WSL2-Linux-Kernel/fs/f2fs/node.c

2865 строки
68 KiB
C
Исходник Обычный вид История

/*
* fs/f2fs/node.c
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/fs.h>
#include <linux/f2fs_fs.h>
#include <linux/mpage.h>
#include <linux/backing-dev.h>
#include <linux/blkdev.h>
#include <linux/pagevec.h>
#include <linux/swap.h>
#include "f2fs.h"
#include "node.h"
#include "segment.h"
#include "xattr.h"
#include "trace.h"
#include <trace/events/f2fs.h>
#define on_build_free_nids(nmi) mutex_is_locked(&(nm_i)->build_lock)
static struct kmem_cache *nat_entry_slab;
static struct kmem_cache *free_nid_slab;
f2fs: refactor flush_nat_entries codes for reducing NAT writes Although building NAT journal in cursum reduce the read/write work for NAT block, but previous design leave us lower performance when write checkpoint frequently for these cases: 1. if journal in cursum has already full, it's a bit of waste that we flush all nat entries to page for persistence, but not to cache any entries. 2. if journal in cursum is not full, we fill nat entries to journal util journal is full, then flush the left dirty entries to disk without merge journaled entries, so these journaled entries may be flushed to disk at next checkpoint but lost chance to flushed last time. In this patch we merge dirty entries located in same NAT block to nat entry set, and linked all set to list, sorted ascending order by entries' count of set. Later we flush entries in sparse set into journal as many as we can, and then flush merged entries to disk. In this way we can not only gain in performance, but also save lifetime of flash device. In my testing environment, it shows this patch can help to reduce NAT block writes obviously. In hard disk test case: cost time of fsstress is stablely reduced by about 5%. 1. virtual machine + hard disk: fsstress -p 20 -n 200 -l 5 node num cp count nodes/cp based 4599.6 1803.0 2.551 patched 2714.6 1829.6 1.483 2. virtual machine + 32g micro SD card: fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0 -f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5 -f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S node num cp count nodes/cp based 84.5 43.7 1.933 patched 49.2 40.0 1.23 Our latency of merging op shows not bad when handling extreme case like: merging a great number of dirty nats: latency(ns) dirty nat count 3089219 24922 5129423 27422 4000250 24523 change log from v1: o fix wrong logic in add_nat_entry when grab a new nat entry set. o swith to create slab cache in create_node_manager_caches. o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency. change log from v2: o make comment position more appropriate suggested by Jaegeuk Kim. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
static struct kmem_cache *nat_entry_set_slab;
bool available_free_memory(struct f2fs_sb_info *sbi, int type)
{
struct f2fs_nm_info *nm_i = NM_I(sbi);
struct sysinfo val;
unsigned long avail_ram;
unsigned long mem_size = 0;
bool res = false;
si_meminfo(&val);
/* only uses low memory */
avail_ram = val.totalram - val.totalhigh;
/*
* give 25%, 25%, 50%, 50%, 50% memory for each components respectively
*/
if (type == FREE_NIDS) {
mem_size = (nm_i->nid_cnt[FREE_NID] *
sizeof(struct free_nid)) >> PAGE_SHIFT;
res = mem_size < ((avail_ram * nm_i->ram_thresh / 100) >> 2);
} else if (type == NAT_ENTRIES) {
mem_size = (nm_i->nat_cnt * sizeof(struct nat_entry)) >>
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 15:29:47 +03:00
PAGE_SHIFT;
res = mem_size < ((avail_ram * nm_i->ram_thresh / 100) >> 2);
if (excess_cached_nats(sbi))
res = false;
} else if (type == DIRTY_DENTS) {
if (sbi->sb->s_bdi->wb.dirty_exceeded)
return false;
mem_size = get_pages(sbi, F2FS_DIRTY_DENTS);
res = mem_size < ((avail_ram * nm_i->ram_thresh / 100) >> 1);
} else if (type == INO_ENTRIES) {
int i;
for (i = 0; i < MAX_INO_ENTRY; i++)
mem_size += sbi->im[i].ino_num *
sizeof(struct ino_entry);
mem_size >>= PAGE_SHIFT;
res = mem_size < ((avail_ram * nm_i->ram_thresh / 100) >> 1);
} else if (type == EXTENT_CACHE) {
mem_size = (atomic_read(&sbi->total_ext_tree) *
sizeof(struct extent_tree) +
atomic_read(&sbi->total_ext_node) *
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 15:29:47 +03:00
sizeof(struct extent_node)) >> PAGE_SHIFT;
res = mem_size < ((avail_ram * nm_i->ram_thresh / 100) >> 1);
} else if (type == INMEM_PAGES) {
/* it allows 20% / total_ram for inmemory pages */
mem_size = get_pages(sbi, F2FS_INMEM_PAGES);
res = mem_size < (val.totalram / 5);
} else {
if (!sbi->sb->s_bdi->wb.dirty_exceeded)
return true;
}
return res;
}
static void clear_node_page_dirty(struct page *page)
{
struct address_space *mapping = page->mapping;
unsigned int long flags;
if (PageDirty(page)) {
spin_lock_irqsave(&mapping->tree_lock, flags);
radix_tree_tag_clear(&mapping->page_tree,
page_index(page),
PAGECACHE_TAG_DIRTY);
spin_unlock_irqrestore(&mapping->tree_lock, flags);
clear_page_dirty_for_io(page);
dec_page_count(F2FS_M_SB(mapping), F2FS_DIRTY_NODES);
}
ClearPageUptodate(page);
}
static struct page *get_current_nat_page(struct f2fs_sb_info *sbi, nid_t nid)
{
pgoff_t index = current_nat_addr(sbi, nid);
return get_meta_page(sbi, index);
}
static struct page *get_next_nat_page(struct f2fs_sb_info *sbi, nid_t nid)
{
struct page *src_page;
struct page *dst_page;
pgoff_t src_off;
pgoff_t dst_off;
void *src_addr;
void *dst_addr;
struct f2fs_nm_info *nm_i = NM_I(sbi);
src_off = current_nat_addr(sbi, nid);
dst_off = next_nat_addr(sbi, src_off);
/* get current nat block page with lock */
src_page = get_meta_page(sbi, src_off);
dst_page = grab_meta_page(sbi, dst_off);
f2fs_bug_on(sbi, PageDirty(src_page));
src_addr = page_address(src_page);
dst_addr = page_address(dst_page);
mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-01 15:29:47 +03:00
memcpy(dst_addr, src_addr, PAGE_SIZE);
set_page_dirty(dst_page);
f2fs_put_page(src_page, 1);
set_to_next_nat(nm_i, nid);
return dst_page;
}
static struct nat_entry *__alloc_nat_entry(nid_t nid, bool no_fail)
{
struct nat_entry *new;
if (no_fail)
new = f2fs_kmem_cache_alloc(nat_entry_slab, GFP_F2FS_ZERO);
else
new = kmem_cache_alloc(nat_entry_slab, GFP_F2FS_ZERO);
if (new) {
nat_set_nid(new, nid);
nat_reset_flag(new);
}
return new;
}
static void __free_nat_entry(struct nat_entry *e)
{
kmem_cache_free(nat_entry_slab, e);
}
/* must be locked by nat_tree_lock */
static struct nat_entry *__init_nat_entry(struct f2fs_nm_info *nm_i,
struct nat_entry *ne, struct f2fs_nat_entry *raw_ne, bool no_fail)
{
if (no_fail)
f2fs_radix_tree_insert(&nm_i->nat_root, nat_get_nid(ne), ne);
else if (radix_tree_insert(&nm_i->nat_root, nat_get_nid(ne), ne))
return NULL;
if (raw_ne)
node_info_from_raw_nat(&ne->ni, raw_ne);
list_add_tail(&ne->list, &nm_i->nat_entries);
nm_i->nat_cnt++;
return ne;
}
static struct nat_entry *__lookup_nat_cache(struct f2fs_nm_info *nm_i, nid_t n)
{
return radix_tree_lookup(&nm_i->nat_root, n);
}
static unsigned int __gang_lookup_nat_cache(struct f2fs_nm_info *nm_i,
nid_t start, unsigned int nr, struct nat_entry **ep)
{
return radix_tree_gang_lookup(&nm_i->nat_root, (void **)ep, start, nr);
}
static void __del_from_nat_cache(struct f2fs_nm_info *nm_i, struct nat_entry *e)
{
list_del(&e->list);
radix_tree_delete(&nm_i->nat_root, nat_get_nid(e));
nm_i->nat_cnt--;
__free_nat_entry(e);
}
static void __set_nat_cache_dirty(struct f2fs_nm_info *nm_i,
struct nat_entry *ne)
{
nid_t set = NAT_BLOCK_OFFSET(ne->ni.nid);
struct nat_entry_set *head;
head = radix_tree_lookup(&nm_i->nat_set_root, set);
if (!head) {
head = f2fs_kmem_cache_alloc(nat_entry_set_slab, GFP_NOFS);
INIT_LIST_HEAD(&head->entry_list);
INIT_LIST_HEAD(&head->set_list);
head->set = set;
head->entry_cnt = 0;
f2fs_radix_tree_insert(&nm_i->nat_set_root, set, head);
}
if (get_nat_flag(ne, IS_DIRTY))
goto refresh_list;
nm_i->dirty_nat_cnt++;
head->entry_cnt++;
set_nat_flag(ne, IS_DIRTY, true);
refresh_list:
if (nat_get_blkaddr(ne) == NEW_ADDR)
list_del_init(&ne->list);
else
list_move_tail(&ne->list, &head->entry_list);
}
static void __clear_nat_cache_dirty(struct f2fs_nm_info *nm_i,
struct nat_entry_set *set, struct nat_entry *ne)
{
list_move_tail(&ne->list, &nm_i->nat_entries);
set_nat_flag(ne, IS_DIRTY, false);
set->entry_cnt--;
nm_i->dirty_nat_cnt--;
}
static unsigned int __gang_lookup_nat_set(struct f2fs_nm_info *nm_i,
nid_t start, unsigned int nr, struct nat_entry_set **ep)
{
return radix_tree_gang_lookup(&nm_i->nat_set_root, (void **)ep,
start, nr);
}
int need_dentry_mark(struct f2fs_sb_info *sbi, nid_t nid)
{
struct f2fs_nm_info *nm_i = NM_I(sbi);
struct nat_entry *e;
bool need = false;
down_read(&nm_i->nat_tree_lock);
e = __lookup_nat_cache(nm_i, nid);
if (e) {
if (!get_nat_flag(e, IS_CHECKPOINTED) &&
!get_nat_flag(e, HAS_FSYNCED_INODE))
need = true;
}
up_read(&nm_i->nat_tree_lock);
return need;
}
bool is_checkpointed_node(struct f2fs_sb_info *sbi, nid_t nid)
{
struct f2fs_nm_info *nm_i = NM_I(sbi);
struct nat_entry *e;
bool is_cp = true;
down_read(&nm_i->nat_tree_lock);
e = __lookup_nat_cache(nm_i, nid);
if (e && !get_nat_flag(e, IS_CHECKPOINTED))
is_cp = false;
up_read(&nm_i->nat_tree_lock);
return is_cp;
}
f2fs: fix conditions to remain recovery information in f2fs_sync_file This patch revisited whole the recovery information during the f2fs_sync_file. In this patch, there are three information to make a decision. a) IS_CHECKPOINTED, /* is it checkpointed before? */ b) HAS_FSYNCED_INODE, /* is the inode fsynced before? */ c) HAS_LAST_FSYNC, /* has the latest node fsync mark? */ And, the scenarios for our rule are based on: [Term] F: fsync_mark, D: dentry_mark 1. inode(x) | CP | inode(x) | dnode(F) 2. inode(x) | CP | inode(F) | dnode(F) 3. inode(x) | CP | dnode(F) | inode(x) | inode(F) 4. inode(x) | CP | dnode(F) | inode(F) 5. CP | inode(x) | dnode(F) | inode(DF) 6. CP | inode(DF) | dnode(F) 7. CP | dnode(F) | inode(DF) 8. CP | dnode(F) | inode(x) | inode(DF) For example, #3, the three conditions should be changed as follows. inode(x) | CP | dnode(F) | inode(x) | inode(F) a) x o o o o b) x x x x o c) x o o x o If f2fs_sync_file stops ------^, it should write inode(F) --------------^ So, the need_inode_block_update should return true, since c) get_nat_flag(e, HAS_LAST_FSYNC), is false. For example, #8, CP | alloc | dnode(F) | inode(x) | inode(DF) a) o x x x x b) x x x o c) o o x o If f2fs_sync_file stops -------^, it should write inode(DF) --------------^ Note that, the roll-forward policy should follow this rule, which means, if there are any missing blocks, we doesn't need to recover that inode. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-16 01:50:48 +04:00
bool need_inode_block_update(struct f2fs_sb_info *sbi, nid_t ino)
{
struct f2fs_nm_info *nm_i = NM_I(sbi);
struct nat_entry *e;
f2fs: fix conditions to remain recovery information in f2fs_sync_file This patch revisited whole the recovery information during the f2fs_sync_file. In this patch, there are three information to make a decision. a) IS_CHECKPOINTED, /* is it checkpointed before? */ b) HAS_FSYNCED_INODE, /* is the inode fsynced before? */ c) HAS_LAST_FSYNC, /* has the latest node fsync mark? */ And, the scenarios for our rule are based on: [Term] F: fsync_mark, D: dentry_mark 1. inode(x) | CP | inode(x) | dnode(F) 2. inode(x) | CP | inode(F) | dnode(F) 3. inode(x) | CP | dnode(F) | inode(x) | inode(F) 4. inode(x) | CP | dnode(F) | inode(F) 5. CP | inode(x) | dnode(F) | inode(DF) 6. CP | inode(DF) | dnode(F) 7. CP | dnode(F) | inode(DF) 8. CP | dnode(F) | inode(x) | inode(DF) For example, #3, the three conditions should be changed as follows. inode(x) | CP | dnode(F) | inode(x) | inode(F) a) x o o o o b) x x x x o c) x o o x o If f2fs_sync_file stops ------^, it should write inode(F) --------------^ So, the need_inode_block_update should return true, since c) get_nat_flag(e, HAS_LAST_FSYNC), is false. For example, #8, CP | alloc | dnode(F) | inode(x) | inode(DF) a) o x x x x b) x x x o c) o o x o If f2fs_sync_file stops -------^, it should write inode(DF) --------------^ Note that, the roll-forward policy should follow this rule, which means, if there are any missing blocks, we doesn't need to recover that inode. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-16 01:50:48 +04:00
bool need_update = true;
down_read(&nm_i->nat_tree_lock);
f2fs: fix conditions to remain recovery information in f2fs_sync_file This patch revisited whole the recovery information during the f2fs_sync_file. In this patch, there are three information to make a decision. a) IS_CHECKPOINTED, /* is it checkpointed before? */ b) HAS_FSYNCED_INODE, /* is the inode fsynced before? */ c) HAS_LAST_FSYNC, /* has the latest node fsync mark? */ And, the scenarios for our rule are based on: [Term] F: fsync_mark, D: dentry_mark 1. inode(x) | CP | inode(x) | dnode(F) 2. inode(x) | CP | inode(F) | dnode(F) 3. inode(x) | CP | dnode(F) | inode(x) | inode(F) 4. inode(x) | CP | dnode(F) | inode(F) 5. CP | inode(x) | dnode(F) | inode(DF) 6. CP | inode(DF) | dnode(F) 7. CP | dnode(F) | inode(DF) 8. CP | dnode(F) | inode(x) | inode(DF) For example, #3, the three conditions should be changed as follows. inode(x) | CP | dnode(F) | inode(x) | inode(F) a) x o o o o b) x x x x o c) x o o x o If f2fs_sync_file stops ------^, it should write inode(F) --------------^ So, the need_inode_block_update should return true, since c) get_nat_flag(e, HAS_LAST_FSYNC), is false. For example, #8, CP | alloc | dnode(F) | inode(x) | inode(DF) a) o x x x x b) x x x o c) o o x o If f2fs_sync_file stops -------^, it should write inode(DF) --------------^ Note that, the roll-forward policy should follow this rule, which means, if there are any missing blocks, we doesn't need to recover that inode. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-16 01:50:48 +04:00
e = __lookup_nat_cache(nm_i, ino);
if (e && get_nat_flag(e, HAS_LAST_FSYNC) &&
(get_nat_flag(e, IS_CHECKPOINTED) ||
get_nat_flag(e, HAS_FSYNCED_INODE)))
need_update = false;
up_read(&nm_i->nat_tree_lock);
f2fs: fix conditions to remain recovery information in f2fs_sync_file This patch revisited whole the recovery information during the f2fs_sync_file. In this patch, there are three information to make a decision. a) IS_CHECKPOINTED, /* is it checkpointed before? */ b) HAS_FSYNCED_INODE, /* is the inode fsynced before? */ c) HAS_LAST_FSYNC, /* has the latest node fsync mark? */ And, the scenarios for our rule are based on: [Term] F: fsync_mark, D: dentry_mark 1. inode(x) | CP | inode(x) | dnode(F) 2. inode(x) | CP | inode(F) | dnode(F) 3. inode(x) | CP | dnode(F) | inode(x) | inode(F) 4. inode(x) | CP | dnode(F) | inode(F) 5. CP | inode(x) | dnode(F) | inode(DF) 6. CP | inode(DF) | dnode(F) 7. CP | dnode(F) | inode(DF) 8. CP | dnode(F) | inode(x) | inode(DF) For example, #3, the three conditions should be changed as follows. inode(x) | CP | dnode(F) | inode(x) | inode(F) a) x o o o o b) x x x x o c) x o o x o If f2fs_sync_file stops ------^, it should write inode(F) --------------^ So, the need_inode_block_update should return true, since c) get_nat_flag(e, HAS_LAST_FSYNC), is false. For example, #8, CP | alloc | dnode(F) | inode(x) | inode(DF) a) o x x x x b) x x x o c) o o x o If f2fs_sync_file stops -------^, it should write inode(DF) --------------^ Note that, the roll-forward policy should follow this rule, which means, if there are any missing blocks, we doesn't need to recover that inode. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-16 01:50:48 +04:00
return need_update;
}
/* must be locked by nat_tree_lock */
static void cache_nat_entry(struct f2fs_sb_info *sbi, nid_t nid,
struct f2fs_nat_entry *ne)
{
struct f2fs_nm_info *nm_i = NM_I(sbi);
struct nat_entry *new, *e;
new = __alloc_nat_entry(nid, false);
if (!new)
return;
down_write(&nm_i->nat_tree_lock);
e = __lookup_nat_cache(nm_i, nid);
if (!e)
e = __init_nat_entry(nm_i, new, ne, false);
else
f2fs_bug_on(sbi, nat_get_ino(e) != le32_to_cpu(ne->ino) ||
nat_get_blkaddr(e) !=
le32_to_cpu(ne->block_addr) ||
nat_get_version(e) != ne->version);
up_write(&nm_i->nat_tree_lock);
if (e != new)
__free_nat_entry(new);
}
static void set_node_addr(struct f2fs_sb_info *sbi, struct node_info *ni,
block_t new_blkaddr, bool fsync_done)
{
struct f2fs_nm_info *nm_i = NM_I(sbi);
struct nat_entry *e;
struct nat_entry *new = __alloc_nat_entry(ni->nid, true);
down_write(&nm_i->nat_tree_lock);
e = __lookup_nat_cache(nm_i, ni->nid);
if (!e) {
e = __init_nat_entry(nm_i, new, NULL, true);
copy_node_info(&e->ni, ni);
f2fs_bug_on(sbi, ni->blk_addr == NEW_ADDR);
} else if (new_blkaddr == NEW_ADDR) {
/*
* when nid is reallocated,
* previous nat entry can be remained in nat cache.
* So, reinitialize it with new information.
