WSL2-Linux-Kernel/fs/xfs/xfs_attr_remote.c

551 строка
13 KiB
C
Исходник Обычный вид История

/*
* Copyright (c) 2000-2005 Silicon Graphics, Inc.
xfs: add CRC protection to remote attributes There are two ways of doing this - the first is to add a CRC to the remote attribute entry in the attribute block. The second is to treat them similar to the remote symlink, where each fragment has it's own header and identifies fragment location in the attribute. The problem with the CRC in the remote attr entry is that we cannot identify the owner of the metadata from the metadata blocks themselves, or where the blocks fit into the remote attribute. The down side to this approach is that we never know when the attribute has been read from disk or not and so we have to verify it every time it is read, and we must calculate it during the create transaction and log it. We do not log CRCs for any other metadata, and so this creates a unique set of coherency problems that, in general, are best avoided. Adding an identifying header to each allocated block allows us to identify each fragment and where in the attribute it is located. It enables us to rebuild the remote attribute from just the raw blocks containing the attribute. It also provides us to do per-block CRCs verification at IO time rather than during the transaction context that creates it or every time it is read into a user buffer. Hence it avoids all the problems that an external, logged CRC has, and provides all the benefits of self identifying metadata. The only complexity is that we have to add a header per fragment, and we don't know how many fragments will be needed prior to allocations. If we take the symlink example, the header is 56 bytes and hence for a 4k block size filesystem, in the worst case 16 headers requires 1 extra block for the 64k attribute data. For 512 byte filesystems the worst case is an extra block for every 9 fragments (i.e. 16 extra blocks in the worse case). This will be very rare and so it's not really a major concern. Because allocation is done in two steps - the first finds a hole large enough in the attribute file, the second does the allocation - we only need to find a hole big enough for a worst case allocation. We only need to allocate enough extra blocks for number of headers required by the fragments, and we can calculate that as we go.... Hence it really only makes sense to use the same model as for symlinks - it doesn't add that much complexity, does not require an attribute tree format change, and does not require logging calculated CRC values. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-03 09:11:28 +04:00
* Copyright (c) 2013 Red Hat, Inc.
* All Rights Reserved.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it would be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write the Free Software Foundation,
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "xfs.h"
#include "xfs_fs.h"
#include "xfs_types.h"
#include "xfs_bit.h"
#include "xfs_log.h"
#include "xfs_trans.h"
#include "xfs_sb.h"
#include "xfs_ag.h"
#include "xfs_mount.h"
#include "xfs_error.h"
#include "xfs_da_btree.h"
#include "xfs_bmap_btree.h"
#include "xfs_dinode.h"
#include "xfs_inode.h"
#include "xfs_alloc.h"
#include "xfs_inode_item.h"
#include "xfs_bmap.h"
#include "xfs_attr.h"
#include "xfs_attr_leaf.h"
#include "xfs_attr_remote.h"
#include "xfs_trans_space.h"
#include "xfs_trace.h"
xfs: add CRC protection to remote attributes There are two ways of doing this - the first is to add a CRC to the remote attribute entry in the attribute block. The second is to treat them similar to the remote symlink, where each fragment has it's own header and identifies fragment location in the attribute. The problem with the CRC in the remote attr entry is that we cannot identify the owner of the metadata from the metadata blocks themselves, or where the blocks fit into the remote attribute. The down side to this approach is that we never know when the attribute has been read from disk or not and so we have to verify it every time it is read, and we must calculate it during the create transaction and log it. We do not log CRCs for any other metadata, and so this creates a unique set of coherency problems that, in general, are best avoided. Adding an identifying header to each allocated block allows us to identify each fragment and where in the attribute it is located. It enables us to rebuild the remote attribute from just the raw blocks containing the attribute. It also provides us to do per-block CRCs verification at IO time rather than during the transaction context that creates it or every time it is read into a user buffer. Hence it avoids all the problems that an external, logged CRC has, and provides all the benefits of self identifying metadata. The only complexity is that we have to add a header per fragment, and we don't know how many fragments will be needed prior to allocations. If we take the symlink example, the header is 56 bytes and hence for a 4k block size filesystem, in the worst case 16 headers requires 1 extra block for the 64k attribute data. For 512 byte filesystems the worst case is an extra block for every 9 fragments (i.e. 16 extra blocks in the worse case). This will be very rare and so it's not really a major concern. Because allocation is done in two steps - the first finds a hole large enough in the attribute file, the second does the allocation - we only need to find a hole big enough for a worst case allocation. We only need to allocate enough extra blocks for number of headers required by the fragments, and we can calculate that as we go.... Hence it really only makes sense to use the same model as for symlinks - it doesn't add that much complexity, does not require an attribute tree format change, and does not require logging calculated CRC values. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-03 09:11:28 +04:00
#include "xfs_cksum.h"
#include "xfs_buf_item.h"
#define ATTR_RMTVALUE_MAPSIZE 1 /* # of map entries at once */
xfs: add CRC protection to remote attributes There are two ways of doing this - the first is to add a CRC to the remote attribute entry in the attribute block. The second is to treat them similar to the remote symlink, where each fragment has it's own header and identifies fragment location in the attribute. The problem with the CRC in the remote attr entry is that we cannot identify the owner of the metadata from the metadata blocks themselves, or where the blocks fit into the remote attribute. The down side to this approach is that we never know when the attribute has been read from disk or not and so we have to verify it every time it is read, and we must calculate it during the create transaction and log it. We do not log CRCs for any other metadata, and so this creates a unique set of coherency problems that, in general, are best avoided. Adding an identifying header to each allocated block allows us to identify each fragment and where in the attribute it is located. It enables us to rebuild the remote attribute from just the raw blocks containing the attribute. It also provides us to do per-block CRCs verification at IO time rather than during the transaction context that creates it or every time it is read into a user buffer. Hence it avoids all the problems that an external, logged CRC has, and provides all the benefits of self identifying metadata. The only complexity is that we have to add a header per fragment, and we don't know how many fragments will be needed prior to allocations. If we take the symlink example, the header is 56 bytes and hence for a 4k block size filesystem, in the worst case 16 headers requires 1 extra block for the 64k attribute data. For 512 byte filesystems the worst case is an extra block for every 9 fragments (i.e. 16 extra blocks in the worse case). This will be very rare and so it's not really a major concern. Because allocation is done in two steps - the first finds a hole large enough in the attribute file, the second does the allocation - we only need to find a hole big enough for a worst case allocation. We only need to allocate enough extra blocks for number of headers required by the fragments, and we can calculate that as we go.... Hence it really only makes sense to use the same model as for symlinks - it doesn't add that much complexity, does not require an attribute tree format change, and does not require logging calculated CRC values. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-03 09:11:28 +04:00
/*
* Each contiguous block has a header, so it is not just a simple attribute
* length to FSB conversion.
