WSL2-Linux-Kernel/arch/arm64/kernel/Makefile

68 строки
2.5 KiB
Makefile
Исходник Обычный вид История

#
# Makefile for the linux kernel.
#
CPPFLAGS_vmlinux.lds := -DTEXT_OFFSET=$(TEXT_OFFSET)
AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
CFLAGS_armv8_deprecated.o := -I$(src)
CFLAGS_REMOVE_ftrace.o = -pg
CFLAGS_REMOVE_insn.o = -pg
CFLAGS_REMOVE_return_address.o = -pg
CFLAGS_setup.o = -DUTS_MACHINE='"$(UTS_MACHINE)"'
# Object file lists.
arm64-obj-y := debug-monitors.o entry.o irq.o fpsimd.o \
entry-fpsimd.o process.o ptrace.o setup.o signal.o \
sys.o stacktrace.o time.o traps.o io.o vdso.o \
hyp-stub.o psci.o cpu_ops.o insn.o \
return_address.o cpuinfo.o cpu_errata.o \
cpufeature.o alternative.o cacheinfo.o \
smp.o smp_spin_table.o topology.o smccc-call.o
extra-$(CONFIG_EFI) := efi-entry.o
OBJCOPYFLAGS := --prefix-symbols=__efistub_
$(obj)/%.stub.o: $(obj)/%.o FORCE
$(call if_changed,objcopy)
arm64-obj-$(CONFIG_COMPAT) += sys32.o kuser32.o signal32.o \
sys_compat.o entry32.o
arm64-obj-$(CONFIG_FUNCTION_TRACER) += ftrace.o entry-ftrace.o
arm64-obj-$(CONFIG_MODULES) += arm64ksyms.o module.o
arm64-obj-$(CONFIG_ARM64_MODULE_PLTS) += module-plts.o
arm64-obj-$(CONFIG_PERF_EVENTS) += perf_regs.o perf_callchain.o
arm64-obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o
arm64-obj-$(CONFIG_HAVE_HW_BREAKPOINT) += hw_breakpoint.o
arm64: kernel: remove ARM64_CPU_SUSPEND config option ARM64_CPU_SUSPEND config option was introduced to make code providing context save/restore selectable only on platforms requiring power management capabilities. Currently ARM64_CPU_SUSPEND depends on the PM_SLEEP config option which in turn is set by the SUSPEND config option. The introduction of CPU_IDLE for arm64 requires that code configured by ARM64_CPU_SUSPEND (context save/restore) should be compiled in in order to enable the CPU idle driver to rely on CPU operations carrying out context save/restore. The ARM64_CPUIDLE config option (ARM64 generic idle driver) is therefore forced to select ARM64_CPU_SUSPEND, even if there may be (ie PM_SLEEP) failed dependencies, which is not a clean way of handling the kernel configuration option. For these reasons, this patch removes the ARM64_CPU_SUSPEND config option and makes the context save/restore dependent on CPU_PM, which is selected whenever either SUSPEND or CPU_IDLE are configured, cleaning up dependencies in the process. This way, code previously configured through ARM64_CPU_SUSPEND is compiled in whenever a power management subsystem requires it to be present in the kernel (SUSPEND || CPU_IDLE), which is the behaviour expected on ARM64 kernels. The cpu_suspend and cpu_init_idle CPU operations are added only if CPU_IDLE is selected, since they are CPU_IDLE specific methods and should be grouped and defined accordingly. PSCI CPU operations are updated to reflect the introduced changes. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Will Deacon <will.deacon@arm.com> Cc: Krzysztof Kozlowski <k.kozlowski@samsung.com> Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2015-01-26 21:33:44 +03:00
arm64-obj-$(CONFIG_CPU_PM) += sleep.o suspend.o
arm64-obj-$(CONFIG_CPU_IDLE) += cpuidle.o
arm64-obj-$(CONFIG_JUMP_LABEL) += jump_label.o
arm64-obj-$(CONFIG_KGDB) += kgdb.o
arm64-obj-$(CONFIG_EFI) += efi.o efi-entry.stub.o
arm64-obj-$(CONFIG_PCI) += pci.o
arm64-obj-$(CONFIG_ARMV8_DEPRECATED) += armv8_deprecated.o
ARM64 / ACPI: Get RSDP and ACPI boot-time tables As we want to get ACPI tables to parse and then use the information for system initialization, we should get the RSDP (Root System Description Pointer) first, it then locates Extended Root Description Table (XSDT) which contains all the 64-bit physical address that pointer to other boot-time tables. Introduce acpi.c and its related head file in this patch to provide fundamental needs of extern variables and functions for ACPI core, and then get boot-time tables as needed. - asm/acenv.h for arch specific ACPICA environments and implementation, It is needed unconditionally by ACPI core; - asm/acpi.h for arch specific variables and functions needed by ACPI