*/
copy_node_info(&e->ni, ni);
f2fs_bug_on(sbi, ni->blk_addr != NULL_ADDR);
}
/* let's free early to reduce memory consumption */
if (e != new)
__free_nat_entry(new);
/* sanity check */
f2fs_bug_on(sbi, nat_get_blkaddr(e) != ni->blk_addr);
f2fs_bug_on(sbi, nat_get_blkaddr(e) == NULL_ADDR &&
new_blkaddr == NULL_ADDR);
f2fs_bug_on(sbi, nat_get_blkaddr(e) == NEW_ADDR &&
new_blkaddr == NEW_ADDR);
f2fs_bug_on(sbi, nat_get_blkaddr(e) != NEW_ADDR &&
nat_get_blkaddr(e) != NULL_ADDR &&
new_blkaddr == NEW_ADDR);
/* increment version no as node is removed */
if (nat_get_blkaddr(e) != NEW_ADDR && new_blkaddr == NULL_ADDR) {
unsigned char version = nat_get_version(e);
nat_set_version(e, inc_node_version(version));
}
/* change address */
nat_set_blkaddr(e, new_blkaddr);
f2fs: fix conditions to remain recovery information in f2fs_sync_file This patch revisited whole the recovery information during the f2fs_sync_file. In this patch, there are three information to make a decision. a) IS_CHECKPOINTED, /* is it checkpointed before? */ b) HAS_FSYNCED_INODE, /* is the inode fsynced before? */ c) HAS_LAST_FSYNC, /* has the latest node fsync mark? */ And, the scenarios for our rule are based on: [Term] F: fsync_mark, D: dentry_mark 1. inode(x) | CP | inode(x) | dnode(F) 2. inode(x) | CP | inode(F) | dnode(F) 3. inode(x) | CP | dnode(F) | inode(x) | inode(F) 4. inode(x) | CP | dnode(F) | inode(F) 5. CP | inode(x) | dnode(F) | inode(DF) 6. CP | inode(DF) | dnode(F) 7. CP | dnode(F) | inode(DF) 8. CP | dnode(F) | inode(x) | inode(DF) For example, #3, the three conditions should be changed as follows. inode(x) | CP | dnode(F) | inode(x) | inode(F) a) x o o o o b) x x x x o c) x o o x o If f2fs_sync_file stops ------^, it should write inode(F) --------------^ So, the need_inode_block_update should return true, since c) get_nat_flag(e, HAS_LAST_FSYNC), is false. For example, #8, CP | alloc | dnode(F) | inode(x) | inode(DF) a) o x x x x b) x x x o c) o o x o If f2fs_sync_file stops -------^, it should write inode(DF) --------------^ Note that, the roll-forward policy should follow this rule, which means, if there are any missing blocks, we doesn't need to recover that inode. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-16 01:50:48 +04:00
if (new_blkaddr == NEW_ADDR || new_blkaddr == NULL_ADDR)
set_nat_flag(e, IS_CHECKPOINTED, false);
__set_nat_cache_dirty(nm_i, e);
/* update fsync_mark if its inode nat entry is still alive */
if (ni->nid != ni->ino)
e = __lookup_nat_cache(nm_i, ni->ino);
f2fs: fix conditions to remain recovery information in f2fs_sync_file This patch revisited whole the recovery information during the f2fs_sync_file. In this patch, there are three information to make a decision. a) IS_CHECKPOINTED, /* is it checkpointed before? */ b) HAS_FSYNCED_INODE, /* is the inode fsynced before? */ c) HAS_LAST_FSYNC, /* has the latest node fsync mark? */ And, the scenarios for our rule are based on: [Term] F: fsync_mark, D: dentry_mark 1. inode(x) | CP | inode(x) | dnode(F) 2. inode(x) | CP | inode(F) | dnode(F) 3. inode(x) | CP | dnode(F) | inode(x) | inode(F) 4. inode(x) | CP | dnode(F) | inode(F) 5. CP | inode(x) | dnode(F) | inode(DF) 6. CP | inode(DF) | dnode(F) 7. CP | dnode(F) | inode(DF) 8. CP | dnode(F) | inode(x) | inode(DF) For example, #3, the three conditions should be changed as follows. inode(x) | CP | dnode(F) | inode(x) | inode(F) a) x o o o o b) x x x x o c) x o o x o If f2fs_sync_file stops ------^, it should write inode(F) --------------^ So, the need_inode_block_update should return true, since c) get_nat_flag(e, HAS_LAST_FSYNC), is false. For example, #8, CP | alloc | dnode(F) | inode(x) | inode(DF) a) o x x x x b) x x x o c) o o x o If f2fs_sync_file stops -------^, it should write inode(DF) --------------^ Note that, the roll-forward policy should follow this rule, which means, if there are any missing blocks, we doesn't need to recover that inode. Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-09-16 01:50:48 +04:00
if (e) {
if (fsync_done && ni->nid == ni->ino)
set_nat_flag(e, HAS_FSYNCED_INODE, true);
set_nat_flag(e, HAS_LAST_FSYNC, fsync_done);
}
up_write(&nm_i->nat_tree_lock);
}
int try_to_free_nats(struct f2fs_sb_info *sbi, int nr_shrink)
{
struct f2fs_nm_info *nm_i = NM_I(sbi);
int nr = nr_shrink;
if (!down_write_trylock(&nm_i->nat_tree_lock))
return 0;
while (nr_shrink && !list_empty(&nm_i->nat_entries)) {
struct nat_entry *ne;
ne = list_first_entry(&nm_i->nat_entries,
struct nat_entry, list);
__del_from_nat_cache(nm_i, ne);
nr_shrink--;
}
up_write(&nm_i->nat_tree_lock);
return nr - nr_shrink;
}
/*
* This function always returns success
*/
void get_node_info(struct f2fs_sb_info *sbi, nid_t nid, struct node_info *ni)
{
struct f2fs_nm_info *nm_i = NM_I(sbi);
struct curseg_info *curseg = CURSEG_I(sbi, CURSEG_HOT_DATA);
struct f2fs_journal *journal = curseg->journal;
nid_t start_nid = START_NID(nid);
struct f2fs_nat_block *nat_blk;
struct page *page = NULL;
struct f2fs_nat_entry ne;
struct nat_entry *e;
pgoff_t index;
int i;
ni->nid = nid;
/* Check nat cache */
down_read(&nm_i->nat_tree_lock);
e = __lookup_nat_cache(nm_i, nid);
if (e) {
ni->ino = nat_get_ino(e);
ni->blk_addr = nat_get_blkaddr(e);
ni->version = nat_get_version(e);
up_read(&nm_i->nat_tree_lock);
return;
}
memset(&ne, 0, sizeof(struct f2fs_nat_entry));
/* Check current segment summary */
down_read(&curseg->journal_rwsem);
i = lookup_journal_in_cursum(journal, NAT_JOURNAL, nid, 0);
if (i >= 0) {
ne = nat_in_journal(journal, i);
node_info_from_raw_nat(ni, &ne);
}
up_read(&curseg->journal_rwsem);
if (i >= 0) {
up_read(&nm_i->nat_tree_lock);
goto cache;
}
/* Fill node_info from nat page */
index = current_nat_addr(sbi, nid);
up_read(&nm_i->nat_tree_lock);
page = get_meta_page(sbi, index);
nat_blk = (struct f2fs_nat_block *)page_address(page);
ne = nat_blk->entries[nid - start_nid];
node_info_from_raw_nat(ni, &ne);
f2fs_put_page(page, 1);
cache:
/* cache nat entry */
cache_nat_entry(sbi, nid, &ne);
}
/*
* readahead MAX_RA_NODE number of node pages.
*/
static void ra_node_pages(struct page *parent, int start, int n)
{
struct f2fs_sb_info *sbi = F2FS_P_SB(parent);
struct blk_plug plug;
int i, end;
nid_t nid;
blk_start_plug(&plug);
/* Then, try readahead for siblings of the desired node */
end = start + n;
end = min(end, NIDS_PER_BLOCK);
for (i = start; i < end; i++) {
nid = get_nid(parent, i, false);
ra_node_page(sbi, nid);
}
blk_finish_plug(&plug);
}
pgoff_t get_next_page_offset(struct dnode_of_data *dn, pgoff_t pgofs)
{
const long direct_index = ADDRS_PER_INODE(dn->inode);
const long direct_blks = ADDRS_PER_BLOCK;
const long indirect_blks = ADDRS_PER_BLOCK * NIDS_PER_BLOCK;
unsigned int skipped_unit = ADDRS_PER_BLOCK;
int cur_level = dn->cur_level;
int max_level = dn->max_level;
pgoff_t base = 0;
if (!dn->max_level)
return pgofs + 1;
while (max_level-- > cur_level)
skipped_unit *= NIDS_PER_BLOCK;
switch (dn->max_level) {
case 3:
base += 2 * indirect_blks;
case 2:
base += 2 * direct_blks;
case 1:
base += direct_index;
break;
default:
f2fs_bug_on(F2FS_I_SB(dn->inode), 1);
}
return ((pgofs - base) / skipped_unit + 1) * skipped_unit + base;
}
/*
* The maximum depth is four.
* Offset[0] will have raw inode offset.
*/
static int get_node_path(struct inode *inode, long block,
int offset[4], unsigned int noffset[4])
{
const long direct_index = ADDRS_PER_INODE(inode);
const long direct_blks = ADDRS_PER_BLOCK;
const long dptrs_per_blk = NIDS_PER_BLOCK;
const long indirect_blks = ADDRS_PER_BLOCK * NIDS_PER_BLOCK;
const long dindirect_blks = indirect_blks * NIDS_PER_BLOCK;
int n = 0;
int level = 0;
noffset[0] = 0;
if (block < direct_index) {
offset[n] = block;
goto got;
}
block -= direct_index;
if (block < direct_blks) {
offset[n++] = NODE_DIR1_BLOCK;
noffset[n] = 1;
offset[n] = block;
level = 1;
goto got;
}
block -= direct_blks;
if (block < direct_blks) {
offset[n++] = NODE_DIR2_BLOCK;
noffset[n] = 2;
offset[n] = block;
level = 1;
goto got;
}
block -= direct_blks;
if (block < indirect_blks) {
offset[n++] = NODE_IND1_BLOCK;
noffset[n] = 3;
offset[n++] = block / direct_blks;
noffset[n] = 4 + offset[n - 1];
offset[n] = block % direct_blks;
level = 2;
goto got;
}
block -= indirect_blks;
if (block < indirect_blks) {
offset[n++] = NODE_IND2_BLOCK;
noffset[n] = 4 + dptrs_per_blk;
offset[n++] = block / direct_blks;
noffset[n] = 5 + dptrs_per_blk + offset[n - 1];
offset[n] = block % direct_blks;
level = 2;
goto got;
}
block -= indirect_blks;
if (block < dindirect_blks) {
offset[n++] = NODE_DIND_BLOCK;
noffset[n] = 5 + (dptrs_per_blk * 2);
offset[n++] = block / indirect_blks;
noffset[n] = 6 + (dptrs_per_blk * 2) +
offset[n - 1] * (dptrs_per_blk + 1);
offset[n++] = (block / direct_blks) % dptrs_per_blk;
noffset[n] = 7 + (dptrs_per_blk * 2) +
offset[n - 2] * (dptrs_per_blk + 1) +
offset[n - 1];
offset[n] = block % direct_blks;
level = 3;
goto got;
} else {
return -E2BIG;
}
got:
return level;
}
/*
* Caller should call f2fs_put_dnode(dn).
* Also, it should grab and release a rwsem by calling f2fs_lock_op() and
* f2fs_unlock_op() only if ro is not set RDONLY_NODE.
f2fs: introduce a new global lock scheme In the previous version, f2fs uses global locks according to the usage types, such as directory operations, block allocation, block write, and so on. Reference the following lock types in f2fs.h. enum lock_type { RENAME, /* for renaming operations */ DENTRY_OPS, /* for directory operations */ DATA_WRITE, /* for data write */ DATA_NEW, /* for data allocation */ DATA_TRUNC, /* for data truncate */ NODE_NEW, /* for node allocation */ NODE_TRUNC, /* for node truncate */ NODE_WRITE, /* for node write */ NR_LOCK_TYPE, }; In that case, we lose the performance under the multi-threading environment, since every types of operations must be conducted one at a time. In order to address the problem, let's share the locks globally with a mutex array regardless of any types. So, let users grab a mutex and perform their jobs in parallel as much as possbile. For this, I propose a new global lock scheme as follows. 0. Data structure - f2fs_sb_info -> mutex_lock[NR_GLOBAL_LOCKS] - f2fs_sb_info -> node_write 1. mutex_lock_op(sbi) - try to get an avaiable lock from the array. - returns the index of the gottern lock variable. 2. mutex_unlock_op(sbi, index of the lock) - unlock the given index of the lock. 3. mutex_lock_all(sbi) - grab all the locks in the array before the checkpoint. 4. mutex_unlock_all(sbi) - release all the locks in the array after checkpoint. 5. block_operations() - call mutex_lock_all() - sync_dirty_dir_inodes() - grab node_write - sync_node_pages() Note that, the pairs of mutex_lock_op()/mutex_unlock_op() and mutex_lock_all()/mutex_unlock_all() should be used together. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-22 11:21:29 +04:00
* In the case of RDONLY_NODE, we don't need to care about mutex.
*/
int get_dnode_of_data(struct dnode_of_data *dn, pgoff_t index, int mode)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(dn->inode);
struct page *npage[4];
struct page *parent = NULL;
int offset[4];
unsigned int noffset[4];
nid_t nids[4];
int level, i = 0;
int err = 0;
level = get_node_path(dn->inode, index, offset, noffset);
if (level < 0)
return level;
nids[0] = dn->inode->i_ino;
npage[0] = dn->inode_page;
if (!npage[0]) {
npage[0] = get_node_page(sbi, nids[0]);
if (IS_ERR(npage[0]))
return PTR_ERR(npage[0]);
}
/* if inline_data is set, should not report any block indices */
if (f2fs_has_inline_data(dn->inode) && index) {
err = -ENOENT;
f2fs_put_page(npage[0], 1);
goto release_out;
}
parent = npage[0];
if (level != 0)
nids[1] = get_nid(parent, offset[0], true);
dn->inode_page = npage[0];
dn->inode_page_locked = true;
/* get indirect or direct nodes */
for (i = 1; i <= level; i++) {
bool done = false;
if (!nids[i] && mode == ALLOC_NODE) {
/* alloc new node */
if (!alloc_nid(sbi, &(nids[i]))) {
err = -ENOSPC;
goto release_pages;
}
dn->nid = nids[i];
npage[i] = new_node_page(dn, noffset[i]);
if (IS_ERR(npage[i])) {
alloc_nid_failed(sbi, nids[i]);
err = PTR_ERR(npage[i]);
goto release_pages;
}
set_nid(parent, offset[i - 1], nids[i], i == 1);
alloc_nid_done(sbi, nids[i]);
done = true;
} else if (mode == LOOKUP_NODE_RA && i == level && level > 1) {
npage[i] = get_node_page_ra(parent, offset[i - 1]);
if (IS_ERR(npage[i])) {
err = PTR_ERR(npage[i]);
goto release_pages;
}
done = true;
}
if (i == 1) {
dn->inode_page_locked = false;
unlock_page(parent);
} else {
f2fs_put_page(parent, 1);
}
if (!done) {
npage[i] = get_node_page(sbi, nids[i]);
if (IS_ERR(npage[i])) {
err = PTR_ERR(npage[i]);
f2fs_put_page(npage[0], 0);
goto release_out;
}
}
if (i < level) {
parent = npage[i];
nids[i + 1] = get_nid(parent, offset[i], false);
}
}
dn->nid = nids[level];
dn->ofs_in_node = offset[level];
dn->node_page = npage[level];
f2fs: enhance on-disk inode structure scalability This patch add new flag F2FS_EXTRA_ATTR storing in inode.i_inline to indicate that on-disk structure of current inode is extended. In order to extend, we changed the inode structure a bit: Original one: struct f2fs_inode { ... struct f2fs_extent i_ext; __le32 i_addr[DEF_ADDRS_PER_INODE]; __le32 i_nid[DEF_NIDS_PER_INODE]; } Extended one: struct f2fs_inode { ... struct f2fs_extent i_ext; union { struct { __le16 i_extra_isize; __le16 i_padding; __le32 i_extra_end[0]; }; __le32 i_addr[DEF_ADDRS_PER_INODE]; }; __le32 i_nid[DEF_NIDS_PER_INODE]; } Once F2FS_EXTRA_ATTR is set, we will steal four bytes in the head of i_addr field for storing i_extra_isize and i_padding. with i_extra_isize, we can calculate actual size of reserved space in i_addr, available attribute fields included in total extra attribute fields for current inode can be described as below: +--------------------+ | .i_mode | | ... | | .i_ext | +--------------------+ | .i_extra_isize |-----+ | .i_padding | | | .i_prjid | | | .i_atime_extra | | | .i_ctime_extra | | | .i_mtime_extra |<----+ | .i_inode_cs |<----- store blkaddr/inline from here | .i_xattr_cs | | ... | +--------------------+ | | | block address | | | +--------------------+ | .i_nid | +--------------------+ | node_footer | | (nid, ino, offset) | +--------------------+ Hence, with this patch, we would enhance scalability of f2fs inode for storing more newly added attribute. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-07-18 19:19:06 +03:00
dn->data_blkaddr = datablock_addr(dn->inode,
dn->node_page, dn->ofs_in_node);
return 0;
release_pages:
f2fs_put_page(parent, 1);
if (i > 1)
f2fs_put_page(npage[0], 0);
release_out:
dn->inode_page = NULL;
dn->node_page = NULL;
if (err == -ENOENT) {
dn->cur_level = i;
dn->max_level = level;
dn->ofs_in_node = offset[level];
}
return err;
}
static void truncate_node(struct dnode_of_data *dn)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(dn->inode);
struct node_info ni;
get_node_info(sbi, dn->nid, &ni);
/* Deallocate node address */
invalidate_blocks(sbi, ni.blk_addr);
dec_valid_node_count(sbi, dn->inode, dn->nid == dn->inode->i_ino);
set_node_addr(sbi, &ni, NULL_ADDR, false);
if (dn->nid == dn->inode->i_ino) {
remove_orphan_inode(sbi, dn->nid);
dec_valid_inode_count(sbi);
f2fs_inode_synced(dn->inode);
}
clear_node_page_dirty(dn->node_page);
set_sbi_flag(sbi, SBI_IS_DIRTY);
f2fs_put_page(dn->node_page, 1);
invalidate_mapping_pages(NODE_MAPPING(sbi),
dn->node_page->index, dn->node_page->index);
dn->node_page = NULL;
trace_f2fs_truncate_node(dn->inode, dn->nid, ni.blk_addr);
}
static int truncate_dnode(struct dnode_of_data *dn)
{
struct page *page;
if (dn->nid == 0)
return 1;
/* get direct node */
page = get_node_page(F2FS_I_SB(dn->inode), dn->nid);
if (IS_ERR(page) && PTR_ERR(page) == -ENOENT)
return 1;
else if (IS_ERR(page))
return PTR_ERR(page);
/* Make dnode_of_data for parameter */
dn->node_page = page;
dn->ofs_in_node = 0;
truncate_data_blocks(dn);
truncate_node(dn);
return 1;
}
static int truncate_nodes(struct dnode_of_data *dn, unsigned int nofs,
int ofs, int depth)
{
struct dnode_of_data rdn = *dn;
struct page *page;
struct f2fs_node *rn;
nid_t child_nid;
unsigned int child_nofs;
int freed = 0;
int i, ret;
if (dn->nid == 0)
return NIDS_PER_BLOCK + 1;
trace_f2fs_truncate_nodes_enter(dn->inode, dn->nid, dn->data_blkaddr);
page = get_node_page(F2FS_I_SB(dn->inode), dn->nid);
if (IS_ERR(page)) {
trace_f2fs_truncate_nodes_exit(dn->inode, PTR_ERR(page));
return PTR_ERR(page);
}
ra_node_pages(page, ofs, NIDS_PER_BLOCK);
rn = F2FS_NODE(page);
if (depth < 3) {
for (i = ofs; i < NIDS_PER_BLOCK; i++, freed++) {
child_nid = le32_to_cpu(rn->in.nid[i]);
if (child_nid == 0)
continue;
rdn.nid = child_nid;
ret = truncate_dnode(&rdn);
if (ret < 0)
goto out_err;
if (set_nid(page, i, 0, false))
dn->node_changed = true;
}
} else {
child_nofs = nofs + ofs * (NIDS_PER_BLOCK + 1) + 1;
for (i = ofs; i < NIDS_PER_BLOCK; i++) {
child_nid = le32_to_cpu(rn->in.nid[i]);
if (child_nid == 0) {
child_nofs += NIDS_PER_BLOCK + 1;
continue;
}
rdn.nid = child_nid;
ret = truncate_nodes(&rdn, child_nofs, 0, depth - 1);
if (ret == (NIDS_PER_BLOCK + 1)) {
if (set_nid(page, i, 0, false))
dn->node_changed = true;
child_nofs += ret;
} else if (ret < 0 && ret != -ENOENT) {
goto out_err;
}
}
freed = child_nofs;
}
if (!ofs) {
/* remove current indirect node */
dn->node_page = page;
truncate_node(dn);
freed++;
} else {
f2fs_put_page(page, 1);
}
trace_f2fs_truncate_nodes_exit(dn->inode, freed);
return freed;
out_err:
f2fs_put_page(page, 1);
trace_f2fs_truncate_nodes_exit(dn->inode, ret);
return ret;
}
static int truncate_partial_nodes(struct dnode_of_data *dn,
struct f2fs_inode *ri, int *offset, int depth)
{
struct page *pages[2];
nid_t nid[3];
nid_t child_nid;
int err = 0;
int i;
int idx = depth - 2;
nid[0] = le32_to_cpu(ri->i_nid[offset[0] - NODE_DIR1_BLOCK]);
if (!nid[0])
return 0;
/* get indirect nodes in the path */