*/
static int
xfs_attr3_rmt_blocks(
struct xfs_mount *mp,
int attrlen)
{
int fsblocks = 0;
int len = attrlen;
do {
fsblocks++;
len -= XFS_ATTR3_RMT_BUF_SPACE(mp, mp->m_sb.sb_blocksize);
} while (len > 0);
return fsblocks;
}
static bool
xfs_attr3_rmt_verify(
struct xfs_buf *bp)
{
struct xfs_mount *mp = bp->b_target->bt_mount;
struct xfs_attr3_rmt_hdr *rmt = bp->b_addr;
if (!xfs_sb_version_hascrc(&mp->m_sb))
return false;
if (rmt->rm_magic != cpu_to_be32(XFS_ATTR3_RMT_MAGIC))
return false;
if (!uuid_equal(&rmt->rm_uuid, &mp->m_sb.sb_uuid))
return false;
if (bp->b_bn != be64_to_cpu(rmt->rm_blkno))
return false;
if (be32_to_cpu(rmt->rm_offset) +
be32_to_cpu(rmt->rm_bytes) >= MAXPATHLEN)
return false;
if (rmt->rm_owner == 0)
return false;
return true;
}
static void
xfs_attr3_rmt_read_verify(
struct xfs_buf *bp)
{
struct xfs_mount *mp = bp->b_target->bt_mount;
/* no verification of non-crc buffers */
if (!xfs_sb_version_hascrc(&mp->m_sb))
return;
if (!xfs_verify_cksum(bp->b_addr, BBTOB(bp->b_length),
XFS_ATTR3_RMT_CRC_OFF) ||
!xfs_attr3_rmt_verify(bp)) {
XFS_CORRUPTION_ERROR(__func__, XFS_ERRLEVEL_LOW, mp, bp->b_addr);
xfs_buf_ioerror(bp, EFSCORRUPTED);
}
}
static void
xfs_attr3_rmt_write_verify(
struct xfs_buf *bp)
{
struct xfs_mount *mp = bp->b_target->bt_mount;
struct xfs_buf_log_item *bip = bp->b_fspriv;
/* no verification of non-crc buffers */
if (!xfs_sb_version_hascrc(&mp->m_sb))
return;
if (!xfs_attr3_rmt_verify(bp)) {
XFS_CORRUPTION_ERROR(__func__, XFS_ERRLEVEL_LOW, mp, bp->b_addr);
xfs_buf_ioerror(bp, EFSCORRUPTED);
return;
}
if (bip) {
struct xfs_attr3_rmt_hdr *rmt = bp->b_addr;
rmt->rm_lsn = cpu_to_be64(bip->bli_item.li_lsn);
}
xfs_update_cksum(bp->b_addr, BBTOB(bp->b_length),
XFS_ATTR3_RMT_CRC_OFF);
}
const struct xfs_buf_ops xfs_attr3_rmt_buf_ops = {
.verify_read = xfs_attr3_rmt_read_verify,
.verify_write = xfs_attr3_rmt_write_verify,
};
static int
xfs_attr3_rmt_hdr_set(
struct xfs_mount *mp,
xfs_ino_t ino,
uint32_t offset,
uint32_t size,
struct xfs_buf *bp)
{
struct xfs_attr3_rmt_hdr *rmt = bp->b_addr;
if (!xfs_sb_version_hascrc(&mp->m_sb))
return 0;
rmt->rm_magic = cpu_to_be32(XFS_ATTR3_RMT_MAGIC);
rmt->rm_offset = cpu_to_be32(offset);
rmt->rm_bytes = cpu_to_be32(size);
uuid_copy(&rmt->rm_uuid, &mp->m_sb.sb_uuid);
rmt->rm_owner = cpu_to_be64(ino);
rmt->rm_blkno = cpu_to_be64(bp->b_bn);
bp->b_ops = &xfs_attr3_rmt_buf_ops;
return sizeof(struct xfs_attr3_rmt_hdr);
}
/*
* Checking of the remote attribute header is split into two parts. the verifier
* does CRC, location and bounds checking, the unpacking function checks the
* attribute parameters and owner.
*/
static bool
xfs_attr3_rmt_hdr_ok(
struct xfs_mount *mp,
xfs_ino_t ino,
uint32_t offset,
uint32_t size,
struct xfs_buf *bp)
{
struct xfs_attr3_rmt_hdr *rmt = bp->b_addr;
if (offset != be32_to_cpu(rmt->rm_offset))
return false;
if (size != be32_to_cpu(rmt->rm_bytes))
return false;
if (ino != be64_to_cpu(rmt->rm_owner))
return false;
/* ok */
return true;
}
/*
* Read the value associated with an attribute from the out-of-line buffer
* that we stored it in.
*/
int
xfs: add CRC protection to remote attributes There are two ways of doing this - the first is to add a CRC to the remote attribute entry in the attribute block. The second is to treat them similar to the remote symlink, where each fragment has it's own header and identifies fragment location in the attribute. The problem with the CRC in the remote attr entry is that we cannot identify the owner of the metadata from the metadata blocks themselves, or where the blocks fit into the remote attribute. The down side to this approach is that we never know when the attribute has been read from disk or not and so we have to verify it every time it is read, and we must calculate it during the create transaction and log it. We do not log CRCs for any other metadata, and so this creates a unique set of coherency problems that, in general, are best avoided. Adding an identifying header to each allocated block allows us to identify each fragment and where in the attribute it is located. It enables us to rebuild the remote attribute from just the raw blocks containing the attribute. It also provides us to do per-block CRCs verification at IO time rather than during the transaction context that creates it or every time it is read into a user buffer. Hence it avoids all the problems that an external, logged CRC has, and provides all the benefits of self identifying metadata. The only complexity is that we have to add a header per fragment, and we don't know how many fragments will be needed prior to allocations. If we take the symlink example, the header is 56 bytes and hence for a 4k block size filesystem, in the worst case 16 headers requires 1 extra block for the 64k attribute data. For 512 byte filesystems the worst case is an extra block for every 9 fragments (i.e. 16 extra blocks in the worse case). This will be very rare and so it's not really a major concern. Because allocation is done in two steps - the first finds a hole large enough in the attribute file, the second does the allocation - we only need to find a hole big enough for a worst case allocation. We only need to allocate enough extra blocks for number of headers required by the fragments, and we can calculate that as we go.... Hence it really only makes sense to use the same model as for symlinks - it doesn't add that much complexity, does not require an attribute tree format change, and does not require logging calculated CRC values. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-03 09:11:28 +04:00
xfs_attr_rmtval_get(
struct xfs_da_args *args)
{
xfs: add CRC protection to remote attributes There are two ways of doing this - the first is to add a CRC to the remote attribute entry in the attribute block. The second is to treat them similar to the remote symlink, where each fragment has it's own header and identifies fragment location in the attribute. The problem with the CRC in the remote attr entry is that we cannot identify the owner of the metadata from the metadata blocks themselves, or where the blocks fit into the remote attribute. The down side to this approach is that we never know when the attribute has been read from disk or not and so we have to verify it every time it is read, and we must calculate it during the create transaction and log it. We do not log CRCs for any other metadata, and so this creates a unique set of coherency problems that, in general, are best avoided. Adding an identifying header to each allocated block allows us to identify each fragment and where in the attribute it is located. It enables us to rebuild the remote attribute from just the raw blocks containing the attribute. It also provides us to do per-block CRCs verification at IO time rather than during the transaction context that creates it or every time it is read into a user buffer. Hence it avoids all the problems that an external, logged CRC has, and provides all the benefits of self identifying metadata. The only complexity is that we have to add a header per fragment, and we don't know how many fragments will be needed prior to allocations. If we take the symlink example, the header is 56 bytes and hence for a 4k block size filesystem, in the worst case 16 headers requires 1 extra block for the 64k attribute data. For 512 byte filesystems the worst case is an extra block for every 9 fragments (i.e. 16 extra blocks in the worse case). This will be very rare and so it's not really a major concern. Because allocation is done in two steps - the first finds a hole large enough in the attribute file, the second does the allocation - we only need to find a hole big enough for a worst case allocation. We only need to allocate enough extra blocks for number of headers required by the fragments, and we can calculate that as we go.... Hence it really only makes sense to use the same model as for symlinks - it doesn't add that much complexity, does not require an attribute tree format change, and does not require logging calculated CRC values. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-03 09:11:28 +04:00
struct xfs_bmbt_irec map[ATTR_RMTVALUE_MAPSIZE];
struct xfs_mount *mp = args->dp->i_mount;
struct xfs_buf *bp;
xfs_daddr_t dblkno;
xfs_dablk_t lblkno = args->rmtblkno;
void *dst = args->value;
int valuelen = args->valuelen;
int nmap;
int error;
int blkcnt;
int i;
int offset = 0;
trace_xfs_attr_rmtval_get(args);
ASSERT(!(args->flags & ATTR_KERNOVAL));
while (valuelen > 0) {
nmap = ATTR_RMTVALUE_MAPSIZE;
error = xfs_bmapi_read(args->dp, (xfs_fileoff_t)lblkno,
args->rmtblkcnt, map, &nmap,
XFS_BMAPI_ATTRFORK);
if (error)