driver core; - acpi.c for ARM64 related ACPI implementation for ACPI driver core; acpi_boot_table_init() is introduced to get RSDP and boot-time tables, it will be called in setup_arch() before paging_init(), so we should use eary_memremap() mechanism here to get the RSDP and all the table pointers. FADT Major.Minor version was introduced in ACPI 5.1, it is the same as ACPI version. In ACPI 5.1, some major gaps are fixed for ARM, such as updates in MADT table for GIC and SMP init, without those updates, we can not get the MPIDR for SMP init, and GICv2/3 related init information, so we can't boot arm64 ACPI properly with table versions predating 5.1. If firmware provides ACPI tables with ACPI version less than 5.1, OS has no way to retrieve the configuration data that is necessary to init SMP boot protocol and the GIC properly, so disable ACPI if we get an FADT table with version less that 5.1 when acpi_boot_table_init() called. CC: Catalin Marinas <catalin.marinas@arm.com> CC: Will Deacon <will.deacon@arm.com> CC: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Tested-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> Tested-by: Yijing Wang <wangyijing@huawei.com> Tested-by: Mark Langsdorf <mlangsdo@redhat.com> Tested-by: Jon Masters <jcm@redhat.com> Tested-by: Timur Tabi <timur@codeaurora.org> Tested-by: Robert Richter <rrichter@cavium.com> Acked-by: Robert Richter <rrichter@cavium.com> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Al Stone <al.stone@linaro.org> Signed-off-by: Graeme Gregory <graeme.gregory@linaro.org> Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-24 17:02:37 +03:00
arm64-obj-$(CONFIG_ACPI) += acpi.o
arm64-obj-$(CONFIG_ACPI_NUMA) += acpi_numa.o
arm64: kernel: implement ACPI parking protocol The SBBR and ACPI specifications allow ACPI based systems that do not implement PSCI (eg systems with no EL3) to boot through the ACPI parking protocol specification[1]. This patch implements the ACPI parking protocol CPU operations, and adds code that eases parsing the parking protocol data structures to the ARM64 SMP initializion carried out at the same time as cpus enumeration. To wake-up the CPUs from the parked state, this patch implements a wakeup IPI for ARM64 (ie arch_send_wakeup_ipi_mask()) that mirrors the ARM one, so that a specific IPI is sent for wake-up purpose in order to distinguish it from other IPI sources. Given the current ACPI MADT parsing API, the patch implements a glue layer that helps passing MADT GICC data structure from SMP initialization code to the parking protocol implementation somewhat overriding the CPU operations interfaces. This to avoid creating a completely trasparent DT/ACPI CPU operations layer that would require creating opaque structure handling for CPUs data (DT represents CPU through DT nodes, ACPI through static MADT table entries), which seems overkill given that ACPI on ARM64 mandates only two booting protocols (PSCI and parking protocol), so there is no need for further protocol additions. Based on the original work by Mark Salter <msalter@redhat.com> [1] https://acpica.org/sites/acpica/files/MP%20Startup%20for%20ARM%20platforms.docx Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Tested-by: Loc Ho <lho@apm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Hanjun Guo <hanjun.guo@linaro.org> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mark Salter <msalter@redhat.com> Cc: Al Stone <ahs3@redhat.com> [catalin.marinas@arm.com: Added WARN_ONCE(!acpi_parking_protocol_valid() on the IPI] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-26 14:10:38 +03:00
arm64-obj-$(CONFIG_ARM64_ACPI_PARKING_PROTOCOL) += acpi_parking_protocol.o
arm64-obj-$(CONFIG_PARAVIRT) += paravirt.o