f2fs: fix truncate_partial_nodes bug The truncate_partial_nodes puts pages incorrectly in the following two cases. Note that the value for argc 'depth' can only be 2 or 3. Please see truncate_inode_blocks() and truncate_partial_nodes(). 1) An err is occurred in the first 'for' loop When err is occurred with depth = 2, pages[0] is invalid, so this page doesn't need to be put. There is no problem, however, when depth is 3, it doesn't put the pages correctly where pages[0] is valid and pages[1] is invalid. In this case, depth is set to 2 (ref to statemnt depth = i + 1), and then 'goto fail'. In label 'fail', for (i = depth - 3; i >= 0; i--) cannot meet the condition because i = -1, so pages[0] cann't be put. 2) An err happened in the second 'for' loop Now we've got pages[0] with depth = 2, or we've got pages[0] and pages[1] with depth = 3. When an err is detected, we need 'goto fail' to put such the pages. When depth is 2, in label 'fail', for (i = depth - 3; i >= 0; i--) cann't meet the condition because i = -1, so pages[0] cann't be put. When depth is 3, in label 'fail', for (i = depth - 3; i >= 0; i--) can only put pages[0], pages[1] also cann't be put. Note that 'depth' has been changed before first 'goto fail' (ref to statemnt depth = i + 1), so passing this modified 'depth' to the tracepoint, trace_f2fs_truncate_partial_nodes, is also incorrect. Signed-off-by: Shifei Ge <shifei10.ge@samsung.com> [Jaegeuk Kim: modify the description and fix one bug] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-10-29 11:32:34 +04:00
for (i = 0; i < idx + 1; i++) {
/* reference count'll be increased */
pages[i] = get_node_page(F2FS_I_SB(dn->inode), nid[i]);
if (IS_ERR(pages[i])) {
err = PTR_ERR(pages[i]);
f2fs: fix truncate_partial_nodes bug The truncate_partial_nodes puts pages incorrectly in the following two cases. Note that the value for argc 'depth' can only be 2 or 3. Please see truncate_inode_blocks() and truncate_partial_nodes(). 1) An err is occurred in the first 'for' loop When err is occurred with depth = 2, pages[0] is invalid, so this page doesn't need to be put. There is no problem, however, when depth is 3, it doesn't put the pages correctly where pages[0] is valid and pages[1] is invalid. In this case, depth is set to 2 (ref to statemnt depth = i + 1), and then 'goto fail'. In label 'fail', for (i = depth - 3; i >= 0; i--) cannot meet the condition because i = -1, so pages[0] cann't be put. 2) An err happened in the second 'for' loop Now we've got pages[0] with depth = 2, or we've got pages[0] and pages[1] with depth = 3. When an err is detected, we need 'goto fail' to put such the pages. When depth is 2, in label 'fail', for (i = depth - 3; i >= 0; i--) cann't meet the condition because i = -1, so pages[0] cann't be put. When depth is 3, in label 'fail', for (i = depth - 3; i >= 0; i--) can only put pages[0], pages[1] also cann't be put. Note that 'depth' has been changed before first 'goto fail' (ref to statemnt depth = i + 1), so passing this modified 'depth' to the tracepoint, trace_f2fs_truncate_partial_nodes, is also incorrect. Signed-off-by: Shifei Ge <shifei10.ge@samsung.com> [Jaegeuk Kim: modify the description and fix one bug] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-10-29 11:32:34 +04:00
idx = i - 1;
goto fail;
}
nid[i + 1] = get_nid(pages[i], offset[i + 1], false);
}
ra_node_pages(pages[idx], offset[idx + 1], NIDS_PER_BLOCK);
/* free direct nodes linked to a partial indirect node */
f2fs: fix truncate_partial_nodes bug The truncate_partial_nodes puts pages incorrectly in the following two cases. Note that the value for argc 'depth' can only be 2 or 3. Please see truncate_inode_blocks() and truncate_partial_nodes(). 1) An err is occurred in the first 'for' loop When err is occurred with depth = 2, pages[0] is invalid, so this page doesn't need to be put. There is no problem, however, when depth is 3, it doesn't put the pages correctly where pages[0] is valid and pages[1] is invalid. In this case, depth is set to 2 (ref to statemnt depth = i + 1), and then 'goto fail'. In label 'fail', for (i = depth - 3; i >= 0; i--) cannot meet the condition because i = -1, so pages[0] cann't be put. 2) An err happened in the second 'for' loop Now we've got pages[0] with depth = 2, or we've got pages[0] and pages[1] with depth = 3. When an err is detected, we need 'goto fail' to put such the pages. When depth is 2, in label 'fail', for (i = depth - 3; i >= 0; i--) cann't meet the condition because i = -1, so pages[0] cann't be put. When depth is 3, in label 'fail', for (i = depth - 3; i >= 0; i--) can only put pages[0], pages[1] also cann't be put. Note that 'depth' has been changed before first 'goto fail' (ref to statemnt depth = i + 1), so passing this modified 'depth' to the tracepoint, trace_f2fs_truncate_partial_nodes, is also incorrect. Signed-off-by: Shifei Ge <shifei10.ge@samsung.com> [Jaegeuk Kim: modify the description and fix one bug] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-10-29 11:32:34 +04:00
for (i = offset[idx + 1]; i < NIDS_PER_BLOCK; i++) {
child_nid = get_nid(pages[idx], i, false);
if (!child_nid)
continue;
dn->nid = child_nid;
err = truncate_dnode(dn);
if (err < 0)
goto fail;
if (set_nid(pages[idx], i, 0, false))
dn->node_changed = true;
}
f2fs: fix truncate_partial_nodes bug The truncate_partial_nodes puts pages incorrectly in the following two cases. Note that the value for argc 'depth' can only be 2 or 3. Please see truncate_inode_blocks() and truncate_partial_nodes(). 1) An err is occurred in the first 'for' loop When err is occurred with depth = 2, pages[0] is invalid, so this page doesn't need to be put. There is no problem, however, when depth is 3, it doesn't put the pages correctly where pages[0] is valid and pages[1] is invalid. In this case, depth is set to 2 (ref to statemnt depth = i + 1), and then 'goto fail'. In label 'fail', for (i = depth - 3; i >= 0; i--) cannot meet the condition because i = -1, so pages[0] cann't be put. 2) An err happened in the second 'for' loop Now we've got pages[0] with depth = 2, or we've got pages[0] and pages[1] with depth = 3. When an err is detected, we need 'goto fail' to put such the pages. When depth is 2, in label 'fail', for (i = depth - 3; i >= 0; i--) cann't meet the condition because i = -1, so pages[0] cann't be put. When depth is 3, in label 'fail', for (i = depth - 3; i >= 0; i--) can only put pages[0], pages[1] also cann't be put. Note that 'depth' has been changed before first 'goto fail' (ref to statemnt depth = i + 1), so passing this modified 'depth' to the tracepoint, trace_f2fs_truncate_partial_nodes, is also incorrect. Signed-off-by: Shifei Ge <shifei10.ge@samsung.com> [Jaegeuk Kim: modify the description and fix one bug] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-10-29 11:32:34 +04:00
if (offset[idx + 1] == 0) {
dn->node_page = pages[idx];
dn->nid = nid[idx];
truncate_node(dn);
} else {
f2fs_put_page(pages[idx], 1);
}
offset[idx]++;
f2fs: fix truncate_partial_nodes bug The truncate_partial_nodes puts pages incorrectly in the following two cases. Note that the value for argc 'depth' can only be 2 or 3. Please see truncate_inode_blocks() and truncate_partial_nodes(). 1) An err is occurred in the first 'for' loop When err is occurred with depth = 2, pages[0] is invalid, so this page doesn't need to be put. There is no problem, however, when depth is 3, it doesn't put the pages correctly where pages[0] is valid and pages[1] is invalid. In this case, depth is set to 2 (ref to statemnt depth = i + 1), and then 'goto fail'. In label 'fail', for (i = depth - 3; i >= 0; i--) cannot meet the condition because i = -1, so pages[0] cann't be put. 2) An err happened in the second 'for' loop Now we've got pages[0] with depth = 2, or we've got pages[0] and pages[1] with depth = 3. When an err is detected, we need 'goto fail' to put such the pages. When depth is 2, in label 'fail', for (i = depth - 3; i >= 0; i--) cann't meet the condition because i = -1, so pages[0] cann't be put. When depth is 3, in label 'fail', for (i = depth - 3; i >= 0; i--) can only put pages[0], pages[1] also cann't be put. Note that 'depth' has been changed before first 'goto fail' (ref to statemnt depth = i + 1), so passing this modified 'depth' to the tracepoint, trace_f2fs_truncate_partial_nodes, is also incorrect. Signed-off-by: Shifei Ge <shifei10.ge@samsung.com> [Jaegeuk Kim: modify the description and fix one bug] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-10-29 11:32:34 +04:00
offset[idx + 1] = 0;
idx--;
fail:
f2fs: fix truncate_partial_nodes bug The truncate_partial_nodes puts pages incorrectly in the following two cases. Note that the value for argc 'depth' can only be 2 or 3. Please see truncate_inode_blocks() and truncate_partial_nodes(). 1) An err is occurred in the first 'for' loop When err is occurred with depth = 2, pages[0] is invalid, so this page doesn't need to be put. There is no problem, however, when depth is 3, it doesn't put the pages correctly where pages[0] is valid and pages[1] is invalid. In this case, depth is set to 2 (ref to statemnt depth = i + 1), and then 'goto fail'. In label 'fail', for (i = depth - 3; i >= 0; i--) cannot meet the condition because i = -1, so pages[0] cann't be put. 2) An err happened in the second 'for' loop Now we've got pages[0] with depth = 2, or we've got pages[0] and pages[1] with depth = 3. When an err is detected, we need 'goto fail' to put such the pages. When depth is 2, in label 'fail', for (i = depth - 3; i >= 0; i--) cann't meet the condition because i = -1, so pages[0] cann't be put. When depth is 3, in label 'fail', for (i = depth - 3; i >= 0; i--) can only put pages[0], pages[1] also cann't be put. Note that 'depth' has been changed before first 'goto fail' (ref to statemnt depth = i + 1), so passing this modified 'depth' to the tracepoint, trace_f2fs_truncate_partial_nodes, is also incorrect. Signed-off-by: Shifei Ge <shifei10.ge@samsung.com> [Jaegeuk Kim: modify the description and fix one bug] Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-10-29 11:32:34 +04:00
for (i = idx; i >= 0; i--)
f2fs_put_page(pages[i], 1);
trace_f2fs_truncate_partial_nodes(dn->inode, nid, depth, err);
return err;
}
/*
* All the block addresses of data and nodes should be nullified.
*/
int truncate_inode_blocks(struct inode *inode, pgoff_t from)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
int err = 0, cont = 1;
int level, offset[4], noffset[4];
unsigned int nofs = 0;
struct f2fs_inode *ri;
struct dnode_of_data dn;
struct page *page;
trace_f2fs_truncate_inode_blocks_enter(inode, from);
level = get_node_path(inode, from, offset, noffset);
if (level < 0)
return level;
page = get_node_page(sbi, inode->i_ino);
if (IS_ERR(page)) {
trace_f2fs_truncate_inode_blocks_exit(inode, PTR_ERR(page));
return PTR_ERR(page);
}
set_new_dnode(&dn, inode, page, NULL, 0);
unlock_page(page);
ri = F2FS_INODE(page);
switch (level) {
case 0:
case 1:
nofs = noffset[1];
break;
case 2:
nofs = noffset[1];
if (!offset[level - 1])
goto skip_partial;
err = truncate_partial_nodes(&dn, ri, offset, level);
if (err < 0 && err != -ENOENT)
goto fail;
nofs += 1 + NIDS_PER_BLOCK;
break;
case 3:
nofs = 5 + 2 * NIDS_PER_BLOCK;
if (!offset[level - 1])
goto skip_partial;
err = truncate_partial_nodes(&dn, ri, offset, level);
if (err < 0 && err != -ENOENT)
goto fail;
break;
default:
BUG();
}
skip_partial:
while (cont) {
dn.nid = le32_to_cpu(ri->i_nid[offset[0] - NODE_DIR1_BLOCK]);
switch (offset[0]) {
case NODE_DIR1_BLOCK:
case NODE_DIR2_BLOCK:
err = truncate_dnode(&dn);
break;
case NODE_IND1_BLOCK:
case NODE_IND2_BLOCK:
err = truncate_nodes(&dn, nofs, offset[1], 2);
break;
case NODE_DIND_BLOCK:
err = truncate_nodes(&dn, nofs, offset[1], 3);
cont = 0;
break;
default:
BUG();
}
if (err < 0 && err != -ENOENT)
goto fail;
if (offset[1] == 0 &&
ri->i_nid[offset[0] - NODE_DIR1_BLOCK]) {
lock_page(page);
BUG_ON(page->mapping != NODE_MAPPING(sbi));
f2fs_wait_on_page_writeback(page, NODE, true);
ri->i_nid[offset[0] - NODE_DIR1_BLOCK] = 0;
set_page_dirty(page);
unlock_page(page);
}
offset[1] = 0;
offset[0]++;
nofs += err;
}
fail:
f2fs_put_page(page, 0);
trace_f2fs_truncate_inode_blocks_exit(inode, err);
return err > 0 ? 0 : err;
}
/* caller must lock inode page */
int truncate_xattr_node(struct inode *inode)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
nid_t nid = F2FS_I(inode)->i_xattr_nid;
struct dnode_of_data dn;
struct page *npage;
if (!nid)
return 0;
npage = get_node_page(sbi, nid);
if (IS_ERR(npage))
return PTR_ERR(npage);
f2fs_i_xnid_write(inode, 0);
set_new_dnode(&dn, inode, NULL, npage, nid);
truncate_node(&dn);
return 0;
}
f2fs: introduce a new global lock scheme In the previous version, f2fs uses global locks according to the usage types, such as directory operations, block allocation, block write, and so on. Reference the following lock types in f2fs.h. enum lock_type { RENAME, /* for renaming operations */ DENTRY_OPS, /* for directory operations */ DATA_WRITE, /* for data write */ DATA_NEW, /* for data allocation */ DATA_TRUNC, /* for data truncate */ NODE_NEW, /* for node allocation */ NODE_TRUNC, /* for node truncate */ NODE_WRITE, /* for node write */ NR_LOCK_TYPE, }; In that case, we lose the performance under the multi-threading environment, since every types of operations must be conducted one at a time. In order to address the problem, let's share the locks globally with a mutex array regardless of any types. So, let users grab a mutex and perform their jobs in parallel as much as possbile. For this, I propose a new global lock scheme as follows. 0. Data structure - f2fs_sb_info -> mutex_lock[NR_GLOBAL_LOCKS] - f2fs_sb_info -> node_write 1. mutex_lock_op(sbi) - try to get an avaiable lock from the array. - returns the index of the gottern lock variable. 2. mutex_unlock_op(sbi, index of the lock) - unlock the given index of the lock. 3. mutex_lock_all(sbi) - grab all the locks in the array before the checkpoint. 4. mutex_unlock_all(sbi) - release all the locks in the array after checkpoint. 5. block_operations() - call mutex_lock_all() - sync_dirty_dir_inodes() - grab node_write - sync_node_pages() Note that, the pairs of mutex_lock_op()/mutex_unlock_op() and mutex_lock_all()/mutex_unlock_all() should be used together. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-22 11:21:29 +04:00
/*
* Caller should grab and release a rwsem by calling f2fs_lock_op() and
* f2fs_unlock_op().
f2fs: introduce a new global lock scheme In the previous version, f2fs uses global locks according to the usage types, such as directory operations, block allocation, block write, and so on. Reference the following lock types in f2fs.h. enum lock_type { RENAME, /* for renaming operations */ DENTRY_OPS, /* for directory operations */ DATA_WRITE, /* for data write */ DATA_NEW, /* for data allocation */ DATA_TRUNC, /* for data truncate */ NODE_NEW, /* for node allocation */ NODE_TRUNC, /* for node truncate */ NODE_WRITE, /* for node write */ NR_LOCK_TYPE, }; In that case, we lose the performance under the multi-threading environment, since every types of operations must be conducted one at a time. In order to address the problem, let's share the locks globally with a mutex array regardless of any types. So, let users grab a mutex and perform their jobs in parallel as much as possbile. For this, I propose a new global lock scheme as follows. 0. Data structure - f2fs_sb_info -> mutex_lock[NR_GLOBAL_LOCKS] - f2fs_sb_info -> node_write 1. mutex_lock_op(sbi) - try to get an avaiable lock from the array. - returns the index of the gottern lock variable. 2. mutex_unlock_op(sbi, index of the lock) - unlock the given index of the lock. 3. mutex_lock_all(sbi) - grab all the locks in the array before the checkpoint. 4. mutex_unlock_all(sbi) - release all the locks in the array after checkpoint. 5. block_operations() - call mutex_lock_all() - sync_dirty_dir_inodes() - grab node_write - sync_node_pages() Note that, the pairs of mutex_lock_op()/mutex_unlock_op() and mutex_lock_all()/mutex_unlock_all() should be used together. Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2012-11-22 11:21:29 +04:00
*/
int remove_inode_page(struct inode *inode)
{
struct dnode_of_data dn;
int err;
set_new_dnode(&dn, inode, NULL, NULL, inode->i_ino);
err = get_dnode_of_data(&dn, 0, LOOKUP_NODE);
if (err)
return err;
err = truncate_xattr_node(inode);
if (err) {
f2fs_put_dnode(&dn);
return err;
}
/* remove potential inline_data blocks */
if (S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode) ||
S_ISLNK(inode->i_mode))
truncate_data_blocks_range(&dn, 1);
/* 0 is possible, after f2fs_new_inode() has failed */
f2fs_bug_on(F2FS_I_SB(inode),
inode->i_blocks != 0 && inode->i_blocks != 8);
/* will put inode & node pages */
truncate_node(&dn);
return 0;
}
struct page *new_inode_page(struct inode *inode)
{
struct dnode_of_data dn;
/* allocate inode page for new inode */
set_new_dnode(&dn, inode, NULL, NULL, inode->i_ino);
/* caller should f2fs_put_page(page, 1); */
return new_node_page(&dn, 0);
}
struct page *new_node_page(struct dnode_of_data *dn, unsigned int ofs)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(dn->inode);
struct node_info new_ni;
struct page *page;
int err;
if (unlikely(is_inode_flag_set(dn->inode, FI_NO_ALLOC)))
return ERR_PTR(-EPERM);
page = f2fs_grab_cache_page(NODE_MAPPING(sbi), dn->nid, false);
if (!page)
return ERR_PTR(-ENOMEM);
if (unlikely((err = inc_valid_node_count(sbi, dn->inode, !ofs))))
goto fail;
#ifdef CONFIG_F2FS_CHECK_FS
get_node_info(sbi, dn->nid, &new_ni);
f2fs_bug_on(sbi, new_ni.blk_addr != NULL_ADDR);
#endif
new_ni.nid = dn->nid;
new_ni.ino = dn->inode->i_ino;
new_ni.blk_addr = NULL_ADDR;
new_ni.flag = 0;
new_ni.version = 0;
set_node_addr(sbi, &new_ni, NEW_ADDR, false);
f2fs_wait_on_page_writeback(page, NODE, true);
fill_node_footer(page, dn->nid, dn->inode->i_ino, ofs, true);
set_cold_node(page, S_ISDIR(dn->inode->i_mode));
if (!PageUptodate(page))
SetPageUptodate(page);
if (set_page_dirty(page))
dn->node_changed = true;
if (f2fs_has_xattr_block(ofs))
f2fs_i_xnid_write(dn->inode, dn->nid);
if (ofs == 0)
inc_valid_inode_count(sbi);
return page;
fail:
clear_node_page_dirty(page);
f2fs_put_page(page, 1);
return ERR_PTR(err);
}
/*
* Caller should do after getting the following values.
