WSL2-Linux-Kernel/drivers/rapidio/Kconfig

93 строки
2.9 KiB
Plaintext
Исходник Обычный вид История

#
# RapidIO configuration
#
source "drivers/rapidio/devices/Kconfig"
config RAPIDIO_DISC_TIMEOUT
int "Discovery timeout duration (seconds)"
depends on RAPIDIO
default "30"
---help---
Amount of time a discovery node waits for a host to complete
enumeration before giving up.
config RAPIDIO_ENABLE_RX_TX_PORTS
bool "Enable RapidIO Input/Output Ports"
depends on RAPIDIO
---help---
The RapidIO specification describes a Output port transmit
enable and a Input port receive enable. The recommended state
for Input ports and Output ports should be disabled. When
this switch is set the RapidIO subsystem will enable all
ports for Input/Output direction to allow other traffic
than Maintenance transfers.
config RAPIDIO_DMA_ENGINE
bool "DMA Engine support for RapidIO"
depends on RAPIDIO
select DMADEVICES
select DMA_ENGINE
help
Say Y here if you want to use DMA Engine frameork for RapidIO data
transfers to/from target RIO devices. RapidIO uses NREAD and
NWRITE (NWRITE_R, SWRITE) requests to transfer data between local
memory and memory on remote target device. You need a DMA controller
capable to perform data transfers to/from RapidIO.
If you are unsure about this, say Y here.
config RAPIDIO_DEBUG
bool "RapidIO subsystem debug messages"
depends on RAPIDIO
help
Say Y here if you want the RapidIO subsystem to produce a bunch of
debug messages to the system log. Select this if you are having a
problem with the RapidIO subsystem and want to see more of what is
going on.
If you are unsure about this, say N here.
rapidio: make enumeration/discovery configurable Systems that use RapidIO fabric may need to implement their own enumeration and discovery methods which are better suitable for needs of a target application. The following set of patches is intended to simplify process of introduction of new RapidIO fabric enumeration/discovery methods. The first patch offers ability to add new RapidIO enumeration/discovery methods using kernel configuration options. This new configuration option mechanism allows to select statically linked or modular enumeration/discovery method(s) from the list of existing methods or use external module(s). This patch also updates the currently existing enumeration/discovery code to be used as a statically linked or modular method. The corresponding configuration option is named "Basic enumeration/discovery" method. This is the only one configuration option available today but new methods are expected to be introduced after adoption of provided patches. The second patch address a long time complaint of RapidIO subsystem users regarding fabric enumeration/discovery start sequence. Existing implementation offers only a boot-time enumeration/discovery start which requires synchronized boot of all endpoints in RapidIO network. While it works for small closed configurations with limited number of endpoints, using this approach in systems with large number of endpoints is quite challenging. To eliminate requirement for synchronized start the second patch introduces RapidIO enumeration/discovery start from user space. For compatibility with the existing RapidIO subsystem implementation, automatic boot time enumeration/discovery start can be configured in by specifying "rio-scan.scan=1" command line parameter if statically linked basic enumeration method is selected. This patch: Rework to implement RapidIO enumeration/discovery method selection combined with ability to use enumeration/discovery as a kernel module. This patch adds ability to introduce new RapidIO enumeration/discovery methods using kernel configuration options. Configuration option mechanism allows to select statically linked or modular enumeration/discovery method from the list of existing methods or use external modules. If a modular enumeration/discovery is selected each RapidIO mport device can have its own method attached to it. The existing enumeration/discovery code was updated to be used as statically linked or modular method. This configuration option is named "Basic enumeration/discovery" method. Several common routines have been moved from rio-scan.c to make them available to other enumeration methods and reduce number of exported symbols. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@Prodrive.nl> Cc: Micha Nelissen <micha.nelissen@Prodrive.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-25 02:55:05 +04:00
choice
prompt "Enumeration method"
depends on RAPIDIO
default RAPIDIO_ENUM_BASIC
help
There are different enumeration and discovery mechanisms offered
for RapidIO subsystem. You may select single built-in method or
or any number of methods to be built as modules.
Selecting a built-in method disables use of loadable methods.