xfs: add CRC protection to remote attributes There are two ways of doing this - the first is to add a CRC to the remote attribute entry in the attribute block. The second is to treat them similar to the remote symlink, where each fragment has it's own header and identifies fragment location in the attribute. The problem with the CRC in the remote attr entry is that we cannot identify the owner of the metadata from the metadata blocks themselves, or where the blocks fit into the remote attribute. The down side to this approach is that we never know when the attribute has been read from disk or not and so we have to verify it every time it is read, and we must calculate it during the create transaction and log it. We do not log CRCs for any other metadata, and so this creates a unique set of coherency problems that, in general, are best avoided. Adding an identifying header to each allocated block allows us to identify each fragment and where in the attribute it is located. It enables us to rebuild the remote attribute from just the raw blocks containing the attribute. It also provides us to do per-block CRCs verification at IO time rather than during the transaction context that creates it or every time it is read into a user buffer. Hence it avoids all the problems that an external, logged CRC has, and provides all the benefits of self identifying metadata. The only complexity is that we have to add a header per fragment, and we don't know how many fragments will be needed prior to allocations. If we take the symlink example, the header is 56 bytes and hence for a 4k block size filesystem, in the worst case 16 headers requires 1 extra block for the 64k attribute data. For 512 byte filesystems the worst case is an extra block for every 9 fragments (i.e. 16 extra blocks in the worse case). This will be very rare and so it's not really a major concern. Because allocation is done in two steps - the first finds a hole large enough in the attribute file, the second does the allocation - we only need to find a hole big enough for a worst case allocation. We only need to allocate enough extra blocks for number of headers required by the fragments, and we can calculate that as we go.... Hence it really only makes sense to use the same model as for symlinks - it doesn't add that much complexity, does not require an attribute tree format change, and does not require logging calculated CRC values. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-03 09:11:28 +04:00
return error;
ASSERT(nmap >= 1);
for (i = 0; (i < nmap) && (valuelen > 0); i++) {
xfs: add CRC protection to remote attributes There are two ways of doing this - the first is to add a CRC to the remote attribute entry in the attribute block. The second is to treat them similar to the remote symlink, where each fragment has it's own header and identifies fragment location in the attribute. The problem with the CRC in the remote attr entry is that we cannot identify the owner of the metadata from the metadata blocks themselves, or where the blocks fit into the remote attribute. The down side to this approach is that we never know when the attribute has been read from disk or not and so we have to verify it every time it is read, and we must calculate it during the create transaction and log it. We do not log CRCs for any other metadata, and so this creates a unique set of coherency problems that, in general, are best avoided. Adding an identifying header to each allocated block allows us to identify each fragment and where in the attribute it is located. It enables us to rebuild the remote attribute from just the raw blocks containing the attribute. It also provides us to do per-block CRCs verification at IO time rather than during the transaction context that creates it or every time it is read into a user buffer. Hence it avoids all the problems that an external, logged CRC has, and provides all the benefits of self identifying metadata. The only complexity is that we have to add a header per fragment, and we don't know how many fragments will be needed prior to allocations. If we take the symlink example, the header is 56 bytes and hence for a 4k block size filesystem, in the worst case 16 headers requires 1 extra block for the 64k attribute data. For 512 byte filesystems the worst case is an extra block for every 9 fragments (i.e. 16 extra blocks in the worse case). This will be very rare and so it's not really a major concern. Because allocation is done in two steps - the first finds a hole large enough in the attribute file, the second does the allocation - we only need to find a hole big enough for a worst case allocation. We only need to allocate enough extra blocks for number of headers required by the fragments, and we can calculate that as we go.... Hence it really only makes sense to use the same model as for symlinks - it doesn't add that much complexity, does not require an attribute tree format change, and does not require logging calculated CRC values. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-03 09:11:28 +04:00
int byte_cnt;
char *src;
ASSERT((map[i].br_startblock != DELAYSTARTBLOCK) &&
(map[i].br_startblock != HOLESTARTBLOCK));
dblkno = XFS_FSB_TO_DADDR(mp, map[i].br_startblock);
blkcnt = XFS_FSB_TO_BB(mp, map[i].br_blockcount);
error = xfs_trans_read_buf(mp, NULL, mp->m_ddev_targp,
xfs: add CRC protection to remote attributes There are two ways of doing this - the first is to add a CRC to the remote attribute entry in the attribute block. The second is to treat them similar to the remote symlink, where each fragment has it's own header and identifies fragment location in the attribute. The problem with the CRC in the remote attr entry is that we cannot identify the owner of the metadata from the metadata blocks themselves, or where the blocks fit into the remote attribute. The down side to this approach is that we never know when the attribute has been read from disk or not and so we have to verify it every time it is read, and we must calculate it during the create transaction and log it. We do not log CRCs for any other metadata, and so this creates a unique set of coherency problems that, in general, are best avoided. Adding an identifying header to each allocated block allows us to identify each fragment and where in the attribute it is located. It enables us to rebuild the remote attribute from just the raw blocks containing the attribute. It also provides us to do per-block CRCs verification at IO time rather than during the transaction context that creates it or every time it is read into a user buffer. Hence it avoids all the problems that an external, logged CRC has, and provides all the benefits of self identifying metadata. The only complexity is that we have to add a header per fragment, and we don't know how many fragments will be needed prior to allocations. If we take the symlink example, the header is 56 bytes and hence for a 4k block size filesystem, in the worst case 16 headers requires 1 extra block for the 64k attribute data. For 512 byte filesystems the worst case is an extra block for every 9 fragments (i.e. 16 extra blocks in the worse case). This will be very rare and so it's not really a major concern. Because allocation is done in two steps - the first finds a hole large enough in the attribute file, the second does the allocation - we only need to find a hole big enough for a worst case allocation. We only need to allocate enough extra blocks for number of headers required by the fragments, and we can calculate that as we go.... Hence it really only makes sense to use the same model as for symlinks - it doesn't add that much complexity, does not require an attribute tree format change, and does not require logging calculated CRC values. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-03 09:11:28 +04:00
dblkno, blkcnt, 0, &bp,
&xfs_attr3_rmt_buf_ops);
if (error)
xfs: add CRC protection to remote attributes There are two ways of doing this - the first is to add a CRC to the remote attribute entry in the attribute block. The second is to treat them similar to the remote symlink, where each fragment has it's own header and identifies fragment location in the attribute. The problem with the CRC in the remote attr entry is that we cannot identify the owner of the metadata from the metadata blocks themselves, or where the blocks fit into the remote attribute. The down side to this approach is that we never know when the attribute has been read from disk or not and so we have to verify it every time it is read, and we must calculate it during the create transaction and log it. We do not log CRCs for any other metadata, and so this creates a unique set of coherency problems that, in general, are best avoided. Adding an identifying header to each allocated block allows us to identify each fragment and where in the attribute it is located. It enables us to rebuild the remote attribute from just the raw blocks containing the attribute. It also provides us to do per-block CRCs verification at IO time rather than during the transaction context that creates it or every time it is read into a user buffer. Hence it avoids all the problems that an external, logged CRC has, and provides all the benefits of self identifying metadata. The only complexity is that we have to add a header per fragment, and we don't know how many fragments will be needed prior to allocations. If we take the symlink example, the header is 56 bytes and hence for a 4k block size filesystem, in the worst case 16 headers requires 1 extra block for the 64k attribute data. For 512 byte filesystems the worst case is an extra block for every 9 fragments (i.e. 16 extra blocks in the worse case). This will be very rare and so it's not really a major concern. Because allocation is done in two steps - the first finds a hole large enough in the attribute file, the second does the allocation - we only need to find a hole big enough for a worst case allocation. We only need to allocate enough extra blocks for number of headers required by the fragments, and we can calculate that as we go.... Hence it really only makes sense to use the same model as for symlinks - it doesn't add that much complexity, does not require an attribute tree format change, and does not require logging calculated CRC values. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-03 09:11:28 +04:00
