WSL2-Linux-Kernel/fs/userfaultfd.c

2111 строки
54 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0-only
/*
* fs/userfaultfd.c
*
* Copyright (C) 2007 Davide Libenzi <davidel@xmailserver.org>
* Copyright (C) 2008-2009 Red Hat, Inc.
* Copyright (C) 2015 Red Hat, Inc.
*
* Some part derived from fs/eventfd.c (anon inode setup) and
* mm/ksm.c (mm hashing).
*/
#include <linux/list.h>
#include <linux/hashtable.h>
#include <linux/sched/signal.h>
#include <linux/sched/mm.h>
#include <linux/mm.h>
mm: move anon_vma declarations to linux/mm_inline.h The patch to add anonymous vma names causes a build failure in some configurations: include/linux/mm_types.h: In function 'is_same_vma_anon_name': include/linux/mm_types.h:924:37: error: implicit declaration of function 'strcmp' [-Werror=implicit-function-declaration] 924 | return name && vma_name && !strcmp(name, vma_name); | ^~~~~~ include/linux/mm_types.h:22:1: note: 'strcmp' is defined in header '<string.h>'; did you forget to '#include <string.h>'? This should not really be part of linux/mm_types.h in the first place, as that header is meant to only contain structure defintions and need a minimum set of indirect includes itself. While the header clearly includes more than it should at this point, let's not make it worse by including string.h as well, which would pull in the expensive (compile-speed wise) fortify-string logic. Move the new functions into a separate header that only needs to be included in a couple of locations. Link: https://lkml.kernel.org/r/20211207125710.2503446-1-arnd@kernel.org Fixes: "mm: add a field to store names for private anonymous memory" Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Colin Cross <ccross@google.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Kees Cook <keescook@chromium.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Peter Xu <peterx@redhat.com> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yu Zhao <yuzhao@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-15 01:06:07 +03:00
#include <linux/mm_inline.h>
hugetlb/userfaultfd: unshare all pmds for hugetlbfs when register wp Huge pmd sharing for hugetlbfs is racy with userfaultfd-wp because userfaultfd-wp is always based on pgtable entries, so they cannot be shared. Walk the hugetlb range and unshare all such mappings if there is, right before UFFDIO_REGISTER will succeed and return to userspace. This will pair with want_pmd_share() in hugetlb code so that huge pmd sharing is completely disabled for userfaultfd-wp registered range. Link: https://lkml.kernel.org/r/20210218231206.15524-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Peter Xu <peterx@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Adam Ruprecht <ruprecht@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Cannon Matthews <cannonmatthews@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: David Rientjes <rientjes@google.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michal Koutn" <mkoutny@suse.com> Cc: Michel Lespinasse <walken@google.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oliver Upton <oupton@google.com> Cc: Shaohua Li <shli@fb.com> Cc: Shawn Anastasio <shawn@anastas.io> Cc: Steven Price <steven.price@arm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 04:33:13 +03:00
#include <linux/mmu_notifier.h>
#include <linux/poll.h>
#include <linux/slab.h>
#include <linux/seq_file.h>
#include <linux/file.h>
#include <linux/bug.h>
#include <linux/anon_inodes.h>
#include <linux/syscalls.h>
#include <linux/userfaultfd_k.h>
#include <linux/mempolicy.h>
#include <linux/ioctl.h>
#include <linux/security.h>
#include <linux/hugetlb.h>
#include <linux/swapops.h>
userfaultfd: add user-mode only option to unprivileged_userfaultfd sysctl knob With this change, when the knob is set to 0, it allows unprivileged users to call userfaultfd, like when it is set to 1, but with the restriction that page faults from only user-mode can be handled. In this mode, an unprivileged user (without SYS_CAP_PTRACE capability) must pass UFFD_USER_MODE_ONLY to userfaultd or the API will fail with EPERM. This enables administrators to reduce the likelihood that an attacker with access to userfaultfd can delay faulting kernel code to widen timing windows for other exploits. The default value of this knob is changed to 0. This is required for correct functioning of pipe mutex. However, this will fail postcopy live migration, which will be unnoticeable to the VM guests. To avoid this, set 'vm.userfault = 1' in /sys/sysctl.conf. The main reason this change is desirable as in the short term is that the Android userland will behave as with the sysctl set to zero. So without this commit, any Linux binary using userfaultfd to manage its memory would behave differently if run within the Android userland. For more details, refer to Andrea's reply [1]. [1] https://lore.kernel.org/lkml/20200904033438.GI9411@redhat.com/ Link: https://lkml.kernel.org/r/20201120030411.2690816-3-lokeshgidra@google.com Signed-off-by: Lokesh Gidra <lokeshgidra@google.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Peter Xu <peterx@redhat.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Stephen Smalley <stephen.smalley.work@gmail.com> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Daniel Colascione <dancol@dancol.org> Cc: "Joel Fernandes (Google)" <joel@joelfernandes.org> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: <calin@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Shaohua Li <shli@fb.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Nitin Gupta <nigupta@nvidia.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Daniel Colascione <dancol@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:13:54 +03:00
int sysctl_unprivileged_userfaultfd __read_mostly;
userfaultfd/sysctl: add vm.unprivileged_userfaultfd Userfaultfd can be misued to make it easier to exploit existing use-after-free (and similar) bugs that might otherwise only make a short window or race condition available. By using userfaultfd to stall a kernel thread, a malicious program can keep some state that it wrote, stable for an extended period, which it can then access using an existing exploit. While it doesn't cause the exploit itself, and while it's not the only thing that can stall a kernel thread when accessing a memory location, it's one of the few that never needs privilege. We can add a flag, allowing userfaultfd to be restricted, so that in general it won't be useable by arbitrary user programs, but in environments that require userfaultfd it can be turned back on. Add a global sysctl knob "vm.unprivileged_userfaultfd" to control whether userfaultfd is allowed by unprivileged users. When this is set to zero, only privileged users (root user, or users with the CAP_SYS_PTRACE capability) will be able to use the userfaultfd syscalls. Andrea said: : The only difference between the bpf sysctl and the userfaultfd sysctl : this way is that the bpf sysctl adds the CAP_SYS_ADMIN capability : requirement, while userfaultfd adds the CAP_SYS_PTRACE requirement, : because the userfaultfd monitor is more likely to need CAP_SYS_PTRACE : already if it's doing other kind of tracking on processes runtime, in : addition of userfaultfd. In other words both syscalls works only for : root, when the two sysctl are opt-in set to 1. [dgilbert@redhat.com: changelog additions] [akpm@linux-foundation.org: documentation tweak, per Mike] Link: http://lkml.kernel.org/r/20190319030722.12441-2-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Suggested-by: Andrea Arcangeli <aarcange@redhat.com> Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Maxime Coquelin <maxime.coquelin@redhat.com> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Martin Cracauer <cracauer@cons.org> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mel Gorman <mgorman@suse.de> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 03:16:41 +03:00
static struct kmem_cache *userfaultfd_ctx_cachep __read_mostly;
/*
* Start with fault_pending_wqh and fault_wqh so they're more likely
* to be in the same cacheline.
fs/userfaultfd.c: disable irqs for fault_pending and event locks When IOCB_CMD_POLL is used on a userfaultfd, aio_poll() disables IRQs and takes kioctx::ctx_lock, then userfaultfd_ctx::fd_wqh.lock. This may have to wait for userfaultfd_ctx::fd_wqh.lock to be released by userfaultfd_ctx_read(), which in turn can be waiting for userfaultfd_ctx::fault_pending_wqh.lock or userfaultfd_ctx::event_wqh.lock. But elsewhere the fault_pending_wqh and event_wqh locks are taken with IRQs enabled. Since the IRQ handler may take kioctx::ctx_lock, lockdep reports that a deadlock is possible. Fix it by always disabling IRQs when taking the fault_pending_wqh and event_wqh locks. Commit ae62c16e105a ("userfaultfd: disable irqs when taking the waitqueue lock") didn't fix this because it only accounted for the fd_wqh lock, not the other locks nested inside it. Link: http://lkml.kernel.org/r/20190627075004.21259-1-ebiggers@kernel.org Fixes: bfe4037e722e ("aio: implement IOCB_CMD_POLL") Signed-off-by: Eric Biggers <ebiggers@google.com> Reported-by: syzbot+fab6de82892b6b9c6191@syzkaller.appspotmail.com Reported-by: syzbot+53c0b767f7ca0dc0c451@syzkaller.appspotmail.com Reported-by: syzbot+a3accb352f9c22041cfa@syzkaller.appspotmail.com Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> [4.19+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-05 01:14:39 +03:00
*
* Locking order:
* fd_wqh.lock
* fault_pending_wqh.lock
* fault_wqh.lock
* event_wqh.lock
*
* To avoid deadlocks, IRQs must be disabled when taking any of the above locks,
* since fd_wqh.lock is taken by aio_poll() while it's holding a lock that's
* also taken in IRQ context.
*/
struct userfaultfd_ctx {
/* waitqueue head for the pending (i.e. not read) userfaults */
wait_queue_head_t fault_pending_wqh;
/* waitqueue head for the userfaults */
wait_queue_head_t fault_wqh;
/* waitqueue head for the pseudo fd to wakeup poll/read */
wait_queue_head_t fd_wqh;
/* waitqueue head for events */
wait_queue_head_t event_wqh;
/* a refile sequence protected by fault_pending_wqh lock */
seqcount_spinlock_t refile_seq;
/* pseudo fd refcounting */
refcount_t refcount;
/* userfaultfd syscall flags */
unsigned int flags;
/* features requested from the userspace */
unsigned int features;
/* released */
bool released;
userfaultfd: prevent non-cooperative events vs mcopy_atomic races If a process monitored with userfaultfd changes it's memory mappings or forks() at the same time as uffd monitor fills the process memory with UFFDIO_COPY, the actual creation of page table entries and copying of the data in mcopy_atomic may happen either before of after the memory mapping modifications and there is no way for the uffd monitor to maintain consistent view of the process memory layout. For instance, let's consider fork() running in parallel with userfaultfd_copy(): process | uffd monitor ---------------------------------+------------------------------ fork() | userfaultfd_copy() ... | ... dup_mmap() | down_read(mmap_sem) down_write(mmap_sem) | /* create PTEs, copy data */ dup_uffd() | up_read(mmap_sem) copy_page_range() | up_write(mmap_sem) | dup_uffd_complete() | /* notify monitor */ | If the userfaultfd_copy() takes the mmap_sem first, the new page(s) will be present by the time copy_page_range() is called and they will appear in the child's memory mappings. However, if the fork() is the first to take the mmap_sem, the new pages won't be mapped in the child's address space. If the pages are not present and child tries to access them, the monitor will get page fault notification and everything is fine. However, if the pages *are present*, the child can access them without uffd noticing. And if we copy them into child it'll see the wrong data. Since we are talking about background copy, we'd need to decide whether the pages should be copied or not regardless #PF notifications. Since userfaultfd monitor has no way to determine what was the order, let's disallow userfaultfd_copy in parallel with the non-cooperative events. In such case we return -EAGAIN and the uffd monitor can understand that userfaultfd_copy() clashed with a non-cooperative event and take an appropriate action. Link: http://lkml.kernel.org/r/1527061324-19949-1-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Pavel Emelyanov <xemul@virtuozzo.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-08 03:09:25 +03:00
/* memory mappings are changing because of non-cooperative event */
userfaultfd: change mmap_changing to atomic Patch series "userfaultfd: minor bug fixes". Three unrelated bug fixes. The first two addresses possible issues (not too theoretical ones), but I did not encounter them in practice. The third patch addresses a test bug that causes the test to fail on my system. It has been sent before as part of a bigger RFC. This patch (of 3): mmap_changing is currently a boolean variable, which is set and cleared without any lock that protects against concurrent modifications. mmap_changing is supposed to mark whether userfaultfd page-faults handling should be retried since mappings are undergoing a change. However, concurrent calls, for instance to madvise(MADV_DONTNEED), might cause mmap_changing to be false, although the remove event was still not read (hence acknowledged) by the user. Change mmap_changing to atomic_t and increase/decrease appropriately. Add a debug assertion to see whether mmap_changing is negative. Link: https://lkml.kernel.org/r/20210808020724.1022515-1-namit@vmware.com Link: https://lkml.kernel.org/r/20210808020724.1022515-2-namit@vmware.com Fixes: df2cc96e77011 ("userfaultfd: prevent non-cooperative events vs mcopy_atomic races") Signed-off-by: Nadav Amit <namit@vmware.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Peter Xu <peterx@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03 00:58:56 +03:00
atomic_t mmap_changing;
/* mm with one ore more vmas attached to this userfaultfd_ctx */
struct mm_struct *mm;
};
2017-02-23 02:42:27 +03:00
struct userfaultfd_fork_ctx {
struct userfaultfd_ctx *orig;
struct userfaultfd_ctx *new;
struct list_head list;
};
struct userfaultfd_unmap_ctx {
struct userfaultfd_ctx *ctx;
unsigned long start;
unsigned long end;
struct list_head list;
};
struct userfaultfd_wait_queue {
userfaultfd: change the read API to return a uffd_msg I had requests to return the full address (not the page aligned one) to userland. It's not entirely clear how the page offset could be relevant because userfaults aren't like SIGBUS that can sigjump to a different place and it actually skip resolving the fault depending on a page offset. There's currently no real way to skip the fault especially because after a UFFDIO_COPY|ZEROPAGE, the fault is optimized to be retried within the kernel without having to return to userland first (not even self modifying code replacing the .text that touched the faulting address would prevent the fault to be repeated). Userland cannot skip repeating the fault even more so if the fault was triggered by a KVM secondary page fault or any get_user_pages or any copy-user inside some syscall which will return to kernel code. The second time FAULT_FLAG_RETRY_NOWAIT won't be set leading to a SIGBUS being raised because the userfault can't wait if it cannot release the mmap_map first (and FAULT_FLAG_RETRY_NOWAIT is required for that). Still returning userland a proper structure during the read() on the uffd, can allow to use the current UFFD_API for the future non-cooperative extensions too and it looks cleaner as well. Once we get additional fields there's no point to return the fault address page aligned anymore to reuse the bits below PAGE_SHIFT. The only downside is that the read() syscall will read 32bytes instead of 8bytes but that's not going to be measurable overhead. The total number of new events that can be extended or of new future bits for already shipped events, is limited to 64 by the features field of the uffdio_api structure. If more will be needed a bump of UFFD_API will be required. [akpm@linux-foundation.org: use __packed] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:37 +03:00
struct uffd_msg msg;
wait_queue_entry_t wq;
struct userfaultfd_ctx *ctx;
userfaultfd: fix SIGBUS resulting from false rwsem wakeups With >=32 CPUs the userfaultfd selftest triggered a graceful but unexpected SIGBUS because VM_FAULT_RETRY was returned by handle_userfault() despite the UFFDIO_COPY wasn't completed. This seems caused by rwsem waking the thread blocked in handle_userfault() and we can't run up_read() before the wait_event sequence is complete. Keeping the wait_even sequence identical to the first one, would require running userfaultfd_must_wait() again to know if the loop should be repeated, and it would also require retaking the rwsem and revalidating the whole vma status. It seems simpler to wait the targeted wakeup so that if false wakeups materialize we still wait for our specific wakeup event, unless of course there are signals or the uffd was released. Debug code collecting the stack trace of the wakeup showed this: $ ./userfaultfd 100 99999 nr_pages: 25600, nr_pages_per_cpu: 800 bounces: 99998, mode: racing ver poll, userfaults: 32 35 90 232 30 138 69 82 34 30 139 40 40 31 20 19 43 13 15 28 27 38 21 43 56 22 1 17 31 8 4 2 bounces: 99997, mode: rnd ver poll, Bus error (core dumped) save_stack_trace+0x2b/0x50 try_to_wake_up+0x2a6/0x580 wake_up_q+0x32/0x70 rwsem_wake+0xe0/0x120 call_rwsem_wake+0x1b/0x30 up_write+0x3b/0x40 vm_mmap_pgoff+0x9c/0xc0 SyS_mmap_pgoff+0x1a9/0x240 SyS_mmap+0x22/0x30 entry_SYSCALL_64_fastpath+0x1f/0xbd 0xffffffffffffffff FAULT_FLAG_ALLOW_RETRY missing 70 CPU: 24 PID: 1054 Comm: userfaultfd Tainted: G W 4.8.0+ #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xb8/0x112 handle_userfault+0x572/0x650 handle_mm_fault+0x12cb/0x1520 __do_page_fault+0x175/0x500 trace_do_page_fault+0x61/0x270 do_async_page_fault+0x19/0x90 async_page_fault+0x25/0x30 This always happens when the main userfault selftest thread is running clone() while glibc runs either mprotect or mmap (both taking mmap_sem down_write()) to allocate the thread stack of the background threads, while locking/userfault threads already run at full throttle and are susceptible to false wakeups that may cause handle_userfault() to return before than expected (which results in graceful SIGBUS at the next attempt). This was reproduced only with >=32 CPUs because the loop to start the thread where clone() is too quick with fewer CPUs, while with 32 CPUs there's already significant activity on ~32 locking and userfault threads when the last background threads are started with clone(). This >=32 CPUs SMP race condition is likely reproducible only with the selftest because of the much heavier userfault load it generates if compared to real apps. We'll have to allow "one more" VM_FAULT_RETRY for the WP support and a patch floating around that provides it also hidden this problem but in reality only is successfully at hiding the problem. False wakeups could still happen again the second time handle_userfault() is invoked, even if it's a so rare race condition that getting false wakeups twice in a row is impossible to reproduce. This full fix is needed for correctness, the only alternative would be to allow VM_FAULT_RETRY to be returned infinitely. With this fix the WP support can stick to a strict "one more" VM_FAULT_RETRY logic (no need of returning it infinite times to avoid the SIGBUS). Link: http://lkml.kernel.org/r/20170111005535.13832-2-aarcange@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reported-by: Shubham Kumar Sharma <shubham.kumar.sharma@oracle.com> Tested-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Michael Rapoport <RAPOPORT@il.ibm.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-25 02:17:59 +03:00
bool waken;
};
struct userfaultfd_wake_range {
unsigned long start;
unsigned long len;
};
/* internal indication that UFFD_API ioctl was successfully executed */
#define UFFD_FEATURE_INITIALIZED (1u << 31)
static bool userfaultfd_is_initialized(struct userfaultfd_ctx *ctx)
{
return ctx->features & UFFD_FEATURE_INITIALIZED;
}
static int userfaultfd_wake_function(wait_queue_entry_t *wq, unsigned mode,
int wake_flags, void *key)
{
struct userfaultfd_wake_range *range = key;
int ret;
struct userfaultfd_wait_queue *uwq;
unsigned long start, len;
uwq = container_of(wq, struct userfaultfd_wait_queue, wq);
ret = 0;
/* len == 0 means wake all */
start = range->start;
len = range->len;
userfaultfd: change the read API to return a uffd_msg I had requests to return the full address (not the page aligned one) to userland. It's not entirely clear how the page offset could be relevant because userfaults aren't like SIGBUS that can sigjump to a different place and it actually skip resolving the fault depending on a page offset. There's currently no real way to skip the fault especially because after a UFFDIO_COPY|ZEROPAGE, the fault is optimized to be retried within the kernel without having to return to userland first (not even self modifying code replacing the .text that touched the faulting address would prevent the fault to be repeated). Userland cannot skip repeating the fault even more so if the fault was triggered by a KVM secondary page fault or any get_user_pages or any copy-user inside some syscall which will return to kernel code. The second time FAULT_FLAG_RETRY_NOWAIT won't be set leading to a SIGBUS being raised because the userfault can't wait if it cannot release the mmap_map first (and FAULT_FLAG_RETRY_NOWAIT is required for that). Still returning userland a proper structure during the read() on the uffd, can allow to use the current UFFD_API for the future non-cooperative extensions too and it looks cleaner as well. Once we get additional fields there's no point to return the fault address page aligned anymore to reuse the bits below PAGE_SHIFT. The only downside is that the read() syscall will read 32bytes instead of 8bytes but that's not going to be measurable overhead. The total number of new events that can be extended or of new future bits for already shipped events, is limited to 64 by the features field of the uffdio_api structure. If more will be needed a bump of UFFD_API will be required. [akpm@linux-foundation.org: use __packed] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:37 +03:00
if (len && (start > uwq->msg.arg.pagefault.address ||
start + len <= uwq->msg.arg.pagefault.address))
goto out;
userfaultfd: fix SIGBUS resulting from false rwsem wakeups With >=32 CPUs the userfaultfd selftest triggered a graceful but unexpected SIGBUS because VM_FAULT_RETRY was returned by handle_userfault() despite the UFFDIO_COPY wasn't completed. This seems caused by rwsem waking the thread blocked in handle_userfault() and we can't run up_read() before the wait_event sequence is complete. Keeping the wait_even sequence identical to the first one, would require running userfaultfd_must_wait() again to know if the loop should be repeated, and it would also require retaking the rwsem and revalidating the whole vma status. It seems simpler to wait the targeted wakeup so that if false wakeups materialize we still wait for our specific wakeup event, unless of course there are signals or the uffd was released. Debug code collecting the stack trace of the wakeup showed this: $ ./userfaultfd 100 99999 nr_pages: 25600, nr_pages_per_cpu: 800 bounces: 99998, mode: racing ver poll, userfaults: 32 35 90 232 30 138 69 82 34 30 139 40 40 31 20 19 43 13 15 28 27 38 21 43 56 22 1 17 31 8 4 2 bounces: 99997, mode: rnd ver poll, Bus error (core dumped) save_stack_trace+0x2b/0x50 try_to_wake_up+0x2a6/0x580 wake_up_q+0x32/0x70 rwsem_wake+0xe0/0x120 call_rwsem_wake+0x1b/0x30 up_write+0x3b/0x40 vm_mmap_pgoff+0x9c/0xc0 SyS_mmap_pgoff+0x1a9/0x240 SyS_mmap+0x22/0x30 entry_SYSCALL_64_fastpath+0x1f/0xbd 0xffffffffffffffff FAULT_FLAG_ALLOW_RETRY missing 70 CPU: 24 PID: 1054 Comm: userfaultfd Tainted: G W 4.8.0+ #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xb8/0x112 handle_userfault+0x572/0x650 handle_mm_fault+0x12cb/0x1520 __do_page_fault+0x175/0x500 trace_do_page_fault+0x61/0x270 do_async_page_fault+0x19/0x90 async_page_fault+0x25/0x30 This always happens when the main userfault selftest thread is running clone() while glibc runs either mprotect or mmap (both taking mmap_sem down_write()) to allocate the thread stack of the background threads, while locking/userfault threads already run at full throttle and are susceptible to false wakeups that may cause handle_userfault() to return before than expected (which results in graceful SIGBUS at the next attempt). This was reproduced only with >=32 CPUs because the loop to start the thread where clone() is too quick with fewer CPUs, while with 32 CPUs there's already significant activity on ~32 locking and userfault threads when the last background threads are started with clone(). This >=32 CPUs SMP race condition is likely reproducible only with the selftest because of the much heavier userfault load it generates if compared to real apps. We'll have to allow "one more" VM_FAULT_RETRY for the WP support and a patch floating around that provides it also hidden this problem but in reality only is successfully at hiding the problem. False wakeups could still happen again the second time handle_userfault() is invoked, even if it's a so rare race condition that getting false wakeups twice in a row is impossible to reproduce. This full fix is needed for correctness, the only alternative would be to allow VM_FAULT_RETRY to be returned infinitely. With this fix the WP support can stick to a strict "one more" VM_FAULT_RETRY logic (no need of returning it infinite times to avoid the SIGBUS). Link: http://lkml.kernel.org/r/20170111005535.13832-2-aarcange@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reported-by: Shubham Kumar Sharma <shubham.kumar.sharma@oracle.com> Tested-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Michael Rapoport <RAPOPORT@il.ibm.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-25 02:17:59 +03:00
WRITE_ONCE(uwq->waken, true);
/*
* The Program-Order guarantees provided by the scheduler
* ensure uwq->waken is visible before the task is woken.
userfaultfd: fix SIGBUS resulting from false rwsem wakeups With >=32 CPUs the userfaultfd selftest triggered a graceful but unexpected SIGBUS because VM_FAULT_RETRY was returned by handle_userfault() despite the UFFDIO_COPY wasn't completed. This seems caused by rwsem waking the thread blocked in handle_userfault() and we can't run up_read() before the wait_event sequence is complete. Keeping the wait_even sequence identical to the first one, would require running userfaultfd_must_wait() again to know if the loop should be repeated, and it would also require retaking the rwsem and revalidating the whole vma status. It seems simpler to wait the targeted wakeup so that if false wakeups materialize we still wait for our specific wakeup event, unless of course there are signals or the uffd was released. Debug code collecting the stack trace of the wakeup showed this: $ ./userfaultfd 100 99999 nr_pages: 25600, nr_pages_per_cpu: 800 bounces: 99998, mode: racing ver poll, userfaults: 32 35 90 232 30 138 69 82 34 30 139 40 40 31 20 19 43 13 15 28 27 38 21 43 56 22 1 17 31 8 4 2 bounces: 99997, mode: rnd ver poll, Bus error (core dumped) save_stack_trace+0x2b/0x50 try_to_wake_up+0x2a6/0x580 wake_up_q+0x32/0x70 rwsem_wake+0xe0/0x120 call_rwsem_wake+0x1b/0x30 up_write+0x3b/0x40 vm_mmap_pgoff+0x9c/0xc0 SyS_mmap_pgoff+0x1a9/0x240 SyS_mmap+0x22/0x30 entry_SYSCALL_64_fastpath+0x1f/0xbd 0xffffffffffffffff FAULT_FLAG_ALLOW_RETRY missing 70 CPU: 24 PID: 1054 Comm: userfaultfd Tainted: G W 4.8.0+ #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xb8/0x112 handle_userfault+0x572/0x650 handle_mm_fault+0x12cb/0x1520 __do_page_fault+0x175/0x500 trace_do_page_fault+0x61/0x270 do_async_page_fault+0x19/0x90 async_page_fault+0x25/0x30 This always happens when the main userfault selftest thread is running clone() while glibc runs either mprotect or mmap (both taking mmap_sem down_write()) to allocate the thread stack of the background threads, while locking/userfault threads already run at full throttle and are susceptible to false wakeups that may cause handle_userfault() to return before than expected (which results in graceful SIGBUS at the next attempt). This was reproduced only with >=32 CPUs because the loop to start the thread where clone() is too quick with fewer CPUs, while with 32 CPUs there's already significant activity on ~32 locking and userfault threads when the last background threads are started with clone(). This >=32 CPUs SMP race condition is likely reproducible only with the selftest because of the much heavier userfault load it generates if compared to real apps. We'll have to allow "one more" VM_FAULT_RETRY for the WP support and a patch floating around that provides it also hidden this problem but in reality only is successfully at hiding the problem. False wakeups could still happen again the second time handle_userfault() is invoked, even if it's a so rare race condition that getting false wakeups twice in a row is impossible to reproduce. This full fix is needed for correctness, the only alternative would be to allow VM_FAULT_RETRY to be returned infinitely. With this fix the WP support can stick to a strict "one more" VM_FAULT_RETRY logic (no need of returning it infinite times to avoid the SIGBUS). Link: http://lkml.kernel.org/r/20170111005535.13832-2-aarcange@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reported-by: Shubham Kumar Sharma <shubham.kumar.sharma@oracle.com> Tested-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Michael Rapoport <RAPOPORT@il.ibm.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-25 02:17:59 +03:00
*/
ret = wake_up_state(wq->private, mode);
if (ret) {
/*
* Wake only once, autoremove behavior.
*
* After the effect of list_del_init is visible to the other
* CPUs, the waitqueue may disappear from under us, see the
* !list_empty_careful() in handle_userfault().
*
* try_to_wake_up() has an implicit smp_mb(), and the
* wq->private is read before calling the extern function
* "wake_up_state" (which in turns calls try_to_wake_up).
*/
sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list naming So I've noticed a number of instances where it was not obvious from the code whether ->task_list was for a wait-queue head or a wait-queue entry. Furthermore, there's a number of wait-queue users where the lists are not for 'tasks' but other entities (poll tables, etc.), in which case the 'task_list' name is actively confusing. To clear this all up, name the wait-queue head and entry list structure fields unambiguously: struct wait_queue_head::task_list => ::head struct wait_queue_entry::task_list => ::entry For example, this code: rqw->wait.task_list.next != &wait->task_list ... is was pretty unclear (to me) what it's doing, while now it's written this way: rqw->wait.head.next != &wait->entry ... which makes it pretty clear that we are iterating a list until we see the head. Other examples are: list_for_each_entry_safe(pos, next, &x->task_list, task_list) { list_for_each_entry(wq, &fence->wait.task_list, task_list) { ... where it's unclear (to me) what we are iterating, and during review it's hard to tell whether it's trying to walk a wait-queue entry (which would be a bug), while now it's written as: list_for_each_entry_safe(pos, next, &x->head, entry) { list_for_each_entry(wq, &fence->wait.head, entry) { Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20 13:06:46 +03:00
list_del_init(&wq->entry);
}
out:
return ret;
}
/**
* userfaultfd_ctx_get - Acquires a reference to the internal userfaultfd
* context.
* @ctx: [in] Pointer to the userfaultfd context.
*/
static void userfaultfd_ctx_get(struct userfaultfd_ctx *ctx)
{
refcount_inc(&ctx->refcount);
}
/**
* userfaultfd_ctx_put - Releases a reference to the internal userfaultfd
* context.
* @ctx: [in] Pointer to userfaultfd context.
*
* The userfaultfd context reference must have been previously acquired either
* with userfaultfd_ctx_get() or userfaultfd_ctx_fdget().
*/
static void userfaultfd_ctx_put(struct userfaultfd_ctx *ctx)
{
if (refcount_dec_and_test(&ctx->refcount)) {
VM_BUG_ON(spin_is_locked(&ctx->fault_pending_wqh.lock));
VM_BUG_ON(waitqueue_active(&ctx->fault_pending_wqh));
VM_BUG_ON(spin_is_locked(&ctx->fault_wqh.lock));
VM_BUG_ON(waitqueue_active(&ctx->fault_wqh));
VM_BUG_ON(spin_is_locked(&ctx->event_wqh.lock));
VM_BUG_ON(waitqueue_active(&ctx->event_wqh));
VM_BUG_ON(spin_is_locked(&ctx->fd_wqh.lock));
VM_BUG_ON(waitqueue_active(&ctx->fd_wqh));
mmdrop(ctx->mm);
kmem_cache_free(userfaultfd_ctx_cachep, ctx);
}
}
userfaultfd: change the read API to return a uffd_msg I had requests to return the full address (not the page aligned one) to userland. It's not entirely clear how the page offset could be relevant because userfaults aren't like SIGBUS that can sigjump to a different place and it actually skip resolving the fault depending on a page offset. There's currently no real way to skip the fault especially because after a UFFDIO_COPY|ZEROPAGE, the fault is optimized to be retried within the kernel without having to return to userland first (not even self modifying code replacing the .text that touched the faulting address would prevent the fault to be repeated). Userland cannot skip repeating the fault even more so if the fault was triggered by a KVM secondary page fault or any get_user_pages or any copy-user inside some syscall which will return to kernel code. The second time FAULT_FLAG_RETRY_NOWAIT won't be set leading to a SIGBUS being raised because the userfault can't wait if it cannot release the mmap_map first (and FAULT_FLAG_RETRY_NOWAIT is required for that). Still returning userland a proper structure during the read() on the uffd, can allow to use the current UFFD_API for the future non-cooperative extensions too and it looks cleaner as well. Once we get additional fields there's no point to return the fault address page aligned anymore to reuse the bits below PAGE_SHIFT. The only downside is that the read() syscall will read 32bytes instead of 8bytes but that's not going to be measurable overhead. The total number of new events that can be extended or of new future bits for already shipped events, is limited to 64 by the features field of the uffdio_api structure. If more will be needed a bump of UFFD_API will be required. [akpm@linux-foundation.org: use __packed] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:37 +03:00
static inline void msg_init(struct uffd_msg *msg)
{
userfaultfd: change the read API to return a uffd_msg I had requests to return the full address (not the page aligned one) to userland. It's not entirely clear how the page offset could be relevant because userfaults aren't like SIGBUS that can sigjump to a different place and it actually skip resolving the fault depending on a page offset. There's currently no real way to skip the fault especially because after a UFFDIO_COPY|ZEROPAGE, the fault is optimized to be retried within the kernel without having to return to userland first (not even self modifying code replacing the .text that touched the faulting address would prevent the fault to be repeated). Userland cannot skip repeating the fault even more so if the fault was triggered by a KVM secondary page fault or any get_user_pages or any copy-user inside some syscall which will return to kernel code. The second time FAULT_FLAG_RETRY_NOWAIT won't be set leading to a SIGBUS being raised because the userfault can't wait if it cannot release the mmap_map first (and FAULT_FLAG_RETRY_NOWAIT is required for that). Still returning userland a proper structure during the read() on the uffd, can allow to use the current UFFD_API for the future non-cooperative extensions too and it looks cleaner as well. Once we get additional fields there's no point to return the fault address page aligned anymore to reuse the bits below PAGE_SHIFT. The only downside is that the read() syscall will read 32bytes instead of 8bytes but that's not going to be measurable overhead. The total number of new events that can be extended or of new future bits for already shipped events, is limited to 64 by the features field of the uffdio_api structure. If more will be needed a bump of UFFD_API will be required. [akpm@linux-foundation.org: use __packed] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:37 +03:00
BUILD_BUG_ON(sizeof(struct uffd_msg) != 32);
/*
* Must use memset to zero out the paddings or kernel data is
* leaked to userland.
*/
memset(msg, 0, sizeof(struct uffd_msg));
}
static inline struct uffd_msg userfault_msg(unsigned long address,
2022-07-11 19:59:06 +03:00
unsigned long real_address,
userfaultfd: change the read API to return a uffd_msg I had requests to return the full address (not the page aligned one) to userland. It's not entirely clear how the page offset could be relevant because userfaults aren't like SIGBUS that can sigjump to a different place and it actually skip resolving the fault depending on a page offset. There's currently no real way to skip the fault especially because after a UFFDIO_COPY|ZEROPAGE, the fault is optimized to be retried within the kernel without having to return to userland first (not even self modifying code replacing the .text that touched the faulting address would prevent the fault to be repeated). Userland cannot skip repeating the fault even more so if the fault was triggered by a KVM secondary page fault or any get_user_pages or any copy-user inside some syscall which will return to kernel code. The second time FAULT_FLAG_RETRY_NOWAIT won't be set leading to a SIGBUS being raised because the userfault can't wait if it cannot release the mmap_map first (and FAULT_FLAG_RETRY_NOWAIT is required for that). Still returning userland a proper structure during the read() on the uffd, can allow to use the current UFFD_API for the future non-cooperative extensions too and it looks cleaner as well. Once we get additional fields there's no point to return the fault address page aligned anymore to reuse the bits below PAGE_SHIFT. The only downside is that the read() syscall will read 32bytes instead of 8bytes but that's not going to be measurable overhead. The total number of new events that can be extended or of new future bits for already shipped events, is limited to 64 by the features field of the uffdio_api structure. If more will be needed a bump of UFFD_API will be required. [akpm@linux-foundation.org: use __packed] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:37 +03:00
unsigned int flags,
unsigned long reason,
unsigned int features)
userfaultfd: change the read API to return a uffd_msg I had requests to return the full address (not the page aligned one) to userland. It's not entirely clear how the page offset could be relevant because userfaults aren't like SIGBUS that can sigjump to a different place and it actually skip resolving the fault depending on a page offset. There's currently no real way to skip the fault especially because after a UFFDIO_COPY|ZEROPAGE, the fault is optimized to be retried within the kernel without having to return to userland first (not even self modifying code replacing the .text that touched the faulting address would prevent the fault to be repeated). Userland cannot skip repeating the fault even more so if the fault was triggered by a KVM secondary page fault or any get_user_pages or any copy-user inside some syscall which will return to kernel code. The second time FAULT_FLAG_RETRY_NOWAIT won't be set leading to a SIGBUS being raised because the userfault can't wait if it cannot release the mmap_map first (and FAULT_FLAG_RETRY_NOWAIT is required for that). Still returning userland a proper structure during the read() on the uffd, can allow to use the current UFFD_API for the future non-cooperative extensions too and it looks cleaner as well. Once we get additional fields there's no point to return the fault address page aligned anymore to reuse the bits below PAGE_SHIFT. The only downside is that the read() syscall will read 32bytes instead of 8bytes but that's not going to be measurable overhead. The total number of new events that can be extended or of new future bits for already shipped events, is limited to 64 by the features field of the uffdio_api structure. If more will be needed a bump of UFFD_API will be required. [akpm@linux-foundation.org: use __packed] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:37 +03:00
{
struct uffd_msg msg;
2022-07-11 19:59:06 +03:00
userfaultfd: change the read API to return a uffd_msg I had requests to return the full address (not the page aligned one) to userland. It's not entirely clear how the page offset could be relevant because userfaults aren't like SIGBUS that can sigjump to a different place and it actually skip resolving the fault depending on a page offset. There's currently no real way to skip the fault especially because after a UFFDIO_COPY|ZEROPAGE, the fault is optimized to be retried within the kernel without having to return to userland first (not even self modifying code replacing the .text that touched the faulting address would prevent the fault to be repeated). Userland cannot skip repeating the fault even more so if the fault was triggered by a KVM secondary page fault or any get_user_pages or any copy-user inside some syscall which will return to kernel code. The second time FAULT_FLAG_RETRY_NOWAIT won't be set leading to a SIGBUS being raised because the userfault can't wait if it cannot release the mmap_map first (and FAULT_FLAG_RETRY_NOWAIT is required for that). Still returning userland a proper structure during the read() on the uffd, can allow to use the current UFFD_API for the future non-cooperative extensions too and it looks cleaner as well. Once we get additional fields there's no point to return the fault address page aligned anymore to reuse the bits below PAGE_SHIFT. The only downside is that the read() syscall will read 32bytes instead of 8bytes but that's not going to be measurable overhead. The total number of new events that can be extended or of new future bits for already shipped events, is limited to 64 by the features field of the uffdio_api structure. If more will be needed a bump of UFFD_API will be required. [akpm@linux-foundation.org: use __packed] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:37 +03:00
msg_init(&msg);
msg.event = UFFD_EVENT_PAGEFAULT;
userfaultfd: provide unmasked address on page-fault Userfaultfd is supposed to provide the full address (i.e., unmasked) of the faulting access back to userspace. However, that is not the case for quite some time. Even running "userfaultfd_demo" from the userfaultfd man page provides the wrong output (and contradicts the man page). Notice that "UFFD_EVENT_PAGEFAULT event" shows the masked address (7fc5e30b3000) and not the first read address (0x7fc5e30b300f). Address returned by mmap() = 0x7fc5e30b3000 fault_handler_thread(): poll() returns: nready = 1; POLLIN = 1; POLLERR = 0 UFFD_EVENT_PAGEFAULT event: flags = 0; address = 7fc5e30b3000 (uffdio_copy.copy returned 4096) Read address 0x7fc5e30b300f in main(): A Read address 0x7fc5e30b340f in main(): A Read address 0x7fc5e30b380f in main(): A Read address 0x7fc5e30b3c0f in main(): A The exact address is useful for various reasons and specifically for prefetching decisions. If it is known that the memory is populated by certain objects whose size is not page-aligned, then based on the faulting address, the uffd-monitor can decide whether to prefetch and prefault the adjacent page. This bug has been for quite some time in the kernel: since commit 1a29d85eb0f1 ("mm: use vmf->address instead of of vmf->virtual_address") vmf->virtual_address"), which dates back to 2016. A concern has been raised that existing userspace application might rely on the old/wrong behavior in which the address is masked. Therefore, it was suggested to provide the masked address unless the user explicitly asks for the exact address. Add a new userfaultfd feature UFFD_FEATURE_EXACT_ADDRESS to direct userfaultfd to provide the exact address. Add a new "real_address" field to vmf to hold the unmasked address. Provide the address to userspace accordingly. Initialize real_address in various code-paths to be consistent with address, even when it is not used, to be on the safe side. [namit@vmware.com: initialize real_address on all code paths, per Jan] Link: https://lkml.kernel.org/r/20220226022655.350562-1-namit@vmware.com [akpm@linux-foundation.org: fix typo in comment, per Jan] Link: https://lkml.kernel.org/r/20220218041003.3508-1-namit@vmware.com Signed-off-by: Nadav Amit <namit@vmware.com> Acked-by: Peter Xu <peterx@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Jan Kara <jack@suse.cz> Cc: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-03-23 00:45:32 +03:00
2022-07-11 19:59:06 +03:00
msg.arg.pagefault.address = (features & UFFD_FEATURE_EXACT_ADDRESS) ?
real_address : address;
userfaultfd: add minor fault registration mode Patch series "userfaultfd: add minor fault handling", v9. Overview ======== This series adds a new userfaultfd feature, UFFD_FEATURE_MINOR_HUGETLBFS. When enabled (via the UFFDIO_API ioctl), this feature means that any hugetlbfs VMAs registered with UFFDIO_REGISTER_MODE_MISSING will *also* get events for "minor" faults. By "minor" fault, I mean the following situation: Let there exist two mappings (i.e., VMAs) to the same page(s) (shared memory). One of the mappings is registered with userfaultfd (in minor mode), and the other is not. Via the non-UFFD mapping, the underlying pages have already been allocated & filled with some contents. The UFFD mapping has not yet been faulted in; when it is touched for the first time, this results in what I'm calling a "minor" fault. As a concrete example, when working with hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing page. We also add a new ioctl to resolve such faults: UFFDIO_CONTINUE. The idea is, userspace resolves the fault by either a) doing nothing if the contents are already correct, or b) updating the underlying contents using the second, non-UFFD mapping (via memcpy/memset or similar, or something fancier like RDMA, or etc...). In either case, userspace issues UFFDIO_CONTINUE to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". Use Case ======== Consider the use case of VM live migration (e.g. under QEMU/KVM): 1. While a VM is still running, we copy the contents of its memory to a target machine. The pages are populated on the target by writing to the non-UFFD mapping, using the setup described above. The VM is still running (and therefore its memory is likely changing), so this may be repeated several times, until we decide the target is "up to date enough". 2. We pause the VM on the source, and start executing on the target machine. During this gap, the VM's user(s) will *see* a pause, so it is desirable to minimize this window. 3. Between the last time any page was copied from the source to the target, and when the VM was paused, the contents of that page may have changed - and therefore the copy we have on the target machine is out of date. Although we can keep track of which pages are out of date, for VMs with large amounts of memory, it is "slow" to transfer this information to the target machine. We want to resume execution before such a transfer would complete. 4. So, the guest begins executing on the target machine. The first time it touches its memory (via the UFFD-registered mapping), userspace wants to intercept this fault. Userspace checks whether or not the page is up to date, and if not, copies the updated page from the source machine, via the non-UFFD mapping. Finally, whether a copy was performed or not, userspace issues a UFFDIO_CONTINUE ioctl to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". We don't have to do all of the final updates on-demand. The userfaultfd manager can, in the background, also copy over updated pages once it receives the map of which pages are up-to-date or not. Interaction with Existing APIs ============================== Because this is a feature, a registered VMA could potentially receive both missing and minor faults. I spent some time thinking through how the existing API interacts with the new feature: UFFDIO_CONTINUE cannot be used to resolve non-minor faults, as it does not allocate a new page. If UFFDIO_CONTINUE is used on a non-minor fault: - For non-shared memory or shmem, -EINVAL is returned. - For hugetlb, -EFAULT is returned. UFFDIO_COPY and UFFDIO_ZEROPAGE cannot be used to resolve minor faults. Without modifications, the existing codepath assumes a new page needs to be allocated. This is okay, since userspace must have a second non-UFFD-registered mapping anyway, thus there isn't much reason to want to use these in any case (just memcpy or memset or similar). - If UFFDIO_COPY is used on a minor fault, -EEXIST is returned. - If UFFDIO_ZEROPAGE is used on a minor fault, -EEXIST is returned (or -EINVAL in the case of hugetlb, as UFFDIO_ZEROPAGE is unsupported in any case). - UFFDIO_WRITEPROTECT simply doesn't work with shared memory, and returns -ENOENT in that case (regardless of the kind of fault). Future Work =========== This series only supports hugetlbfs. I have a second series in flight to support shmem as well, extending the functionality. This series is more mature than the shmem support at this point, and the functionality works fully on hugetlbfs, so this series can be merged first and then shmem support will follow. This patch (of 6): This feature allows userspace to intercept "minor" faults. By "minor" faults, I mean the following situation: Let there exist two mappings (i.e., VMAs) to the same page(s). One of the mappings is registered with userfaultfd (in minor mode), and the other is not. Via the non-UFFD mapping, the underlying pages have already been allocated & filled with some contents. The UFFD mapping has not yet been faulted in; when it is touched for the first time, this results in what I'm calling a "minor" fault. As a concrete example, when working with hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing page. This commit adds the new registration mode, and sets the relevant flag on the VMAs being registered. In the hugetlb fault path, if we find that we have huge_pte_none(), but find_lock_page() does indeed find an existing page, then we have a "minor" fault, and if the VMA has the userfaultfd registration flag, we call into userfaultfd to handle it. This is implemented as a new registration mode, instead of an API feature. This is because the alternative implementation has significant drawbacks [1]. However, doing it this was requires we allocate a VM_* flag for the new registration mode. On 32-bit systems, there are no unused bits, so this feature is only supported on architectures with CONFIG_ARCH_USES_HIGH_VMA_FLAGS. When attempting to register a VMA in MINOR mode on 32-bit architectures, we return -EINVAL. [1] https://lore.kernel.org/patchwork/patch/1380226/ [peterx@redhat.com: fix minor fault page leak] Link: https://lkml.kernel.org/r/20210322175132.36659-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20210301222728.176417-1-axelrasmussen@google.com Link: https://lkml.kernel.org/r/20210301222728.176417-2-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michal Koutn" <mkoutny@suse.com> Cc: Michel Lespinasse <walken@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: Shawn Anastasio <shawn@anastas.io> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Steven Price <steven.price@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Adam Ruprecht <ruprecht@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Cannon Matthews <cannonmatthews@google.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Oliver Upton <oupton@google.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 04:35:36 +03:00
/*
* These flags indicate why the userfault occurred:
* - UFFD_PAGEFAULT_FLAG_WP indicates a write protect fault.
* - UFFD_PAGEFAULT_FLAG_MINOR indicates a minor fault.
* - Neither of these flags being set indicates a MISSING fault.
*
* Separately, UFFD_PAGEFAULT_FLAG_WRITE indicates it was a write
* fault. Otherwise, it was a read fault.
