/dp/hdmi probe? retina only. * Addition by Bruno Prémont <bonbons@linux-vserver.org>: "Missing is also precise knowledge as to what the gmux depends on. From behavioral reports, it is somehow sensitive to VGA IO/MEM routing (it apparently needs the routing to go to integrated GPU, not discrete GPU). When the routing is inappropriate backlight control IO just reads back as 0xFF (and eventually gmux IO in general does so)." Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Darren Hart <dvhart@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/da309e436fbeac886477d80376457b7d83ea4b2d.1452431795.git.lukas@wunner.de Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-11 02:08:35 +03:00
* eDP mux on retinas, the difference being support for 2.7 versus 5.4 Gbit/s.
*
* The following MacBook Pro generations replaced the external DP port with a
* combined DP/Thunderbolt port and lost the ability to switch it between GPUs,
* connecting it either to the discrete GPU or the Thunderbolt controller.
* Oddly enough, while the full port is no longer switchable, AUX and HPD
* are still switchable by way of an `NXP CBTL03062`_ (on pre-retinas
* MBP8 2011 and MBP9 2012) or two `TI TS3DS10224`_ (on retinas) under the
apple-gmux: Add initial documentation Document what I've learned so far about the gmux so that we can collaboratively reverse-engineer its remaining unknown bits without everyone having to start from scratch. The DOC sections are bound together in the gpu.tmpl DocBook under a new vga_switcheroo "Handlers" chapter. Eventually this should be amended with documentation about the four other handlers that exist so far (nouveau v1 DSM, nouveau Optimus DSM, radeon ATPX, amdgpu ATPX). Requires kernel-doc with asciidoc support. The EFI variable was reverse-engineered by Bruno Bierbaumer <bruno@bierbaumer.net> and Andreas Heider <andreas@meetr.de>. Some of the remaining open questions: * How are vblank intervals synchronized on retinas to achieve seamless switching? Is the DP mux capable of this? It's not mentioned in the data sheets. Or is it done at the OS level, i.e. do we have to synchronize vblank intervals between DRM drivers? There's a signal coming from the panel connector and going into gmux, could this be the vblank signal as received by the panel to properly time the switch? * On retinas there's an I2C bus between gmux and the connector of the right I/O board, apparently leading to the Parade PS8401A HDMI repeater. What is this for, is it controlled via gmux registers? Data sheet: http://www.paradetech.com/products/jitter-cleaning-repeaters/ps8401/ * On retinas there's an I2C bus between gmux and the LED driver. Pre-retinas connected the LED driver to SMBUS. Are there additional gmux registers on retinas to control it? * The MacPro6,1 2013 also has a gmux, the same Renesas R4F2113 as the retina MacBook Pro. The Mac Pro doesn't have a built-in display, so what is its purpose? Power control of the dual FirePro GPUs? Switching of the external DP/Thunderbolt ports? The iFixit teardown clearly shows one TI HD3SS212 DisplayPort mux on the logic board next to one of the three Thunderbolt controllers. However six muxes would be necessary to switch all six ports between GPUs. The mux is probably necessary for one of the display configurations allowed by Apple, but which one? https://www.ifixit.com/Teardown/Mac+Pro+Late+2013+Teardown/20778 https://d3nevzfk7ii3be.cloudfront.net/igi/fELBTnt31QhnDsqq.huge https://support.apple.com/en-us/HT202801 * Registers we haven't decoded yet: 0x700 32 Bit configmap? 0x708 32 Bit power sequence? 0x712 8 Bit status of clock from panel on retinas? 0x713 8 Bit dito? 0x724 16 Bit backlight, raw value? 0x760 32 Bit backlight 0x764 32 Bit backlight 0x768 8 Bit backlight 0x76a 16 Bit backlight 0x76c 16 Bit backlight 0x76e 16 Bit backlight 0x77f edp/dp/hdmi probe? retina only. * Addition by Bruno Prémont <bonbons@linux-vserver.org>: "Missing is also precise knowledge as to what the gmux depends on. From behavioral reports, it is somehow sensitive to VGA IO/MEM routing (it apparently needs the routing to go to integrated GPU, not discrete GPU). When the routing is inappropriate backlight control IO just reads back as 0xFF (and eventually gmux IO in general does so)." Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Darren Hart <dvhart@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/da309e436fbeac886477d80376457b7d83ea4b2d.1452431795.git.lukas@wunner.de Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-11 02:08:35 +03:00
* control of gmux. Since the integrated GPU is missing the main link,
* external displays appear to it as phantoms which fail to link-train.
*
* gmux receives the HPD signal of all display connectors and sends an
* interrupt on hotplug. On generations which cannot switch external ports,
* the discrete GPU can then be woken to drive the newly connected display.
* The ability to switch AUX on these generations could be used to improve
* reliability of hotplug detection by having the integrated GPU poll the
* ports while the discrete GPU is asleep, but currently we do not make use
* of this feature.
*
* Our switching policy for the external port is that on those generations
* which are able to switch it fully, the port is switched together with the
* panel when IGD / DIS commands are issued to vga_switcheroo. It is thus
* possible to drive e.g. a beamer on battery power with the integrated GPU.
* The user may manually switch to the discrete GPU if more performance is
* needed.
*
* On all newer generations, the external port can only be driven by the
* discrete GPU. If a display is plugged in while the panel is switched to
* the integrated GPU, *both* GPUs will be in use for maximum performance.
* To decrease power consumption, the user may manually switch to the
* discrete GPU, thereby suspending the integrated GPU.