* 0: f2fs_put_page(page, 0)
* LOCKED_PAGE or error: f2fs_put_page(page, 1)
*/
static int read_node_page(struct page *page, int op_flags)
{
struct f2fs_sb_info *sbi = F2FS_P_SB(page);
struct node_info ni;
struct f2fs_io_info fio = {
.sbi = sbi,
.type = NODE,
.op = REQ_OP_READ,
.op_flags = op_flags,
.page = page,
.encrypted_page = NULL,
};
if (PageUptodate(page))
return LOCKED_PAGE;
get_node_info(sbi, page->index, &ni);
if (unlikely(ni.blk_addr == NULL_ADDR)) {
ClearPageUptodate(page);
return -ENOENT;
}
fio.new_blkaddr = fio.old_blkaddr = ni.blk_addr;
return f2fs_submit_page_bio(&fio);
}
/*
* Readahead a node page
*/
void ra_node_page(struct f2fs_sb_info *sbi, nid_t nid)
{
struct page *apage;
int err;
if (!nid)
return;
f2fs_bug_on(sbi, check_nid_range(sbi, nid));
rcu_read_lock();
apage = radix_tree_lookup(&NODE_MAPPING(sbi)->page_tree, nid);
rcu_read_unlock();
if (apage)
return;
apage = f2fs_grab_cache_page(NODE_MAPPING(sbi), nid, false);
if (!apage)
return;
err = read_node_page(apage, REQ_RAHEAD);
f2fs_put_page(apage, err ? 1 : 0);
}
static struct page *__get_node_page(struct f2fs_sb_info *sbi, pgoff_t nid,
struct page *parent, int start)
{
struct page *page;
int err;
if (!nid)
return ERR_PTR(-ENOENT);
f2fs_bug_on(sbi, check_nid_range(sbi, nid));
repeat:
page = f2fs_grab_cache_page(NODE_MAPPING(sbi), nid, false);
if (!page)
return ERR_PTR(-ENOMEM);
err = read_node_page(page, 0);
if (err < 0) {
f2fs_put_page(page, 1);
return ERR_PTR(err);
} else if (err == LOCKED_PAGE) {
err = 0;
goto page_hit;
}
if (parent)
ra_node_pages(parent, start + 1, MAX_RA_NODE);
f2fs: give a chance to merge IOs by IO scheduler Previously, background GC submits many 4KB read requests to load victim blocks and/or its (i)node blocks. ... f2fs_gc : f2fs_readpage: ino = 1, page_index = 0xb61, blkaddr = 0x3b964ed f2fs_gc : block_rq_complete: 8,16 R () 499854968 + 8 [0] f2fs_gc : f2fs_readpage: ino = 1, page_index = 0xb6f, blkaddr = 0x3b964ee f2fs_gc : block_rq_complete: 8,16 R () 499854976 + 8 [0] f2fs_gc : f2fs_readpage: ino = 1, page_index = 0xb79, blkaddr = 0x3b964ef f2fs_gc : block_rq_complete: 8,16 R () 499854984 + 8 [0] ... However, by the fact that many IOs are sequential, we can give a chance to merge the IOs by IO scheduler. In order to do that, let's use blk_plug. ... f2fs_gc : f2fs_iget: ino = 143 f2fs_gc : f2fs_readpage: ino = 143, page_index = 0x1c6, blkaddr = 0x2e6ee f2fs_gc : f2fs_iget: ino = 143 f2fs_gc : f2fs_readpage: ino = 143, page_index = 0x1c7, blkaddr = 0x2e6ef <idle> : block_rq_complete: 8,16 R () 1519616 + 8 [0] <idle> : block_rq_complete: 8,16 R () 1519848 + 8 [0] <idle> : block_rq_complete: 8,16 R () 1520432 + 96 [0] <idle> : block_rq_complete: 8,16 R () 1520536 + 104 [0] <idle> : block_rq_complete: 8,16 R () 1521008 + 112 [0] <idle> : block_rq_complete: 8,16 R () 1521440 + 152 [0] <idle> : block_rq_complete: 8,16 R () 1521688 + 144 [0] <idle> : block_rq_complete: 8,16 R () 1522128 + 192 [0] <idle> : block_rq_complete: 8,16 R () 1523256 + 328 [0] ... Note that this issue should be addressed in checkpoint, and some readahead flows too. Reviewed-by: Namjae Jeon <namjae.jeon@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
2013-04-24 08:19:56 +04:00
lock_page(page);
if (unlikely(page->mapping != NODE_MAPPING(sbi))) {
f2fs_put_page(page, 1);
goto repeat;
}
if (unlikely(!PageUptodate(page))) {
err = -EIO;
goto out_err;
}
if (!f2fs_inode_chksum_verify(sbi, page)) {
err = -EBADMSG;
goto out_err;
}
page_hit:
if(unlikely(nid != nid_of_node(page))) {
f2fs_msg(sbi->sb, KERN_WARNING, "inconsistent node block, "
"nid:%lu, node_footer[nid:%u,ino:%u,ofs:%u,cpver:%llu,blkaddr:%u]",
nid, nid_of_node(page), ino_of_node(page),
ofs_of_node(page), cpver_of_node(page),
next_blkaddr_of_node(page));
err = -EINVAL;
out_err:
ClearPageUptodate(page);
f2fs_put_page(page, 1);
return ERR_PTR(err);
}
return page;
}
struct page *get_node_page(struct f2fs_sb_info *sbi, pgoff_t nid)
{
return __get_node_page(sbi, nid, NULL, 0);
}
struct page *get_node_page_ra(struct page *parent, int start)
{
struct f2fs_sb_info *sbi = F2FS_P_SB(parent);
nid_t nid = get_nid(parent, start, false);
return __get_node_page(sbi, nid, parent, start);
}
static void flush_inline_data(struct f2fs_sb_info *sbi, nid_t ino)
{
struct inode *inode;
struct page *page;
f2fs: fix to update dirty page count correctly Once we failed to merge inline data into inode page during flushing inline inode, we will skip invoking inode_dec_dirty_pages, which makes dirty page count incorrect, result in panic in ->evict_inode, Fix it. ------------[ cut here ]------------ kernel BUG at /home/yuchao/git/devf2fs/inode.c:336! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 3 PID: 10004 Comm: umount Tainted: G O 4.6.0-rc5+ #17 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 task: f0c33000 ti: c5212000 task.ti: c5212000 EIP: 0060:[<f89aacb5>] EFLAGS: 00010202 CPU: 3 EIP is at f2fs_evict_inode+0x85/0x490 [f2fs] EAX: 00000001 EBX: c4529ea0 ECX: 00000001 EDX: 00000000 ESI: c0131000 EDI: f89dd0a0 EBP: c5213e9c ESP: c5213e78 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 CR0: 80050033 CR2: b75878c0 CR3: 1a36a700 CR4: 000406f0 Stack: c4529ea0 c4529ef4 c5213e8c c176d45c c4529ef4 00000000 c4529ea0 c4529fac f89dd0a0 c5213eb0 c1204a68 c5213ed8 c452a2b4 c6680930 c5213ec0 c1204b64 c6680d44 c6680620 c5213eec c120588d ee84b000 ee84b5c0 c5214000 ee84b5e0 Call Trace: [<c176d45c>] ? _raw_spin_unlock+0x2c/0x50 [<c1204a68>] evict+0xa8/0x170 [<c1204b64>] dispose_list+0x34/0x50 [<c120588d>] evict_inodes+0x10d/0x130 [<c11ea941>] generic_shutdown_super+0x41/0xe0 [<c1185190>] ? unregister_shrinker+0x40/0x50 [<c1185190>] ? unregister_shrinker+0x40/0x50 [<c11eac52>] kill_block_super+0x22/0x70 [<f89af23e>] kill_f2fs_super+0x1e/0x20 [f2fs] [<c11eae1d>] deactivate_locked_super+0x3d/0x70 [<c11eb383>] deactivate_super+0x43/0x60 [<c1208ec9>] cleanup_mnt+0x39/0x80 [<c1208f50>] __cleanup_mnt+0x10/0x20 [<c107d091>] task_work_run+0x71/0x90 [<c105725a>] exit_to_usermode_loop+0x72/0x9e [<c1001c7c>] do_fast_syscall_32+0x19c/0x1c0 [<c176dd48>] sysenter_past_esp+0x45/0x74 EIP: [<f89aacb5>] f2fs_evict_inode+0x85/0x490 [f2fs] SS:ESP 0068:c5213e78 ---[ end trace d30536330b7fdc58 ]--- Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-05-20 19:11:09 +03:00
int ret;
/* should flush inline_data before evict_inode */
inode = ilookup(sbi->sb, ino);
if (!inode)
return;
page = f2fs_pagecache_get_page(inode->i_mapping, 0,
FGP_LOCK|FGP_NOWAIT, 0);
if (!page)
goto iput_out;
if (!PageUptodate(page))
goto page_out;
if (!PageDirty(page))
goto page_out;
if (!clear_page_dirty_for_io(page))
goto page_out;
f2fs: fix to update dirty page count correctly Once we failed to merge inline data into inode page during flushing inline inode, we will skip invoking inode_dec_dirty_pages, which makes dirty page count incorrect, result in panic in ->evict_inode, Fix it. ------------[ cut here ]------------ kernel BUG at /home/yuchao/git/devf2fs/inode.c:336! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 3 PID: 10004 Comm: umount Tainted: G O 4.6.0-rc5+ #17 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 task: f0c33000 ti: c5212000 task.ti: c5212000 EIP: 0060:[<f89aacb5>] EFLAGS: 00010202 CPU: 3 EIP is at f2fs_evict_inode+0x85/0x490 [f2fs] EAX: 00000001 EBX: c4529ea0 ECX: 00000001 EDX: 00000000 ESI: c0131000 EDI: f89dd0a0 EBP: c5213e9c ESP: c5213e78 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 CR0: 80050033 CR2: b75878c0 CR3: 1a36a700 CR4: 000406f0 Stack: c4529ea0 c4529ef4 c5213e8c c176d45c c4529ef4 00000000 c4529ea0 c4529fac f89dd0a0 c5213eb0 c1204a68 c5213ed8 c452a2b4 c6680930 c5213ec0 c1204b64 c6680d44 c6680620 c5213eec c120588d ee84b000 ee84b5c0 c5214000 ee84b5e0 Call Trace: [<c176d45c>] ? _raw_spin_unlock+0x2c/0x50 [<c1204a68>] evict+0xa8/0x170 [<c1204b64>] dispose_list+0x34/0x50 [<c120588d>] evict_inodes+0x10d/0x130 [<c11ea941>] generic_shutdown_super+0x41/0xe0 [<c1185190>] ? unregister_shrinker+0x40/0x50 [<c1185190>] ? unregister_shrinker+0x40/0x50 [<c11eac52>] kill_block_super+0x22/0x70 [<f89af23e>] kill_f2fs_super+0x1e/0x20 [f2fs] [<c11eae1d>] deactivate_locked_super+0x3d/0x70 [<c11eb383>] deactivate_super+0x43/0x60 [<c1208ec9>] cleanup_mnt+0x39/0x80 [<c1208f50>] __cleanup_mnt+0x10/0x20 [<c107d091>] task_work_run+0x71/0x90 [<c105725a>] exit_to_usermode_loop+0x72/0x9e [<c1001c7c>] do_fast_syscall_32+0x19c/0x1c0 [<c176dd48>] sysenter_past_esp+0x45/0x74 EIP: [<f89aacb5>] f2fs_evict_inode+0x85/0x490 [f2fs] SS:ESP 0068:c5213e78 ---[ end trace d30536330b7fdc58 ]--- Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-05-20 19:11:09 +03:00
ret = f2fs_write_inline_data(inode, page);
inode_dec_dirty_pages(inode);
remove_dirty_inode(inode);
f2fs: fix to update dirty page count correctly Once we failed to merge inline data into inode page during flushing inline inode, we will skip invoking inode_dec_dirty_pages, which makes dirty page count incorrect, result in panic in ->evict_inode, Fix it. ------------[ cut here ]------------ kernel BUG at /home/yuchao/git/devf2fs/inode.c:336! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 3 PID: 10004 Comm: umount Tainted: G O 4.6.0-rc5+ #17 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 task: f0c33000 ti: c5212000 task.ti: c5212000 EIP: 0060:[<f89aacb5>] EFLAGS: 00010202 CPU: 3 EIP is at f2fs_evict_inode+0x85/0x490 [f2fs] EAX: 00000001 EBX: c4529ea0 ECX: 00000001 EDX: 00000000 ESI: c0131000 EDI: f89dd0a0 EBP: c5213e9c ESP: c5213e78 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 CR0: 80050033 CR2: b75878c0 CR3: 1a36a700 CR4: 000406f0 Stack: c4529ea0 c4529ef4 c5213e8c c176d45c c4529ef4 00000000 c4529ea0 c4529fac f89dd0a0 c5213eb0 c1204a68 c5213ed8 c452a2b4 c6680930 c5213ec0 c1204b64 c6680d44 c6680620 c5213eec c120588d ee84b000 ee84b5c0 c5214000 ee84b5e0 Call Trace: [<c176d45c>] ? _raw_spin_unlock+0x2c/0x50 [<c1204a68>] evict+0xa8/0x170 [<c1204b64>] dispose_list+0x34/0x50 [<c120588d>] evict_inodes+0x10d/0x130 [<c11ea941>] generic_shutdown_super+0x41/0xe0 [<c1185190>] ? unregister_shrinker+0x40/0x50 [<c1185190>] ? unregister_shrinker+0x40/0x50 [<c11eac52>] kill_block_super+0x22/0x70 [<f89af23e>] kill_f2fs_super+0x1e/0x20 [f2fs] [<c11eae1d>] deactivate_locked_super+0x3d/0x70 [<c11eb383>] deactivate_super+0x43/0x60 [<c1208ec9>] cleanup_mnt+0x39/0x80 [<c1208f50>] __cleanup_mnt+0x10/0x20 [<c107d091>] task_work_run+0x71/0x90 [<c105725a>] exit_to_usermode_loop+0x72/0x9e [<c1001c7c>] do_fast_syscall_32+0x19c/0x1c0 [<c176dd48>] sysenter_past_esp+0x45/0x74 EIP: [<f89aacb5>] f2fs_evict_inode+0x85/0x490 [f2fs] SS:ESP 0068:c5213e78 ---[ end trace d30536330b7fdc58 ]--- Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2016-05-20 19:11:09 +03:00
if (ret)
set_page_dirty(page);
page_out:
f2fs_put_page(page, 1);
iput_out:
iput(inode);
}
static struct page *last_fsync_dnode(struct f2fs_sb_info *sbi, nid_t ino)
{
pgoff_t index;
struct pagevec pvec;
struct page *last_page = NULL;
int nr_pages;
pagevec_init(&pvec);
index = 0;
while ((nr_pages = pagevec_lookup_tag(&pvec, NODE_MAPPING(sbi), &index,
PAGECACHE_TAG_DIRTY))) {
int i;
for (i = 0; i < nr_pages; i++) {
struct page *page = pvec.pages[i];
if (unlikely(f2fs_cp_error(sbi))) {
f2fs_put_page(last_page, 0);
pagevec_release(&pvec);
return ERR_PTR(-EIO);
}
if (!IS_DNODE(page) || !is_cold_node(page))
continue;
if (ino_of_node(page) != ino)
continue;
lock_page(page);
if (unlikely(page->mapping != NODE_MAPPING(sbi))) {
continue_unlock:
unlock_page(page);
continue;
}
if (ino_of_node(page) != ino)
goto continue_unlock;
if (!PageDirty(page)) {
/* someone wrote it for us */
goto continue_unlock;
}
if (last_page)
f2fs_put_page(last_page, 0);
get_page(page);
last_page = page;
unlock_page(page);
}
pagevec_release(&pvec);
cond_resched();
}
return last_page;
}
static int __write_node_page(struct page *page, bool atomic, bool *submitted,
struct writeback_control *wbc, bool do_balance,
enum iostat_type io_type)
{
struct f2fs_sb_info *sbi = F2FS_P_SB(page);
nid_t nid;
struct node_info ni;
struct f2fs_io_info fio = {
.sbi = sbi,
.ino = ino_of_node(page),
.type = NODE,
.op = REQ_OP_WRITE,
.op_flags = wbc_to_write_flags(wbc),
.page = page,
.encrypted_page = NULL,
.submitted = false,
.io_type = io_type,
.io_wbc = wbc,
};
trace_f2fs_writepage(page, NODE);
if (unlikely(f2fs_cp_error(sbi))) {
dec_page_count(sbi, F2FS_DIRTY_NODES);
unlock_page(page);
return 0;
}
if (unlikely(is_sbi_flag_set(sbi, SBI_POR_DOING)))
goto redirty_out;
/* get old block addr of this node page */
nid = nid_of_node(page);
f2fs_bug_on(sbi, page->index != nid);
if (wbc->for_reclaim) {
if (!down_read_trylock(&sbi->node_write))
goto redirty_out;
} else {
down_read(&sbi->node_write);
}
get_node_info(sbi, nid, &ni);
/* This page is already truncated */
if (unlikely(ni.blk_addr == NULL_ADDR)) {
ClearPageUptodate(page);
dec_page_count(sbi, F2FS_DIRTY_NODES);
up_read(&sbi->node_write);
unlock_page(page);
return 0;
}
if (atomic && !test_opt(sbi, NOBARRIER))
fio.op_flags |= REQ_PREFLUSH | REQ_FUA;
set_page_writeback(page);
fio.old_blkaddr = ni.blk_addr;
write_node_page(nid, &fio);
set_node_addr(sbi, &ni, fio.new_blkaddr, is_fsync_dnode(page));
dec_page_count(sbi, F2FS_DIRTY_NODES);
up_read(&sbi->node_write);
if (wbc->for_reclaim) {
f2fs_submit_merged_write_cond(sbi, page->mapping->host, 0,
page->index, NODE);
submitted = NULL;
}
unlock_page(page);
if (unlikely(f2fs_cp_error(sbi))) {
f2fs_submit_merged_write(sbi, NODE);
submitted = NULL;
}
if (submitted)
*submitted = fio.submitted;
if (do_balance)
f2fs_balance_fs(sbi, false);
return 0;
redirty_out:
redirty_page_for_writepage(wbc, page);
return AOP_WRITEPAGE_ACTIVATE;
}
void move_node_page(struct page *node_page, int gc_type)
{
if (gc_type == FG_GC) {
struct writeback_control wbc = {
.sync_mode = WB_SYNC_ALL,
.nr_to_write = 1,
.for_reclaim = 0,
};
set_page_dirty(node_page);
f2fs_wait_on_page_writeback(node_page, NODE, true);
f2fs_bug_on(F2FS_P_SB(node_page), PageWriteback(node_page));
if (!clear_page_dirty_for_io(node_page))
goto out_page;
if (__write_node_page(node_page, false, NULL,
&wbc, false, FS_GC_NODE_IO))
unlock_page(node_page);
goto release_page;
} else {
/* set page dirty and write it */
if (!PageWriteback(node_page))
set_page_dirty(node_page);
}
out_page:
unlock_page(node_page);
release_page:
f2fs_put_page(node_page, 0);
}
static int f2fs_write_node_page(struct page *page,
struct writeback_control *wbc)
{
return __write_node_page(page, false, NULL, wbc, false, FS_NODE_IO);
}
int fsync_node_pages(struct f2fs_sb_info *sbi, struct inode *inode,
struct writeback_control *wbc, bool atomic)
{
pgoff_t index;
pgoff_t last_idx = ULONG_MAX;
struct pagevec pvec;
int ret = 0;
struct page *last_page = NULL;
bool marked = false;
nid_t ino = inode->i_ino;