*/
if (flags & FAULT_FLAG_WRITE)
userfaultfd: change the read API to return a uffd_msg I had requests to return the full address (not the page aligned one) to userland. It's not entirely clear how the page offset could be relevant because userfaults aren't like SIGBUS that can sigjump to a different place and it actually skip resolving the fault depending on a page offset. There's currently no real way to skip the fault especially because after a UFFDIO_COPY|ZEROPAGE, the fault is optimized to be retried within the kernel without having to return to userland first (not even self modifying code replacing the .text that touched the faulting address would prevent the fault to be repeated). Userland cannot skip repeating the fault even more so if the fault was triggered by a KVM secondary page fault or any get_user_pages or any copy-user inside some syscall which will return to kernel code. The second time FAULT_FLAG_RETRY_NOWAIT won't be set leading to a SIGBUS being raised because the userfault can't wait if it cannot release the mmap_map first (and FAULT_FLAG_RETRY_NOWAIT is required for that). Still returning userland a proper structure during the read() on the uffd, can allow to use the current UFFD_API for the future non-cooperative extensions too and it looks cleaner as well. Once we get additional fields there's no point to return the fault address page aligned anymore to reuse the bits below PAGE_SHIFT. The only downside is that the read() syscall will read 32bytes instead of 8bytes but that's not going to be measurable overhead. The total number of new events that can be extended or of new future bits for already shipped events, is limited to 64 by the features field of the uffdio_api structure. If more will be needed a bump of UFFD_API will be required. [akpm@linux-foundation.org: use __packed] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:37 +03:00
msg.arg.pagefault.flags |= UFFD_PAGEFAULT_FLAG_WRITE;
if (reason & VM_UFFD_WP)
userfaultfd: change the read API to return a uffd_msg I had requests to return the full address (not the page aligned one) to userland. It's not entirely clear how the page offset could be relevant because userfaults aren't like SIGBUS that can sigjump to a different place and it actually skip resolving the fault depending on a page offset. There's currently no real way to skip the fault especially because after a UFFDIO_COPY|ZEROPAGE, the fault is optimized to be retried within the kernel without having to return to userland first (not even self modifying code replacing the .text that touched the faulting address would prevent the fault to be repeated). Userland cannot skip repeating the fault even more so if the fault was triggered by a KVM secondary page fault or any get_user_pages or any copy-user inside some syscall which will return to kernel code. The second time FAULT_FLAG_RETRY_NOWAIT won't be set leading to a SIGBUS being raised because the userfault can't wait if it cannot release the mmap_map first (and FAULT_FLAG_RETRY_NOWAIT is required for that). Still returning userland a proper structure during the read() on the uffd, can allow to use the current UFFD_API for the future non-cooperative extensions too and it looks cleaner as well. Once we get additional fields there's no point to return the fault address page aligned anymore to reuse the bits below PAGE_SHIFT. The only downside is that the read() syscall will read 32bytes instead of 8bytes but that's not going to be measurable overhead. The total number of new events that can be extended or of new future bits for already shipped events, is limited to 64 by the features field of the uffdio_api structure. If more will be needed a bump of UFFD_API will be required. [akpm@linux-foundation.org: use __packed] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:37 +03:00
msg.arg.pagefault.flags |= UFFD_PAGEFAULT_FLAG_WP;
userfaultfd: add minor fault registration mode Patch series "userfaultfd: add minor fault handling", v9. Overview ======== This series adds a new userfaultfd feature, UFFD_FEATURE_MINOR_HUGETLBFS. When enabled (via the UFFDIO_API ioctl), this feature means that any hugetlbfs VMAs registered with UFFDIO_REGISTER_MODE_MISSING will *also* get events for "minor" faults. By "minor" fault, I mean the following situation: Let there exist two mappings (i.e., VMAs) to the same page(s) (shared memory). One of the mappings is registered with userfaultfd (in minor mode), and the other is not. Via the non-UFFD mapping, the underlying pages have already been allocated & filled with some contents. The UFFD mapping has not yet been faulted in; when it is touched for the first time, this results in what I'm calling a "minor" fault. As a concrete example, when working with hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing page. We also add a new ioctl to resolve such faults: UFFDIO_CONTINUE. The idea is, userspace resolves the fault by either a) doing nothing if the contents are already correct, or b) updating the underlying contents using the second, non-UFFD mapping (via memcpy/memset or similar, or something fancier like RDMA, or etc...). In either case, userspace issues UFFDIO_CONTINUE to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". Use Case ======== Consider the use case of VM live migration (e.g. under QEMU/KVM): 1. While a VM is still running, we copy the contents of its memory to a target machine. The pages are populated on the target by writing to the non-UFFD mapping, using the setup described above. The VM is still running (and therefore its memory is likely changing), so this may be repeated several times, until we decide the target is "up to date enough". 2. We pause the VM on the source, and start executing on the target machine. During this gap, the VM's user(s) will *see* a pause, so it is desirable to minimize this window. 3. Between the last time any page was copied from the source to the target, and when the VM was paused, the contents of that page may have changed - and therefore the copy we have on the target machine is out of date. Although we can keep track of which pages are out of date, for VMs with large amounts of memory, it is "slow" to transfer this information to the target machine. We want to resume execution before such a transfer would complete. 4. So, the guest begins executing on the target machine. The first time it touches its memory (via the UFFD-registered mapping), userspace wants to intercept this fault. Userspace checks whether or not the page is up to date, and if not, copies the updated page from the source machine, via the non-UFFD mapping. Finally, whether a copy was performed or not, userspace issues a UFFDIO_CONTINUE ioctl to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". We don't have to do all of the final updates on-demand. The userfaultfd manager can, in the background, also copy over updated pages once it receives the map of which pages are up-to-date or not. Interaction with Existing APIs ============================== Because this is a feature, a registered VMA could potentially receive both missing and minor faults. I spent some time thinking through how the existing API interacts with the new feature: UFFDIO_CONTINUE cannot be used to resolve non-minor faults, as it does not allocate a new page. If UFFDIO_CONTINUE is used on a non-minor fault: - For non-shared memory or shmem, -EINVAL is returned. - For hugetlb, -EFAULT is returned. UFFDIO_COPY and UFFDIO_ZEROPAGE cannot be used to resolve minor faults. Without modifications, the existing codepath assumes a new page needs to be allocated. This is okay, since userspace must have a second non-UFFD-registered mapping anyway, thus there isn't much reason to want to use these in any case (just memcpy or memset or similar). - If UFFDIO_COPY is used on a minor fault, -EEXIST is returned. - If UFFDIO_ZEROPAGE is used on a minor fault, -EEXIST is returned (or -EINVAL in the case of hugetlb, as UFFDIO_ZEROPAGE is unsupported in any case). - UFFDIO_WRITEPROTECT simply doesn't work with shared memory, and returns -ENOENT in that case (regardless of the kind of fault). Future Work =========== This series only supports hugetlbfs. I have a second series in flight to support shmem as well, extending the functionality. This series is more mature than the shmem support at this point, and the functionality works fully on hugetlbfs, so this series can be merged first and then shmem support will follow. This patch (of 6): This feature allows userspace to intercept "minor" faults. By "minor" faults, I mean the following situation: Let there exist two mappings (i.e., VMAs) to the same page(s). One of the mappings is registered with userfaultfd (in minor mode), and the other is not. Via the non-UFFD mapping, the underlying pages have already been allocated & filled with some contents. The UFFD mapping has not yet been faulted in; when it is touched for the first time, this results in what I'm calling a "minor" fault. As a concrete example, when working with hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing page. This commit adds the new registration mode, and sets the relevant flag on the VMAs being registered. In the hugetlb fault path, if we find that we have huge_pte_none(), but find_lock_page() does indeed find an existing page, then we have a "minor" fault, and if the VMA has the userfaultfd registration flag, we call into userfaultfd to handle it. This is implemented as a new registration mode, instead of an API feature. This is because the alternative implementation has significant drawbacks [1]. However, doing it this was requires we allocate a VM_* flag for the new registration mode. On 32-bit systems, there are no unused bits, so this feature is only supported on architectures with CONFIG_ARCH_USES_HIGH_VMA_FLAGS. When attempting to register a VMA in MINOR mode on 32-bit architectures, we return -EINVAL. [1] https://lore.kernel.org/patchwork/patch/1380226/ [peterx@redhat.com: fix minor fault page leak] Link: https://lkml.kernel.org/r/20210322175132.36659-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20210301222728.176417-1-axelrasmussen@google.com Link: https://lkml.kernel.org/r/20210301222728.176417-2-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michal Koutn" <mkoutny@suse.com> Cc: Michel Lespinasse <walken@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: Shawn Anastasio <shawn@anastas.io> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Steven Price <steven.price@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Adam Ruprecht <ruprecht@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Cannon Matthews <cannonmatthews@google.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Oliver Upton <oupton@google.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 04:35:36 +03:00
if (reason & VM_UFFD_MINOR)
msg.arg.pagefault.flags |= UFFD_PAGEFAULT_FLAG_MINOR;
if (features & UFFD_FEATURE_THREAD_ID)
msg.arg.pagefault.feat.ptid = task_pid_vnr(current);
userfaultfd: change the read API to return a uffd_msg I had requests to return the full address (not the page aligned one) to userland. It's not entirely clear how the page offset could be relevant because userfaults aren't like SIGBUS that can sigjump to a different place and it actually skip resolving the fault depending on a page offset. There's currently no real way to skip the fault especially because after a UFFDIO_COPY|ZEROPAGE, the fault is optimized to be retried within the kernel without having to return to userland first (not even self modifying code replacing the .text that touched the faulting address would prevent the fault to be repeated). Userland cannot skip repeating the fault even more so if the fault was triggered by a KVM secondary page fault or any get_user_pages or any copy-user inside some syscall which will return to kernel code. The second time FAULT_FLAG_RETRY_NOWAIT won't be set leading to a SIGBUS being raised because the userfault can't wait if it cannot release the mmap_map first (and FAULT_FLAG_RETRY_NOWAIT is required for that). Still returning userland a proper structure during the read() on the uffd, can allow to use the current UFFD_API for the future non-cooperative extensions too and it looks cleaner as well. Once we get additional fields there's no point to return the fault address page aligned anymore to reuse the bits below PAGE_SHIFT. The only downside is that the read() syscall will read 32bytes instead of 8bytes but that's not going to be measurable overhead. The total number of new events that can be extended or of new future bits for already shipped events, is limited to 64 by the features field of the uffdio_api structure. If more will be needed a bump of UFFD_API will be required. [akpm@linux-foundation.org: use __packed] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:37 +03:00
return msg;
}
#ifdef CONFIG_HUGETLB_PAGE
/*
* Same functionality as userfaultfd_must_wait below with modifications for
* hugepmd ranges.
*/
static inline bool userfaultfd_huge_must_wait(struct userfaultfd_ctx *ctx,
mm/hugetlb: add size parameter to huge_pte_offset() A poisoned or migrated hugepage is stored as a swap entry in the page tables. On architectures that support hugepages consisting of contiguous page table entries (such as on arm64) this leads to ambiguity in determining the page table entry to return in huge_pte_offset() when a poisoned entry is encountered. Let's remove the ambiguity by adding a size parameter to convey additional information about the requested address. Also fixup the definition/usage of huge_pte_offset() throughout the tree. Link: http://lkml.kernel.org/r/20170522133604.11392-4-punit.agrawal@arm.com Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Steve Capper <steve.capper@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> (odd fixer:METAG ARCHITECTURE) Cc: Ralf Baechle <ralf@linux-mips.org> (supporter:MIPS) Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-07 01:39:42 +03:00
struct vm_area_struct *vma,
unsigned long address,
unsigned long flags,
unsigned long reason)
{
struct mm_struct *mm = ctx->mm;
pte_t *ptep, pte;
bool ret = true;
mmap_assert_locked(mm);
ptep = huge_pte_offset(mm, address, vma_mmu_pagesize(vma));
if (!ptep)
goto out;
ret = false;
pte = huge_ptep_get(ptep);
/*
* Lockless access: we're in a wait_event so it's ok if it
* changes under us. PTE markers should be handled the same as none
* ptes here.
*/
if (huge_pte_none_mostly(pte))
ret = true;
if (!huge_pte_write(pte) && (reason & VM_UFFD_WP))
ret = true;
out:
return ret;
}
#else
static inline bool userfaultfd_huge_must_wait(struct userfaultfd_ctx *ctx,
mm/hugetlb: add size parameter to huge_pte_offset() A poisoned or migrated hugepage is stored as a swap entry in the page tables. On architectures that support hugepages consisting of contiguous page table entries (such as on arm64) this leads to ambiguity in determining the page table entry to return in huge_pte_offset() when a poisoned entry is encountered. Let's remove the ambiguity by adding a size parameter to convey additional information about the requested address. Also fixup the definition/usage of huge_pte_offset() throughout the tree. Link: http://lkml.kernel.org/r/20170522133604.11392-4-punit.agrawal@arm.com Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Steve Capper <steve.capper@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> (odd fixer:METAG ARCHITECTURE) Cc: Ralf Baechle <ralf@linux-mips.org> (supporter:MIPS) Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-07 01:39:42 +03:00
struct vm_area_struct *vma,
unsigned long address,
unsigned long flags,
unsigned long reason)
{
return false; /* should never get here */
}
#endif /* CONFIG_HUGETLB_PAGE */
userfaultfd: solve the race between UFFDIO_COPY|ZEROPAGE and read Solve in-kernel the race between UFFDIO_COPY|ZEROPAGE and userfaultfd_read if they are run on different threads simultaneously. Until now qemu solved the race in userland: the race was explicitly and intentionally left for userland to solve. However we can also solve it in kernel. Requiring all users to solve this race if they use two threads (one for the background transfer and one for the userfault reads) isn't very attractive from an API prospective, furthermore this allows to remove a whole bunch of mutex and bitmap code from qemu, making it faster. The cost of __get_user_pages_fast should be insignificant considering it scales perfectly and the pagetables are already hot in the CPU cache, compared to the overhead in userland to maintain those structures. Applying this patch is backwards compatible with respect to the userfaultfd userland API, however reverting this change wouldn't be backwards compatible anymore. Without this patch qemu in the background transfer thread, has to read the old state, and do UFFDIO_WAKE if old_state is missing but it become REQUESTED by the time it tries to set it to RECEIVED (signaling the other side received an userfault). vcpu background_thr userfault_thr ----- ----- ----- vcpu0 handle_mm_fault() postcopy_place_page read old_state -> MISSING UFFDIO_COPY 0x7fb76a139000 (no wakeup, still pending) vcpu0 fault at 0x7fb76a139000 enters handle_userfault poll() is kicked poll() -> POLLIN read() -> 0x7fb76a139000 postcopy_pmi_change_state(MISSING, REQUESTED) -> REQUESTED tmp_state = postcopy_pmi_change_state(old_state, RECEIVED) -> REQUESTED /* check that no userfault raced with UFFDIO_COPY */ if (old_state == MISSING && tmp_state == REQUESTED) UFFDIO_WAKE from background thread And a second case where a UFFDIO_WAKE would be needed is in the userfault thread: vcpu background_thr userfault_thr ----- ----- ----- vcpu0 handle_mm_fault() postcopy_place_page read old_state -> MISSING UFFDIO_COPY 0x7fb76a139000 (no wakeup, still pending) tmp_state = postcopy_pmi_change_state(old_state, RECEIVED) -> RECEIVED vcpu0 fault at 0x7fb76a139000 enters handle_userfault poll() is kicked poll() -> POLLIN read() -> 0x7fb76a139000 if (postcopy_pmi_change_state(MISSING, REQUESTED) == RECEIVED) UFFDIO_WAKE from userfault thread This patch removes the need of both UFFDIO_WAKE and of the associated per-page tristate as well. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:51 +03:00
/*
* Verify the pagetables are still not ok after having reigstered into
* the fault_pending_wqh to avoid userland having to UFFDIO_WAKE any
* userfault that has already been resolved, if userfaultfd_read and
* UFFDIO_COPY|ZEROPAGE are being run simultaneously on two different
* threads.
*/
static inline bool userfaultfd_must_wait(struct userfaultfd_ctx *ctx,
unsigned long address,
unsigned long flags,
unsigned long reason)
{
struct mm_struct *mm = ctx->mm;
pgd_t *pgd;
p4d_t *p4d;
userfaultfd: solve the race between UFFDIO_COPY|ZEROPAGE and read Solve in-kernel the race between UFFDIO_COPY|ZEROPAGE and userfaultfd_read if they are run on different threads simultaneously. Until now qemu solved the race in userland: the race was explicitly and intentionally left for userland to solve. However we can also solve it in kernel. Requiring all users to solve this race if they use two threads (one for the background transfer and one for the userfault reads) isn't very attractive from an API prospective, furthermore this allows to remove a whole bunch of mutex and bitmap code from qemu, making it faster. The cost of __get_user_pages_fast should be insignificant considering it scales perfectly and the pagetables are already hot in the CPU cache, compared to the overhead in userland to maintain those structures. Applying this patch is backwards compatible with respect to the userfaultfd userland API, however reverting this change wouldn't be backwards compatible anymore. Without this patch qemu in the background transfer thread, has to read the old state, and do UFFDIO_WAKE if old_state is missing but it become REQUESTED by the time it tries to set it to RECEIVED (signaling the other side received an userfault). vcpu background_thr userfault_thr ----- ----- ----- vcpu0 handle_mm_fault() postcopy_place_page read old_state -> MISSING UFFDIO_COPY 0x7fb76a139000 (no wakeup, still pending) vcpu0 fault at 0x7fb76a139000 enters handle_userfault poll() is kicked poll() -> POLLIN read() -> 0x7fb76a139000 postcopy_pmi_change_state(MISSING, REQUESTED) -> REQUESTED tmp_state = postcopy_pmi_change_state(old_state, RECEIVED) -> REQUESTED /* check that no userfault raced with UFFDIO_COPY */ if (old_state == MISSING && tmp_state == REQUESTED) UFFDIO_WAKE from background thread And a second case where a UFFDIO_WAKE would be needed is in the userfault thread: vcpu background_thr userfault_thr ----- ----- ----- vcpu0 handle_mm_fault() postcopy_place_page read old_state -> MISSING UFFDIO_COPY 0x7fb76a139000 (no wakeup, still pending) tmp_state = postcopy_pmi_change_state(old_state, RECEIVED) -> RECEIVED vcpu0 fault at 0x7fb76a139000 enters handle_userfault poll() is kicked poll() -> POLLIN read() -> 0x7fb76a139000 if (postcopy_pmi_change_state(MISSING, REQUESTED) == RECEIVED) UFFDIO_WAKE from userfault thread This patch removes the need of both UFFDIO_WAKE and of the associated per-page tristate as well. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:51 +03:00
pud_t *pud;
pmd_t *pmd, _pmd;
pte_t *pte;
bool ret = true;
mmap_assert_locked(mm);
userfaultfd: solve the race between UFFDIO_COPY|ZEROPAGE and read Solve in-kernel the race between UFFDIO_COPY|ZEROPAGE and userfaultfd_read if they are run on different threads simultaneously. Until now qemu solved the race in userland: the race was explicitly and intentionally left for userland to solve. However we can also solve it in kernel. Requiring all users to solve this race if they use two threads (one for the background transfer and one for the userfault reads) isn't very attractive from an API prospective, furthermore this allows to remove a whole bunch of mutex and bitmap code from qemu, making it faster. The cost of __get_user_pages_fast should be insignificant considering it scales perfectly and the pagetables are already hot in the CPU cache, compared to the overhead in userland to maintain those structures. Applying this patch is backwards compatible with respect to the userfaultfd userland API, however reverting this change wouldn't be backwards compatible anymore. Without this patch qemu in the background transfer thread, has to read the old state, and do UFFDIO_WAKE if old_state is missing but it become REQUESTED by the time it tries to set it to RECEIVED (signaling the other side received an userfault). vcpu background_thr userfault_thr ----- ----- ----- vcpu0 handle_mm_fault() postcopy_place_page read old_state -> MISSING UFFDIO_COPY 0x7fb76a139000 (no wakeup, still pending) vcpu0 fault at 0x7fb76a139000 enters handle_userfault poll() is kicked poll() -> POLLIN read() -> 0x7fb76a139000 postcopy_pmi_change_state(MISSING, REQUESTED) -> REQUESTED tmp_state = postcopy_pmi_change_state(old_state, RECEIVED) -> REQUESTED /* check that no userfault raced with UFFDIO_COPY */ if (old_state == MISSING && tmp_state == REQUESTED) UFFDIO_WAKE from background thread And a second case where a UFFDIO_WAKE would be needed is in the userfault thread: vcpu background_thr userfault_thr ----- ----- ----- vcpu0 handle_mm_fault() postcopy_place_page read old_state -> MISSING UFFDIO_COPY 0x7fb76a139000 (no wakeup, still pending) tmp_state = postcopy_pmi_change_state(old_state, RECEIVED) -> RECEIVED vcpu0 fault at 0x7fb76a139000 enters handle_userfault poll() is kicked poll() -> POLLIN read() -> 0x7fb76a139000 if (postcopy_pmi_change_state(MISSING, REQUESTED) == RECEIVED) UFFDIO_WAKE from userfault thread This patch removes the need of both UFFDIO_WAKE and of the associated per-page tristate as well. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:51 +03:00
pgd = pgd_offset(mm, address);
if (!pgd_present(*pgd))
goto out;
p4d = p4d_offset(pgd, address);
if (!p4d_present(*p4d))
goto out;
pud = pud_offset(p4d, address);
userfaultfd: solve the race between UFFDIO_COPY|ZEROPAGE and read Solve in-kernel the race between UFFDIO_COPY|ZEROPAGE and userfaultfd_read if they are run on different threads simultaneously. Until now qemu solved the race in userland: the race was explicitly and intentionally left for userland to solve. However we can also solve it in kernel. Requiring all users to solve this race if they use two threads (one for the background transfer and one for the userfault reads) isn't very attractive from an API prospective, furthermore this allows to remove a whole bunch of mutex and bitmap code from qemu, making it faster. The cost of __get_user_pages_fast should be insignificant considering it scales perfectly and the pagetables are already hot in the CPU cache, compared to the overhead in userland to maintain those structures. Applying this patch is backwards compatible with respect to the userfaultfd userland API, however reverting this change wouldn't be backwards compatible anymore. Without this patch qemu in the background transfer thread, has to read the old state, and do UFFDIO_WAKE if old_state is missing but it become REQUESTED by the time it tries to set it to RECEIVED (signaling the other side received an userfault). vcpu background_thr userfault_thr ----- ----- ----- vcpu0 handle_mm_fault() postcopy_place_page read old_state -> MISSING UFFDIO_COPY 0x7fb76a139000 (no wakeup, still pending) vcpu0 fault at 0x7fb76a139000 enters handle_userfault poll() is kicked poll() -> POLLIN read() -> 0x7fb76a139000 postcopy_pmi_change_state(MISSING, REQUESTED) -> REQUESTED tmp_state = postcopy_pmi_change_state(old_state, RECEIVED) -> REQUESTED /* check that no userfault raced with UFFDIO_COPY */ if (old_state == MISSING && tmp_state == REQUESTED) UFFDIO_WAKE from background thread And a second case where a UFFDIO_WAKE would be needed is in the userfault thread: vcpu background_thr userfault_thr ----- ----- ----- vcpu0 handle_mm_fault() postcopy_place_page read old_state -> MISSING UFFDIO_COPY 0x7fb76a139000 (no wakeup, still pending) tmp_state = postcopy_pmi_change_state(old_state, RECEIVED) -> RECEIVED vcpu0 fault at 0x7fb76a139000 enters handle_userfault poll() is kicked poll() -> POLLIN read() -> 0x7fb76a139000 if (postcopy_pmi_change_state(MISSING, REQUESTED) == RECEIVED) UFFDIO_WAKE from userfault thread This patch removes the need of both UFFDIO_WAKE and of the associated per-page tristate as well. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:51 +03:00
if (!pud_present(*pud))
goto out;
pmd = pmd_offset(pud, address);
/*
* READ_ONCE must function as a barrier with narrower scope
* and it must be equivalent to:
* _pmd = *pmd; barrier();
*
* This is to deal with the instability (as in
* pmd_trans_unstable) of the pmd.
*/
_pmd = READ_ONCE(*pmd);
mm, userfaultfd, THP: avoid waiting when PMD under THP migration If THP migration is enabled, for a VMA handled by userfaultfd, consider the following situation, do_page_fault() __do_huge_pmd_anonymous_page() handle_userfault() userfault_msg() /* a huge page is allocated and mapped at fault address */ /* the huge page is under migration, leaves migration entry in page table */ userfaultfd_must_wait() /* return true because !pmd_present() */ /* may wait in loop until fatal signal */ That is, it may be possible for userfaultfd_must_wait() encounters a PMD entry which is !pmd_none() && !pmd_present(). In the current implementation, we will wait for such PMD entries, which may cause unnecessary waiting, and potential soft lockup. This is fixed via avoiding to wait when !pmd_none() && !pmd_present(), only wait when pmd_none(). This may be not a problem in practice, because userfaultfd_must_wait() is always called with mm->mmap_sem read-locked. mremap() will write-lock mm->mmap_sem. And UFFDIO_COPY doesn't support to copy THP mapping. But the change introduced still makes the code more correct, and makes the PMD and PTE code more consistent. Link: http://lkml.kernel.org/r/20171207011752.3292-1-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.UK> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-01 03:17:32 +03:00
if (pmd_none(_pmd))
userfaultfd: solve the race between UFFDIO_COPY|ZEROPAGE and read Solve in-kernel the race between UFFDIO_COPY|ZEROPAGE and userfaultfd_read if they are run on different threads simultaneously. Until now qemu solved the race in userland: the race was explicitly and intentionally left for userland to solve. However we can also solve it in kernel. Requiring all users to solve this race if they use two threads (one for the background transfer and one for the userfault reads) isn't very attractive from an API prospective, furthermore this allows to remove a whole bunch of mutex and bitmap code from qemu, making it faster. The cost of __get_user_pages_fast should be insignificant considering it scales perfectly and the pagetables are already hot in the CPU cache, compared to the overhead in userland to maintain those structures. Applying this patch is backwards compatible with respect to the userfaultfd userland API, however reverting this change wouldn't be backwards compatible anymore. Without this patch qemu in the background transfer thread, has to read the old state, and do UFFDIO_WAKE if old_state is missing but it become REQUESTED by the time it tries to set it to RECEIVED (signaling the other side received an userfault). vcpu background_thr userfault_thr ----- ----- ----- vcpu0 handle_mm_fault() postcopy_place_page read old_state -> MISSING UFFDIO_COPY 0x7fb76a139000 (no wakeup, still pending) vcpu0 fault at 0x7fb76a139000 enters handle_userfault poll() is kicked poll() -> POLLIN read() -> 0x7fb76a139000 postcopy_pmi_change_state(MISSING, REQUESTED) -> REQUESTED tmp_state = postcopy_pmi_change_state(old_state, RECEIVED) -> REQUESTED /* check that no userfault raced with UFFDIO_COPY */ if (old_state == MISSING && tmp_state == REQUESTED) UFFDIO_WAKE from background thread And a second case where a UFFDIO_WAKE would be needed is in the userfault thread: vcpu background_thr userfault_thr ----- ----- ----- vcpu0 handle_mm_fault() postcopy_place_page read old_state -> MISSING UFFDIO_COPY 0x7fb76a139000 (no wakeup, still pending) tmp_state = postcopy_pmi_change_state(old_state, RECEIVED) -> RECEIVED vcpu0 fault at 0x7fb76a139000 enters handle_userfault poll() is kicked poll() -> POLLIN read() -> 0x7fb76a139000 if (postcopy_pmi_change_state(MISSING, REQUESTED) == RECEIVED) UFFDIO_WAKE from userfault thread This patch removes the need of both UFFDIO_WAKE and of the associated per-page tristate as well. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:51 +03:00
goto out;
ret = false;
mm, userfaultfd, THP: avoid waiting when PMD under THP migration If THP migration is enabled, for a VMA handled by userfaultfd, consider the following situation, do_page_fault() __do_huge_pmd_anonymous_page() handle_userfault() userfault_msg() /* a huge page is allocated and mapped at fault address */ /* the huge page is under migration, leaves migration entry in page table */ userfaultfd_must_wait() /* return true because !pmd_present() */ /* may wait in loop until fatal signal */ That is, it may be possible for userfaultfd_must_wait() encounters a PMD entry which is !pmd_none() && !pmd_present(). In the current implementation, we will wait for such PMD entries, which may cause unnecessary waiting, and potential soft lockup. This is fixed via avoiding to wait when !pmd_none() && !pmd_present(), only wait when pmd_none(). This may be not a problem in practice, because userfaultfd_must_wait() is always called with mm->mmap_sem read-locked. mremap() will write-lock mm->mmap_sem. And UFFDIO_COPY doesn't support to copy THP mapping. But the change introduced still makes the code more correct, and makes the PMD and PTE code more consistent. Link: http://lkml.kernel.org/r/20171207011752.3292-1-ying.huang@intel.com Signed-off-by: "Huang, Ying" <ying.huang@intel.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Alexander Viro <viro@zeniv.linux.org.UK> Cc: Zi Yan <zi.yan@cs.rutgers.edu> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-02-01 03:17:32 +03:00
if (!pmd_present(_pmd))
goto out;
userfaultfd: wp: add the writeprotect API to userfaultfd ioctl Introduce the new uffd-wp APIs for userspace. Firstly, we'll allow to do UFFDIO_REGISTER with write protection tracking using the new UFFDIO_REGISTER_MODE_WP flag. Note that this flag can co-exist with the existing UFFDIO_REGISTER_MODE_MISSING, in which case the userspace program can not only resolve missing page faults, and at the same time tracking page data changes along the way. Secondly, we introduced the new UFFDIO_WRITEPROTECT API to do page level write protection tracking. Note that we will need to register the memory region with UFFDIO_REGISTER_MODE_WP before that. [peterx@redhat.com: write up the commit message] [peterx@redhat.com: remove useless block, write commit message, check against VM_MAYWRITE rather than VM_WRITE when register] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-14-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 06:06:12 +03:00
if (pmd_trans_huge(_pmd)) {
if (!pmd_write(_pmd) && (reason & VM_UFFD_WP))
ret = true;
userfaultfd: solve the race between UFFDIO_COPY|ZEROPAGE and read Solve in-kernel the race between UFFDIO_COPY|ZEROPAGE and userfaultfd_read if they are run on different threads simultaneously. Until now qemu solved the race in userland: the race was explicitly and intentionally left for userland to solve. However we can also solve it in kernel. Requiring all users to solve this race if they use two threads (one for the background transfer and one for the userfault reads) isn't very attractive from an API prospective, furthermore this allows to remove a whole bunch of mutex and bitmap code from qemu, making it faster. The cost of __get_user_pages_fast should be insignificant considering it scales perfectly and the pagetables are already hot in the CPU cache, compared to the overhead in userland to maintain those structures. Applying this patch is backwards compatible with respect to the userfaultfd userland API, however reverting this change wouldn't be backwards compatible anymore. Without this patch qemu in the background transfer thread, has to read the old state, and do UFFDIO_WAKE if old_state is missing but it become REQUESTED by the time it tries to set it to RECEIVED (signaling the other side received an userfault). vcpu background_thr userfault_thr ----- ----- ----- vcpu0 handle_mm_fault() postcopy_place_page read old_state -> MISSING UFFDIO_COPY 0x7fb76a139000 (no wakeup, still pending) vcpu0 fault at 0x7fb76a139000 enters handle_userfault poll() is kicked poll() -> POLLIN read() -> 0x7fb76a139000 postcopy_pmi_change_state(MISSING, REQUESTED) -> REQUESTED tmp_state = postcopy_pmi_change_state(old_state, RECEIVED) -> REQUESTED /* check that no userfault raced with UFFDIO_COPY */ if (old_state == MISSING && tmp_state == REQUESTED) UFFDIO_WAKE from background thread And a second case where a UFFDIO_WAKE would be needed is in the userfault thread: vcpu background_thr userfault_thr ----- ----- ----- vcpu0 handle_mm_fault() postcopy_place_page read old_state -> MISSING UFFDIO_COPY 0x7fb76a139000 (no wakeup, still pending) tmp_state = postcopy_pmi_change_state(old_state, RECEIVED) -> RECEIVED vcpu0 fault at 0x7fb76a139000 enters handle_userfault poll() is kicked poll() -> POLLIN read() -> 0x7fb76a139000 if (postcopy_pmi_change_state(MISSING, REQUESTED) == RECEIVED) UFFDIO_WAKE from userfault thread This patch removes the need of both UFFDIO_WAKE and of the associated per-page tristate as well. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:51 +03:00
goto out;
userfaultfd: wp: add the writeprotect API to userfaultfd ioctl Introduce the new uffd-wp APIs for userspace. Firstly, we'll allow to do UFFDIO_REGISTER with write protection tracking using the new UFFDIO_REGISTER_MODE_WP flag. Note that this flag can co-exist with the existing UFFDIO_REGISTER_MODE_MISSING, in which case the userspace program can not only resolve missing page faults, and at the same time tracking page data changes along the way. Secondly, we introduced the new UFFDIO_WRITEPROTECT API to do page level write protection tracking. Note that we will need to register the memory region with UFFDIO_REGISTER_MODE_WP before that. [peterx@redhat.com: write up the commit message] [peterx@redhat.com: remove useless block, write commit message, check against VM_MAYWRITE rather than VM_WRITE when register] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-14-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 06:06:12 +03:00
}
userfaultfd: solve the race between UFFDIO_COPY|ZEROPAGE and read Solve in-kernel the race between UFFDIO_COPY|ZEROPAGE and userfaultfd_read if they are run on different threads simultaneously. Until now qemu solved the race in userland: the race was explicitly and intentionally left for userland to solve. However we can also solve it in kernel. Requiring all users to solve this race if they use two threads (one for the background transfer and one for the userfault reads) isn't very attractive from an API prospective, furthermore this allows to remove a whole bunch of mutex and bitmap code from qemu, making it faster. The cost of __get_user_pages_fast should be insignificant considering it scales perfectly and the pagetables are already hot in the CPU cache, compared to the overhead in userland to maintain those structures. Applying this patch is backwards compatible with respect to the userfaultfd userland API, however reverting this change wouldn't be backwards compatible anymore. Without this patch qemu in the background transfer thread, has to read the old state, and do UFFDIO_WAKE if old_state is missing but it become REQUESTED by the time it tries to set it to RECEIVED (signaling the other side received an userfault). vcpu background_thr userfault_thr ----- ----- ----- vcpu0 handle_mm_fault() postcopy_place_page read old_state -> MISSING UFFDIO_COPY 0x7fb76a139000 (no wakeup, still pending) vcpu0 fault at 0x7fb76a139000 enters handle_userfault poll() is kicked poll() -> POLLIN read() -> 0x7fb76a139000 postcopy_pmi_change_state(MISSING, REQUESTED) -> REQUESTED tmp_state = postcopy_pmi_change_state(old_state, RECEIVED) -> REQUESTED /* check that no userfault raced with UFFDIO_COPY */ if (old_state == MISSING && tmp_state == REQUESTED) UFFDIO_WAKE from background thread And a second case where a UFFDIO_WAKE would be needed is in the userfault thread: vcpu background_thr userfault_thr ----- ----- ----- vcpu0 handle_mm_fault() postcopy_place_page read old_state -> MISSING UFFDIO_COPY 0x7fb76a139000 (no wakeup, still pending) tmp_state = postcopy_pmi_change_state(old_state, RECEIVED) -> RECEIVED vcpu0 fault at 0x7fb76a139000 enters handle_userfault poll() is kicked poll() -> POLLIN read() -> 0x7fb76a139000 if (postcopy_pmi_change_state(MISSING, REQUESTED) == RECEIVED) UFFDIO_WAKE from userfault thread This patch removes the need of both UFFDIO_WAKE and of the associated per-page tristate as well. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:51 +03:00
/*
* the pmd is stable (as in !pmd_trans_unstable) so we can re-read it
* and use the standard pte_offset_map() instead of parsing _pmd.
*/
pte = pte_offset_map(pmd, address);
/*
* Lockless access: we're in a wait_event so it's ok if it
* changes under us. PTE markers should be handled the same as none
* ptes here.
userfaultfd: solve the race between UFFDIO_COPY|ZEROPAGE and read Solve in-kernel the race between UFFDIO_COPY|ZEROPAGE and userfaultfd_read if they are run on different threads simultaneously. Until now qemu solved the race in userland: the race was explicitly and intentionally left for userland to solve. However we can also solve it in kernel. Requiring all users to solve this race if they use two threads (one for the background transfer and one for the userfault reads) isn't very attractive from an API prospective, furthermore this allows to remove a whole bunch of mutex and bitmap code from qemu, making it faster. The cost of __get_user_pages_fast should be insignificant considering it scales perfectly and the pagetables are already hot in the CPU cache, compared to the overhead in userland to maintain those structures. Applying this patch is backwards compatible with respect to the userfaultfd userland API, however reverting this change wouldn't be backwards compatible anymore. Without this patch qemu in the background transfer thread, has to read the old state, and do UFFDIO_WAKE if old_state is missing but it become REQUESTED by the time it tries to set it to RECEIVED (signaling the other side received an userfault). vcpu background_thr userfault_thr ----- ----- ----- vcpu0 handle_mm_fault() postcopy_place_page read old_state -> MISSING UFFDIO_COPY 0x7fb76a139000 (no wakeup, still pending) vcpu0 fault at 0x7fb76a139000 enters handle_userfault poll() is kicked poll() -> POLLIN read() -> 0x7fb76a139000 postcopy_pmi_change_state(MISSING, REQUESTED) -> REQUESTED tmp_state = postcopy_pmi_change_state(old_state, RECEIVED) -> REQUESTED /* check that no userfault raced with UFFDIO_COPY */ if (old_state == MISSING && tmp_state == REQUESTED) UFFDIO_WAKE from background thread And a second case where a UFFDIO_WAKE would be needed is in the userfault thread: vcpu background_thr userfault_thr ----- ----- ----- vcpu0 handle_mm_fault() postcopy_place_page read old_state -> MISSING UFFDIO_COPY 0x7fb76a139000 (no wakeup, still pending) tmp_state = postcopy_pmi_change_state(old_state, RECEIVED) -> RECEIVED vcpu0 fault at 0x7fb76a139000 enters handle_userfault poll() is kicked poll() -> POLLIN read() -> 0x7fb76a139000 if (postcopy_pmi_change_state(MISSING, REQUESTED) == RECEIVED) UFFDIO_WAKE from userfault thread This patch removes the need of both UFFDIO_WAKE and of the associated per-page tristate as well. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:51 +03:00
*/
if (pte_none_mostly(*pte))
userfaultfd: solve the race between UFFDIO_COPY|ZEROPAGE and read Solve in-kernel the race between UFFDIO_COPY|ZEROPAGE and userfaultfd_read if they are run on different threads simultaneously. Until now qemu solved the race in userland: the race was explicitly and intentionally left for userland to solve. However we can also solve it in kernel. Requiring all users to solve this race if they use two threads (one for the background transfer and one for the userfault reads) isn't very attractive from an API prospective, furthermore this allows to remove a whole bunch of mutex and bitmap code from qemu, making it faster. The cost of __get_user_pages_fast should be insignificant considering it scales perfectly and the pagetables are already hot in the CPU cache, compared to the overhead in userland to maintain those structures. Applying this patch is backwards compatible with respect to the userfaultfd userland API, however reverting this change wouldn't be backwards compatible anymore. Without this patch qemu in the background transfer thread, has to read the old state, and do UFFDIO_WAKE if old_state is missing but it become REQUESTED by the time it tries to set it to RECEIVED (signaling the other side received an userfault). vcpu background_thr userfault_thr ----- ----- ----- vcpu0 handle_mm_fault() postcopy_place_page read old_state -> MISSING UFFDIO_COPY 0x7fb76a139000 (no wakeup, still pending) vcpu0 fault at 0x7fb76a139000 enters handle_userfault poll() is kicked poll() -> POLLIN read() -> 0x7fb76a139000 postcopy_pmi_change_state(MISSING, REQUESTED) -> REQUESTED tmp_state = postcopy_pmi_change_state(old_state, RECEIVED) -> REQUESTED /* check that no userfault raced with UFFDIO_COPY */ if (old_state == MISSING && tmp_state == REQUESTED) UFFDIO_WAKE from background thread And a second case where a UFFDIO_WAKE would be needed is in the userfault thread: vcpu background_thr userfault_thr ----- ----- ----- vcpu0 handle_mm_fault() postcopy_place_page read old_state -> MISSING UFFDIO_COPY 0x7fb76a139000 (no wakeup, still pending) tmp_state = postcopy_pmi_change_state(old_state, RECEIVED) -> RECEIVED vcpu0 fault at 0x7fb76a139000 enters handle_userfault poll() is kicked poll() -> POLLIN read() -> 0x7fb76a139000 if (postcopy_pmi_change_state(MISSING, REQUESTED) == RECEIVED) UFFDIO_WAKE from userfault thread This patch removes the need of both UFFDIO_WAKE and of the associated per-page tristate as well. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:51 +03:00
ret = true;
userfaultfd: wp: add the writeprotect API to userfaultfd ioctl Introduce the new uffd-wp APIs for userspace. Firstly, we'll allow to do UFFDIO_REGISTER with write protection tracking using the new UFFDIO_REGISTER_MODE_WP flag. Note that this flag can co-exist with the existing UFFDIO_REGISTER_MODE_MISSING, in which case the userspace program can not only resolve missing page faults, and at the same time tracking page data changes along the way. Secondly, we introduced the new UFFDIO_WRITEPROTECT API to do page level write protection tracking. Note that we will need to register the memory region with UFFDIO_REGISTER_MODE_WP before that. [peterx@redhat.com: write up the commit message] [peterx@redhat.com: remove useless block, write commit message, check against VM_MAYWRITE rather than VM_WRITE when register] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-14-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 06:06:12 +03:00
if (!pte_write(*pte) && (reason & VM_UFFD_WP))
ret = true;
userfaultfd: solve the race between UFFDIO_COPY|ZEROPAGE and read Solve in-kernel the race between UFFDIO_COPY|ZEROPAGE and userfaultfd_read if they are run on different threads simultaneously. Until now qemu solved the race in userland: the race was explicitly and intentionally left for userland to solve. However we can also solve it in kernel. Requiring all users to solve this race if they use two threads (one for the background transfer and one for the userfault reads) isn't very attractive from an API prospective, furthermore this allows to remove a whole bunch of mutex and bitmap code from qemu, making it faster. The cost of __get_user_pages_fast should be insignificant considering it scales perfectly and the pagetables are already hot in the CPU cache, compared to the overhead in userland to maintain those structures. Applying this patch is backwards compatible with respect to the userfaultfd userland API, however reverting this change wouldn't be backwards compatible anymore. Without this patch qemu in the background transfer thread, has to read the old state, and do UFFDIO_WAKE if old_state is missing but it become REQUESTED by the time it tries to set it to RECEIVED (signaling the other side received an userfault). vcpu background_thr userfault_thr ----- ----- ----- vcpu0 handle_mm_fault() postcopy_place_page read old_state -> MISSING UFFDIO_COPY 0x7fb76a139000 (no wakeup, still pending) vcpu0 fault at 0x7fb76a139000 enters handle_userfault poll() is kicked poll() -> POLLIN read() -> 0x7fb76a139000 postcopy_pmi_change_state(MISSING, REQUESTED) -> REQUESTED tmp_state = postcopy_pmi_change_state(old_state, RECEIVED) -> REQUESTED /* check that no userfault raced with UFFDIO_COPY */ if (old_state == MISSING && tmp_state == REQUESTED) UFFDIO_WAKE from background thread And a second case where a UFFDIO_WAKE would be needed is in the userfault thread: vcpu background_thr userfault_thr ----- ----- ----- vcpu0 handle_mm_fault() postcopy_place_page read old_state -> MISSING UFFDIO_COPY 0x7fb76a139000 (no wakeup, still pending) tmp_state = postcopy_pmi_change_state(old_state, RECEIVED) -> RECEIVED vcpu0 fault at 0x7fb76a139000 enters handle_userfault poll() is kicked poll() -> POLLIN read() -> 0x7fb76a139000 if (postcopy_pmi_change_state(MISSING, REQUESTED) == RECEIVED) UFFDIO_WAKE from userfault thread This patch removes the need of both UFFDIO_WAKE and of the associated per-page tristate as well. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:51 +03:00
pte_unmap(pte);
out:
return ret;
}
static inline unsigned int userfaultfd_get_blocking_state(unsigned int flags)
mm/userfaultfd: honor FAULT_FLAG_KILLABLE in fault path Userfaultfd fault path was by default killable even if the caller does not have FAULT_FLAG_KILLABLE. That makes sense before in that when with gup we don't have FAULT_FLAG_KILLABLE properly set before. Now after previous patch we've got FAULT_FLAG_KILLABLE applied even for gup code so it should also make sense to let userfaultfd to honor the FAULT_FLAG_KILLABLE. Because we're unconditionally setting FAULT_FLAG_KILLABLE in gup code right now, this patch should have no functional change. It also cleaned the code a little bit by introducing some helpers. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Brian Geffon <bgeffon@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Matthew Wilcox <willy@infradead.org> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Link: http://lkml.kernel.org/r/20200220160300.9941-1-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 07:09:00 +03:00
{
if (flags & FAULT_FLAG_INTERRUPTIBLE)
return TASK_INTERRUPTIBLE;
if (flags & FAULT_FLAG_KILLABLE)
return TASK_KILLABLE;
return TASK_UNINTERRUPTIBLE;
}
/*
* The locking rules involved in returning VM_FAULT_RETRY depending on
* FAULT_FLAG_ALLOW_RETRY, FAULT_FLAG_RETRY_NOWAIT and
* FAULT_FLAG_KILLABLE are not straightforward. The "Caution"
* recommendation in __lock_page_or_retry is not an understatement.
*
* If FAULT_FLAG_ALLOW_RETRY is set, the mmap_lock must be released
* before returning VM_FAULT_RETRY only if FAULT_FLAG_RETRY_NOWAIT is
* not set.
*
* If FAULT_FLAG_ALLOW_RETRY is set but FAULT_FLAG_KILLABLE is not
* set, VM_FAULT_RETRY can still be returned if and only if there are
* fatal_signal_pending()s, and the mmap_lock must be released before
* returning it.
*/
vm_fault_t handle_userfault(struct vm_fault *vmf, unsigned long reason)
{
struct mm_struct *mm = vmf->vma->vm_mm;
struct userfaultfd_ctx *ctx;
struct userfaultfd_wait_queue uwq;
vm_fault_t ret = VM_FAULT_SIGBUS;
mm/userfaultfd: honor FAULT_FLAG_KILLABLE in fault path Userfaultfd fault path was by default killable even if the caller does not have FAULT_FLAG_KILLABLE. That makes sense before in that when with gup we don't have FAULT_FLAG_KILLABLE properly set before. Now after previous patch we've got FAULT_FLAG_KILLABLE applied even for gup code so it should also make sense to let userfaultfd to honor the FAULT_FLAG_KILLABLE. Because we're unconditionally setting FAULT_FLAG_KILLABLE in gup code right now, this patch should have no functional change. It also cleaned the code a little bit by introducing some helpers. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Brian Geffon <bgeffon@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Matthew Wilcox <willy@infradead.org> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Link: http://lkml.kernel.org/r/20200220160300.9941-1-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 07:09:00 +03:00
bool must_wait;
unsigned int blocking_state;
/*
* We don't do userfault handling for the final child pid update.
*
* We also don't do userfault handling during
* coredumping. hugetlbfs has the special
* follow_hugetlb_page() to skip missing pages in the
* FOLL_DUMP case, anon memory also checks for FOLL_DUMP with
* the no_page_table() helper in follow_page_mask(), but the
* shmem_vm_ops->fault method is invoked even during
* coredumping without mmap_lock and it ends up here.
*/
if (current->flags & (PF_EXITING|PF_DUMPCORE))
goto out;
/*
* Coredumping runs without mmap_lock so we can only check that
* the mmap_lock is held, if PF_DUMPCORE was not set.