*
apple-gmux: Add initial documentation Document what I've learned so far about the gmux so that we can collaboratively reverse-engineer its remaining unknown bits without everyone having to start from scratch. The DOC sections are bound together in the gpu.tmpl DocBook under a new vga_switcheroo "Handlers" chapter. Eventually this should be amended with documentation about the four other handlers that exist so far (nouveau v1 DSM, nouveau Optimus DSM, radeon ATPX, amdgpu ATPX). Requires kernel-doc with asciidoc support. The EFI variable was reverse-engineered by Bruno Bierbaumer <bruno@bierbaumer.net> and Andreas Heider <andreas@meetr.de>. Some of the remaining open questions: * How are vblank intervals synchronized on retinas to achieve seamless switching? Is the DP mux capable of this? It's not mentioned in the data sheets. Or is it done at the OS level, i.e. do we have to synchronize vblank intervals between DRM drivers? There's a signal coming from the panel connector and going into gmux, could this be the vblank signal as received by the panel to properly time the switch? * On retinas there's an I2C bus between gmux and the connector of the right I/O board, apparently leading to the Parade PS8401A HDMI repeater. What is this for, is it controlled via gmux registers? Data sheet: http://www.paradetech.com/products/jitter-cleaning-repeaters/ps8401/ * On retinas there's an I2C bus between gmux and the LED driver. Pre-retinas connected the LED driver to SMBUS. Are there additional gmux registers on retinas to control it? * The MacPro6,1 2013 also has a gmux, the same Renesas R4F2113 as the retina MacBook Pro. The Mac Pro doesn't have a built-in display, so what is its purpose? Power control of the dual FirePro GPUs? Switching of the external DP/Thunderbolt ports? The iFixit teardown clearly shows one TI HD3SS212 DisplayPort mux on the logic board next to one of the three Thunderbolt controllers. However six muxes would be necessary to switch all six ports between GPUs. The mux is probably necessary for one of the display configurations allowed by Apple, but which one? https://www.ifixit.com/Teardown/Mac+Pro+Late+2013+Teardown/20778 https://d3nevzfk7ii3be.cloudfront.net/igi/fELBTnt31QhnDsqq.huge https://support.apple.com/en-us/HT202801 * Registers we haven't decoded yet: 0x700 32 Bit configmap? 0x708 32 Bit power sequence? 0x712 8 Bit status of clock from panel on retinas? 0x713 8 Bit dito? 0x724 16 Bit backlight, raw value? 0x760 32 Bit backlight 0x764 32 Bit backlight 0x768 8 Bit backlight 0x76a 16 Bit backlight 0x76c 16 Bit backlight 0x76e 16 Bit backlight 0x77f edp/dp/hdmi probe? retina only. * Addition by Bruno Prémont <bonbons@linux-vserver.org>: "Missing is also precise knowledge as to what the gmux depends on. From behavioral reports, it is somehow sensitive to VGA IO/MEM routing (it apparently needs the routing to go to integrated GPU, not discrete GPU). When the routing is inappropriate backlight control IO just reads back as 0xFF (and eventually gmux IO in general does so)." Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Darren Hart <dvhart@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/da309e436fbeac886477d80376457b7d83ea4b2d.1452431795.git.lukas@wunner.de Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-11 02:08:35 +03:00
* gmux' initial switch state on bootup is user configurable via the EFI
* variable ``gpu-power-prefs-fa4ce28d-b62f-4c99-9cc3-6815686e30f9`` (5th byte,
apple-gmux: Add initial documentation Document what I've learned so far about the gmux so that we can collaboratively reverse-engineer its remaining unknown bits without everyone having to start from scratch. The DOC sections are bound together in the gpu.tmpl DocBook under a new vga_switcheroo "Handlers" chapter. Eventually this should be amended with documentation about the four other handlers that exist so far (nouveau v1 DSM, nouveau Optimus DSM, radeon ATPX, amdgpu ATPX). Requires kernel-doc with asciidoc support. The EFI variable was reverse-engineered by Bruno Bierbaumer <bruno@bierbaumer.net> and Andreas Heider <andreas@meetr.de>. Some of the remaining open questions: * How are vblank intervals synchronized on retinas to achieve seamless switching? Is the DP mux capable of this? It's not mentioned in the data sheets. Or is it done at the OS level, i.e. do we have to synchronize vblank intervals between DRM drivers? There's a signal coming from the panel connector and going into gmux, could this be the vblank signal as received by the panel to properly time the switch? * On retinas there's an I2C bus between gmux and the connector of the right I/O board, apparently leading to the Parade PS8401A HDMI repeater. What is this for, is it controlled via gmux registers? Data sheet: http://www.paradetech.com/products/jitter-cleaning-repeaters/ps8401/ * On retinas there's an I2C bus between gmux and the LED driver. Pre-retinas connected the LED driver to SMBUS. Are there additional gmux registers on retinas to control it? * The MacPro6,1 2013 also has a gmux, the same Renesas R4F2113 as the retina MacBook Pro. The Mac Pro doesn't have a built-in display, so what is its purpose? Power control of the dual FirePro GPUs? Switching of the external DP/Thunderbolt ports? The iFixit teardown clearly shows one TI HD3SS212 DisplayPort mux on the logic board next to one of the three Thunderbolt controllers. However six muxes would be necessary to switch all six ports between GPUs. The mux is probably necessary for one of the display configurations allowed by Apple, but which one? https://www.ifixit.com/Teardown/Mac+Pro+Late+2013+Teardown/20778 https://d3nevzfk7ii3be.cloudfront.net/igi/fELBTnt31QhnDsqq.huge https://support.apple.com/en-us/HT202801 * Registers we haven't decoded yet: 0x700 32 Bit configmap? 0x708 32 Bit power sequence? 0x712 8 Bit status of clock from panel on retinas? 0x713 8 Bit dito? 0x724 16 Bit backlight, raw value? 0x760 32 Bit backlight 0x764 32 Bit backlight 0x768 8 Bit backlight 0x76a 16 Bit backlight 0x76c 16 Bit backlight 0x76e 16 Bit backlight 0x77f edp/dp/hdmi probe? retina only. * Addition by Bruno Prémont <bonbons@linux-vserver.org>: "Missing is also precise knowledge as to what the gmux depends on. From behavioral reports, it is somehow sensitive to VGA IO/MEM routing (it apparently needs the routing to go to integrated GPU, not discrete GPU). When the routing is inappropriate backlight control IO just reads back as 0xFF (and eventually gmux IO in general does so)." Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Darren Hart <dvhart@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/da309e436fbeac886477d80376457b7d83ea4b2d.1452431795.git.lukas@wunner.de Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-11 02:08:35 +03:00
* 1 = IGD, 0 = DIS). Based on this setting, the EFI firmware tells gmux to
* switch the panel and the external DP connector and allocates a framebuffer
* for the selected GPU.
*
* .. _US 8,687,007 B2: https://pimg-fpiw.uspto.gov/fdd/07/870/086/0.pdf
* .. _NXP CBTL06141: https://www.nxp.com/documents/data_sheet/CBTL06141.pdf
* .. _NXP CBTL06142: https://www.nxp.com/documents/data_sheet/CBTL06141.pdf
* .. _TI HD3SS212: https://www.ti.com/lit/ds/symlink/hd3ss212.pdf
* .. _Pericom PI3VDP12412: https://www.pericom.com/assets/Datasheets/PI3VDP12412.pdf
* .. _TI SN74LV4066A: https://www.ti.com/lit/ds/symlink/sn74lv4066a.pdf
* .. _NXP CBTL03062: http://pdf.datasheetarchive.com/indexerfiles/Datasheets-SW16/DSASW00308511.pdf
* .. _TI TS3DS10224: https://www.ti.com/lit/ds/symlink/ts3ds10224.pdf