If unsure, select Basic built-in.
config RAPIDIO_ENUM_BASIC
tristate "Basic"
help
This option includes basic RapidIO fabric enumeration and discovery
mechanism similar to one described in RapidIO specification Annex 1.
endchoice
rapidio: add RapidIO channelized messaging driver Add channelized messaging driver to support native RapidIO messaging exchange between multiple senders/recipients on devices that use kernel RapidIO subsystem services. This device driver is the result of collaboration within the RapidIO.org Software Task Group (STG) between Texas Instruments, Prodrive Technologies, Nokia Networks, BAE and IDT. Additional input was received from other members of RapidIO.org. The objective was to create a character mode driver interface which exposes messaging capabilities of RapidIO endpoint devices (mports) directly to applications, in a manner that allows the numerous and varied RapidIO implementations to interoperate. This char mode device driver allows user-space applications to setup messaging communication channels using single shared RapidIO messaging mailbox. By default this driver uses RapidIO MBOX_1 (MBOX_0 is reserved for use by RIONET Ethernet emulation driver). [weiyj.lk@gmail.com: rapidio/rio_cm: fix return value check in riocm_init()] Link: http://lkml.kernel.org/r/1469198221-21970-1-git-send-email-alexandre.bounine@idt.com Link: http://lkml.kernel.org/r/1468952862-18056-1-git-send-email-alexandre.bounine@idt.com Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Tested-by: Barry Wood <barry.wood@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: Andre van Herk <andre.van.herk@prodrive-technologies.com> Cc: Barry Wood <barry.wood@idt.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-03 00:06:25 +03:00
config RAPIDIO_CHMAN
tristate "RapidIO Channelized Messaging driver"
depends on RAPIDIO
help
This option includes RapidIO channelized messaging driver which
provides socket-like interface to allow sharing of single RapidIO
messaging mailbox between multiple user-space applications.
See "Documentation/rapidio/rio_cm.txt" for driver description.
config RAPIDIO_MPORT_CDEV
tristate "RapidIO /dev mport device driver"
depends on RAPIDIO
help
This option includes generic RapidIO mport device driver which
allows to user space applications to perform RapidIO-specific
operations through selected RapidIO mport.
rapidio: convert switch drivers to modules Rework RapidIO switch drivers to add an option to build them as loadable kernel modules. This patch removes RapidIO-specific vmlinux section and converts switch drivers to be compatible with LDM driver registration method. To simplify registration of device-specific callback routines this patch introduces rio_switch_ops data structure. The sw_sysfs() callback is removed from the list of device-specific operations because under the new structure its functions can be handled by switch driver's probe() and remove() routines. If a specific switch device driver is not loaded the RapidIO subsystem core will use default standard-based operations to configure a switch. Because the current implementation of RapidIO enumeration/discovery method relies on availability of device-specific operations for error management, switch device drivers must be loaded before the RapidIO enumeration/discovery starts. This patch also moves several common routines from enumeration/discovery module into the RapidIO core code to make switch-specific operations accessible to all components of RapidIO subsystem. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@Prodrive.nl> Cc: Micha Nelissen <micha.nelissen@Prodrive.nl> Cc: Stef van Os <stef.van.os@Prodrive.nl> Cc: Jean Delvare <jdelvare@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 02:08:50 +04:00
menu "RapidIO Switch drivers"
depends on RAPIDIO
source "drivers/rapidio/switches/Kconfig"
rapidio: convert switch drivers to modules Rework RapidIO switch drivers to add an option to build them as loadable kernel modules. This patch removes RapidIO-specific vmlinux section and converts switch drivers to be compatible with LDM driver registration method. To simplify registration of device-specific callback routines this patch introduces rio_switch_ops data structure. The sw_sysfs() callback is removed from the list of device-specific operations because under the new structure its functions can be handled by switch driver's probe() and remove() routines. If a specific switch device driver is not loaded the RapidIO subsystem core will use default standard-based operations to configure a switch. Because the current implementation of RapidIO enumeration/discovery method relies on availability of device-specific operations for error management, switch device drivers must be loaded before the RapidIO enumeration/discovery starts. This patch also moves several common routines from enumeration/discovery module into the RapidIO core code to make switch-specific operations accessible to all components of RapidIO subsystem. Signed-off-by: Alexandre Bounine <alexandre.bounine@idt.com> Cc: Matt Porter <mporter@kernel.crashing.org> Cc: Li Yang <leoli@freescale.com> Cc: Kumar Gala <galak@kernel.crashing.org> Cc: Andre van Herk <andre.van.herk@Prodrive.nl> Cc: Micha Nelissen <micha.nelissen@Prodrive.nl> Cc: Stef van Os <stef.van.os@Prodrive.nl> Cc: Jean Delvare <jdelvare@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-04 02:08:50 +04:00
endmenu