arm64: add support for kernel ASLR This adds support for KASLR is implemented, based on entropy provided by the bootloader in the /chosen/kaslr-seed DT property. Depending on the size of the address space (VA_BITS) and the page size, the entropy in the virtual displacement is up to 13 bits (16k/2 levels) and up to 25 bits (all 4 levels), with the sidenote that displacements that result in the kernel image straddling a 1GB/32MB/512MB alignment boundary (for 4KB/16KB/64KB granule kernels, respectively) are not allowed, and will be rounded up to an acceptable value. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is enabled, the module region is randomized independently from the core kernel. This makes it less likely that the location of core kernel data structures can be determined by an adversary, but causes all function calls from modules into the core kernel to be resolved via entries in the module PLTs. If CONFIG_RANDOMIZE_MODULE_REGION_FULL is not enabled, the module region is randomized by choosing a page aligned 128 MB region inside the interval [_etext - 128 MB, _stext + 128 MB). This gives between 10 and 14 bits of entropy (depending on page size), independently of the kernel randomization, but still guarantees that modules are within the range of relative branch and jump instructions (with the caveat that, since the module region is shared with other uses of the vmalloc area, modules may need to be loaded further away if the module region is exhausted) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-01-26 16:12:01 +03:00
arm64-obj-$(CONFIG_RANDOMIZE_BASE) += kaslr.o
arm64-obj-$(CONFIG_HIBERNATION) += hibernate.o hibernate-asm.o
arm64-obj-$(CONFIG_KEXEC) += machine_kexec.o relocate_kernel.o \
cpu-reset.o
arm64-obj-$(CONFIG_ARM64_RELOC_TEST) += arm64-reloc-test.o
arm64-reloc-test-y := reloc_test_core.o reloc_test_syms.o
arm64-obj-$(CONFIG_CRASH_DUMP) += crash_dump.o
arm64: Kprobes with single stepping support Add support for basic kernel probes(kprobes) and jump probes (jprobes) for ARM64. Kprobes utilizes software breakpoint and single step debug exceptions supported on ARM v8. A software breakpoint is placed at the probe address to trap the kernel execution into the kprobe handler. ARM v8 supports enabling single stepping before the break exception return (ERET), with next PC in exception return address (ELR_EL1). The kprobe handler prepares an executable memory slot for out-of-line execution with a copy of the original instruction being probed, and enables single stepping. The PC is set to the out-of-line slot address before the ERET. With this scheme, the instruction is executed with the exact same register context except for the PC (and DAIF) registers. Debug mask (PSTATE.D) is enabled only when single stepping a recursive kprobe, e.g.: during kprobes reenter so that probed instruction can be single stepped within the kprobe handler -exception- context. The recursion depth of kprobe is always 2, i.e. upon probe re-entry, any further re-entry is prevented by not calling handlers and the case counted as a missed kprobe). Single stepping from the x-o-l slot has a drawback for PC-relative accesses like branching and symbolic literals access as the offset from the new PC (slot address) may not be ensured to fit in the immediate value of the opcode. Such instructions need simulation, so reject probing them. Instructions generating exceptions or cpu mode change are rejected for probing. Exclusive load/store instructions are rejected too. Additionally, the code is checked to see if it is inside an exclusive load/store sequence (code from Pratyush). System instructions are mostly enabled for stepping, except MSR/MRS accesses to "DAIF" flags in PSTATE, which are not safe for probing. This also changes arch/arm64/include/asm/ptrace.h to use include/asm-generic/ptrace.h. Thanks to Steve Capper and Pratyush Anand for several suggested Changes. Signed-off-by: Sandeepa Prabhu <sandeepa.s.prabhu@gmail.com> Signed-off-by: David A. Long <dave.long@linaro.org> Signed-off-by: Pratyush Anand <panand@redhat.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2016-07-08 19:35:48 +03:00
obj-y += $(arm64-obj-y) vdso/ probes/
obj-m += $(arm64-obj-m)
head-y := head.o
extra-y += $(head-y) vmlinux.lds
ifeq ($(CONFIG_DEBUG_EFI),y)
AFLAGS_head.o += -DVMLINUX_PATH="\"$(realpath $(objtree)/vmlinux)\""
endif
# will be included by each individual module but not by the core kernel itself
extra-$(CONFIG_DYNAMIC_FTRACE) += ftrace-mod.o