int nr_pages;
if (atomic) {
last_page = last_fsync_dnode(sbi, ino);
if (IS_ERR_OR_NULL(last_page))
return PTR_ERR_OR_ZERO(last_page);
}
retry:
pagevec_init(&pvec);
index = 0;
while ((nr_pages = pagevec_lookup_tag(&pvec, NODE_MAPPING(sbi), &index,
PAGECACHE_TAG_DIRTY))) {
int i;
for (i = 0; i < nr_pages; i++) {
struct page *page = pvec.pages[i];
bool submitted = false;
if (unlikely(f2fs_cp_error(sbi))) {
f2fs_put_page(last_page, 0);
pagevec_release(&pvec);
ret = -EIO;
goto out;
}
if (!IS_DNODE(page) || !is_cold_node(page))
continue;
if (ino_of_node(page) != ino)
continue;
lock_page(page);
if (unlikely(page->mapping != NODE_MAPPING(sbi))) {
continue_unlock:
unlock_page(page);
continue;
}
if (ino_of_node(page) != ino)
goto continue_unlock;
if (!PageDirty(page) && page != last_page) {
/* someone wrote it for us */
goto continue_unlock;
}
f2fs_wait_on_page_writeback(page, NODE, true);
BUG_ON(PageWriteback(page));
set_fsync_mark(page, 0);
set_dentry_mark(page, 0);
if (!atomic || page == last_page) {
set_fsync_mark(page, 1);
if (IS_INODE(page)) {
if (is_inode_flag_set(inode,
FI_DIRTY_INODE))
update_inode(inode, page);
set_dentry_mark(page,
need_dentry_mark(sbi, ino));
}
/* may be written by other thread */
if (!PageDirty(page))
set_page_dirty(page);
}
if (!clear_page_dirty_for_io(page))
goto continue_unlock;
ret = __write_node_page(page, atomic &&
page == last_page,
&submitted, wbc, true,
FS_NODE_IO);
if (ret) {
unlock_page(page);
f2fs_put_page(last_page, 0);
break;
} else if (submitted) {
last_idx = page->index;
}
if (page == last_page) {
f2fs_put_page(page, 0);
marked = true;
break;
}
}
pagevec_release(&pvec);
cond_resched();
if (ret || marked)
break;
}
if (!ret && atomic && !marked) {
f2fs_msg(sbi->sb, KERN_DEBUG,
"Retry to write fsync mark: ino=%u, idx=%lx",
ino, last_page->index);
lock_page(last_page);
f2fs_wait_on_page_writeback(last_page, NODE, true);
set_page_dirty(last_page);
unlock_page(last_page);
goto retry;
}
out:
if (last_idx != ULONG_MAX)
f2fs_submit_merged_write_cond(sbi, NULL, ino, last_idx, NODE);
return ret ? -EIO: 0;
}
int sync_node_pages(struct f2fs_sb_info *sbi, struct writeback_control *wbc,
bool do_balance, enum iostat_type io_type)
{
pgoff_t index;
struct pagevec pvec;
int step = 0;
int nwritten = 0;
int ret = 0;
int nr_pages;
pagevec_init(&pvec);
next_step:
index = 0;
while ((nr_pages = pagevec_lookup_tag(&pvec, NODE_MAPPING(sbi), &index,
PAGECACHE_TAG_DIRTY))) {
int i;
for (i = 0; i < nr_pages; i++) {
struct page *page = pvec.pages[i];
bool submitted = false;
/*
* flushing sequence with step:
* 0. indirect nodes
* 1. dentry dnodes
* 2. file dnodes
*/
if (step == 0 && IS_DNODE(page))
continue;
if (step == 1 && (!IS_DNODE(page) ||
is_cold_node(page)))
continue;
if (step == 2 && (!IS_DNODE(page) ||
!is_cold_node(page)))
continue;
lock_node:
if (!trylock_page(page))
continue;
if (unlikely(page->mapping != NODE_MAPPING(sbi))) {
continue_unlock:
unlock_page(page);
continue;
}
if (!PageDirty(page)) {
/* someone wrote it for us */
goto continue_unlock;
}
/* flush inline_data */
if (is_inline_node(page)) {
clear_inline_node(page);
unlock_page(page);
flush_inline_data(sbi, ino_of_node(page));
goto lock_node;
}
f2fs_wait_on_page_writeback(page, NODE, true);
BUG_ON(PageWriteback(page));
if (!clear_page_dirty_for_io(page))
goto continue_unlock;
set_fsync_mark(page, 0);
set_dentry_mark(page, 0);
ret = __write_node_page(page, false, &submitted,
wbc, do_balance, io_type);
if (ret)
unlock_page(page);
else if (submitted)
nwritten++;
if (--wbc->nr_to_write == 0)
break;
}
pagevec_release(&pvec);
cond_resched();
if (wbc->nr_to_write == 0) {
step = 2;
break;
}
}
if (step < 2) {
step++;
goto next_step;
}
if (nwritten)
f2fs_submit_merged_write(sbi, NODE);
if (unlikely(f2fs_cp_error(sbi)))
return -EIO;
return ret;
}
int wait_on_node_pages_writeback(struct f2fs_sb_info *sbi, nid_t ino)
{
pgoff_t index = 0;
struct pagevec pvec;
int ret2, ret = 0;
int nr_pages;
pagevec_init(&pvec);
while ((nr_pages = pagevec_lookup_tag(&pvec, NODE_MAPPING(sbi), &index,
PAGECACHE_TAG_WRITEBACK))) {
int i;
for (i = 0; i < nr_pages; i++) {
struct page *page = pvec.pages[i];
if (ino && ino_of_node(page) == ino) {
f2fs_wait_on_page_writeback(page, NODE, true);
if (TestClearPageError(page))
ret = -EIO;
}
}
pagevec_release(&pvec);
cond_resched();
}
ret2 = filemap_check_errors(NODE_MAPPING(sbi));
if (!ret)
ret = ret2;
return ret;
}
static int f2fs_write_node_pages(struct address_space *mapping,
struct writeback_control *wbc)
{
struct f2fs_sb_info *sbi = F2FS_M_SB(mapping);
struct blk_plug plug;
long diff;
if (unlikely(is_sbi_flag_set(sbi, SBI_POR_DOING)))
goto skip_write;
/* balancing f2fs's metadata in background */
f2fs_balance_fs_bg(sbi);
/* collect a number of dirty node pages and write together */
if (get_pages(sbi, F2FS_DIRTY_NODES) < nr_pages_to_skip(sbi, NODE))
goto skip_write;
trace_f2fs_writepages(mapping->host, wbc, NODE);
diff = nr_pages_to_write(sbi, NODE, wbc);
wbc->sync_mode = WB_SYNC_NONE;
blk_start_plug(&plug);
sync_node_pages(sbi, wbc, true, FS_NODE_IO);
blk_finish_plug(&plug);
wbc->nr_to_write = max((long)0, wbc->nr_to_write - diff);
return 0;
skip_write:
wbc->pages_skipped += get_pages(sbi, F2FS_DIRTY_NODES);
trace_f2fs_writepages(mapping->host, wbc, NODE);
return 0;
}
static int f2fs_set_node_page_dirty(struct page *page)
{
trace_f2fs_set_page_dirty(page, NODE);
if (!PageUptodate(page))
SetPageUptodate(page);
if (!PageDirty(page)) {
f2fs_set_page_dirty_nobuffers(page);
inc_page_count(F2FS_P_SB(page), F2FS_DIRTY_NODES);
SetPagePrivate(page);
f2fs_trace_pid(page);
return 1;
}
return 0;
}
/*
* Structure of the f2fs node operations
*/
const struct address_space_operations f2fs_node_aops = {
.writepage = f2fs_write_node_page,
.writepages = f2fs_write_node_pages,
.set_page_dirty = f2fs_set_node_page_dirty,
.invalidatepage = f2fs_invalidate_page,
.releasepage = f2fs_release_page,
#ifdef CONFIG_MIGRATION
.migratepage = f2fs_migrate_page,
#endif
};
static struct free_nid *__lookup_free_nid_list(struct f2fs_nm_info *nm_i,
nid_t n)
{
return radix_tree_lookup(&nm_i->free_nid_root, n);
}
static int __insert_free_nid(struct f2fs_sb_info *sbi,
struct free_nid *i, enum nid_state state)
{
struct f2fs_nm_info *nm_i = NM_I(sbi);
int err = radix_tree_insert(&nm_i->free_nid_root, i->nid, i);
if (err)
return err;
f2fs_bug_on(sbi, state != i->state);
nm_i->nid_cnt[state]++;
if (state == FREE_NID)
list_add_tail(&i->list, &nm_i->free_nid_list);
return 0;
}
static void __remove_free_nid(struct f2fs_sb_info *sbi,
struct free_nid *i, enum nid_state state)
{
struct f2fs_nm_info *nm_i = NM_I(sbi);
f2fs_bug_on(sbi, state != i->state);
nm_i->nid_cnt[state]--;
if (state == FREE_NID)
list_del(&i->list);
radix_tree_delete(&nm_i->free_nid_root, i->nid);
}
static void __move_free_nid(struct f2fs_sb_info *sbi, struct free_nid *i,
enum nid_state org_state, enum nid_state dst_state)
{
struct f2fs_nm_info *nm_i = NM_I(sbi);
f2fs_bug_on(sbi, org_state != i->state);
i->state = dst_state;
nm_i->nid_cnt[org_state]--;
nm_i->nid_cnt[dst_state]++;
switch (dst_state) {
case PREALLOC_NID:
list_del(&i->list);
break;
case FREE_NID:
list_add_tail(&i->list, &nm_i->free_nid_list);
break;
default:
BUG_ON(1);
}
}
static void update_free_nid_bitmap(struct f2fs_sb_info *sbi, nid_t nid,
bool set, bool build)
{
struct f2fs_nm_info *nm_i = NM_I(sbi);
unsigned int nat_ofs = NAT_BLOCK_OFFSET(nid);
unsigned int nid_ofs = nid - START_NID(nid);
if (!test_bit_le(nat_ofs, nm_i->nat_block_bitmap))
return;
if (set) {
if (test_bit_le(nid_ofs, nm_i->free_nid_bitmap[nat_ofs]))
return;
__set_bit_le(nid_ofs, nm_i->free_nid_bitmap[nat_ofs]);
nm_i->free_nid_count[nat_ofs]++;
} else {
if (!test_bit_le(nid_ofs, nm_i->free_nid_bitmap[nat_ofs]))
return;
__clear_bit_le(nid_ofs, nm_i->free_nid_bitmap[nat_ofs]);
if (!build)
nm_i->free_nid_count[nat_ofs]--;
}
}
/* return if the nid is recognized as free */
static bool add_free_nid(struct f2fs_sb_info *sbi,
nid_t nid, bool build, bool update)
{
struct f2fs_nm_info *nm_i = NM_I(sbi);
struct free_nid *i, *e;
struct nat_entry *ne;
int err = -EINVAL;
bool ret = false;
/* 0 nid should not be used */
if (unlikely(nid == 0))
return false;
i = f2fs_kmem_cache_alloc(free_nid_slab, GFP_NOFS);
i->nid = nid;
i->state = FREE_NID;
radix_tree_preload(GFP_NOFS | __GFP_NOFAIL);
spin_lock(&nm_i->nid_list_lock);
if (build) {
/*
* Thread A Thread B
* - f2fs_create
* - f2fs_new_inode
* - alloc_nid
* - __insert_nid_to_list(PREALLOC_NID)
* - f2fs_balance_fs_bg
* - build_free_nids
* - __build_free_nids
* - scan_nat_page
* - add_free_nid
* - __lookup_nat_cache
* - f2fs_add_link
* - init_inode_metadata
* - new_inode_page
* - new_node_page
* - set_node_addr
* - alloc_nid_done
* - __remove_nid_from_list(PREALLOC_NID)
* - __insert_nid_to_list(FREE_NID)
*/
ne = __lookup_nat_cache(nm_i, nid);
if (ne && (!get_nat_flag(ne, IS_CHECKPOINTED) ||
nat_get_blkaddr(ne) != NULL_ADDR))
goto err_out;
e = __lookup_free_nid_list(nm_i, nid);
if (e) {
if (e->state == FREE_NID)
ret = true;
goto err_out;
}
}
ret = true;
err = __insert_free_nid(sbi, i, FREE_NID);
err_out:
if (update) {
update_free_nid_bitmap(sbi, nid, ret, build);
if (!build)
nm_i->available_nids++;
}
spin_unlock(&nm_i->nid_list_lock);
radix_tree_preload_end();
if (err)
kmem_cache_free(free_nid_slab, i);
return ret;
}
static void remove_free_nid(struct f2fs_sb_info *sbi, nid_t nid)
{
struct f2fs_nm_info *nm_i = NM_I(sbi);
struct free_nid *i;
bool need_free = false;
spin_lock(&nm_i->nid_list_lock);
i = __lookup_free_nid_list(nm_i, nid);
if (i && i->state == FREE_NID) {
__remove_free_nid(sbi, i, FREE_NID);
need_free = true;
}
spin_unlock(&nm_i->nid_list_lock);
if (need_free)
kmem_cache_free(free_nid_slab, i);
}
static void scan_nat_page(struct f2fs_sb_info *sbi,
struct page *nat_page, nid_t start_nid)
{
struct f2fs_nm_info *nm_i = NM_I(sbi);
struct f2fs_nat_block *nat_blk = page_address(nat_page);
block_t blk_addr;
unsigned int nat_ofs = NAT_BLOCK_OFFSET(start_nid);
int i;
__set_bit_le(nat_ofs, nm_i->nat_block_bitmap);
i = start_nid % NAT_ENTRY_PER_BLOCK;
for (; i < NAT_ENTRY_PER_BLOCK; i++, start_nid++) {
if (unlikely(start_nid >= nm_i->max_nid))
break;
blk_addr = le32_to_cpu(nat_blk->entries[i].block_addr);
f2fs_bug_on(sbi, blk_addr == NEW_ADDR);
if (blk_addr == NULL_ADDR) {
add_free_nid(sbi, start_nid, true, true);
} else {
spin_lock(&NM_I(sbi)->nid_list_lock);
update_free_nid_bitmap(sbi, start_nid, false, true);
spin_unlock(&NM_I(sbi)->nid_list_lock);
}
}
}
static void scan_curseg_cache(struct f2fs_sb_info *sbi)
{
struct curseg_info *curseg = CURSEG_I(sbi, CURSEG_HOT_DATA);
struct f2fs_journal *journal = curseg->journal;
int i;
down_read(&curseg->journal_rwsem);
for (i = 0; i < nats_in_cursum(journal); i++) {
block_t addr;
nid_t nid;
addr = le32_to_cpu(nat_in_journal(journal, i).block_addr);
nid = le32_to_cpu(nid_in_journal(journal, i));
if (addr == NULL_ADDR)
add_free_nid(sbi, nid, true, false);
else
remove_free_nid(sbi, nid);
}
up_read(&curseg->journal_rwsem);
}
static void scan_free_nid_bits(struct f2fs_sb_info *sbi)
{
struct f2fs_nm_info *nm_i = NM_I(sbi);
unsigned int i, idx;
nid_t nid;
down_read(&nm_i->nat_tree_lock);
for (i = 0; i < nm_i->nat_blocks; i++) {
if (!test_bit_le(i, nm_i->nat_block_bitmap))
continue;
if (!nm_i->free_nid_count[i])
continue;
for (idx = 0; idx < NAT_ENTRY_PER_BLOCK; idx++) {
idx = find_next_bit_le(nm_i->free_nid_bitmap[i],
NAT_ENTRY_PER_BLOCK, idx);
if (idx >= NAT_ENTRY_PER_BLOCK)
break;
nid = i * NAT_ENTRY_PER_BLOCK + idx;
add_free_nid(sbi, nid, true, false);
if (nm_i->nid_cnt[FREE_NID] >= MAX_FREE_NIDS)
goto out;
}
}
out:
scan_curseg_cache(sbi);
up_read(&nm_i->nat_tree_lock);
}
static void __build_free_nids(struct f2fs_sb_info *sbi, bool sync, bool mount)
{
struct f2fs_nm_info *nm_i = NM_I(sbi);
int i = 0;
nid_t nid = nm_i->next_scan_nid;
if (unlikely(nid >= nm_i->max_nid))
nid = 0;
/* Enough entries */
if (nm_i->nid_cnt[FREE_NID] >= NAT_ENTRY_PER_BLOCK)
return;
if (!sync && !available_free_memory(sbi, FREE_NIDS))
return;
if (!mount) {
/* try to find free nids in free_nid_bitmap */
scan_free_nid_bits(sbi);
if (nm_i->nid_cnt[FREE_NID] >= NAT_ENTRY_PER_BLOCK)
return;
}
/* readahead nat pages to be scanned */
ra_meta_pages(sbi, NAT_BLOCK_OFFSET(nid), FREE_NID_PAGES,
META_NAT, true);
down_read(&nm_i->nat_tree_lock);
while (1) {
if (!test_bit_le(NAT_BLOCK_OFFSET(nid),
nm_i->nat_block_bitmap)) {
struct page *page = get_current_nat_page(sbi, nid);
scan_nat_page(sbi, page, nid);
f2fs_put_page(page, 1);
}
nid += (NAT_ENTRY_PER_BLOCK - (nid % NAT_ENTRY_PER_BLOCK));
if (unlikely(nid >= nm_i->max_nid))
nid = 0;
if (++i >= FREE_NID_PAGES)
break;
}
/* go to the next free nat pages to find free nids abundantly */
nm_i->next_scan_nid = nid;
/* find free nids from current sum_pages */
scan_curseg_cache(sbi);
up_read(&nm_i->nat_tree_lock);
ra_meta_pages(sbi, NAT_BLOCK_OFFSET(nm_i->next_scan_nid),
nm_i->ra_nid_pages, META_NAT, false);
}
void build_free_nids(struct f2fs_sb_info *sbi, bool sync, bool mount)
{
mutex_lock(&NM_I(sbi)->build_lock);
__build_free_nids(sbi, sync, mount);
mutex_unlock(&NM_I(sbi)->build_lock);
}
/*
* If this function returns success, caller can obtain a new nid
* from second parameter of this function.
* The returned nid could be used ino as well as nid when inode is created.
*/
bool alloc_nid(struct f2fs_sb_info *sbi, nid_t *nid)
{
struct f2fs_nm_info *nm_i = NM_I(sbi);
struct free_nid *i = NULL;
retry:
#ifdef CONFIG_F2FS_FAULT_INJECTION
if (time_to_inject(sbi, FAULT_ALLOC_NID)) {
f2fs_show_injection_info(FAULT_ALLOC_NID);
return false;
}
#endif
spin_lock(&nm_i->nid_list_lock);
if (unlikely(nm_i->available_nids == 0)) {
spin_unlock(&nm_i->nid_list_lock);
return false;
}
/* We should not use stale free nids created by build_free_nids */
if (nm_i->nid_cnt[FREE_NID] && !on_build_free_nids(nm_i)) {
f2fs_bug_on(sbi, list_empty(&nm_i->free_nid_list));
i = list_first_entry(&nm_i->free_nid_list,
struct free_nid, list);
*nid = i->nid;
__move_free_nid(sbi, i, FREE_NID, PREALLOC_NID);
nm_i->available_nids--;
update_free_nid_bitmap(sbi, *nid, false, false);
spin_unlock(&nm_i->nid_list_lock);
return true;
}
spin_unlock(&nm_i->nid_list_lock);
/* Let's scan nat pages and its caches to get free nids */
build_free_nids(sbi, true, false);
goto retry;
}
/*
* alloc_nid() should be called prior to this function.
*/
void alloc_nid_done(struct f2fs_sb_info *sbi, nid_t nid)
{
struct f2fs_nm_info *nm_i = NM_I(sbi);
struct free_nid *i;
spin_lock(&nm_i->nid_list_lock);
i = __lookup_free_nid_list(nm_i, nid);
f2fs_bug_on(sbi, !i);
__remove_free_nid(sbi, i, PREALLOC_NID);
spin_unlock(&nm_i->nid_list_lock);
kmem_cache_free(free_nid_slab, i);
}
/*
* alloc_nid() should be called prior to this function.