*/
mmap_assert_locked(mm);
ctx = vmf->vma->vm_userfaultfd_ctx.ctx;
if (!ctx)
userfaultfd: wake pending userfaults This is an optimization but it's a userland visible one and it affects the API. The downside of this optimization is that if you call poll() and you get POLLIN, read(ufd) may still return -EAGAIN. The blocked userfault may be waken by a different thread, before read(ufd) comes around. This in short means that poll() isn't really usable if the userfaultfd is opened in blocking mode. userfaults won't wait in "pending" state to be read anymore and any UFFDIO_WAKE or similar operations that has the objective of waking userfaults after their resolution, will wake all blocked userfaults for the resolved range, including those that haven't been read() by userland yet. The behavior of poll() becomes not standard, but this obviates the need of "spurious" UFFDIO_WAKE and it lets the userland threads to restart immediately without requiring an UFFDIO_WAKE. This is even more significant in case of repeated faults on the same address from multiple threads. This optimization is justified by the measurement that the number of spurious UFFDIO_WAKE accounts for 5% and 10% of the total userfaults for heavy workloads, so it's worth optimizing those away. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:41 +03:00
goto out;
BUG_ON(ctx->mm != mm);
userfaultfd: add minor fault registration mode Patch series "userfaultfd: add minor fault handling", v9. Overview ======== This series adds a new userfaultfd feature, UFFD_FEATURE_MINOR_HUGETLBFS. When enabled (via the UFFDIO_API ioctl), this feature means that any hugetlbfs VMAs registered with UFFDIO_REGISTER_MODE_MISSING will *also* get events for "minor" faults. By "minor" fault, I mean the following situation: Let there exist two mappings (i.e., VMAs) to the same page(s) (shared memory). One of the mappings is registered with userfaultfd (in minor mode), and the other is not. Via the non-UFFD mapping, the underlying pages have already been allocated & filled with some contents. The UFFD mapping has not yet been faulted in; when it is touched for the first time, this results in what I'm calling a "minor" fault. As a concrete example, when working with hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing page. We also add a new ioctl to resolve such faults: UFFDIO_CONTINUE. The idea is, userspace resolves the fault by either a) doing nothing if the contents are already correct, or b) updating the underlying contents using the second, non-UFFD mapping (via memcpy/memset or similar, or something fancier like RDMA, or etc...). In either case, userspace issues UFFDIO_CONTINUE to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". Use Case ======== Consider the use case of VM live migration (e.g. under QEMU/KVM): 1. While a VM is still running, we copy the contents of its memory to a target machine. The pages are populated on the target by writing to the non-UFFD mapping, using the setup described above. The VM is still running (and therefore its memory is likely changing), so this may be repeated several times, until we decide the target is "up to date enough". 2. We pause the VM on the source, and start executing on the target machine. During this gap, the VM's user(s) will *see* a pause, so it is desirable to minimize this window. 3. Between the last time any page was copied from the source to the target, and when the VM was paused, the contents of that page may have changed - and therefore the copy we have on the target machine is out of date. Although we can keep track of which pages are out of date, for VMs with large amounts of memory, it is "slow" to transfer this information to the target machine. We want to resume execution before such a transfer would complete. 4. So, the guest begins executing on the target machine. The first time it touches its memory (via the UFFD-registered mapping), userspace wants to intercept this fault. Userspace checks whether or not the page is up to date, and if not, copies the updated page from the source machine, via the non-UFFD mapping. Finally, whether a copy was performed or not, userspace issues a UFFDIO_CONTINUE ioctl to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". We don't have to do all of the final updates on-demand. The userfaultfd manager can, in the background, also copy over updated pages once it receives the map of which pages are up-to-date or not. Interaction with Existing APIs ============================== Because this is a feature, a registered VMA could potentially receive both missing and minor faults. I spent some time thinking through how the existing API interacts with the new feature: UFFDIO_CONTINUE cannot be used to resolve non-minor faults, as it does not allocate a new page. If UFFDIO_CONTINUE is used on a non-minor fault: - For non-shared memory or shmem, -EINVAL is returned. - For hugetlb, -EFAULT is returned. UFFDIO_COPY and UFFDIO_ZEROPAGE cannot be used to resolve minor faults. Without modifications, the existing codepath assumes a new page needs to be allocated. This is okay, since userspace must have a second non-UFFD-registered mapping anyway, thus there isn't much reason to want to use these in any case (just memcpy or memset or similar). - If UFFDIO_COPY is used on a minor fault, -EEXIST is returned. - If UFFDIO_ZEROPAGE is used on a minor fault, -EEXIST is returned (or -EINVAL in the case of hugetlb, as UFFDIO_ZEROPAGE is unsupported in any case). - UFFDIO_WRITEPROTECT simply doesn't work with shared memory, and returns -ENOENT in that case (regardless of the kind of fault). Future Work =========== This series only supports hugetlbfs. I have a second series in flight to support shmem as well, extending the functionality. This series is more mature than the shmem support at this point, and the functionality works fully on hugetlbfs, so this series can be merged first and then shmem support will follow. This patch (of 6): This feature allows userspace to intercept "minor" faults. By "minor" faults, I mean the following situation: Let there exist two mappings (i.e., VMAs) to the same page(s). One of the mappings is registered with userfaultfd (in minor mode), and the other is not. Via the non-UFFD mapping, the underlying pages have already been allocated & filled with some contents. The UFFD mapping has not yet been faulted in; when it is touched for the first time, this results in what I'm calling a "minor" fault. As a concrete example, when working with hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing page. This commit adds the new registration mode, and sets the relevant flag on the VMAs being registered. In the hugetlb fault path, if we find that we have huge_pte_none(), but find_lock_page() does indeed find an existing page, then we have a "minor" fault, and if the VMA has the userfaultfd registration flag, we call into userfaultfd to handle it. This is implemented as a new registration mode, instead of an API feature. This is because the alternative implementation has significant drawbacks [1]. However, doing it this was requires we allocate a VM_* flag for the new registration mode. On 32-bit systems, there are no unused bits, so this feature is only supported on architectures with CONFIG_ARCH_USES_HIGH_VMA_FLAGS. When attempting to register a VMA in MINOR mode on 32-bit architectures, we return -EINVAL. [1] https://lore.kernel.org/patchwork/patch/1380226/ [peterx@redhat.com: fix minor fault page leak] Link: https://lkml.kernel.org/r/20210322175132.36659-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20210301222728.176417-1-axelrasmussen@google.com Link: https://lkml.kernel.org/r/20210301222728.176417-2-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michal Koutn" <mkoutny@suse.com> Cc: Michel Lespinasse <walken@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: Shawn Anastasio <shawn@anastas.io> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Steven Price <steven.price@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Adam Ruprecht <ruprecht@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Cannon Matthews <cannonmatthews@google.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Oliver Upton <oupton@google.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 04:35:36 +03:00
/* Any unrecognized flag is a bug. */
VM_BUG_ON(reason & ~__VM_UFFD_FLAGS);
/* 0 or > 1 flags set is a bug; we expect exactly 1. */
VM_BUG_ON(!reason || (reason & (reason - 1)));
mm: userfaultfd: add feature to request for a signal delivery In some cases, userfaultfd mechanism should just deliver a SIGBUS signal to the faulting process, instead of the page-fault event. Dealing with page-fault event using a monitor thread can be an overhead in these cases. For example applications like the database could use the signaling mechanism for robustness purpose. Database uses hugetlbfs for performance reason. Files on hugetlbfs filesystem are created and huge pages allocated using fallocate() API. Pages are deallocated/freed using fallocate() hole punching support. These files are mmapped and accessed by many processes as shared memory. The database keeps track of which offsets in the hugetlbfs file have pages allocated. Any access to mapped address over holes in the file, which can occur due to bugs in the application, is considered invalid and expect the process to simply receive a SIGBUS. However, currently when a hole in the file is accessed via the mapped address, kernel/mm attempts to automatically allocate a page at page fault time, resulting in implicitly filling the hole in the file. This may not be the desired behavior for applications like the database that want to explicitly manage page allocations of hugetlbfs files. Using userfaultfd mechanism with this support to get a signal, database application can prevent pages from being allocated implicitly when processes access mapped address over holes in the file. This patch adds UFFD_FEATURE_SIGBUS feature to userfaultfd mechnism to request for a SIGBUS signal. See following for previous discussion about the database requirement leading to this proposal as suggested by Andrea. http://www.spinics.net/lists/linux-mm/msg129224.html Link: http://lkml.kernel.org/r/1501552446-748335-2-git-send-email-prakash.sangappa@oracle.com Signed-off-by: Prakash Sangappa <prakash.sangappa@oracle.com> Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 02:23:39 +03:00
if (ctx->features & UFFD_FEATURE_SIGBUS)
goto out;
userfaultfd: add UFFD_USER_MODE_ONLY Patch series "Control over userfaultfd kernel-fault handling", v6. This patch series is split from [1]. The other series enables SELinux support for userfaultfd file descriptors so that its creation and movement can be controlled. It has been demonstrated on various occasions that suspending kernel code execution for an arbitrary amount of time at any access to userspace memory (copy_from_user()/copy_to_user()/...) can be exploited to change the intended behavior of the kernel. For instance, handling page faults in kernel-mode using userfaultfd has been exploited in [2, 3]. Likewise, FUSE, which is similar to userfaultfd in this respect, has been exploited in [4, 5] for similar outcome. This small patch series adds a new flag to userfaultfd(2) that allows callers to give up the ability to handle kernel-mode faults with the resulting UFFD file object. It then adds a 'user-mode only' option to the unprivileged_userfaultfd sysctl knob to require unprivileged callers to use this new flag. The purpose of this new interface is to decrease the chance of an unprivileged userfaultfd user taking advantage of userfaultfd to enhance security vulnerabilities by lengthening the race window in kernel code. [1] https://lore.kernel.org/lkml/20200211225547.235083-1-dancol@google.com/ [2] https://duasynt.com/blog/linux-kernel-heap-spray [3] https://duasynt.com/blog/cve-2016-6187-heap-off-by-one-exploit [4] https://googleprojectzero.blogspot.com/2016/06/exploiting-recursion-in-linux-kernel_20.html [5] https://bugs.chromium.org/p/project-zero/issues/detail?id=808 This patch (of 2): userfaultfd handles page faults from both user and kernel code. Add a new UFFD_USER_MODE_ONLY flag for userfaultfd(2) that makes the resulting userfaultfd object refuse to handle faults from kernel mode, treating these faults as if SIGBUS were always raised, causing the kernel code to fail with EFAULT. A future patch adds a knob allowing administrators to give some processes the ability to create userfaultfd file objects only if they pass UFFD_USER_MODE_ONLY, reducing the likelihood that these processes will exploit userfaultfd's ability to delay kernel page faults to open timing windows for future exploits. Link: https://lkml.kernel.org/r/20201120030411.2690816-1-lokeshgidra@google.com Link: https://lkml.kernel.org/r/20201120030411.2690816-2-lokeshgidra@google.com Signed-off-by: Daniel Colascione <dancol@google.com> Signed-off-by: Lokesh Gidra <lokeshgidra@google.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: <calin@google.com> Cc: Daniel Colascione <dancol@dancol.org> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Joel Fernandes (Google)" <joel@joelfernandes.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nitin Gupta <nigupta@nvidia.com> Cc: Peter Xu <peterx@redhat.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Shaohua Li <shli@fb.com> Cc: Stephen Smalley <stephen.smalley.work@gmail.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:13:49 +03:00
if ((vmf->flags & FAULT_FLAG_USER) == 0 &&
ctx->flags & UFFD_USER_MODE_ONLY) {
printk_once(KERN_WARNING "uffd: Set unprivileged_userfaultfd "
"sysctl knob to 1 if kernel faults must be handled "
"without obtaining CAP_SYS_PTRACE capability\n");
goto out;
}
mm: userfaultfd: add feature to request for a signal delivery In some cases, userfaultfd mechanism should just deliver a SIGBUS signal to the faulting process, instead of the page-fault event. Dealing with page-fault event using a monitor thread can be an overhead in these cases. For example applications like the database could use the signaling mechanism for robustness purpose. Database uses hugetlbfs for performance reason. Files on hugetlbfs filesystem are created and huge pages allocated using fallocate() API. Pages are deallocated/freed using fallocate() hole punching support. These files are mmapped and accessed by many processes as shared memory. The database keeps track of which offsets in the hugetlbfs file have pages allocated. Any access to mapped address over holes in the file, which can occur due to bugs in the application, is considered invalid and expect the process to simply receive a SIGBUS. However, currently when a hole in the file is accessed via the mapped address, kernel/mm attempts to automatically allocate a page at page fault time, resulting in implicitly filling the hole in the file. This may not be the desired behavior for applications like the database that want to explicitly manage page allocations of hugetlbfs files. Using userfaultfd mechanism with this support to get a signal, database application can prevent pages from being allocated implicitly when processes access mapped address over holes in the file. This patch adds UFFD_FEATURE_SIGBUS feature to userfaultfd mechnism to request for a SIGBUS signal. See following for previous discussion about the database requirement leading to this proposal as suggested by Andrea. http://www.spinics.net/lists/linux-mm/msg129224.html Link: http://lkml.kernel.org/r/1501552446-748335-2-git-send-email-prakash.sangappa@oracle.com Signed-off-by: Prakash Sangappa <prakash.sangappa@oracle.com> Reviewed-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Shuah Khan <shuah@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-09-07 02:23:39 +03:00
/*
* If it's already released don't get it. This avoids to loop
* in __get_user_pages if userfaultfd_release waits on the
* caller of handle_userfault to release the mmap_lock.
*/
locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-24 00:07:29 +03:00
if (unlikely(READ_ONCE(ctx->released))) {
/*
* Don't return VM_FAULT_SIGBUS in this case, so a non
* cooperative manager can close the uffd after the
* last UFFDIO_COPY, without risking to trigger an
* involuntary SIGBUS if the process was starting the
* userfaultfd while the userfaultfd was still armed
* (but after the last UFFDIO_COPY). If the uffd
* wasn't already closed when the userfault reached
* this point, that would normally be solved by
* userfaultfd_must_wait returning 'false'.
*
* If we were to return VM_FAULT_SIGBUS here, the non
* cooperative manager would be instead forced to
* always call UFFDIO_UNREGISTER before it can safely
* close the uffd.
*/
ret = VM_FAULT_NOPAGE;
userfaultfd: wake pending userfaults This is an optimization but it's a userland visible one and it affects the API. The downside of this optimization is that if you call poll() and you get POLLIN, read(ufd) may still return -EAGAIN. The blocked userfault may be waken by a different thread, before read(ufd) comes around. This in short means that poll() isn't really usable if the userfaultfd is opened in blocking mode. userfaults won't wait in "pending" state to be read anymore and any UFFDIO_WAKE or similar operations that has the objective of waking userfaults after their resolution, will wake all blocked userfaults for the resolved range, including those that haven't been read() by userland yet. The behavior of poll() becomes not standard, but this obviates the need of "spurious" UFFDIO_WAKE and it lets the userland threads to restart immediately without requiring an UFFDIO_WAKE. This is even more significant in case of repeated faults on the same address from multiple threads. This optimization is justified by the measurement that the number of spurious UFFDIO_WAKE accounts for 5% and 10% of the total userfaults for heavy workloads, so it's worth optimizing those away. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:41 +03:00
goto out;
}
/*
* Check that we can return VM_FAULT_RETRY.
*
* NOTE: it should become possible to return VM_FAULT_RETRY
* even if FAULT_FLAG_TRIED is set without leading to gup()
* -EBUSY failures, if the userfaultfd is to be extended for
* VM_UFFD_WP tracking and we intend to arm the userfault
* without first stopping userland access to the memory. For
* VM_UFFD_MISSING userfaults this is enough for now.
*/
if (unlikely(!(vmf->flags & FAULT_FLAG_ALLOW_RETRY))) {
/*
* Validate the invariant that nowait must allow retry
* to be sure not to return SIGBUS erroneously on
* nowait invocations.
*/
BUG_ON(vmf->flags & FAULT_FLAG_RETRY_NOWAIT);
#ifdef CONFIG_DEBUG_VM
if (printk_ratelimit()) {
printk(KERN_WARNING
"FAULT_FLAG_ALLOW_RETRY missing %x\n",
vmf->flags);
dump_stack();
}
#endif
userfaultfd: wake pending userfaults This is an optimization but it's a userland visible one and it affects the API. The downside of this optimization is that if you call poll() and you get POLLIN, read(ufd) may still return -EAGAIN. The blocked userfault may be waken by a different thread, before read(ufd) comes around. This in short means that poll() isn't really usable if the userfaultfd is opened in blocking mode. userfaults won't wait in "pending" state to be read anymore and any UFFDIO_WAKE or similar operations that has the objective of waking userfaults after their resolution, will wake all blocked userfaults for the resolved range, including those that haven't been read() by userland yet. The behavior of poll() becomes not standard, but this obviates the need of "spurious" UFFDIO_WAKE and it lets the userland threads to restart immediately without requiring an UFFDIO_WAKE. This is even more significant in case of repeated faults on the same address from multiple threads. This optimization is justified by the measurement that the number of spurious UFFDIO_WAKE accounts for 5% and 10% of the total userfaults for heavy workloads, so it's worth optimizing those away. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:41 +03:00
goto out;
}
/*
* Handle nowait, not much to do other than tell it to retry
* and wait.
*/
userfaultfd: wake pending userfaults This is an optimization but it's a userland visible one and it affects the API. The downside of this optimization is that if you call poll() and you get POLLIN, read(ufd) may still return -EAGAIN. The blocked userfault may be waken by a different thread, before read(ufd) comes around. This in short means that poll() isn't really usable if the userfaultfd is opened in blocking mode. userfaults won't wait in "pending" state to be read anymore and any UFFDIO_WAKE or similar operations that has the objective of waking userfaults after their resolution, will wake all blocked userfaults for the resolved range, including those that haven't been read() by userland yet. The behavior of poll() becomes not standard, but this obviates the need of "spurious" UFFDIO_WAKE and it lets the userland threads to restart immediately without requiring an UFFDIO_WAKE. This is even more significant in case of repeated faults on the same address from multiple threads. This optimization is justified by the measurement that the number of spurious UFFDIO_WAKE accounts for 5% and 10% of the total userfaults for heavy workloads, so it's worth optimizing those away. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:41 +03:00
ret = VM_FAULT_RETRY;
if (vmf->flags & FAULT_FLAG_RETRY_NOWAIT)
userfaultfd: wake pending userfaults This is an optimization but it's a userland visible one and it affects the API. The downside of this optimization is that if you call poll() and you get POLLIN, read(ufd) may still return -EAGAIN. The blocked userfault may be waken by a different thread, before read(ufd) comes around. This in short means that poll() isn't really usable if the userfaultfd is opened in blocking mode. userfaults won't wait in "pending" state to be read anymore and any UFFDIO_WAKE or similar operations that has the objective of waking userfaults after their resolution, will wake all blocked userfaults for the resolved range, including those that haven't been read() by userland yet. The behavior of poll() becomes not standard, but this obviates the need of "spurious" UFFDIO_WAKE and it lets the userland threads to restart immediately without requiring an UFFDIO_WAKE. This is even more significant in case of repeated faults on the same address from multiple threads. This optimization is justified by the measurement that the number of spurious UFFDIO_WAKE accounts for 5% and 10% of the total userfaults for heavy workloads, so it's worth optimizing those away. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:41 +03:00
goto out;
/* take the reference before dropping the mmap_lock */
userfaultfd_ctx_get(ctx);
init_waitqueue_func_entry(&uwq.wq, userfaultfd_wake_function);
uwq.wq.private = current;
2022-07-11 19:59:06 +03:00
uwq.msg = userfault_msg(vmf->address, vmf->real_address, vmf->flags,
reason, ctx->features);
uwq.ctx = ctx;
userfaultfd: fix SIGBUS resulting from false rwsem wakeups With >=32 CPUs the userfaultfd selftest triggered a graceful but unexpected SIGBUS because VM_FAULT_RETRY was returned by handle_userfault() despite the UFFDIO_COPY wasn't completed. This seems caused by rwsem waking the thread blocked in handle_userfault() and we can't run up_read() before the wait_event sequence is complete. Keeping the wait_even sequence identical to the first one, would require running userfaultfd_must_wait() again to know if the loop should be repeated, and it would also require retaking the rwsem and revalidating the whole vma status. It seems simpler to wait the targeted wakeup so that if false wakeups materialize we still wait for our specific wakeup event, unless of course there are signals or the uffd was released. Debug code collecting the stack trace of the wakeup showed this: $ ./userfaultfd 100 99999 nr_pages: 25600, nr_pages_per_cpu: 800 bounces: 99998, mode: racing ver poll, userfaults: 32 35 90 232 30 138 69 82 34 30 139 40 40 31 20 19 43 13 15 28 27 38 21 43 56 22 1 17 31 8 4 2 bounces: 99997, mode: rnd ver poll, Bus error (core dumped) save_stack_trace+0x2b/0x50 try_to_wake_up+0x2a6/0x580 wake_up_q+0x32/0x70 rwsem_wake+0xe0/0x120 call_rwsem_wake+0x1b/0x30 up_write+0x3b/0x40 vm_mmap_pgoff+0x9c/0xc0 SyS_mmap_pgoff+0x1a9/0x240 SyS_mmap+0x22/0x30 entry_SYSCALL_64_fastpath+0x1f/0xbd 0xffffffffffffffff FAULT_FLAG_ALLOW_RETRY missing 70 CPU: 24 PID: 1054 Comm: userfaultfd Tainted: G W 4.8.0+ #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xb8/0x112 handle_userfault+0x572/0x650 handle_mm_fault+0x12cb/0x1520 __do_page_fault+0x175/0x500 trace_do_page_fault+0x61/0x270 do_async_page_fault+0x19/0x90 async_page_fault+0x25/0x30 This always happens when the main userfault selftest thread is running clone() while glibc runs either mprotect or mmap (both taking mmap_sem down_write()) to allocate the thread stack of the background threads, while locking/userfault threads already run at full throttle and are susceptible to false wakeups that may cause handle_userfault() to return before than expected (which results in graceful SIGBUS at the next attempt). This was reproduced only with >=32 CPUs because the loop to start the thread where clone() is too quick with fewer CPUs, while with 32 CPUs there's already significant activity on ~32 locking and userfault threads when the last background threads are started with clone(). This >=32 CPUs SMP race condition is likely reproducible only with the selftest because of the much heavier userfault load it generates if compared to real apps. We'll have to allow "one more" VM_FAULT_RETRY for the WP support and a patch floating around that provides it also hidden this problem but in reality only is successfully at hiding the problem. False wakeups could still happen again the second time handle_userfault() is invoked, even if it's a so rare race condition that getting false wakeups twice in a row is impossible to reproduce. This full fix is needed for correctness, the only alternative would be to allow VM_FAULT_RETRY to be returned infinitely. With this fix the WP support can stick to a strict "one more" VM_FAULT_RETRY logic (no need of returning it infinite times to avoid the SIGBUS). Link: http://lkml.kernel.org/r/20170111005535.13832-2-aarcange@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reported-by: Shubham Kumar Sharma <shubham.kumar.sharma@oracle.com> Tested-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Michael Rapoport <RAPOPORT@il.ibm.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-25 02:17:59 +03:00
uwq.waken = false;
mm/userfaultfd: honor FAULT_FLAG_KILLABLE in fault path Userfaultfd fault path was by default killable even if the caller does not have FAULT_FLAG_KILLABLE. That makes sense before in that when with gup we don't have FAULT_FLAG_KILLABLE properly set before. Now after previous patch we've got FAULT_FLAG_KILLABLE applied even for gup code so it should also make sense to let userfaultfd to honor the FAULT_FLAG_KILLABLE. Because we're unconditionally setting FAULT_FLAG_KILLABLE in gup code right now, this patch should have no functional change. It also cleaned the code a little bit by introducing some helpers. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Brian Geffon <bgeffon@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Matthew Wilcox <willy@infradead.org> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Link: http://lkml.kernel.org/r/20200220160300.9941-1-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-02 07:09:00 +03:00
blocking_state = userfaultfd_get_blocking_state(vmf->flags);
fs/userfaultfd.c: disable irqs for fault_pending and event locks When IOCB_CMD_POLL is used on a userfaultfd, aio_poll() disables IRQs and takes kioctx::ctx_lock, then userfaultfd_ctx::fd_wqh.lock. This may have to wait for userfaultfd_ctx::fd_wqh.lock to be released by userfaultfd_ctx_read(), which in turn can be waiting for userfaultfd_ctx::fault_pending_wqh.lock or userfaultfd_ctx::event_wqh.lock. But elsewhere the fault_pending_wqh and event_wqh locks are taken with IRQs enabled. Since the IRQ handler may take kioctx::ctx_lock, lockdep reports that a deadlock is possible. Fix it by always disabling IRQs when taking the fault_pending_wqh and event_wqh locks. Commit ae62c16e105a ("userfaultfd: disable irqs when taking the waitqueue lock") didn't fix this because it only accounted for the fd_wqh lock, not the other locks nested inside it. Link: http://lkml.kernel.org/r/20190627075004.21259-1-ebiggers@kernel.org Fixes: bfe4037e722e ("aio: implement IOCB_CMD_POLL") Signed-off-by: Eric Biggers <ebiggers@google.com> Reported-by: syzbot+fab6de82892b6b9c6191@syzkaller.appspotmail.com Reported-by: syzbot+53c0b767f7ca0dc0c451@syzkaller.appspotmail.com Reported-by: syzbot+a3accb352f9c22041cfa@syzkaller.appspotmail.com Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> [4.19+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-05 01:14:39 +03:00
spin_lock_irq(&ctx->fault_pending_wqh.lock);
/*
* After the __add_wait_queue the uwq is visible to userland
* through poll/read().
*/
__add_wait_queue(&ctx->fault_pending_wqh, &uwq.wq);
/*
* The smp_mb() after __set_current_state prevents the reads
* following the spin_unlock to happen before the list_add in
* __add_wait_queue.
*/
userfaultfd: fix SIGBUS resulting from false rwsem wakeups With >=32 CPUs the userfaultfd selftest triggered a graceful but unexpected SIGBUS because VM_FAULT_RETRY was returned by handle_userfault() despite the UFFDIO_COPY wasn't completed. This seems caused by rwsem waking the thread blocked in handle_userfault() and we can't run up_read() before the wait_event sequence is complete. Keeping the wait_even sequence identical to the first one, would require running userfaultfd_must_wait() again to know if the loop should be repeated, and it would also require retaking the rwsem and revalidating the whole vma status. It seems simpler to wait the targeted wakeup so that if false wakeups materialize we still wait for our specific wakeup event, unless of course there are signals or the uffd was released. Debug code collecting the stack trace of the wakeup showed this: $ ./userfaultfd 100 99999 nr_pages: 25600, nr_pages_per_cpu: 800 bounces: 99998, mode: racing ver poll, userfaults: 32 35 90 232 30 138 69 82 34 30 139 40 40 31 20 19 43 13 15 28 27 38 21 43 56 22 1 17 31 8 4 2 bounces: 99997, mode: rnd ver poll, Bus error (core dumped) save_stack_trace+0x2b/0x50 try_to_wake_up+0x2a6/0x580 wake_up_q+0x32/0x70 rwsem_wake+0xe0/0x120 call_rwsem_wake+0x1b/0x30 up_write+0x3b/0x40 vm_mmap_pgoff+0x9c/0xc0 SyS_mmap_pgoff+0x1a9/0x240 SyS_mmap+0x22/0x30 entry_SYSCALL_64_fastpath+0x1f/0xbd 0xffffffffffffffff FAULT_FLAG_ALLOW_RETRY missing 70 CPU: 24 PID: 1054 Comm: userfaultfd Tainted: G W 4.8.0+ #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xb8/0x112 handle_userfault+0x572/0x650 handle_mm_fault+0x12cb/0x1520 __do_page_fault+0x175/0x500 trace_do_page_fault+0x61/0x270 do_async_page_fault+0x19/0x90 async_page_fault+0x25/0x30 This always happens when the main userfault selftest thread is running clone() while glibc runs either mprotect or mmap (both taking mmap_sem down_write()) to allocate the thread stack of the background threads, while locking/userfault threads already run at full throttle and are susceptible to false wakeups that may cause handle_userfault() to return before than expected (which results in graceful SIGBUS at the next attempt). This was reproduced only with >=32 CPUs because the loop to start the thread where clone() is too quick with fewer CPUs, while with 32 CPUs there's already significant activity on ~32 locking and userfault threads when the last background threads are started with clone(). This >=32 CPUs SMP race condition is likely reproducible only with the selftest because of the much heavier userfault load it generates if compared to real apps. We'll have to allow "one more" VM_FAULT_RETRY for the WP support and a patch floating around that provides it also hidden this problem but in reality only is successfully at hiding the problem. False wakeups could still happen again the second time handle_userfault() is invoked, even if it's a so rare race condition that getting false wakeups twice in a row is impossible to reproduce. This full fix is needed for correctness, the only alternative would be to allow VM_FAULT_RETRY to be returned infinitely. With this fix the WP support can stick to a strict "one more" VM_FAULT_RETRY logic (no need of returning it infinite times to avoid the SIGBUS). Link: http://lkml.kernel.org/r/20170111005535.13832-2-aarcange@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reported-by: Shubham Kumar Sharma <shubham.kumar.sharma@oracle.com> Tested-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Michael Rapoport <RAPOPORT@il.ibm.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-01-25 02:17:59 +03:00
set_current_state(blocking_state);
fs/userfaultfd.c: disable irqs for fault_pending and event locks When IOCB_CMD_POLL is used on a userfaultfd, aio_poll() disables IRQs and takes kioctx::ctx_lock, then userfaultfd_ctx::fd_wqh.lock. This may have to wait for userfaultfd_ctx::fd_wqh.lock to be released by userfaultfd_ctx_read(), which in turn can be waiting for userfaultfd_ctx::fault_pending_wqh.lock or userfaultfd_ctx::event_wqh.lock. But elsewhere the fault_pending_wqh and event_wqh locks are taken with IRQs enabled. Since the IRQ handler may take kioctx::ctx_lock, lockdep reports that a deadlock is possible. Fix it by always disabling IRQs when taking the fault_pending_wqh and event_wqh locks. Commit ae62c16e105a ("userfaultfd: disable irqs when taking the waitqueue lock") didn't fix this because it only accounted for the fd_wqh lock, not the other locks nested inside it. Link: http://lkml.kernel.org/r/20190627075004.21259-1-ebiggers@kernel.org Fixes: bfe4037e722e ("aio: implement IOCB_CMD_POLL") Signed-off-by: Eric Biggers <ebiggers@google.com> Reported-by: syzbot+fab6de82892b6b9c6191@syzkaller.appspotmail.com Reported-by: syzbot+53c0b767f7ca0dc0c451@syzkaller.appspotmail.com Reported-by: syzbot+a3accb352f9c22041cfa@syzkaller.appspotmail.com Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> [4.19+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-05 01:14:39 +03:00
spin_unlock_irq(&ctx->fault_pending_wqh.lock);
if (!is_vm_hugetlb_page(vmf->vma))
must_wait = userfaultfd_must_wait(ctx, vmf->address, vmf->flags,
reason);
else
mm/hugetlb: add size parameter to huge_pte_offset() A poisoned or migrated hugepage is stored as a swap entry in the page tables. On architectures that support hugepages consisting of contiguous page table entries (such as on arm64) this leads to ambiguity in determining the page table entry to return in huge_pte_offset() when a poisoned entry is encountered. Let's remove the ambiguity by adding a size parameter to convey additional information about the requested address. Also fixup the definition/usage of huge_pte_offset() throughout the tree. Link: http://lkml.kernel.org/r/20170522133604.11392-4-punit.agrawal@arm.com Signed-off-by: Punit Agrawal <punit.agrawal@arm.com> Acked-by: Steve Capper <steve.capper@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> (odd fixer:METAG ARCHITECTURE) Cc: Ralf Baechle <ralf@linux-mips.org> (supporter:MIPS) Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-07-07 01:39:42 +03:00
must_wait = userfaultfd_huge_must_wait(ctx, vmf->vma,
vmf->address,
vmf->flags, reason);
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 07:33:25 +03:00
mmap_read_unlock(mm);
userfaultfd: solve the race between UFFDIO_COPY|ZEROPAGE and read Solve in-kernel the race between UFFDIO_COPY|ZEROPAGE and userfaultfd_read if they are run on different threads simultaneously. Until now qemu solved the race in userland: the race was explicitly and intentionally left for userland to solve. However we can also solve it in kernel. Requiring all users to solve this race if they use two threads (one for the background transfer and one for the userfault reads) isn't very attractive from an API prospective, furthermore this allows to remove a whole bunch of mutex and bitmap code from qemu, making it faster. The cost of __get_user_pages_fast should be insignificant considering it scales perfectly and the pagetables are already hot in the CPU cache, compared to the overhead in userland to maintain those structures. Applying this patch is backwards compatible with respect to the userfaultfd userland API, however reverting this change wouldn't be backwards compatible anymore. Without this patch qemu in the background transfer thread, has to read the old state, and do UFFDIO_WAKE if old_state is missing but it become REQUESTED by the time it tries to set it to RECEIVED (signaling the other side received an userfault). vcpu background_thr userfault_thr ----- ----- ----- vcpu0 handle_mm_fault() postcopy_place_page read old_state -> MISSING UFFDIO_COPY 0x7fb76a139000 (no wakeup, still pending) vcpu0 fault at 0x7fb76a139000 enters handle_userfault poll() is kicked poll() -> POLLIN read() -> 0x7fb76a139000 postcopy_pmi_change_state(MISSING, REQUESTED) -> REQUESTED tmp_state = postcopy_pmi_change_state(old_state, RECEIVED) -> REQUESTED /* check that no userfault raced with UFFDIO_COPY */ if (old_state == MISSING && tmp_state == REQUESTED) UFFDIO_WAKE from background thread And a second case where a UFFDIO_WAKE would be needed is in the userfault thread: vcpu background_thr userfault_thr ----- ----- ----- vcpu0 handle_mm_fault() postcopy_place_page read old_state -> MISSING UFFDIO_COPY 0x7fb76a139000 (no wakeup, still pending) tmp_state = postcopy_pmi_change_state(old_state, RECEIVED) -> RECEIVED vcpu0 fault at 0x7fb76a139000 enters handle_userfault poll() is kicked poll() -> POLLIN read() -> 0x7fb76a139000 if (postcopy_pmi_change_state(MISSING, REQUESTED) == RECEIVED) UFFDIO_WAKE from userfault thread This patch removes the need of both UFFDIO_WAKE and of the associated per-page tristate as well. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:51 +03:00
if (likely(must_wait && !READ_ONCE(ctx->released))) {
wake_up_poll(&ctx->fd_wqh, EPOLLIN);
schedule();
userfaultfd: wake pending userfaults This is an optimization but it's a userland visible one and it affects the API. The downside of this optimization is that if you call poll() and you get POLLIN, read(ufd) may still return -EAGAIN. The blocked userfault may be waken by a different thread, before read(ufd) comes around. This in short means that poll() isn't really usable if the userfaultfd is opened in blocking mode. userfaults won't wait in "pending" state to be read anymore and any UFFDIO_WAKE or similar operations that has the objective of waking userfaults after their resolution, will wake all blocked userfaults for the resolved range, including those that haven't been read() by userland yet. The behavior of poll() becomes not standard, but this obviates the need of "spurious" UFFDIO_WAKE and it lets the userland threads to restart immediately without requiring an UFFDIO_WAKE. This is even more significant in case of repeated faults on the same address from multiple threads. This optimization is justified by the measurement that the number of spurious UFFDIO_WAKE accounts for 5% and 10% of the total userfaults for heavy workloads, so it's worth optimizing those away. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:41 +03:00
}
userfaultfd: wake pending userfaults This is an optimization but it's a userland visible one and it affects the API. The downside of this optimization is that if you call poll() and you get POLLIN, read(ufd) may still return -EAGAIN. The blocked userfault may be waken by a different thread, before read(ufd) comes around. This in short means that poll() isn't really usable if the userfaultfd is opened in blocking mode. userfaults won't wait in "pending" state to be read anymore and any UFFDIO_WAKE or similar operations that has the objective of waking userfaults after their resolution, will wake all blocked userfaults for the resolved range, including those that haven't been read() by userland yet. The behavior of poll() becomes not standard, but this obviates the need of "spurious" UFFDIO_WAKE and it lets the userland threads to restart immediately without requiring an UFFDIO_WAKE. This is even more significant in case of repeated faults on the same address from multiple threads. This optimization is justified by the measurement that the number of spurious UFFDIO_WAKE accounts for 5% and 10% of the total userfaults for heavy workloads, so it's worth optimizing those away. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:41 +03:00
__set_current_state(TASK_RUNNING);
/*
* Here we race with the list_del; list_add in
* userfaultfd_ctx_read(), however because we don't ever run
* list_del_init() to refile across the two lists, the prev
* and next pointers will never point to self. list_add also
* would never let any of the two pointers to point to
* self. So list_empty_careful won't risk to see both pointers
* pointing to self at any time during the list refile. The
* only case where list_del_init() is called is the full
* removal in the wake function and there we don't re-list_add
* and it's fine not to block on the spinlock. The uwq on this
* kernel stack can be released after the list_del_init.
*/
sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list naming So I've noticed a number of instances where it was not obvious from the code whether ->task_list was for a wait-queue head or a wait-queue entry. Furthermore, there's a number of wait-queue users where the lists are not for 'tasks' but other entities (poll tables, etc.), in which case the 'task_list' name is actively confusing. To clear this all up, name the wait-queue head and entry list structure fields unambiguously: struct wait_queue_head::task_list => ::head struct wait_queue_entry::task_list => ::entry For example, this code: rqw->wait.task_list.next != &wait->task_list ... is was pretty unclear (to me) what it's doing, while now it's written this way: rqw->wait.head.next != &wait->entry ... which makes it pretty clear that we are iterating a list until we see the head. Other examples are: list_for_each_entry_safe(pos, next, &x->task_list, task_list) { list_for_each_entry(wq, &fence->wait.task_list, task_list) { ... where it's unclear (to me) what we are iterating, and during review it's hard to tell whether it's trying to walk a wait-queue entry (which would be a bug), while now it's written as: list_for_each_entry_safe(pos, next, &x->head, entry) { list_for_each_entry(wq, &fence->wait.head, entry) { Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20 13:06:46 +03:00
if (!list_empty_careful(&uwq.wq.entry)) {
fs/userfaultfd.c: disable irqs for fault_pending and event locks When IOCB_CMD_POLL is used on a userfaultfd, aio_poll() disables IRQs and takes kioctx::ctx_lock, then userfaultfd_ctx::fd_wqh.lock. This may have to wait for userfaultfd_ctx::fd_wqh.lock to be released by userfaultfd_ctx_read(), which in turn can be waiting for userfaultfd_ctx::fault_pending_wqh.lock or userfaultfd_ctx::event_wqh.lock. But elsewhere the fault_pending_wqh and event_wqh locks are taken with IRQs enabled. Since the IRQ handler may take kioctx::ctx_lock, lockdep reports that a deadlock is possible. Fix it by always disabling IRQs when taking the fault_pending_wqh and event_wqh locks. Commit ae62c16e105a ("userfaultfd: disable irqs when taking the waitqueue lock") didn't fix this because it only accounted for the fd_wqh lock, not the other locks nested inside it. Link: http://lkml.kernel.org/r/20190627075004.21259-1-ebiggers@kernel.org Fixes: bfe4037e722e ("aio: implement IOCB_CMD_POLL") Signed-off-by: Eric Biggers <ebiggers@google.com> Reported-by: syzbot+fab6de82892b6b9c6191@syzkaller.appspotmail.com Reported-by: syzbot+53c0b767f7ca0dc0c451@syzkaller.appspotmail.com Reported-by: syzbot+a3accb352f9c22041cfa@syzkaller.appspotmail.com Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> [4.19+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-05 01:14:39 +03:00
spin_lock_irq(&ctx->fault_pending_wqh.lock);
/*
* No need of list_del_init(), the uwq on the stack
* will be freed shortly anyway.
*/
sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list naming So I've noticed a number of instances where it was not obvious from the code whether ->task_list was for a wait-queue head or a wait-queue entry. Furthermore, there's a number of wait-queue users where the lists are not for 'tasks' but other entities (poll tables, etc.), in which case the 'task_list' name is actively confusing. To clear this all up, name the wait-queue head and entry list structure fields unambiguously: struct wait_queue_head::task_list => ::head struct wait_queue_entry::task_list => ::entry For example, this code: rqw->wait.task_list.next != &wait->task_list ... is was pretty unclear (to me) what it's doing, while now it's written this way: rqw->wait.head.next != &wait->entry ... which makes it pretty clear that we are iterating a list until we see the head. Other examples are: list_for_each_entry_safe(pos, next, &x->task_list, task_list) { list_for_each_entry(wq, &fence->wait.task_list, task_list) { ... where it's unclear (to me) what we are iterating, and during review it's hard to tell whether it's trying to walk a wait-queue entry (which would be a bug), while now it's written as: list_for_each_entry_safe(pos, next, &x->head, entry) { list_for_each_entry(wq, &fence->wait.head, entry) { Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20 13:06:46 +03:00
list_del(&uwq.wq.entry);
fs/userfaultfd.c: disable irqs for fault_pending and event locks When IOCB_CMD_POLL is used on a userfaultfd, aio_poll() disables IRQs and takes kioctx::ctx_lock, then userfaultfd_ctx::fd_wqh.lock. This may have to wait for userfaultfd_ctx::fd_wqh.lock to be released by userfaultfd_ctx_read(), which in turn can be waiting for userfaultfd_ctx::fault_pending_wqh.lock or userfaultfd_ctx::event_wqh.lock. But elsewhere the fault_pending_wqh and event_wqh locks are taken with IRQs enabled. Since the IRQ handler may take kioctx::ctx_lock, lockdep reports that a deadlock is possible. Fix it by always disabling IRQs when taking the fault_pending_wqh and event_wqh locks. Commit ae62c16e105a ("userfaultfd: disable irqs when taking the waitqueue lock") didn't fix this because it only accounted for the fd_wqh lock, not the other locks nested inside it. Link: http://lkml.kernel.org/r/20190627075004.21259-1-ebiggers@kernel.org Fixes: bfe4037e722e ("aio: implement IOCB_CMD_POLL") Signed-off-by: Eric Biggers <ebiggers@google.com> Reported-by: syzbot+fab6de82892b6b9c6191@syzkaller.appspotmail.com Reported-by: syzbot+53c0b767f7ca0dc0c451@syzkaller.appspotmail.com Reported-by: syzbot+a3accb352f9c22041cfa@syzkaller.appspotmail.com Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> [4.19+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-05 01:14:39 +03:00
spin_unlock_irq(&ctx->fault_pending_wqh.lock);
}
/*
* ctx may go away after this if the userfault pseudo fd is
* already released.
*/
userfaultfd_ctx_put(ctx);
userfaultfd: wake pending userfaults This is an optimization but it's a userland visible one and it affects the API. The downside of this optimization is that if you call poll() and you get POLLIN, read(ufd) may still return -EAGAIN. The blocked userfault may be waken by a different thread, before read(ufd) comes around. This in short means that poll() isn't really usable if the userfaultfd is opened in blocking mode. userfaults won't wait in "pending" state to be read anymore and any UFFDIO_WAKE or similar operations that has the objective of waking userfaults after their resolution, will wake all blocked userfaults for the resolved range, including those that haven't been read() by userland yet. The behavior of poll() becomes not standard, but this obviates the need of "spurious" UFFDIO_WAKE and it lets the userland threads to restart immediately without requiring an UFFDIO_WAKE. This is even more significant in case of repeated faults on the same address from multiple threads. This optimization is justified by the measurement that the number of spurious UFFDIO_WAKE accounts for 5% and 10% of the total userfaults for heavy workloads, so it's worth optimizing those away. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:41 +03:00
out:
return ret;
}
static void userfaultfd_event_wait_completion(struct userfaultfd_ctx *ctx,
struct userfaultfd_wait_queue *ewq)
{
struct userfaultfd_ctx *release_new_ctx;
if (WARN_ON_ONCE(current->flags & PF_EXITING))
goto out;
ewq->ctx = ctx;
init_waitqueue_entry(&ewq->wq, current);
release_new_ctx = NULL;
fs/userfaultfd.c: disable irqs for fault_pending and event locks When IOCB_CMD_POLL is used on a userfaultfd, aio_poll() disables IRQs and takes kioctx::ctx_lock, then userfaultfd_ctx::fd_wqh.lock. This may have to wait for userfaultfd_ctx::fd_wqh.lock to be released by userfaultfd_ctx_read(), which in turn can be waiting for userfaultfd_ctx::fault_pending_wqh.lock or userfaultfd_ctx::event_wqh.lock. But elsewhere the fault_pending_wqh and event_wqh locks are taken with IRQs enabled. Since the IRQ handler may take kioctx::ctx_lock, lockdep reports that a deadlock is possible. Fix it by always disabling IRQs when taking the fault_pending_wqh and event_wqh locks. Commit ae62c16e105a ("userfaultfd: disable irqs when taking the waitqueue lock") didn't fix this because it only accounted for the fd_wqh lock, not the other locks nested inside it. Link: http://lkml.kernel.org/r/20190627075004.21259-1-ebiggers@kernel.org Fixes: bfe4037e722e ("aio: implement IOCB_CMD_POLL") Signed-off-by: Eric Biggers <ebiggers@google.com> Reported-by: syzbot+fab6de82892b6b9c6191@syzkaller.appspotmail.com Reported-by: syzbot+53c0b767f7ca0dc0c451@syzkaller.appspotmail.com Reported-by: syzbot+a3accb352f9c22041cfa@syzkaller.appspotmail.com Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> [4.19+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-05 01:14:39 +03:00
spin_lock_irq(&ctx->event_wqh.lock);
/*
* After the __add_wait_queue the uwq is visible to userland
* through poll/read().
*/
__add_wait_queue(&ctx->event_wqh, &ewq->wq);
for (;;) {
set_current_state(TASK_KILLABLE);
if (ewq->msg.event == 0)
break;
locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-24 00:07:29 +03:00
if (READ_ONCE(ctx->released) ||
fatal_signal_pending(current)) {
userfaultfd: non-cooperative: fix fork use after free When reading the event from the uffd, we put it on a temporary fork_event list to detect if we can still access it after releasing and retaking the event_wqh.lock. If fork aborts and removes the event from the fork_event all is fine as long as we're still in the userfault read context and fork_event head is still alive. We've to put the event allocated in the fork kernel stack, back from fork_event list-head to the event_wqh head, before returning from userfaultfd_ctx_read, because the fork_event head lifetime is limited to the userfaultfd_ctx_read stack lifetime. Forgetting to move the event back to its event_wqh place then results in __remove_wait_queue(&ctx->event_wqh, &ewq->wq); in userfaultfd_event_wait_completion to remove it from a head that has been already freed from the reader stack. This could only happen if resolve_userfault_fork failed (for example if there are no file descriptors available to allocate the fork uffd). If it succeeded it was put back correctly. Furthermore, after find_userfault_evt receives a fork event, the forked userfault context in fork_nctx and uwq->msg.arg.reserved.reserved1 can be released by the fork thread as soon as the event_wqh.lock is released. Taking a reference on the fork_nctx before dropping the lock prevents an use after free in resolve_userfault_fork(). If the fork side aborted and it already released everything, we still try to succeed resolve_userfault_fork(), if possible. Fixes: 893e26e61d04eac9 ("userfaultfd: non-cooperative: Add fork() event") Link: http://lkml.kernel.org/r/20170920180413.26713-1-aarcange@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reported-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-04 02:15:38 +03:00
/*
* &ewq->wq may be queued in fork_event, but
* __remove_wait_queue ignores the head
* parameter. It would be a problem if it
* didn't.
