WSL2-Linux-Kernel/drivers/scsi/bnx2fc/bnx2fc_constants.h

207 строки
8.7 KiB
C
Исходник Обычный вид История

#ifndef __BNX2FC_CONSTANTS_H_
#define __BNX2FC_CONSTANTS_H_
/**
* This file defines HSI constants for the FCoE flows
*/
/* KWQ/KCQ FCoE layer code */
#define FCOE_KWQE_LAYER_CODE (7)
/* KWQ (kernel work queue) request op codes */
#define FCOE_KWQE_OPCODE_INIT1 (0)
#define FCOE_KWQE_OPCODE_INIT2 (1)
#define FCOE_KWQE_OPCODE_INIT3 (2)
#define FCOE_KWQE_OPCODE_OFFLOAD_CONN1 (3)
#define FCOE_KWQE_OPCODE_OFFLOAD_CONN2 (4)
#define FCOE_KWQE_OPCODE_OFFLOAD_CONN3 (5)
#define FCOE_KWQE_OPCODE_OFFLOAD_CONN4 (6)
#define FCOE_KWQE_OPCODE_ENABLE_CONN (7)
#define FCOE_KWQE_OPCODE_DISABLE_CONN (8)
#define FCOE_KWQE_OPCODE_DESTROY_CONN (9)
#define FCOE_KWQE_OPCODE_DESTROY (10)
#define FCOE_KWQE_OPCODE_STAT (11)
/* KCQ (kernel completion queue) response op codes */
#define FCOE_KCQE_OPCODE_INIT_FUNC (0x10)
#define FCOE_KCQE_OPCODE_DESTROY_FUNC (0x11)
#define FCOE_KCQE_OPCODE_STAT_FUNC (0x12)
#define FCOE_KCQE_OPCODE_OFFLOAD_CONN (0x15)
#define FCOE_KCQE_OPCODE_ENABLE_CONN (0x16)
#define FCOE_KCQE_OPCODE_DISABLE_CONN (0x17)
#define FCOE_KCQE_OPCODE_DESTROY_CONN (0x18)
#define FCOE_KCQE_OPCODE_CQ_EVENT_NOTIFICATION (0x20)
#define FCOE_KCQE_OPCODE_FCOE_ERROR (0x21)
/* KCQ (kernel completion queue) completion status */
#define FCOE_KCQE_COMPLETION_STATUS_SUCCESS (0x0)
#define FCOE_KCQE_COMPLETION_STATUS_ERROR (0x1)
#define FCOE_KCQE_COMPLETION_STATUS_INVALID_OPCODE (0x2)
#define FCOE_KCQE_COMPLETION_STATUS_CTX_ALLOC_FAILURE (0x3)
#define FCOE_KCQE_COMPLETION_STATUS_CTX_FREE_FAILURE (0x4)
#define FCOE_KCQE_COMPLETION_STATUS_NIC_ERROR (0x5)
/* Unsolicited CQE type */
#define FCOE_UNSOLICITED_FRAME_CQE_TYPE 0
#define FCOE_ERROR_DETECTION_CQE_TYPE 1
#define FCOE_WARNING_DETECTION_CQE_TYPE 2
/* Task context constants */
/* After driver has initialize the task in case timer services required */
#define FCOE_TASK_TX_STATE_INIT 0
/* In case timer services are required then shall be updated by Xstorm after
* start processing the task. In case no timer facilities are required then the
* driver would initialize the state to this value */
#define FCOE_TASK_TX_STATE_NORMAL 1
/* Task is under abort procedure. Updated in order to stop processing of
* pending WQEs on this task */
#define FCOE_TASK_TX_STATE_ABORT 2
/* For E_D_T_TOV timer expiration in Xstorm (Class 2 only) */
#define FCOE_TASK_TX_STATE_ERROR 3
/* For REC_TOV timer expiration indication received from Xstorm */
#define FCOE_TASK_TX_STATE_WARNING 4
/* For completed unsolicited task */
#define FCOE_TASK_TX_STATE_UNSOLICITED_COMPLETED 5
/* For exchange cleanup request task */
#define FCOE_TASK_TX_STATE_EXCHANGE_CLEANUP 6
/* For sequence cleanup request task */
#define FCOE_TASK_TX_STATE_SEQUENCE_CLEANUP 7
/* Mark task as aborted and indicate that ABTS was not transmitted */
#define FCOE_TASK_TX_STATE_BEFORE_ABTS_TX 8