return error;
byte_cnt = min_t(int, valuelen, BBTOB(bp->b_length));
byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, byte_cnt);
xfs: add CRC protection to remote attributes There are two ways of doing this - the first is to add a CRC to the remote attribute entry in the attribute block. The second is to treat them similar to the remote symlink, where each fragment has it's own header and identifies fragment location in the attribute. The problem with the CRC in the remote attr entry is that we cannot identify the owner of the metadata from the metadata blocks themselves, or where the blocks fit into the remote attribute. The down side to this approach is that we never know when the attribute has been read from disk or not and so we have to verify it every time it is read, and we must calculate it during the create transaction and log it. We do not log CRCs for any other metadata, and so this creates a unique set of coherency problems that, in general, are best avoided. Adding an identifying header to each allocated block allows us to identify each fragment and where in the attribute it is located. It enables us to rebuild the remote attribute from just the raw blocks containing the attribute. It also provides us to do per-block CRCs verification at IO time rather than during the transaction context that creates it or every time it is read into a user buffer. Hence it avoids all the problems that an external, logged CRC has, and provides all the benefits of self identifying metadata. The only complexity is that we have to add a header per fragment, and we don't know how many fragments will be needed prior to allocations. If we take the symlink example, the header is 56 bytes and hence for a 4k block size filesystem, in the worst case 16 headers requires 1 extra block for the 64k attribute data. For 512 byte filesystems the worst case is an extra block for every 9 fragments (i.e. 16 extra blocks in the worse case). This will be very rare and so it's not really a major concern. Because allocation is done in two steps - the first finds a hole large enough in the attribute file, the second does the allocation - we only need to find a hole big enough for a worst case allocation. We only need to allocate enough extra blocks for number of headers required by the fragments, and we can calculate that as we go.... Hence it really only makes sense to use the same model as for symlinks - it doesn't add that much complexity, does not require an attribute tree format change, and does not require logging calculated CRC values. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-03 09:11:28 +04:00
src = bp->b_addr;
if (xfs_sb_version_hascrc(&mp->m_sb)) {
if (!xfs_attr3_rmt_hdr_ok(mp, args->dp->i_ino,
offset, byte_cnt, bp)) {
xfs_alert(mp,
"remote attribute header does not match required off/len/owner (0x%x/Ox%x,0x%llx)",
offset, byte_cnt, args->dp->i_ino);
xfs_buf_relse(bp);
return EFSCORRUPTED;
}
src += sizeof(struct xfs_attr3_rmt_hdr);
}
memcpy(dst, src, byte_cnt);
xfs_buf_relse(bp);
xfs: add CRC protection to remote attributes There are two ways of doing this - the first is to add a CRC to the remote attribute entry in the attribute block. The second is to treat them similar to the remote symlink, where each fragment has it's own header and identifies fragment location in the attribute. The problem with the CRC in the remote attr entry is that we cannot identify the owner of the metadata from the metadata blocks themselves, or where the blocks fit into the remote attribute. The down side to this approach is that we never know when the attribute has been read from disk or not and so we have to verify it every time it is read, and we must calculate it during the create transaction and log it. We do not log CRCs for any other metadata, and so this creates a unique set of coherency problems that, in general, are best avoided. Adding an identifying header to each allocated block allows us to identify each fragment and where in the attribute it is located. It enables us to rebuild the remote attribute from just the raw blocks containing the attribute. It also provides us to do per-block CRCs verification at IO time rather than during the transaction context that creates it or every time it is read into a user buffer. Hence it avoids all the problems that an external, logged CRC has, and provides all the benefits of self identifying metadata. The only complexity is that we have to add a header per fragment, and we don't know how many fragments will be needed prior to allocations. If we take the symlink example, the header is 56 bytes and hence for a 4k block size filesystem, in the worst case 16 headers requires 1 extra block for the 64k attribute data. For 512 byte filesystems the worst case is an extra block for every 9 fragments (i.e. 16 extra blocks in the worse case). This will be very rare and so it's not really a major concern. Because allocation is done in two steps - the first finds a hole large enough in the attribute file, the second does the allocation - we only need to find a hole big enough for a worst case allocation. We only need to allocate enough extra blocks for number of headers required by the fragments, and we can calculate that as we go.... Hence it really only makes sense to use the same model as for symlinks - it doesn't add that much complexity, does not require an attribute tree format change, and does not require logging calculated CRC values. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-03 09:11:28 +04:00
offset += byte_cnt;
dst += byte_cnt;
valuelen -= byte_cnt;
lblkno += map[i].br_blockcount;
}
}
ASSERT(valuelen == 0);
xfs: add CRC protection to remote attributes There are two ways of doing this - the first is to add a CRC to the remote attribute entry in the attribute block. The second is to treat them similar to the remote symlink, where each fragment has it's own header and identifies fragment location in the attribute. The problem with the CRC in the remote attr entry is that we cannot identify the owner of the metadata from the metadata blocks themselves, or where the blocks fit into the remote attribute. The down side to this approach is that we never know when the attribute has been read from disk or not and so we have to verify it every time it is read, and we must calculate it during the create transaction and log it. We do not log CRCs for any other metadata, and so this creates a unique set of coherency problems that, in general, are best avoided. Adding an identifying header to each allocated block allows us to identify each fragment and where in the attribute it is located. It enables us to rebuild the remote attribute from just the raw blocks containing the attribute. It also provides us to do per-block CRCs verification at IO time rather than during the transaction context that creates it or every time it is read into a user buffer. Hence it avoids all the problems that an external, logged CRC has, and provides all the benefits of self identifying metadata. The only complexity is that we have to add a header per fragment, and we don't know how many fragments will be needed prior to allocations. If we take the symlink example, the header is 56 bytes and hence for a 4k block size filesystem, in the worst case 16 headers requires 1 extra block for the 64k attribute data. For 512 byte filesystems the worst case is an extra block for every 9 fragments (i.e. 16 extra blocks in the worse case). This will be very rare and so it's not really a major concern. Because allocation is done in two steps - the first finds a hole large enough in the attribute file, the second does the allocation - we only need to find a hole big enough for a worst case allocation. We only need to allocate enough extra blocks for number of headers required by the fragments, and we can calculate that as we go.... Hence it really only makes sense to use the same model as for symlinks - it doesn't add that much complexity, does not require an attribute tree format change, and does not require logging calculated CRC values. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-03 09:11:28 +04:00
return 0;
}
/*
* Write the value associated with an attribute into the out-of-line buffer
* that we have defined for it.