*/
__remove_wait_queue(&ctx->event_wqh, &ewq->wq);
if (ewq->msg.event == UFFD_EVENT_FORK) {
struct userfaultfd_ctx *new;
new = (struct userfaultfd_ctx *)
(unsigned long)
ewq->msg.arg.reserved.reserved1;
release_new_ctx = new;
}
break;
}
fs/userfaultfd.c: disable irqs for fault_pending and event locks When IOCB_CMD_POLL is used on a userfaultfd, aio_poll() disables IRQs and takes kioctx::ctx_lock, then userfaultfd_ctx::fd_wqh.lock. This may have to wait for userfaultfd_ctx::fd_wqh.lock to be released by userfaultfd_ctx_read(), which in turn can be waiting for userfaultfd_ctx::fault_pending_wqh.lock or userfaultfd_ctx::event_wqh.lock. But elsewhere the fault_pending_wqh and event_wqh locks are taken with IRQs enabled. Since the IRQ handler may take kioctx::ctx_lock, lockdep reports that a deadlock is possible. Fix it by always disabling IRQs when taking the fault_pending_wqh and event_wqh locks. Commit ae62c16e105a ("userfaultfd: disable irqs when taking the waitqueue lock") didn't fix this because it only accounted for the fd_wqh lock, not the other locks nested inside it. Link: http://lkml.kernel.org/r/20190627075004.21259-1-ebiggers@kernel.org Fixes: bfe4037e722e ("aio: implement IOCB_CMD_POLL") Signed-off-by: Eric Biggers <ebiggers@google.com> Reported-by: syzbot+fab6de82892b6b9c6191@syzkaller.appspotmail.com Reported-by: syzbot+53c0b767f7ca0dc0c451@syzkaller.appspotmail.com Reported-by: syzbot+a3accb352f9c22041cfa@syzkaller.appspotmail.com Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> [4.19+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-05 01:14:39 +03:00
spin_unlock_irq(&ctx->event_wqh.lock);
wake_up_poll(&ctx->fd_wqh, EPOLLIN);
schedule();
fs/userfaultfd.c: disable irqs for fault_pending and event locks When IOCB_CMD_POLL is used on a userfaultfd, aio_poll() disables IRQs and takes kioctx::ctx_lock, then userfaultfd_ctx::fd_wqh.lock. This may have to wait for userfaultfd_ctx::fd_wqh.lock to be released by userfaultfd_ctx_read(), which in turn can be waiting for userfaultfd_ctx::fault_pending_wqh.lock or userfaultfd_ctx::event_wqh.lock. But elsewhere the fault_pending_wqh and event_wqh locks are taken with IRQs enabled. Since the IRQ handler may take kioctx::ctx_lock, lockdep reports that a deadlock is possible. Fix it by always disabling IRQs when taking the fault_pending_wqh and event_wqh locks. Commit ae62c16e105a ("userfaultfd: disable irqs when taking the waitqueue lock") didn't fix this because it only accounted for the fd_wqh lock, not the other locks nested inside it. Link: http://lkml.kernel.org/r/20190627075004.21259-1-ebiggers@kernel.org Fixes: bfe4037e722e ("aio: implement IOCB_CMD_POLL") Signed-off-by: Eric Biggers <ebiggers@google.com> Reported-by: syzbot+fab6de82892b6b9c6191@syzkaller.appspotmail.com Reported-by: syzbot+53c0b767f7ca0dc0c451@syzkaller.appspotmail.com Reported-by: syzbot+a3accb352f9c22041cfa@syzkaller.appspotmail.com Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> [4.19+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-05 01:14:39 +03:00
spin_lock_irq(&ctx->event_wqh.lock);
}
__set_current_state(TASK_RUNNING);
fs/userfaultfd.c: disable irqs for fault_pending and event locks When IOCB_CMD_POLL is used on a userfaultfd, aio_poll() disables IRQs and takes kioctx::ctx_lock, then userfaultfd_ctx::fd_wqh.lock. This may have to wait for userfaultfd_ctx::fd_wqh.lock to be released by userfaultfd_ctx_read(), which in turn can be waiting for userfaultfd_ctx::fault_pending_wqh.lock or userfaultfd_ctx::event_wqh.lock. But elsewhere the fault_pending_wqh and event_wqh locks are taken with IRQs enabled. Since the IRQ handler may take kioctx::ctx_lock, lockdep reports that a deadlock is possible. Fix it by always disabling IRQs when taking the fault_pending_wqh and event_wqh locks. Commit ae62c16e105a ("userfaultfd: disable irqs when taking the waitqueue lock") didn't fix this because it only accounted for the fd_wqh lock, not the other locks nested inside it. Link: http://lkml.kernel.org/r/20190627075004.21259-1-ebiggers@kernel.org Fixes: bfe4037e722e ("aio: implement IOCB_CMD_POLL") Signed-off-by: Eric Biggers <ebiggers@google.com> Reported-by: syzbot+fab6de82892b6b9c6191@syzkaller.appspotmail.com Reported-by: syzbot+53c0b767f7ca0dc0c451@syzkaller.appspotmail.com Reported-by: syzbot+a3accb352f9c22041cfa@syzkaller.appspotmail.com Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> [4.19+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-05 01:14:39 +03:00
spin_unlock_irq(&ctx->event_wqh.lock);
if (release_new_ctx) {
struct vm_area_struct *vma;
struct mm_struct *mm = release_new_ctx->mm;
/* the various vma->vm_userfaultfd_ctx still points to it */
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 07:33:25 +03:00
mmap_write_lock(mm);
for (vma = mm->mmap; vma; vma = vma->vm_next)
if (vma->vm_userfaultfd_ctx.ctx == release_new_ctx) {
vma->vm_userfaultfd_ctx = NULL_VM_UFFD_CTX;
userfaultfd: add minor fault registration mode Patch series "userfaultfd: add minor fault handling", v9. Overview ======== This series adds a new userfaultfd feature, UFFD_FEATURE_MINOR_HUGETLBFS. When enabled (via the UFFDIO_API ioctl), this feature means that any hugetlbfs VMAs registered with UFFDIO_REGISTER_MODE_MISSING will *also* get events for "minor" faults. By "minor" fault, I mean the following situation: Let there exist two mappings (i.e., VMAs) to the same page(s) (shared memory). One of the mappings is registered with userfaultfd (in minor mode), and the other is not. Via the non-UFFD mapping, the underlying pages have already been allocated & filled with some contents. The UFFD mapping has not yet been faulted in; when it is touched for the first time, this results in what I'm calling a "minor" fault. As a concrete example, when working with hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing page. We also add a new ioctl to resolve such faults: UFFDIO_CONTINUE. The idea is, userspace resolves the fault by either a) doing nothing if the contents are already correct, or b) updating the underlying contents using the second, non-UFFD mapping (via memcpy/memset or similar, or something fancier like RDMA, or etc...). In either case, userspace issues UFFDIO_CONTINUE to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". Use Case ======== Consider the use case of VM live migration (e.g. under QEMU/KVM): 1. While a VM is still running, we copy the contents of its memory to a target machine. The pages are populated on the target by writing to the non-UFFD mapping, using the setup described above. The VM is still running (and therefore its memory is likely changing), so this may be repeated several times, until we decide the target is "up to date enough". 2. We pause the VM on the source, and start executing on the target machine. During this gap, the VM's user(s) will *see* a pause, so it is desirable to minimize this window. 3. Between the last time any page was copied from the source to the target, and when the VM was paused, the contents of that page may have changed - and therefore the copy we have on the target machine is out of date. Although we can keep track of which pages are out of date, for VMs with large amounts of memory, it is "slow" to transfer this information to the target machine. We want to resume execution before such a transfer would complete. 4. So, the guest begins executing on the target machine. The first time it touches its memory (via the UFFD-registered mapping), userspace wants to intercept this fault. Userspace checks whether or not the page is up to date, and if not, copies the updated page from the source machine, via the non-UFFD mapping. Finally, whether a copy was performed or not, userspace issues a UFFDIO_CONTINUE ioctl to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". We don't have to do all of the final updates on-demand. The userfaultfd manager can, in the background, also copy over updated pages once it receives the map of which pages are up-to-date or not. Interaction with Existing APIs ============================== Because this is a feature, a registered VMA could potentially receive both missing and minor faults. I spent some time thinking through how the existing API interacts with the new feature: UFFDIO_CONTINUE cannot be used to resolve non-minor faults, as it does not allocate a new page. If UFFDIO_CONTINUE is used on a non-minor fault: - For non-shared memory or shmem, -EINVAL is returned. - For hugetlb, -EFAULT is returned. UFFDIO_COPY and UFFDIO_ZEROPAGE cannot be used to resolve minor faults. Without modifications, the existing codepath assumes a new page needs to be allocated. This is okay, since userspace must have a second non-UFFD-registered mapping anyway, thus there isn't much reason to want to use these in any case (just memcpy or memset or similar). - If UFFDIO_COPY is used on a minor fault, -EEXIST is returned. - If UFFDIO_ZEROPAGE is used on a minor fault, -EEXIST is returned (or -EINVAL in the case of hugetlb, as UFFDIO_ZEROPAGE is unsupported in any case). - UFFDIO_WRITEPROTECT simply doesn't work with shared memory, and returns -ENOENT in that case (regardless of the kind of fault). Future Work =========== This series only supports hugetlbfs. I have a second series in flight to support shmem as well, extending the functionality. This series is more mature than the shmem support at this point, and the functionality works fully on hugetlbfs, so this series can be merged first and then shmem support will follow. This patch (of 6): This feature allows userspace to intercept "minor" faults. By "minor" faults, I mean the following situation: Let there exist two mappings (i.e., VMAs) to the same page(s). One of the mappings is registered with userfaultfd (in minor mode), and the other is not. Via the non-UFFD mapping, the underlying pages have already been allocated & filled with some contents. The UFFD mapping has not yet been faulted in; when it is touched for the first time, this results in what I'm calling a "minor" fault. As a concrete example, when working with hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing page. This commit adds the new registration mode, and sets the relevant flag on the VMAs being registered. In the hugetlb fault path, if we find that we have huge_pte_none(), but find_lock_page() does indeed find an existing page, then we have a "minor" fault, and if the VMA has the userfaultfd registration flag, we call into userfaultfd to handle it. This is implemented as a new registration mode, instead of an API feature. This is because the alternative implementation has significant drawbacks [1]. However, doing it this was requires we allocate a VM_* flag for the new registration mode. On 32-bit systems, there are no unused bits, so this feature is only supported on architectures with CONFIG_ARCH_USES_HIGH_VMA_FLAGS. When attempting to register a VMA in MINOR mode on 32-bit architectures, we return -EINVAL. [1] https://lore.kernel.org/patchwork/patch/1380226/ [peterx@redhat.com: fix minor fault page leak] Link: https://lkml.kernel.org/r/20210322175132.36659-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20210301222728.176417-1-axelrasmussen@google.com Link: https://lkml.kernel.org/r/20210301222728.176417-2-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michal Koutn" <mkoutny@suse.com> Cc: Michel Lespinasse <walken@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: Shawn Anastasio <shawn@anastas.io> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Steven Price <steven.price@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Adam Ruprecht <ruprecht@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Cannon Matthews <cannonmatthews@google.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Oliver Upton <oupton@google.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 04:35:36 +03:00
vma->vm_flags &= ~__VM_UFFD_FLAGS;
}
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 07:33:25 +03:00
mmap_write_unlock(mm);
userfaultfd_ctx_put(release_new_ctx);
}
/*
* ctx may go away after this if the userfault pseudo fd is
* already released.
*/
out:
userfaultfd: change mmap_changing to atomic Patch series "userfaultfd: minor bug fixes". Three unrelated bug fixes. The first two addresses possible issues (not too theoretical ones), but I did not encounter them in practice. The third patch addresses a test bug that causes the test to fail on my system. It has been sent before as part of a bigger RFC. This patch (of 3): mmap_changing is currently a boolean variable, which is set and cleared without any lock that protects against concurrent modifications. mmap_changing is supposed to mark whether userfaultfd page-faults handling should be retried since mappings are undergoing a change. However, concurrent calls, for instance to madvise(MADV_DONTNEED), might cause mmap_changing to be false, although the remove event was still not read (hence acknowledged) by the user. Change mmap_changing to atomic_t and increase/decrease appropriately. Add a debug assertion to see whether mmap_changing is negative. Link: https://lkml.kernel.org/r/20210808020724.1022515-1-namit@vmware.com Link: https://lkml.kernel.org/r/20210808020724.1022515-2-namit@vmware.com Fixes: df2cc96e77011 ("userfaultfd: prevent non-cooperative events vs mcopy_atomic races") Signed-off-by: Nadav Amit <namit@vmware.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Peter Xu <peterx@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03 00:58:56 +03:00
atomic_dec(&ctx->mmap_changing);
VM_BUG_ON(atomic_read(&ctx->mmap_changing) < 0);
userfaultfd_ctx_put(ctx);
}
static void userfaultfd_event_complete(struct userfaultfd_ctx *ctx,
struct userfaultfd_wait_queue *ewq)
{
ewq->msg.event = 0;
wake_up_locked(&ctx->event_wqh);
__remove_wait_queue(&ctx->event_wqh, &ewq->wq);
}
2017-02-23 02:42:27 +03:00
int dup_userfaultfd(struct vm_area_struct *vma, struct list_head *fcs)
{
struct userfaultfd_ctx *ctx = NULL, *octx;
struct userfaultfd_fork_ctx *fctx;
octx = vma->vm_userfaultfd_ctx.ctx;
if (!octx || !(octx->features & UFFD_FEATURE_EVENT_FORK)) {
vma->vm_userfaultfd_ctx = NULL_VM_UFFD_CTX;
userfaultfd: add minor fault registration mode Patch series "userfaultfd: add minor fault handling", v9. Overview ======== This series adds a new userfaultfd feature, UFFD_FEATURE_MINOR_HUGETLBFS. When enabled (via the UFFDIO_API ioctl), this feature means that any hugetlbfs VMAs registered with UFFDIO_REGISTER_MODE_MISSING will *also* get events for "minor" faults. By "minor" fault, I mean the following situation: Let there exist two mappings (i.e., VMAs) to the same page(s) (shared memory). One of the mappings is registered with userfaultfd (in minor mode), and the other is not. Via the non-UFFD mapping, the underlying pages have already been allocated & filled with some contents. The UFFD mapping has not yet been faulted in; when it is touched for the first time, this results in what I'm calling a "minor" fault. As a concrete example, when working with hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing page. We also add a new ioctl to resolve such faults: UFFDIO_CONTINUE. The idea is, userspace resolves the fault by either a) doing nothing if the contents are already correct, or b) updating the underlying contents using the second, non-UFFD mapping (via memcpy/memset or similar, or something fancier like RDMA, or etc...). In either case, userspace issues UFFDIO_CONTINUE to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". Use Case ======== Consider the use case of VM live migration (e.g. under QEMU/KVM): 1. While a VM is still running, we copy the contents of its memory to a target machine. The pages are populated on the target by writing to the non-UFFD mapping, using the setup described above. The VM is still running (and therefore its memory is likely changing), so this may be repeated several times, until we decide the target is "up to date enough". 2. We pause the VM on the source, and start executing on the target machine. During this gap, the VM's user(s) will *see* a pause, so it is desirable to minimize this window. 3. Between the last time any page was copied from the source to the target, and when the VM was paused, the contents of that page may have changed - and therefore the copy we have on the target machine is out of date. Although we can keep track of which pages are out of date, for VMs with large amounts of memory, it is "slow" to transfer this information to the target machine. We want to resume execution before such a transfer would complete. 4. So, the guest begins executing on the target machine. The first time it touches its memory (via the UFFD-registered mapping), userspace wants to intercept this fault. Userspace checks whether or not the page is up to date, and if not, copies the updated page from the source machine, via the non-UFFD mapping. Finally, whether a copy was performed or not, userspace issues a UFFDIO_CONTINUE ioctl to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". We don't have to do all of the final updates on-demand. The userfaultfd manager can, in the background, also copy over updated pages once it receives the map of which pages are up-to-date or not. Interaction with Existing APIs ============================== Because this is a feature, a registered VMA could potentially receive both missing and minor faults. I spent some time thinking through how the existing API interacts with the new feature: UFFDIO_CONTINUE cannot be used to resolve non-minor faults, as it does not allocate a new page. If UFFDIO_CONTINUE is used on a non-minor fault: - For non-shared memory or shmem, -EINVAL is returned. - For hugetlb, -EFAULT is returned. UFFDIO_COPY and UFFDIO_ZEROPAGE cannot be used to resolve minor faults. Without modifications, the existing codepath assumes a new page needs to be allocated. This is okay, since userspace must have a second non-UFFD-registered mapping anyway, thus there isn't much reason to want to use these in any case (just memcpy or memset or similar). - If UFFDIO_COPY is used on a minor fault, -EEXIST is returned. - If UFFDIO_ZEROPAGE is used on a minor fault, -EEXIST is returned (or -EINVAL in the case of hugetlb, as UFFDIO_ZEROPAGE is unsupported in any case). - UFFDIO_WRITEPROTECT simply doesn't work with shared memory, and returns -ENOENT in that case (regardless of the kind of fault). Future Work =========== This series only supports hugetlbfs. I have a second series in flight to support shmem as well, extending the functionality. This series is more mature than the shmem support at this point, and the functionality works fully on hugetlbfs, so this series can be merged first and then shmem support will follow. This patch (of 6): This feature allows userspace to intercept "minor" faults. By "minor" faults, I mean the following situation: Let there exist two mappings (i.e., VMAs) to the same page(s). One of the mappings is registered with userfaultfd (in minor mode), and the other is not. Via the non-UFFD mapping, the underlying pages have already been allocated & filled with some contents. The UFFD mapping has not yet been faulted in; when it is touched for the first time, this results in what I'm calling a "minor" fault. As a concrete example, when working with hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing page. This commit adds the new registration mode, and sets the relevant flag on the VMAs being registered. In the hugetlb fault path, if we find that we have huge_pte_none(), but find_lock_page() does indeed find an existing page, then we have a "minor" fault, and if the VMA has the userfaultfd registration flag, we call into userfaultfd to handle it. This is implemented as a new registration mode, instead of an API feature. This is because the alternative implementation has significant drawbacks [1]. However, doing it this was requires we allocate a VM_* flag for the new registration mode. On 32-bit systems, there are no unused bits, so this feature is only supported on architectures with CONFIG_ARCH_USES_HIGH_VMA_FLAGS. When attempting to register a VMA in MINOR mode on 32-bit architectures, we return -EINVAL. [1] https://lore.kernel.org/patchwork/patch/1380226/ [peterx@redhat.com: fix minor fault page leak] Link: https://lkml.kernel.org/r/20210322175132.36659-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20210301222728.176417-1-axelrasmussen@google.com Link: https://lkml.kernel.org/r/20210301222728.176417-2-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michal Koutn" <mkoutny@suse.com> Cc: Michel Lespinasse <walken@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: Shawn Anastasio <shawn@anastas.io> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Steven Price <steven.price@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Adam Ruprecht <ruprecht@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Cannon Matthews <cannonmatthews@google.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Oliver Upton <oupton@google.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 04:35:36 +03:00
vma->vm_flags &= ~__VM_UFFD_FLAGS;
2017-02-23 02:42:27 +03:00
return 0;
}
list_for_each_entry(fctx, fcs, list)
if (fctx->orig == octx) {
ctx = fctx->new;
break;
}
if (!ctx) {
fctx = kmalloc(sizeof(*fctx), GFP_KERNEL);
if (!fctx)
return -ENOMEM;
ctx = kmem_cache_alloc(userfaultfd_ctx_cachep, GFP_KERNEL);
if (!ctx) {
kfree(fctx);
return -ENOMEM;
}
refcount_set(&ctx->refcount, 1);
2017-02-23 02:42:27 +03:00
ctx->flags = octx->flags;
ctx->features = octx->features;
ctx->released = false;
userfaultfd: change mmap_changing to atomic Patch series "userfaultfd: minor bug fixes". Three unrelated bug fixes. The first two addresses possible issues (not too theoretical ones), but I did not encounter them in practice. The third patch addresses a test bug that causes the test to fail on my system. It has been sent before as part of a bigger RFC. This patch (of 3): mmap_changing is currently a boolean variable, which is set and cleared without any lock that protects against concurrent modifications. mmap_changing is supposed to mark whether userfaultfd page-faults handling should be retried since mappings are undergoing a change. However, concurrent calls, for instance to madvise(MADV_DONTNEED), might cause mmap_changing to be false, although the remove event was still not read (hence acknowledged) by the user. Change mmap_changing to atomic_t and increase/decrease appropriately. Add a debug assertion to see whether mmap_changing is negative. Link: https://lkml.kernel.org/r/20210808020724.1022515-1-namit@vmware.com Link: https://lkml.kernel.org/r/20210808020724.1022515-2-namit@vmware.com Fixes: df2cc96e77011 ("userfaultfd: prevent non-cooperative events vs mcopy_atomic races") Signed-off-by: Nadav Amit <namit@vmware.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Peter Xu <peterx@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03 00:58:56 +03:00
atomic_set(&ctx->mmap_changing, 0);
2017-02-23 02:42:27 +03:00
ctx->mm = vma->vm_mm;
mmgrab(ctx->mm);
2017-02-23 02:42:27 +03:00
userfaultfd_ctx_get(octx);
userfaultfd: change mmap_changing to atomic Patch series "userfaultfd: minor bug fixes". Three unrelated bug fixes. The first two addresses possible issues (not too theoretical ones), but I did not encounter them in practice. The third patch addresses a test bug that causes the test to fail on my system. It has been sent before as part of a bigger RFC. This patch (of 3): mmap_changing is currently a boolean variable, which is set and cleared without any lock that protects against concurrent modifications. mmap_changing is supposed to mark whether userfaultfd page-faults handling should be retried since mappings are undergoing a change. However, concurrent calls, for instance to madvise(MADV_DONTNEED), might cause mmap_changing to be false, although the remove event was still not read (hence acknowledged) by the user. Change mmap_changing to atomic_t and increase/decrease appropriately. Add a debug assertion to see whether mmap_changing is negative. Link: https://lkml.kernel.org/r/20210808020724.1022515-1-namit@vmware.com Link: https://lkml.kernel.org/r/20210808020724.1022515-2-namit@vmware.com Fixes: df2cc96e77011 ("userfaultfd: prevent non-cooperative events vs mcopy_atomic races") Signed-off-by: Nadav Amit <namit@vmware.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Peter Xu <peterx@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03 00:58:56 +03:00
atomic_inc(&octx->mmap_changing);
2017-02-23 02:42:27 +03:00
fctx->orig = octx;
fctx->new = ctx;
list_add_tail(&fctx->list, fcs);
}
vma->vm_userfaultfd_ctx.ctx = ctx;
return 0;
}
static void dup_fctx(struct userfaultfd_fork_ctx *fctx)
2017-02-23 02:42:27 +03:00
{
struct userfaultfd_ctx *ctx = fctx->orig;
struct userfaultfd_wait_queue ewq;
msg_init(&ewq.msg);
ewq.msg.event = UFFD_EVENT_FORK;
ewq.msg.arg.reserved.reserved1 = (unsigned long)fctx->new;
userfaultfd_event_wait_completion(ctx, &ewq);
2017-02-23 02:42:27 +03:00
}
void dup_userfaultfd_complete(struct list_head *fcs)
{
struct userfaultfd_fork_ctx *fctx, *n;
list_for_each_entry_safe(fctx, n, fcs, list) {
dup_fctx(fctx);
2017-02-23 02:42:27 +03:00
list_del(&fctx->list);
kfree(fctx);
}
}
void mremap_userfaultfd_prep(struct vm_area_struct *vma,
struct vm_userfaultfd_ctx *vm_ctx)
{
struct userfaultfd_ctx *ctx;
ctx = vma->vm_userfaultfd_ctx.ctx;
if (!ctx)
return;
if (ctx->features & UFFD_FEATURE_EVENT_REMAP) {
vm_ctx->ctx = ctx;
userfaultfd_ctx_get(ctx);
userfaultfd: change mmap_changing to atomic Patch series "userfaultfd: minor bug fixes". Three unrelated bug fixes. The first two addresses possible issues (not too theoretical ones), but I did not encounter them in practice. The third patch addresses a test bug that causes the test to fail on my system. It has been sent before as part of a bigger RFC. This patch (of 3): mmap_changing is currently a boolean variable, which is set and cleared without any lock that protects against concurrent modifications. mmap_changing is supposed to mark whether userfaultfd page-faults handling should be retried since mappings are undergoing a change. However, concurrent calls, for instance to madvise(MADV_DONTNEED), might cause mmap_changing to be false, although the remove event was still not read (hence acknowledged) by the user. Change mmap_changing to atomic_t and increase/decrease appropriately. Add a debug assertion to see whether mmap_changing is negative. Link: https://lkml.kernel.org/r/20210808020724.1022515-1-namit@vmware.com Link: https://lkml.kernel.org/r/20210808020724.1022515-2-namit@vmware.com Fixes: df2cc96e77011 ("userfaultfd: prevent non-cooperative events vs mcopy_atomic races") Signed-off-by: Nadav Amit <namit@vmware.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Peter Xu <peterx@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03 00:58:56 +03:00
atomic_inc(&ctx->mmap_changing);
} else {
/* Drop uffd context if remap feature not enabled */
vma->vm_userfaultfd_ctx = NULL_VM_UFFD_CTX;
userfaultfd: add minor fault registration mode Patch series "userfaultfd: add minor fault handling", v9. Overview ======== This series adds a new userfaultfd feature, UFFD_FEATURE_MINOR_HUGETLBFS. When enabled (via the UFFDIO_API ioctl), this feature means that any hugetlbfs VMAs registered with UFFDIO_REGISTER_MODE_MISSING will *also* get events for "minor" faults. By "minor" fault, I mean the following situation: Let there exist two mappings (i.e., VMAs) to the same page(s) (shared memory). One of the mappings is registered with userfaultfd (in minor mode), and the other is not. Via the non-UFFD mapping, the underlying pages have already been allocated & filled with some contents. The UFFD mapping has not yet been faulted in; when it is touched for the first time, this results in what I'm calling a "minor" fault. As a concrete example, when working with hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing page. We also add a new ioctl to resolve such faults: UFFDIO_CONTINUE. The idea is, userspace resolves the fault by either a) doing nothing if the contents are already correct, or b) updating the underlying contents using the second, non-UFFD mapping (via memcpy/memset or similar, or something fancier like RDMA, or etc...). In either case, userspace issues UFFDIO_CONTINUE to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". Use Case ======== Consider the use case of VM live migration (e.g. under QEMU/KVM): 1. While a VM is still running, we copy the contents of its memory to a target machine. The pages are populated on the target by writing to the non-UFFD mapping, using the setup described above. The VM is still running (and therefore its memory is likely changing), so this may be repeated several times, until we decide the target is "up to date enough". 2. We pause the VM on the source, and start executing on the target machine. During this gap, the VM's user(s) will *see* a pause, so it is desirable to minimize this window. 3. Between the last time any page was copied from the source to the target, and when the VM was paused, the contents of that page may have changed - and therefore the copy we have on the target machine is out of date. Although we can keep track of which pages are out of date, for VMs with large amounts of memory, it is "slow" to transfer this information to the target machine. We want to resume execution before such a transfer would complete. 4. So, the guest begins executing on the target machine. The first time it touches its memory (via the UFFD-registered mapping), userspace wants to intercept this fault. Userspace checks whether or not the page is up to date, and if not, copies the updated page from the source machine, via the non-UFFD mapping. Finally, whether a copy was performed or not, userspace issues a UFFDIO_CONTINUE ioctl to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". We don't have to do all of the final updates on-demand. The userfaultfd manager can, in the background, also copy over updated pages once it receives the map of which pages are up-to-date or not. Interaction with Existing APIs ============================== Because this is a feature, a registered VMA could potentially receive both missing and minor faults. I spent some time thinking through how the existing API interacts with the new feature: UFFDIO_CONTINUE cannot be used to resolve non-minor faults, as it does not allocate a new page. If UFFDIO_CONTINUE is used on a non-minor fault: - For non-shared memory or shmem, -EINVAL is returned. - For hugetlb, -EFAULT is returned. UFFDIO_COPY and UFFDIO_ZEROPAGE cannot be used to resolve minor faults. Without modifications, the existing codepath assumes a new page needs to be allocated. This is okay, since userspace must have a second non-UFFD-registered mapping anyway, thus there isn't much reason to want to use these in any case (just memcpy or memset or similar). - If UFFDIO_COPY is used on a minor fault, -EEXIST is returned. - If UFFDIO_ZEROPAGE is used on a minor fault, -EEXIST is returned (or -EINVAL in the case of hugetlb, as UFFDIO_ZEROPAGE is unsupported in any case). - UFFDIO_WRITEPROTECT simply doesn't work with shared memory, and returns -ENOENT in that case (regardless of the kind of fault). Future Work =========== This series only supports hugetlbfs. I have a second series in flight to support shmem as well, extending the functionality. This series is more mature than the shmem support at this point, and the functionality works fully on hugetlbfs, so this series can be merged first and then shmem support will follow. This patch (of 6): This feature allows userspace to intercept "minor" faults. By "minor" faults, I mean the following situation: Let there exist two mappings (i.e., VMAs) to the same page(s). One of the mappings is registered with userfaultfd (in minor mode), and the other is not. Via the non-UFFD mapping, the underlying pages have already been allocated & filled with some contents. The UFFD mapping has not yet been faulted in; when it is touched for the first time, this results in what I'm calling a "minor" fault. As a concrete example, when working with hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing page. This commit adds the new registration mode, and sets the relevant flag on the VMAs being registered. In the hugetlb fault path, if we find that we have huge_pte_none(), but find_lock_page() does indeed find an existing page, then we have a "minor" fault, and if the VMA has the userfaultfd registration flag, we call into userfaultfd to handle it. This is implemented as a new registration mode, instead of an API feature. This is because the alternative implementation has significant drawbacks [1]. However, doing it this was requires we allocate a VM_* flag for the new registration mode. On 32-bit systems, there are no unused bits, so this feature is only supported on architectures with CONFIG_ARCH_USES_HIGH_VMA_FLAGS. When attempting to register a VMA in MINOR mode on 32-bit architectures, we return -EINVAL. [1] https://lore.kernel.org/patchwork/patch/1380226/ [peterx@redhat.com: fix minor fault page leak] Link: https://lkml.kernel.org/r/20210322175132.36659-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20210301222728.176417-1-axelrasmussen@google.com Link: https://lkml.kernel.org/r/20210301222728.176417-2-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michal Koutn" <mkoutny@suse.com> Cc: Michel Lespinasse <walken@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: Shawn Anastasio <shawn@anastas.io> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Steven Price <steven.price@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Adam Ruprecht <ruprecht@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Cannon Matthews <cannonmatthews@google.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Oliver Upton <oupton@google.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 04:35:36 +03:00
vma->vm_flags &= ~__VM_UFFD_FLAGS;
}
}
void mremap_userfaultfd_complete(struct vm_userfaultfd_ctx *vm_ctx,
unsigned long from, unsigned long to,
unsigned long len)
{
struct userfaultfd_ctx *ctx = vm_ctx->ctx;
struct userfaultfd_wait_queue ewq;
if (!ctx)
return;
if (to & ~PAGE_MASK) {
userfaultfd_ctx_put(ctx);
return;
}
msg_init(&ewq.msg);
ewq.msg.event = UFFD_EVENT_REMAP;
ewq.msg.arg.remap.from = from;
ewq.msg.arg.remap.to = to;
ewq.msg.arg.remap.len = len;
userfaultfd_event_wait_completion(ctx, &ewq);
}
bool userfaultfd_remove(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
struct mm_struct *mm = vma->vm_mm;
struct userfaultfd_ctx *ctx;
struct userfaultfd_wait_queue ewq;
ctx = vma->vm_userfaultfd_ctx.ctx;
if (!ctx || !(ctx->features & UFFD_FEATURE_EVENT_REMOVE))
return true;
userfaultfd_ctx_get(ctx);
userfaultfd: change mmap_changing to atomic Patch series "userfaultfd: minor bug fixes". Three unrelated bug fixes. The first two addresses possible issues (not too theoretical ones), but I did not encounter them in practice. The third patch addresses a test bug that causes the test to fail on my system. It has been sent before as part of a bigger RFC. This patch (of 3): mmap_changing is currently a boolean variable, which is set and cleared without any lock that protects against concurrent modifications. mmap_changing is supposed to mark whether userfaultfd page-faults handling should be retried since mappings are undergoing a change. However, concurrent calls, for instance to madvise(MADV_DONTNEED), might cause mmap_changing to be false, although the remove event was still not read (hence acknowledged) by the user. Change mmap_changing to atomic_t and increase/decrease appropriately. Add a debug assertion to see whether mmap_changing is negative. Link: https://lkml.kernel.org/r/20210808020724.1022515-1-namit@vmware.com Link: https://lkml.kernel.org/r/20210808020724.1022515-2-namit@vmware.com Fixes: df2cc96e77011 ("userfaultfd: prevent non-cooperative events vs mcopy_atomic races") Signed-off-by: Nadav Amit <namit@vmware.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Peter Xu <peterx@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03 00:58:56 +03:00
atomic_inc(&ctx->mmap_changing);
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 07:33:25 +03:00
mmap_read_unlock(mm);
msg_init(&ewq.msg);
ewq.msg.event = UFFD_EVENT_REMOVE;
ewq.msg.arg.remove.start = start;
ewq.msg.arg.remove.end = end;
userfaultfd_event_wait_completion(ctx, &ewq);
return false;
}
static bool has_unmap_ctx(struct userfaultfd_ctx *ctx, struct list_head *unmaps,
unsigned long start, unsigned long end)
{
struct userfaultfd_unmap_ctx *unmap_ctx;
list_for_each_entry(unmap_ctx, unmaps, list)
if (unmap_ctx->ctx == ctx && unmap_ctx->start == start &&
unmap_ctx->end == end)
return true;
return false;
}
int userfaultfd_unmap_prep(struct vm_area_struct *vma,
unsigned long start, unsigned long end,
struct list_head *unmaps)
{
for ( ; vma && vma->vm_start < end; vma = vma->vm_next) {
struct userfaultfd_unmap_ctx *unmap_ctx;
struct userfaultfd_ctx *ctx = vma->vm_userfaultfd_ctx.ctx;
if (!ctx || !(ctx->features & UFFD_FEATURE_EVENT_UNMAP) ||
has_unmap_ctx(ctx, unmaps, start, end))
continue;
unmap_ctx = kzalloc(sizeof(*unmap_ctx), GFP_KERNEL);
if (!unmap_ctx)
return -ENOMEM;
userfaultfd_ctx_get(ctx);
userfaultfd: change mmap_changing to atomic Patch series "userfaultfd: minor bug fixes". Three unrelated bug fixes. The first two addresses possible issues (not too theoretical ones), but I did not encounter them in practice. The third patch addresses a test bug that causes the test to fail on my system. It has been sent before as part of a bigger RFC. This patch (of 3): mmap_changing is currently a boolean variable, which is set and cleared without any lock that protects against concurrent modifications. mmap_changing is supposed to mark whether userfaultfd page-faults handling should be retried since mappings are undergoing a change. However, concurrent calls, for instance to madvise(MADV_DONTNEED), might cause mmap_changing to be false, although the remove event was still not read (hence acknowledged) by the user. Change mmap_changing to atomic_t and increase/decrease appropriately. Add a debug assertion to see whether mmap_changing is negative. Link: https://lkml.kernel.org/r/20210808020724.1022515-1-namit@vmware.com Link: https://lkml.kernel.org/r/20210808020724.1022515-2-namit@vmware.com Fixes: df2cc96e77011 ("userfaultfd: prevent non-cooperative events vs mcopy_atomic races") Signed-off-by: Nadav Amit <namit@vmware.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Peter Xu <peterx@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03 00:58:56 +03:00
atomic_inc(&ctx->mmap_changing);
unmap_ctx->ctx = ctx;
unmap_ctx->start = start;
unmap_ctx->end = end;
list_add_tail(&unmap_ctx->list, unmaps);
}
return 0;
}
void userfaultfd_unmap_complete(struct mm_struct *mm, struct list_head *uf)
{
struct userfaultfd_unmap_ctx *ctx, *n;
struct userfaultfd_wait_queue ewq;
list_for_each_entry_safe(ctx, n, uf, list) {
msg_init(&ewq.msg);
ewq.msg.event = UFFD_EVENT_UNMAP;
ewq.msg.arg.remove.start = ctx->start;
ewq.msg.arg.remove.end = ctx->end;
userfaultfd_event_wait_completion(ctx->ctx, &ewq);
list_del(&ctx->list);
kfree(ctx);
}
}
static int userfaultfd_release(struct inode *inode, struct file *file)
{
struct userfaultfd_ctx *ctx = file->private_data;
struct mm_struct *mm = ctx->mm;
struct vm_area_struct *vma, *prev;
/* len == 0 means wake all */
struct userfaultfd_wake_range range = { .len = 0, };
unsigned long new_flags;
locking/atomics: COCCINELLE/treewide: Convert trivial ACCESS_ONCE() patterns to READ_ONCE()/WRITE_ONCE() Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-10-24 00:07:29 +03:00
WRITE_ONCE(ctx->released, true);
if (!mmget_not_zero(mm))
goto wakeup;
/*
* Flush page faults out of all CPUs. NOTE: all page faults
* must be retried without returning VM_FAULT_SIGBUS if
* userfaultfd_ctx_get() succeeds but vma->vma_userfault_ctx
* changes while handle_userfault released the mmap_lock. So
* it's critical that released is set to true (above), before
* taking the mmap_lock for writing.
*/
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 07:33:25 +03:00
mmap_write_lock(mm);
prev = NULL;
for (vma = mm->mmap; vma; vma = vma->vm_next) {
cond_resched();
BUG_ON(!!vma->vm_userfaultfd_ctx.ctx ^
userfaultfd: add minor fault registration mode Patch series "userfaultfd: add minor fault handling", v9. Overview ======== This series adds a new userfaultfd feature, UFFD_FEATURE_MINOR_HUGETLBFS. When enabled (via the UFFDIO_API ioctl), this feature means that any hugetlbfs VMAs registered with UFFDIO_REGISTER_MODE_MISSING will *also* get events for "minor" faults. By "minor" fault, I mean the following situation: Let there exist two mappings (i.e., VMAs) to the same page(s) (shared memory). One of the mappings is registered with userfaultfd (in minor mode), and the other is not. Via the non-UFFD mapping, the underlying pages have already been allocated & filled with some contents. The UFFD mapping has not yet been faulted in; when it is touched for the first time, this results in what I'm calling a "minor" fault. As a concrete example, when working with hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing page. We also add a new ioctl to resolve such faults: UFFDIO_CONTINUE. The idea is, userspace resolves the fault by either a) doing nothing if the contents are already correct, or b) updating the underlying contents using the second, non-UFFD mapping (via memcpy/memset or similar, or something fancier like RDMA, or etc...). In either case, userspace issues UFFDIO_CONTINUE to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". Use Case ======== Consider the use case of VM live migration (e.g. under QEMU/KVM): 1. While a VM is still running, we copy the contents of its memory to a target machine. The pages are populated on the target by writing to the non-UFFD mapping, using the setup described above. The VM is still running (and therefore its memory is likely changing), so this may be repeated several times, until we decide the target is "up to date enough". 2. We pause the VM on the source, and start executing on the target machine. During this gap, the VM's user(s) will *see* a pause, so it is desirable to minimize this window. 3. Between the last time any page was copied from the source to the target, and when the VM was paused, the contents of that page may have changed - and therefore the copy we have on the target machine is out of date. Although we can keep track of which pages are out of date, for VMs with large amounts of memory, it is "slow" to transfer this information to the target machine. We want to resume execution before such a transfer would complete. 4. So, the guest begins executing on the target machine. The first time it touches its memory (via the UFFD-registered mapping), userspace wants to intercept this fault. Userspace checks whether or not the page is up to date, and if not, copies the updated page from the source machine, via the non-UFFD mapping. Finally, whether a copy was performed or not, userspace issues a UFFDIO_CONTINUE ioctl to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". We don't have to do all of the final updates on-demand. The userfaultfd manager can, in the background, also copy over updated pages once it receives the map of which pages are up-to-date or not. Interaction with Existing APIs ============================== Because this is a feature, a registered VMA could potentially receive both missing and minor faults. I spent some time thinking through how the existing API interacts with the new feature: UFFDIO_CONTINUE cannot be used to resolve non-minor faults, as it does not allocate a new page. If UFFDIO_CONTINUE is used on a non-minor fault: - For non-shared memory or shmem, -EINVAL is returned. - For hugetlb, -EFAULT is returned. UFFDIO_COPY and UFFDIO_ZEROPAGE cannot be used to resolve minor faults. Without modifications, the existing codepath assumes a new page needs to be allocated. This is okay, since userspace must have a second non-UFFD-registered mapping anyway, thus there isn't much reason to want to use these in any case (just memcpy or memset or similar). - If UFFDIO_COPY is used on a minor fault, -EEXIST is returned. - If UFFDIO_ZEROPAGE is used on a minor fault, -EEXIST is returned (or -EINVAL in the case of hugetlb, as UFFDIO_ZEROPAGE is unsupported in any case). - UFFDIO_WRITEPROTECT simply doesn't work with shared memory, and returns -ENOENT in that case (regardless of the kind of fault). Future Work =========== This series only supports hugetlbfs. I have a second series in flight to support shmem as well, extending the functionality. This series is more mature than the shmem support at this point, and the functionality works fully on hugetlbfs, so this series can be merged first and then shmem support will follow. This patch (of 6): This feature allows userspace to intercept "minor" faults. By "minor" faults, I mean the following situation: Let there exist two mappings (i.e., VMAs) to the same page(s). One of the mappings is registered with userfaultfd (in minor mode), and the other is not. Via the non-UFFD mapping, the underlying pages have already been allocated & filled with some contents. The UFFD mapping has not yet been faulted in; when it is touched for the first time, this results in what I'm calling a "minor" fault. As a concrete example, when working with hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing page. This commit adds the new registration mode, and sets the relevant flag on the VMAs being registered. In the hugetlb fault path, if we find that we have huge_pte_none(), but find_lock_page() does indeed find an existing page, then we have a "minor" fault, and if the VMA has the userfaultfd registration flag, we call into userfaultfd to handle it. This is implemented as a new registration mode, instead of an API feature. This is because the alternative implementation has significant drawbacks [1]. However, doing it this was requires we allocate a VM_* flag for the new registration mode. On 32-bit systems, there are no unused bits, so this feature is only supported on architectures with CONFIG_ARCH_USES_HIGH_VMA_FLAGS. When attempting to register a VMA in MINOR mode on 32-bit architectures, we return -EINVAL. [1] https://lore.kernel.org/patchwork/patch/1380226/ [peterx@redhat.com: fix minor fault page leak] Link: https://lkml.kernel.org/r/20210322175132.36659-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20210301222728.176417-1-axelrasmussen@google.com Link: https://lkml.kernel.org/r/20210301222728.176417-2-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michal Koutn" <mkoutny@suse.com> Cc: Michel Lespinasse <walken@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: Shawn Anastasio <shawn@anastas.io> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Steven Price <steven.price@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Adam Ruprecht <ruprecht@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Cannon Matthews <cannonmatthews@google.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Oliver Upton <oupton@google.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 04:35:36 +03:00
!!(vma->vm_flags & __VM_UFFD_FLAGS));
if (vma->vm_userfaultfd_ctx.ctx != ctx) {
prev = vma;
continue;
}
userfaultfd: add minor fault registration mode Patch series "userfaultfd: add minor fault handling", v9. Overview ======== This series adds a new userfaultfd feature, UFFD_FEATURE_MINOR_HUGETLBFS. When enabled (via the UFFDIO_API ioctl), this feature means that any hugetlbfs VMAs registered with UFFDIO_REGISTER_MODE_MISSING will *also* get events for "minor" faults. By "minor" fault, I mean the following situation: Let there exist two mappings (i.e., VMAs) to the same page(s) (shared memory). One of the mappings is registered with userfaultfd (in minor mode), and the other is not. Via the non-UFFD mapping, the underlying pages have already been allocated & filled with some contents. The UFFD mapping has not yet been faulted in; when it is touched for the first time, this results in what I'm calling a "minor" fault. As a concrete example, when working with hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing page. We also add a new ioctl to resolve such faults: UFFDIO_CONTINUE. The idea is, userspace resolves the fault by either a) doing nothing if the contents are already correct, or b) updating the underlying contents using the second, non-UFFD mapping (via memcpy/memset or similar, or something fancier like RDMA, or etc...). In either case, userspace issues UFFDIO_CONTINUE to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". Use Case ======== Consider the use case of VM live migration (e.g. under QEMU/KVM): 1. While a VM is still running, we copy the contents of its memory to a target machine. The pages are populated on the target by writing to the non-UFFD mapping, using the setup described above. The VM is still running (and therefore its memory is likely changing), so this may be repeated several times, until we decide the target is "up to date enough". 2. We pause the VM on the source, and start executing on the target machine. During this gap, the VM's user(s) will *see* a pause, so it is desirable to minimize this window. 3. Between the last time any page was copied from the source to the target, and when the VM was paused, the contents of that page may have changed - and therefore the copy we have on the target machine is out of date. Although we can keep track of which pages are out of date, for VMs with large amounts of memory, it is "slow" to transfer this information to the target machine. We want to resume execution before such a transfer would complete. 4. So, the guest begins executing on the target machine. The first time it touches its memory (via the UFFD-registered mapping), userspace wants to intercept this fault. Userspace checks whether or not the page is up to date, and if not, copies the updated page from the source machine, via the non-UFFD mapping. Finally, whether a copy was performed or not, userspace issues a UFFDIO_CONTINUE ioctl to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". We don't have to do all of the final updates on-demand. The userfaultfd manager can, in the background, also copy over updated pages once it receives the map of which pages are up-to-date or not. Interaction with Existing APIs ============================== Because this is a feature, a registered VMA could potentially receive both missing and minor faults. I spent some time thinking through how the existing API interacts with the new feature: UFFDIO_CONTINUE cannot be used to resolve non-minor faults, as it does not allocate a new page. If UFFDIO_CONTINUE is used on a non-minor fault: - For non-shared memory or shmem, -EINVAL is returned. - For hugetlb, -EFAULT is returned. UFFDIO_COPY and UFFDIO_ZEROPAGE cannot be used to resolve minor faults. Without modifications, the existing codepath assumes a new page needs to be allocated. This is okay, since userspace must have a second non-UFFD-registered mapping anyway, thus there isn't much reason to want to use these in any case (just memcpy or memset or similar). - If UFFDIO_COPY is used on a minor fault, -EEXIST is returned. - If UFFDIO_ZEROPAGE is used on a minor fault, -EEXIST is returned (or -EINVAL in the case of hugetlb, as UFFDIO_ZEROPAGE is unsupported in any case). - UFFDIO_WRITEPROTECT simply doesn't work with shared memory, and returns -ENOENT in that case (regardless of the kind of fault). Future Work =========== This series only supports hugetlbfs. I have a second series in flight to support shmem as well, extending the functionality. This series is more mature than the shmem support at this point, and the functionality works fully on hugetlbfs, so this series can be merged first and then shmem support will follow. This patch (of 6): This feature allows userspace to intercept "minor" faults. By "minor" faults, I mean the following situation: Let there exist two mappings (i.e., VMAs) to the same page(s). One of the mappings is registered with userfaultfd (in minor mode), and the other is not. Via the non-UFFD mapping, the underlying pages have already been allocated & filled with some contents. The UFFD mapping has not yet been faulted in; when it is touched for the first time, this results in what I'm calling a "minor" fault. As a concrete example, when working with hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing page. This commit adds the new registration mode, and sets the relevant flag on the VMAs being registered. In the hugetlb fault path, if we find that we have huge_pte_none(), but find_lock_page() does indeed find an existing page, then we have a "minor" fault, and if the VMA has the userfaultfd registration flag, we call into userfaultfd to handle it. This is implemented as a new registration mode, instead of an API feature. This is because the alternative implementation has significant drawbacks [1]. However, doing it this was requires we allocate a VM_* flag for the new registration mode. On 32-bit systems, there are no unused bits, so this feature is only supported on architectures with CONFIG_ARCH_USES_HIGH_VMA_FLAGS. When attempting to register a VMA in MINOR mode on 32-bit architectures, we return -EINVAL. [1] https://lore.kernel.org/patchwork/patch/1380226/ [peterx@redhat.com: fix minor fault page leak] Link: https://lkml.kernel.org/r/20210322175132.36659-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20210301222728.176417-1-axelrasmussen@google.com Link: https://lkml.kernel.org/r/20210301222728.176417-2-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michal Koutn" <mkoutny@suse.com> Cc: Michel Lespinasse <walken@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: Shawn Anastasio <shawn@anastas.io> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Steven Price <steven.price@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Adam Ruprecht <ruprecht@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Cannon Matthews <cannonmatthews@google.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Oliver Upton <oupton@google.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 04:35:36 +03:00
new_flags = vma->vm_flags & ~__VM_UFFD_FLAGS;
prev = vma_merge(mm, prev, vma->vm_start, vma->vm_end,
new_flags, vma->anon_vma,
vma->vm_file, vma->vm_pgoff,
vma_policy(vma),
2022-03-05 07:28:51 +03:00
NULL_VM_UFFD_CTX, anon_vma_name(vma));
if (prev)
vma = prev;
else
prev = vma;
vma->vm_flags = new_flags;
vma->vm_userfaultfd_ctx = NULL_VM_UFFD_CTX;
}
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 07:33:25 +03:00
mmap_write_unlock(mm);
mmput(mm);
wakeup:
/*
* After no new page faults can wait on this fault_*wqh, flush
* the last page faults that may have been already waiting on
* the fault_*wqh.
*/
fs/userfaultfd.c: disable irqs for fault_pending and event locks When IOCB_CMD_POLL is used on a userfaultfd, aio_poll() disables IRQs and takes kioctx::ctx_lock, then userfaultfd_ctx::fd_wqh.lock. This may have to wait for userfaultfd_ctx::fd_wqh.lock to be released by userfaultfd_ctx_read(), which in turn can be waiting for userfaultfd_ctx::fault_pending_wqh.lock or userfaultfd_ctx::event_wqh.lock. But elsewhere the fault_pending_wqh and event_wqh locks are taken with IRQs enabled. Since the IRQ handler may take kioctx::ctx_lock, lockdep reports that a deadlock is possible. Fix it by always disabling IRQs when taking the fault_pending_wqh and event_wqh locks. Commit ae62c16e105a ("userfaultfd: disable irqs when taking the waitqueue lock") didn't fix this because it only accounted for the fd_wqh lock, not the other locks nested inside it. Link: http://lkml.kernel.org/r/20190627075004.21259-1-ebiggers@kernel.org Fixes: bfe4037e722e ("aio: implement IOCB_CMD_POLL") Signed-off-by: Eric Biggers <ebiggers@google.com> Reported-by: syzbot+fab6de82892b6b9c6191@syzkaller.appspotmail.com Reported-by: syzbot+53c0b767f7ca0dc0c451@syzkaller.appspotmail.com Reported-by: syzbot+a3accb352f9c22041cfa@syzkaller.appspotmail.com Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> [4.19+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-05 01:14:39 +03:00
spin_lock_irq(&ctx->fault_pending_wqh.lock);
__wake_up_locked_key(&ctx->fault_pending_wqh, TASK_NORMAL, &range);
__wake_up(&ctx->fault_wqh, TASK_NORMAL, 1, &range);
fs/userfaultfd.c: disable irqs for fault_pending and event locks When IOCB_CMD_POLL is used on a userfaultfd, aio_poll() disables IRQs and takes kioctx::ctx_lock, then userfaultfd_ctx::fd_wqh.lock. This may have to wait for userfaultfd_ctx::fd_wqh.lock to be released by userfaultfd_ctx_read(), which in turn can be waiting for userfaultfd_ctx::fault_pending_wqh.lock or userfaultfd_ctx::event_wqh.lock. But elsewhere the fault_pending_wqh and event_wqh locks are taken with IRQs enabled. Since the IRQ handler may take kioctx::ctx_lock, lockdep reports that a deadlock is possible. Fix it by always disabling IRQs when taking the fault_pending_wqh and event_wqh locks. Commit ae62c16e105a ("userfaultfd: disable irqs when taking the waitqueue lock") didn't fix this because it only accounted for the fd_wqh lock, not the other locks nested inside it. Link: http://lkml.kernel.org/r/20190627075004.21259-1-ebiggers@kernel.org Fixes: bfe4037e722e ("aio: implement IOCB_CMD_POLL") Signed-off-by: Eric Biggers <ebiggers@google.com> Reported-by: syzbot+fab6de82892b6b9c6191@syzkaller.appspotmail.com Reported-by: syzbot+53c0b767f7ca0dc0c451@syzkaller.appspotmail.com Reported-by: syzbot+a3accb352f9c22041cfa@syzkaller.appspotmail.com Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> [4.19+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-05 01:14:39 +03:00
spin_unlock_irq(&ctx->fault_pending_wqh.lock);
/* Flush pending events that may still wait on event_wqh */
wake_up_all(&ctx->event_wqh);
wake_up_poll(&ctx->fd_wqh, EPOLLHUP);
userfaultfd_ctx_put(ctx);
return 0;
}
/* fault_pending_wqh.lock must be hold by the caller */
static inline struct userfaultfd_wait_queue *find_userfault_in(
wait_queue_head_t *wqh)
{
wait_queue_entry_t *wq;
struct userfaultfd_wait_queue *uwq;
lockdep_assert_held(&wqh->lock);
uwq = NULL;
if (!waitqueue_active(wqh))
goto out;
/* walk in reverse to provide FIFO behavior to read userfaults */
sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list naming So I've noticed a number of instances where it was not obvious from the code whether ->task_list was for a wait-queue head or a wait-queue entry. Furthermore, there's a number of wait-queue users where the lists are not for 'tasks' but other entities (poll tables, etc.), in which case the 'task_list' name is actively confusing. To clear this all up, name the wait-queue head and entry list structure fields unambiguously: struct wait_queue_head::task_list => ::head struct wait_queue_entry::task_list => ::entry For example, this code: rqw->wait.task_list.next != &wait->task_list ... is was pretty unclear (to me) what it's doing, while now it's written this way: rqw->wait.head.next != &wait->entry ... which makes it pretty clear that we are iterating a list until we see the head. Other examples are: list_for_each_entry_safe(pos, next, &x->task_list, task_list) { list_for_each_entry(wq, &fence->wait.task_list, task_list) { ... where it's unclear (to me) what we are iterating, and during review it's hard to tell whether it's trying to walk a wait-queue entry (which would be a bug), while now it's written as: list_for_each_entry_safe(pos, next, &x->head, entry) { list_for_each_entry(wq, &fence->wait.head, entry) { Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20 13:06:46 +03:00
wq = list_last_entry(&wqh->head, typeof(*wq), entry);
uwq = container_of(wq, struct userfaultfd_wait_queue, wq);
out:
return uwq;
}
static inline struct userfaultfd_wait_queue *find_userfault(
struct userfaultfd_ctx *ctx)
{
return find_userfault_in(&ctx->fault_pending_wqh);
}
static inline struct userfaultfd_wait_queue *find_userfault_evt(
struct userfaultfd_ctx *ctx)
{
return find_userfault_in(&ctx->event_wqh);
}
static __poll_t userfaultfd_poll(struct file *file, poll_table *wait)
{
struct userfaultfd_ctx *ctx = file->private_data;
__poll_t ret;
poll_wait(file, &ctx->fd_wqh, wait);
if (!userfaultfd_is_initialized(ctx))
return EPOLLERR;
/*
* poll() never guarantees that read won't block.