apple-gmux: Add initial documentation Document what I've learned so far about the gmux so that we can collaboratively reverse-engineer its remaining unknown bits without everyone having to start from scratch. The DOC sections are bound together in the gpu.tmpl DocBook under a new vga_switcheroo "Handlers" chapter. Eventually this should be amended with documentation about the four other handlers that exist so far (nouveau v1 DSM, nouveau Optimus DSM, radeon ATPX, amdgpu ATPX). Requires kernel-doc with asciidoc support. The EFI variable was reverse-engineered by Bruno Bierbaumer <bruno@bierbaumer.net> and Andreas Heider <andreas@meetr.de>. Some of the remaining open questions: * How are vblank intervals synchronized on retinas to achieve seamless switching? Is the DP mux capable of this? It's not mentioned in the data sheets. Or is it done at the OS level, i.e. do we have to synchronize vblank intervals between DRM drivers? There's a signal coming from the panel connector and going into gmux, could this be the vblank signal as received by the panel to properly time the switch? * On retinas there's an I2C bus between gmux and the connector of the right I/O board, apparently leading to the Parade PS8401A HDMI repeater. What is this for, is it controlled via gmux registers? Data sheet: http://www.paradetech.com/products/jitter-cleaning-repeaters/ps8401/ * On retinas there's an I2C bus between gmux and the LED driver. Pre-retinas connected the LED driver to SMBUS. Are there additional gmux registers on retinas to control it? * The MacPro6,1 2013 also has a gmux, the same Renesas R4F2113 as the retina MacBook Pro. The Mac Pro doesn't have a built-in display, so what is its purpose? Power control of the dual FirePro GPUs? Switching of the external DP/Thunderbolt ports? The iFixit teardown clearly shows one TI HD3SS212 DisplayPort mux on the logic board next to one of the three Thunderbolt controllers. However six muxes would be necessary to switch all six ports between GPUs. The mux is probably necessary for one of the display configurations allowed by Apple, but which one? https://www.ifixit.com/Teardown/Mac+Pro+Late+2013+Teardown/20778 https://d3nevzfk7ii3be.cloudfront.net/igi/fELBTnt31QhnDsqq.huge https://support.apple.com/en-us/HT202801 * Registers we haven't decoded yet: 0x700 32 Bit configmap? 0x708 32 Bit power sequence? 0x712 8 Bit status of clock from panel on retinas? 0x713 8 Bit dito? 0x724 16 Bit backlight, raw value? 0x760 32 Bit backlight 0x764 32 Bit backlight 0x768 8 Bit backlight 0x76a 16 Bit backlight 0x76c 16 Bit backlight 0x76e 16 Bit backlight 0x77f edp/dp/hdmi probe? retina only. * Addition by Bruno Prémont <bonbons@linux-vserver.org>: "Missing is also precise knowledge as to what the gmux depends on. From behavioral reports, it is somehow sensitive to VGA IO/MEM routing (it apparently needs the routing to go to integrated GPU, not discrete GPU). When the routing is inappropriate backlight control IO just reads back as 0xFF (and eventually gmux IO in general does so)." Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Darren Hart <dvhart@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/da309e436fbeac886477d80376457b7d83ea4b2d.1452431795.git.lukas@wunner.de Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-11 02:08:35 +03:00
*/
apple-gmux: Track switch state gmux has 3 switch registers: * GMUX_PORT_SWITCH_DISPLAY switches the panel * GMUX_PORT_SWITCH_DDC switches the panel's DDC lines (only on pre-retinas; on retinas this is a no-op) * GMUX_PORT_SWITCH_EXTERNAL switches the external DP port(s) (only on models without Thunderbolt, i.e. introduced before 2011; those with Thunderbolt switch only HPD/AUX, not the main link) Currently we switch all 3 registers in unison. gmux does not preserve the switch state during suspend, so we currently read GMUX_PORT_SWITCH_DISPLAY before suspend and restore all 3 registers to this value on resume. With the upcoming ->switch_ddc callback, GMUX_PORT_SWITCH_DDC may temporarily contain a different value than the other 2 registers. If we happen to suspend at this moment, we'll write an incorrect value to GMUX_PORT_SWITCH_DDC on resume. Also, on models with Thunderbolt the integrated GPU is unable to drive the external DP port(s), so we want to keep GMUX_PORT_SWITCH_EXTERNAL permanently switched to the discrete GPU on those machines. Consequently we can no longer assume that GMUX_PORT_SWITCH_DISPLAY represents the correct value for all 3 registers on suspend. Track the state of all 3 registers: Add gmux_read_switch_state() and gmux_write_switch_state(). Instead of reading the switch state on every suspend, read it once on driver initialization so that we know the current switch state all the time. (This allows us to use some optimizations and shortcuts, e.g. we can skip switching DDC if we know that it's already switched to the requested GPU.) Change the ->switchto callback to use gmux_write_switch_state(). Tested-by: Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/5679f414cb0ddf1654dcc359571f3764b275edf0.1452525860.git.lukas@wunner.de
2016-01-11 22:09:20 +03:00
static void gmux_read_switch_state(struct apple_gmux_data *gmux_data)
{
if (gmux_read8(gmux_data, GMUX_PORT_SWITCH_DDC) == 1)
gmux_data->switch_state_ddc = VGA_SWITCHEROO_IGD;
else
gmux_data->switch_state_ddc = VGA_SWITCHEROO_DIS;
if (gmux_read8(gmux_data, GMUX_PORT_SWITCH_DISPLAY) == 2)
gmux_data->switch_state_display = VGA_SWITCHEROO_IGD;
else
gmux_data->switch_state_display = VGA_SWITCHEROO_DIS;
if (gmux_read8(gmux_data, GMUX_PORT_SWITCH_EXTERNAL) == 2)
gmux_data->switch_state_external = VGA_SWITCHEROO_IGD;
else
gmux_data->switch_state_external = VGA_SWITCHEROO_DIS;
}
static void gmux_write_switch_state(struct apple_gmux_data *gmux_data)
{
if (gmux_data->switch_state_ddc == VGA_SWITCHEROO_IGD)
gmux_write8(gmux_data, GMUX_PORT_SWITCH_DDC, 1);
else
gmux_write8(gmux_data, GMUX_PORT_SWITCH_DDC, 2);
if (gmux_data->switch_state_display == VGA_SWITCHEROO_IGD)
gmux_write8(gmux_data, GMUX_PORT_SWITCH_DISPLAY, 2);
else
gmux_write8(gmux_data, GMUX_PORT_SWITCH_DISPLAY, 3);
if (gmux_data->switch_state_external == VGA_SWITCHEROO_IGD)
gmux_write8(gmux_data, GMUX_PORT_SWITCH_EXTERNAL, 2);
else
gmux_write8(gmux_data, GMUX_PORT_SWITCH_EXTERNAL, 3);
}
static int gmux_switchto(enum vga_switcheroo_client_id id)
{
apple-gmux: Track switch state gmux has 3 switch registers: * GMUX_PORT_SWITCH_DISPLAY switches the panel * GMUX_PORT_SWITCH_DDC switches the panel's DDC lines (only on pre-retinas; on retinas this is a no-op) * GMUX_PORT_SWITCH_EXTERNAL switches the external DP port(s) (only on models without Thunderbolt, i.e. introduced before 2011; those with Thunderbolt switch only HPD/AUX, not the main link) Currently we switch all 3 registers in unison. gmux does not preserve the switch state during suspend, so we currently read GMUX_PORT_SWITCH_DISPLAY before suspend and restore all 3 registers to this value on resume. With the upcoming ->switch_ddc callback, GMUX_PORT_SWITCH_DDC may temporarily contain a different value than the other 2 registers. If we happen to suspend at this moment, we'll write an incorrect value to GMUX_PORT_SWITCH_DDC on resume. Also, on models with Thunderbolt the integrated GPU is unable to drive the external DP port(s), so we want to keep GMUX_PORT_SWITCH_EXTERNAL permanently switched to the discrete GPU on those machines. Consequently we can no longer assume that GMUX_PORT_SWITCH_DISPLAY represents the correct value for all 3 registers on suspend. Track the state of all 3 registers: Add gmux_read_switch_state() and gmux_write_switch_state(). Instead of reading the switch state on every suspend, read it once on driver initialization so that we know the current switch state all the time. (This allows us to use some optimizations and shortcuts, e.g. we can skip switching DDC if we know that it's already switched to the requested GPU.) Change the ->switchto callback to use gmux_write_switch_state(). Tested-by: Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/5679f414cb0ddf1654dcc359571f3764b275edf0.1452525860.git.lukas@wunner.de
2016-01-11 22:09:20 +03:00
apple_gmux_data->switch_state_ddc = id;
apple_gmux_data->switch_state_display = id;
if (apple_gmux_data->external_switchable)
apple_gmux_data->switch_state_external = id;