*/
int
xfs: add CRC protection to remote attributes There are two ways of doing this - the first is to add a CRC to the remote attribute entry in the attribute block. The second is to treat them similar to the remote symlink, where each fragment has it's own header and identifies fragment location in the attribute. The problem with the CRC in the remote attr entry is that we cannot identify the owner of the metadata from the metadata blocks themselves, or where the blocks fit into the remote attribute. The down side to this approach is that we never know when the attribute has been read from disk or not and so we have to verify it every time it is read, and we must calculate it during the create transaction and log it. We do not log CRCs for any other metadata, and so this creates a unique set of coherency problems that, in general, are best avoided. Adding an identifying header to each allocated block allows us to identify each fragment and where in the attribute it is located. It enables us to rebuild the remote attribute from just the raw blocks containing the attribute. It also provides us to do per-block CRCs verification at IO time rather than during the transaction context that creates it or every time it is read into a user buffer. Hence it avoids all the problems that an external, logged CRC has, and provides all the benefits of self identifying metadata. The only complexity is that we have to add a header per fragment, and we don't know how many fragments will be needed prior to allocations. If we take the symlink example, the header is 56 bytes and hence for a 4k block size filesystem, in the worst case 16 headers requires 1 extra block for the 64k attribute data. For 512 byte filesystems the worst case is an extra block for every 9 fragments (i.e. 16 extra blocks in the worse case). This will be very rare and so it's not really a major concern. Because allocation is done in two steps - the first finds a hole large enough in the attribute file, the second does the allocation - we only need to find a hole big enough for a worst case allocation. We only need to allocate enough extra blocks for number of headers required by the fragments, and we can calculate that as we go.... Hence it really only makes sense to use the same model as for symlinks - it doesn't add that much complexity, does not require an attribute tree format change, and does not require logging calculated CRC values. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-03 09:11:28 +04:00
xfs_attr_rmtval_set(
struct xfs_da_args *args)
{
xfs: add CRC protection to remote attributes There are two ways of doing this - the first is to add a CRC to the remote attribute entry in the attribute block. The second is to treat them similar to the remote symlink, where each fragment has it's own header and identifies fragment location in the attribute. The problem with the CRC in the remote attr entry is that we cannot identify the owner of the metadata from the metadata blocks themselves, or where the blocks fit into the remote attribute. The down side to this approach is that we never know when the attribute has been read from disk or not and so we have to verify it every time it is read, and we must calculate it during the create transaction and log it. We do not log CRCs for any other metadata, and so this creates a unique set of coherency problems that, in general, are best avoided. Adding an identifying header to each allocated block allows us to identify each fragment and where in the attribute it is located. It enables us to rebuild the remote attribute from just the raw blocks containing the attribute. It also provides us to do per-block CRCs verification at IO time rather than during the transaction context that creates it or every time it is read into a user buffer. Hence it avoids all the problems that an external, logged CRC has, and provides all the benefits of self identifying metadata. The only complexity is that we have to add a header per fragment, and we don't know how many fragments will be needed prior to allocations. If we take the symlink example, the header is 56 bytes and hence for a 4k block size filesystem, in the worst case 16 headers requires 1 extra block for the 64k attribute data. For 512 byte filesystems the worst case is an extra block for every 9 fragments (i.e. 16 extra blocks in the worse case). This will be very rare and so it's not really a major concern. Because allocation is done in two steps - the first finds a hole large enough in the attribute file, the second does the allocation - we only need to find a hole big enough for a worst case allocation. We only need to allocate enough extra blocks for number of headers required by the fragments, and we can calculate that as we go.... Hence it really only makes sense to use the same model as for symlinks - it doesn't add that much complexity, does not require an attribute tree format change, and does not require logging calculated CRC values. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-03 09:11:28 +04:00
struct xfs_inode *dp = args->dp;
struct xfs_mount *mp = dp->i_mount;
struct xfs_bmbt_irec map;
struct xfs_buf *bp;
xfs_daddr_t dblkno;
xfs_dablk_t lblkno;
xfs_fileoff_t lfileoff = 0;
void *src = args->value;
int blkcnt;
int valuelen;
int nmap;
int error;
int hdrcnt = 0;
bool crcs = xfs_sb_version_hascrc(&mp->m_sb);
int offset = 0;
trace_xfs_attr_rmtval_set(args);
/*
* Find a "hole" in the attribute address space large enough for
xfs: add CRC protection to remote attributes There are two ways of doing this - the first is to add a CRC to the remote attribute entry in the attribute block. The second is to treat them similar to the remote symlink, where each fragment has it's own header and identifies fragment location in the attribute. The problem with the CRC in the remote attr entry is that we cannot identify the owner of the metadata from the metadata blocks themselves, or where the blocks fit into the remote attribute. The down side to this approach is that we never know when the attribute has been read from disk or not and so we have to verify it every time it is read, and we must calculate it during the create transaction and log it. We do not log CRCs for any other metadata, and so this creates a unique set of coherency problems that, in general, are best avoided. Adding an identifying header to each allocated block allows us to identify each fragment and where in the attribute it is located. It enables us to rebuild the remote attribute from just the raw blocks containing the attribute. It also provides us to do per-block CRCs verification at IO time rather than during the transaction context that creates it or every time it is read into a user buffer. Hence it avoids all the problems that an external, logged CRC has, and provides all the benefits of self identifying metadata. The only complexity is that we have to add a header per fragment, and we don't know how many fragments will be needed prior to allocations. If we take the symlink example, the header is 56 bytes and hence for a 4k block size filesystem, in the worst case 16 headers requires 1 extra block for the 64k attribute data. For 512 byte filesystems the worst case is an extra block for every 9 fragments (i.e. 16 extra blocks in the worse case). This will be very rare and so it's not really a major concern. Because allocation is done in two steps - the first finds a hole large enough in the attribute file, the second does the allocation - we only need to find a hole big enough for a worst case allocation. We only need to allocate enough extra blocks for number of headers required by the fragments, and we can calculate that as we go.... Hence it really only makes sense to use the same model as for symlinks - it doesn't add that much complexity, does not require an attribute tree format change, and does not require logging calculated CRC values. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-03 09:11:28 +04:00
* us to drop the new attribute's value into. Because CRC enable
* attributes have headers, we can't just do a straight byte to FSB
* conversion. We calculate the worst case block count in this case
* and we may not need that many, so we have to handle this when
* allocating the blocks below.
*/
xfs: add CRC protection to remote attributes There are two ways of doing this - the first is to add a CRC to the remote attribute entry in the attribute block. The second is to treat them similar to the remote symlink, where each fragment has it's own header and identifies fragment location in the attribute. The problem with the CRC in the remote attr entry is that we cannot identify the owner of the metadata from the metadata blocks themselves, or where the blocks fit into the remote attribute. The down side to this approach is that we never know when the attribute has been read from disk or not and so we have to verify it every time it is read, and we must calculate it during the create transaction and log it. We do not log CRCs for any other metadata, and so this creates a unique set of coherency problems that, in general, are best avoided. Adding an identifying header to each allocated block allows us to identify each fragment and where in the attribute it is located. It enables us to rebuild the remote attribute from just the raw blocks containing the attribute. It also provides us to do per-block CRCs verification at IO time rather than during the transaction context that creates it or every time it is read into a user buffer. Hence it avoids all the problems that an external, logged CRC has, and provides all the benefits of self identifying metadata. The only complexity is that we have to add a header per fragment, and we don't know how many fragments will be needed prior to allocations. If we take the symlink example, the header is 56 bytes and hence for a 4k block size filesystem, in the worst case 16 headers requires 1 extra block for the 64k attribute data. For 512 byte filesystems the worst case is an extra block for every 9 fragments (i.e. 16 extra blocks in the worse case). This will be very rare and so it's not really a major concern. Because allocation is done in two steps - the first finds a hole large enough in the attribute file, the second does the allocation - we only need to find a hole big enough for a worst case allocation. We only need to allocate enough extra blocks for number of headers required by the fragments, and we can calculate that as we go.... Hence it really only makes sense to use the same model as for symlinks - it doesn't add that much complexity, does not require an attribute tree format change, and does not require logging calculated CRC values. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-03 09:11:28 +04:00
if (!crcs)
blkcnt = XFS_B_TO_FSB(mp, args->valuelen);
else
blkcnt = xfs_attr3_rmt_blocks(mp, args->valuelen);
error = xfs_bmap_first_unused(args->trans, args->dp, blkcnt, &lfileoff,
XFS_ATTR_FORK);
xfs: add CRC protection to remote attributes There are two ways of doing this - the first is to add a CRC to the remote attribute entry in the attribute block. The second is to treat them similar to the remote symlink, where each fragment has it's own header and identifies fragment location in the attribute. The problem with the CRC in the remote attr entry is that we cannot identify the owner of the metadata from the metadata blocks themselves, or where the blocks fit into the remote attribute. The down side to this approach is that we never know when the attribute has been read from disk or not and so we have to verify it every time it is read, and we must calculate it during the create transaction and log it. We do not log CRCs for any other metadata, and so this creates a unique set of coherency problems that, in general, are best avoided. Adding an identifying header to each allocated block allows us to identify each fragment and where in the attribute it is located. It enables us to rebuild the remote attribute from just the raw blocks containing the attribute. It also provides us to do per-block CRCs verification at IO time rather than during the transaction context that creates it or every time it is read into a user buffer. Hence it avoids all the problems that an external, logged CRC has, and provides all the benefits of self identifying metadata. The only complexity is that we have to add a header per fragment, and we don't know how many fragments will be needed prior to allocations. If we take the symlink example, the header is 56 bytes and hence for a 4k block size filesystem, in the worst case 16 headers requires 1 extra block for the 64k attribute data. For 512 byte filesystems the worst case is an extra block for every 9 fragments (i.e. 16 extra blocks in the worse case). This will be very rare and so it's not really a major concern. Because allocation is done in two steps - the first finds a hole large enough in the attribute file, the second does the allocation - we only need to find a hole big enough for a worst case allocation. We only need to allocate enough extra blocks for number of headers required by the fragments, and we can calculate that as we go.... Hence it really only makes sense to use the same model as for symlinks - it doesn't add that much complexity, does not require an attribute tree format change, and does not require logging calculated CRC values. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-03 09:11:28 +04:00
if (error)
return error;
/* Start with the attribute data. We'll allocate the rest afterwards. */
if (crcs)
blkcnt = XFS_B_TO_FSB(mp, args->valuelen);
args->rmtblkno = lblkno = (xfs_dablk_t)lfileoff;
args->rmtblkcnt = blkcnt;
/*
* Roll through the "value", allocating blocks on disk as required.