* userfaults can be waken before they're read().
*/
if (unlikely(!(file->f_flags & O_NONBLOCK)))
return EPOLLERR;
/*
* lockless access to see if there are pending faults
* __pollwait last action is the add_wait_queue but
* the spin_unlock would allow the waitqueue_active to
* pass above the actual list_add inside
* add_wait_queue critical section. So use a full
* memory barrier to serialize the list_add write of
* add_wait_queue() with the waitqueue_active read
* below.
*/
ret = 0;
smp_mb();
if (waitqueue_active(&ctx->fault_pending_wqh))
ret = EPOLLIN;
else if (waitqueue_active(&ctx->event_wqh))
ret = EPOLLIN;
return ret;
}
2017-02-23 02:42:27 +03:00
static const struct file_operations userfaultfd_fops;
static int resolve_userfault_fork(struct userfaultfd_ctx *new,
struct inode *inode,
2017-02-23 02:42:27 +03:00
struct uffd_msg *msg)
{
int fd;
fd = anon_inode_getfd_secure("[userfaultfd]", &userfaultfd_fops, new,
O_RDWR | (new->flags & UFFD_SHARED_FCNTL_FLAGS), inode);
2017-02-23 02:42:27 +03:00
if (fd < 0)
return fd;
msg->arg.reserved.reserved1 = 0;
msg->arg.fork.ufd = fd;
return 0;
}
static ssize_t userfaultfd_ctx_read(struct userfaultfd_ctx *ctx, int no_wait,
struct uffd_msg *msg, struct inode *inode)
{
ssize_t ret;
DECLARE_WAITQUEUE(wait, current);
struct userfaultfd_wait_queue *uwq;
2017-02-23 02:42:27 +03:00
/*
* Handling fork event requires sleeping operations, so
* we drop the event_wqh lock, then do these ops, then
* lock it back and wake up the waiter. While the lock is
* dropped the ewq may go away so we keep track of it
* carefully.
*/
LIST_HEAD(fork_event);
struct userfaultfd_ctx *fork_nctx = NULL;
/* always take the fd_wqh lock before the fault_pending_wqh lock */
spin_lock_irq(&ctx->fd_wqh.lock);
__add_wait_queue(&ctx->fd_wqh, &wait);
for (;;) {
set_current_state(TASK_INTERRUPTIBLE);
spin_lock(&ctx->fault_pending_wqh.lock);
uwq = find_userfault(ctx);
if (uwq) {
/*
* Use a seqcount to repeat the lockless check
* in wake_userfault() to avoid missing
* wakeups because during the refile both
* waitqueue could become empty if this is the
* only userfault.
*/
write_seqcount_begin(&ctx->refile_seq);
/*
* The fault_pending_wqh.lock prevents the uwq
* to disappear from under us.
*
* Refile this userfault from
* fault_pending_wqh to fault_wqh, it's not
* pending anymore after we read it.
*
* Use list_del() by hand (as
* userfaultfd_wake_function also uses
* list_del_init() by hand) to be sure nobody
* changes __remove_wait_queue() to use
* list_del_init() in turn breaking the
* !list_empty_careful() check in
sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list naming So I've noticed a number of instances where it was not obvious from the code whether ->task_list was for a wait-queue head or a wait-queue entry. Furthermore, there's a number of wait-queue users where the lists are not for 'tasks' but other entities (poll tables, etc.), in which case the 'task_list' name is actively confusing. To clear this all up, name the wait-queue head and entry list structure fields unambiguously: struct wait_queue_head::task_list => ::head struct wait_queue_entry::task_list => ::entry For example, this code: rqw->wait.task_list.next != &wait->task_list ... is was pretty unclear (to me) what it's doing, while now it's written this way: rqw->wait.head.next != &wait->entry ... which makes it pretty clear that we are iterating a list until we see the head. Other examples are: list_for_each_entry_safe(pos, next, &x->task_list, task_list) { list_for_each_entry(wq, &fence->wait.task_list, task_list) { ... where it's unclear (to me) what we are iterating, and during review it's hard to tell whether it's trying to walk a wait-queue entry (which would be a bug), while now it's written as: list_for_each_entry_safe(pos, next, &x->head, entry) { list_for_each_entry(wq, &fence->wait.head, entry) { Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20 13:06:46 +03:00
* handle_userfault(). The uwq->wq.head list
* must never be empty at any time during the
* refile, or the waitqueue could disappear
* from under us. The "wait_queue_head_t"
* parameter of __remove_wait_queue() is unused
* anyway.
*/
sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list naming So I've noticed a number of instances where it was not obvious from the code whether ->task_list was for a wait-queue head or a wait-queue entry. Furthermore, there's a number of wait-queue users where the lists are not for 'tasks' but other entities (poll tables, etc.), in which case the 'task_list' name is actively confusing. To clear this all up, name the wait-queue head and entry list structure fields unambiguously: struct wait_queue_head::task_list => ::head struct wait_queue_entry::task_list => ::entry For example, this code: rqw->wait.task_list.next != &wait->task_list ... is was pretty unclear (to me) what it's doing, while now it's written this way: rqw->wait.head.next != &wait->entry ... which makes it pretty clear that we are iterating a list until we see the head. Other examples are: list_for_each_entry_safe(pos, next, &x->task_list, task_list) { list_for_each_entry(wq, &fence->wait.task_list, task_list) { ... where it's unclear (to me) what we are iterating, and during review it's hard to tell whether it's trying to walk a wait-queue entry (which would be a bug), while now it's written as: list_for_each_entry_safe(pos, next, &x->head, entry) { list_for_each_entry(wq, &fence->wait.head, entry) { Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20 13:06:46 +03:00
list_del(&uwq->wq.entry);
add_wait_queue(&ctx->fault_wqh, &uwq->wq);
write_seqcount_end(&ctx->refile_seq);
userfaultfd: change the read API to return a uffd_msg I had requests to return the full address (not the page aligned one) to userland. It's not entirely clear how the page offset could be relevant because userfaults aren't like SIGBUS that can sigjump to a different place and it actually skip resolving the fault depending on a page offset. There's currently no real way to skip the fault especially because after a UFFDIO_COPY|ZEROPAGE, the fault is optimized to be retried within the kernel without having to return to userland first (not even self modifying code replacing the .text that touched the faulting address would prevent the fault to be repeated). Userland cannot skip repeating the fault even more so if the fault was triggered by a KVM secondary page fault or any get_user_pages or any copy-user inside some syscall which will return to kernel code. The second time FAULT_FLAG_RETRY_NOWAIT won't be set leading to a SIGBUS being raised because the userfault can't wait if it cannot release the mmap_map first (and FAULT_FLAG_RETRY_NOWAIT is required for that). Still returning userland a proper structure during the read() on the uffd, can allow to use the current UFFD_API for the future non-cooperative extensions too and it looks cleaner as well. Once we get additional fields there's no point to return the fault address page aligned anymore to reuse the bits below PAGE_SHIFT. The only downside is that the read() syscall will read 32bytes instead of 8bytes but that's not going to be measurable overhead. The total number of new events that can be extended or of new future bits for already shipped events, is limited to 64 by the features field of the uffdio_api structure. If more will be needed a bump of UFFD_API will be required. [akpm@linux-foundation.org: use __packed] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:37 +03:00
/* careful to always initialize msg if ret == 0 */
*msg = uwq->msg;
spin_unlock(&ctx->fault_pending_wqh.lock);
ret = 0;
break;
}
spin_unlock(&ctx->fault_pending_wqh.lock);
spin_lock(&ctx->event_wqh.lock);
uwq = find_userfault_evt(ctx);
if (uwq) {
*msg = uwq->msg;
2017-02-23 02:42:27 +03:00
if (uwq->msg.event == UFFD_EVENT_FORK) {
fork_nctx = (struct userfaultfd_ctx *)
(unsigned long)
uwq->msg.arg.reserved.reserved1;
sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list naming So I've noticed a number of instances where it was not obvious from the code whether ->task_list was for a wait-queue head or a wait-queue entry. Furthermore, there's a number of wait-queue users where the lists are not for 'tasks' but other entities (poll tables, etc.), in which case the 'task_list' name is actively confusing. To clear this all up, name the wait-queue head and entry list structure fields unambiguously: struct wait_queue_head::task_list => ::head struct wait_queue_entry::task_list => ::entry For example, this code: rqw->wait.task_list.next != &wait->task_list ... is was pretty unclear (to me) what it's doing, while now it's written this way: rqw->wait.head.next != &wait->entry ... which makes it pretty clear that we are iterating a list until we see the head. Other examples are: list_for_each_entry_safe(pos, next, &x->task_list, task_list) { list_for_each_entry(wq, &fence->wait.task_list, task_list) { ... where it's unclear (to me) what we are iterating, and during review it's hard to tell whether it's trying to walk a wait-queue entry (which would be a bug), while now it's written as: list_for_each_entry_safe(pos, next, &x->head, entry) { list_for_each_entry(wq, &fence->wait.head, entry) { Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20 13:06:46 +03:00
list_move(&uwq->wq.entry, &fork_event);
userfaultfd: non-cooperative: fix fork use after free When reading the event from the uffd, we put it on a temporary fork_event list to detect if we can still access it after releasing and retaking the event_wqh.lock. If fork aborts and removes the event from the fork_event all is fine as long as we're still in the userfault read context and fork_event head is still alive. We've to put the event allocated in the fork kernel stack, back from fork_event list-head to the event_wqh head, before returning from userfaultfd_ctx_read, because the fork_event head lifetime is limited to the userfaultfd_ctx_read stack lifetime. Forgetting to move the event back to its event_wqh place then results in __remove_wait_queue(&ctx->event_wqh, &ewq->wq); in userfaultfd_event_wait_completion to remove it from a head that has been already freed from the reader stack. This could only happen if resolve_userfault_fork failed (for example if there are no file descriptors available to allocate the fork uffd). If it succeeded it was put back correctly. Furthermore, after find_userfault_evt receives a fork event, the forked userfault context in fork_nctx and uwq->msg.arg.reserved.reserved1 can be released by the fork thread as soon as the event_wqh.lock is released. Taking a reference on the fork_nctx before dropping the lock prevents an use after free in resolve_userfault_fork(). If the fork side aborted and it already released everything, we still try to succeed resolve_userfault_fork(), if possible. Fixes: 893e26e61d04eac9 ("userfaultfd: non-cooperative: Add fork() event") Link: http://lkml.kernel.org/r/20170920180413.26713-1-aarcange@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reported-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-04 02:15:38 +03:00
/*
* fork_nctx can be freed as soon as
* we drop the lock, unless we take a
* reference on it.
*/
userfaultfd_ctx_get(fork_nctx);
2017-02-23 02:42:27 +03:00
spin_unlock(&ctx->event_wqh.lock);
ret = 0;
break;
}
userfaultfd_event_complete(ctx, uwq);
spin_unlock(&ctx->event_wqh.lock);
ret = 0;
break;
}
spin_unlock(&ctx->event_wqh.lock);
if (signal_pending(current)) {
ret = -ERESTARTSYS;
break;
}
if (no_wait) {
ret = -EAGAIN;
break;
}
spin_unlock_irq(&ctx->fd_wqh.lock);
schedule();
spin_lock_irq(&ctx->fd_wqh.lock);
}
__remove_wait_queue(&ctx->fd_wqh, &wait);
__set_current_state(TASK_RUNNING);
spin_unlock_irq(&ctx->fd_wqh.lock);
2017-02-23 02:42:27 +03:00
if (!ret && msg->event == UFFD_EVENT_FORK) {
ret = resolve_userfault_fork(fork_nctx, inode, msg);
fs/userfaultfd.c: disable irqs for fault_pending and event locks When IOCB_CMD_POLL is used on a userfaultfd, aio_poll() disables IRQs and takes kioctx::ctx_lock, then userfaultfd_ctx::fd_wqh.lock. This may have to wait for userfaultfd_ctx::fd_wqh.lock to be released by userfaultfd_ctx_read(), which in turn can be waiting for userfaultfd_ctx::fault_pending_wqh.lock or userfaultfd_ctx::event_wqh.lock. But elsewhere the fault_pending_wqh and event_wqh locks are taken with IRQs enabled. Since the IRQ handler may take kioctx::ctx_lock, lockdep reports that a deadlock is possible. Fix it by always disabling IRQs when taking the fault_pending_wqh and event_wqh locks. Commit ae62c16e105a ("userfaultfd: disable irqs when taking the waitqueue lock") didn't fix this because it only accounted for the fd_wqh lock, not the other locks nested inside it. Link: http://lkml.kernel.org/r/20190627075004.21259-1-ebiggers@kernel.org Fixes: bfe4037e722e ("aio: implement IOCB_CMD_POLL") Signed-off-by: Eric Biggers <ebiggers@google.com> Reported-by: syzbot+fab6de82892b6b9c6191@syzkaller.appspotmail.com Reported-by: syzbot+53c0b767f7ca0dc0c451@syzkaller.appspotmail.com Reported-by: syzbot+a3accb352f9c22041cfa@syzkaller.appspotmail.com Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> [4.19+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-05 01:14:39 +03:00
spin_lock_irq(&ctx->event_wqh.lock);
userfaultfd: non-cooperative: fix fork use after free When reading the event from the uffd, we put it on a temporary fork_event list to detect if we can still access it after releasing and retaking the event_wqh.lock. If fork aborts and removes the event from the fork_event all is fine as long as we're still in the userfault read context and fork_event head is still alive. We've to put the event allocated in the fork kernel stack, back from fork_event list-head to the event_wqh head, before returning from userfaultfd_ctx_read, because the fork_event head lifetime is limited to the userfaultfd_ctx_read stack lifetime. Forgetting to move the event back to its event_wqh place then results in __remove_wait_queue(&ctx->event_wqh, &ewq->wq); in userfaultfd_event_wait_completion to remove it from a head that has been already freed from the reader stack. This could only happen if resolve_userfault_fork failed (for example if there are no file descriptors available to allocate the fork uffd). If it succeeded it was put back correctly. Furthermore, after find_userfault_evt receives a fork event, the forked userfault context in fork_nctx and uwq->msg.arg.reserved.reserved1 can be released by the fork thread as soon as the event_wqh.lock is released. Taking a reference on the fork_nctx before dropping the lock prevents an use after free in resolve_userfault_fork(). If the fork side aborted and it already released everything, we still try to succeed resolve_userfault_fork(), if possible. Fixes: 893e26e61d04eac9 ("userfaultfd: non-cooperative: Add fork() event") Link: http://lkml.kernel.org/r/20170920180413.26713-1-aarcange@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reported-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-04 02:15:38 +03:00
if (!list_empty(&fork_event)) {
/*
* The fork thread didn't abort, so we can
* drop the temporary refcount.
*/
userfaultfd_ctx_put(fork_nctx);
uwq = list_first_entry(&fork_event,
typeof(*uwq),
wq.entry);
/*
* If fork_event list wasn't empty and in turn
* the event wasn't already released by fork
* (the event is allocated on fork kernel
* stack), put the event back to its place in
* the event_wq. fork_event head will be freed
* as soon as we return so the event cannot
* stay queued there no matter the current
* "ret" value.
*/
list_del(&uwq->wq.entry);
__add_wait_queue(&ctx->event_wqh, &uwq->wq);
2017-02-23 02:42:27 +03:00
userfaultfd: non-cooperative: fix fork use after free When reading the event from the uffd, we put it on a temporary fork_event list to detect if we can still access it after releasing and retaking the event_wqh.lock. If fork aborts and removes the event from the fork_event all is fine as long as we're still in the userfault read context and fork_event head is still alive. We've to put the event allocated in the fork kernel stack, back from fork_event list-head to the event_wqh head, before returning from userfaultfd_ctx_read, because the fork_event head lifetime is limited to the userfaultfd_ctx_read stack lifetime. Forgetting to move the event back to its event_wqh place then results in __remove_wait_queue(&ctx->event_wqh, &ewq->wq); in userfaultfd_event_wait_completion to remove it from a head that has been already freed from the reader stack. This could only happen if resolve_userfault_fork failed (for example if there are no file descriptors available to allocate the fork uffd). If it succeeded it was put back correctly. Furthermore, after find_userfault_evt receives a fork event, the forked userfault context in fork_nctx and uwq->msg.arg.reserved.reserved1 can be released by the fork thread as soon as the event_wqh.lock is released. Taking a reference on the fork_nctx before dropping the lock prevents an use after free in resolve_userfault_fork(). If the fork side aborted and it already released everything, we still try to succeed resolve_userfault_fork(), if possible. Fixes: 893e26e61d04eac9 ("userfaultfd: non-cooperative: Add fork() event") Link: http://lkml.kernel.org/r/20170920180413.26713-1-aarcange@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reported-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-04 02:15:38 +03:00
/*
* Leave the event in the waitqueue and report
* error to userland if we failed to resolve
* the userfault fork.
*/
if (likely(!ret))
2017-02-23 02:42:27 +03:00
userfaultfd_event_complete(ctx, uwq);
userfaultfd: non-cooperative: fix fork use after free When reading the event from the uffd, we put it on a temporary fork_event list to detect if we can still access it after releasing and retaking the event_wqh.lock. If fork aborts and removes the event from the fork_event all is fine as long as we're still in the userfault read context and fork_event head is still alive. We've to put the event allocated in the fork kernel stack, back from fork_event list-head to the event_wqh head, before returning from userfaultfd_ctx_read, because the fork_event head lifetime is limited to the userfaultfd_ctx_read stack lifetime. Forgetting to move the event back to its event_wqh place then results in __remove_wait_queue(&ctx->event_wqh, &ewq->wq); in userfaultfd_event_wait_completion to remove it from a head that has been already freed from the reader stack. This could only happen if resolve_userfault_fork failed (for example if there are no file descriptors available to allocate the fork uffd). If it succeeded it was put back correctly. Furthermore, after find_userfault_evt receives a fork event, the forked userfault context in fork_nctx and uwq->msg.arg.reserved.reserved1 can be released by the fork thread as soon as the event_wqh.lock is released. Taking a reference on the fork_nctx before dropping the lock prevents an use after free in resolve_userfault_fork(). If the fork side aborted and it already released everything, we still try to succeed resolve_userfault_fork(), if possible. Fixes: 893e26e61d04eac9 ("userfaultfd: non-cooperative: Add fork() event") Link: http://lkml.kernel.org/r/20170920180413.26713-1-aarcange@redhat.com Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reported-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-10-04 02:15:38 +03:00
} else {
/*
* Here the fork thread aborted and the
* refcount from the fork thread on fork_nctx
* has already been released. We still hold
* the reference we took before releasing the
* lock above. If resolve_userfault_fork
* failed we've to drop it because the
* fork_nctx has to be freed in such case. If
* it succeeded we'll hold it because the new
* uffd references it.
*/
if (ret)
userfaultfd_ctx_put(fork_nctx);
2017-02-23 02:42:27 +03:00
}
fs/userfaultfd.c: disable irqs for fault_pending and event locks When IOCB_CMD_POLL is used on a userfaultfd, aio_poll() disables IRQs and takes kioctx::ctx_lock, then userfaultfd_ctx::fd_wqh.lock. This may have to wait for userfaultfd_ctx::fd_wqh.lock to be released by userfaultfd_ctx_read(), which in turn can be waiting for userfaultfd_ctx::fault_pending_wqh.lock or userfaultfd_ctx::event_wqh.lock. But elsewhere the fault_pending_wqh and event_wqh locks are taken with IRQs enabled. Since the IRQ handler may take kioctx::ctx_lock, lockdep reports that a deadlock is possible. Fix it by always disabling IRQs when taking the fault_pending_wqh and event_wqh locks. Commit ae62c16e105a ("userfaultfd: disable irqs when taking the waitqueue lock") didn't fix this because it only accounted for the fd_wqh lock, not the other locks nested inside it. Link: http://lkml.kernel.org/r/20190627075004.21259-1-ebiggers@kernel.org Fixes: bfe4037e722e ("aio: implement IOCB_CMD_POLL") Signed-off-by: Eric Biggers <ebiggers@google.com> Reported-by: syzbot+fab6de82892b6b9c6191@syzkaller.appspotmail.com Reported-by: syzbot+53c0b767f7ca0dc0c451@syzkaller.appspotmail.com Reported-by: syzbot+a3accb352f9c22041cfa@syzkaller.appspotmail.com Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> [4.19+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-05 01:14:39 +03:00
spin_unlock_irq(&ctx->event_wqh.lock);
2017-02-23 02:42:27 +03:00
}
return ret;
}
static ssize_t userfaultfd_read(struct file *file, char __user *buf,
size_t count, loff_t *ppos)
{
struct userfaultfd_ctx *ctx = file->private_data;
ssize_t _ret, ret = 0;
userfaultfd: change the read API to return a uffd_msg I had requests to return the full address (not the page aligned one) to userland. It's not entirely clear how the page offset could be relevant because userfaults aren't like SIGBUS that can sigjump to a different place and it actually skip resolving the fault depending on a page offset. There's currently no real way to skip the fault especially because after a UFFDIO_COPY|ZEROPAGE, the fault is optimized to be retried within the kernel without having to return to userland first (not even self modifying code replacing the .text that touched the faulting address would prevent the fault to be repeated). Userland cannot skip repeating the fault even more so if the fault was triggered by a KVM secondary page fault or any get_user_pages or any copy-user inside some syscall which will return to kernel code. The second time FAULT_FLAG_RETRY_NOWAIT won't be set leading to a SIGBUS being raised because the userfault can't wait if it cannot release the mmap_map first (and FAULT_FLAG_RETRY_NOWAIT is required for that). Still returning userland a proper structure during the read() on the uffd, can allow to use the current UFFD_API for the future non-cooperative extensions too and it looks cleaner as well. Once we get additional fields there's no point to return the fault address page aligned anymore to reuse the bits below PAGE_SHIFT. The only downside is that the read() syscall will read 32bytes instead of 8bytes but that's not going to be measurable overhead. The total number of new events that can be extended or of new future bits for already shipped events, is limited to 64 by the features field of the uffdio_api structure. If more will be needed a bump of UFFD_API will be required. [akpm@linux-foundation.org: use __packed] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:37 +03:00
struct uffd_msg msg;
int no_wait = file->f_flags & O_NONBLOCK;
struct inode *inode = file_inode(file);
if (!userfaultfd_is_initialized(ctx))
return -EINVAL;
for (;;) {
userfaultfd: change the read API to return a uffd_msg I had requests to return the full address (not the page aligned one) to userland. It's not entirely clear how the page offset could be relevant because userfaults aren't like SIGBUS that can sigjump to a different place and it actually skip resolving the fault depending on a page offset. There's currently no real way to skip the fault especially because after a UFFDIO_COPY|ZEROPAGE, the fault is optimized to be retried within the kernel without having to return to userland first (not even self modifying code replacing the .text that touched the faulting address would prevent the fault to be repeated). Userland cannot skip repeating the fault even more so if the fault was triggered by a KVM secondary page fault or any get_user_pages or any copy-user inside some syscall which will return to kernel code. The second time FAULT_FLAG_RETRY_NOWAIT won't be set leading to a SIGBUS being raised because the userfault can't wait if it cannot release the mmap_map first (and FAULT_FLAG_RETRY_NOWAIT is required for that). Still returning userland a proper structure during the read() on the uffd, can allow to use the current UFFD_API for the future non-cooperative extensions too and it looks cleaner as well. Once we get additional fields there's no point to return the fault address page aligned anymore to reuse the bits below PAGE_SHIFT. The only downside is that the read() syscall will read 32bytes instead of 8bytes but that's not going to be measurable overhead. The total number of new events that can be extended or of new future bits for already shipped events, is limited to 64 by the features field of the uffdio_api structure. If more will be needed a bump of UFFD_API will be required. [akpm@linux-foundation.org: use __packed] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:37 +03:00
if (count < sizeof(msg))
return ret ? ret : -EINVAL;
_ret = userfaultfd_ctx_read(ctx, no_wait, &msg, inode);
if (_ret < 0)
return ret ? ret : _ret;
userfaultfd: change the read API to return a uffd_msg I had requests to return the full address (not the page aligned one) to userland. It's not entirely clear how the page offset could be relevant because userfaults aren't like SIGBUS that can sigjump to a different place and it actually skip resolving the fault depending on a page offset. There's currently no real way to skip the fault especially because after a UFFDIO_COPY|ZEROPAGE, the fault is optimized to be retried within the kernel without having to return to userland first (not even self modifying code replacing the .text that touched the faulting address would prevent the fault to be repeated). Userland cannot skip repeating the fault even more so if the fault was triggered by a KVM secondary page fault or any get_user_pages or any copy-user inside some syscall which will return to kernel code. The second time FAULT_FLAG_RETRY_NOWAIT won't be set leading to a SIGBUS being raised because the userfault can't wait if it cannot release the mmap_map first (and FAULT_FLAG_RETRY_NOWAIT is required for that). Still returning userland a proper structure during the read() on the uffd, can allow to use the current UFFD_API for the future non-cooperative extensions too and it looks cleaner as well. Once we get additional fields there's no point to return the fault address page aligned anymore to reuse the bits below PAGE_SHIFT. The only downside is that the read() syscall will read 32bytes instead of 8bytes but that's not going to be measurable overhead. The total number of new events that can be extended or of new future bits for already shipped events, is limited to 64 by the features field of the uffdio_api structure. If more will be needed a bump of UFFD_API will be required. [akpm@linux-foundation.org: use __packed] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:37 +03:00
if (copy_to_user((__u64 __user *) buf, &msg, sizeof(msg)))
return ret ? ret : -EFAULT;
userfaultfd: change the read API to return a uffd_msg I had requests to return the full address (not the page aligned one) to userland. It's not entirely clear how the page offset could be relevant because userfaults aren't like SIGBUS that can sigjump to a different place and it actually skip resolving the fault depending on a page offset. There's currently no real way to skip the fault especially because after a UFFDIO_COPY|ZEROPAGE, the fault is optimized to be retried within the kernel without having to return to userland first (not even self modifying code replacing the .text that touched the faulting address would prevent the fault to be repeated). Userland cannot skip repeating the fault even more so if the fault was triggered by a KVM secondary page fault or any get_user_pages or any copy-user inside some syscall which will return to kernel code. The second time FAULT_FLAG_RETRY_NOWAIT won't be set leading to a SIGBUS being raised because the userfault can't wait if it cannot release the mmap_map first (and FAULT_FLAG_RETRY_NOWAIT is required for that). Still returning userland a proper structure during the read() on the uffd, can allow to use the current UFFD_API for the future non-cooperative extensions too and it looks cleaner as well. Once we get additional fields there's no point to return the fault address page aligned anymore to reuse the bits below PAGE_SHIFT. The only downside is that the read() syscall will read 32bytes instead of 8bytes but that's not going to be measurable overhead. The total number of new events that can be extended or of new future bits for already shipped events, is limited to 64 by the features field of the uffdio_api structure. If more will be needed a bump of UFFD_API will be required. [akpm@linux-foundation.org: use __packed] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:37 +03:00
ret += sizeof(msg);
buf += sizeof(msg);
count -= sizeof(msg);
/*
* Allow to read more than one fault at time but only
* block if waiting for the very first one.
*/
no_wait = O_NONBLOCK;
}
}
static void __wake_userfault(struct userfaultfd_ctx *ctx,
struct userfaultfd_wake_range *range)
{
fs/userfaultfd.c: disable irqs for fault_pending and event locks When IOCB_CMD_POLL is used on a userfaultfd, aio_poll() disables IRQs and takes kioctx::ctx_lock, then userfaultfd_ctx::fd_wqh.lock. This may have to wait for userfaultfd_ctx::fd_wqh.lock to be released by userfaultfd_ctx_read(), which in turn can be waiting for userfaultfd_ctx::fault_pending_wqh.lock or userfaultfd_ctx::event_wqh.lock. But elsewhere the fault_pending_wqh and event_wqh locks are taken with IRQs enabled. Since the IRQ handler may take kioctx::ctx_lock, lockdep reports that a deadlock is possible. Fix it by always disabling IRQs when taking the fault_pending_wqh and event_wqh locks. Commit ae62c16e105a ("userfaultfd: disable irqs when taking the waitqueue lock") didn't fix this because it only accounted for the fd_wqh lock, not the other locks nested inside it. Link: http://lkml.kernel.org/r/20190627075004.21259-1-ebiggers@kernel.org Fixes: bfe4037e722e ("aio: implement IOCB_CMD_POLL") Signed-off-by: Eric Biggers <ebiggers@google.com> Reported-by: syzbot+fab6de82892b6b9c6191@syzkaller.appspotmail.com Reported-by: syzbot+53c0b767f7ca0dc0c451@syzkaller.appspotmail.com Reported-by: syzbot+a3accb352f9c22041cfa@syzkaller.appspotmail.com Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> [4.19+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-05 01:14:39 +03:00
spin_lock_irq(&ctx->fault_pending_wqh.lock);
/* wake all in the range and autoremove */
if (waitqueue_active(&ctx->fault_pending_wqh))
__wake_up_locked_key(&ctx->fault_pending_wqh, TASK_NORMAL,
range);
if (waitqueue_active(&ctx->fault_wqh))
__wake_up(&ctx->fault_wqh, TASK_NORMAL, 1, range);
fs/userfaultfd.c: disable irqs for fault_pending and event locks When IOCB_CMD_POLL is used on a userfaultfd, aio_poll() disables IRQs and takes kioctx::ctx_lock, then userfaultfd_ctx::fd_wqh.lock. This may have to wait for userfaultfd_ctx::fd_wqh.lock to be released by userfaultfd_ctx_read(), which in turn can be waiting for userfaultfd_ctx::fault_pending_wqh.lock or userfaultfd_ctx::event_wqh.lock. But elsewhere the fault_pending_wqh and event_wqh locks are taken with IRQs enabled. Since the IRQ handler may take kioctx::ctx_lock, lockdep reports that a deadlock is possible. Fix it by always disabling IRQs when taking the fault_pending_wqh and event_wqh locks. Commit ae62c16e105a ("userfaultfd: disable irqs when taking the waitqueue lock") didn't fix this because it only accounted for the fd_wqh lock, not the other locks nested inside it. Link: http://lkml.kernel.org/r/20190627075004.21259-1-ebiggers@kernel.org Fixes: bfe4037e722e ("aio: implement IOCB_CMD_POLL") Signed-off-by: Eric Biggers <ebiggers@google.com> Reported-by: syzbot+fab6de82892b6b9c6191@syzkaller.appspotmail.com Reported-by: syzbot+53c0b767f7ca0dc0c451@syzkaller.appspotmail.com Reported-by: syzbot+a3accb352f9c22041cfa@syzkaller.appspotmail.com Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> [4.19+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-05 01:14:39 +03:00
spin_unlock_irq(&ctx->fault_pending_wqh.lock);
}
static __always_inline void wake_userfault(struct userfaultfd_ctx *ctx,
struct userfaultfd_wake_range *range)
{
unsigned seq;
bool need_wakeup;
/*
* To be sure waitqueue_active() is not reordered by the CPU
* before the pagetable update, use an explicit SMP memory
* barrier here. PT lock release or mmap_read_unlock(mm) still
* have release semantics that can allow the
* waitqueue_active() to be reordered before the pte update.
*/
smp_mb();
/*
* Use waitqueue_active because it's very frequent to
* change the address space atomically even if there are no
* userfaults yet. So we take the spinlock only when we're
* sure we've userfaults to wake.
*/
do {
seq = read_seqcount_begin(&ctx->refile_seq);
need_wakeup = waitqueue_active(&ctx->fault_pending_wqh) ||
waitqueue_active(&ctx->fault_wqh);
cond_resched();
} while (read_seqcount_retry(&ctx->refile_seq, seq));
if (need_wakeup)
__wake_userfault(ctx, range);
}
static __always_inline int validate_range(struct mm_struct *mm,
userfaultfd: do not untag user pointers Patch series "userfaultfd: do not untag user pointers", v5. If a user program uses userfaultfd on ranges of heap memory, it may end up passing a tagged pointer to the kernel in the range.start field of the UFFDIO_REGISTER ioctl. This can happen when using an MTE-capable allocator, or on Android if using the Tagged Pointers feature for MTE readiness [1]. When a fault subsequently occurs, the tag is stripped from the fault address returned to the application in the fault.address field of struct uffd_msg. However, from the application's perspective, the tagged address *is* the memory address, so if the application is unaware of memory tags, it may get confused by receiving an address that is, from its point of view, outside of the bounds of the allocation. We observed this behavior in the kselftest for userfaultfd [2] but other applications could have the same problem. Address this by not untagging pointers passed to the userfaultfd ioctls. Instead, let the system call fail. Also change the kselftest to use mmap so that it doesn't encounter this problem. [1] https://source.android.com/devices/tech/debug/tagged-pointers [2] tools/testing/selftests/vm/userfaultfd.c This patch (of 2): Do not untag pointers passed to the userfaultfd ioctls. Instead, let the system call fail. This will provide an early indication of problems with tag-unaware userspace code instead of letting the code get confused later, and is consistent with how we decided to handle brk/mmap/mremap in commit dcde237319e6 ("mm: Avoid creating virtual address aliases in brk()/mmap()/mremap()"), as well as being consistent with the existing tagged address ABI documentation relating to how ioctl arguments are handled. The code change is a revert of commit 7d0325749a6c ("userfaultfd: untag user pointers") plus some fixups to some additional calls to validate_range that have appeared since then. [1] https://source.android.com/devices/tech/debug/tagged-pointers [2] tools/testing/selftests/vm/userfaultfd.c Link: https://lkml.kernel.org/r/20210714195437.118982-1-pcc@google.com Link: https://lkml.kernel.org/r/20210714195437.118982-2-pcc@google.com Link: https://linux-review.googlesource.com/id/I761aa9f0344454c482b83fcfcce547db0a25501b Fixes: 63f0c6037965 ("arm64: Introduce prctl() options to control the tagged user addresses ABI") Signed-off-by: Peter Collingbourne <pcc@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alistair Delva <adelva@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dave Martin <Dave.Martin@arm.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mitch Phillips <mitchp@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will@kernel.org> Cc: William McVicker <willmcvicker@google.com> Cc: <stable@vger.kernel.org> [5.4] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-24 01:50:01 +03:00
__u64 start, __u64 len)
{
__u64 task_size = mm->task_size;
userfaultfd: do not untag user pointers Patch series "userfaultfd: do not untag user pointers", v5. If a user program uses userfaultfd on ranges of heap memory, it may end up passing a tagged pointer to the kernel in the range.start field of the UFFDIO_REGISTER ioctl. This can happen when using an MTE-capable allocator, or on Android if using the Tagged Pointers feature for MTE readiness [1]. When a fault subsequently occurs, the tag is stripped from the fault address returned to the application in the fault.address field of struct uffd_msg. However, from the application's perspective, the tagged address *is* the memory address, so if the application is unaware of memory tags, it may get confused by receiving an address that is, from its point of view, outside of the bounds of the allocation. We observed this behavior in the kselftest for userfaultfd [2] but other applications could have the same problem. Address this by not untagging pointers passed to the userfaultfd ioctls. Instead, let the system call fail. Also change the kselftest to use mmap so that it doesn't encounter this problem. [1] https://source.android.com/devices/tech/debug/tagged-pointers [2] tools/testing/selftests/vm/userfaultfd.c This patch (of 2): Do not untag pointers passed to the userfaultfd ioctls. Instead, let the system call fail. This will provide an early indication of problems with tag-unaware userspace code instead of letting the code get confused later, and is consistent with how we decided to handle brk/mmap/mremap in commit dcde237319e6 ("mm: Avoid creating virtual address aliases in brk()/mmap()/mremap()"), as well as being consistent with the existing tagged address ABI documentation relating to how ioctl arguments are handled. The code change is a revert of commit 7d0325749a6c ("userfaultfd: untag user pointers") plus some fixups to some additional calls to validate_range that have appeared since then. [1] https://source.android.com/devices/tech/debug/tagged-pointers [2] tools/testing/selftests/vm/userfaultfd.c Link: https://lkml.kernel.org/r/20210714195437.118982-1-pcc@google.com Link: https://lkml.kernel.org/r/20210714195437.118982-2-pcc@google.com Link: https://linux-review.googlesource.com/id/I761aa9f0344454c482b83fcfcce547db0a25501b Fixes: 63f0c6037965 ("arm64: Introduce prctl() options to control the tagged user addresses ABI") Signed-off-by: Peter Collingbourne <pcc@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alistair Delva <adelva@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dave Martin <Dave.Martin@arm.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mitch Phillips <mitchp@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will@kernel.org> Cc: William McVicker <willmcvicker@google.com> Cc: <stable@vger.kernel.org> [5.4] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-24 01:50:01 +03:00
if (start & ~PAGE_MASK)
return -EINVAL;
if (len & ~PAGE_MASK)
return -EINVAL;
if (!len)
return -EINVAL;
userfaultfd: do not untag user pointers Patch series "userfaultfd: do not untag user pointers", v5. If a user program uses userfaultfd on ranges of heap memory, it may end up passing a tagged pointer to the kernel in the range.start field of the UFFDIO_REGISTER ioctl. This can happen when using an MTE-capable allocator, or on Android if using the Tagged Pointers feature for MTE readiness [1]. When a fault subsequently occurs, the tag is stripped from the fault address returned to the application in the fault.address field of struct uffd_msg. However, from the application's perspective, the tagged address *is* the memory address, so if the application is unaware of memory tags, it may get confused by receiving an address that is, from its point of view, outside of the bounds of the allocation. We observed this behavior in the kselftest for userfaultfd [2] but other applications could have the same problem. Address this by not untagging pointers passed to the userfaultfd ioctls. Instead, let the system call fail. Also change the kselftest to use mmap so that it doesn't encounter this problem. [1] https://source.android.com/devices/tech/debug/tagged-pointers [2] tools/testing/selftests/vm/userfaultfd.c This patch (of 2): Do not untag pointers passed to the userfaultfd ioctls. Instead, let the system call fail. This will provide an early indication of problems with tag-unaware userspace code instead of letting the code get confused later, and is consistent with how we decided to handle brk/mmap/mremap in commit dcde237319e6 ("mm: Avoid creating virtual address aliases in brk()/mmap()/mremap()"), as well as being consistent with the existing tagged address ABI documentation relating to how ioctl arguments are handled. The code change is a revert of commit 7d0325749a6c ("userfaultfd: untag user pointers") plus some fixups to some additional calls to validate_range that have appeared since then. [1] https://source.android.com/devices/tech/debug/tagged-pointers [2] tools/testing/selftests/vm/userfaultfd.c Link: https://lkml.kernel.org/r/20210714195437.118982-1-pcc@google.com Link: https://lkml.kernel.org/r/20210714195437.118982-2-pcc@google.com Link: https://linux-review.googlesource.com/id/I761aa9f0344454c482b83fcfcce547db0a25501b Fixes: 63f0c6037965 ("arm64: Introduce prctl() options to control the tagged user addresses ABI") Signed-off-by: Peter Collingbourne <pcc@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alistair Delva <adelva@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dave Martin <Dave.Martin@arm.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mitch Phillips <mitchp@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will@kernel.org> Cc: William McVicker <willmcvicker@google.com> Cc: <stable@vger.kernel.org> [5.4] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-24 01:50:01 +03:00
if (start < mmap_min_addr)
return -EINVAL;
userfaultfd: do not untag user pointers Patch series "userfaultfd: do not untag user pointers", v5. If a user program uses userfaultfd on ranges of heap memory, it may end up passing a tagged pointer to the kernel in the range.start field of the UFFDIO_REGISTER ioctl. This can happen when using an MTE-capable allocator, or on Android if using the Tagged Pointers feature for MTE readiness [1]. When a fault subsequently occurs, the tag is stripped from the fault address returned to the application in the fault.address field of struct uffd_msg. However, from the application's perspective, the tagged address *is* the memory address, so if the application is unaware of memory tags, it may get confused by receiving an address that is, from its point of view, outside of the bounds of the allocation. We observed this behavior in the kselftest for userfaultfd [2] but other applications could have the same problem. Address this by not untagging pointers passed to the userfaultfd ioctls. Instead, let the system call fail. Also change the kselftest to use mmap so that it doesn't encounter this problem. [1] https://source.android.com/devices/tech/debug/tagged-pointers [2] tools/testing/selftests/vm/userfaultfd.c This patch (of 2): Do not untag pointers passed to the userfaultfd ioctls. Instead, let the system call fail. This will provide an early indication of problems with tag-unaware userspace code instead of letting the code get confused later, and is consistent with how we decided to handle brk/mmap/mremap in commit dcde237319e6 ("mm: Avoid creating virtual address aliases in brk()/mmap()/mremap()"), as well as being consistent with the existing tagged address ABI documentation relating to how ioctl arguments are handled. The code change is a revert of commit 7d0325749a6c ("userfaultfd: untag user pointers") plus some fixups to some additional calls to validate_range that have appeared since then. [1] https://source.android.com/devices/tech/debug/tagged-pointers [2] tools/testing/selftests/vm/userfaultfd.c Link: https://lkml.kernel.org/r/20210714195437.118982-1-pcc@google.com Link: https://lkml.kernel.org/r/20210714195437.118982-2-pcc@google.com Link: https://linux-review.googlesource.com/id/I761aa9f0344454c482b83fcfcce547db0a25501b Fixes: 63f0c6037965 ("arm64: Introduce prctl() options to control the tagged user addresses ABI") Signed-off-by: Peter Collingbourne <pcc@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alistair Delva <adelva@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dave Martin <Dave.Martin@arm.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mitch Phillips <mitchp@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will@kernel.org> Cc: William McVicker <willmcvicker@google.com> Cc: <stable@vger.kernel.org> [5.4] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-24 01:50:01 +03:00
if (start >= task_size)
return -EINVAL;
userfaultfd: do not untag user pointers Patch series "userfaultfd: do not untag user pointers", v5. If a user program uses userfaultfd on ranges of heap memory, it may end up passing a tagged pointer to the kernel in the range.start field of the UFFDIO_REGISTER ioctl. This can happen when using an MTE-capable allocator, or on Android if using the Tagged Pointers feature for MTE readiness [1]. When a fault subsequently occurs, the tag is stripped from the fault address returned to the application in the fault.address field of struct uffd_msg. However, from the application's perspective, the tagged address *is* the memory address, so if the application is unaware of memory tags, it may get confused by receiving an address that is, from its point of view, outside of the bounds of the allocation. We observed this behavior in the kselftest for userfaultfd [2] but other applications could have the same problem. Address this by not untagging pointers passed to the userfaultfd ioctls. Instead, let the system call fail. Also change the kselftest to use mmap so that it doesn't encounter this problem. [1] https://source.android.com/devices/tech/debug/tagged-pointers [2] tools/testing/selftests/vm/userfaultfd.c This patch (of 2): Do not untag pointers passed to the userfaultfd ioctls. Instead, let the system call fail. This will provide an early indication of problems with tag-unaware userspace code instead of letting the code get confused later, and is consistent with how we decided to handle brk/mmap/mremap in commit dcde237319e6 ("mm: Avoid creating virtual address aliases in brk()/mmap()/mremap()"), as well as being consistent with the existing tagged address ABI documentation relating to how ioctl arguments are handled. The code change is a revert of commit 7d0325749a6c ("userfaultfd: untag user pointers") plus some fixups to some additional calls to validate_range that have appeared since then. [1] https://source.android.com/devices/tech/debug/tagged-pointers [2] tools/testing/selftests/vm/userfaultfd.c Link: https://lkml.kernel.org/r/20210714195437.118982-1-pcc@google.com Link: https://lkml.kernel.org/r/20210714195437.118982-2-pcc@google.com Link: https://linux-review.googlesource.com/id/I761aa9f0344454c482b83fcfcce547db0a25501b Fixes: 63f0c6037965 ("arm64: Introduce prctl() options to control the tagged user addresses ABI") Signed-off-by: Peter Collingbourne <pcc@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alistair Delva <adelva@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dave Martin <Dave.Martin@arm.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mitch Phillips <mitchp@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will@kernel.org> Cc: William McVicker <willmcvicker@google.com> Cc: <stable@vger.kernel.org> [5.4] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-24 01:50:01 +03:00
if (len > task_size - start)
return -EINVAL;
return 0;
}
static int userfaultfd_register(struct userfaultfd_ctx *ctx,
unsigned long arg)
{
struct mm_struct *mm = ctx->mm;
struct vm_area_struct *vma, *prev, *cur;
int ret;
struct uffdio_register uffdio_register;
struct uffdio_register __user *user_uffdio_register;
unsigned long vm_flags, new_flags;
bool found;
bool basic_ioctls;
unsigned long start, end, vma_end;
user_uffdio_register = (struct uffdio_register __user *) arg;
ret = -EFAULT;
if (copy_from_user(&uffdio_register, user_uffdio_register,
sizeof(uffdio_register)-sizeof(__u64)))
goto out;
ret = -EINVAL;
if (!uffdio_register.mode)
goto out;
userfaultfd: add minor fault registration mode Patch series "userfaultfd: add minor fault handling", v9. Overview ======== This series adds a new userfaultfd feature, UFFD_FEATURE_MINOR_HUGETLBFS. When enabled (via the UFFDIO_API ioctl), this feature means that any hugetlbfs VMAs registered with UFFDIO_REGISTER_MODE_MISSING will *also* get events for "minor" faults. By "minor" fault, I mean the following situation: Let there exist two mappings (i.e., VMAs) to the same page(s) (shared memory). One of the mappings is registered with userfaultfd (in minor mode), and the other is not. Via the non-UFFD mapping, the underlying pages have already been allocated & filled with some contents. The UFFD mapping has not yet been faulted in; when it is touched for the first time, this results in what I'm calling a "minor" fault. As a concrete example, when working with hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing page. We also add a new ioctl to resolve such faults: UFFDIO_CONTINUE. The idea is, userspace resolves the fault by either a) doing nothing if the contents are already correct, or b) updating the underlying contents using the second, non-UFFD mapping (via memcpy/memset or similar, or something fancier like RDMA, or etc...). In either case, userspace issues UFFDIO_CONTINUE to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". Use Case ======== Consider the use case of VM live migration (e.g. under QEMU/KVM): 1. While a VM is still running, we copy the contents of its memory to a target machine. The pages are populated on the target by writing to the non-UFFD mapping, using the setup described above. The VM is still running (and therefore its memory is likely changing), so this may be repeated several times, until we decide the target is "up to date enough". 2. We pause the VM on the source, and start executing on the target machine. During this gap, the VM's user(s) will *see* a pause, so it is desirable to minimize this window. 3. Between the last time any page was copied from the source to the target, and when the VM was paused, the contents of that page may have changed - and therefore the copy we have on the target machine is out of date. Although we can keep track of which pages are out of date, for VMs with large amounts of memory, it is "slow" to transfer this information to the target machine. We want to resume execution before such a transfer would complete. 4. So, the guest begins executing on the target machine. The first time it touches its memory (via the UFFD-registered mapping), userspace wants to intercept this fault. Userspace checks whether or not the page is up to date, and if not, copies the updated page from the source machine, via the non-UFFD mapping. Finally, whether a copy was performed or not, userspace issues a UFFDIO_CONTINUE ioctl to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". We don't have to do all of the final updates on-demand. The userfaultfd manager can, in the background, also copy over updated pages once it receives the map of which pages are up-to-date or not. Interaction with Existing APIs ============================== Because this is a feature, a registered VMA could potentially receive both missing and minor faults. I spent some time thinking through how the existing API interacts with the new feature: UFFDIO_CONTINUE cannot be used to resolve non-minor faults, as it does not allocate a new page. If UFFDIO_CONTINUE is used on a non-minor fault: - For non-shared memory or shmem, -EINVAL is returned. - For hugetlb, -EFAULT is returned. UFFDIO_COPY and UFFDIO_ZEROPAGE cannot be used to resolve minor faults. Without modifications, the existing codepath assumes a new page needs to be allocated. This is okay, since userspace must have a second non-UFFD-registered mapping anyway, thus there isn't much reason to want to use these in any case (just memcpy or memset or similar). - If UFFDIO_COPY is used on a minor fault, -EEXIST is returned. - If UFFDIO_ZEROPAGE is used on a minor fault, -EEXIST is returned (or -EINVAL in the case of hugetlb, as UFFDIO_ZEROPAGE is unsupported in any case). - UFFDIO_WRITEPROTECT simply doesn't work with shared memory, and returns -ENOENT in that case (regardless of the kind of fault). Future Work =========== This series only supports hugetlbfs. I have a second series in flight to support shmem as well, extending the functionality. This series is more mature than the shmem support at this point, and the functionality works fully on hugetlbfs, so this series can be merged first and then shmem support will follow. This patch (of 6): This feature allows userspace to intercept "minor" faults. By "minor" faults, I mean the following situation: Let there exist two mappings (i.e., VMAs) to the same page(s). One of the mappings is registered with userfaultfd (in minor mode), and the other is not. Via the non-UFFD mapping, the underlying pages have already been allocated & filled with some contents. The UFFD mapping has not yet been faulted in; when it is touched for the first time, this results in what I'm calling a "minor" fault. As a concrete example, when working with hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing page. This commit adds the new registration mode, and sets the relevant flag on the VMAs being registered. In the hugetlb fault path, if we find that we have huge_pte_none(), but find_lock_page() does indeed find an existing page, then we have a "minor" fault, and if the VMA has the userfaultfd registration flag, we call into userfaultfd to handle it. This is implemented as a new registration mode, instead of an API feature. This is because the alternative implementation has significant drawbacks [1]. However, doing it this was requires we allocate a VM_* flag for the new registration mode. On 32-bit systems, there are no unused bits, so this feature is only supported on architectures with CONFIG_ARCH_USES_HIGH_VMA_FLAGS. When attempting to register a VMA in MINOR mode on 32-bit architectures, we return -EINVAL. [1] https://lore.kernel.org/patchwork/patch/1380226/ [peterx@redhat.com: fix minor fault page leak] Link: https://lkml.kernel.org/r/20210322175132.36659-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20210301222728.176417-1-axelrasmussen@google.com Link: https://lkml.kernel.org/r/20210301222728.176417-2-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michal Koutn" <mkoutny@suse.com> Cc: Michel Lespinasse <walken@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: Shawn Anastasio <shawn@anastas.io> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Steven Price <steven.price@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Adam Ruprecht <ruprecht@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Cannon Matthews <cannonmatthews@google.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Oliver Upton <oupton@google.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 04:35:36 +03:00
if (uffdio_register.mode & ~UFFD_API_REGISTER_MODES)
goto out;
vm_flags = 0;
if (uffdio_register.mode & UFFDIO_REGISTER_MODE_MISSING)
vm_flags |= VM_UFFD_MISSING;
if (uffdio_register.mode & UFFDIO_REGISTER_MODE_WP) {
#ifndef CONFIG_HAVE_ARCH_USERFAULTFD_WP
goto out;
#endif
vm_flags |= VM_UFFD_WP;
}
userfaultfd: add minor fault registration mode Patch series "userfaultfd: add minor fault handling", v9. Overview ======== This series adds a new userfaultfd feature, UFFD_FEATURE_MINOR_HUGETLBFS. When enabled (via the UFFDIO_API ioctl), this feature means that any hugetlbfs VMAs registered with UFFDIO_REGISTER_MODE_MISSING will *also* get events for "minor" faults. By "minor" fault, I mean the following situation: Let there exist two mappings (i.e., VMAs) to the same page(s) (shared memory). One of the mappings is registered with userfaultfd (in minor mode), and the other is not. Via the non-UFFD mapping, the underlying pages have already been allocated & filled with some contents. The UFFD mapping has not yet been faulted in; when it is touched for the first time, this results in what I'm calling a "minor" fault. As a concrete example, when working with hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing page. We also add a new ioctl to resolve such faults: UFFDIO_CONTINUE. The idea is, userspace resolves the fault by either a) doing nothing if the contents are already correct, or b) updating the underlying contents using the second, non-UFFD mapping (via memcpy/memset or similar, or something fancier like RDMA, or etc...). In either case, userspace issues UFFDIO_CONTINUE to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". Use Case ======== Consider the use case of VM live migration (e.g. under QEMU/KVM): 1. While a VM is still running, we copy the contents of its memory to a target machine. The pages are populated on the target by writing to the non-UFFD mapping, using the setup described above. The VM is still running (and therefore its memory is likely changing), so this may be repeated several times, until we decide the target is "up to date enough". 2. We pause the VM on the source, and start executing on the target machine. During this gap, the VM's user(s) will *see* a pause, so it is desirable to minimize this window. 3. Between the last time any page was copied from the source to the target, and when the VM was paused, the contents of that page may have changed - and therefore the copy we have on the target machine is out of date. Although we can keep track of which pages are out of date, for VMs with large amounts of memory, it is "slow" to transfer this information to the target machine. We want to resume execution before such a transfer would complete. 4. So, the guest begins executing on the target machine. The first time it touches its memory (via the UFFD-registered mapping), userspace wants to intercept this fault. Userspace checks whether or not the page is up to date, and if not, copies the updated page from the source machine, via the non-UFFD mapping. Finally, whether a copy was performed or not, userspace issues a UFFDIO_CONTINUE ioctl to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". We don't have to do all of the final updates on-demand. The userfaultfd manager can, in the background, also copy over updated pages once it receives the map of which pages are up-to-date or not. Interaction with Existing APIs ============================== Because this is a feature, a registered VMA could potentially receive both missing and minor faults. I spent some time thinking through how the existing API interacts with the new feature: UFFDIO_CONTINUE cannot be used to resolve non-minor faults, as it does not allocate a new page. If UFFDIO_CONTINUE is used on a non-minor fault: - For non-shared memory or shmem, -EINVAL is returned. - For hugetlb, -EFAULT is returned. UFFDIO_COPY and UFFDIO_ZEROPAGE cannot be used to resolve minor faults. Without modifications, the existing codepath assumes a new page needs to be allocated. This is okay, since userspace must have a second non-UFFD-registered mapping anyway, thus there isn't much reason to want to use these in any case (just memcpy or memset or similar). - If UFFDIO_COPY is used on a minor fault, -EEXIST is returned. - If UFFDIO_ZEROPAGE is used on a minor fault, -EEXIST is returned (or -EINVAL in the case of hugetlb, as UFFDIO_ZEROPAGE is unsupported in any case). - UFFDIO_WRITEPROTECT simply doesn't work with shared memory, and returns -ENOENT in that case (regardless of the kind of fault). Future Work =========== This series only supports hugetlbfs. I have a second series in flight to support shmem as well, extending the functionality. This series is more mature than the shmem support at this point, and the functionality works fully on hugetlbfs, so this series can be merged first and then shmem support will follow. This patch (of 6): This feature allows userspace to intercept "minor" faults. By "minor" faults, I mean the following situation: Let there exist two mappings (i.e., VMAs) to the same page(s). One of the mappings is registered with userfaultfd (in minor mode), and the other is not. Via the non-UFFD mapping, the underlying pages have already been allocated & filled with some contents. The UFFD mapping has not yet been faulted in; when it is touched for the first time, this results in what I'm calling a "minor" fault. As a concrete example, when working with hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing page. This commit adds the new registration mode, and sets the relevant flag on the VMAs being registered. In the hugetlb fault path, if we find that we have huge_pte_none(), but find_lock_page() does indeed find an existing page, then we have a "minor" fault, and if the VMA has the userfaultfd registration flag, we call into userfaultfd to handle it. This is implemented as a new registration mode, instead of an API feature. This is because the alternative implementation has significant drawbacks [1]. However, doing it this was requires we allocate a VM_* flag for the new registration mode. On 32-bit systems, there are no unused bits, so this feature is only supported on architectures with CONFIG_ARCH_USES_HIGH_VMA_FLAGS. When attempting to register a VMA in MINOR mode on 32-bit architectures, we return -EINVAL. [1] https://lore.kernel.org/patchwork/patch/1380226/ [peterx@redhat.com: fix minor fault page leak] Link: https://lkml.kernel.org/r/20210322175132.36659-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20210301222728.176417-1-axelrasmussen@google.com Link: https://lkml.kernel.org/r/20210301222728.176417-2-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michal Koutn" <mkoutny@suse.com> Cc: Michel Lespinasse <walken@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: Shawn Anastasio <shawn@anastas.io> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Steven Price <steven.price@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Adam Ruprecht <ruprecht@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Cannon Matthews <cannonmatthews@google.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Oliver Upton <oupton@google.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 04:35:36 +03:00
if (uffdio_register.mode & UFFDIO_REGISTER_MODE_MINOR) {
#ifndef CONFIG_HAVE_ARCH_USERFAULTFD_MINOR
goto out;
#endif
vm_flags |= VM_UFFD_MINOR;
}
userfaultfd: do not untag user pointers Patch series "userfaultfd: do not untag user pointers", v5. If a user program uses userfaultfd on ranges of heap memory, it may end up passing a tagged pointer to the kernel in the range.start field of the UFFDIO_REGISTER ioctl. This can happen when using an MTE-capable allocator, or on Android if using the Tagged Pointers feature for MTE readiness [1]. When a fault subsequently occurs, the tag is stripped from the fault address returned to the application in the fault.address field of struct uffd_msg. However, from the application's perspective, the tagged address *is* the memory address, so if the application is unaware of memory tags, it may get confused by receiving an address that is, from its point of view, outside of the bounds of the allocation. We observed this behavior in the kselftest for userfaultfd [2] but other applications could have the same problem. Address this by not untagging pointers passed to the userfaultfd ioctls. Instead, let the system call fail. Also change the kselftest to use mmap so that it doesn't encounter this problem. [1] https://source.android.com/devices/tech/debug/tagged-pointers [2] tools/testing/selftests/vm/userfaultfd.c This patch (of 2): Do not untag pointers passed to the userfaultfd ioctls. Instead, let the system call fail. This will provide an early indication of problems with tag-unaware userspace code instead of letting the code get confused later, and is consistent with how we decided to handle brk/mmap/mremap in commit dcde237319e6 ("mm: Avoid creating virtual address aliases in brk()/mmap()/mremap()"), as well as being consistent with the existing tagged address ABI documentation relating to how ioctl arguments are handled. The code change is a revert of commit 7d0325749a6c ("userfaultfd: untag user pointers") plus some fixups to some additional calls to validate_range that have appeared since then. [1] https://source.android.com/devices/tech/debug/tagged-pointers [2] tools/testing/selftests/vm/userfaultfd.c Link: https://lkml.kernel.org/r/20210714195437.118982-1-pcc@google.com Link: https://lkml.kernel.org/r/20210714195437.118982-2-pcc@google.com Link: https://linux-review.googlesource.com/id/I761aa9f0344454c482b83fcfcce547db0a25501b Fixes: 63f0c6037965 ("arm64: Introduce prctl() options to control the tagged user addresses ABI") Signed-off-by: Peter Collingbourne <pcc@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alistair Delva <adelva@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dave Martin <Dave.Martin@arm.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mitch Phillips <mitchp@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will@kernel.org> Cc: William McVicker <willmcvicker@google.com> Cc: <stable@vger.kernel.org> [5.4] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-24 01:50:01 +03:00
ret = validate_range(mm, uffdio_register.range.start,
uffdio_register.range.len);
if (ret)
goto out;
start = uffdio_register.range.start;
end = start + uffdio_register.range.len;
ret = -ENOMEM;
if (!mmget_not_zero(mm))
goto out;
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 07:33:25 +03:00
mmap_write_lock(mm);
vma = find_vma_prev(mm, start, &prev);
if (!vma)
goto out_unlock;
/* check that there's at least one vma in the range */
ret = -EINVAL;
if (vma->vm_start >= end)
goto out_unlock;
/*
* If the first vma contains huge pages, make sure start address
* is aligned to huge page size.