apple-gmux: Track switch state gmux has 3 switch registers: * GMUX_PORT_SWITCH_DISPLAY switches the panel * GMUX_PORT_SWITCH_DDC switches the panel's DDC lines (only on pre-retinas; on retinas this is a no-op) * GMUX_PORT_SWITCH_EXTERNAL switches the external DP port(s) (only on models without Thunderbolt, i.e. introduced before 2011; those with Thunderbolt switch only HPD/AUX, not the main link) Currently we switch all 3 registers in unison. gmux does not preserve the switch state during suspend, so we currently read GMUX_PORT_SWITCH_DISPLAY before suspend and restore all 3 registers to this value on resume. With the upcoming ->switch_ddc callback, GMUX_PORT_SWITCH_DDC may temporarily contain a different value than the other 2 registers. If we happen to suspend at this moment, we'll write an incorrect value to GMUX_PORT_SWITCH_DDC on resume. Also, on models with Thunderbolt the integrated GPU is unable to drive the external DP port(s), so we want to keep GMUX_PORT_SWITCH_EXTERNAL permanently switched to the discrete GPU on those machines. Consequently we can no longer assume that GMUX_PORT_SWITCH_DISPLAY represents the correct value for all 3 registers on suspend. Track the state of all 3 registers: Add gmux_read_switch_state() and gmux_write_switch_state(). Instead of reading the switch state on every suspend, read it once on driver initialization so that we know the current switch state all the time. (This allows us to use some optimizations and shortcuts, e.g. we can skip switching DDC if we know that it's already switched to the requested GPU.) Change the ->switchto callback to use gmux_write_switch_state(). Tested-by: Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/5679f414cb0ddf1654dcc359571f3764b275edf0.1452525860.git.lukas@wunner.de
2016-01-11 22:09:20 +03:00
gmux_write_switch_state(apple_gmux_data);
return 0;
}
apple-gmux: Add switch_ddc support Originally by Seth Forshee <seth.forshee@canonical.com>, 2012-10-04: The gmux allows muxing the DDC independently from the display, so support this functionality. This will allow reading the EDID for the inactive GPU, fixing issues with machines that either don't have a VBT or have invalid mode data in the VBT. Modified by Lukas Wunner <lukas@wunner.de>, 2015-04 - 2015-12: Change semantics of ->switch_ddc handler callback to return previous DDC owner. Original version tried to determine previous DDC owner with find_active_client() in vga_switcheroo but this fails if the inactive client registers before the active client. v2.4: Retain semantics of ->switchto handler callback to switch all pins, including DDC (Daniel Vetter) v4: Advertise ->switch_ddc handler callback only on the pre-retina Macbook Pro. The retina uses eDP instead of LVDS and gmux no longer does the muxing itself but merely controls an external mux. That mux is incapable of switching the AUX channel separately from the main link. It's an NXP CBTL06142 (alternate parts: TI HD3SS212, Pericom PI3VDP12412, see datasheets below). v5: Rebase on "apple-gmux: Track switch state". Rebase on "vga_switcheroo: Add handler flags infrastructure". Rebase on 5d170139eb10 ("Constify vga_switcheroo_handler"), requires 2 structs, 1x with ->switchto for pre-retinas, 1x without for retinas). Add error message if handler registration with vga_switcheroo fails. Teardowns identifying the mux: http://www.electronicproducts.com/-whatsinside_text-145.aspx http://slideshare.net/jjwu6266/apple-2012-wwdc-apple-macbook-pro-with-retina-display http://www.techrepublic.com/blog/cracking-open/teardown-shows-retina-macbook-pro-is-nearly-impossible-to-upgrade-difficult-to-work-on/ Mux Datasheets: http://www.nxp.com/documents/data_sheet/CBTL06141.pdf http://www.ti.com/lit/ds/symlink/hd3ss212.pdf https://www.pericom.com/assets/Datasheets/PI3VDP12412.pdf Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115 Tested-by: Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Cc: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/17fe8bfb0415d713bb4174f84ac9aae5d7d9a5f8.1452525860.git.lukas@wunner.de
2016-01-11 22:09:20 +03:00
static int gmux_switch_ddc(enum vga_switcheroo_client_id id)
{
enum vga_switcheroo_client_id old_ddc_owner =
apple_gmux_data->switch_state_ddc;
if (id == old_ddc_owner)
return id;
pr_debug("Switching DDC from %d to %d\n", old_ddc_owner, id);
apple_gmux_data->switch_state_ddc = id;
if (id == VGA_SWITCHEROO_IGD)
gmux_write8(apple_gmux_data, GMUX_PORT_SWITCH_DDC, 1);
else
gmux_write8(apple_gmux_data, GMUX_PORT_SWITCH_DDC, 2);
return old_ddc_owner;
}
apple-gmux: Add initial documentation Document what I've learned so far about the gmux so that we can collaboratively reverse-engineer its remaining unknown bits without everyone having to start from scratch. The DOC sections are bound together in the gpu.tmpl DocBook under a new vga_switcheroo "Handlers" chapter. Eventually this should be amended with documentation about the four other handlers that exist so far (nouveau v1 DSM, nouveau Optimus DSM, radeon ATPX, amdgpu ATPX). Requires kernel-doc with asciidoc support. The EFI variable was reverse-engineered by Bruno Bierbaumer <bruno@bierbaumer.net> and Andreas Heider <andreas@meetr.de>. Some of the remaining open questions: * How are vblank intervals synchronized on retinas to achieve seamless switching? Is the DP mux capable of this? It's not mentioned in the data sheets. Or is it done at the OS level, i.e. do we have to synchronize vblank intervals between DRM drivers? There's a signal coming from the panel connector and going into gmux, could this be the vblank signal as received by the panel to properly time the switch? * On retinas there's an I2C bus between gmux and the connector of the right I/O board, apparently leading to the Parade PS8401A HDMI repeater. What is this for, is it controlled via gmux registers? Data sheet: http://www.paradetech.com/products/jitter-cleaning-repeaters/ps8401/ * On retinas there's an I2C bus between gmux and the LED driver. Pre-retinas connected the LED driver to SMBUS. Are there additional gmux registers on retinas to control it? * The MacPro6,1 2013 also has a gmux, the same Renesas R4F2113 as the retina MacBook Pro. The Mac Pro doesn't have a built-in display, so what is its purpose? Power control of the dual FirePro GPUs? Switching of the external DP/Thunderbolt ports? The iFixit teardown clearly shows one TI HD3SS212 DisplayPort mux on the logic board next to one of the three Thunderbolt controllers. However six muxes would be necessary to switch all six ports between GPUs. The mux is probably necessary for one of the display configurations allowed by Apple, but which one? https://www.ifixit.com/Teardown/Mac+Pro+Late+2013+Teardown/20778 https://d3nevzfk7ii3be.cloudfront.net/igi/fELBTnt31QhnDsqq.huge https://support.apple.com/en-us/HT202801 * Registers we haven't decoded yet: 0x700 32 Bit configmap? 0x708 32 Bit power sequence? 0x712 8 Bit status of clock from panel on retinas? 0x713 8 Bit dito? 0x724 16 Bit backlight, raw value? 0x760 32 Bit backlight 0x764 32 Bit backlight 0x768 8 Bit backlight 0x76a 16 Bit backlight 0x76c 16 Bit backlight 0x76e 16 Bit backlight 0x77f edp/dp/hdmi probe? retina only. * Addition by Bruno Prémont <bonbons@linux-vserver.org>: "Missing is also precise knowledge as to what the gmux depends on. From behavioral reports, it is somehow sensitive to VGA IO/MEM routing (it apparently needs the routing to go to integrated GPU, not discrete GPU). When the routing is inappropriate backlight control IO just reads back as 0xFF (and eventually gmux IO in general does so)." Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Darren Hart <dvhart@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/da309e436fbeac886477d80376457b7d83ea4b2d.1452431795.git.lukas@wunner.de Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-11 02:08:35 +03:00
/**
* DOC: Power control
*
* gmux is able to cut power to the discrete GPU. It automatically takes care
* of the correct sequence to tear down and bring up the power rails for
* core voltage, VRAM and PCIe.
