WSL2-Linux-Kernel/drivers/iio/health/Kconfig

#
# Health sensors
#
# When adding new entries keep the list in alphabetical order

menu "Health Sensors"

menu "Heart Rate Monitors"

config AFE4403
	tristate "TI AFE4403 Heart Rate Monitor"
	depends on SPI_MASTER
	select REGMAP_SPI
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	  Say yes to choose the Texas Instruments AFE4403
	  heart rate monitor and low-cost pulse oximeter.

	  To compile this driver as a module, choose M here: the
	  module will be called afe4403.

config AFE4404
	tristate "TI AFE4404 heart rate and pulse oximeter sensor"
	depends on I2C
	select REGMAP_I2C
	select IIO_BUFFER
	select IIO_TRIGGERED_BUFFER
	help
	  Say yes to choose the Texas Instruments AFE4404
	  heart rate monitor and low-cost pulse oximeter.

	  To compile this driver as a module, choose M here: the
	  module will be called afe4404.

config MAX30100
	tristate "MAX30100 heart rate and pulse oximeter sensor"
	depends on I2C
	select REGMAP_I2C
	select IIO_BUFFER
	select IIO_KFIFO_BUF
	help
	  Say Y here to build I2C interface support for the Maxim
	  MAX30100 heart rate, and pulse oximeter sensor.

	  To compile this driver as a module, choose M here: the
	  module will be called max30100.

config MAX30102
	tristate "MAX30102 heart rate and pulse oximeter sensor"
	depends on I2C
	select REGMAP_I2C
	select IIO_BUFFER
	select IIO_KFIFO_BUF
	help
	  Say Y here to build I2C interface support for the Maxim
	  MAX30102 heart rate, and pulse oximeter sensor.

	  To compile this driver as a module, choose M here: the
	  module will be called max30102.

endmenu

endmenu
iio: light: add MAX30100 oximeter driver support MAX30100 is an heart rate and pulse oximeter sensor that works using two LEDS of different wavelengths, and detecting the light reflected back. This patchset adds support for both IR and RED LED channels which can be processed in userspace to determine heart rate and blood oxygen levels. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2015-12-10 09:04:49 +03:00			`#`
			`# Health sensors`
			`#`
			`# When adding new entries keep the list in alphabetical order`

iio: health: Add driver for the TI AFE4404 heart monitor Add driver for the TI AFE4404 heart rate monitor and pulse oximeter. This device detects reflected LED light fluctuations and presents an ADC value to the user space for further signal processing. Datasheet: http://www.ti.com/product/AFE4404/datasheet Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2016-02-02 20:50:44 +03:00			`menu "Health Sensors"`

			`menu "Heart Rate Monitors"`

iio: health: Add driver for the TI AFE4403 heart monitor Add driver for the TI AFE4403 heart rate monitor and pulse oximeter. This device detects reflected LED light fluctuations and presents an ADC value to the user space for further signal processing. Data sheet located here: http://www.ti.com/product/AFE4403/datasheet Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2016-02-06 22:35:21 +03:00			`config AFE4403`
			`tristate "TI AFE4403 Heart Rate Monitor"`
			`depends on SPI_MASTER`
iio: health/afe4403: select REGMAP_SPI The newly added afe4403 driver uses the regmap facility to abstract the I2C and SPI access. However, it fails to ensure that regmap_spi is actually present: drivers/iio/built-in.o: In function `afe4403_probe': :(.text+0x9bf8): undefined reference to `__devm_regmap_init_spi' This adds a Kconfig select statement like the afe4404 I2C driver has. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: eec96d1e2d31 ("iio: health: Add driver for the TI AFE4403 heart monitor") Acked-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2016-02-16 18:52:15 +03:00			`select REGMAP_SPI`
iio: health: Add driver for the TI AFE4403 heart monitor Add driver for the TI AFE4403 heart rate monitor and pulse oximeter. This device detects reflected LED light fluctuations and presents an ADC value to the user space for further signal processing. Data sheet located here: http://www.ti.com/product/AFE4403/datasheet Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2016-02-06 22:35:21 +03:00			`select IIO_BUFFER`
			`select IIO_TRIGGERED_BUFFER`
			`help`
			`Say yes to choose the Texas Instruments AFE4403`
			`heart rate monitor and low-cost pulse oximeter.`