*/
if (is_vm_hugetlb_page(vma)) {
unsigned long vma_hpagesize = vma_kernel_pagesize(vma);
if (start & (vma_hpagesize - 1))
goto out_unlock;
}
/*
* Search for not compatible vmas.
*/
found = false;
basic_ioctls = false;
for (cur = vma; cur && cur->vm_start < end; cur = cur->vm_next) {
cond_resched();
BUG_ON(!!cur->vm_userfaultfd_ctx.ctx ^
userfaultfd: add minor fault registration mode Patch series "userfaultfd: add minor fault handling", v9. Overview ======== This series adds a new userfaultfd feature, UFFD_FEATURE_MINOR_HUGETLBFS. When enabled (via the UFFDIO_API ioctl), this feature means that any hugetlbfs VMAs registered with UFFDIO_REGISTER_MODE_MISSING will *also* get events for "minor" faults. By "minor" fault, I mean the following situation: Let there exist two mappings (i.e., VMAs) to the same page(s) (shared memory). One of the mappings is registered with userfaultfd (in minor mode), and the other is not. Via the non-UFFD mapping, the underlying pages have already been allocated & filled with some contents. The UFFD mapping has not yet been faulted in; when it is touched for the first time, this results in what I'm calling a "minor" fault. As a concrete example, when working with hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing page. We also add a new ioctl to resolve such faults: UFFDIO_CONTINUE. The idea is, userspace resolves the fault by either a) doing nothing if the contents are already correct, or b) updating the underlying contents using the second, non-UFFD mapping (via memcpy/memset or similar, or something fancier like RDMA, or etc...). In either case, userspace issues UFFDIO_CONTINUE to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". Use Case ======== Consider the use case of VM live migration (e.g. under QEMU/KVM): 1. While a VM is still running, we copy the contents of its memory to a target machine. The pages are populated on the target by writing to the non-UFFD mapping, using the setup described above. The VM is still running (and therefore its memory is likely changing), so this may be repeated several times, until we decide the target is "up to date enough". 2. We pause the VM on the source, and start executing on the target machine. During this gap, the VM's user(s) will *see* a pause, so it is desirable to minimize this window. 3. Between the last time any page was copied from the source to the target, and when the VM was paused, the contents of that page may have changed - and therefore the copy we have on the target machine is out of date. Although we can keep track of which pages are out of date, for VMs with large amounts of memory, it is "slow" to transfer this information to the target machine. We want to resume execution before such a transfer would complete. 4. So, the guest begins executing on the target machine. The first time it touches its memory (via the UFFD-registered mapping), userspace wants to intercept this fault. Userspace checks whether or not the page is up to date, and if not, copies the updated page from the source machine, via the non-UFFD mapping. Finally, whether a copy was performed or not, userspace issues a UFFDIO_CONTINUE ioctl to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". We don't have to do all of the final updates on-demand. The userfaultfd manager can, in the background, also copy over updated pages once it receives the map of which pages are up-to-date or not. Interaction with Existing APIs ============================== Because this is a feature, a registered VMA could potentially receive both missing and minor faults. I spent some time thinking through how the existing API interacts with the new feature: UFFDIO_CONTINUE cannot be used to resolve non-minor faults, as it does not allocate a new page. If UFFDIO_CONTINUE is used on a non-minor fault: - For non-shared memory or shmem, -EINVAL is returned. - For hugetlb, -EFAULT is returned. UFFDIO_COPY and UFFDIO_ZEROPAGE cannot be used to resolve minor faults. Without modifications, the existing codepath assumes a new page needs to be allocated. This is okay, since userspace must have a second non-UFFD-registered mapping anyway, thus there isn't much reason to want to use these in any case (just memcpy or memset or similar). - If UFFDIO_COPY is used on a minor fault, -EEXIST is returned. - If UFFDIO_ZEROPAGE is used on a minor fault, -EEXIST is returned (or -EINVAL in the case of hugetlb, as UFFDIO_ZEROPAGE is unsupported in any case). - UFFDIO_WRITEPROTECT simply doesn't work with shared memory, and returns -ENOENT in that case (regardless of the kind of fault). Future Work =========== This series only supports hugetlbfs. I have a second series in flight to support shmem as well, extending the functionality. This series is more mature than the shmem support at this point, and the functionality works fully on hugetlbfs, so this series can be merged first and then shmem support will follow. This patch (of 6): This feature allows userspace to intercept "minor" faults. By "minor" faults, I mean the following situation: Let there exist two mappings (i.e., VMAs) to the same page(s). One of the mappings is registered with userfaultfd (in minor mode), and the other is not. Via the non-UFFD mapping, the underlying pages have already been allocated & filled with some contents. The UFFD mapping has not yet been faulted in; when it is touched for the first time, this results in what I'm calling a "minor" fault. As a concrete example, when working with hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing page. This commit adds the new registration mode, and sets the relevant flag on the VMAs being registered. In the hugetlb fault path, if we find that we have huge_pte_none(), but find_lock_page() does indeed find an existing page, then we have a "minor" fault, and if the VMA has the userfaultfd registration flag, we call into userfaultfd to handle it. This is implemented as a new registration mode, instead of an API feature. This is because the alternative implementation has significant drawbacks [1]. However, doing it this was requires we allocate a VM_* flag for the new registration mode. On 32-bit systems, there are no unused bits, so this feature is only supported on architectures with CONFIG_ARCH_USES_HIGH_VMA_FLAGS. When attempting to register a VMA in MINOR mode on 32-bit architectures, we return -EINVAL. [1] https://lore.kernel.org/patchwork/patch/1380226/ [peterx@redhat.com: fix minor fault page leak] Link: https://lkml.kernel.org/r/20210322175132.36659-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20210301222728.176417-1-axelrasmussen@google.com Link: https://lkml.kernel.org/r/20210301222728.176417-2-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michal Koutn" <mkoutny@suse.com> Cc: Michel Lespinasse <walken@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: Shawn Anastasio <shawn@anastas.io> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Steven Price <steven.price@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Adam Ruprecht <ruprecht@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Cannon Matthews <cannonmatthews@google.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Oliver Upton <oupton@google.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 04:35:36 +03:00
!!(cur->vm_flags & __VM_UFFD_FLAGS));
/* check not compatible vmas */
ret = -EINVAL;
userfaultfd: wp: add the writeprotect API to userfaultfd ioctl Introduce the new uffd-wp APIs for userspace. Firstly, we'll allow to do UFFDIO_REGISTER with write protection tracking using the new UFFDIO_REGISTER_MODE_WP flag. Note that this flag can co-exist with the existing UFFDIO_REGISTER_MODE_MISSING, in which case the userspace program can not only resolve missing page faults, and at the same time tracking page data changes along the way. Secondly, we introduced the new UFFDIO_WRITEPROTECT API to do page level write protection tracking. Note that we will need to register the memory region with UFFDIO_REGISTER_MODE_WP before that. [peterx@redhat.com: write up the commit message] [peterx@redhat.com: remove useless block, write commit message, check against VM_MAYWRITE rather than VM_WRITE when register] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-14-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 06:06:12 +03:00
if (!vma_can_userfault(cur, vm_flags))
goto out_unlock;
/*
* UFFDIO_COPY will fill file holes even without
* PROT_WRITE. This check enforces that if this is a
* MAP_SHARED, the process has write permission to the backing
* file. If VM_MAYWRITE is set it also enforces that on a
* MAP_SHARED vma: there is no F_WRITE_SEAL and no further
* F_WRITE_SEAL can be taken until the vma is destroyed.
*/
ret = -EPERM;
if (unlikely(!(cur->vm_flags & VM_MAYWRITE)))
goto out_unlock;
/*
* If this vma contains ending address, and huge pages
* check alignment.
*/
if (is_vm_hugetlb_page(cur) && end <= cur->vm_end &&
end > cur->vm_start) {
unsigned long vma_hpagesize = vma_kernel_pagesize(cur);
ret = -EINVAL;
if (end & (vma_hpagesize - 1))
goto out_unlock;
}
userfaultfd: wp: add the writeprotect API to userfaultfd ioctl Introduce the new uffd-wp APIs for userspace. Firstly, we'll allow to do UFFDIO_REGISTER with write protection tracking using the new UFFDIO_REGISTER_MODE_WP flag. Note that this flag can co-exist with the existing UFFDIO_REGISTER_MODE_MISSING, in which case the userspace program can not only resolve missing page faults, and at the same time tracking page data changes along the way. Secondly, we introduced the new UFFDIO_WRITEPROTECT API to do page level write protection tracking. Note that we will need to register the memory region with UFFDIO_REGISTER_MODE_WP before that. [peterx@redhat.com: write up the commit message] [peterx@redhat.com: remove useless block, write commit message, check against VM_MAYWRITE rather than VM_WRITE when register] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-14-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 06:06:12 +03:00
if ((vm_flags & VM_UFFD_WP) && !(cur->vm_flags & VM_MAYWRITE))
goto out_unlock;
/*
* Check that this vma isn't already owned by a
* different userfaultfd. We can't allow more than one
* userfaultfd to own a single vma simultaneously or we
* wouldn't know which one to deliver the userfaults to.
*/
ret = -EBUSY;
if (cur->vm_userfaultfd_ctx.ctx &&
cur->vm_userfaultfd_ctx.ctx != ctx)
goto out_unlock;
/*
* Note vmas containing huge pages
*/
if (is_vm_hugetlb_page(cur))
basic_ioctls = true;
found = true;
}
BUG_ON(!found);
if (vma->vm_start < start)
prev = vma;
ret = 0;
do {
cond_resched();
userfaultfd: wp: add the writeprotect API to userfaultfd ioctl Introduce the new uffd-wp APIs for userspace. Firstly, we'll allow to do UFFDIO_REGISTER with write protection tracking using the new UFFDIO_REGISTER_MODE_WP flag. Note that this flag can co-exist with the existing UFFDIO_REGISTER_MODE_MISSING, in which case the userspace program can not only resolve missing page faults, and at the same time tracking page data changes along the way. Secondly, we introduced the new UFFDIO_WRITEPROTECT API to do page level write protection tracking. Note that we will need to register the memory region with UFFDIO_REGISTER_MODE_WP before that. [peterx@redhat.com: write up the commit message] [peterx@redhat.com: remove useless block, write commit message, check against VM_MAYWRITE rather than VM_WRITE when register] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-14-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 06:06:12 +03:00
BUG_ON(!vma_can_userfault(vma, vm_flags));
BUG_ON(vma->vm_userfaultfd_ctx.ctx &&
vma->vm_userfaultfd_ctx.ctx != ctx);
WARN_ON(!(vma->vm_flags & VM_MAYWRITE));
/*
* Nothing to do: this vma is already registered into this
* userfaultfd and with the right tracking mode too.
*/
if (vma->vm_userfaultfd_ctx.ctx == ctx &&
(vma->vm_flags & vm_flags) == vm_flags)
goto skip;
if (vma->vm_start > start)
start = vma->vm_start;
vma_end = min(end, vma->vm_end);
userfaultfd: add minor fault registration mode Patch series "userfaultfd: add minor fault handling", v9. Overview ======== This series adds a new userfaultfd feature, UFFD_FEATURE_MINOR_HUGETLBFS. When enabled (via the UFFDIO_API ioctl), this feature means that any hugetlbfs VMAs registered with UFFDIO_REGISTER_MODE_MISSING will *also* get events for "minor" faults. By "minor" fault, I mean the following situation: Let there exist two mappings (i.e., VMAs) to the same page(s) (shared memory). One of the mappings is registered with userfaultfd (in minor mode), and the other is not. Via the non-UFFD mapping, the underlying pages have already been allocated & filled with some contents. The UFFD mapping has not yet been faulted in; when it is touched for the first time, this results in what I'm calling a "minor" fault. As a concrete example, when working with hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing page. We also add a new ioctl to resolve such faults: UFFDIO_CONTINUE. The idea is, userspace resolves the fault by either a) doing nothing if the contents are already correct, or b) updating the underlying contents using the second, non-UFFD mapping (via memcpy/memset or similar, or something fancier like RDMA, or etc...). In either case, userspace issues UFFDIO_CONTINUE to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". Use Case ======== Consider the use case of VM live migration (e.g. under QEMU/KVM): 1. While a VM is still running, we copy the contents of its memory to a target machine. The pages are populated on the target by writing to the non-UFFD mapping, using the setup described above. The VM is still running (and therefore its memory is likely changing), so this may be repeated several times, until we decide the target is "up to date enough". 2. We pause the VM on the source, and start executing on the target machine. During this gap, the VM's user(s) will *see* a pause, so it is desirable to minimize this window. 3. Between the last time any page was copied from the source to the target, and when the VM was paused, the contents of that page may have changed - and therefore the copy we have on the target machine is out of date. Although we can keep track of which pages are out of date, for VMs with large amounts of memory, it is "slow" to transfer this information to the target machine. We want to resume execution before such a transfer would complete. 4. So, the guest begins executing on the target machine. The first time it touches its memory (via the UFFD-registered mapping), userspace wants to intercept this fault. Userspace checks whether or not the page is up to date, and if not, copies the updated page from the source machine, via the non-UFFD mapping. Finally, whether a copy was performed or not, userspace issues a UFFDIO_CONTINUE ioctl to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". We don't have to do all of the final updates on-demand. The userfaultfd manager can, in the background, also copy over updated pages once it receives the map of which pages are up-to-date or not. Interaction with Existing APIs ============================== Because this is a feature, a registered VMA could potentially receive both missing and minor faults. I spent some time thinking through how the existing API interacts with the new feature: UFFDIO_CONTINUE cannot be used to resolve non-minor faults, as it does not allocate a new page. If UFFDIO_CONTINUE is used on a non-minor fault: - For non-shared memory or shmem, -EINVAL is returned. - For hugetlb, -EFAULT is returned. UFFDIO_COPY and UFFDIO_ZEROPAGE cannot be used to resolve minor faults. Without modifications, the existing codepath assumes a new page needs to be allocated. This is okay, since userspace must have a second non-UFFD-registered mapping anyway, thus there isn't much reason to want to use these in any case (just memcpy or memset or similar). - If UFFDIO_COPY is used on a minor fault, -EEXIST is returned. - If UFFDIO_ZEROPAGE is used on a minor fault, -EEXIST is returned (or -EINVAL in the case of hugetlb, as UFFDIO_ZEROPAGE is unsupported in any case). - UFFDIO_WRITEPROTECT simply doesn't work with shared memory, and returns -ENOENT in that case (regardless of the kind of fault). Future Work =========== This series only supports hugetlbfs. I have a second series in flight to support shmem as well, extending the functionality. This series is more mature than the shmem support at this point, and the functionality works fully on hugetlbfs, so this series can be merged first and then shmem support will follow. This patch (of 6): This feature allows userspace to intercept "minor" faults. By "minor" faults, I mean the following situation: Let there exist two mappings (i.e., VMAs) to the same page(s). One of the mappings is registered with userfaultfd (in minor mode), and the other is not. Via the non-UFFD mapping, the underlying pages have already been allocated & filled with some contents. The UFFD mapping has not yet been faulted in; when it is touched for the first time, this results in what I'm calling a "minor" fault. As a concrete example, when working with hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing page. This commit adds the new registration mode, and sets the relevant flag on the VMAs being registered. In the hugetlb fault path, if we find that we have huge_pte_none(), but find_lock_page() does indeed find an existing page, then we have a "minor" fault, and if the VMA has the userfaultfd registration flag, we call into userfaultfd to handle it. This is implemented as a new registration mode, instead of an API feature. This is because the alternative implementation has significant drawbacks [1]. However, doing it this was requires we allocate a VM_* flag for the new registration mode. On 32-bit systems, there are no unused bits, so this feature is only supported on architectures with CONFIG_ARCH_USES_HIGH_VMA_FLAGS. When attempting to register a VMA in MINOR mode on 32-bit architectures, we return -EINVAL. [1] https://lore.kernel.org/patchwork/patch/1380226/ [peterx@redhat.com: fix minor fault page leak] Link: https://lkml.kernel.org/r/20210322175132.36659-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20210301222728.176417-1-axelrasmussen@google.com Link: https://lkml.kernel.org/r/20210301222728.176417-2-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michal Koutn" <mkoutny@suse.com> Cc: Michel Lespinasse <walken@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: Shawn Anastasio <shawn@anastas.io> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Steven Price <steven.price@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Adam Ruprecht <ruprecht@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Cannon Matthews <cannonmatthews@google.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Oliver Upton <oupton@google.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 04:35:36 +03:00
new_flags = (vma->vm_flags & ~__VM_UFFD_FLAGS) | vm_flags;
prev = vma_merge(mm, prev, start, vma_end, new_flags,
vma->anon_vma, vma->vm_file, vma->vm_pgoff,
vma_policy(vma),
mm: add a field to store names for private anonymous memory In many userspace applications, and especially in VM based applications like Android uses heavily, there are multiple different allocators in use. At a minimum there is libc malloc and the stack, and in many cases there are libc malloc, the stack, direct syscalls to mmap anonymous memory, and multiple VM heaps (one for small objects, one for big objects, etc.). Each of these layers usually has its own tools to inspect its usage; malloc by compiling a debug version, the VM through heap inspection tools, and for direct syscalls there is usually no way to track them. On Android we heavily use a set of tools that use an extended version of the logic covered in Documentation/vm/pagemap.txt to walk all pages mapped in userspace and slice their usage by process, shared (COW) vs. unique mappings, backing, etc. This can account for real physical memory usage even in cases like fork without exec (which Android uses heavily to share as many private COW pages as possible between processes), Kernel SamePage Merging, and clean zero pages. It produces a measurement of the pages that only exist in that process (USS, for unique), and a measurement of the physical memory usage of that process with the cost of shared pages being evenly split between processes that share them (PSS). If all anonymous memory is indistinguishable then figuring out the real physical memory usage (PSS) of each heap requires either a pagemap walking tool that can understand the heap debugging of every layer, or for every layer's heap debugging tools to implement the pagemap walking logic, in which case it is hard to get a consistent view of memory across the whole system. Tracking the information in userspace leads to all sorts of problems. It either needs to be stored inside the process, which means every process has to have an API to export its current heap information upon request, or it has to be stored externally in a filesystem that somebody needs to clean up on crashes. It needs to be readable while the process is still running, so it has to have some sort of synchronization with every layer of userspace. Efficiently tracking the ranges requires reimplementing something like the kernel vma trees, and linking to it from every layer of userspace. It requires more memory, more syscalls, more runtime cost, and more complexity to separately track regions that the kernel is already tracking. This patch adds a field to /proc/pid/maps and /proc/pid/smaps to show a userspace-provided name for anonymous vmas. The names of named anonymous vmas are shown in /proc/pid/maps and /proc/pid/smaps as [anon:<name>]. Userspace can set the name for a region of memory by calling prctl(PR_SET_VMA, PR_SET_VMA_ANON_NAME, start, len, (unsigned long)name) Setting the name to NULL clears it. The name length limit is 80 bytes including NUL-terminator and is checked to contain only printable ascii characters (including space), except '[',']','\','$' and '`'. Ascii strings are being used to have a descriptive identifiers for vmas, which can be understood by the users reading /proc/pid/maps or /proc/pid/smaps. Names can be standardized for a given system and they can include some variable parts such as the name of the allocator or a library, tid of the thread using it, etc. The name is stored in a pointer in the shared union in vm_area_struct that points to a null terminated string. Anonymous vmas with the same name (equivalent strings) and are otherwise mergeable will be merged. The name pointers are not shared between vmas even if they contain the same name. The name pointer is stored in a union with fields that are only used on file-backed mappings, so it does not increase memory usage. CONFIG_ANON_VMA_NAME kernel configuration is introduced to enable this feature. It keeps the feature disabled by default to prevent any additional memory overhead and to avoid confusing procfs parsers on systems which are not ready to support named anonymous vmas. The patch is based on the original patch developed by Colin Cross, more specifically on its latest version [1] posted upstream by Sumit Semwal. It used a userspace pointer to store vma names. In that design, name pointers could be shared between vmas. However during the last upstreaming attempt, Kees Cook raised concerns [2] about this approach and suggested to copy the name into kernel memory space, perform validity checks [3] and store as a string referenced from vm_area_struct. One big concern is about fork() performance which would need to strdup anonymous vma names. Dave Hansen suggested experimenting with worst-case scenario of forking a process with 64k vmas having longest possible names [4]. I ran this experiment on an ARM64 Android device and recorded a worst-case regression of almost 40% when forking such a process. This regression is addressed in the followup patch which replaces the pointer to a name with a refcounted structure that allows sharing the name pointer between vmas of the same name. Instead of duplicating the string during fork() or when splitting a vma it increments the refcount. [1] https://lore.kernel.org/linux-mm/20200901161459.11772-4-sumit.semwal@linaro.org/ [2] https://lore.kernel.org/linux-mm/202009031031.D32EF57ED@keescook/ [3] https://lore.kernel.org/linux-mm/202009031022.3834F692@keescook/ [4] https://lore.kernel.org/linux-mm/5d0358ab-8c47-2f5f-8e43-23b89d6a8e95@intel.com/ Changes for prctl(2) manual page (in the options section): PR_SET_VMA Sets an attribute specified in arg2 for virtual memory areas starting from the address specified in arg3 and spanning the size specified in arg4. arg5 specifies the value of the attribute to be set. Note that assigning an attribute to a virtual memory area might prevent it from being merged with adjacent virtual memory areas due to the difference in that attribute's value. Currently, arg2 must be one of: PR_SET_VMA_ANON_NAME Set a name for anonymous virtual memory areas. arg5 should be a pointer to a null-terminated string containing the name. The name length including null byte cannot exceed 80 bytes. If arg5 is NULL, the name of the appropriate anonymous virtual memory areas will be reset. The name can contain only printable ascii characters (including space), except '[',']','\','$' and '`'. This feature is available only if the kernel is built with the CONFIG_ANON_VMA_NAME option enabled. [surenb@google.com: docs: proc.rst: /proc/PID/maps: fix malformed table] Link: https://lkml.kernel.org/r/20211123185928.2513763-1-surenb@google.com [surenb: rebased over v5.15-rc6, replaced userpointer with a kernel copy, added input sanitization and CONFIG_ANON_VMA_NAME config. The bulk of the work here was done by Colin Cross, therefore, with his permission, keeping him as the author] Link: https://lkml.kernel.org/r/20211019215511.3771969-2-surenb@google.com Signed-off-by: Colin Cross <ccross@google.com> Signed-off-by: Suren Baghdasaryan <surenb@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: David Rientjes <rientjes@google.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Hugh Dickins <hughd@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jan Glauber <jan.glauber@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Mel Gorman <mgorman@suse.de> Cc: Minchan Kim <minchan@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rob Landley <rob@landley.net> Cc: "Serge E. Hallyn" <serge.hallyn@ubuntu.com> Cc: Shaohua Li <shli@fusionio.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-15 01:05:59 +03:00
((struct vm_userfaultfd_ctx){ ctx }),
2022-03-05 07:28:51 +03:00
anon_vma_name(vma));
if (prev) {
vma = prev;
goto next;
}
if (vma->vm_start < start) {
ret = split_vma(mm, vma, start, 1);
if (ret)
break;
}
if (vma->vm_end > end) {
ret = split_vma(mm, vma, end, 0);
if (ret)
break;
}
next:
/*
* In the vma_merge() successful mprotect-like case 8:
* the next vma was merged into the current one and
* the current one has not been updated yet.
*/
vma->vm_flags = new_flags;
vma->vm_userfaultfd_ctx.ctx = ctx;
hugetlb/userfaultfd: unshare all pmds for hugetlbfs when register wp Huge pmd sharing for hugetlbfs is racy with userfaultfd-wp because userfaultfd-wp is always based on pgtable entries, so they cannot be shared. Walk the hugetlb range and unshare all such mappings if there is, right before UFFDIO_REGISTER will succeed and return to userspace. This will pair with want_pmd_share() in hugetlb code so that huge pmd sharing is completely disabled for userfaultfd-wp registered range. Link: https://lkml.kernel.org/r/20210218231206.15524-1-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Peter Xu <peterx@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Adam Ruprecht <ruprecht@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Cannon Matthews <cannonmatthews@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: David Rientjes <rientjes@google.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michal Koutn" <mkoutny@suse.com> Cc: Michel Lespinasse <walken@google.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oliver Upton <oupton@google.com> Cc: Shaohua Li <shli@fb.com> Cc: Shawn Anastasio <shawn@anastas.io> Cc: Steven Price <steven.price@arm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 04:33:13 +03:00
if (is_vm_hugetlb_page(vma) && uffd_disable_huge_pmd_share(vma))
hugetlb_unshare_all_pmds(vma);
skip:
prev = vma;
start = vma->vm_end;
vma = vma->vm_next;
} while (vma && vma->vm_start < end);
out_unlock:
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 07:33:25 +03:00
mmap_write_unlock(mm);
mmput(mm);
if (!ret) {
__u64 ioctls_out;
ioctls_out = basic_ioctls ? UFFD_API_RANGE_IOCTLS_BASIC :
UFFD_API_RANGE_IOCTLS;
/*
* Declare the WP ioctl only if the WP mode is
* specified and all checks passed with the range
*/
if (!(uffdio_register.mode & UFFDIO_REGISTER_MODE_WP))
ioctls_out &= ~((__u64)1 << _UFFDIO_WRITEPROTECT);
userfaultfd: add UFFDIO_CONTINUE ioctl This ioctl is how userspace ought to resolve "minor" userfaults. The idea is, userspace is notified that a minor fault has occurred. It might change the contents of the page using its second non-UFFD mapping, or not. Then, it calls UFFDIO_CONTINUE to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". Note that it doesn't make much sense to use UFFDIO_{COPY,ZEROPAGE} for MINOR registered VMAs. ZEROPAGE maps the VMA to the zero page; but in the minor fault case, we already have some pre-existing underlying page. Likewise, UFFDIO_COPY isn't useful if we have a second non-UFFD mapping. We'd just use memcpy() or similar instead. It turns out hugetlb_mcopy_atomic_pte() already does very close to what we want, if an existing page is provided via `struct page **pagep`. We already special-case the behavior a bit for the UFFDIO_ZEROPAGE case, so just extend that design: add an enum for the three modes of operation, and make the small adjustments needed for the MCOPY_ATOMIC_CONTINUE case. (Basically, look up the existing page, and avoid adding the existing page to the page cache or calling set_page_huge_active() on it.) Link: https://lkml.kernel.org/r/20210301222728.176417-5-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Reviewed-by: Peter Xu <peterx@redhat.com> Cc: Adam Ruprecht <ruprecht@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Cannon Matthews <cannonmatthews@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: David Rientjes <rientjes@google.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michal Koutn" <mkoutny@suse.com> Cc: Michel Lespinasse <walken@google.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oliver Upton <oupton@google.com> Cc: Shaohua Li <shli@fb.com> Cc: Shawn Anastasio <shawn@anastas.io> Cc: Steven Price <steven.price@arm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 04:35:49 +03:00
/* CONTINUE ioctl is only supported for MINOR ranges. */
if (!(uffdio_register.mode & UFFDIO_REGISTER_MODE_MINOR))
ioctls_out &= ~((__u64)1 << _UFFDIO_CONTINUE);
/*
* Now that we scanned all vmas we can already tell
* userland which ioctls methods are guaranteed to
* succeed on this range.
*/
if (put_user(ioctls_out, &user_uffdio_register->ioctls))
ret = -EFAULT;
}
out:
return ret;
}
static int userfaultfd_unregister(struct userfaultfd_ctx *ctx,
unsigned long arg)
{
struct mm_struct *mm = ctx->mm;
struct vm_area_struct *vma, *prev, *cur;
int ret;
struct uffdio_range uffdio_unregister;
unsigned long new_flags;
bool found;
unsigned long start, end, vma_end;
const void __user *buf = (void __user *)arg;
ret = -EFAULT;
if (copy_from_user(&uffdio_unregister, buf, sizeof(uffdio_unregister)))
goto out;
userfaultfd: do not untag user pointers Patch series "userfaultfd: do not untag user pointers", v5. If a user program uses userfaultfd on ranges of heap memory, it may end up passing a tagged pointer to the kernel in the range.start field of the UFFDIO_REGISTER ioctl. This can happen when using an MTE-capable allocator, or on Android if using the Tagged Pointers feature for MTE readiness [1]. When a fault subsequently occurs, the tag is stripped from the fault address returned to the application in the fault.address field of struct uffd_msg. However, from the application's perspective, the tagged address *is* the memory address, so if the application is unaware of memory tags, it may get confused by receiving an address that is, from its point of view, outside of the bounds of the allocation. We observed this behavior in the kselftest for userfaultfd [2] but other applications could have the same problem. Address this by not untagging pointers passed to the userfaultfd ioctls. Instead, let the system call fail. Also change the kselftest to use mmap so that it doesn't encounter this problem. [1] https://source.android.com/devices/tech/debug/tagged-pointers [2] tools/testing/selftests/vm/userfaultfd.c This patch (of 2): Do not untag pointers passed to the userfaultfd ioctls. Instead, let the system call fail. This will provide an early indication of problems with tag-unaware userspace code instead of letting the code get confused later, and is consistent with how we decided to handle brk/mmap/mremap in commit dcde237319e6 ("mm: Avoid creating virtual address aliases in brk()/mmap()/mremap()"), as well as being consistent with the existing tagged address ABI documentation relating to how ioctl arguments are handled. The code change is a revert of commit 7d0325749a6c ("userfaultfd: untag user pointers") plus some fixups to some additional calls to validate_range that have appeared since then. [1] https://source.android.com/devices/tech/debug/tagged-pointers [2] tools/testing/selftests/vm/userfaultfd.c Link: https://lkml.kernel.org/r/20210714195437.118982-1-pcc@google.com Link: https://lkml.kernel.org/r/20210714195437.118982-2-pcc@google.com Link: https://linux-review.googlesource.com/id/I761aa9f0344454c482b83fcfcce547db0a25501b Fixes: 63f0c6037965 ("arm64: Introduce prctl() options to control the tagged user addresses ABI") Signed-off-by: Peter Collingbourne <pcc@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alistair Delva <adelva@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dave Martin <Dave.Martin@arm.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mitch Phillips <mitchp@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will@kernel.org> Cc: William McVicker <willmcvicker@google.com> Cc: <stable@vger.kernel.org> [5.4] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-24 01:50:01 +03:00
ret = validate_range(mm, uffdio_unregister.start,
uffdio_unregister.len);
if (ret)
goto out;
start = uffdio_unregister.start;
end = start + uffdio_unregister.len;
ret = -ENOMEM;
if (!mmget_not_zero(mm))
goto out;
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 07:33:25 +03:00
mmap_write_lock(mm);
vma = find_vma_prev(mm, start, &prev);
if (!vma)
goto out_unlock;
/* check that there's at least one vma in the range */
ret = -EINVAL;
if (vma->vm_start >= end)
goto out_unlock;
/*
* If the first vma contains huge pages, make sure start address
* is aligned to huge page size.
*/
if (is_vm_hugetlb_page(vma)) {
unsigned long vma_hpagesize = vma_kernel_pagesize(vma);
if (start & (vma_hpagesize - 1))
goto out_unlock;
}
/*
* Search for not compatible vmas.
*/
found = false;
ret = -EINVAL;
for (cur = vma; cur && cur->vm_start < end; cur = cur->vm_next) {
cond_resched();
BUG_ON(!!cur->vm_userfaultfd_ctx.ctx ^
userfaultfd: add minor fault registration mode Patch series "userfaultfd: add minor fault handling", v9. Overview ======== This series adds a new userfaultfd feature, UFFD_FEATURE_MINOR_HUGETLBFS. When enabled (via the UFFDIO_API ioctl), this feature means that any hugetlbfs VMAs registered with UFFDIO_REGISTER_MODE_MISSING will *also* get events for "minor" faults. By "minor" fault, I mean the following situation: Let there exist two mappings (i.e., VMAs) to the same page(s) (shared memory). One of the mappings is registered with userfaultfd (in minor mode), and the other is not. Via the non-UFFD mapping, the underlying pages have already been allocated & filled with some contents. The UFFD mapping has not yet been faulted in; when it is touched for the first time, this results in what I'm calling a "minor" fault. As a concrete example, when working with hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing page. We also add a new ioctl to resolve such faults: UFFDIO_CONTINUE. The idea is, userspace resolves the fault by either a) doing nothing if the contents are already correct, or b) updating the underlying contents using the second, non-UFFD mapping (via memcpy/memset or similar, or something fancier like RDMA, or etc...). In either case, userspace issues UFFDIO_CONTINUE to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". Use Case ======== Consider the use case of VM live migration (e.g. under QEMU/KVM): 1. While a VM is still running, we copy the contents of its memory to a target machine. The pages are populated on the target by writing to the non-UFFD mapping, using the setup described above. The VM is still running (and therefore its memory is likely changing), so this may be repeated several times, until we decide the target is "up to date enough". 2. We pause the VM on the source, and start executing on the target machine. During this gap, the VM's user(s) will *see* a pause, so it is desirable to minimize this window. 3. Between the last time any page was copied from the source to the target, and when the VM was paused, the contents of that page may have changed - and therefore the copy we have on the target machine is out of date. Although we can keep track of which pages are out of date, for VMs with large amounts of memory, it is "slow" to transfer this information to the target machine. We want to resume execution before such a transfer would complete. 4. So, the guest begins executing on the target machine. The first time it touches its memory (via the UFFD-registered mapping), userspace wants to intercept this fault. Userspace checks whether or not the page is up to date, and if not, copies the updated page from the source machine, via the non-UFFD mapping. Finally, whether a copy was performed or not, userspace issues a UFFDIO_CONTINUE ioctl to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". We don't have to do all of the final updates on-demand. The userfaultfd manager can, in the background, also copy over updated pages once it receives the map of which pages are up-to-date or not. Interaction with Existing APIs ============================== Because this is a feature, a registered VMA could potentially receive both missing and minor faults. I spent some time thinking through how the existing API interacts with the new feature: UFFDIO_CONTINUE cannot be used to resolve non-minor faults, as it does not allocate a new page. If UFFDIO_CONTINUE is used on a non-minor fault: - For non-shared memory or shmem, -EINVAL is returned. - For hugetlb, -EFAULT is returned. UFFDIO_COPY and UFFDIO_ZEROPAGE cannot be used to resolve minor faults. Without modifications, the existing codepath assumes a new page needs to be allocated. This is okay, since userspace must have a second non-UFFD-registered mapping anyway, thus there isn't much reason to want to use these in any case (just memcpy or memset or similar). - If UFFDIO_COPY is used on a minor fault, -EEXIST is returned. - If UFFDIO_ZEROPAGE is used on a minor fault, -EEXIST is returned (or -EINVAL in the case of hugetlb, as UFFDIO_ZEROPAGE is unsupported in any case). - UFFDIO_WRITEPROTECT simply doesn't work with shared memory, and returns -ENOENT in that case (regardless of the kind of fault). Future Work =========== This series only supports hugetlbfs. I have a second series in flight to support shmem as well, extending the functionality. This series is more mature than the shmem support at this point, and the functionality works fully on hugetlbfs, so this series can be merged first and then shmem support will follow. This patch (of 6): This feature allows userspace to intercept "minor" faults. By "minor" faults, I mean the following situation: Let there exist two mappings (i.e., VMAs) to the same page(s). One of the mappings is registered with userfaultfd (in minor mode), and the other is not. Via the non-UFFD mapping, the underlying pages have already been allocated & filled with some contents. The UFFD mapping has not yet been faulted in; when it is touched for the first time, this results in what I'm calling a "minor" fault. As a concrete example, when working with hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing page. This commit adds the new registration mode, and sets the relevant flag on the VMAs being registered. In the hugetlb fault path, if we find that we have huge_pte_none(), but find_lock_page() does indeed find an existing page, then we have a "minor" fault, and if the VMA has the userfaultfd registration flag, we call into userfaultfd to handle it. This is implemented as a new registration mode, instead of an API feature. This is because the alternative implementation has significant drawbacks [1]. However, doing it this was requires we allocate a VM_* flag for the new registration mode. On 32-bit systems, there are no unused bits, so this feature is only supported on architectures with CONFIG_ARCH_USES_HIGH_VMA_FLAGS. When attempting to register a VMA in MINOR mode on 32-bit architectures, we return -EINVAL. [1] https://lore.kernel.org/patchwork/patch/1380226/ [peterx@redhat.com: fix minor fault page leak] Link: https://lkml.kernel.org/r/20210322175132.36659-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20210301222728.176417-1-axelrasmussen@google.com Link: https://lkml.kernel.org/r/20210301222728.176417-2-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michal Koutn" <mkoutny@suse.com> Cc: Michel Lespinasse <walken@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: Shawn Anastasio <shawn@anastas.io> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Steven Price <steven.price@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Adam Ruprecht <ruprecht@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Cannon Matthews <cannonmatthews@google.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Oliver Upton <oupton@google.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 04:35:36 +03:00
!!(cur->vm_flags & __VM_UFFD_FLAGS));
/*
* Check not compatible vmas, not strictly required
* here as not compatible vmas cannot have an
* userfaultfd_ctx registered on them, but this
* provides for more strict behavior to notice
* unregistration errors.