*/
static int gmux_set_discrete_state(struct apple_gmux_data *gmux_data,
enum vga_switcheroo_state state)
{
reinit_completion(&gmux_data->powerchange_done);
if (state == VGA_SWITCHEROO_ON) {
gmux_write8(gmux_data, GMUX_PORT_DISCRETE_POWER, 1);
gmux_write8(gmux_data, GMUX_PORT_DISCRETE_POWER, 3);
pr_debug("Discrete card powered up\n");
} else {
gmux_write8(gmux_data, GMUX_PORT_DISCRETE_POWER, 1);
gmux_write8(gmux_data, GMUX_PORT_DISCRETE_POWER, 0);
pr_debug("Discrete card powered down\n");
}
gmux_data->power_state = state;
if (gmux_data->gpe >= 0 &&
!wait_for_completion_interruptible_timeout(&gmux_data->powerchange_done,
msecs_to_jiffies(200)))
pr_warn("Timeout waiting for gmux switch to complete\n");
return 0;
}
static int gmux_set_power_state(enum vga_switcheroo_client_id id,
enum vga_switcheroo_state state)
{
if (id == VGA_SWITCHEROO_IGD)
return 0;
return gmux_set_discrete_state(apple_gmux_data, state);
}
static enum vga_switcheroo_client_id gmux_get_client_id(struct pci_dev *pdev)
{
/*
* Early Macbook Pros with switchable graphics use nvidia
* integrated graphics. Hardcode that the 9400M is integrated.
*/
if (pdev->vendor == PCI_VENDOR_ID_INTEL)
return VGA_SWITCHEROO_IGD;
else if (pdev->vendor == PCI_VENDOR_ID_NVIDIA &&
pdev->device == 0x0863)
return VGA_SWITCHEROO_IGD;
else
return VGA_SWITCHEROO_DIS;
}
apple-gmux: Add switch_ddc support Originally by Seth Forshee <seth.forshee@canonical.com>, 2012-10-04: The gmux allows muxing the DDC independently from the display, so support this functionality. This will allow reading the EDID for the inactive GPU, fixing issues with machines that either don't have a VBT or have invalid mode data in the VBT. Modified by Lukas Wunner <lukas@wunner.de>, 2015-04 - 2015-12: Change semantics of ->switch_ddc handler callback to return previous DDC owner. Original version tried to determine previous DDC owner with find_active_client() in vga_switcheroo but this fails if the inactive client registers before the active client. v2.4: Retain semantics of ->switchto handler callback to switch all pins, including DDC (Daniel Vetter) v4: Advertise ->switch_ddc handler callback only on the pre-retina Macbook Pro. The retina uses eDP instead of LVDS and gmux no longer does the muxing itself but merely controls an external mux. That mux is incapable of switching the AUX channel separately from the main link. It's an NXP CBTL06142 (alternate parts: TI HD3SS212, Pericom PI3VDP12412, see datasheets below). v5: Rebase on "apple-gmux: Track switch state". Rebase on "vga_switcheroo: Add handler flags infrastructure". Rebase on 5d170139eb10 ("Constify vga_switcheroo_handler"), requires 2 structs, 1x with ->switchto for pre-retinas, 1x without for retinas). Add error message if handler registration with vga_switcheroo fails. Teardowns identifying the mux: http://www.electronicproducts.com/-whatsinside_text-145.aspx http://slideshare.net/jjwu6266/apple-2012-wwdc-apple-macbook-pro-with-retina-display http://www.techrepublic.com/blog/cracking-open/teardown-shows-retina-macbook-pro-is-nearly-impossible-to-upgrade-difficult-to-work-on/ Mux Datasheets: http://www.nxp.com/documents/data_sheet/CBTL06141.pdf http://www.ti.com/lit/ds/symlink/hd3ss212.pdf https://www.pericom.com/assets/Datasheets/PI3VDP12412.pdf Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115 Tested-by: Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Cc: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/17fe8bfb0415d713bb4174f84ac9aae5d7d9a5f8.1452525860.git.lukas@wunner.de
2016-01-11 22:09:20 +03:00
static const struct vga_switcheroo_handler gmux_handler_indexed = {
.switchto = gmux_switchto,
.power_state = gmux_set_power_state,
.get_client_id = gmux_get_client_id,
};
apple-gmux: Add switch_ddc support Originally by Seth Forshee <seth.forshee@canonical.com>, 2012-10-04: The gmux allows muxing the DDC independently from the display, so support this functionality. This will allow reading the EDID for the inactive GPU, fixing issues with machines that either don't have a VBT or have invalid mode data in the VBT. Modified by Lukas Wunner <lukas@wunner.de>, 2015-04 - 2015-12: Change semantics of ->switch_ddc handler callback to return previous DDC owner. Original version tried to determine previous DDC owner with find_active_client() in vga_switcheroo but this fails if the inactive client registers before the active client. v2.4: Retain semantics of ->switchto handler callback to switch all pins, including DDC (Daniel Vetter) v4: Advertise ->switch_ddc handler callback only on the pre-retina Macbook Pro. The retina uses eDP instead of LVDS and gmux no longer does the muxing itself but merely controls an external mux. That mux is incapable of switching the AUX channel separately from the main link. It's an NXP CBTL06142 (alternate parts: TI HD3SS212, Pericom PI3VDP12412, see datasheets below). v5: Rebase on "apple-gmux: Track switch state". Rebase on "vga_switcheroo: Add handler flags infrastructure". Rebase on 5d170139eb10 ("Constify vga_switcheroo_handler"), requires 2 structs, 1x with ->switchto for pre-retinas, 1x without for retinas). Add error message if handler registration with vga_switcheroo fails. Teardowns identifying the mux: http://www.electronicproducts.com/-whatsinside_text-145.aspx http://slideshare.net/jjwu6266/apple-2012-wwdc-apple-macbook-pro-with-retina-display http://www.techrepublic.com/blog/cracking-open/teardown-shows-retina-macbook-pro-is-nearly-impossible-to-upgrade-difficult-to-work-on/ Mux Datasheets: http://www.nxp.com/documents/data_sheet/CBTL06141.pdf http://www.ti.com/lit/ds/symlink/hd3ss212.pdf https://www.pericom.com/assets/Datasheets/PI3VDP12412.pdf Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115 Tested-by: Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Cc: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/17fe8bfb0415d713bb4174f84ac9aae5d7d9a5f8.1452525860.git.lukas@wunner.de
2016-01-11 22:09:20 +03:00
static const struct vga_switcheroo_handler gmux_handler_classic = {
.switchto = gmux_switchto,
.switch_ddc = gmux_switch_ddc,
.power_state = gmux_set_power_state,
.get_client_id = gmux_get_client_id,
};