/* Mark task as aborted and indicate that ABTS was transmitted */
#define FCOE_TASK_TX_STATE_AFTER_ABTS_TX 9
/* For completion the ABTS task. */
#define FCOE_TASK_TX_STATE_ABTS_TX_COMPLETED 10
/* Mark task as aborted and indicate that Exchange cleanup was not transmitted
*/
#define FCOE_TASK_TX_STATE_BEFORE_EXCHANGE_CLEANUP_TX 11
/* Mark task as aborted and indicate that Exchange cleanup was transmitted */
#define FCOE_TASK_TX_STATE_AFTER_EXCHANGE_CLEANUP_TX 12
#define FCOE_TASK_RX_STATE_NORMAL 0
#define FCOE_TASK_RX_STATE_COMPLETED 1
/* Obsolete: Intermediate completion (middle path with local completion) */
#define FCOE_TASK_RX_STATE_INTER_COMP 2
/* For REC_TOV timer expiration indication received from Xstorm */
#define FCOE_TASK_RX_STATE_WARNING 3
/* For E_D_T_TOV timer expiration in Ustorm */
#define FCOE_TASK_RX_STATE_ERROR 4
/* ABTS ACC arrived wait for local completion to finally complete the task. */
#define FCOE_TASK_RX_STATE_ABTS_ACC_ARRIVED 5
/* local completion arrived wait for ABTS ACC to finally complete the task. */
#define FCOE_TASK_RX_STATE_ABTS_LOCAL_COMP_ARRIVED 6
/* Special completion indication in case of task was aborted. */
#define FCOE_TASK_RX_STATE_ABTS_COMPLETED 7
/* Special completion indication in case of task was cleaned. */
#define FCOE_TASK_RX_STATE_EXCHANGE_CLEANUP_COMPLETED 8
/* Special completion indication (in task requested the exchange cleanup) in
* case cleaned task is in non-valid. */
#define FCOE_TASK_RX_STATE_ABORT_CLEANUP_COMPLETED 9
/* Special completion indication (in task requested the sequence cleanup) in
* case cleaned task was already returned to normal. */
#define FCOE_TASK_RX_STATE_IGNORED_SEQUENCE_CLEANUP 10
/* Exchange cleanup arrived wait until xfer will be handled to finally
* complete the task. */
#define FCOE_TASK_RX_STATE_EXCHANGE_CLEANUP_ARRIVED 11
/* Xfer handled, wait for exchange cleanup to finally complete the task. */
#define FCOE_TASK_RX_STATE_EXCHANGE_CLEANUP_HANDLED_XFER 12
#define FCOE_TASK_TYPE_WRITE 0
#define FCOE_TASK_TYPE_READ 1
#define FCOE_TASK_TYPE_MIDPATH 2
#define FCOE_TASK_TYPE_UNSOLICITED 3
#define FCOE_TASK_TYPE_ABTS 4
#define FCOE_TASK_TYPE_EXCHANGE_CLEANUP 5
#define FCOE_TASK_TYPE_SEQUENCE_CLEANUP 6
#define FCOE_TASK_DEV_TYPE_DISK 0
#define FCOE_TASK_DEV_TYPE_TAPE 1
#define FCOE_TASK_CLASS_TYPE_3 0
#define FCOE_TASK_CLASS_TYPE_2 1
/* Everest FCoE connection type */
#define B577XX_FCOE_CONNECTION_TYPE 4
/* Error codes for Error Reporting in fast path flows */
/* XFER error codes */
#define FCOE_ERROR_CODE_XFER_OOO_RO 0
#define FCOE_ERROR_CODE_XFER_RO_NOT_ALIGNED 1
#define FCOE_ERROR_CODE_XFER_NULL_BURST_LEN 2
#define FCOE_ERROR_CODE_XFER_RO_GREATER_THAN_DATA2TRNS 3
#define FCOE_ERROR_CODE_XFER_INVALID_PAYLOAD_SIZE 4
#define FCOE_ERROR_CODE_XFER_TASK_TYPE_NOT_WRITE 5
#define FCOE_ERROR_CODE_XFER_PEND_XFER_SET 6
#define FCOE_ERROR_CODE_XFER_OPENED_SEQ 7
#define FCOE_ERROR_CODE_XFER_FCTL 8