*/
void alloc_nid_failed(struct f2fs_sb_info *sbi, nid_t nid)
{
struct f2fs_nm_info *nm_i = NM_I(sbi);
struct free_nid *i;
bool need_free = false;
if (!nid)
return;
spin_lock(&nm_i->nid_list_lock);
i = __lookup_free_nid_list(nm_i, nid);
f2fs_bug_on(sbi, !i);
if (!available_free_memory(sbi, FREE_NIDS)) {
__remove_free_nid(sbi, i, PREALLOC_NID);
need_free = true;
} else {
__move_free_nid(sbi, i, PREALLOC_NID, FREE_NID);
}
nm_i->available_nids++;
update_free_nid_bitmap(sbi, nid, true, false);
spin_unlock(&nm_i->nid_list_lock);
if (need_free)
kmem_cache_free(free_nid_slab, i);
}
int try_to_free_nids(struct f2fs_sb_info *sbi, int nr_shrink)
{
struct f2fs_nm_info *nm_i = NM_I(sbi);
struct free_nid *i, *next;
int nr = nr_shrink;
if (nm_i->nid_cnt[FREE_NID] <= MAX_FREE_NIDS)
return 0;
if (!mutex_trylock(&nm_i->build_lock))
return 0;
spin_lock(&nm_i->nid_list_lock);
list_for_each_entry_safe(i, next, &nm_i->free_nid_list, list) {
if (nr_shrink <= 0 ||
nm_i->nid_cnt[FREE_NID] <= MAX_FREE_NIDS)
break;
__remove_free_nid(sbi, i, FREE_NID);
kmem_cache_free(free_nid_slab, i);
nr_shrink--;
}
spin_unlock(&nm_i->nid_list_lock);
mutex_unlock(&nm_i->build_lock);
return nr - nr_shrink;
}
void recover_inline_xattr(struct inode *inode, struct page *page)
{
void *src_addr, *dst_addr;
size_t inline_size;
struct page *ipage;
struct f2fs_inode *ri;
ipage = get_node_page(F2FS_I_SB(inode), inode->i_ino);
f2fs_bug_on(F2FS_I_SB(inode), IS_ERR(ipage));
ri = F2FS_INODE(page);
if (ri->i_inline & F2FS_INLINE_XATTR) {
set_inode_flag(inode, FI_INLINE_XATTR);
} else {
clear_inode_flag(inode, FI_INLINE_XATTR);
goto update_inode;
}
f2fs: support flexible inline xattr size Now, in product, more and more features based on file encryption were introduced, their demand of xattr space is increasing, however, inline xattr has fixed-size of 200 bytes, once inline xattr space is full, new increased xattr data would occupy additional xattr block which may bring us more space usage and performance regression during persisting. In order to resolve above issue, it's better to expand inline xattr size flexibly according to user's requirement. So this patch introduces new filesystem feature 'flexible inline xattr', and new mount option 'inline_xattr_size=%u', once mkfs enables the feature, we can use the option to make f2fs supporting flexible inline xattr size. To support this feature, we add extra attribute i_inline_xattr_size in inode layout, indicating that how many space inline xattr borrows from block address mapping space in inode layout, by this, we can easily locate and store flexible-sized inline xattr data in inode. Inode disk layout: +----------------------+ | .i_mode | | ... | | .i_ext | +----------------------+ | .i_extra_isize | | .i_inline_xattr_size |-----------+ | ... | | +----------------------+ | | .i_addr | | | - block address or | | | - inline data | | +----------------------+<---+ v | inline xattr | +---inline xattr range +----------------------+<---+ | .i_nid | +----------------------+ | node_footer | | (nid, ino, offset) | +----------------------+ Note that, we have to cnosider backward compatibility which reserved inline_data space, 200 bytes, all the time, reported by Sheng Yong. Previous inline data or directory always reserved 200 bytes in inode layout, even if inline_xattr is disabled. In order to keep inline_dentry's structure for backward compatibility, we get the space back only from inline_data. Signed-off-by: Chao Yu <yuchao0@huawei.com> Reported-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-09-06 16:59:50 +03:00
dst_addr = inline_xattr_addr(inode, ipage);
src_addr = inline_xattr_addr(inode, page);
inline_size = inline_xattr_size(inode);
f2fs_wait_on_page_writeback(ipage, NODE, true);
memcpy(dst_addr, src_addr, inline_size);
update_inode:
update_inode(inode, ipage);
f2fs_put_page(ipage, 1);
}
int recover_xattr_data(struct inode *inode, struct page *page)
{
struct f2fs_sb_info *sbi = F2FS_I_SB(inode);
nid_t prev_xnid = F2FS_I(inode)->i_xattr_nid;
nid_t new_xnid;
struct dnode_of_data dn;
struct node_info ni;
struct page *xpage;
if (!prev_xnid)
goto recover_xnid;
/* 1: invalidate the previous xattr nid */
get_node_info(sbi, prev_xnid, &ni);
invalidate_blocks(sbi, ni.blk_addr);
dec_valid_node_count(sbi, inode, false);
set_node_addr(sbi, &ni, NULL_ADDR, false);
recover_xnid:
/* 2: update xattr nid in inode */
if (!alloc_nid(sbi, &new_xnid))
return -ENOSPC;
set_new_dnode(&dn, inode, NULL, NULL, new_xnid);
xpage = new_node_page(&dn, XATTR_NODE_OFFSET);
if (IS_ERR(xpage)) {
alloc_nid_failed(sbi, new_xnid);
return PTR_ERR(xpage);
}
alloc_nid_done(sbi, new_xnid);
update_inode_page(inode);
/* 3: update and set xattr node page dirty */
memcpy(F2FS_NODE(xpage), F2FS_NODE(page), VALID_XATTR_BLOCK_SIZE);
set_page_dirty(xpage);
f2fs_put_page(xpage, 1);
return 0;
}
int recover_inode_page(struct f2fs_sb_info *sbi, struct page *page)
{
struct f2fs_inode *src, *dst;
nid_t ino = ino_of_node(page);
struct node_info old_ni, new_ni;
struct page *ipage;
get_node_info(sbi, ino, &old_ni);
if (unlikely(old_ni.blk_addr != NULL_ADDR))
return -EINVAL;
retry:
ipage = f2fs_grab_cache_page(NODE_MAPPING(sbi), ino, false);
if (!ipage) {
congestion_wait(BLK_RW_ASYNC, HZ/50);
goto retry;
}
/* Should not use this inode from free nid list */
remove_free_nid(sbi, ino);
if (!PageUptodate(ipage))
SetPageUptodate(ipage);
fill_node_footer(ipage, ino, ino, 0, true);
set_cold_node(page, false);
src = F2FS_INODE(page);
dst = F2FS_INODE(ipage);
memcpy(dst, src, (unsigned long)&src->i_ext - (unsigned long)src);
dst->i_size = 0;
dst->i_blocks = cpu_to_le64(1);
dst->i_links = cpu_to_le32(1);
dst->i_xattr_nid = 0;
f2fs: enhance on-disk inode structure scalability This patch add new flag F2FS_EXTRA_ATTR storing in inode.i_inline to indicate that on-disk structure of current inode is extended. In order to extend, we changed the inode structure a bit: Original one: struct f2fs_inode { ... struct f2fs_extent i_ext; __le32 i_addr[DEF_ADDRS_PER_INODE]; __le32 i_nid[DEF_NIDS_PER_INODE]; } Extended one: struct f2fs_inode { ... struct f2fs_extent i_ext; union { struct { __le16 i_extra_isize; __le16 i_padding; __le32 i_extra_end[0]; }; __le32 i_addr[DEF_ADDRS_PER_INODE]; }; __le32 i_nid[DEF_NIDS_PER_INODE]; } Once F2FS_EXTRA_ATTR is set, we will steal four bytes in the head of i_addr field for storing i_extra_isize and i_padding. with i_extra_isize, we can calculate actual size of reserved space in i_addr, available attribute fields included in total extra attribute fields for current inode can be described as below: +--------------------+ | .i_mode | | ... | | .i_ext | +--------------------+ | .i_extra_isize |-----+ | .i_padding | | | .i_prjid | | | .i_atime_extra | | | .i_ctime_extra | | | .i_mtime_extra |<----+ | .i_inode_cs |<----- store blkaddr/inline from here | .i_xattr_cs | | ... | +--------------------+ | | | block address | | | +--------------------+ | .i_nid | +--------------------+ | node_footer | | (nid, ino, offset) | +--------------------+ Hence, with this patch, we would enhance scalability of f2fs inode for storing more newly added attribute. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-07-18 19:19:06 +03:00
dst->i_inline = src->i_inline & (F2FS_INLINE_XATTR | F2FS_EXTRA_ATTR);
if (dst->i_inline & F2FS_EXTRA_ATTR) {
f2fs: enhance on-disk inode structure scalability This patch add new flag F2FS_EXTRA_ATTR storing in inode.i_inline to indicate that on-disk structure of current inode is extended. In order to extend, we changed the inode structure a bit: Original one: struct f2fs_inode { ... struct f2fs_extent i_ext; __le32 i_addr[DEF_ADDRS_PER_INODE]; __le32 i_nid[DEF_NIDS_PER_INODE]; } Extended one: struct f2fs_inode { ... struct f2fs_extent i_ext; union { struct { __le16 i_extra_isize; __le16 i_padding; __le32 i_extra_end[0]; }; __le32 i_addr[DEF_ADDRS_PER_INODE]; }; __le32 i_nid[DEF_NIDS_PER_INODE]; } Once F2FS_EXTRA_ATTR is set, we will steal four bytes in the head of i_addr field for storing i_extra_isize and i_padding. with i_extra_isize, we can calculate actual size of reserved space in i_addr, available attribute fields included in total extra attribute fields for current inode can be described as below: +--------------------+ | .i_mode | | ... | | .i_ext | +--------------------+ | .i_extra_isize |-----+ | .i_padding | | | .i_prjid | | | .i_atime_extra | | | .i_ctime_extra | | | .i_mtime_extra |<----+ | .i_inode_cs |<----- store blkaddr/inline from here | .i_xattr_cs | | ... | +--------------------+ | | | block address | | | +--------------------+ | .i_nid | +--------------------+ | node_footer | | (nid, ino, offset) | +--------------------+ Hence, with this patch, we would enhance scalability of f2fs inode for storing more newly added attribute. Signed-off-by: Chao Yu <yuchao0@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-07-18 19:19:06 +03:00
dst->i_extra_isize = src->i_extra_isize;
f2fs: support flexible inline xattr size Now, in product, more and more features based on file encryption were introduced, their demand of xattr space is increasing, however, inline xattr has fixed-size of 200 bytes, once inline xattr space is full, new increased xattr data would occupy additional xattr block which may bring us more space usage and performance regression during persisting. In order to resolve above issue, it's better to expand inline xattr size flexibly according to user's requirement. So this patch introduces new filesystem feature 'flexible inline xattr', and new mount option 'inline_xattr_size=%u', once mkfs enables the feature, we can use the option to make f2fs supporting flexible inline xattr size. To support this feature, we add extra attribute i_inline_xattr_size in inode layout, indicating that how many space inline xattr borrows from block address mapping space in inode layout, by this, we can easily locate and store flexible-sized inline xattr data in inode. Inode disk layout: +----------------------+ | .i_mode | | ... | | .i_ext | +----------------------+ | .i_extra_isize | | .i_inline_xattr_size |-----------+ | ... | | +----------------------+ | | .i_addr | | | - block address or | | | - inline data | | +----------------------+<---+ v | inline xattr | +---inline xattr range +----------------------+<---+ | .i_nid | +----------------------+ | node_footer | | (nid, ino, offset) | +----------------------+ Note that, we have to cnosider backward compatibility which reserved inline_data space, 200 bytes, all the time, reported by Sheng Yong. Previous inline data or directory always reserved 200 bytes in inode layout, even if inline_xattr is disabled. In order to keep inline_dentry's structure for backward compatibility, we get the space back only from inline_data. Signed-off-by: Chao Yu <yuchao0@huawei.com> Reported-by: Sheng Yong <shengyong1@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-09-06 16:59:50 +03:00
if (f2fs_sb_has_flexible_inline_xattr(sbi->sb) &&
F2FS_FITS_IN_INODE(src, le16_to_cpu(src->i_extra_isize),
i_inline_xattr_size))
dst->i_inline_xattr_size = src->i_inline_xattr_size;
if (f2fs_sb_has_project_quota(sbi->sb) &&
F2FS_FITS_IN_INODE(src, le16_to_cpu(src->i_extra_isize),
i_projid))
dst->i_projid = src->i_projid;
}
new_ni = old_ni;
new_ni.ino = ino;
if (unlikely(inc_valid_node_count(sbi, NULL, true)))
WARN_ON(1);
set_node_addr(sbi, &new_ni, NEW_ADDR, false);
inc_valid_inode_count(sbi);
set_page_dirty(ipage);
f2fs_put_page(ipage, 1);
return 0;
}
void restore_node_summary(struct f2fs_sb_info *sbi,
unsigned int segno, struct f2fs_summary_block *sum)
{
struct f2fs_node *rn;
struct f2fs_summary *sum_entry;
block_t addr;
int i, idx, last_offset, nrpages;
/* scan the node segment */
last_offset = sbi->blocks_per_seg;
addr = START_BLOCK(sbi, segno);
sum_entry = &sum->entries[0];
for (i = 0; i < last_offset; i += nrpages, addr += nrpages) {
nrpages = min(last_offset - i, BIO_MAX_PAGES);
/* readahead node pages */
ra_meta_pages(sbi, addr, nrpages, META_POR, true);
for (idx = addr; idx < addr + nrpages; idx++) {
struct page *page = get_tmp_page(sbi, idx);
rn = F2FS_NODE(page);
sum_entry->nid = rn->footer.nid;
sum_entry->version = 0;
sum_entry->ofs_in_node = 0;
sum_entry++;
f2fs_put_page(page, 1);
}
invalidate_mapping_pages(META_MAPPING(sbi), addr,
addr + nrpages);
}
}
f2fs: refactor flush_nat_entries codes for reducing NAT writes Although building NAT journal in cursum reduce the read/write work for NAT block, but previous design leave us lower performance when write checkpoint frequently for these cases: 1. if journal in cursum has already full, it's a bit of waste that we flush all nat entries to page for persistence, but not to cache any entries. 2. if journal in cursum is not full, we fill nat entries to journal util journal is full, then flush the left dirty entries to disk without merge journaled entries, so these journaled entries may be flushed to disk at next checkpoint but lost chance to flushed last time. In this patch we merge dirty entries located in same NAT block to nat entry set, and linked all set to list, sorted ascending order by entries' count of set. Later we flush entries in sparse set into journal as many as we can, and then flush merged entries to disk. In this way we can not only gain in performance, but also save lifetime of flash device. In my testing environment, it shows this patch can help to reduce NAT block writes obviously. In hard disk test case: cost time of fsstress is stablely reduced by about 5%. 1. virtual machine + hard disk: fsstress -p 20 -n 200 -l 5 node num cp count nodes/cp based 4599.6 1803.0 2.551 patched 2714.6 1829.6 1.483 2. virtual machine + 32g micro SD card: fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0 -f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5 -f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S node num cp count nodes/cp based 84.5 43.7 1.933 patched 49.2 40.0 1.23 Our latency of merging op shows not bad when handling extreme case like: merging a great number of dirty nats: latency(ns) dirty nat count 3089219 24922 5129423 27422 4000250 24523 change log from v1: o fix wrong logic in add_nat_entry when grab a new nat entry set. o swith to create slab cache in create_node_manager_caches. o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency. change log from v2: o make comment position more appropriate suggested by Jaegeuk Kim. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
static void remove_nats_in_journal(struct f2fs_sb_info *sbi)
{
struct f2fs_nm_info *nm_i = NM_I(sbi);
struct curseg_info *curseg = CURSEG_I(sbi, CURSEG_HOT_DATA);
struct f2fs_journal *journal = curseg->journal;
int i;
down_write(&curseg->journal_rwsem);
for (i = 0; i < nats_in_cursum(journal); i++) {
struct nat_entry *ne;
struct f2fs_nat_entry raw_ne;
nid_t nid = le32_to_cpu(nid_in_journal(journal, i));
raw_ne = nat_in_journal(journal, i);
ne = __lookup_nat_cache(nm_i, nid);
if (!ne) {
ne = __alloc_nat_entry(nid, true);
__init_nat_entry(nm_i, ne, &raw_ne, true);
}
/*
* if a free nat in journal has not been used after last
* checkpoint, we should remove it from available nids,
* since later we will add it again.
*/
if (!get_nat_flag(ne, IS_DIRTY) &&
le32_to_cpu(raw_ne.block_addr) == NULL_ADDR) {
spin_lock(&nm_i->nid_list_lock);
nm_i->available_nids--;
spin_unlock(&nm_i->nid_list_lock);
}
__set_nat_cache_dirty(nm_i, ne);
}
update_nats_in_cursum(journal, -i);
up_write(&curseg->journal_rwsem);
}
static void __adjust_nat_entry_set(struct nat_entry_set *nes,
struct list_head *head, int max)
{
struct nat_entry_set *cur;
if (nes->entry_cnt >= max)
goto add_out;
list_for_each_entry(cur, head, set_list) {
if (cur->entry_cnt >= nes->entry_cnt) {
list_add(&nes->set_list, cur->set_list.prev);
return;
}
f2fs: refactor flush_nat_entries codes for reducing NAT writes Although building NAT journal in cursum reduce the read/write work for NAT block, but previous design leave us lower performance when write checkpoint frequently for these cases: 1. if journal in cursum has already full, it's a bit of waste that we flush all nat entries to page for persistence, but not to cache any entries. 2. if journal in cursum is not full, we fill nat entries to journal util journal is full, then flush the left dirty entries to disk without merge journaled entries, so these journaled entries may be flushed to disk at next checkpoint but lost chance to flushed last time. In this patch we merge dirty entries located in same NAT block to nat entry set, and linked all set to list, sorted ascending order by entries' count of set. Later we flush entries in sparse set into journal as many as we can, and then flush merged entries to disk. In this way we can not only gain in performance, but also save lifetime of flash device. In my testing environment, it shows this patch can help to reduce NAT block writes obviously. In hard disk test case: cost time of fsstress is stablely reduced by about 5%. 1. virtual machine + hard disk: fsstress -p 20 -n 200 -l 5 node num cp count nodes/cp based 4599.6 1803.0 2.551 patched 2714.6 1829.6 1.483 2. virtual machine + 32g micro SD card: fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0 -f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5 -f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S node num cp count nodes/cp based 84.5 43.7 1.933 patched 49.2 40.0 1.23 Our latency of merging op shows not bad when handling extreme case like: merging a great number of dirty nats: latency(ns) dirty nat count 3089219 24922 5129423 27422 4000250 24523 change log from v1: o fix wrong logic in add_nat_entry when grab a new nat entry set. o swith to create slab cache in create_node_manager_caches. o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency. change log from v2: o make comment position more appropriate suggested by Jaegeuk Kim. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
}
add_out:
list_add_tail(&nes->set_list, head);
}
static void __update_nat_bits(struct f2fs_sb_info *sbi, nid_t start_nid,
struct page *page)
{
struct f2fs_nm_info *nm_i = NM_I(sbi);
unsigned int nat_index = start_nid / NAT_ENTRY_PER_BLOCK;
struct f2fs_nat_block *nat_blk = page_address(page);
int valid = 0;
int i = 0;
if (!enabled_nat_bits(sbi, NULL))
return;
if (nat_index == 0) {
valid = 1;
i = 1;
}
for (; i < NAT_ENTRY_PER_BLOCK; i++) {
if (nat_blk->entries[i].block_addr != NULL_ADDR)
valid++;
}
if (valid == 0) {
__set_bit_le(nat_index, nm_i->empty_nat_bits);
__clear_bit_le(nat_index, nm_i->full_nat_bits);
return;
}
__clear_bit_le(nat_index, nm_i->empty_nat_bits);
if (valid == NAT_ENTRY_PER_BLOCK)
__set_bit_le(nat_index, nm_i->full_nat_bits);
else
__clear_bit_le(nat_index, nm_i->full_nat_bits);
}
static void __flush_nat_entry_set(struct f2fs_sb_info *sbi,
struct nat_entry_set *set, struct cp_control *cpc)
{
struct curseg_info *curseg = CURSEG_I(sbi, CURSEG_HOT_DATA);
struct f2fs_journal *journal = curseg->journal;
nid_t start_nid = set->set * NAT_ENTRY_PER_BLOCK;
bool to_journal = true;
struct f2fs_nat_block *nat_blk;
struct nat_entry *ne, *cur;
struct page *page = NULL;
f2fs: refactor flush_nat_entries codes for reducing NAT writes Although building NAT journal in cursum reduce the read/write work for NAT block, but previous design leave us lower performance when write checkpoint frequently for these cases: 1. if journal in cursum has already full, it's a bit of waste that we flush all nat entries to page for persistence, but not to cache any entries. 2. if journal in cursum is not full, we fill nat entries to journal util journal is full, then flush the left dirty entries to disk without merge journaled entries, so these journaled entries may be flushed to disk at next checkpoint but lost chance to flushed last time. In this patch we merge dirty entries located in same NAT block to nat entry set, and linked all set to list, sorted ascending order by entries' count of set. Later we flush entries in sparse set into journal as many as we can, and then flush merged entries to disk. In this way we can not only gain in performance, but also save lifetime of flash device. In my testing environment, it shows this patch can help to reduce NAT block writes obviously. In hard disk test case: cost time of fsstress is stablely reduced by about 5%. 1. virtual machine + hard disk: fsstress -p 20 -n 200 -l 5 node num cp count nodes/cp based 4599.6 1803.0 2.551 patched 2714.6 1829.6 1.483 2. virtual machine + 32g micro SD card: fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0 -f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5 -f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S node num cp count nodes/cp based 84.5 43.7 1.933 patched 49.2 40.0 1.23 Our latency of merging op shows not bad when handling extreme case like: merging a great number of dirty nats: latency(ns) dirty nat count 3089219 24922 5129423 27422 4000250 24523 change log from v1: o fix wrong logic in add_nat_entry when grab a new nat entry set. o swith to create slab cache in create_node_manager_caches. o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency. change log from v2: o make comment position more appropriate suggested by Jaegeuk Kim. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
/*
* there are two steps to flush nat entries:
* #1, flush nat entries to journal in current hot data summary block.
* #2, flush nat entries to nat page.
*/
if (enabled_nat_bits(sbi, cpc) ||
!__has_cursum_space(journal, set->entry_cnt, NAT_JOURNAL))
to_journal = false;
if (to_journal) {
down_write(&curseg->journal_rwsem);
} else {
page = get_next_nat_page(sbi, start_nid);
nat_blk = page_address(page);
f2fs_bug_on(sbi, !nat_blk);
}
f2fs: refactor flush_nat_entries codes for reducing NAT writes Although building NAT journal in cursum reduce the read/write work for NAT block, but previous design leave us lower performance when write checkpoint frequently for these cases: 1. if journal in cursum has already full, it's a bit of waste that we flush all nat entries to page for persistence, but not to cache any entries. 2. if journal in cursum is not full, we fill nat entries to journal util journal is full, then flush the left dirty entries to disk without merge journaled entries, so these journaled entries may be flushed to disk at next checkpoint but lost chance to flushed last time. In this patch we merge dirty entries located in same NAT block to nat entry set, and linked all set to list, sorted ascending order by entries' count of set. Later we flush entries in sparse set into journal as many as we can, and then flush merged entries to disk. In this way we can not only gain in performance, but also save lifetime of flash device. In my testing environment, it shows this patch can help to reduce NAT block writes obviously. In hard disk test case: cost time of fsstress is stablely reduced by about 5%. 1. virtual machine + hard disk: fsstress -p 20 -n 200 -l 5 node num cp count nodes/cp based 4599.6 1803.0 2.551 patched 2714.6 1829.6 1.483 2. virtual machine + 32g micro SD card: fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0 -f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5 -f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S node num cp count nodes/cp based 84.5 43.7 1.933 patched 49.2 40.0 1.23 Our latency of merging op shows not bad when handling extreme case like: merging a great number of dirty nats: latency(ns) dirty nat count 3089219 24922 5129423 27422 4000250 24523 change log from v1: o fix wrong logic in add_nat_entry when grab a new nat entry set. o swith to create slab cache in create_node_manager_caches. o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency. change log from v2: o make comment position more appropriate suggested by Jaegeuk Kim. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
/* flush dirty nats in nat entry set */
list_for_each_entry_safe(ne, cur, &set->entry_list, list) {
struct f2fs_nat_entry *raw_ne;
nid_t nid = nat_get_nid(ne);
int offset;
f2fs_bug_on(sbi, nat_get_blkaddr(ne) == NEW_ADDR);
f2fs: refactor flush_nat_entries codes for reducing NAT writes Although building NAT journal in cursum reduce the read/write work for NAT block, but previous design leave us lower performance when write checkpoint frequently for these cases: 1. if journal in cursum has already full, it's a bit of waste that we flush all nat entries to page for persistence, but not to cache any entries. 2. if journal in cursum is not full, we fill nat entries to journal util journal is full, then flush the left dirty entries to disk without merge journaled entries, so these journaled entries may be flushed to disk at next checkpoint but lost chance to flushed last time. In this patch we merge dirty entries located in same NAT block to nat entry set, and linked all set to list, sorted ascending order by entries' count of set. Later we flush entries in sparse set into journal as many as we can, and then flush merged entries to disk. In this way we can not only gain in performance, but also save lifetime of flash device. In my testing environment, it shows this patch can help to reduce NAT block writes obviously. In hard disk test case: cost time of fsstress is stablely reduced by about 5%. 1. virtual machine + hard disk: fsstress -p 20 -n 200 -l 5 node num cp count nodes/cp based 4599.6 1803.0 2.551 patched 2714.6 1829.6 1.483 2. virtual machine + 32g micro SD card: fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0 -f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5 -f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S node num cp count nodes/cp based 84.5 43.7 1.933 patched 49.2 40.0 1.23 Our latency of merging op shows not bad when handling extreme case like: merging a great number of dirty nats: latency(ns) dirty nat count 3089219 24922 5129423 27422 4000250 24523 change log from v1: o fix wrong logic in add_nat_entry when grab a new nat entry set. o swith to create slab cache in create_node_manager_caches. o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency. change log from v2: o make comment position more appropriate suggested by Jaegeuk Kim. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
if (to_journal) {
offset = lookup_journal_in_cursum(journal,
NAT_JOURNAL, nid, 1);
f2fs_bug_on(sbi, offset < 0);
raw_ne = &nat_in_journal(journal, offset);
nid_in_journal(journal, offset) = cpu_to_le32(nid);
f2fs: refactor flush_nat_entries codes for reducing NAT writes Although building NAT journal in cursum reduce the read/write work for NAT block, but previous design leave us lower performance when write checkpoint frequently for these cases: 1. if journal in cursum has already full, it's a bit of waste that we flush all nat entries to page for persistence, but not to cache any entries. 2. if journal in cursum is not full, we fill nat entries to journal util journal is full, then flush the left dirty entries to disk without merge journaled entries, so these journaled entries may be flushed to disk at next checkpoint but lost chance to flushed last time. In this patch we merge dirty entries located in same NAT block to nat entry set, and linked all set to list, sorted ascending order by entries' count of set. Later we flush entries in sparse set into journal as many as we can, and then flush merged entries to disk. In this way we can not only gain in performance, but also save lifetime of flash device. In my testing environment, it shows this patch can help to reduce NAT block writes obviously. In hard disk test case: cost time of fsstress is stablely reduced by about 5%. 1. virtual machine + hard disk: fsstress -p 20 -n 200 -l 5 node num cp count nodes/cp based 4599.6 1803.0 2.551 patched 2714.6 1829.6 1.483 2. virtual machine + 32g micro SD card: fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0 -f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5 -f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S node num cp count nodes/cp based 84.5 43.7 1.933 patched 49.2 40.0 1.23 Our latency of merging op shows not bad when handling extreme case like: merging a great number of dirty nats: latency(ns) dirty nat count 3089219 24922 5129423 27422 4000250 24523 change log from v1: o fix wrong logic in add_nat_entry when grab a new nat entry set. o swith to create slab cache in create_node_manager_caches. o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency. change log from v2: o make comment position more appropriate suggested by Jaegeuk Kim. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
} else {
raw_ne = &nat_blk->entries[nid - start_nid];
}
raw_nat_from_node_info(raw_ne, &ne->ni);
nat_reset_flag(ne);
__clear_nat_cache_dirty(NM_I(sbi), set, ne);
if (nat_get_blkaddr(ne) == NULL_ADDR) {
add_free_nid(sbi, nid, false, true);
} else {
spin_lock(&NM_I(sbi)->nid_list_lock);
update_free_nid_bitmap(sbi, nid, false, false);
spin_unlock(&NM_I(sbi)->nid_list_lock);
}
}
if (to_journal) {
up_write(&curseg->journal_rwsem);
} else {
__update_nat_bits(sbi, start_nid, page);
f2fs_put_page(page, 1);
}
f2fs: refactor flush_nat_entries codes for reducing NAT writes Although building NAT journal in cursum reduce the read/write work for NAT block, but previous design leave us lower performance when write checkpoint frequently for these cases: 1. if journal in cursum has already full, it's a bit of waste that we flush all nat entries to page for persistence, but not to cache any entries. 2. if journal in cursum is not full, we fill nat entries to journal util journal is full, then flush the left dirty entries to disk without merge journaled entries, so these journaled entries may be flushed to disk at next checkpoint but lost chance to flushed last time. In this patch we merge dirty entries located in same NAT block to nat entry set, and linked all set to list, sorted ascending order by entries' count of set. Later we flush entries in sparse set into journal as many as we can, and then flush merged entries to disk. In this way we can not only gain in performance, but also save lifetime of flash device. In my testing environment, it shows this patch can help to reduce NAT block writes obviously. In hard disk test case: cost time of fsstress is stablely reduced by about 5%. 1. virtual machine + hard disk: fsstress -p 20 -n 200 -l 5 node num cp count nodes/cp based 4599.6 1803.0 2.551 patched 2714.6 1829.6 1.483 2. virtual machine + 32g micro SD card: fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0 -f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5 -f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S node num cp count nodes/cp based 84.5 43.7 1.933 patched 49.2 40.0 1.23 Our latency of merging op shows not bad when handling extreme case like: merging a great number of dirty nats: latency(ns) dirty nat count 3089219 24922 5129423 27422 4000250 24523 change log from v1: o fix wrong logic in add_nat_entry when grab a new nat entry set. o swith to create slab cache in create_node_manager_caches. o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency. change log from v2: o make comment position more appropriate suggested by Jaegeuk Kim. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
/* Allow dirty nats by node block allocation in write_begin */
if (!set->entry_cnt) {
radix_tree_delete(&NM_I(sbi)->nat_set_root, set->set);
kmem_cache_free(nat_entry_set_slab, set);
}
}
f2fs: refactor flush_nat_entries codes for reducing NAT writes Although building NAT journal in cursum reduce the read/write work for NAT block, but previous design leave us lower performance when write checkpoint frequently for these cases: 1. if journal in cursum has already full, it's a bit of waste that we flush all nat entries to page for persistence, but not to cache any entries. 2. if journal in cursum is not full, we fill nat entries to journal util journal is full, then flush the left dirty entries to disk without merge journaled entries, so these journaled entries may be flushed to disk at next checkpoint but lost chance to flushed last time. In this patch we merge dirty entries located in same NAT block to nat entry set, and linked all set to list, sorted ascending order by entries' count of set. Later we flush entries in sparse set into journal as many as we can, and then flush merged entries to disk. In this way we can not only gain in performance, but also save lifetime of flash device. In my testing environment, it shows this patch can help to reduce NAT block writes obviously. In hard disk test case: cost time of fsstress is stablely reduced by about 5%. 1. virtual machine + hard disk: fsstress -p 20 -n 200 -l 5 node num cp count nodes/cp based 4599.6 1803.0 2.551 patched 2714.6 1829.6 1.483 2. virtual machine + 32g micro SD card: fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0 -f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5 -f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S node num cp count nodes/cp based 84.5 43.7 1.933 patched 49.2 40.0 1.23 Our latency of merging op shows not bad when handling extreme case like: merging a great number of dirty nats: latency(ns) dirty nat count 3089219 24922 5129423 27422 4000250 24523 change log from v1: o fix wrong logic in add_nat_entry when grab a new nat entry set. o swith to create slab cache in create_node_manager_caches. o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency. change log from v2: o make comment position more appropriate suggested by Jaegeuk Kim. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
/*
* This function is called during the checkpointing process.