*/
userfaultfd: wp: add the writeprotect API to userfaultfd ioctl Introduce the new uffd-wp APIs for userspace. Firstly, we'll allow to do UFFDIO_REGISTER with write protection tracking using the new UFFDIO_REGISTER_MODE_WP flag. Note that this flag can co-exist with the existing UFFDIO_REGISTER_MODE_MISSING, in which case the userspace program can not only resolve missing page faults, and at the same time tracking page data changes along the way. Secondly, we introduced the new UFFDIO_WRITEPROTECT API to do page level write protection tracking. Note that we will need to register the memory region with UFFDIO_REGISTER_MODE_WP before that. [peterx@redhat.com: write up the commit message] [peterx@redhat.com: remove useless block, write commit message, check against VM_MAYWRITE rather than VM_WRITE when register] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-14-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 06:06:12 +03:00
if (!vma_can_userfault(cur, cur->vm_flags))
goto out_unlock;
found = true;
}
BUG_ON(!found);
if (vma->vm_start < start)
prev = vma;
ret = 0;
do {
cond_resched();
userfaultfd: wp: add the writeprotect API to userfaultfd ioctl Introduce the new uffd-wp APIs for userspace. Firstly, we'll allow to do UFFDIO_REGISTER with write protection tracking using the new UFFDIO_REGISTER_MODE_WP flag. Note that this flag can co-exist with the existing UFFDIO_REGISTER_MODE_MISSING, in which case the userspace program can not only resolve missing page faults, and at the same time tracking page data changes along the way. Secondly, we introduced the new UFFDIO_WRITEPROTECT API to do page level write protection tracking. Note that we will need to register the memory region with UFFDIO_REGISTER_MODE_WP before that. [peterx@redhat.com: write up the commit message] [peterx@redhat.com: remove useless block, write commit message, check against VM_MAYWRITE rather than VM_WRITE when register] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-14-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 06:06:12 +03:00
BUG_ON(!vma_can_userfault(vma, vma->vm_flags));
/*
* Nothing to do: this vma is already registered into this
* userfaultfd and with the right tracking mode too.
*/
if (!vma->vm_userfaultfd_ctx.ctx)
goto skip;
WARN_ON(!(vma->vm_flags & VM_MAYWRITE));
if (vma->vm_start > start)
start = vma->vm_start;
vma_end = min(end, vma->vm_end);
if (userfaultfd_missing(vma)) {
/*
* Wake any concurrent pending userfault while
* we unregister, so they will not hang
* permanently and it avoids userland to call
* UFFDIO_WAKE explicitly.
*/
struct userfaultfd_wake_range range;
range.start = start;
range.len = vma_end - start;
wake_userfault(vma->vm_userfaultfd_ctx.ctx, &range);
}
userfaultfd: add minor fault registration mode Patch series "userfaultfd: add minor fault handling", v9. Overview ======== This series adds a new userfaultfd feature, UFFD_FEATURE_MINOR_HUGETLBFS. When enabled (via the UFFDIO_API ioctl), this feature means that any hugetlbfs VMAs registered with UFFDIO_REGISTER_MODE_MISSING will *also* get events for "minor" faults. By "minor" fault, I mean the following situation: Let there exist two mappings (i.e., VMAs) to the same page(s) (shared memory). One of the mappings is registered with userfaultfd (in minor mode), and the other is not. Via the non-UFFD mapping, the underlying pages have already been allocated & filled with some contents. The UFFD mapping has not yet been faulted in; when it is touched for the first time, this results in what I'm calling a "minor" fault. As a concrete example, when working with hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing page. We also add a new ioctl to resolve such faults: UFFDIO_CONTINUE. The idea is, userspace resolves the fault by either a) doing nothing if the contents are already correct, or b) updating the underlying contents using the second, non-UFFD mapping (via memcpy/memset or similar, or something fancier like RDMA, or etc...). In either case, userspace issues UFFDIO_CONTINUE to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". Use Case ======== Consider the use case of VM live migration (e.g. under QEMU/KVM): 1. While a VM is still running, we copy the contents of its memory to a target machine. The pages are populated on the target by writing to the non-UFFD mapping, using the setup described above. The VM is still running (and therefore its memory is likely changing), so this may be repeated several times, until we decide the target is "up to date enough". 2. We pause the VM on the source, and start executing on the target machine. During this gap, the VM's user(s) will *see* a pause, so it is desirable to minimize this window. 3. Between the last time any page was copied from the source to the target, and when the VM was paused, the contents of that page may have changed - and therefore the copy we have on the target machine is out of date. Although we can keep track of which pages are out of date, for VMs with large amounts of memory, it is "slow" to transfer this information to the target machine. We want to resume execution before such a transfer would complete. 4. So, the guest begins executing on the target machine. The first time it touches its memory (via the UFFD-registered mapping), userspace wants to intercept this fault. Userspace checks whether or not the page is up to date, and if not, copies the updated page from the source machine, via the non-UFFD mapping. Finally, whether a copy was performed or not, userspace issues a UFFDIO_CONTINUE ioctl to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". We don't have to do all of the final updates on-demand. The userfaultfd manager can, in the background, also copy over updated pages once it receives the map of which pages are up-to-date or not. Interaction with Existing APIs ============================== Because this is a feature, a registered VMA could potentially receive both missing and minor faults. I spent some time thinking through how the existing API interacts with the new feature: UFFDIO_CONTINUE cannot be used to resolve non-minor faults, as it does not allocate a new page. If UFFDIO_CONTINUE is used on a non-minor fault: - For non-shared memory or shmem, -EINVAL is returned. - For hugetlb, -EFAULT is returned. UFFDIO_COPY and UFFDIO_ZEROPAGE cannot be used to resolve minor faults. Without modifications, the existing codepath assumes a new page needs to be allocated. This is okay, since userspace must have a second non-UFFD-registered mapping anyway, thus there isn't much reason to want to use these in any case (just memcpy or memset or similar). - If UFFDIO_COPY is used on a minor fault, -EEXIST is returned. - If UFFDIO_ZEROPAGE is used on a minor fault, -EEXIST is returned (or -EINVAL in the case of hugetlb, as UFFDIO_ZEROPAGE is unsupported in any case). - UFFDIO_WRITEPROTECT simply doesn't work with shared memory, and returns -ENOENT in that case (regardless of the kind of fault). Future Work =========== This series only supports hugetlbfs. I have a second series in flight to support shmem as well, extending the functionality. This series is more mature than the shmem support at this point, and the functionality works fully on hugetlbfs, so this series can be merged first and then shmem support will follow. This patch (of 6): This feature allows userspace to intercept "minor" faults. By "minor" faults, I mean the following situation: Let there exist two mappings (i.e., VMAs) to the same page(s). One of the mappings is registered with userfaultfd (in minor mode), and the other is not. Via the non-UFFD mapping, the underlying pages have already been allocated & filled with some contents. The UFFD mapping has not yet been faulted in; when it is touched for the first time, this results in what I'm calling a "minor" fault. As a concrete example, when working with hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing page. This commit adds the new registration mode, and sets the relevant flag on the VMAs being registered. In the hugetlb fault path, if we find that we have huge_pte_none(), but find_lock_page() does indeed find an existing page, then we have a "minor" fault, and if the VMA has the userfaultfd registration flag, we call into userfaultfd to handle it. This is implemented as a new registration mode, instead of an API feature. This is because the alternative implementation has significant drawbacks [1]. However, doing it this was requires we allocate a VM_* flag for the new registration mode. On 32-bit systems, there are no unused bits, so this feature is only supported on architectures with CONFIG_ARCH_USES_HIGH_VMA_FLAGS. When attempting to register a VMA in MINOR mode on 32-bit architectures, we return -EINVAL. [1] https://lore.kernel.org/patchwork/patch/1380226/ [peterx@redhat.com: fix minor fault page leak] Link: https://lkml.kernel.org/r/20210322175132.36659-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20210301222728.176417-1-axelrasmussen@google.com Link: https://lkml.kernel.org/r/20210301222728.176417-2-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michal Koutn" <mkoutny@suse.com> Cc: Michel Lespinasse <walken@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: Shawn Anastasio <shawn@anastas.io> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Steven Price <steven.price@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Adam Ruprecht <ruprecht@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Cannon Matthews <cannonmatthews@google.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Oliver Upton <oupton@google.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 04:35:36 +03:00
new_flags = vma->vm_flags & ~__VM_UFFD_FLAGS;
prev = vma_merge(mm, prev, start, vma_end, new_flags,
vma->anon_vma, vma->vm_file, vma->vm_pgoff,
vma_policy(vma),
2022-03-05 07:28:51 +03:00
NULL_VM_UFFD_CTX, anon_vma_name(vma));
if (prev) {
vma = prev;
goto next;
}
if (vma->vm_start < start) {
ret = split_vma(mm, vma, start, 1);
if (ret)
break;
}
if (vma->vm_end > end) {
ret = split_vma(mm, vma, end, 0);
if (ret)
break;
}
next:
/*
* In the vma_merge() successful mprotect-like case 8:
* the next vma was merged into the current one and
* the current one has not been updated yet.
*/
vma->vm_flags = new_flags;
vma->vm_userfaultfd_ctx = NULL_VM_UFFD_CTX;
skip:
prev = vma;
start = vma->vm_end;
vma = vma->vm_next;
} while (vma && vma->vm_start < end);
out_unlock:
mmap locking API: use coccinelle to convert mmap_sem rwsem call sites This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 07:33:25 +03:00
mmap_write_unlock(mm);
mmput(mm);
out:
return ret;
}
/*
userfaultfd: wake pending userfaults This is an optimization but it's a userland visible one and it affects the API. The downside of this optimization is that if you call poll() and you get POLLIN, read(ufd) may still return -EAGAIN. The blocked userfault may be waken by a different thread, before read(ufd) comes around. This in short means that poll() isn't really usable if the userfaultfd is opened in blocking mode. userfaults won't wait in "pending" state to be read anymore and any UFFDIO_WAKE or similar operations that has the objective of waking userfaults after their resolution, will wake all blocked userfaults for the resolved range, including those that haven't been read() by userland yet. The behavior of poll() becomes not standard, but this obviates the need of "spurious" UFFDIO_WAKE and it lets the userland threads to restart immediately without requiring an UFFDIO_WAKE. This is even more significant in case of repeated faults on the same address from multiple threads. This optimization is justified by the measurement that the number of spurious UFFDIO_WAKE accounts for 5% and 10% of the total userfaults for heavy workloads, so it's worth optimizing those away. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:41 +03:00
* userfaultfd_wake may be used in combination with the
* UFFDIO_*_MODE_DONTWAKE to wakeup userfaults in batches.
*/
static int userfaultfd_wake(struct userfaultfd_ctx *ctx,
unsigned long arg)
{
int ret;
struct uffdio_range uffdio_wake;
struct userfaultfd_wake_range range;
const void __user *buf = (void __user *)arg;
ret = -EFAULT;
if (copy_from_user(&uffdio_wake, buf, sizeof(uffdio_wake)))
goto out;
userfaultfd: do not untag user pointers Patch series "userfaultfd: do not untag user pointers", v5. If a user program uses userfaultfd on ranges of heap memory, it may end up passing a tagged pointer to the kernel in the range.start field of the UFFDIO_REGISTER ioctl. This can happen when using an MTE-capable allocator, or on Android if using the Tagged Pointers feature for MTE readiness [1]. When a fault subsequently occurs, the tag is stripped from the fault address returned to the application in the fault.address field of struct uffd_msg. However, from the application's perspective, the tagged address *is* the memory address, so if the application is unaware of memory tags, it may get confused by receiving an address that is, from its point of view, outside of the bounds of the allocation. We observed this behavior in the kselftest for userfaultfd [2] but other applications could have the same problem. Address this by not untagging pointers passed to the userfaultfd ioctls. Instead, let the system call fail. Also change the kselftest to use mmap so that it doesn't encounter this problem. [1] https://source.android.com/devices/tech/debug/tagged-pointers [2] tools/testing/selftests/vm/userfaultfd.c This patch (of 2): Do not untag pointers passed to the userfaultfd ioctls. Instead, let the system call fail. This will provide an early indication of problems with tag-unaware userspace code instead of letting the code get confused later, and is consistent with how we decided to handle brk/mmap/mremap in commit dcde237319e6 ("mm: Avoid creating virtual address aliases in brk()/mmap()/mremap()"), as well as being consistent with the existing tagged address ABI documentation relating to how ioctl arguments are handled. The code change is a revert of commit 7d0325749a6c ("userfaultfd: untag user pointers") plus some fixups to some additional calls to validate_range that have appeared since then. [1] https://source.android.com/devices/tech/debug/tagged-pointers [2] tools/testing/selftests/vm/userfaultfd.c Link: https://lkml.kernel.org/r/20210714195437.118982-1-pcc@google.com Link: https://lkml.kernel.org/r/20210714195437.118982-2-pcc@google.com Link: https://linux-review.googlesource.com/id/I761aa9f0344454c482b83fcfcce547db0a25501b Fixes: 63f0c6037965 ("arm64: Introduce prctl() options to control the tagged user addresses ABI") Signed-off-by: Peter Collingbourne <pcc@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alistair Delva <adelva@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dave Martin <Dave.Martin@arm.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mitch Phillips <mitchp@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will@kernel.org> Cc: William McVicker <willmcvicker@google.com> Cc: <stable@vger.kernel.org> [5.4] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-24 01:50:01 +03:00
ret = validate_range(ctx->mm, uffdio_wake.start, uffdio_wake.len);
if (ret)
goto out;
range.start = uffdio_wake.start;
range.len = uffdio_wake.len;
/*
* len == 0 means wake all and we don't want to wake all here,
* so check it again to be sure.
*/
VM_BUG_ON(!range.len);
wake_userfault(ctx, &range);
ret = 0;
out:
return ret;
}
static int userfaultfd_copy(struct userfaultfd_ctx *ctx,
unsigned long arg)
{
__s64 ret;
struct uffdio_copy uffdio_copy;
struct uffdio_copy __user *user_uffdio_copy;
struct userfaultfd_wake_range range;
user_uffdio_copy = (struct uffdio_copy __user *) arg;
userfaultfd: prevent non-cooperative events vs mcopy_atomic races If a process monitored with userfaultfd changes it's memory mappings or forks() at the same time as uffd monitor fills the process memory with UFFDIO_COPY, the actual creation of page table entries and copying of the data in mcopy_atomic may happen either before of after the memory mapping modifications and there is no way for the uffd monitor to maintain consistent view of the process memory layout. For instance, let's consider fork() running in parallel with userfaultfd_copy(): process | uffd monitor ---------------------------------+------------------------------ fork() | userfaultfd_copy() ... | ... dup_mmap() | down_read(mmap_sem) down_write(mmap_sem) | /* create PTEs, copy data */ dup_uffd() | up_read(mmap_sem) copy_page_range() | up_write(mmap_sem) | dup_uffd_complete() | /* notify monitor */ | If the userfaultfd_copy() takes the mmap_sem first, the new page(s) will be present by the time copy_page_range() is called and they will appear in the child's memory mappings. However, if the fork() is the first to take the mmap_sem, the new pages won't be mapped in the child's address space. If the pages are not present and child tries to access them, the monitor will get page fault notification and everything is fine. However, if the pages *are present*, the child can access them without uffd noticing. And if we copy them into child it'll see the wrong data. Since we are talking about background copy, we'd need to decide whether the pages should be copied or not regardless #PF notifications. Since userfaultfd monitor has no way to determine what was the order, let's disallow userfaultfd_copy in parallel with the non-cooperative events. In such case we return -EAGAIN and the uffd monitor can understand that userfaultfd_copy() clashed with a non-cooperative event and take an appropriate action. Link: http://lkml.kernel.org/r/1527061324-19949-1-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Pavel Emelyanov <xemul@virtuozzo.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-08 03:09:25 +03:00
ret = -EAGAIN;
userfaultfd: change mmap_changing to atomic Patch series "userfaultfd: minor bug fixes". Three unrelated bug fixes. The first two addresses possible issues (not too theoretical ones), but I did not encounter them in practice. The third patch addresses a test bug that causes the test to fail on my system. It has been sent before as part of a bigger RFC. This patch (of 3): mmap_changing is currently a boolean variable, which is set and cleared without any lock that protects against concurrent modifications. mmap_changing is supposed to mark whether userfaultfd page-faults handling should be retried since mappings are undergoing a change. However, concurrent calls, for instance to madvise(MADV_DONTNEED), might cause mmap_changing to be false, although the remove event was still not read (hence acknowledged) by the user. Change mmap_changing to atomic_t and increase/decrease appropriately. Add a debug assertion to see whether mmap_changing is negative. Link: https://lkml.kernel.org/r/20210808020724.1022515-1-namit@vmware.com Link: https://lkml.kernel.org/r/20210808020724.1022515-2-namit@vmware.com Fixes: df2cc96e77011 ("userfaultfd: prevent non-cooperative events vs mcopy_atomic races") Signed-off-by: Nadav Amit <namit@vmware.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Peter Xu <peterx@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03 00:58:56 +03:00
if (atomic_read(&ctx->mmap_changing))
userfaultfd: prevent non-cooperative events vs mcopy_atomic races If a process monitored with userfaultfd changes it's memory mappings or forks() at the same time as uffd monitor fills the process memory with UFFDIO_COPY, the actual creation of page table entries and copying of the data in mcopy_atomic may happen either before of after the memory mapping modifications and there is no way for the uffd monitor to maintain consistent view of the process memory layout. For instance, let's consider fork() running in parallel with userfaultfd_copy(): process | uffd monitor ---------------------------------+------------------------------ fork() | userfaultfd_copy() ... | ... dup_mmap() | down_read(mmap_sem) down_write(mmap_sem) | /* create PTEs, copy data */ dup_uffd() | up_read(mmap_sem) copy_page_range() | up_write(mmap_sem) | dup_uffd_complete() | /* notify monitor */ | If the userfaultfd_copy() takes the mmap_sem first, the new page(s) will be present by the time copy_page_range() is called and they will appear in the child's memory mappings. However, if the fork() is the first to take the mmap_sem, the new pages won't be mapped in the child's address space. If the pages are not present and child tries to access them, the monitor will get page fault notification and everything is fine. However, if the pages *are present*, the child can access them without uffd noticing. And if we copy them into child it'll see the wrong data. Since we are talking about background copy, we'd need to decide whether the pages should be copied or not regardless #PF notifications. Since userfaultfd monitor has no way to determine what was the order, let's disallow userfaultfd_copy in parallel with the non-cooperative events. In such case we return -EAGAIN and the uffd monitor can understand that userfaultfd_copy() clashed with a non-cooperative event and take an appropriate action. Link: http://lkml.kernel.org/r/1527061324-19949-1-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Pavel Emelyanov <xemul@virtuozzo.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-08 03:09:25 +03:00
goto out;
ret = -EFAULT;
if (copy_from_user(&uffdio_copy, user_uffdio_copy,
/* don't copy "copy" last field */
sizeof(uffdio_copy)-sizeof(__s64)))
goto out;
userfaultfd: do not untag user pointers Patch series "userfaultfd: do not untag user pointers", v5. If a user program uses userfaultfd on ranges of heap memory, it may end up passing a tagged pointer to the kernel in the range.start field of the UFFDIO_REGISTER ioctl. This can happen when using an MTE-capable allocator, or on Android if using the Tagged Pointers feature for MTE readiness [1]. When a fault subsequently occurs, the tag is stripped from the fault address returned to the application in the fault.address field of struct uffd_msg. However, from the application's perspective, the tagged address *is* the memory address, so if the application is unaware of memory tags, it may get confused by receiving an address that is, from its point of view, outside of the bounds of the allocation. We observed this behavior in the kselftest for userfaultfd [2] but other applications could have the same problem. Address this by not untagging pointers passed to the userfaultfd ioctls. Instead, let the system call fail. Also change the kselftest to use mmap so that it doesn't encounter this problem. [1] https://source.android.com/devices/tech/debug/tagged-pointers [2] tools/testing/selftests/vm/userfaultfd.c This patch (of 2): Do not untag pointers passed to the userfaultfd ioctls. Instead, let the system call fail. This will provide an early indication of problems with tag-unaware userspace code instead of letting the code get confused later, and is consistent with how we decided to handle brk/mmap/mremap in commit dcde237319e6 ("mm: Avoid creating virtual address aliases in brk()/mmap()/mremap()"), as well as being consistent with the existing tagged address ABI documentation relating to how ioctl arguments are handled. The code change is a revert of commit 7d0325749a6c ("userfaultfd: untag user pointers") plus some fixups to some additional calls to validate_range that have appeared since then. [1] https://source.android.com/devices/tech/debug/tagged-pointers [2] tools/testing/selftests/vm/userfaultfd.c Link: https://lkml.kernel.org/r/20210714195437.118982-1-pcc@google.com Link: https://lkml.kernel.org/r/20210714195437.118982-2-pcc@google.com Link: https://linux-review.googlesource.com/id/I761aa9f0344454c482b83fcfcce547db0a25501b Fixes: 63f0c6037965 ("arm64: Introduce prctl() options to control the tagged user addresses ABI") Signed-off-by: Peter Collingbourne <pcc@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alistair Delva <adelva@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dave Martin <Dave.Martin@arm.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mitch Phillips <mitchp@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will@kernel.org> Cc: William McVicker <willmcvicker@google.com> Cc: <stable@vger.kernel.org> [5.4] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-24 01:50:01 +03:00
ret = validate_range(ctx->mm, uffdio_copy.dst, uffdio_copy.len);
if (ret)
goto out;
/*
* double check for wraparound just in case. copy_from_user()
* will later check uffdio_copy.src + uffdio_copy.len to fit
* in the userland range.
*/
ret = -EINVAL;
if (uffdio_copy.src + uffdio_copy.len <= uffdio_copy.src)
goto out;
if (uffdio_copy.mode & ~(UFFDIO_COPY_MODE_DONTWAKE|UFFDIO_COPY_MODE_WP))
goto out;
if (mmget_not_zero(ctx->mm)) {
ret = mcopy_atomic(ctx->mm, uffdio_copy.dst, uffdio_copy.src,
uffdio_copy.len, &ctx->mmap_changing,
uffdio_copy.mode);
mmput(ctx->mm);
} else {
return -ESRCH;
}
if (unlikely(put_user(ret, &user_uffdio_copy->copy)))
return -EFAULT;
if (ret < 0)
goto out;
BUG_ON(!ret);
/* len == 0 would wake all */
range.len = ret;
if (!(uffdio_copy.mode & UFFDIO_COPY_MODE_DONTWAKE)) {
range.start = uffdio_copy.dst;
wake_userfault(ctx, &range);
}
ret = range.len == uffdio_copy.len ? 0 : -EAGAIN;
out:
return ret;
}
static int userfaultfd_zeropage(struct userfaultfd_ctx *ctx,
unsigned long arg)
{
__s64 ret;
struct uffdio_zeropage uffdio_zeropage;
struct uffdio_zeropage __user *user_uffdio_zeropage;
struct userfaultfd_wake_range range;
user_uffdio_zeropage = (struct uffdio_zeropage __user *) arg;
userfaultfd: prevent non-cooperative events vs mcopy_atomic races If a process monitored with userfaultfd changes it's memory mappings or forks() at the same time as uffd monitor fills the process memory with UFFDIO_COPY, the actual creation of page table entries and copying of the data in mcopy_atomic may happen either before of after the memory mapping modifications and there is no way for the uffd monitor to maintain consistent view of the process memory layout. For instance, let's consider fork() running in parallel with userfaultfd_copy(): process | uffd monitor ---------------------------------+------------------------------ fork() | userfaultfd_copy() ... | ... dup_mmap() | down_read(mmap_sem) down_write(mmap_sem) | /* create PTEs, copy data */ dup_uffd() | up_read(mmap_sem) copy_page_range() | up_write(mmap_sem) | dup_uffd_complete() | /* notify monitor */ | If the userfaultfd_copy() takes the mmap_sem first, the new page(s) will be present by the time copy_page_range() is called and they will appear in the child's memory mappings. However, if the fork() is the first to take the mmap_sem, the new pages won't be mapped in the child's address space. If the pages are not present and child tries to access them, the monitor will get page fault notification and everything is fine. However, if the pages *are present*, the child can access them without uffd noticing. And if we copy them into child it'll see the wrong data. Since we are talking about background copy, we'd need to decide whether the pages should be copied or not regardless #PF notifications. Since userfaultfd monitor has no way to determine what was the order, let's disallow userfaultfd_copy in parallel with the non-cooperative events. In such case we return -EAGAIN and the uffd monitor can understand that userfaultfd_copy() clashed with a non-cooperative event and take an appropriate action. Link: http://lkml.kernel.org/r/1527061324-19949-1-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Pavel Emelyanov <xemul@virtuozzo.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-08 03:09:25 +03:00
ret = -EAGAIN;
userfaultfd: change mmap_changing to atomic Patch series "userfaultfd: minor bug fixes". Three unrelated bug fixes. The first two addresses possible issues (not too theoretical ones), but I did not encounter them in practice. The third patch addresses a test bug that causes the test to fail on my system. It has been sent before as part of a bigger RFC. This patch (of 3): mmap_changing is currently a boolean variable, which is set and cleared without any lock that protects against concurrent modifications. mmap_changing is supposed to mark whether userfaultfd page-faults handling should be retried since mappings are undergoing a change. However, concurrent calls, for instance to madvise(MADV_DONTNEED), might cause mmap_changing to be false, although the remove event was still not read (hence acknowledged) by the user. Change mmap_changing to atomic_t and increase/decrease appropriately. Add a debug assertion to see whether mmap_changing is negative. Link: https://lkml.kernel.org/r/20210808020724.1022515-1-namit@vmware.com Link: https://lkml.kernel.org/r/20210808020724.1022515-2-namit@vmware.com Fixes: df2cc96e77011 ("userfaultfd: prevent non-cooperative events vs mcopy_atomic races") Signed-off-by: Nadav Amit <namit@vmware.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Peter Xu <peterx@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03 00:58:56 +03:00
if (atomic_read(&ctx->mmap_changing))
userfaultfd: prevent non-cooperative events vs mcopy_atomic races If a process monitored with userfaultfd changes it's memory mappings or forks() at the same time as uffd monitor fills the process memory with UFFDIO_COPY, the actual creation of page table entries and copying of the data in mcopy_atomic may happen either before of after the memory mapping modifications and there is no way for the uffd monitor to maintain consistent view of the process memory layout. For instance, let's consider fork() running in parallel with userfaultfd_copy(): process | uffd monitor ---------------------------------+------------------------------ fork() | userfaultfd_copy() ... | ... dup_mmap() | down_read(mmap_sem) down_write(mmap_sem) | /* create PTEs, copy data */ dup_uffd() | up_read(mmap_sem) copy_page_range() | up_write(mmap_sem) | dup_uffd_complete() | /* notify monitor */ | If the userfaultfd_copy() takes the mmap_sem first, the new page(s) will be present by the time copy_page_range() is called and they will appear in the child's memory mappings. However, if the fork() is the first to take the mmap_sem, the new pages won't be mapped in the child's address space. If the pages are not present and child tries to access them, the monitor will get page fault notification and everything is fine. However, if the pages *are present*, the child can access them without uffd noticing. And if we copy them into child it'll see the wrong data. Since we are talking about background copy, we'd need to decide whether the pages should be copied or not regardless #PF notifications. Since userfaultfd monitor has no way to determine what was the order, let's disallow userfaultfd_copy in parallel with the non-cooperative events. In such case we return -EAGAIN and the uffd monitor can understand that userfaultfd_copy() clashed with a non-cooperative event and take an appropriate action. Link: http://lkml.kernel.org/r/1527061324-19949-1-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Pavel Emelyanov <xemul@virtuozzo.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-08 03:09:25 +03:00
goto out;
ret = -EFAULT;
if (copy_from_user(&uffdio_zeropage, user_uffdio_zeropage,
/* don't copy "zeropage" last field */
sizeof(uffdio_zeropage)-sizeof(__s64)))
goto out;
userfaultfd: do not untag user pointers Patch series "userfaultfd: do not untag user pointers", v5. If a user program uses userfaultfd on ranges of heap memory, it may end up passing a tagged pointer to the kernel in the range.start field of the UFFDIO_REGISTER ioctl. This can happen when using an MTE-capable allocator, or on Android if using the Tagged Pointers feature for MTE readiness [1]. When a fault subsequently occurs, the tag is stripped from the fault address returned to the application in the fault.address field of struct uffd_msg. However, from the application's perspective, the tagged address *is* the memory address, so if the application is unaware of memory tags, it may get confused by receiving an address that is, from its point of view, outside of the bounds of the allocation. We observed this behavior in the kselftest for userfaultfd [2] but other applications could have the same problem. Address this by not untagging pointers passed to the userfaultfd ioctls. Instead, let the system call fail. Also change the kselftest to use mmap so that it doesn't encounter this problem. [1] https://source.android.com/devices/tech/debug/tagged-pointers [2] tools/testing/selftests/vm/userfaultfd.c This patch (of 2): Do not untag pointers passed to the userfaultfd ioctls. Instead, let the system call fail. This will provide an early indication of problems with tag-unaware userspace code instead of letting the code get confused later, and is consistent with how we decided to handle brk/mmap/mremap in commit dcde237319e6 ("mm: Avoid creating virtual address aliases in brk()/mmap()/mremap()"), as well as being consistent with the existing tagged address ABI documentation relating to how ioctl arguments are handled. The code change is a revert of commit 7d0325749a6c ("userfaultfd: untag user pointers") plus some fixups to some additional calls to validate_range that have appeared since then. [1] https://source.android.com/devices/tech/debug/tagged-pointers [2] tools/testing/selftests/vm/userfaultfd.c Link: https://lkml.kernel.org/r/20210714195437.118982-1-pcc@google.com Link: https://lkml.kernel.org/r/20210714195437.118982-2-pcc@google.com Link: https://linux-review.googlesource.com/id/I761aa9f0344454c482b83fcfcce547db0a25501b Fixes: 63f0c6037965 ("arm64: Introduce prctl() options to control the tagged user addresses ABI") Signed-off-by: Peter Collingbourne <pcc@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alistair Delva <adelva@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dave Martin <Dave.Martin@arm.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mitch Phillips <mitchp@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will@kernel.org> Cc: William McVicker <willmcvicker@google.com> Cc: <stable@vger.kernel.org> [5.4] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-24 01:50:01 +03:00
ret = validate_range(ctx->mm, uffdio_zeropage.range.start,
uffdio_zeropage.range.len);
if (ret)
goto out;
ret = -EINVAL;
if (uffdio_zeropage.mode & ~UFFDIO_ZEROPAGE_MODE_DONTWAKE)
goto out;
if (mmget_not_zero(ctx->mm)) {
ret = mfill_zeropage(ctx->mm, uffdio_zeropage.range.start,
userfaultfd: prevent non-cooperative events vs mcopy_atomic races If a process monitored with userfaultfd changes it's memory mappings or forks() at the same time as uffd monitor fills the process memory with UFFDIO_COPY, the actual creation of page table entries and copying of the data in mcopy_atomic may happen either before of after the memory mapping modifications and there is no way for the uffd monitor to maintain consistent view of the process memory layout. For instance, let's consider fork() running in parallel with userfaultfd_copy(): process | uffd monitor ---------------------------------+------------------------------ fork() | userfaultfd_copy() ... | ... dup_mmap() | down_read(mmap_sem) down_write(mmap_sem) | /* create PTEs, copy data */ dup_uffd() | up_read(mmap_sem) copy_page_range() | up_write(mmap_sem) | dup_uffd_complete() | /* notify monitor */ | If the userfaultfd_copy() takes the mmap_sem first, the new page(s) will be present by the time copy_page_range() is called and they will appear in the child's memory mappings. However, if the fork() is the first to take the mmap_sem, the new pages won't be mapped in the child's address space. If the pages are not present and child tries to access them, the monitor will get page fault notification and everything is fine. However, if the pages *are present*, the child can access them without uffd noticing. And if we copy them into child it'll see the wrong data. Since we are talking about background copy, we'd need to decide whether the pages should be copied or not regardless #PF notifications. Since userfaultfd monitor has no way to determine what was the order, let's disallow userfaultfd_copy in parallel with the non-cooperative events. In such case we return -EAGAIN and the uffd monitor can understand that userfaultfd_copy() clashed with a non-cooperative event and take an appropriate action. Link: http://lkml.kernel.org/r/1527061324-19949-1-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: Mike Rapoport <rppt@linux.vnet.ibm.com> Acked-by: Pavel Emelyanov <xemul@virtuozzo.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-08 03:09:25 +03:00
uffdio_zeropage.range.len,
&ctx->mmap_changing);
mmput(ctx->mm);
} else {
return -ESRCH;
}
if (unlikely(put_user(ret, &user_uffdio_zeropage->zeropage)))
return -EFAULT;
if (ret < 0)
goto out;
/* len == 0 would wake all */
BUG_ON(!ret);
range.len = ret;
if (!(uffdio_zeropage.mode & UFFDIO_ZEROPAGE_MODE_DONTWAKE)) {
range.start = uffdio_zeropage.range.start;
wake_userfault(ctx, &range);
}
ret = range.len == uffdio_zeropage.range.len ? 0 : -EAGAIN;
out:
return ret;
}
userfaultfd: wp: add the writeprotect API to userfaultfd ioctl Introduce the new uffd-wp APIs for userspace. Firstly, we'll allow to do UFFDIO_REGISTER with write protection tracking using the new UFFDIO_REGISTER_MODE_WP flag. Note that this flag can co-exist with the existing UFFDIO_REGISTER_MODE_MISSING, in which case the userspace program can not only resolve missing page faults, and at the same time tracking page data changes along the way. Secondly, we introduced the new UFFDIO_WRITEPROTECT API to do page level write protection tracking. Note that we will need to register the memory region with UFFDIO_REGISTER_MODE_WP before that. [peterx@redhat.com: write up the commit message] [peterx@redhat.com: remove useless block, write commit message, check against VM_MAYWRITE rather than VM_WRITE when register] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-14-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 06:06:12 +03:00
static int userfaultfd_writeprotect(struct userfaultfd_ctx *ctx,
unsigned long arg)
{
int ret;
struct uffdio_writeprotect uffdio_wp;
struct uffdio_writeprotect __user *user_uffdio_wp;
struct userfaultfd_wake_range range;
bool mode_wp, mode_dontwake;
userfaultfd: wp: add the writeprotect API to userfaultfd ioctl Introduce the new uffd-wp APIs for userspace. Firstly, we'll allow to do UFFDIO_REGISTER with write protection tracking using the new UFFDIO_REGISTER_MODE_WP flag. Note that this flag can co-exist with the existing UFFDIO_REGISTER_MODE_MISSING, in which case the userspace program can not only resolve missing page faults, and at the same time tracking page data changes along the way. Secondly, we introduced the new UFFDIO_WRITEPROTECT API to do page level write protection tracking. Note that we will need to register the memory region with UFFDIO_REGISTER_MODE_WP before that. [peterx@redhat.com: write up the commit message] [peterx@redhat.com: remove useless block, write commit message, check against VM_MAYWRITE rather than VM_WRITE when register] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-14-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 06:06:12 +03:00
userfaultfd: change mmap_changing to atomic Patch series "userfaultfd: minor bug fixes". Three unrelated bug fixes. The first two addresses possible issues (not too theoretical ones), but I did not encounter them in practice. The third patch addresses a test bug that causes the test to fail on my system. It has been sent before as part of a bigger RFC. This patch (of 3): mmap_changing is currently a boolean variable, which is set and cleared without any lock that protects against concurrent modifications. mmap_changing is supposed to mark whether userfaultfd page-faults handling should be retried since mappings are undergoing a change. However, concurrent calls, for instance to madvise(MADV_DONTNEED), might cause mmap_changing to be false, although the remove event was still not read (hence acknowledged) by the user. Change mmap_changing to atomic_t and increase/decrease appropriately. Add a debug assertion to see whether mmap_changing is negative. Link: https://lkml.kernel.org/r/20210808020724.1022515-1-namit@vmware.com Link: https://lkml.kernel.org/r/20210808020724.1022515-2-namit@vmware.com Fixes: df2cc96e77011 ("userfaultfd: prevent non-cooperative events vs mcopy_atomic races") Signed-off-by: Nadav Amit <namit@vmware.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Peter Xu <peterx@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03 00:58:56 +03:00
if (atomic_read(&ctx->mmap_changing))
userfaultfd: wp: add the writeprotect API to userfaultfd ioctl Introduce the new uffd-wp APIs for userspace. Firstly, we'll allow to do UFFDIO_REGISTER with write protection tracking using the new UFFDIO_REGISTER_MODE_WP flag. Note that this flag can co-exist with the existing UFFDIO_REGISTER_MODE_MISSING, in which case the userspace program can not only resolve missing page faults, and at the same time tracking page data changes along the way. Secondly, we introduced the new UFFDIO_WRITEPROTECT API to do page level write protection tracking. Note that we will need to register the memory region with UFFDIO_REGISTER_MODE_WP before that. [peterx@redhat.com: write up the commit message] [peterx@redhat.com: remove useless block, write commit message, check against VM_MAYWRITE rather than VM_WRITE when register] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-14-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 06:06:12 +03:00
return -EAGAIN;
user_uffdio_wp = (struct uffdio_writeprotect __user *) arg;
if (copy_from_user(&uffdio_wp, user_uffdio_wp,
sizeof(struct uffdio_writeprotect)))
return -EFAULT;
userfaultfd: do not untag user pointers Patch series "userfaultfd: do not untag user pointers", v5. If a user program uses userfaultfd on ranges of heap memory, it may end up passing a tagged pointer to the kernel in the range.start field of the UFFDIO_REGISTER ioctl. This can happen when using an MTE-capable allocator, or on Android if using the Tagged Pointers feature for MTE readiness [1]. When a fault subsequently occurs, the tag is stripped from the fault address returned to the application in the fault.address field of struct uffd_msg. However, from the application's perspective, the tagged address *is* the memory address, so if the application is unaware of memory tags, it may get confused by receiving an address that is, from its point of view, outside of the bounds of the allocation. We observed this behavior in the kselftest for userfaultfd [2] but other applications could have the same problem. Address this by not untagging pointers passed to the userfaultfd ioctls. Instead, let the system call fail. Also change the kselftest to use mmap so that it doesn't encounter this problem. [1] https://source.android.com/devices/tech/debug/tagged-pointers [2] tools/testing/selftests/vm/userfaultfd.c This patch (of 2): Do not untag pointers passed to the userfaultfd ioctls. Instead, let the system call fail. This will provide an early indication of problems with tag-unaware userspace code instead of letting the code get confused later, and is consistent with how we decided to handle brk/mmap/mremap in commit dcde237319e6 ("mm: Avoid creating virtual address aliases in brk()/mmap()/mremap()"), as well as being consistent with the existing tagged address ABI documentation relating to how ioctl arguments are handled. The code change is a revert of commit 7d0325749a6c ("userfaultfd: untag user pointers") plus some fixups to some additional calls to validate_range that have appeared since then. [1] https://source.android.com/devices/tech/debug/tagged-pointers [2] tools/testing/selftests/vm/userfaultfd.c Link: https://lkml.kernel.org/r/20210714195437.118982-1-pcc@google.com Link: https://lkml.kernel.org/r/20210714195437.118982-2-pcc@google.com Link: https://linux-review.googlesource.com/id/I761aa9f0344454c482b83fcfcce547db0a25501b Fixes: 63f0c6037965 ("arm64: Introduce prctl() options to control the tagged user addresses ABI") Signed-off-by: Peter Collingbourne <pcc@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alistair Delva <adelva@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dave Martin <Dave.Martin@arm.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mitch Phillips <mitchp@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will@kernel.org> Cc: William McVicker <willmcvicker@google.com> Cc: <stable@vger.kernel.org> [5.4] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-24 01:50:01 +03:00
ret = validate_range(ctx->mm, uffdio_wp.range.start,
userfaultfd: wp: add the writeprotect API to userfaultfd ioctl Introduce the new uffd-wp APIs for userspace. Firstly, we'll allow to do UFFDIO_REGISTER with write protection tracking using the new UFFDIO_REGISTER_MODE_WP flag. Note that this flag can co-exist with the existing UFFDIO_REGISTER_MODE_MISSING, in which case the userspace program can not only resolve missing page faults, and at the same time tracking page data changes along the way. Secondly, we introduced the new UFFDIO_WRITEPROTECT API to do page level write protection tracking. Note that we will need to register the memory region with UFFDIO_REGISTER_MODE_WP before that. [peterx@redhat.com: write up the commit message] [peterx@redhat.com: remove useless block, write commit message, check against VM_MAYWRITE rather than VM_WRITE when register] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-14-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 06:06:12 +03:00
uffdio_wp.range.len);
if (ret)
return ret;
if (uffdio_wp.mode & ~(UFFDIO_WRITEPROTECT_MODE_DONTWAKE |
UFFDIO_WRITEPROTECT_MODE_WP))
return -EINVAL;
mode_wp = uffdio_wp.mode & UFFDIO_WRITEPROTECT_MODE_WP;
mode_dontwake = uffdio_wp.mode & UFFDIO_WRITEPROTECT_MODE_DONTWAKE;
if (mode_wp && mode_dontwake)
userfaultfd: wp: add the writeprotect API to userfaultfd ioctl Introduce the new uffd-wp APIs for userspace. Firstly, we'll allow to do UFFDIO_REGISTER with write protection tracking using the new UFFDIO_REGISTER_MODE_WP flag. Note that this flag can co-exist with the existing UFFDIO_REGISTER_MODE_MISSING, in which case the userspace program can not only resolve missing page faults, and at the same time tracking page data changes along the way. Secondly, we introduced the new UFFDIO_WRITEPROTECT API to do page level write protection tracking. Note that we will need to register the memory region with UFFDIO_REGISTER_MODE_WP before that. [peterx@redhat.com: write up the commit message] [peterx@redhat.com: remove useless block, write commit message, check against VM_MAYWRITE rather than VM_WRITE when register] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-14-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 06:06:12 +03:00
return -EINVAL;
if (mmget_not_zero(ctx->mm)) {
ret = mwriteprotect_range(ctx->mm, uffdio_wp.range.start,
uffdio_wp.range.len, mode_wp,
&ctx->mmap_changing);
mmput(ctx->mm);
} else {
return -ESRCH;
}
userfaultfd: wp: add the writeprotect API to userfaultfd ioctl Introduce the new uffd-wp APIs for userspace. Firstly, we'll allow to do UFFDIO_REGISTER with write protection tracking using the new UFFDIO_REGISTER_MODE_WP flag. Note that this flag can co-exist with the existing UFFDIO_REGISTER_MODE_MISSING, in which case the userspace program can not only resolve missing page faults, and at the same time tracking page data changes along the way. Secondly, we introduced the new UFFDIO_WRITEPROTECT API to do page level write protection tracking. Note that we will need to register the memory region with UFFDIO_REGISTER_MODE_WP before that. [peterx@redhat.com: write up the commit message] [peterx@redhat.com: remove useless block, write commit message, check against VM_MAYWRITE rather than VM_WRITE when register] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-14-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 06:06:12 +03:00
if (ret)
return ret;
if (!mode_wp && !mode_dontwake) {
userfaultfd: wp: add the writeprotect API to userfaultfd ioctl Introduce the new uffd-wp APIs for userspace. Firstly, we'll allow to do UFFDIO_REGISTER with write protection tracking using the new UFFDIO_REGISTER_MODE_WP flag. Note that this flag can co-exist with the existing UFFDIO_REGISTER_MODE_MISSING, in which case the userspace program can not only resolve missing page faults, and at the same time tracking page data changes along the way. Secondly, we introduced the new UFFDIO_WRITEPROTECT API to do page level write protection tracking. Note that we will need to register the memory region with UFFDIO_REGISTER_MODE_WP before that. [peterx@redhat.com: write up the commit message] [peterx@redhat.com: remove useless block, write commit message, check against VM_MAYWRITE rather than VM_WRITE when register] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-14-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 06:06:12 +03:00
range.start = uffdio_wp.range.start;
range.len = uffdio_wp.range.len;
wake_userfault(ctx, &range);
}
return ret;
}
userfaultfd: add UFFDIO_CONTINUE ioctl This ioctl is how userspace ought to resolve "minor" userfaults. The idea is, userspace is notified that a minor fault has occurred. It might change the contents of the page using its second non-UFFD mapping, or not. Then, it calls UFFDIO_CONTINUE to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". Note that it doesn't make much sense to use UFFDIO_{COPY,ZEROPAGE} for MINOR registered VMAs. ZEROPAGE maps the VMA to the zero page; but in the minor fault case, we already have some pre-existing underlying page. Likewise, UFFDIO_COPY isn't useful if we have a second non-UFFD mapping. We'd just use memcpy() or similar instead. It turns out hugetlb_mcopy_atomic_pte() already does very close to what we want, if an existing page is provided via `struct page **pagep`. We already special-case the behavior a bit for the UFFDIO_ZEROPAGE case, so just extend that design: add an enum for the three modes of operation, and make the small adjustments needed for the MCOPY_ATOMIC_CONTINUE case. (Basically, look up the existing page, and avoid adding the existing page to the page cache or calling set_page_huge_active() on it.) Link: https://lkml.kernel.org/r/20210301222728.176417-5-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Reviewed-by: Peter Xu <peterx@redhat.com> Cc: Adam Ruprecht <ruprecht@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Cannon Matthews <cannonmatthews@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: David Rientjes <rientjes@google.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michal Koutn" <mkoutny@suse.com> Cc: Michel Lespinasse <walken@google.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oliver Upton <oupton@google.com> Cc: Shaohua Li <shli@fb.com> Cc: Shawn Anastasio <shawn@anastas.io> Cc: Steven Price <steven.price@arm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 04:35:49 +03:00
static int userfaultfd_continue(struct userfaultfd_ctx *ctx, unsigned long arg)
{
__s64 ret;
struct uffdio_continue uffdio_continue;
struct uffdio_continue __user *user_uffdio_continue;
struct userfaultfd_wake_range range;
user_uffdio_continue = (struct uffdio_continue __user *)arg;
ret = -EAGAIN;
userfaultfd: change mmap_changing to atomic Patch series "userfaultfd: minor bug fixes". Three unrelated bug fixes. The first two addresses possible issues (not too theoretical ones), but I did not encounter them in practice. The third patch addresses a test bug that causes the test to fail on my system. It has been sent before as part of a bigger RFC. This patch (of 3): mmap_changing is currently a boolean variable, which is set and cleared without any lock that protects against concurrent modifications. mmap_changing is supposed to mark whether userfaultfd page-faults handling should be retried since mappings are undergoing a change. However, concurrent calls, for instance to madvise(MADV_DONTNEED), might cause mmap_changing to be false, although the remove event was still not read (hence acknowledged) by the user. Change mmap_changing to atomic_t and increase/decrease appropriately. Add a debug assertion to see whether mmap_changing is negative. Link: https://lkml.kernel.org/r/20210808020724.1022515-1-namit@vmware.com Link: https://lkml.kernel.org/r/20210808020724.1022515-2-namit@vmware.com Fixes: df2cc96e77011 ("userfaultfd: prevent non-cooperative events vs mcopy_atomic races") Signed-off-by: Nadav Amit <namit@vmware.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Peter Xu <peterx@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03 00:58:56 +03:00
if (atomic_read(&ctx->mmap_changing))
userfaultfd: add UFFDIO_CONTINUE ioctl This ioctl is how userspace ought to resolve "minor" userfaults. The idea is, userspace is notified that a minor fault has occurred. It might change the contents of the page using its second non-UFFD mapping, or not. Then, it calls UFFDIO_CONTINUE to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". Note that it doesn't make much sense to use UFFDIO_{COPY,ZEROPAGE} for MINOR registered VMAs. ZEROPAGE maps the VMA to the zero page; but in the minor fault case, we already have some pre-existing underlying page. Likewise, UFFDIO_COPY isn't useful if we have a second non-UFFD mapping. We'd just use memcpy() or similar instead. It turns out hugetlb_mcopy_atomic_pte() already does very close to what we want, if an existing page is provided via `struct page **pagep`. We already special-case the behavior a bit for the UFFDIO_ZEROPAGE case, so just extend that design: add an enum for the three modes of operation, and make the small adjustments needed for the MCOPY_ATOMIC_CONTINUE case. (Basically, look up the existing page, and avoid adding the existing page to the page cache or calling set_page_huge_active() on it.) Link: https://lkml.kernel.org/r/20210301222728.176417-5-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Reviewed-by: Peter Xu <peterx@redhat.com> Cc: Adam Ruprecht <ruprecht@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Cannon Matthews <cannonmatthews@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: David Rientjes <rientjes@google.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michal Koutn" <mkoutny@suse.com> Cc: Michel Lespinasse <walken@google.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oliver Upton <oupton@google.com> Cc: Shaohua Li <shli@fb.com> Cc: Shawn Anastasio <shawn@anastas.io> Cc: Steven Price <steven.price@arm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 04:35:49 +03:00
goto out;
ret = -EFAULT;
if (copy_from_user(&uffdio_continue, user_uffdio_continue,
/* don't copy the output fields */
sizeof(uffdio_continue) - (sizeof(__s64))))
goto out;
userfaultfd: do not untag user pointers Patch series "userfaultfd: do not untag user pointers", v5. If a user program uses userfaultfd on ranges of heap memory, it may end up passing a tagged pointer to the kernel in the range.start field of the UFFDIO_REGISTER ioctl. This can happen when using an MTE-capable allocator, or on Android if using the Tagged Pointers feature for MTE readiness [1]. When a fault subsequently occurs, the tag is stripped from the fault address returned to the application in the fault.address field of struct uffd_msg. However, from the application's perspective, the tagged address *is* the memory address, so if the application is unaware of memory tags, it may get confused by receiving an address that is, from its point of view, outside of the bounds of the allocation. We observed this behavior in the kselftest for userfaultfd [2] but other applications could have the same problem. Address this by not untagging pointers passed to the userfaultfd ioctls. Instead, let the system call fail. Also change the kselftest to use mmap so that it doesn't encounter this problem. [1] https://source.android.com/devices/tech/debug/tagged-pointers [2] tools/testing/selftests/vm/userfaultfd.c This patch (of 2): Do not untag pointers passed to the userfaultfd ioctls. Instead, let the system call fail. This will provide an early indication of problems with tag-unaware userspace code instead of letting the code get confused later, and is consistent with how we decided to handle brk/mmap/mremap in commit dcde237319e6 ("mm: Avoid creating virtual address aliases in brk()/mmap()/mremap()"), as well as being consistent with the existing tagged address ABI documentation relating to how ioctl arguments are handled. The code change is a revert of commit 7d0325749a6c ("userfaultfd: untag user pointers") plus some fixups to some additional calls to validate_range that have appeared since then. [1] https://source.android.com/devices/tech/debug/tagged-pointers [2] tools/testing/selftests/vm/userfaultfd.c Link: https://lkml.kernel.org/r/20210714195437.118982-1-pcc@google.com Link: https://lkml.kernel.org/r/20210714195437.118982-2-pcc@google.com Link: https://linux-review.googlesource.com/id/I761aa9f0344454c482b83fcfcce547db0a25501b Fixes: 63f0c6037965 ("arm64: Introduce prctl() options to control the tagged user addresses ABI") Signed-off-by: Peter Collingbourne <pcc@google.com> Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Alistair Delva <adelva@google.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dave Martin <Dave.Martin@arm.com> Cc: Evgenii Stepanov <eugenis@google.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: Mitch Phillips <mitchp@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: Will Deacon <will@kernel.org> Cc: William McVicker <willmcvicker@google.com> Cc: <stable@vger.kernel.org> [5.4] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-07-24 01:50:01 +03:00
ret = validate_range(ctx->mm, uffdio_continue.range.start,
userfaultfd: add UFFDIO_CONTINUE ioctl This ioctl is how userspace ought to resolve "minor" userfaults. The idea is, userspace is notified that a minor fault has occurred. It might change the contents of the page using its second non-UFFD mapping, or not. Then, it calls UFFDIO_CONTINUE to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". Note that it doesn't make much sense to use UFFDIO_{COPY,ZEROPAGE} for MINOR registered VMAs. ZEROPAGE maps the VMA to the zero page; but in the minor fault case, we already have some pre-existing underlying page. Likewise, UFFDIO_COPY isn't useful if we have a second non-UFFD mapping. We'd just use memcpy() or similar instead. It turns out hugetlb_mcopy_atomic_pte() already does very close to what we want, if an existing page is provided via `struct page **pagep`. We already special-case the behavior a bit for the UFFDIO_ZEROPAGE case, so just extend that design: add an enum for the three modes of operation, and make the small adjustments needed for the MCOPY_ATOMIC_CONTINUE case. (Basically, look up the existing page, and avoid adding the existing page to the page cache or calling set_page_huge_active() on it.) Link: https://lkml.kernel.org/r/20210301222728.176417-5-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Reviewed-by: Peter Xu <peterx@redhat.com> Cc: Adam Ruprecht <ruprecht@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Cannon Matthews <cannonmatthews@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: David Rientjes <rientjes@google.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michal Koutn" <mkoutny@suse.com> Cc: Michel Lespinasse <walken@google.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oliver Upton <oupton@google.com> Cc: Shaohua Li <shli@fb.com> Cc: Shawn Anastasio <shawn@anastas.io> Cc: Steven Price <steven.price@arm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 04:35:49 +03:00
uffdio_continue.range.len);
if (ret)
goto out;
ret = -EINVAL;
/* double check for wraparound just in case. */
if (uffdio_continue.range.start + uffdio_continue.range.len <=
uffdio_continue.range.start) {
goto out;
}
if (uffdio_continue.mode & ~UFFDIO_CONTINUE_MODE_DONTWAKE)
goto out;
if (mmget_not_zero(ctx->mm)) {
ret = mcopy_continue(ctx->mm, uffdio_continue.range.start,
uffdio_continue.range.len,
&ctx->mmap_changing);
mmput(ctx->mm);
} else {
return -ESRCH;
}
if (unlikely(put_user(ret, &user_uffdio_continue->mapped)))
return -EFAULT;
if (ret < 0)
goto out;
/* len == 0 would wake all */
BUG_ON(!ret);
range.len = ret;
if (!(uffdio_continue.mode & UFFDIO_CONTINUE_MODE_DONTWAKE)) {
range.start = uffdio_continue.range.start;
wake_userfault(ctx, &range);
}
ret = range.len == uffdio_continue.range.len ? 0 : -EAGAIN;
out:
return ret;
}
static inline unsigned int uffd_ctx_features(__u64 user_features)
{
/*
* For the current set of features the bits just coincide. Set
* UFFD_FEATURE_INITIALIZED to mark the features as enabled.