			`To compile this driver as a module, choose M here: the`
			`module will be called afe4403.`

iio: health: Add driver for the TI AFE4404 heart monitor Add driver for the TI AFE4404 heart rate monitor and pulse oximeter. This device detects reflected LED light fluctuations and presents an ADC value to the user space for further signal processing. Datasheet: http://www.ti.com/product/AFE4404/datasheet Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2016-02-02 20:50:44 +03:00			`config AFE4404`
			`tristate "TI AFE4404 heart rate and pulse oximeter sensor"`
			`depends on I2C`
			`select REGMAP_I2C`
			`select IIO_BUFFER`
			`select IIO_TRIGGERED_BUFFER`
			`help`
			`Say yes to choose the Texas Instruments AFE4404`
			`heart rate monitor and low-cost pulse oximeter.`

			`To compile this driver as a module, choose M here: the`
			`module will be called afe4404.`
iio: light: add MAX30100 oximeter driver support MAX30100 is an heart rate and pulse oximeter sensor that works using two LEDS of different wavelengths, and detecting the light reflected back. This patchset adds support for both IR and RED LED channels which can be processed in userspace to determine heart rate and blood oxygen levels. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2015-12-10 09:04:49 +03:00
			`config MAX30100`
			`tristate "MAX30100 heart rate and pulse oximeter sensor"`
			`depends on I2C`
			`select REGMAP_I2C`
			`select IIO_BUFFER`
			`select IIO_KFIFO_BUF`
			`help`
			`Say Y here to build I2C interface support for the Maxim`
			`MAX30100 heart rate, and pulse oximeter sensor.`

			`To compile this driver as a module, choose M here: the`
			`module will be called max30100.`

iio: health: add MAX30102 oximeter driver support MAX30102 is an heart rate and pulse oximeter sensor that works using two LEDS of different wavelengths, and detecting the light reflected back. This patchset adds support for both IR and RED LED channels which can be processed in userspace to determine heart rate and blood oxygen levels. The MAX30102 part isn't completely register and functional compatible with the existing MAX30100 driver. Signed-off-by: Matt Ranostay <matt@ranostay.consulting> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2017-02-04 13:22:51 +03:00			`config MAX30102`
			`tristate "MAX30102 heart rate and pulse oximeter sensor"`
			`depends on I2C`
			`select REGMAP_I2C`
			`select IIO_BUFFER`
			`select IIO_KFIFO_BUF`
			`help`
			`Say Y here to build I2C interface support for the Maxim`
			`MAX30102 heart rate, and pulse oximeter sensor.`

			`To compile this driver as a module, choose M here: the`
			`module will be called max30102.`

iio: light: add MAX30100 oximeter driver support MAX30100 is an heart rate and pulse oximeter sensor that works using two LEDS of different wavelengths, and detecting the light reflected back. This patchset adds support for both IR and RED LED channels which can be processed in userspace to determine heart rate and blood oxygen levels. Signed-off-by: Matt Ranostay <mranostay@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2015-12-10 09:04:49 +03:00			`endmenu`
iio: health: Add driver for the TI AFE4404 heart monitor Add driver for the TI AFE4404 heart rate monitor and pulse oximeter. This device detects reflected LED light fluctuations and presents an ADC value to the user space for further signal processing. Datasheet: http://www.ti.com/product/AFE4404/datasheet Signed-off-by: Andrew F. Davis <afd@ti.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org> 2016-02-02 20:50:44 +03:00
			`endmenu`