/* FCP RSP error codes */
#define FCOE_ERROR_CODE_FCP_RSP_BIDI_FLAGS_SET 9
#define FCOE_ERROR_CODE_FCP_RSP_UNDERFLOW 10
#define FCOE_ERROR_CODE_FCP_RSP_OVERFLOW 11
#define FCOE_ERROR_CODE_FCP_RSP_INVALID_LENGTH_FIELD 12
#define FCOE_ERROR_CODE_FCP_RSP_INVALID_SNS_FIELD 13
#define FCOE_ERROR_CODE_FCP_RSP_INVALID_PAYLOAD_SIZE 14
#define FCOE_ERROR_CODE_FCP_RSP_PEND_XFER_SET 15
#define FCOE_ERROR_CODE_FCP_RSP_OPENED_SEQ 16
#define FCOE_ERROR_CODE_FCP_RSP_FCTL 17
#define FCOE_ERROR_CODE_FCP_RSP_LAST_SEQ_RESET 18
#define FCOE_ERROR_CODE_FCP_RSP_CONF_REQ_NOT_SUPPORTED_YET 19
/* FCP DATA error codes */
#define FCOE_ERROR_CODE_DATA_OOO_RO 20
#define FCOE_ERROR_CODE_DATA_EXCEEDS_DEFINED_MAX_FRAME_SIZE 21
#define FCOE_ERROR_CODE_DATA_EXCEEDS_DATA2TRNS 22
#define FCOE_ERROR_CODE_DATA_SOFI3_SEQ_ACTIVE_SET 23
#define FCOE_ERROR_CODE_DATA_SOFN_SEQ_ACTIVE_RESET 24
#define FCOE_ERROR_CODE_DATA_EOFN_END_SEQ_SET 25
#define FCOE_ERROR_CODE_DATA_EOFT_END_SEQ_RESET 26
#define FCOE_ERROR_CODE_DATA_TASK_TYPE_NOT_READ 27
#define FCOE_ERROR_CODE_DATA_FCTL 28
/* Middle path error codes */
#define FCOE_ERROR_CODE_MIDPATH_TYPE_NOT_ELS 29
#define FCOE_ERROR_CODE_MIDPATH_SOFI3_SEQ_ACTIVE_SET 30
#define FCOE_ERROR_CODE_MIDPATH_SOFN_SEQ_ACTIVE_RESET 31
#define FCOE_ERROR_CODE_MIDPATH_EOFN_END_SEQ_SET 32
#define FCOE_ERROR_CODE_MIDPATH_EOFT_END_SEQ_RESET 33
#define FCOE_ERROR_CODE_MIDPATH_ELS_REPLY_FCTL 34
#define FCOE_ERROR_CODE_MIDPATH_INVALID_REPLY 35
#define FCOE_ERROR_CODE_MIDPATH_ELS_REPLY_RCTL 36
/* ABTS error codes */
#define FCOE_ERROR_CODE_ABTS_REPLY_F_CTL 37
#define FCOE_ERROR_CODE_ABTS_REPLY_DDF_RCTL_FIELD 38
#define FCOE_ERROR_CODE_ABTS_REPLY_INVALID_BLS_RCTL 39
#define FCOE_ERROR_CODE_ABTS_REPLY_INVALID_RCTL 40
#define FCOE_ERROR_CODE_ABTS_REPLY_RCTL_GENERAL_MISMATCH 41
/* Common error codes */
#define FCOE_ERROR_CODE_COMMON_MIDDLE_FRAME_WITH_PAD 42
#define FCOE_ERROR_CODE_COMMON_SEQ_INIT_IN_TCE 43
#define FCOE_ERROR_CODE_COMMON_FC_HDR_RX_ID_MISMATCH 44
#define FCOE_ERROR_CODE_COMMON_INCORRECT_SEQ_CNT 45
#define FCOE_ERROR_CODE_COMMON_DATA_FC_HDR_FCP_TYPE_MISMATCH 46
#define FCOE_ERROR_CODE_COMMON_DATA_NO_MORE_SGES 47
#define FCOE_ERROR_CODE_COMMON_OPTIONAL_FC_HDR 48
#define FCOE_ERROR_CODE_COMMON_READ_TCE_OX_ID_TOO_BIG 49
#define FCOE_ERROR_CODE_COMMON_DATA_WAS_NOT_TRANSMITTED 50
/* Unsolicited Rx error codes */
#define FCOE_ERROR_CODE_UNSOLICITED_TYPE_NOT_ELS 51
#define FCOE_ERROR_CODE_UNSOLICITED_TYPE_NOT_BLS 52
#define FCOE_ERROR_CODE_UNSOLICITED_FCTL_ELS 53
#define FCOE_ERROR_CODE_UNSOLICITED_FCTL_BLS 54
#define FCOE_ERROR_CODE_UNSOLICITED_R_CTL 55
#define FCOE_ERROR_CODE_RW_TASK_DDF_RCTL_INFO_FIELD 56
#define FCOE_ERROR_CODE_RW_TASK_INVALID_RCTL 57
#define FCOE_ERROR_CODE_RW_TASK_RCTL_GENERAL_MISMATCH 58
/* Timer error codes */
#define FCOE_ERROR_CODE_E_D_TOV_TIMER_EXPIRATION 60
#define FCOE_ERROR_CODE_REC_TOV_TIMER_EXPIRATION 61
#endif /* BNX2FC_CONSTANTS_H_ */