*/
return (unsigned int)user_features | UFFD_FEATURE_INITIALIZED;
}
/*
* userland asks for a certain API version and we return which bits
* and ioctl commands are implemented in this kernel for such API
* version or -EINVAL if unknown.
*/
static int userfaultfd_api(struct userfaultfd_ctx *ctx,
unsigned long arg)
{
struct uffdio_api uffdio_api;
void __user *buf = (void __user *)arg;
unsigned int ctx_features;
int ret;
__u64 features;
ret = -EFAULT;
userfaultfd: change the read API to return a uffd_msg I had requests to return the full address (not the page aligned one) to userland. It's not entirely clear how the page offset could be relevant because userfaults aren't like SIGBUS that can sigjump to a different place and it actually skip resolving the fault depending on a page offset. There's currently no real way to skip the fault especially because after a UFFDIO_COPY|ZEROPAGE, the fault is optimized to be retried within the kernel without having to return to userland first (not even self modifying code replacing the .text that touched the faulting address would prevent the fault to be repeated). Userland cannot skip repeating the fault even more so if the fault was triggered by a KVM secondary page fault or any get_user_pages or any copy-user inside some syscall which will return to kernel code. The second time FAULT_FLAG_RETRY_NOWAIT won't be set leading to a SIGBUS being raised because the userfault can't wait if it cannot release the mmap_map first (and FAULT_FLAG_RETRY_NOWAIT is required for that). Still returning userland a proper structure during the read() on the uffd, can allow to use the current UFFD_API for the future non-cooperative extensions too and it looks cleaner as well. Once we get additional fields there's no point to return the fault address page aligned anymore to reuse the bits below PAGE_SHIFT. The only downside is that the read() syscall will read 32bytes instead of 8bytes but that's not going to be measurable overhead. The total number of new events that can be extended or of new future bits for already shipped events, is limited to 64 by the features field of the uffdio_api structure. If more will be needed a bump of UFFD_API will be required. [akpm@linux-foundation.org: use __packed] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Pavel Emelyanov <xemul@parallels.com> Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com> Cc: zhang.zhanghailiang@huawei.com Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Cc: Andres Lagar-Cavilla <andreslc@google.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Feiner <pfeiner@google.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-09-05 01:46:37 +03:00
if (copy_from_user(&uffdio_api, buf, sizeof(uffdio_api)))
goto out;
userfaultfd: don't fail on unrecognized features The basic interaction for setting up a userfaultfd is, userspace issues a UFFDIO_API ioctl, and passes in a set of zero or more feature flags, indicating the features they would prefer to use. Of course, different kernels may support different sets of features (depending on kernel version, kconfig options, architecture, etc). Userspace's expectations may also not match: perhaps it was built against newer kernel headers, which defined some features the kernel it's running on doesn't support. Currently, if userspace passes in a flag we don't recognize, the initialization fails and we return -EINVAL. This isn't great, though. Userspace doesn't have an obvious way to react to this; sure, one of the features I asked for was unavailable, but which one? The only option it has is to turn off things "at random" and hope something works. Instead, modify UFFDIO_API to just ignore any unrecognized feature flags. The interaction is now that the initialization will succeed, and as always we return the *subset* of feature flags that can actually be used back to userspace. Now userspace has an obvious way to react: it checks if any flags it asked for are missing. If so, it can conclude this kernel doesn't support those, and it can either resign itself to not using them, or fail with an error on its own, or whatever else. Link: https://lkml.kernel.org/r/20220722201513.1624158-1-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Cc: Peter Xu <peterx@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2022-07-22 23:15:13 +03:00
/* Ignore unsupported features (userspace built against newer kernel) */
features = uffdio_api.features & UFFD_API_FEATURES;
2019-12-01 04:58:01 +03:00
ret = -EPERM;
if ((features & UFFD_FEATURE_EVENT_FORK) && !capable(CAP_SYS_PTRACE))
goto err_out;
/* report all available features and ioctls to userland */
uffdio_api.features = UFFD_API_FEATURES;
userfaultfd: add minor fault registration mode Patch series "userfaultfd: add minor fault handling", v9. Overview ======== This series adds a new userfaultfd feature, UFFD_FEATURE_MINOR_HUGETLBFS. When enabled (via the UFFDIO_API ioctl), this feature means that any hugetlbfs VMAs registered with UFFDIO_REGISTER_MODE_MISSING will *also* get events for "minor" faults. By "minor" fault, I mean the following situation: Let there exist two mappings (i.e., VMAs) to the same page(s) (shared memory). One of the mappings is registered with userfaultfd (in minor mode), and the other is not. Via the non-UFFD mapping, the underlying pages have already been allocated & filled with some contents. The UFFD mapping has not yet been faulted in; when it is touched for the first time, this results in what I'm calling a "minor" fault. As a concrete example, when working with hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing page. We also add a new ioctl to resolve such faults: UFFDIO_CONTINUE. The idea is, userspace resolves the fault by either a) doing nothing if the contents are already correct, or b) updating the underlying contents using the second, non-UFFD mapping (via memcpy/memset or similar, or something fancier like RDMA, or etc...). In either case, userspace issues UFFDIO_CONTINUE to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". Use Case ======== Consider the use case of VM live migration (e.g. under QEMU/KVM): 1. While a VM is still running, we copy the contents of its memory to a target machine. The pages are populated on the target by writing to the non-UFFD mapping, using the setup described above. The VM is still running (and therefore its memory is likely changing), so this may be repeated several times, until we decide the target is "up to date enough". 2. We pause the VM on the source, and start executing on the target machine. During this gap, the VM's user(s) will *see* a pause, so it is desirable to minimize this window. 3. Between the last time any page was copied from the source to the target, and when the VM was paused, the contents of that page may have changed - and therefore the copy we have on the target machine is out of date. Although we can keep track of which pages are out of date, for VMs with large amounts of memory, it is "slow" to transfer this information to the target machine. We want to resume execution before such a transfer would complete. 4. So, the guest begins executing on the target machine. The first time it touches its memory (via the UFFD-registered mapping), userspace wants to intercept this fault. Userspace checks whether or not the page is up to date, and if not, copies the updated page from the source machine, via the non-UFFD mapping. Finally, whether a copy was performed or not, userspace issues a UFFDIO_CONTINUE ioctl to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". We don't have to do all of the final updates on-demand. The userfaultfd manager can, in the background, also copy over updated pages once it receives the map of which pages are up-to-date or not. Interaction with Existing APIs ============================== Because this is a feature, a registered VMA could potentially receive both missing and minor faults. I spent some time thinking through how the existing API interacts with the new feature: UFFDIO_CONTINUE cannot be used to resolve non-minor faults, as it does not allocate a new page. If UFFDIO_CONTINUE is used on a non-minor fault: - For non-shared memory or shmem, -EINVAL is returned. - For hugetlb, -EFAULT is returned. UFFDIO_COPY and UFFDIO_ZEROPAGE cannot be used to resolve minor faults. Without modifications, the existing codepath assumes a new page needs to be allocated. This is okay, since userspace must have a second non-UFFD-registered mapping anyway, thus there isn't much reason to want to use these in any case (just memcpy or memset or similar). - If UFFDIO_COPY is used on a minor fault, -EEXIST is returned. - If UFFDIO_ZEROPAGE is used on a minor fault, -EEXIST is returned (or -EINVAL in the case of hugetlb, as UFFDIO_ZEROPAGE is unsupported in any case). - UFFDIO_WRITEPROTECT simply doesn't work with shared memory, and returns -ENOENT in that case (regardless of the kind of fault). Future Work =========== This series only supports hugetlbfs. I have a second series in flight to support shmem as well, extending the functionality. This series is more mature than the shmem support at this point, and the functionality works fully on hugetlbfs, so this series can be merged first and then shmem support will follow. This patch (of 6): This feature allows userspace to intercept "minor" faults. By "minor" faults, I mean the following situation: Let there exist two mappings (i.e., VMAs) to the same page(s). One of the mappings is registered with userfaultfd (in minor mode), and the other is not. Via the non-UFFD mapping, the underlying pages have already been allocated & filled with some contents. The UFFD mapping has not yet been faulted in; when it is touched for the first time, this results in what I'm calling a "minor" fault. As a concrete example, when working with hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing page. This commit adds the new registration mode, and sets the relevant flag on the VMAs being registered. In the hugetlb fault path, if we find that we have huge_pte_none(), but find_lock_page() does indeed find an existing page, then we have a "minor" fault, and if the VMA has the userfaultfd registration flag, we call into userfaultfd to handle it. This is implemented as a new registration mode, instead of an API feature. This is because the alternative implementation has significant drawbacks [1]. However, doing it this was requires we allocate a VM_* flag for the new registration mode. On 32-bit systems, there are no unused bits, so this feature is only supported on architectures with CONFIG_ARCH_USES_HIGH_VMA_FLAGS. When attempting to register a VMA in MINOR mode on 32-bit architectures, we return -EINVAL. [1] https://lore.kernel.org/patchwork/patch/1380226/ [peterx@redhat.com: fix minor fault page leak] Link: https://lkml.kernel.org/r/20210322175132.36659-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20210301222728.176417-1-axelrasmussen@google.com Link: https://lkml.kernel.org/r/20210301222728.176417-2-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michal Koutn" <mkoutny@suse.com> Cc: Michel Lespinasse <walken@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: Shawn Anastasio <shawn@anastas.io> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Steven Price <steven.price@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Adam Ruprecht <ruprecht@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Cannon Matthews <cannonmatthews@google.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Oliver Upton <oupton@google.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 04:35:36 +03:00
#ifndef CONFIG_HAVE_ARCH_USERFAULTFD_MINOR
uffdio_api.features &=
~(UFFD_FEATURE_MINOR_HUGETLBFS | UFFD_FEATURE_MINOR_SHMEM);
#endif
#ifndef CONFIG_HAVE_ARCH_USERFAULTFD_WP
uffdio_api.features &= ~UFFD_FEATURE_PAGEFAULT_FLAG_WP;
#endif
#ifndef CONFIG_PTE_MARKER_UFFD_WP
uffdio_api.features &= ~UFFD_FEATURE_WP_HUGETLBFS_SHMEM;
userfaultfd: add minor fault registration mode Patch series "userfaultfd: add minor fault handling", v9. Overview ======== This series adds a new userfaultfd feature, UFFD_FEATURE_MINOR_HUGETLBFS. When enabled (via the UFFDIO_API ioctl), this feature means that any hugetlbfs VMAs registered with UFFDIO_REGISTER_MODE_MISSING will *also* get events for "minor" faults. By "minor" fault, I mean the following situation: Let there exist two mappings (i.e., VMAs) to the same page(s) (shared memory). One of the mappings is registered with userfaultfd (in minor mode), and the other is not. Via the non-UFFD mapping, the underlying pages have already been allocated & filled with some contents. The UFFD mapping has not yet been faulted in; when it is touched for the first time, this results in what I'm calling a "minor" fault. As a concrete example, when working with hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing page. We also add a new ioctl to resolve such faults: UFFDIO_CONTINUE. The idea is, userspace resolves the fault by either a) doing nothing if the contents are already correct, or b) updating the underlying contents using the second, non-UFFD mapping (via memcpy/memset or similar, or something fancier like RDMA, or etc...). In either case, userspace issues UFFDIO_CONTINUE to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". Use Case ======== Consider the use case of VM live migration (e.g. under QEMU/KVM): 1. While a VM is still running, we copy the contents of its memory to a target machine. The pages are populated on the target by writing to the non-UFFD mapping, using the setup described above. The VM is still running (and therefore its memory is likely changing), so this may be repeated several times, until we decide the target is "up to date enough". 2. We pause the VM on the source, and start executing on the target machine. During this gap, the VM's user(s) will *see* a pause, so it is desirable to minimize this window. 3. Between the last time any page was copied from the source to the target, and when the VM was paused, the contents of that page may have changed - and therefore the copy we have on the target machine is out of date. Although we can keep track of which pages are out of date, for VMs with large amounts of memory, it is "slow" to transfer this information to the target machine. We want to resume execution before such a transfer would complete. 4. So, the guest begins executing on the target machine. The first time it touches its memory (via the UFFD-registered mapping), userspace wants to intercept this fault. Userspace checks whether or not the page is up to date, and if not, copies the updated page from the source machine, via the non-UFFD mapping. Finally, whether a copy was performed or not, userspace issues a UFFDIO_CONTINUE ioctl to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". We don't have to do all of the final updates on-demand. The userfaultfd manager can, in the background, also copy over updated pages once it receives the map of which pages are up-to-date or not. Interaction with Existing APIs ============================== Because this is a feature, a registered VMA could potentially receive both missing and minor faults. I spent some time thinking through how the existing API interacts with the new feature: UFFDIO_CONTINUE cannot be used to resolve non-minor faults, as it does not allocate a new page. If UFFDIO_CONTINUE is used on a non-minor fault: - For non-shared memory or shmem, -EINVAL is returned. - For hugetlb, -EFAULT is returned. UFFDIO_COPY and UFFDIO_ZEROPAGE cannot be used to resolve minor faults. Without modifications, the existing codepath assumes a new page needs to be allocated. This is okay, since userspace must have a second non-UFFD-registered mapping anyway, thus there isn't much reason to want to use these in any case (just memcpy or memset or similar). - If UFFDIO_COPY is used on a minor fault, -EEXIST is returned. - If UFFDIO_ZEROPAGE is used on a minor fault, -EEXIST is returned (or -EINVAL in the case of hugetlb, as UFFDIO_ZEROPAGE is unsupported in any case). - UFFDIO_WRITEPROTECT simply doesn't work with shared memory, and returns -ENOENT in that case (regardless of the kind of fault). Future Work =========== This series only supports hugetlbfs. I have a second series in flight to support shmem as well, extending the functionality. This series is more mature than the shmem support at this point, and the functionality works fully on hugetlbfs, so this series can be merged first and then shmem support will follow. This patch (of 6): This feature allows userspace to intercept "minor" faults. By "minor" faults, I mean the following situation: Let there exist two mappings (i.e., VMAs) to the same page(s). One of the mappings is registered with userfaultfd (in minor mode), and the other is not. Via the non-UFFD mapping, the underlying pages have already been allocated & filled with some contents. The UFFD mapping has not yet been faulted in; when it is touched for the first time, this results in what I'm calling a "minor" fault. As a concrete example, when working with hugetlbfs, we have huge_pte_none(), but find_lock_page() finds an existing page. This commit adds the new registration mode, and sets the relevant flag on the VMAs being registered. In the hugetlb fault path, if we find that we have huge_pte_none(), but find_lock_page() does indeed find an existing page, then we have a "minor" fault, and if the VMA has the userfaultfd registration flag, we call into userfaultfd to handle it. This is implemented as a new registration mode, instead of an API feature. This is because the alternative implementation has significant drawbacks [1]. However, doing it this was requires we allocate a VM_* flag for the new registration mode. On 32-bit systems, there are no unused bits, so this feature is only supported on architectures with CONFIG_ARCH_USES_HIGH_VMA_FLAGS. When attempting to register a VMA in MINOR mode on 32-bit architectures, we return -EINVAL. [1] https://lore.kernel.org/patchwork/patch/1380226/ [peterx@redhat.com: fix minor fault page leak] Link: https://lkml.kernel.org/r/20210322175132.36659-1-peterx@redhat.com Link: https://lkml.kernel.org/r/20210301222728.176417-1-axelrasmussen@google.com Link: https://lkml.kernel.org/r/20210301222728.176417-2-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michal Koutn" <mkoutny@suse.com> Cc: Michel Lespinasse <walken@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Peter Xu <peterx@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: Shawn Anastasio <shawn@anastas.io> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Steven Price <steven.price@arm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Adam Ruprecht <ruprecht@google.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Cannon Matthews <cannonmatthews@google.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: David Rientjes <rientjes@google.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Oliver Upton <oupton@google.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 04:35:36 +03:00
#endif
uffdio_api.ioctls = UFFD_API_IOCTLS;
ret = -EFAULT;
if (copy_to_user(buf, &uffdio_api, sizeof(uffdio_api)))
goto out;
/* only enable the requested features for this uffd context */
ctx_features = uffd_ctx_features(features);
ret = -EINVAL;
if (cmpxchg(&ctx->features, 0, ctx_features) != 0)
goto err_out;
ret = 0;
out:
return ret;
2019-12-01 04:58:01 +03:00
err_out:
memset(&uffdio_api, 0, sizeof(uffdio_api));
if (copy_to_user(buf, &uffdio_api, sizeof(uffdio_api)))
ret = -EFAULT;
goto out;
}
static long userfaultfd_ioctl(struct file *file, unsigned cmd,
unsigned long arg)
{
int ret = -EINVAL;
struct userfaultfd_ctx *ctx = file->private_data;
if (cmd != UFFDIO_API && !userfaultfd_is_initialized(ctx))
return -EINVAL;
switch(cmd) {
case UFFDIO_API:
ret = userfaultfd_api(ctx, arg);
break;
case UFFDIO_REGISTER:
ret = userfaultfd_register(ctx, arg);
break;
case UFFDIO_UNREGISTER:
ret = userfaultfd_unregister(ctx, arg);
break;
case UFFDIO_WAKE:
ret = userfaultfd_wake(ctx, arg);
break;
case UFFDIO_COPY:
ret = userfaultfd_copy(ctx, arg);
break;
case UFFDIO_ZEROPAGE:
ret = userfaultfd_zeropage(ctx, arg);
break;
userfaultfd: wp: add the writeprotect API to userfaultfd ioctl Introduce the new uffd-wp APIs for userspace. Firstly, we'll allow to do UFFDIO_REGISTER with write protection tracking using the new UFFDIO_REGISTER_MODE_WP flag. Note that this flag can co-exist with the existing UFFDIO_REGISTER_MODE_MISSING, in which case the userspace program can not only resolve missing page faults, and at the same time tracking page data changes along the way. Secondly, we introduced the new UFFDIO_WRITEPROTECT API to do page level write protection tracking. Note that we will need to register the memory region with UFFDIO_REGISTER_MODE_WP before that. [peterx@redhat.com: write up the commit message] [peterx@redhat.com: remove useless block, write commit message, check against VM_MAYWRITE rather than VM_WRITE when register] Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: Bobby Powers <bobbypowers@gmail.com> Cc: Brian Geffon <bgeffon@google.com> Cc: David Hildenbrand <david@redhat.com> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: Martin Cracauer <cracauer@cons.org> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Mel Gorman <mgorman@suse.de> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pavel Emelyanov <xemul@openvz.org> Cc: Rik van Riel <riel@redhat.com> Cc: Shaohua Li <shli@fb.com> Link: http://lkml.kernel.org/r/20200220163112.11409-14-peterx@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-07 06:06:12 +03:00
case UFFDIO_WRITEPROTECT:
ret = userfaultfd_writeprotect(ctx, arg);
break;
userfaultfd: add UFFDIO_CONTINUE ioctl This ioctl is how userspace ought to resolve "minor" userfaults. The idea is, userspace is notified that a minor fault has occurred. It might change the contents of the page using its second non-UFFD mapping, or not. Then, it calls UFFDIO_CONTINUE to tell the kernel "I have ensured the page contents are correct, carry on setting up the mapping". Note that it doesn't make much sense to use UFFDIO_{COPY,ZEROPAGE} for MINOR registered VMAs. ZEROPAGE maps the VMA to the zero page; but in the minor fault case, we already have some pre-existing underlying page. Likewise, UFFDIO_COPY isn't useful if we have a second non-UFFD mapping. We'd just use memcpy() or similar instead. It turns out hugetlb_mcopy_atomic_pte() already does very close to what we want, if an existing page is provided via `struct page **pagep`. We already special-case the behavior a bit for the UFFDIO_ZEROPAGE case, so just extend that design: add an enum for the three modes of operation, and make the small adjustments needed for the MCOPY_ATOMIC_CONTINUE case. (Basically, look up the existing page, and avoid adding the existing page to the page cache or calling set_page_huge_active() on it.) Link: https://lkml.kernel.org/r/20210301222728.176417-5-axelrasmussen@google.com Signed-off-by: Axel Rasmussen <axelrasmussen@google.com> Reviewed-by: Peter Xu <peterx@redhat.com> Cc: Adam Ruprecht <ruprecht@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Anshuman Khandual <anshuman.khandual@arm.com> Cc: Cannon Matthews <cannonmatthews@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chinwen Chang <chinwen.chang@mediatek.com> Cc: David Rientjes <rientjes@google.com> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jann Horn <jannh@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Kirill A. Shutemov <kirill@shutemov.name> Cc: Lokesh Gidra <lokeshgidra@google.com> Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Michal Koutn" <mkoutny@suse.com> Cc: Michel Lespinasse <walken@google.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Mina Almasry <almasrymina@google.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oliver Upton <oupton@google.com> Cc: Shaohua Li <shli@fb.com> Cc: Shawn Anastasio <shawn@anastas.io> Cc: Steven Price <steven.price@arm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-05-05 04:35:49 +03:00
case UFFDIO_CONTINUE:
ret = userfaultfd_continue(ctx, arg);
break;
}
return ret;
}
#ifdef CONFIG_PROC_FS
static void userfaultfd_show_fdinfo(struct seq_file *m, struct file *f)
{
struct userfaultfd_ctx *ctx = f->private_data;
wait_queue_entry_t *wq;
unsigned long pending = 0, total = 0;
fs/userfaultfd.c: disable irqs for fault_pending and event locks When IOCB_CMD_POLL is used on a userfaultfd, aio_poll() disables IRQs and takes kioctx::ctx_lock, then userfaultfd_ctx::fd_wqh.lock. This may have to wait for userfaultfd_ctx::fd_wqh.lock to be released by userfaultfd_ctx_read(), which in turn can be waiting for userfaultfd_ctx::fault_pending_wqh.lock or userfaultfd_ctx::event_wqh.lock. But elsewhere the fault_pending_wqh and event_wqh locks are taken with IRQs enabled. Since the IRQ handler may take kioctx::ctx_lock, lockdep reports that a deadlock is possible. Fix it by always disabling IRQs when taking the fault_pending_wqh and event_wqh locks. Commit ae62c16e105a ("userfaultfd: disable irqs when taking the waitqueue lock") didn't fix this because it only accounted for the fd_wqh lock, not the other locks nested inside it. Link: http://lkml.kernel.org/r/20190627075004.21259-1-ebiggers@kernel.org Fixes: bfe4037e722e ("aio: implement IOCB_CMD_POLL") Signed-off-by: Eric Biggers <ebiggers@google.com> Reported-by: syzbot+fab6de82892b6b9c6191@syzkaller.appspotmail.com Reported-by: syzbot+53c0b767f7ca0dc0c451@syzkaller.appspotmail.com Reported-by: syzbot+a3accb352f9c22041cfa@syzkaller.appspotmail.com Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> [4.19+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-05 01:14:39 +03:00
spin_lock_irq(&ctx->fault_pending_wqh.lock);
sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list naming So I've noticed a number of instances where it was not obvious from the code whether ->task_list was for a wait-queue head or a wait-queue entry. Furthermore, there's a number of wait-queue users where the lists are not for 'tasks' but other entities (poll tables, etc.), in which case the 'task_list' name is actively confusing. To clear this all up, name the wait-queue head and entry list structure fields unambiguously: struct wait_queue_head::task_list => ::head struct wait_queue_entry::task_list => ::entry For example, this code: rqw->wait.task_list.next != &wait->task_list ... is was pretty unclear (to me) what it's doing, while now it's written this way: rqw->wait.head.next != &wait->entry ... which makes it pretty clear that we are iterating a list until we see the head. Other examples are: list_for_each_entry_safe(pos, next, &x->task_list, task_list) { list_for_each_entry(wq, &fence->wait.task_list, task_list) { ... where it's unclear (to me) what we are iterating, and during review it's hard to tell whether it's trying to walk a wait-queue entry (which would be a bug), while now it's written as: list_for_each_entry_safe(pos, next, &x->head, entry) { list_for_each_entry(wq, &fence->wait.head, entry) { Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20 13:06:46 +03:00
list_for_each_entry(wq, &ctx->fault_pending_wqh.head, entry) {
pending++;
total++;
}
sched/wait: Disambiguate wq_entry->task_list and wq_head->task_list naming So I've noticed a number of instances where it was not obvious from the code whether ->task_list was for a wait-queue head or a wait-queue entry. Furthermore, there's a number of wait-queue users where the lists are not for 'tasks' but other entities (poll tables, etc.), in which case the 'task_list' name is actively confusing. To clear this all up, name the wait-queue head and entry list structure fields unambiguously: struct wait_queue_head::task_list => ::head struct wait_queue_entry::task_list => ::entry For example, this code: rqw->wait.task_list.next != &wait->task_list ... is was pretty unclear (to me) what it's doing, while now it's written this way: rqw->wait.head.next != &wait->entry ... which makes it pretty clear that we are iterating a list until we see the head. Other examples are: list_for_each_entry_safe(pos, next, &x->task_list, task_list) { list_for_each_entry(wq, &fence->wait.task_list, task_list) { ... where it's unclear (to me) what we are iterating, and during review it's hard to tell whether it's trying to walk a wait-queue entry (which would be a bug), while now it's written as: list_for_each_entry_safe(pos, next, &x->head, entry) { list_for_each_entry(wq, &fence->wait.head, entry) { Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20 13:06:46 +03:00
list_for_each_entry(wq, &ctx->fault_wqh.head, entry) {
total++;
}
fs/userfaultfd.c: disable irqs for fault_pending and event locks When IOCB_CMD_POLL is used on a userfaultfd, aio_poll() disables IRQs and takes kioctx::ctx_lock, then userfaultfd_ctx::fd_wqh.lock. This may have to wait for userfaultfd_ctx::fd_wqh.lock to be released by userfaultfd_ctx_read(), which in turn can be waiting for userfaultfd_ctx::fault_pending_wqh.lock or userfaultfd_ctx::event_wqh.lock. But elsewhere the fault_pending_wqh and event_wqh locks are taken with IRQs enabled. Since the IRQ handler may take kioctx::ctx_lock, lockdep reports that a deadlock is possible. Fix it by always disabling IRQs when taking the fault_pending_wqh and event_wqh locks. Commit ae62c16e105a ("userfaultfd: disable irqs when taking the waitqueue lock") didn't fix this because it only accounted for the fd_wqh lock, not the other locks nested inside it. Link: http://lkml.kernel.org/r/20190627075004.21259-1-ebiggers@kernel.org Fixes: bfe4037e722e ("aio: implement IOCB_CMD_POLL") Signed-off-by: Eric Biggers <ebiggers@google.com> Reported-by: syzbot+fab6de82892b6b9c6191@syzkaller.appspotmail.com Reported-by: syzbot+53c0b767f7ca0dc0c451@syzkaller.appspotmail.com Reported-by: syzbot+a3accb352f9c22041cfa@syzkaller.appspotmail.com Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> [4.19+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-05 01:14:39 +03:00
spin_unlock_irq(&ctx->fault_pending_wqh.lock);
/*
* If more protocols will be added, there will be all shown
* separated by a space. Like this:
* protocols: aa:... bb:...
*/
seq_printf(m, "pending:\t%lu\ntotal:\t%lu\nAPI:\t%Lx:%x:%Lx\n",
pending, total, UFFD_API, ctx->features,
UFFD_API_IOCTLS|UFFD_API_RANGE_IOCTLS);
}
#endif
static const struct file_operations userfaultfd_fops = {
#ifdef CONFIG_PROC_FS
.show_fdinfo = userfaultfd_show_fdinfo,
#endif
.release = userfaultfd_release,
.poll = userfaultfd_poll,
.read = userfaultfd_read,
.unlocked_ioctl = userfaultfd_ioctl,
.compat_ioctl = compat_ptr_ioctl,
.llseek = noop_llseek,
};
static void init_once_userfaultfd_ctx(void *mem)
{
struct userfaultfd_ctx *ctx = (struct userfaultfd_ctx *) mem;
init_waitqueue_head(&ctx->fault_pending_wqh);
init_waitqueue_head(&ctx->fault_wqh);
init_waitqueue_head(&ctx->event_wqh);
init_waitqueue_head(&ctx->fd_wqh);
seqcount_spinlock_init(&ctx->refile_seq, &ctx->fault_pending_wqh.lock);
}
SYSCALL_DEFINE1(userfaultfd, int, flags)
{
struct userfaultfd_ctx *ctx;
int fd;
userfaultfd: add user-mode only option to unprivileged_userfaultfd sysctl knob With this change, when the knob is set to 0, it allows unprivileged users to call userfaultfd, like when it is set to 1, but with the restriction that page faults from only user-mode can be handled. In this mode, an unprivileged user (without SYS_CAP_PTRACE capability) must pass UFFD_USER_MODE_ONLY to userfaultd or the API will fail with EPERM. This enables administrators to reduce the likelihood that an attacker with access to userfaultfd can delay faulting kernel code to widen timing windows for other exploits. The default value of this knob is changed to 0. This is required for correct functioning of pipe mutex. However, this will fail postcopy live migration, which will be unnoticeable to the VM guests. To avoid this, set 'vm.userfault = 1' in /sys/sysctl.conf. The main reason this change is desirable as in the short term is that the Android userland will behave as with the sysctl set to zero. So without this commit, any Linux binary using userfaultfd to manage its memory would behave differently if run within the Android userland. For more details, refer to Andrea's reply [1]. [1] https://lore.kernel.org/lkml/20200904033438.GI9411@redhat.com/ Link: https://lkml.kernel.org/r/20201120030411.2690816-3-lokeshgidra@google.com Signed-off-by: Lokesh Gidra <lokeshgidra@google.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Peter Xu <peterx@redhat.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Stephen Smalley <stephen.smalley.work@gmail.com> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Daniel Colascione <dancol@dancol.org> Cc: "Joel Fernandes (Google)" <joel@joelfernandes.org> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: <calin@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Shaohua Li <shli@fb.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Nitin Gupta <nigupta@nvidia.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Daniel Colascione <dancol@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:13:54 +03:00
if (!sysctl_unprivileged_userfaultfd &&
(flags & UFFD_USER_MODE_ONLY) == 0 &&
!capable(CAP_SYS_PTRACE)) {
printk_once(KERN_WARNING "uffd: Set unprivileged_userfaultfd "
"sysctl knob to 1 if kernel faults must be handled "
"without obtaining CAP_SYS_PTRACE capability\n");
userfaultfd/sysctl: add vm.unprivileged_userfaultfd Userfaultfd can be misued to make it easier to exploit existing use-after-free (and similar) bugs that might otherwise only make a short window or race condition available. By using userfaultfd to stall a kernel thread, a malicious program can keep some state that it wrote, stable for an extended period, which it can then access using an existing exploit. While it doesn't cause the exploit itself, and while it's not the only thing that can stall a kernel thread when accessing a memory location, it's one of the few that never needs privilege. We can add a flag, allowing userfaultfd to be restricted, so that in general it won't be useable by arbitrary user programs, but in environments that require userfaultfd it can be turned back on. Add a global sysctl knob "vm.unprivileged_userfaultfd" to control whether userfaultfd is allowed by unprivileged users. When this is set to zero, only privileged users (root user, or users with the CAP_SYS_PTRACE capability) will be able to use the userfaultfd syscalls. Andrea said: : The only difference between the bpf sysctl and the userfaultfd sysctl : this way is that the bpf sysctl adds the CAP_SYS_ADMIN capability : requirement, while userfaultfd adds the CAP_SYS_PTRACE requirement, : because the userfaultfd monitor is more likely to need CAP_SYS_PTRACE : already if it's doing other kind of tracking on processes runtime, in : addition of userfaultfd. In other words both syscalls works only for : root, when the two sysctl are opt-in set to 1. [dgilbert@redhat.com: changelog additions] [akpm@linux-foundation.org: documentation tweak, per Mike] Link: http://lkml.kernel.org/r/20190319030722.12441-2-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Suggested-by: Andrea Arcangeli <aarcange@redhat.com> Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Maxime Coquelin <maxime.coquelin@redhat.com> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Martin Cracauer <cracauer@cons.org> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mel Gorman <mgorman@suse.de> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 03:16:41 +03:00
return -EPERM;
userfaultfd: add user-mode only option to unprivileged_userfaultfd sysctl knob With this change, when the knob is set to 0, it allows unprivileged users to call userfaultfd, like when it is set to 1, but with the restriction that page faults from only user-mode can be handled. In this mode, an unprivileged user (without SYS_CAP_PTRACE capability) must pass UFFD_USER_MODE_ONLY to userfaultd or the API will fail with EPERM. This enables administrators to reduce the likelihood that an attacker with access to userfaultfd can delay faulting kernel code to widen timing windows for other exploits. The default value of this knob is changed to 0. This is required for correct functioning of pipe mutex. However, this will fail postcopy live migration, which will be unnoticeable to the VM guests. To avoid this, set 'vm.userfault = 1' in /sys/sysctl.conf. The main reason this change is desirable as in the short term is that the Android userland will behave as with the sysctl set to zero. So without this commit, any Linux binary using userfaultfd to manage its memory would behave differently if run within the Android userland. For more details, refer to Andrea's reply [1]. [1] https://lore.kernel.org/lkml/20200904033438.GI9411@redhat.com/ Link: https://lkml.kernel.org/r/20201120030411.2690816-3-lokeshgidra@google.com Signed-off-by: Lokesh Gidra <lokeshgidra@google.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Peter Xu <peterx@redhat.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Stephen Smalley <stephen.smalley.work@gmail.com> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Daniel Colascione <dancol@dancol.org> Cc: "Joel Fernandes (Google)" <joel@joelfernandes.org> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: <calin@google.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Shaohua Li <shli@fb.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Nitin Gupta <nigupta@nvidia.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Daniel Colascione <dancol@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:13:54 +03:00
}
userfaultfd/sysctl: add vm.unprivileged_userfaultfd Userfaultfd can be misued to make it easier to exploit existing use-after-free (and similar) bugs that might otherwise only make a short window or race condition available. By using userfaultfd to stall a kernel thread, a malicious program can keep some state that it wrote, stable for an extended period, which it can then access using an existing exploit. While it doesn't cause the exploit itself, and while it's not the only thing that can stall a kernel thread when accessing a memory location, it's one of the few that never needs privilege. We can add a flag, allowing userfaultfd to be restricted, so that in general it won't be useable by arbitrary user programs, but in environments that require userfaultfd it can be turned back on. Add a global sysctl knob "vm.unprivileged_userfaultfd" to control whether userfaultfd is allowed by unprivileged users. When this is set to zero, only privileged users (root user, or users with the CAP_SYS_PTRACE capability) will be able to use the userfaultfd syscalls. Andrea said: : The only difference between the bpf sysctl and the userfaultfd sysctl : this way is that the bpf sysctl adds the CAP_SYS_ADMIN capability : requirement, while userfaultfd adds the CAP_SYS_PTRACE requirement, : because the userfaultfd monitor is more likely to need CAP_SYS_PTRACE : already if it's doing other kind of tracking on processes runtime, in : addition of userfaultfd. In other words both syscalls works only for : root, when the two sysctl are opt-in set to 1. [dgilbert@redhat.com: changelog additions] [akpm@linux-foundation.org: documentation tweak, per Mike] Link: http://lkml.kernel.org/r/20190319030722.12441-2-peterx@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com> Suggested-by: Andrea Arcangeli <aarcange@redhat.com> Suggested-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Maxime Coquelin <maxime.coquelin@redhat.com> Cc: Maya Gokhale <gokhale2@llnl.gov> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Pavel Emelyanov <xemul@virtuozzo.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Martin Cracauer <cracauer@cons.org> Cc: Denis Plotnikov <dplotnikov@virtuozzo.com> Cc: Marty McFadden <mcfadden8@llnl.gov> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Kees Cook <keescook@chromium.org> Cc: Mel Gorman <mgorman@suse.de> Cc: "Kirill A . Shutemov" <kirill@shutemov.name> Cc: "Dr . David Alan Gilbert" <dgilbert@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-05-14 03:16:41 +03:00
BUG_ON(!current->mm);
/* Check the UFFD_* constants for consistency. */
userfaultfd: add UFFD_USER_MODE_ONLY Patch series "Control over userfaultfd kernel-fault handling", v6. This patch series is split from [1]. The other series enables SELinux support for userfaultfd file descriptors so that its creation and movement can be controlled. It has been demonstrated on various occasions that suspending kernel code execution for an arbitrary amount of time at any access to userspace memory (copy_from_user()/copy_to_user()/...) can be exploited to change the intended behavior of the kernel. For instance, handling page faults in kernel-mode using userfaultfd has been exploited in [2, 3]. Likewise, FUSE, which is similar to userfaultfd in this respect, has been exploited in [4, 5] for similar outcome. This small patch series adds a new flag to userfaultfd(2) that allows callers to give up the ability to handle kernel-mode faults with the resulting UFFD file object. It then adds a 'user-mode only' option to the unprivileged_userfaultfd sysctl knob to require unprivileged callers to use this new flag. The purpose of this new interface is to decrease the chance of an unprivileged userfaultfd user taking advantage of userfaultfd to enhance security vulnerabilities by lengthening the race window in kernel code. [1] https://lore.kernel.org/lkml/20200211225547.235083-1-dancol@google.com/ [2] https://duasynt.com/blog/linux-kernel-heap-spray [3] https://duasynt.com/blog/cve-2016-6187-heap-off-by-one-exploit [4] https://googleprojectzero.blogspot.com/2016/06/exploiting-recursion-in-linux-kernel_20.html [5] https://bugs.chromium.org/p/project-zero/issues/detail?id=808 This patch (of 2): userfaultfd handles page faults from both user and kernel code. Add a new UFFD_USER_MODE_ONLY flag for userfaultfd(2) that makes the resulting userfaultfd object refuse to handle faults from kernel mode, treating these faults as if SIGBUS were always raised, causing the kernel code to fail with EFAULT. A future patch adds a knob allowing administrators to give some processes the ability to create userfaultfd file objects only if they pass UFFD_USER_MODE_ONLY, reducing the likelihood that these processes will exploit userfaultfd's ability to delay kernel page faults to open timing windows for future exploits. Link: https://lkml.kernel.org/r/20201120030411.2690816-1-lokeshgidra@google.com Link: https://lkml.kernel.org/r/20201120030411.2690816-2-lokeshgidra@google.com Signed-off-by: Daniel Colascione <dancol@google.com> Signed-off-by: Lokesh Gidra <lokeshgidra@google.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: <calin@google.com> Cc: Daniel Colascione <dancol@dancol.org> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Joel Fernandes (Google)" <joel@joelfernandes.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nitin Gupta <nigupta@nvidia.com> Cc: Peter Xu <peterx@redhat.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Shaohua Li <shli@fb.com> Cc: Stephen Smalley <stephen.smalley.work@gmail.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:13:49 +03:00
BUILD_BUG_ON(UFFD_USER_MODE_ONLY & UFFD_SHARED_FCNTL_FLAGS);
BUILD_BUG_ON(UFFD_CLOEXEC != O_CLOEXEC);
BUILD_BUG_ON(UFFD_NONBLOCK != O_NONBLOCK);
userfaultfd: add UFFD_USER_MODE_ONLY Patch series "Control over userfaultfd kernel-fault handling", v6. This patch series is split from [1]. The other series enables SELinux support for userfaultfd file descriptors so that its creation and movement can be controlled. It has been demonstrated on various occasions that suspending kernel code execution for an arbitrary amount of time at any access to userspace memory (copy_from_user()/copy_to_user()/...) can be exploited to change the intended behavior of the kernel. For instance, handling page faults in kernel-mode using userfaultfd has been exploited in [2, 3]. Likewise, FUSE, which is similar to userfaultfd in this respect, has been exploited in [4, 5] for similar outcome. This small patch series adds a new flag to userfaultfd(2) that allows callers to give up the ability to handle kernel-mode faults with the resulting UFFD file object. It then adds a 'user-mode only' option to the unprivileged_userfaultfd sysctl knob to require unprivileged callers to use this new flag. The purpose of this new interface is to decrease the chance of an unprivileged userfaultfd user taking advantage of userfaultfd to enhance security vulnerabilities by lengthening the race window in kernel code. [1] https://lore.kernel.org/lkml/20200211225547.235083-1-dancol@google.com/ [2] https://duasynt.com/blog/linux-kernel-heap-spray [3] https://duasynt.com/blog/cve-2016-6187-heap-off-by-one-exploit [4] https://googleprojectzero.blogspot.com/2016/06/exploiting-recursion-in-linux-kernel_20.html [5] https://bugs.chromium.org/p/project-zero/issues/detail?id=808 This patch (of 2): userfaultfd handles page faults from both user and kernel code. Add a new UFFD_USER_MODE_ONLY flag for userfaultfd(2) that makes the resulting userfaultfd object refuse to handle faults from kernel mode, treating these faults as if SIGBUS were always raised, causing the kernel code to fail with EFAULT. A future patch adds a knob allowing administrators to give some processes the ability to create userfaultfd file objects only if they pass UFFD_USER_MODE_ONLY, reducing the likelihood that these processes will exploit userfaultfd's ability to delay kernel page faults to open timing windows for future exploits. Link: https://lkml.kernel.org/r/20201120030411.2690816-1-lokeshgidra@google.com Link: https://lkml.kernel.org/r/20201120030411.2690816-2-lokeshgidra@google.com Signed-off-by: Daniel Colascione <dancol@google.com> Signed-off-by: Lokesh Gidra <lokeshgidra@google.com> Reviewed-by: Andrea Arcangeli <aarcange@redhat.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: <calin@google.com> Cc: Daniel Colascione <dancol@dancol.org> Cc: Eric Biggers <ebiggers@kernel.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Jeff Vander Stoep <jeffv@google.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Joel Fernandes (Google)" <joel@joelfernandes.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kalesh Singh <kaleshsingh@google.com> Cc: Kees Cook <keescook@chromium.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Nitin Gupta <nigupta@nvidia.com> Cc: Peter Xu <peterx@redhat.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Shaohua Li <shli@fb.com> Cc: Stephen Smalley <stephen.smalley.work@gmail.com> Cc: Suren Baghdasaryan <surenb@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-12-15 06:13:49 +03:00
if (flags & ~(UFFD_SHARED_FCNTL_FLAGS | UFFD_USER_MODE_ONLY))
return -EINVAL;
ctx = kmem_cache_alloc(userfaultfd_ctx_cachep, GFP_KERNEL);
if (!ctx)
return -ENOMEM;
refcount_set(&ctx->refcount, 1);
ctx->flags = flags;
ctx->features = 0;
ctx->released = false;
userfaultfd: change mmap_changing to atomic Patch series "userfaultfd: minor bug fixes". Three unrelated bug fixes. The first two addresses possible issues (not too theoretical ones), but I did not encounter them in practice. The third patch addresses a test bug that causes the test to fail on my system. It has been sent before as part of a bigger RFC. This patch (of 3): mmap_changing is currently a boolean variable, which is set and cleared without any lock that protects against concurrent modifications. mmap_changing is supposed to mark whether userfaultfd page-faults handling should be retried since mappings are undergoing a change. However, concurrent calls, for instance to madvise(MADV_DONTNEED), might cause mmap_changing to be false, although the remove event was still not read (hence acknowledged) by the user. Change mmap_changing to atomic_t and increase/decrease appropriately. Add a debug assertion to see whether mmap_changing is negative. Link: https://lkml.kernel.org/r/20210808020724.1022515-1-namit@vmware.com Link: https://lkml.kernel.org/r/20210808020724.1022515-2-namit@vmware.com Fixes: df2cc96e77011 ("userfaultfd: prevent non-cooperative events vs mcopy_atomic races") Signed-off-by: Nadav Amit <namit@vmware.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Peter Xu <peterx@redhat.com> Cc: Axel Rasmussen <axelrasmussen@google.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03 00:58:56 +03:00
atomic_set(&ctx->mmap_changing, 0);
ctx->mm = current->mm;
/* prevent the mm struct to be freed */
mmgrab(ctx->mm);
fd = anon_inode_getfd_secure("[userfaultfd]", &userfaultfd_fops, ctx,
O_RDWR | (flags & UFFD_SHARED_FCNTL_FLAGS), NULL);
if (fd < 0) {
mmdrop(ctx->mm);
kmem_cache_free(userfaultfd_ctx_cachep, ctx);
}
return fd;
}
static int __init userfaultfd_init(void)
{
userfaultfd_ctx_cachep = kmem_cache_create("userfaultfd_ctx_cache",
sizeof(struct userfaultfd_ctx),
0,
SLAB_HWCACHE_ALIGN|SLAB_PANIC,
init_once_userfaultfd_ctx);
return 0;
}
__initcall(userfaultfd_init);