*/
void flush_nat_entries(struct f2fs_sb_info *sbi, struct cp_control *cpc)
{
struct f2fs_nm_info *nm_i = NM_I(sbi);
struct curseg_info *curseg = CURSEG_I(sbi, CURSEG_HOT_DATA);
struct f2fs_journal *journal = curseg->journal;
struct nat_entry_set *setvec[SETVEC_SIZE];
struct nat_entry_set *set, *tmp;
unsigned int found;
nid_t set_idx = 0;
LIST_HEAD(sets);
if (!nm_i->dirty_nat_cnt)
return;
down_write(&nm_i->nat_tree_lock);
/*
* if there are no enough space in journal to store dirty nat
* entries, remove all entries from journal and merge them
* into nat entry set.
*/
if (enabled_nat_bits(sbi, cpc) ||
!__has_cursum_space(journal, nm_i->dirty_nat_cnt, NAT_JOURNAL))
remove_nats_in_journal(sbi);
while ((found = __gang_lookup_nat_set(nm_i,
set_idx, SETVEC_SIZE, setvec))) {
unsigned idx;
set_idx = setvec[found - 1]->set + 1;
for (idx = 0; idx < found; idx++)
__adjust_nat_entry_set(setvec[idx], &sets,
MAX_NAT_JENTRIES(journal));
}
f2fs: refactor flush_nat_entries codes for reducing NAT writes Although building NAT journal in cursum reduce the read/write work for NAT block, but previous design leave us lower performance when write checkpoint frequently for these cases: 1. if journal in cursum has already full, it's a bit of waste that we flush all nat entries to page for persistence, but not to cache any entries. 2. if journal in cursum is not full, we fill nat entries to journal util journal is full, then flush the left dirty entries to disk without merge journaled entries, so these journaled entries may be flushed to disk at next checkpoint but lost chance to flushed last time. In this patch we merge dirty entries located in same NAT block to nat entry set, and linked all set to list, sorted ascending order by entries' count of set. Later we flush entries in sparse set into journal as many as we can, and then flush merged entries to disk. In this way we can not only gain in performance, but also save lifetime of flash device. In my testing environment, it shows this patch can help to reduce NAT block writes obviously. In hard disk test case: cost time of fsstress is stablely reduced by about 5%. 1. virtual machine + hard disk: fsstress -p 20 -n 200 -l 5 node num cp count nodes/cp based 4599.6 1803.0 2.551 patched 2714.6 1829.6 1.483 2. virtual machine + 32g micro SD card: fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0 -f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5 -f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S node num cp count nodes/cp based 84.5 43.7 1.933 patched 49.2 40.0 1.23 Our latency of merging op shows not bad when handling extreme case like: merging a great number of dirty nats: latency(ns) dirty nat count 3089219 24922 5129423 27422 4000250 24523 change log from v1: o fix wrong logic in add_nat_entry when grab a new nat entry set. o swith to create slab cache in create_node_manager_caches. o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency. change log from v2: o make comment position more appropriate suggested by Jaegeuk Kim. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
/* flush dirty nats in nat entry set */
list_for_each_entry_safe(set, tmp, &sets, set_list)
__flush_nat_entry_set(sbi, set, cpc);
up_write(&nm_i->nat_tree_lock);
/* Allow dirty nats by node block allocation in write_begin */
}
static int __get_nat_bitmaps(struct f2fs_sb_info *sbi)
{
struct f2fs_checkpoint *ckpt = F2FS_CKPT(sbi);
struct f2fs_nm_info *nm_i = NM_I(sbi);
unsigned int nat_bits_bytes = nm_i->nat_blocks / BITS_PER_BYTE;
unsigned int i;
__u64 cp_ver = cur_cp_version(ckpt);
block_t nat_bits_addr;
if (!enabled_nat_bits(sbi, NULL))
return 0;
nm_i->nat_bits_blocks = F2FS_BYTES_TO_BLK((nat_bits_bytes << 1) + 8 +
F2FS_BLKSIZE - 1);
nm_i->nat_bits = f2fs_kzalloc(sbi,
nm_i->nat_bits_blocks << F2FS_BLKSIZE_BITS, GFP_KERNEL);
if (!nm_i->nat_bits)
return -ENOMEM;
nat_bits_addr = __start_cp_addr(sbi) + sbi->blocks_per_seg -
nm_i->nat_bits_blocks;
for (i = 0; i < nm_i->nat_bits_blocks; i++) {
struct page *page = get_meta_page(sbi, nat_bits_addr++);
memcpy(nm_i->nat_bits + (i << F2FS_BLKSIZE_BITS),
page_address(page), F2FS_BLKSIZE);
f2fs_put_page(page, 1);
}
cp_ver |= (cur_cp_crc(ckpt) << 32);
if (cpu_to_le64(cp_ver) != *(__le64 *)nm_i->nat_bits) {
disable_nat_bits(sbi, true);
return 0;
}
nm_i->full_nat_bits = nm_i->nat_bits + 8;
nm_i->empty_nat_bits = nm_i->full_nat_bits + nat_bits_bytes;
f2fs_msg(sbi->sb, KERN_NOTICE, "Found nat_bits in checkpoint");
return 0;
}
static inline void load_free_nid_bitmap(struct f2fs_sb_info *sbi)
f2fs: combine nat_bits and free_nid_bitmap cache Both nat_bits cache and free_nid_bitmap cache provide same functionality as a intermediate cache between free nid cache and disk, but with different granularity of indicating free nid range, and different persistence policy. nat_bits cache provides better persistence ability, and free_nid_bitmap provides better granularity. In this patch we combine advantage of both caches, so finally policy of the intermediate cache would be: - init: load free nid status from nat_bits into free_nid_bitmap - lookup: scan free_nid_bitmap before load NAT blocks - update: update free_nid_bitmap in real-time - persistence: udpate and persist nat_bits in checkpoint This patch also resolves performance regression reported by lkp-robot. commit: 4ac912427c4214d8031d9ad6fbc3bc75e71512df ("f2fs: introduce free nid bitmap") d00030cf9cd0bb96fdccc41e33d3c91dcbb672ba ("f2fs: use __set{__clear}_bit_le") 1382c0f3f9d3f936c8bc42ed1591cf7a593ef9f7 ("f2fs: combine nat_bits and free_nid_bitmap cache") 4ac912427c4214d8 d00030cf9cd0bb96fdccc41e33 1382c0f3f9d3f936c8bc42ed15 ---------------- -------------------------- -------------------------- %stddev %change %stddev %change %stddev \ | \ | \ 77863 ± 0% +2.1% 79485 ± 1% +50.8% 117404 ± 0% aim7.jobs-per-min 231.63 ± 0% -2.0% 227.01 ± 1% -33.6% 153.80 ± 0% aim7.time.elapsed_time 231.63 ± 0% -2.0% 227.01 ± 1% -33.6% 153.80 ± 0% aim7.time.elapsed_time.max 896604 ± 0% -0.8% 889221 ± 3% -20.2% 715260 ± 1% aim7.time.involuntary_context_switches 2394 ± 1% +4.6% 2503 ± 1% +3.7% 2481 ± 2% aim7.time.maximum_resident_set_size 6240 ± 0% -1.5% 6145 ± 1% -14.1% 5360 ± 1% aim7.time.system_time 1111357 ± 3% +1.9% 1132509 ± 2% -6.2% 1041932 ± 2% aim7.time.voluntary_context_switches ... Signed-off-by: Chao Yu <yuchao0@huawei.com> Tested-by: Xiaolong Ye <xiaolong.ye@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-03-08 15:07:49 +03:00
{
struct f2fs_nm_info *nm_i = NM_I(sbi);
unsigned int i = 0;
nid_t nid, last_nid;
if (!enabled_nat_bits(sbi, NULL))
return;
for (i = 0; i < nm_i->nat_blocks; i++) {
i = find_next_bit_le(nm_i->empty_nat_bits, nm_i->nat_blocks, i);
if (i >= nm_i->nat_blocks)
break;
__set_bit_le(i, nm_i->nat_block_bitmap);
nid = i * NAT_ENTRY_PER_BLOCK;
last_nid = nid + NAT_ENTRY_PER_BLOCK;
f2fs: combine nat_bits and free_nid_bitmap cache Both nat_bits cache and free_nid_bitmap cache provide same functionality as a intermediate cache between free nid cache and disk, but with different granularity of indicating free nid range, and different persistence policy. nat_bits cache provides better persistence ability, and free_nid_bitmap provides better granularity. In this patch we combine advantage of both caches, so finally policy of the intermediate cache would be: - init: load free nid status from nat_bits into free_nid_bitmap - lookup: scan free_nid_bitmap before load NAT blocks - update: update free_nid_bitmap in real-time - persistence: udpate and persist nat_bits in checkpoint This patch also resolves performance regression reported by lkp-robot. commit: 4ac912427c4214d8031d9ad6fbc3bc75e71512df ("f2fs: introduce free nid bitmap") d00030cf9cd0bb96fdccc41e33d3c91dcbb672ba ("f2fs: use __set{__clear}_bit_le") 1382c0f3f9d3f936c8bc42ed1591cf7a593ef9f7 ("f2fs: combine nat_bits and free_nid_bitmap cache") 4ac912427c4214d8 d00030cf9cd0bb96fdccc41e33 1382c0f3f9d3f936c8bc42ed15 ---------------- -------------------------- -------------------------- %stddev %change %stddev %change %stddev \ | \ | \ 77863 ± 0% +2.1% 79485 ± 1% +50.8% 117404 ± 0% aim7.jobs-per-min 231.63 ± 0% -2.0% 227.01 ± 1% -33.6% 153.80 ± 0% aim7.time.elapsed_time 231.63 ± 0% -2.0% 227.01 ± 1% -33.6% 153.80 ± 0% aim7.time.elapsed_time.max 896604 ± 0% -0.8% 889221 ± 3% -20.2% 715260 ± 1% aim7.time.involuntary_context_switches 2394 ± 1% +4.6% 2503 ± 1% +3.7% 2481 ± 2% aim7.time.maximum_resident_set_size 6240 ± 0% -1.5% 6145 ± 1% -14.1% 5360 ± 1% aim7.time.system_time 1111357 ± 3% +1.9% 1132509 ± 2% -6.2% 1041932 ± 2% aim7.time.voluntary_context_switches ... Signed-off-by: Chao Yu <yuchao0@huawei.com> Tested-by: Xiaolong Ye <xiaolong.ye@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-03-08 15:07:49 +03:00
spin_lock(&NM_I(sbi)->nid_list_lock);
f2fs: combine nat_bits and free_nid_bitmap cache Both nat_bits cache and free_nid_bitmap cache provide same functionality as a intermediate cache between free nid cache and disk, but with different granularity of indicating free nid range, and different persistence policy. nat_bits cache provides better persistence ability, and free_nid_bitmap provides better granularity. In this patch we combine advantage of both caches, so finally policy of the intermediate cache would be: - init: load free nid status from nat_bits into free_nid_bitmap - lookup: scan free_nid_bitmap before load NAT blocks - update: update free_nid_bitmap in real-time - persistence: udpate and persist nat_bits in checkpoint This patch also resolves performance regression reported by lkp-robot. commit: 4ac912427c4214d8031d9ad6fbc3bc75e71512df ("f2fs: introduce free nid bitmap") d00030cf9cd0bb96fdccc41e33d3c91dcbb672ba ("f2fs: use __set{__clear}_bit_le") 1382c0f3f9d3f936c8bc42ed1591cf7a593ef9f7 ("f2fs: combine nat_bits and free_nid_bitmap cache") 4ac912427c4214d8 d00030cf9cd0bb96fdccc41e33 1382c0f3f9d3f936c8bc42ed15 ---------------- -------------------------- -------------------------- %stddev %change %stddev %change %stddev \ | \ | \ 77863 ± 0% +2.1% 79485 ± 1% +50.8% 117404 ± 0% aim7.jobs-per-min 231.63 ± 0% -2.0% 227.01 ± 1% -33.6% 153.80 ± 0% aim7.time.elapsed_time 231.63 ± 0% -2.0% 227.01 ± 1% -33.6% 153.80 ± 0% aim7.time.elapsed_time.max 896604 ± 0% -0.8% 889221 ± 3% -20.2% 715260 ± 1% aim7.time.involuntary_context_switches 2394 ± 1% +4.6% 2503 ± 1% +3.7% 2481 ± 2% aim7.time.maximum_resident_set_size 6240 ± 0% -1.5% 6145 ± 1% -14.1% 5360 ± 1% aim7.time.system_time 1111357 ± 3% +1.9% 1132509 ± 2% -6.2% 1041932 ± 2% aim7.time.voluntary_context_switches ... Signed-off-by: Chao Yu <yuchao0@huawei.com> Tested-by: Xiaolong Ye <xiaolong.ye@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-03-08 15:07:49 +03:00
for (; nid < last_nid; nid++)
update_free_nid_bitmap(sbi, nid, true, true);
spin_unlock(&NM_I(sbi)->nid_list_lock);
f2fs: combine nat_bits and free_nid_bitmap cache Both nat_bits cache and free_nid_bitmap cache provide same functionality as a intermediate cache between free nid cache and disk, but with different granularity of indicating free nid range, and different persistence policy. nat_bits cache provides better persistence ability, and free_nid_bitmap provides better granularity. In this patch we combine advantage of both caches, so finally policy of the intermediate cache would be: - init: load free nid status from nat_bits into free_nid_bitmap - lookup: scan free_nid_bitmap before load NAT blocks - update: update free_nid_bitmap in real-time - persistence: udpate and persist nat_bits in checkpoint This patch also resolves performance regression reported by lkp-robot. commit: 4ac912427c4214d8031d9ad6fbc3bc75e71512df ("f2fs: introduce free nid bitmap") d00030cf9cd0bb96fdccc41e33d3c91dcbb672ba ("f2fs: use __set{__clear}_bit_le") 1382c0f3f9d3f936c8bc42ed1591cf7a593ef9f7 ("f2fs: combine nat_bits and free_nid_bitmap cache") 4ac912427c4214d8 d00030cf9cd0bb96fdccc41e33 1382c0f3f9d3f936c8bc42ed15 ---------------- -------------------------- -------------------------- %stddev %change %stddev %change %stddev \ | \ | \ 77863 ± 0% +2.1% 79485 ± 1% +50.8% 117404 ± 0% aim7.jobs-per-min 231.63 ± 0% -2.0% 227.01 ± 1% -33.6% 153.80 ± 0% aim7.time.elapsed_time 231.63 ± 0% -2.0% 227.01 ± 1% -33.6% 153.80 ± 0% aim7.time.elapsed_time.max 896604 ± 0% -0.8% 889221 ± 3% -20.2% 715260 ± 1% aim7.time.involuntary_context_switches 2394 ± 1% +4.6% 2503 ± 1% +3.7% 2481 ± 2% aim7.time.maximum_resident_set_size 6240 ± 0% -1.5% 6145 ± 1% -14.1% 5360 ± 1% aim7.time.system_time 1111357 ± 3% +1.9% 1132509 ± 2% -6.2% 1041932 ± 2% aim7.time.voluntary_context_switches ... Signed-off-by: Chao Yu <yuchao0@huawei.com> Tested-by: Xiaolong Ye <xiaolong.ye@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-03-08 15:07:49 +03:00
}
for (i = 0; i < nm_i->nat_blocks; i++) {
i = find_next_bit_le(nm_i->full_nat_bits, nm_i->nat_blocks, i);
if (i >= nm_i->nat_blocks)
break;
__set_bit_le(i, nm_i->nat_block_bitmap);
}
}
static int init_node_manager(struct f2fs_sb_info *sbi)
{
struct f2fs_super_block *sb_raw = F2FS_RAW_SUPER(sbi);
struct f2fs_nm_info *nm_i = NM_I(sbi);
unsigned char *version_bitmap;
unsigned int nat_segs;
int err;
nm_i->nat_blkaddr = le32_to_cpu(sb_raw->nat_blkaddr);
/* segment_count_nat includes pair segment so divide to 2. */
nat_segs = le32_to_cpu(sb_raw->segment_count_nat) >> 1;
nm_i->nat_blocks = nat_segs << le32_to_cpu(sb_raw->log_blocks_per_seg);
nm_i->max_nid = NAT_ENTRY_PER_BLOCK * nm_i->nat_blocks;
/* not used nids: 0, node, meta, (and root counted as valid node) */
nm_i->available_nids = nm_i->max_nid - sbi->total_valid_node_count -
sbi->nquota_files - F2FS_RESERVED_NODE_NUM;
nm_i->nid_cnt[FREE_NID] = 0;
nm_i->nid_cnt[PREALLOC_NID] = 0;
nm_i->nat_cnt = 0;
nm_i->ram_thresh = DEF_RAM_THRESHOLD;
nm_i->ra_nid_pages = DEF_RA_NID_PAGES;
nm_i->dirty_nats_ratio = DEF_DIRTY_NAT_RATIO_THRESHOLD;
INIT_RADIX_TREE(&nm_i->free_nid_root, GFP_ATOMIC);
INIT_LIST_HEAD(&nm_i->free_nid_list);
INIT_RADIX_TREE(&nm_i->nat_root, GFP_NOIO);
INIT_RADIX_TREE(&nm_i->nat_set_root, GFP_NOIO);
INIT_LIST_HEAD(&nm_i->nat_entries);
mutex_init(&nm_i->build_lock);
spin_lock_init(&nm_i->nid_list_lock);
init_rwsem(&nm_i->nat_tree_lock);
nm_i->next_scan_nid = le32_to_cpu(sbi->ckpt->next_free_nid);
nm_i->bitmap_size = __bitmap_size(sbi, NAT_BITMAP);
version_bitmap = __bitmap_ptr(sbi, NAT_BITMAP);
if (!version_bitmap)
return -EFAULT;
nm_i->nat_bitmap = kmemdup(version_bitmap, nm_i->bitmap_size,
GFP_KERNEL);
if (!nm_i->nat_bitmap)
return -ENOMEM;
err = __get_nat_bitmaps(sbi);
if (err)
return err;
#ifdef CONFIG_F2FS_CHECK_FS
nm_i->nat_bitmap_mir = kmemdup(version_bitmap, nm_i->bitmap_size,
GFP_KERNEL);
if (!nm_i->nat_bitmap_mir)
return -ENOMEM;
#endif
return 0;
}
static int init_free_nid_cache(struct f2fs_sb_info *sbi)
{
struct f2fs_nm_info *nm_i = NM_I(sbi);
int i;
nm_i->free_nid_bitmap = f2fs_kzalloc(sbi, nm_i->nat_blocks *
sizeof(unsigned char *), GFP_KERNEL);
if (!nm_i->free_nid_bitmap)
return -ENOMEM;
for (i = 0; i < nm_i->nat_blocks; i++) {
nm_i->free_nid_bitmap[i] = f2fs_kvzalloc(sbi,
NAT_ENTRY_BITMAP_SIZE_ALIGNED, GFP_KERNEL);
if (!nm_i->free_nid_bitmap)
return -ENOMEM;
}
nm_i->nat_block_bitmap = f2fs_kvzalloc(sbi, nm_i->nat_blocks / 8,
GFP_KERNEL);
if (!nm_i->nat_block_bitmap)
return -ENOMEM;
nm_i->free_nid_count = f2fs_kvzalloc(sbi, nm_i->nat_blocks *
sizeof(unsigned short), GFP_KERNEL);
if (!nm_i->free_nid_count)
return -ENOMEM;
return 0;
}
int build_node_manager(struct f2fs_sb_info *sbi)
{
int err;
sbi->nm_info = f2fs_kzalloc(sbi, sizeof(struct f2fs_nm_info),
GFP_KERNEL);
if (!sbi->nm_info)
return -ENOMEM;
err = init_node_manager(sbi);
if (err)
return err;
err = init_free_nid_cache(sbi);
if (err)
return err;
f2fs: combine nat_bits and free_nid_bitmap cache Both nat_bits cache and free_nid_bitmap cache provide same functionality as a intermediate cache between free nid cache and disk, but with different granularity of indicating free nid range, and different persistence policy. nat_bits cache provides better persistence ability, and free_nid_bitmap provides better granularity. In this patch we combine advantage of both caches, so finally policy of the intermediate cache would be: - init: load free nid status from nat_bits into free_nid_bitmap - lookup: scan free_nid_bitmap before load NAT blocks - update: update free_nid_bitmap in real-time - persistence: udpate and persist nat_bits in checkpoint This patch also resolves performance regression reported by lkp-robot. commit: 4ac912427c4214d8031d9ad6fbc3bc75e71512df ("f2fs: introduce free nid bitmap") d00030cf9cd0bb96fdccc41e33d3c91dcbb672ba ("f2fs: use __set{__clear}_bit_le") 1382c0f3f9d3f936c8bc42ed1591cf7a593ef9f7 ("f2fs: combine nat_bits and free_nid_bitmap cache") 4ac912427c4214d8 d00030cf9cd0bb96fdccc41e33 1382c0f3f9d3f936c8bc42ed15 ---------------- -------------------------- -------------------------- %stddev %change %stddev %change %stddev \ | \ | \ 77863 ± 0% +2.1% 79485 ± 1% +50.8% 117404 ± 0% aim7.jobs-per-min 231.63 ± 0% -2.0% 227.01 ± 1% -33.6% 153.80 ± 0% aim7.time.elapsed_time 231.63 ± 0% -2.0% 227.01 ± 1% -33.6% 153.80 ± 0% aim7.time.elapsed_time.max 896604 ± 0% -0.8% 889221 ± 3% -20.2% 715260 ± 1% aim7.time.involuntary_context_switches 2394 ± 1% +4.6% 2503 ± 1% +3.7% 2481 ± 2% aim7.time.maximum_resident_set_size 6240 ± 0% -1.5% 6145 ± 1% -14.1% 5360 ± 1% aim7.time.system_time 1111357 ± 3% +1.9% 1132509 ± 2% -6.2% 1041932 ± 2% aim7.time.voluntary_context_switches ... Signed-off-by: Chao Yu <yuchao0@huawei.com> Tested-by: Xiaolong Ye <xiaolong.ye@intel.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2017-03-08 15:07:49 +03:00
/* load free nid status from nat_bits table */
load_free_nid_bitmap(sbi);