apple-gmux: Add initial documentation Document what I've learned so far about the gmux so that we can collaboratively reverse-engineer its remaining unknown bits without everyone having to start from scratch. The DOC sections are bound together in the gpu.tmpl DocBook under a new vga_switcheroo "Handlers" chapter. Eventually this should be amended with documentation about the four other handlers that exist so far (nouveau v1 DSM, nouveau Optimus DSM, radeon ATPX, amdgpu ATPX). Requires kernel-doc with asciidoc support. The EFI variable was reverse-engineered by Bruno Bierbaumer <bruno@bierbaumer.net> and Andreas Heider <andreas@meetr.de>. Some of the remaining open questions: * How are vblank intervals synchronized on retinas to achieve seamless switching? Is the DP mux capable of this? It's not mentioned in the data sheets. Or is it done at the OS level, i.e. do we have to synchronize vblank intervals between DRM drivers? There's a signal coming from the panel connector and going into gmux, could this be the vblank signal as received by the panel to properly time the switch? * On retinas there's an I2C bus between gmux and the connector of the right I/O board, apparently leading to the Parade PS8401A HDMI repeater. What is this for, is it controlled via gmux registers? Data sheet: http://www.paradetech.com/products/jitter-cleaning-repeaters/ps8401/ * On retinas there's an I2C bus between gmux and the LED driver. Pre-retinas connected the LED driver to SMBUS. Are there additional gmux registers on retinas to control it? * The MacPro6,1 2013 also has a gmux, the same Renesas R4F2113 as the retina MacBook Pro. The Mac Pro doesn't have a built-in display, so what is its purpose? Power control of the dual FirePro GPUs? Switching of the external DP/Thunderbolt ports? The iFixit teardown clearly shows one TI HD3SS212 DisplayPort mux on the logic board next to one of the three Thunderbolt controllers. However six muxes would be necessary to switch all six ports between GPUs. The mux is probably necessary for one of the display configurations allowed by Apple, but which one? https://www.ifixit.com/Teardown/Mac+Pro+Late+2013+Teardown/20778 https://d3nevzfk7ii3be.cloudfront.net/igi/fELBTnt31QhnDsqq.huge https://support.apple.com/en-us/HT202801 * Registers we haven't decoded yet: 0x700 32 Bit configmap? 0x708 32 Bit power sequence? 0x712 8 Bit status of clock from panel on retinas? 0x713 8 Bit dito? 0x724 16 Bit backlight, raw value? 0x760 32 Bit backlight 0x764 32 Bit backlight 0x768 8 Bit backlight 0x76a 16 Bit backlight 0x76c 16 Bit backlight 0x76e 16 Bit backlight 0x77f edp/dp/hdmi probe? retina only. * Addition by Bruno Prémont <bonbons@linux-vserver.org>: "Missing is also precise knowledge as to what the gmux depends on. From behavioral reports, it is somehow sensitive to VGA IO/MEM routing (it apparently needs the routing to go to integrated GPU, not discrete GPU). When the routing is inappropriate backlight control IO just reads back as 0xFF (and eventually gmux IO in general does so)." Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Darren Hart <dvhart@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/da309e436fbeac886477d80376457b7d83ea4b2d.1452431795.git.lukas@wunner.de Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-01-11 02:08:35 +03:00
/**
* DOC: Interrupt
*
* gmux is also connected to a GPIO pin of the southbridge and thereby is able
* to trigger an ACPI GPE. On the MBP5 2008/09 it's GPIO pin 22 of the Nvidia
* MCP79, on all following generations it's GPIO pin 6 of the Intel PCH.
* The GPE merely signals that an interrupt occurred, the actual type of event
* is identified by reading a gmux register.
*/
static inline void gmux_disable_interrupts(struct apple_gmux_data *gmux_data)
{
gmux_write8(gmux_data, GMUX_PORT_INTERRUPT_ENABLE,
GMUX_INTERRUPT_DISABLE);
}
static inline void gmux_enable_interrupts(struct apple_gmux_data *gmux_data)
{
gmux_write8(gmux_data, GMUX_PORT_INTERRUPT_ENABLE,
GMUX_INTERRUPT_ENABLE);
}
static inline u8 gmux_interrupt_get_status(struct apple_gmux_data *gmux_data)
{
return gmux_read8(gmux_data, GMUX_PORT_INTERRUPT_STATUS);
}
static void gmux_clear_interrupts(struct apple_gmux_data *gmux_data)
{
u8 status;
/* to clear interrupts write back current status */
status = gmux_interrupt_get_status(gmux_data);
gmux_write8(gmux_data, GMUX_PORT_INTERRUPT_STATUS, status);
}
static void gmux_notify_handler(acpi_handle device, u32 value, void *context)
{
u8 status;
struct pnp_dev *pnp = (struct pnp_dev *)context;
struct apple_gmux_data *gmux_data = pnp_get_drvdata(pnp);
status = gmux_interrupt_get_status(gmux_data);
gmux_disable_interrupts(gmux_data);
pr_debug("Notify handler called: status %d\n", status);
gmux_clear_interrupts(gmux_data);
gmux_enable_interrupts(gmux_data);
if (status & GMUX_INTERRUPT_STATUS_POWER)
complete(&gmux_data->powerchange_done);
}
static int gmux_suspend(struct device *dev)
{
struct pnp_dev *pnp = to_pnp_dev(dev);
struct apple_gmux_data *gmux_data = pnp_get_drvdata(pnp);
gmux_disable_interrupts(gmux_data);
return 0;
}
static int gmux_resume(struct device *dev)
{
struct pnp_dev *pnp = to_pnp_dev(dev);
struct apple_gmux_data *gmux_data = pnp_get_drvdata(pnp);
gmux_enable_interrupts(gmux_data);
apple-gmux: Track switch state gmux has 3 switch registers: * GMUX_PORT_SWITCH_DISPLAY switches the panel * GMUX_PORT_SWITCH_DDC switches the panel's DDC lines (only on pre-retinas; on retinas this is a no-op) * GMUX_PORT_SWITCH_EXTERNAL switches the external DP port(s) (only on models without Thunderbolt, i.e. introduced before 2011; those with Thunderbolt switch only HPD/AUX, not the main link) Currently we switch all 3 registers in unison. gmux does not preserve the switch state during suspend, so we currently read GMUX_PORT_SWITCH_DISPLAY before suspend and restore all 3 registers to this value on resume. With the upcoming ->switch_ddc callback, GMUX_PORT_SWITCH_DDC may temporarily contain a different value than the other 2 registers. If we happen to suspend at this moment, we'll write an incorrect value to GMUX_PORT_SWITCH_DDC on resume. Also, on models with Thunderbolt the integrated GPU is unable to drive the external DP port(s), so we want to keep GMUX_PORT_SWITCH_EXTERNAL permanently switched to the discrete GPU on those machines. Consequently we can no longer assume that GMUX_PORT_SWITCH_DISPLAY represents the correct value for all 3 registers on suspend. Track the state of all 3 registers: Add gmux_read_switch_state() and gmux_write_switch_state(). Instead of reading the switch state on every suspend, read it once on driver initialization so that we know the current switch state all the time. (This allows us to use some optimizations and shortcuts, e.g. we can skip switching DDC if we know that it's already switched to the requested GPU.) Change the ->switchto callback to use gmux_write_switch_state(). Tested-by: Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/5679f414cb0ddf1654dcc359571f3764b275edf0.1452525860.git.lukas@wunner.de
2016-01-11 22:09:20 +03:00
gmux_write_switch_state(gmux_data);
if (gmux_data->power_state == VGA_SWITCHEROO_OFF)
gmux_set_discrete_state(gmux_data, gmux_data->power_state);
return 0;
}
static int is_thunderbolt(struct device *dev, void *data)
{
return to_pci_dev(dev)->is_thunderbolt;
}
static int gmux_probe(struct pnp_dev *pnp, const struct pnp_device_id *id)
{
struct apple_gmux_data *gmux_data;
struct resource *res;
struct backlight_properties props;
struct backlight_device *bdev;