*/
while (blkcnt > 0) {
xfs: add CRC protection to remote attributes There are two ways of doing this - the first is to add a CRC to the remote attribute entry in the attribute block. The second is to treat them similar to the remote symlink, where each fragment has it's own header and identifies fragment location in the attribute. The problem with the CRC in the remote attr entry is that we cannot identify the owner of the metadata from the metadata blocks themselves, or where the blocks fit into the remote attribute. The down side to this approach is that we never know when the attribute has been read from disk or not and so we have to verify it every time it is read, and we must calculate it during the create transaction and log it. We do not log CRCs for any other metadata, and so this creates a unique set of coherency problems that, in general, are best avoided. Adding an identifying header to each allocated block allows us to identify each fragment and where in the attribute it is located. It enables us to rebuild the remote attribute from just the raw blocks containing the attribute. It also provides us to do per-block CRCs verification at IO time rather than during the transaction context that creates it or every time it is read into a user buffer. Hence it avoids all the problems that an external, logged CRC has, and provides all the benefits of self identifying metadata. The only complexity is that we have to add a header per fragment, and we don't know how many fragments will be needed prior to allocations. If we take the symlink example, the header is 56 bytes and hence for a 4k block size filesystem, in the worst case 16 headers requires 1 extra block for the 64k attribute data. For 512 byte filesystems the worst case is an extra block for every 9 fragments (i.e. 16 extra blocks in the worse case). This will be very rare and so it's not really a major concern. Because allocation is done in two steps - the first finds a hole large enough in the attribute file, the second does the allocation - we only need to find a hole big enough for a worst case allocation. We only need to allocate enough extra blocks for number of headers required by the fragments, and we can calculate that as we go.... Hence it really only makes sense to use the same model as for symlinks - it doesn't add that much complexity, does not require an attribute tree format change, and does not require logging calculated CRC values. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-03 09:11:28 +04:00
int committed;
/*
* Allocate a single extent, up to the size of the value.
*/
xfs_bmap_init(args->flist, args->firstblock);
nmap = 1;
error = xfs_bmapi_write(args->trans, dp, (xfs_fileoff_t)lblkno,
blkcnt,
XFS_BMAPI_ATTRFORK | XFS_BMAPI_METADATA,
args->firstblock, args->total, &map, &nmap,
args->flist);
if (!error) {
error = xfs_bmap_finish(&args->trans, args->flist,
&committed);
}
if (error) {
ASSERT(committed);
args->trans = NULL;
xfs_bmap_cancel(args->flist);
return(error);
}
/*
* bmap_finish() may have committed the last trans and started
* a new one. We need the inode to be in all transactions.
*/
if (committed)
xfs_trans_ijoin(args->trans, dp, 0);
ASSERT(nmap == 1);
ASSERT((map.br_startblock != DELAYSTARTBLOCK) &&
(map.br_startblock != HOLESTARTBLOCK));
lblkno += map.br_blockcount;
blkcnt -= map.br_blockcount;
xfs: add CRC protection to remote attributes There are two ways of doing this - the first is to add a CRC to the remote attribute entry in the attribute block. The second is to treat them similar to the remote symlink, where each fragment has it's own header and identifies fragment location in the attribute. The problem with the CRC in the remote attr entry is that we cannot identify the owner of the metadata from the metadata blocks themselves, or where the blocks fit into the remote attribute. The down side to this approach is that we never know when the attribute has been read from disk or not and so we have to verify it every time it is read, and we must calculate it during the create transaction and log it. We do not log CRCs for any other metadata, and so this creates a unique set of coherency problems that, in general, are best avoided. Adding an identifying header to each allocated block allows us to identify each fragment and where in the attribute it is located. It enables us to rebuild the remote attribute from just the raw blocks containing the attribute. It also provides us to do per-block CRCs verification at IO time rather than during the transaction context that creates it or every time it is read into a user buffer. Hence it avoids all the problems that an external, logged CRC has, and provides all the benefits of self identifying metadata. The only complexity is that we have to add a header per fragment, and we don't know how many fragments will be needed prior to allocations. If we take the symlink example, the header is 56 bytes and hence for a 4k block size filesystem, in the worst case 16 headers requires 1 extra block for the 64k attribute data. For 512 byte filesystems the worst case is an extra block for every 9 fragments (i.e. 16 extra blocks in the worse case). This will be very rare and so it's not really a major concern. Because allocation is done in two steps - the first finds a hole large enough in the attribute file, the second does the allocation - we only need to find a hole big enough for a worst case allocation. We only need to allocate enough extra blocks for number of headers required by the fragments, and we can calculate that as we go.... Hence it really only makes sense to use the same model as for symlinks - it doesn't add that much complexity, does not require an attribute tree format change, and does not require logging calculated CRC values. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-03 09:11:28 +04:00
hdrcnt++;
/*
* If we have enough blocks for the attribute data, calculate
* how many extra blocks we need for headers. We might run
* through this multiple times in the case that the additional
* headers in the blocks needed for the data fragments spills
* into requiring more blocks. e.g. for 512 byte blocks, we'll
* spill for another block every 9 headers we require in this
* loop.
*/
if (crcs && blkcnt == 0) {
int total_len;
total_len = args->valuelen +
hdrcnt * sizeof(struct xfs_attr3_rmt_hdr);
blkcnt = XFS_B_TO_FSB(mp, total_len);
blkcnt -= args->rmtblkcnt;
args->rmtblkcnt += blkcnt;
}
/*
* Start the next trans in the chain.
*/
error = xfs_trans_roll(&args->trans, dp);
if (error)
return (error);
}
/*
* Roll through the "value", copying the attribute value to the
* already-allocated blocks. Blocks are written synchronously
* so that we can know they are all on disk before we turn off
* the INCOMPLETE flag.