build_free_nids(sbi, true, true);
return 0;
}
void destroy_node_manager(struct f2fs_sb_info *sbi)
{
struct f2fs_nm_info *nm_i = NM_I(sbi);
struct free_nid *i, *next_i;
struct nat_entry *natvec[NATVEC_SIZE];
struct nat_entry_set *setvec[SETVEC_SIZE];
nid_t nid = 0;
unsigned int found;
if (!nm_i)
return;
/* destroy free nid list */
spin_lock(&nm_i->nid_list_lock);
list_for_each_entry_safe(i, next_i, &nm_i->free_nid_list, list) {
__remove_free_nid(sbi, i, FREE_NID);
spin_unlock(&nm_i->nid_list_lock);
kmem_cache_free(free_nid_slab, i);
spin_lock(&nm_i->nid_list_lock);
}
f2fs_bug_on(sbi, nm_i->nid_cnt[FREE_NID]);
f2fs_bug_on(sbi, nm_i->nid_cnt[PREALLOC_NID]);
f2fs_bug_on(sbi, !list_empty(&nm_i->free_nid_list));
spin_unlock(&nm_i->nid_list_lock);
/* destroy nat cache */
down_write(&nm_i->nat_tree_lock);
while ((found = __gang_lookup_nat_cache(nm_i,
nid, NATVEC_SIZE, natvec))) {
unsigned idx;
nid = nat_get_nid(natvec[found - 1]) + 1;
for (idx = 0; idx < found; idx++)
__del_from_nat_cache(nm_i, natvec[idx]);
}
f2fs_bug_on(sbi, nm_i->nat_cnt);
/* destroy nat set cache */
nid = 0;
while ((found = __gang_lookup_nat_set(nm_i,
nid, SETVEC_SIZE, setvec))) {
unsigned idx;
nid = setvec[found - 1]->set + 1;
for (idx = 0; idx < found; idx++) {
/* entry_cnt is not zero, when cp_error was occurred */
f2fs_bug_on(sbi, !list_empty(&setvec[idx]->entry_list));
radix_tree_delete(&nm_i->nat_set_root, setvec[idx]->set);
kmem_cache_free(nat_entry_set_slab, setvec[idx]);
}
}
up_write(&nm_i->nat_tree_lock);
kvfree(nm_i->nat_block_bitmap);
if (nm_i->free_nid_bitmap) {
int i;
for (i = 0; i < nm_i->nat_blocks; i++)
kvfree(nm_i->free_nid_bitmap[i]);
kfree(nm_i->free_nid_bitmap);
}
kvfree(nm_i->free_nid_count);
kfree(nm_i->nat_bitmap);
kfree(nm_i->nat_bits);
#ifdef CONFIG_F2FS_CHECK_FS
kfree(nm_i->nat_bitmap_mir);
#endif
sbi->nm_info = NULL;
kfree(nm_i);
}
int __init create_node_manager_caches(void)
{
nat_entry_slab = f2fs_kmem_cache_create("nat_entry",
sizeof(struct nat_entry));
if (!nat_entry_slab)
f2fs: refactor flush_nat_entries codes for reducing NAT writes Although building NAT journal in cursum reduce the read/write work for NAT block, but previous design leave us lower performance when write checkpoint frequently for these cases: 1. if journal in cursum has already full, it's a bit of waste that we flush all nat entries to page for persistence, but not to cache any entries. 2. if journal in cursum is not full, we fill nat entries to journal util journal is full, then flush the left dirty entries to disk without merge journaled entries, so these journaled entries may be flushed to disk at next checkpoint but lost chance to flushed last time. In this patch we merge dirty entries located in same NAT block to nat entry set, and linked all set to list, sorted ascending order by entries' count of set. Later we flush entries in sparse set into journal as many as we can, and then flush merged entries to disk. In this way we can not only gain in performance, but also save lifetime of flash device. In my testing environment, it shows this patch can help to reduce NAT block writes obviously. In hard disk test case: cost time of fsstress is stablely reduced by about 5%. 1. virtual machine + hard disk: fsstress -p 20 -n 200 -l 5 node num cp count nodes/cp based 4599.6 1803.0 2.551 patched 2714.6 1829.6 1.483 2. virtual machine + 32g micro SD card: fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0 -f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5 -f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S node num cp count nodes/cp based 84.5 43.7 1.933 patched 49.2 40.0 1.23 Our latency of merging op shows not bad when handling extreme case like: merging a great number of dirty nats: latency(ns) dirty nat count 3089219 24922 5129423 27422 4000250 24523 change log from v1: o fix wrong logic in add_nat_entry when grab a new nat entry set. o swith to create slab cache in create_node_manager_caches. o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency. change log from v2: o make comment position more appropriate suggested by Jaegeuk Kim. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
goto fail;
free_nid_slab = f2fs_kmem_cache_create("free_nid",
sizeof(struct free_nid));
f2fs: refactor flush_nat_entries codes for reducing NAT writes Although building NAT journal in cursum reduce the read/write work for NAT block, but previous design leave us lower performance when write checkpoint frequently for these cases: 1. if journal in cursum has already full, it's a bit of waste that we flush all nat entries to page for persistence, but not to cache any entries. 2. if journal in cursum is not full, we fill nat entries to journal util journal is full, then flush the left dirty entries to disk without merge journaled entries, so these journaled entries may be flushed to disk at next checkpoint but lost chance to flushed last time. In this patch we merge dirty entries located in same NAT block to nat entry set, and linked all set to list, sorted ascending order by entries' count of set. Later we flush entries in sparse set into journal as many as we can, and then flush merged entries to disk. In this way we can not only gain in performance, but also save lifetime of flash device. In my testing environment, it shows this patch can help to reduce NAT block writes obviously. In hard disk test case: cost time of fsstress is stablely reduced by about 5%. 1. virtual machine + hard disk: fsstress -p 20 -n 200 -l 5 node num cp count nodes/cp based 4599.6 1803.0 2.551 patched 2714.6 1829.6 1.483 2. virtual machine + 32g micro SD card: fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0 -f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5 -f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S node num cp count nodes/cp based 84.5 43.7 1.933 patched 49.2 40.0 1.23 Our latency of merging op shows not bad when handling extreme case like: merging a great number of dirty nats: latency(ns) dirty nat count 3089219 24922 5129423 27422 4000250 24523 change log from v1: o fix wrong logic in add_nat_entry when grab a new nat entry set. o swith to create slab cache in create_node_manager_caches. o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency. change log from v2: o make comment position more appropriate suggested by Jaegeuk Kim. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
if (!free_nid_slab)
goto destroy_nat_entry;
f2fs: refactor flush_nat_entries codes for reducing NAT writes Although building NAT journal in cursum reduce the read/write work for NAT block, but previous design leave us lower performance when write checkpoint frequently for these cases: 1. if journal in cursum has already full, it's a bit of waste that we flush all nat entries to page for persistence, but not to cache any entries. 2. if journal in cursum is not full, we fill nat entries to journal util journal is full, then flush the left dirty entries to disk without merge journaled entries, so these journaled entries may be flushed to disk at next checkpoint but lost chance to flushed last time. In this patch we merge dirty entries located in same NAT block to nat entry set, and linked all set to list, sorted ascending order by entries' count of set. Later we flush entries in sparse set into journal as many as we can, and then flush merged entries to disk. In this way we can not only gain in performance, but also save lifetime of flash device. In my testing environment, it shows this patch can help to reduce NAT block writes obviously. In hard disk test case: cost time of fsstress is stablely reduced by about 5%. 1. virtual machine + hard disk: fsstress -p 20 -n 200 -l 5 node num cp count nodes/cp based 4599.6 1803.0 2.551 patched 2714.6 1829.6 1.483 2. virtual machine + 32g micro SD card: fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0 -f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5 -f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S node num cp count nodes/cp based 84.5 43.7 1.933 patched 49.2 40.0 1.23 Our latency of merging op shows not bad when handling extreme case like: merging a great number of dirty nats: latency(ns) dirty nat count 3089219 24922 5129423 27422 4000250 24523 change log from v1: o fix wrong logic in add_nat_entry when grab a new nat entry set. o swith to create slab cache in create_node_manager_caches. o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency. change log from v2: o make comment position more appropriate suggested by Jaegeuk Kim. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
nat_entry_set_slab = f2fs_kmem_cache_create("nat_entry_set",
sizeof(struct nat_entry_set));
if (!nat_entry_set_slab)
goto destroy_free_nid;
return 0;
f2fs: refactor flush_nat_entries codes for reducing NAT writes Although building NAT journal in cursum reduce the read/write work for NAT block, but previous design leave us lower performance when write checkpoint frequently for these cases: 1. if journal in cursum has already full, it's a bit of waste that we flush all nat entries to page for persistence, but not to cache any entries. 2. if journal in cursum is not full, we fill nat entries to journal util journal is full, then flush the left dirty entries to disk without merge journaled entries, so these journaled entries may be flushed to disk at next checkpoint but lost chance to flushed last time. In this patch we merge dirty entries located in same NAT block to nat entry set, and linked all set to list, sorted ascending order by entries' count of set. Later we flush entries in sparse set into journal as many as we can, and then flush merged entries to disk. In this way we can not only gain in performance, but also save lifetime of flash device. In my testing environment, it shows this patch can help to reduce NAT block writes obviously. In hard disk test case: cost time of fsstress is stablely reduced by about 5%. 1. virtual machine + hard disk: fsstress -p 20 -n 200 -l 5 node num cp count nodes/cp based 4599.6 1803.0 2.551 patched 2714.6 1829.6 1.483 2. virtual machine + 32g micro SD card: fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0 -f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5 -f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S node num cp count nodes/cp based 84.5 43.7 1.933 patched 49.2 40.0 1.23 Our latency of merging op shows not bad when handling extreme case like: merging a great number of dirty nats: latency(ns) dirty nat count 3089219 24922 5129423 27422 4000250 24523 change log from v1: o fix wrong logic in add_nat_entry when grab a new nat entry set. o swith to create slab cache in create_node_manager_caches. o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency. change log from v2: o make comment position more appropriate suggested by Jaegeuk Kim. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
destroy_free_nid:
f2fs: refactor flush_nat_entries codes for reducing NAT writes Although building NAT journal in cursum reduce the read/write work for NAT block, but previous design leave us lower performance when write checkpoint frequently for these cases: 1. if journal in cursum has already full, it's a bit of waste that we flush all nat entries to page for persistence, but not to cache any entries. 2. if journal in cursum is not full, we fill nat entries to journal util journal is full, then flush the left dirty entries to disk without merge journaled entries, so these journaled entries may be flushed to disk at next checkpoint but lost chance to flushed last time. In this patch we merge dirty entries located in same NAT block to nat entry set, and linked all set to list, sorted ascending order by entries' count of set. Later we flush entries in sparse set into journal as many as we can, and then flush merged entries to disk. In this way we can not only gain in performance, but also save lifetime of flash device. In my testing environment, it shows this patch can help to reduce NAT block writes obviously. In hard disk test case: cost time of fsstress is stablely reduced by about 5%. 1. virtual machine + hard disk: fsstress -p 20 -n 200 -l 5 node num cp count nodes/cp based 4599.6 1803.0 2.551 patched 2714.6 1829.6 1.483 2. virtual machine + 32g micro SD card: fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0 -f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5 -f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S node num cp count nodes/cp based 84.5 43.7 1.933 patched 49.2 40.0 1.23 Our latency of merging op shows not bad when handling extreme case like: merging a great number of dirty nats: latency(ns) dirty nat count 3089219 24922 5129423 27422 4000250 24523 change log from v1: o fix wrong logic in add_nat_entry when grab a new nat entry set. o swith to create slab cache in create_node_manager_caches. o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency. change log from v2: o make comment position more appropriate suggested by Jaegeuk Kim. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
kmem_cache_destroy(free_nid_slab);
destroy_nat_entry:
f2fs: refactor flush_nat_entries codes for reducing NAT writes Although building NAT journal in cursum reduce the read/write work for NAT block, but previous design leave us lower performance when write checkpoint frequently for these cases: 1. if journal in cursum has already full, it's a bit of waste that we flush all nat entries to page for persistence, but not to cache any entries. 2. if journal in cursum is not full, we fill nat entries to journal util journal is full, then flush the left dirty entries to disk without merge journaled entries, so these journaled entries may be flushed to disk at next checkpoint but lost chance to flushed last time. In this patch we merge dirty entries located in same NAT block to nat entry set, and linked all set to list, sorted ascending order by entries' count of set. Later we flush entries in sparse set into journal as many as we can, and then flush merged entries to disk. In this way we can not only gain in performance, but also save lifetime of flash device. In my testing environment, it shows this patch can help to reduce NAT block writes obviously. In hard disk test case: cost time of fsstress is stablely reduced by about 5%. 1. virtual machine + hard disk: fsstress -p 20 -n 200 -l 5 node num cp count nodes/cp based 4599.6 1803.0 2.551 patched 2714.6 1829.6 1.483 2. virtual machine + 32g micro SD card: fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0 -f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5 -f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S node num cp count nodes/cp based 84.5 43.7 1.933 patched 49.2 40.0 1.23 Our latency of merging op shows not bad when handling extreme case like: merging a great number of dirty nats: latency(ns) dirty nat count 3089219 24922 5129423 27422 4000250 24523 change log from v1: o fix wrong logic in add_nat_entry when grab a new nat entry set. o swith to create slab cache in create_node_manager_caches. o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency. change log from v2: o make comment position more appropriate suggested by Jaegeuk Kim. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
kmem_cache_destroy(nat_entry_slab);
fail:
return -ENOMEM;
}
void destroy_node_manager_caches(void)
{
f2fs: refactor flush_nat_entries codes for reducing NAT writes Although building NAT journal in cursum reduce the read/write work for NAT block, but previous design leave us lower performance when write checkpoint frequently for these cases: 1. if journal in cursum has already full, it's a bit of waste that we flush all nat entries to page for persistence, but not to cache any entries. 2. if journal in cursum is not full, we fill nat entries to journal util journal is full, then flush the left dirty entries to disk without merge journaled entries, so these journaled entries may be flushed to disk at next checkpoint but lost chance to flushed last time. In this patch we merge dirty entries located in same NAT block to nat entry set, and linked all set to list, sorted ascending order by entries' count of set. Later we flush entries in sparse set into journal as many as we can, and then flush merged entries to disk. In this way we can not only gain in performance, but also save lifetime of flash device. In my testing environment, it shows this patch can help to reduce NAT block writes obviously. In hard disk test case: cost time of fsstress is stablely reduced by about 5%. 1. virtual machine + hard disk: fsstress -p 20 -n 200 -l 5 node num cp count nodes/cp based 4599.6 1803.0 2.551 patched 2714.6 1829.6 1.483 2. virtual machine + 32g micro SD card: fsstress -p 20 -n 200 -l 1 -w -f chown=0 -f creat=4 -f dwrite=0 -f fdatasync=4 -f fsync=4 -f link=0 -f mkdir=4 -f mknod=4 -f rename=5 -f rmdir=5 -f symlink=0 -f truncate=4 -f unlink=5 -f write=0 -S node num cp count nodes/cp based 84.5 43.7 1.933 patched 49.2 40.0 1.23 Our latency of merging op shows not bad when handling extreme case like: merging a great number of dirty nats: latency(ns) dirty nat count 3089219 24922 5129423 27422 4000250 24523 change log from v1: o fix wrong logic in add_nat_entry when grab a new nat entry set. o swith to create slab cache in create_node_manager_caches. o use GFP_ATOMIC instead of GFP_NOFS to avoid potential long latency. change log from v2: o make comment position more appropriate suggested by Jaegeuk Kim. Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
2014-06-24 05:18:20 +04:00
kmem_cache_destroy(nat_entry_set_slab);
kmem_cache_destroy(free_nid_slab);
kmem_cache_destroy(nat_entry_slab);
}