u8 ver_major, ver_minor, ver_release;
int ret = -ENXIO;
acpi_status status;
unsigned long long gpe;
if (apple_gmux_data)
return -EBUSY;
gmux_data = kzalloc(sizeof(*gmux_data), GFP_KERNEL);
if (!gmux_data)
return -ENOMEM;
pnp_set_drvdata(pnp, gmux_data);
res = pnp_get_resource(pnp, IORESOURCE_IO, 0);
if (!res) {
pr_err("Failed to find gmux I/O resource\n");
goto err_free;
}
gmux_data->iostart = res->start;
gmux_data->iolen = res->end - res->start;
if (gmux_data->iolen < GMUX_MIN_IO_LEN) {
pr_err("gmux I/O region too small (%lu < %u)\n",
gmux_data->iolen, GMUX_MIN_IO_LEN);
goto err_free;
}
if (!request_region(gmux_data->iostart, gmux_data->iolen,
"Apple gmux")) {
pr_err("gmux I/O already in use\n");
goto err_free;
}
/*
* Invalid version information may indicate either that the gmux
* device isn't present or that it's a new one that uses indexed
* io
*/
ver_major = gmux_read8(gmux_data, GMUX_PORT_VERSION_MAJOR);
ver_minor = gmux_read8(gmux_data, GMUX_PORT_VERSION_MINOR);
ver_release = gmux_read8(gmux_data, GMUX_PORT_VERSION_RELEASE);
if (ver_major == 0xff && ver_minor == 0xff && ver_release == 0xff) {
if (gmux_is_indexed(gmux_data)) {
u32 version;
mutex_init(&gmux_data->index_lock);
gmux_data->indexed = true;
version = gmux_read32(gmux_data,
GMUX_PORT_VERSION_MAJOR);
ver_major = (version >> 24) & 0xff;
ver_minor = (version >> 16) & 0xff;
ver_release = (version >> 8) & 0xff;
} else {
Revert "apple-gmux: lock iGP IO to protect from vgaarb changes" Commit 4eebd5a4e726 ("apple-gmux: lock iGP IO to protect from vgaarb changes") amended this driver's ->probe hook to lock decoding of normal (non-legacy) I/O space accesses to the integrated GPU on dual-GPU MacBook Pros. The lock stays in place until the driver is unbound. The change was made to work around an issue with the out-of-tree nvidia graphics driver (available at http://www.nvidia.com/object/unix.html). It contains the following sequence in nvidia/nv.c: #if defined(CONFIG_VGA_ARB) && !defined(NVCPU_PPC64LE) #if defined(VGA_DEFAULT_DEVICE) vga_tryget(VGA_DEFAULT_DEVICE, VGA_RSRC_LEGACY_MASK); #endif vga_set_legacy_decoding(dev, VGA_RSRC_NONE); #endif This code was reported to cause deadlocks with VFIO already in 2013: https://devtalk.nvidia.com/default/topic/545560 I've reported the issue to Nvidia developers once more in 2017: https://www.spinics.net/lists/dri-devel/msg138754.html On the MacBookPro10,1, this code apparently breaks backlight control (which is handled by apple-gmux via an I/O region starting at 0x700), as reported by Petri Hodju: https://bugzilla.kernel.org/show_bug.cgi?id=86121 I tried to replicate Petri's observations on my MacBook9,1, which uses the same Intel Ivy Bridge + Nvidia GeForce GT 650M architecture, to no avail. On my machine apple-gmux' I/O region remains accessible even with the nvidia driver loaded and commit 4eebd5a4e726 reverted. Petri reported that apple-gmux becomes accessible again after a suspend/resume cycle because the BIOS changed the VGA routing on the root port to the Nvidia GPU. Perhaps this is a BIOS issue after all that can be fixed with an update? In any case, the change made by commit 4eebd5a4e726 has turned out to cause two new issues: * Wilfried Klaebe reports a deadlock when launching Xorg because it opens /dev/vga_arbiter and calls vga_get(), but apple-gmux is holding a lock on I/O space indefinitely. It looks like apple-gmux' current behavior is an abuse of the vgaarb API as locks are not meant to be held for longer periods: https://bugzilla.kernel.org/show_bug.cgi?id=88861#c11 https://bugzilla.kernel.org/attachment.cgi?id=217541 * On dual GPU MacBook Pros introduced since 2013, the integrated GPU is powergated on boot und thus becomes invisible to Linux unless a custom EFI protocol is used to leave it powered on. (A patch exists but is not in mainline yet due to several negative side effects.) On these machines, locking I/O to the integrated GPU (as done by 4eebd5a4e726) fails and backlight control is therefore broken: https://bugzilla.kernel.org/show_bug.cgi?id=105051 So let's revert commit 4eebd5a4e726 please. Users experiencing the issue with the proprietary nvidia driver can comment out the above- quoted problematic code as a workaround (or try updating the BIOS). Cc: Petri Hodju <petrihodju@yahoo.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Bruno Prémont <bonbons@linux-vserver.org> Cc: Andy Ritger <aritger@nvidia.com> Cc: Ronald Tschalär <ronald@innovation.ch> Tested-by: Wilfried Klaebe <linux-kernel@lebenslange-mailadresse.de> Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
2018-01-24 21:35:45 +03:00
pr_info("gmux device not present\n");
ret = -ENODEV;
goto err_release;
}
}
pr_info("Found gmux version %d.%d.%d [%s]\n", ver_major, ver_minor,
ver_release, (gmux_data->indexed ? "indexed" : "classic"));
memset(&props, 0, sizeof(props));
props.type = BACKLIGHT_PLATFORM;
props.max_brightness = gmux_read32(gmux_data, GMUX_PORT_MAX_BRIGHTNESS);
/*
* Currently it's assumed that the maximum brightness is less than
* 2^24 for compatibility with old gmux versions. Cap the max
* brightness at this value, but print a warning if the hardware
* reports something higher so that it can be fixed.
*/
if (WARN_ON(props.max_brightness > GMUX_MAX_BRIGHTNESS))
props.max_brightness = GMUX_MAX_BRIGHTNESS;
bdev = backlight_device_register("gmux_backlight", &pnp->dev,
gmux_data, &gmux_bl_ops, &props);
if (IS_ERR(bdev)) {
ret = PTR_ERR(bdev);
goto err_release;
}
gmux_data->bdev = bdev;
bdev->props.brightness = gmux_get_brightness(bdev);
backlight_update_status(bdev);
/*
* The backlight situation on Macs is complicated. If the gmux is
* present it's the best choice, because it always works for
* backlight control and supports more levels than other options.
* Disable the other backlight choices.
*/
acpi_video_set_dmi_backlight_type(acpi_backlight_vendor);
apple_bl_unregister();
gmux_data->power_state = VGA_SWITCHEROO_ON;
gmux_data->dhandle = ACPI_HANDLE(&pnp->dev);
if (!gmux_data->dhandle) {
pr_err("Cannot find acpi handle for pnp device %s\n",
dev_name(&pnp->dev));
ret = -ENODEV;
goto err_notify;
}
status = acpi_evaluate_integer(gmux_data->dhandle, "GMGP", NULL, &gpe);
if (ACPI_SUCCESS(status)) {
gmux_data->gpe = (int)gpe;
status = acpi_install_notify_handler(gmux_data->dhandle,
ACPI_DEVICE_NOTIFY,
&gmux_notify_handler, pnp);
if (ACPI_FAILURE(status)) {
pr_err("Install notify handler failed: %s\n",
acpi_format_exception(status));
ret = -ENODEV;
goto err_notify;
}
status = acpi_enable_gpe(NULL, gmux_data->gpe);
if (ACPI_FAILURE(status)) {
pr_err("Cannot enable gpe: %s\n",
acpi_format_exception(status));
goto err_enable_gpe;
}
} else {
pr_warn("No GPE found for gmux\n");
gmux_data->gpe = -1;
}
/*
* If Thunderbolt is present, the external DP port is not fully
* switchable. Force its AUX channel to the discrete GPU.