*/
lblkno = args->rmtblkno;
valuelen = args->valuelen;
while (valuelen > 0) {
xfs: add CRC protection to remote attributes There are two ways of doing this - the first is to add a CRC to the remote attribute entry in the attribute block. The second is to treat them similar to the remote symlink, where each fragment has it's own header and identifies fragment location in the attribute. The problem with the CRC in the remote attr entry is that we cannot identify the owner of the metadata from the metadata blocks themselves, or where the blocks fit into the remote attribute. The down side to this approach is that we never know when the attribute has been read from disk or not and so we have to verify it every time it is read, and we must calculate it during the create transaction and log it. We do not log CRCs for any other metadata, and so this creates a unique set of coherency problems that, in general, are best avoided. Adding an identifying header to each allocated block allows us to identify each fragment and where in the attribute it is located. It enables us to rebuild the remote attribute from just the raw blocks containing the attribute. It also provides us to do per-block CRCs verification at IO time rather than during the transaction context that creates it or every time it is read into a user buffer. Hence it avoids all the problems that an external, logged CRC has, and provides all the benefits of self identifying metadata. The only complexity is that we have to add a header per fragment, and we don't know how many fragments will be needed prior to allocations. If we take the symlink example, the header is 56 bytes and hence for a 4k block size filesystem, in the worst case 16 headers requires 1 extra block for the 64k attribute data. For 512 byte filesystems the worst case is an extra block for every 9 fragments (i.e. 16 extra blocks in the worse case). This will be very rare and so it's not really a major concern. Because allocation is done in two steps - the first finds a hole large enough in the attribute file, the second does the allocation - we only need to find a hole big enough for a worst case allocation. We only need to allocate enough extra blocks for number of headers required by the fragments, and we can calculate that as we go.... Hence it really only makes sense to use the same model as for symlinks - it doesn't add that much complexity, does not require an attribute tree format change, and does not require logging calculated CRC values. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-03 09:11:28 +04:00
int byte_cnt;
char *buf;
/*
* Try to remember where we decided to put the value.
*/
xfs_bmap_init(args->flist, args->firstblock);
nmap = 1;
error = xfs_bmapi_read(dp, (xfs_fileoff_t)lblkno,
args->rmtblkcnt, &map, &nmap,
XFS_BMAPI_ATTRFORK);
if (error)
return(error);
ASSERT(nmap == 1);
ASSERT((map.br_startblock != DELAYSTARTBLOCK) &&
(map.br_startblock != HOLESTARTBLOCK));
dblkno = XFS_FSB_TO_DADDR(mp, map.br_startblock),
blkcnt = XFS_FSB_TO_BB(mp, map.br_blockcount);
bp = xfs_buf_get(mp->m_ddev_targp, dblkno, blkcnt, 0);
if (!bp)
return ENOMEM;
xfs: add CRC protection to remote attributes There are two ways of doing this - the first is to add a CRC to the remote attribute entry in the attribute block. The second is to treat them similar to the remote symlink, where each fragment has it's own header and identifies fragment location in the attribute. The problem with the CRC in the remote attr entry is that we cannot identify the owner of the metadata from the metadata blocks themselves, or where the blocks fit into the remote attribute. The down side to this approach is that we never know when the attribute has been read from disk or not and so we have to verify it every time it is read, and we must calculate it during the create transaction and log it. We do not log CRCs for any other metadata, and so this creates a unique set of coherency problems that, in general, are best avoided. Adding an identifying header to each allocated block allows us to identify each fragment and where in the attribute it is located. It enables us to rebuild the remote attribute from just the raw blocks containing the attribute. It also provides us to do per-block CRCs verification at IO time rather than during the transaction context that creates it or every time it is read into a user buffer. Hence it avoids all the problems that an external, logged CRC has, and provides all the benefits of self identifying metadata. The only complexity is that we have to add a header per fragment, and we don't know how many fragments will be needed prior to allocations. If we take the symlink example, the header is 56 bytes and hence for a 4k block size filesystem, in the worst case 16 headers requires 1 extra block for the 64k attribute data. For 512 byte filesystems the worst case is an extra block for every 9 fragments (i.e. 16 extra blocks in the worse case). This will be very rare and so it's not really a major concern. Because allocation is done in two steps - the first finds a hole large enough in the attribute file, the second does the allocation - we only need to find a hole big enough for a worst case allocation. We only need to allocate enough extra blocks for number of headers required by the fragments, and we can calculate that as we go.... Hence it really only makes sense to use the same model as for symlinks - it doesn't add that much complexity, does not require an attribute tree format change, and does not require logging calculated CRC values. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-03 09:11:28 +04:00
bp->b_ops = &xfs_attr3_rmt_buf_ops;
byte_cnt = BBTOB(bp->b_length);
byte_cnt = XFS_ATTR3_RMT_BUF_SPACE(mp, byte_cnt);
if (valuelen < byte_cnt) {
byte_cnt = valuelen;
}
buf = bp->b_addr;
buf += xfs_attr3_rmt_hdr_set(mp, dp->i_ino, offset,
byte_cnt, bp);
memcpy(buf, src, byte_cnt);
xfs: add CRC protection to remote attributes There are two ways of doing this - the first is to add a CRC to the remote attribute entry in the attribute block. The second is to treat them similar to the remote symlink, where each fragment has it's own header and identifies fragment location in the attribute. The problem with the CRC in the remote attr entry is that we cannot identify the owner of the metadata from the metadata blocks themselves, or where the blocks fit into the remote attribute. The down side to this approach is that we never know when the attribute has been read from disk or not and so we have to verify it every time it is read, and we must calculate it during the create transaction and log it. We do not log CRCs for any other metadata, and so this creates a unique set of coherency problems that, in general, are best avoided. Adding an identifying header to each allocated block allows us to identify each fragment and where in the attribute it is located. It enables us to rebuild the remote attribute from just the raw blocks containing the attribute. It also provides us to do per-block CRCs verification at IO time rather than during the transaction context that creates it or every time it is read into a user buffer. Hence it avoids all the problems that an external, logged CRC has, and provides all the benefits of self identifying metadata. The only complexity is that we have to add a header per fragment, and we don't know how many fragments will be needed prior to allocations. If we take the symlink example, the header is 56 bytes and hence for a 4k block size filesystem, in the worst case 16 headers requires 1 extra block for the 64k attribute data. For 512 byte filesystems the worst case is an extra block for every 9 fragments (i.e. 16 extra blocks in the worse case). This will be very rare and so it's not really a major concern. Because allocation is done in two steps - the first finds a hole large enough in the attribute file, the second does the allocation - we only need to find a hole big enough for a worst case allocation. We only need to allocate enough extra blocks for number of headers required by the fragments, and we can calculate that as we go.... Hence it really only makes sense to use the same model as for symlinks - it doesn't add that much complexity, does not require an attribute tree format change, and does not require logging calculated CRC values. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-03 09:11:28 +04:00
if (byte_cnt < BBTOB(bp->b_length))
xfs_buf_zero(bp, byte_cnt,
BBTOB(bp->b_length) - byte_cnt);
error = xfs_bwrite(bp); /* GROT: NOTE: synchronous write */
xfs_buf_relse(bp);
if (error)
return error;
xfs: add CRC protection to remote attributes There are two ways of doing this - the first is to add a CRC to the remote attribute entry in the attribute block. The second is to treat them similar to the remote symlink, where each fragment has it's own header and identifies fragment location in the attribute. The problem with the CRC in the remote attr entry is that we cannot identify the owner of the metadata from the metadata blocks themselves, or where the blocks fit into the remote attribute. The down side to this approach is that we never know when the attribute has been read from disk or not and so we have to verify it every time it is read, and we must calculate it during the create transaction and log it. We do not log CRCs for any other metadata, and so this creates a unique set of coherency problems that, in general, are best avoided. Adding an identifying header to each allocated block allows us to identify each fragment and where in the attribute it is located. It enables us to rebuild the remote attribute from just the raw blocks containing the attribute. It also provides us to do per-block CRCs verification at IO time rather than during the transaction context that creates it or every time it is read into a user buffer. Hence it avoids all the problems that an external, logged CRC has, and provides all the benefits of self identifying metadata. The only complexity is that we have to add a header per fragment, and we don't know how many fragments will be needed prior to allocations. If we take the symlink example, the header is 56 bytes and hence for a 4k block size filesystem, in the worst case 16 headers requires 1 extra block for the 64k attribute data. For 512 byte filesystems the worst case is an extra block for every 9 fragments (i.e. 16 extra blocks in the worse case). This will be very rare and so it's not really a major concern. Because allocation is done in two steps - the first finds a hole large enough in the attribute file, the second does the allocation - we only need to find a hole big enough for a worst case allocation. We only need to allocate enough extra blocks for number of headers required by the fragments, and we can calculate that as we go.... Hence it really only makes sense to use the same model as for symlinks - it doesn't add that much complexity, does not require an attribute tree format change, and does not require logging calculated CRC values. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-03 09:11:28 +04:00
src += byte_cnt;
valuelen -= byte_cnt;
offset += byte_cnt;
hdrcnt--;
lblkno += map.br_blockcount;
}
ASSERT(valuelen == 0);
xfs: add CRC protection to remote attributes There are two ways of doing this - the first is to add a CRC to the remote attribute entry in the attribute block. The second is to treat them similar to the remote symlink, where each fragment has it's own header and identifies fragment location in the attribute. The problem with the CRC in the remote attr entry is that we cannot identify the owner of the metadata from the metadata blocks themselves, or where the blocks fit into the remote attribute. The down side to this approach is that we never know when the attribute has been read from disk or not and so we have to verify it every time it is read, and we must calculate it during the create transaction and log it. We do not log CRCs for any other metadata, and so this creates a unique set of coherency problems that, in general, are best avoided. Adding an identifying header to each allocated block allows us to identify each fragment and where in the attribute it is located. It enables us to rebuild the remote attribute from just the raw blocks containing the attribute. It also provides us to do per-block CRCs verification at IO time rather than during the transaction context that creates it or every time it is read into a user buffer. Hence it avoids all the problems that an external, logged CRC has, and provides all the benefits of self identifying metadata. The only complexity is that we have to add a header per fragment, and we don't know how many fragments will be needed prior to allocations. If we take the symlink example, the header is 56 bytes and hence for a 4k block size filesystem, in the worst case 16 headers requires 1 extra block for the 64k attribute data. For 512 byte filesystems the worst case is an extra block for every 9 fragments (i.e. 16 extra blocks in the worse case). This will be very rare and so it's not really a major concern. Because allocation is done in two steps - the first finds a hole large enough in the attribute file, the second does the allocation - we only need to find a hole big enough for a worst case allocation. We only need to allocate enough extra blocks for number of headers required by the fragments, and we can calculate that as we go.... Hence it really only makes sense to use the same model as for symlinks - it doesn't add that much complexity, does not require an attribute tree format change, and does not require logging calculated CRC values. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-03 09:11:28 +04:00
ASSERT(hdrcnt == 0);
return 0;
}
/*
* Remove the value associated with an attribute by deleting the
* out-of-line buffer that it is stored on.
*/
int
xfs_attr_rmtval_remove(xfs_da_args_t *args)
{
xfs_mount_t *mp;
xfs_bmbt_irec_t map;
xfs_buf_t *bp;
xfs_daddr_t dblkno;
xfs_dablk_t lblkno;
int valuelen, blkcnt, nmap, error, done, committed;
trace_xfs_attr_rmtval_remove(args);
mp = args->dp->i_mount;
/*
* Roll through the "value", invalidating the attribute value's
* blocks.
*/
lblkno = args->rmtblkno;
valuelen = args->rmtblkcnt;
while (valuelen > 0) {
/*
* Try to remember where we decided to put the value.
*/
nmap = 1;
error = xfs_bmapi_read(args->dp, (xfs_fileoff_t)lblkno,
args->rmtblkcnt, &map, &nmap,
XFS_BMAPI_ATTRFORK);
if (error)
return(error);
ASSERT(nmap == 1);
ASSERT((map.br_startblock != DELAYSTARTBLOCK) &&
(map.br_startblock != HOLESTARTBLOCK));
dblkno = XFS_FSB_TO_DADDR(mp, map.br_startblock),
blkcnt = XFS_FSB_TO_BB(mp, map.br_blockcount);
/*
* If the "remote" value is in the cache, remove it.
*/
bp = xfs_incore(mp->m_ddev_targp, dblkno, blkcnt, XBF_TRYLOCK);
if (bp) {
xfs_buf_stale(bp);
xfs_buf_relse(bp);
bp = NULL;
}
valuelen -= map.br_blockcount;
lblkno += map.br_blockcount;
}
/*
* Keep de-allocating extents until the remote-value region is gone.
*/
lblkno = args->rmtblkno;
blkcnt = args->rmtblkcnt;
done = 0;
while (!done) {
xfs_bmap_init(args->flist, args->firstblock);
error = xfs_bunmapi(args->trans, args->dp, lblkno, blkcnt,
XFS_BMAPI_ATTRFORK | XFS_BMAPI_METADATA,
1, args->firstblock, args->flist,
&done);
if (!error) {
error = xfs_bmap_finish(&args->trans, args->flist,
&committed);
}
if (error) {
ASSERT(committed);
args->trans = NULL;
xfs_bmap_cancel(args->flist);
xfs: add CRC protection to remote attributes There are two ways of doing this - the first is to add a CRC to the remote attribute entry in the attribute block. The second is to treat them similar to the remote symlink, where each fragment has it's own header and identifies fragment location in the attribute. The problem with the CRC in the remote attr entry is that we cannot identify the owner of the metadata from the metadata blocks themselves, or where the blocks fit into the remote attribute. The down side to this approach is that we never know when the attribute has been read from disk or not and so we have to verify it every time it is read, and we must calculate it during the create transaction and log it. We do not log CRCs for any other metadata, and so this creates a unique set of coherency problems that, in general, are best avoided. Adding an identifying header to each allocated block allows us to identify each fragment and where in the attribute it is located. It enables us to rebuild the remote attribute from just the raw blocks containing the attribute. It also provides us to do per-block CRCs verification at IO time rather than during the transaction context that creates it or every time it is read into a user buffer. Hence it avoids all the problems that an external, logged CRC has, and provides all the benefits of self identifying metadata. The only complexity is that we have to add a header per fragment, and we don't know how many fragments will be needed prior to allocations. If we take the symlink example, the header is 56 bytes and hence for a 4k block size filesystem, in the worst case 16 headers requires 1 extra block for the 64k attribute data. For 512 byte filesystems the worst case is an extra block for every 9 fragments (i.e. 16 extra blocks in the worse case). This will be very rare and so it's not really a major concern. Because allocation is done in two steps - the first finds a hole large enough in the attribute file, the second does the allocation - we only need to find a hole big enough for a worst case allocation. We only need to allocate enough extra blocks for number of headers required by the fragments, and we can calculate that as we go.... Hence it really only makes sense to use the same model as for symlinks - it doesn't add that much complexity, does not require an attribute tree format change, and does not require logging calculated CRC values. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Ben Myers <bpm@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-04-03 09:11:28 +04:00
return error;
}
/*
* bmap_finish() may have committed the last trans and started
* a new one. We need the inode to be in all transactions.
*/
if (committed)
xfs_trans_ijoin(args->trans, args->dp, 0);
/*
* Close out trans and start the next one in the chain.
*/
error = xfs_trans_roll(&args->trans, args->dp);
if (error)
return (error);
}
return(0);
}