*/
gmux_data->external_switchable =
!bus_for_each_dev(&pci_bus_type, NULL, NULL, is_thunderbolt);
if (!gmux_data->external_switchable)
gmux_write8(gmux_data, GMUX_PORT_SWITCH_EXTERNAL, 3);
apple_gmux_data = gmux_data;
init_completion(&gmux_data->powerchange_done);
gmux_enable_interrupts(gmux_data);
apple-gmux: Track switch state gmux has 3 switch registers: * GMUX_PORT_SWITCH_DISPLAY switches the panel * GMUX_PORT_SWITCH_DDC switches the panel's DDC lines (only on pre-retinas; on retinas this is a no-op) * GMUX_PORT_SWITCH_EXTERNAL switches the external DP port(s) (only on models without Thunderbolt, i.e. introduced before 2011; those with Thunderbolt switch only HPD/AUX, not the main link) Currently we switch all 3 registers in unison. gmux does not preserve the switch state during suspend, so we currently read GMUX_PORT_SWITCH_DISPLAY before suspend and restore all 3 registers to this value on resume. With the upcoming ->switch_ddc callback, GMUX_PORT_SWITCH_DDC may temporarily contain a different value than the other 2 registers. If we happen to suspend at this moment, we'll write an incorrect value to GMUX_PORT_SWITCH_DDC on resume. Also, on models with Thunderbolt the integrated GPU is unable to drive the external DP port(s), so we want to keep GMUX_PORT_SWITCH_EXTERNAL permanently switched to the discrete GPU on those machines. Consequently we can no longer assume that GMUX_PORT_SWITCH_DISPLAY represents the correct value for all 3 registers on suspend. Track the state of all 3 registers: Add gmux_read_switch_state() and gmux_write_switch_state(). Instead of reading the switch state on every suspend, read it once on driver initialization so that we know the current switch state all the time. (This allows us to use some optimizations and shortcuts, e.g. we can skip switching DDC if we know that it's already switched to the requested GPU.) Change the ->switchto callback to use gmux_write_switch_state(). Tested-by: Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/5679f414cb0ddf1654dcc359571f3764b275edf0.1452525860.git.lukas@wunner.de
2016-01-11 22:09:20 +03:00
gmux_read_switch_state(gmux_data);
apple-gmux: Add switch_ddc support Originally by Seth Forshee <seth.forshee@canonical.com>, 2012-10-04: The gmux allows muxing the DDC independently from the display, so support this functionality. This will allow reading the EDID for the inactive GPU, fixing issues with machines that either don't have a VBT or have invalid mode data in the VBT. Modified by Lukas Wunner <lukas@wunner.de>, 2015-04 - 2015-12: Change semantics of ->switch_ddc handler callback to return previous DDC owner. Original version tried to determine previous DDC owner with find_active_client() in vga_switcheroo but this fails if the inactive client registers before the active client. v2.4: Retain semantics of ->switchto handler callback to switch all pins, including DDC (Daniel Vetter) v4: Advertise ->switch_ddc handler callback only on the pre-retina Macbook Pro. The retina uses eDP instead of LVDS and gmux no longer does the muxing itself but merely controls an external mux. That mux is incapable of switching the AUX channel separately from the main link. It's an NXP CBTL06142 (alternate parts: TI HD3SS212, Pericom PI3VDP12412, see datasheets below). v5: Rebase on "apple-gmux: Track switch state". Rebase on "vga_switcheroo: Add handler flags infrastructure". Rebase on 5d170139eb10 ("Constify vga_switcheroo_handler"), requires 2 structs, 1x with ->switchto for pre-retinas, 1x without for retinas). Add error message if handler registration with vga_switcheroo fails. Teardowns identifying the mux: http://www.electronicproducts.com/-whatsinside_text-145.aspx http://slideshare.net/jjwu6266/apple-2012-wwdc-apple-macbook-pro-with-retina-display http://www.techrepublic.com/blog/cracking-open/teardown-shows-retina-macbook-pro-is-nearly-impossible-to-upgrade-difficult-to-work-on/ Mux Datasheets: http://www.nxp.com/documents/data_sheet/CBTL06141.pdf http://www.ti.com/lit/ds/symlink/hd3ss212.pdf https://www.pericom.com/assets/Datasheets/PI3VDP12412.pdf Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115 Tested-by: Lukas Wunner <lukas@wunner.de> [MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina 15"] Cc: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Lukas Wunner <lukas@wunner.de> Reviewed-by: Darren Hart <dvhart@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/17fe8bfb0415d713bb4174f84ac9aae5d7d9a5f8.1452525860.git.lukas@wunner.de
2016-01-11 22:09:20 +03:00
/*
* Retina MacBook Pros cannot switch the panel's AUX separately
* and need eDP pre-calibration. They are distinguishable from
* pre-retinas by having an "indexed" gmux.
*
* Pre-retina MacBook Pros can switch the panel's DDC separately.
*/
if (gmux_data->indexed)
ret = vga_switcheroo_register_handler(&gmux_handler_indexed,
VGA_SWITCHEROO_NEEDS_EDP_CONFIG);
else
ret = vga_switcheroo_register_handler(&gmux_handler_classic,
VGA_SWITCHEROO_CAN_SWITCH_DDC);
if (ret) {
pr_err("Failed to register vga_switcheroo handler\n");
goto err_register_handler;
}
return 0;
err_register_handler:
gmux_disable_interrupts(gmux_data);
apple_gmux_data = NULL;
if (gmux_data->gpe >= 0)
acpi_disable_gpe(NULL, gmux_data->gpe);
err_enable_gpe:
if (gmux_data->gpe >= 0)
acpi_remove_notify_handler(gmux_data->dhandle,
ACPI_DEVICE_NOTIFY,
&gmux_notify_handler);
err_notify:
backlight_device_unregister(bdev);
err_release:
release_region(gmux_data->iostart, gmux_data->iolen);
err_free:
kfree(gmux_data);
return ret;
}
static void gmux_remove(struct pnp_dev *pnp)
{
struct apple_gmux_data *gmux_data = pnp_get_drvdata(pnp);
vga_switcheroo_unregister_handler();
gmux_disable_interrupts(gmux_data);
if (gmux_data->gpe >= 0) {
acpi_disable_gpe(NULL, gmux_data->gpe);
acpi_remove_notify_handler(gmux_data->dhandle,
ACPI_DEVICE_NOTIFY,
&gmux_notify_handler);
}
backlight_device_unregister(gmux_data->bdev);
release_region(gmux_data->iostart, gmux_data->iolen);
apple_gmux_data = NULL;
kfree(gmux_data);
acpi_video_register();
apple_bl_register();
}
static const struct pnp_device_id gmux_device_ids[] = {
{GMUX_ACPI_HID, 0},
{"", 0}
};
static const struct dev_pm_ops gmux_dev_pm_ops = {
.suspend = gmux_suspend,
.resume = gmux_resume,
};
static struct pnp_driver gmux_pnp_driver = {
.name = "apple-gmux",
.probe = gmux_probe,
.remove = gmux_remove,
.id_table = gmux_device_ids,
.driver = {
.pm = &gmux_dev_pm_ops,
},
};
module_pnp_driver(gmux_pnp_driver);
MODULE_AUTHOR("Seth Forshee <seth.forshee@canonical.com>");
MODULE_DESCRIPTION("Apple Gmux Driver");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pnp, gmux_device_ids);