microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/Documentation/hwmon/ir38064.rst

67 строки
1.8 KiB
ReStructuredText
Исходник Обычный вид История

hwmon: (pmbus/ir38064) Add driver for Infineon IR38064 Voltage Regulator Add the pmbus driver for the Infineon ir38064 voltage regulator. VOUT_MODE is not supported by the device. The driver fakes linear16 mode with exponent value -8. The device supports VOUT_PEAK, IOUT_PEAK, and TEMPERATURE_PEAK, however this driver does not enable them. Signed-off-by: Maxim Sloyko <maxims@google.com> Signed-off-by: Patrick Venture <venture@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-04-12 23:37:56 +03:00
Kernel driver ir38064
=====================
Supported chips:
docs: hwmon: convert three docs to ReST format Those three new drivers were missed on the initial conversion to ReST format. So: - Rename them to .rst; - Add them to the hwmon index.rst index; - add some blank lines at the "Supported systems:" part, in order to allow Sphinx to properly identify new lines, suppressing warnings and avoid it to output some random lines in bold; - When multiple authors are involved, change the authors part to a list, in order to avoid adding blank lines. - adjust the table cells (one of the tables seemed to be assuming that tab is 4 positions instead of 8) and add the table markup. - be sure that the section markups have the same number of characters as the section title. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-04-22 20:39:37 +03:00
hwmon: (pmbus/ir38064) Add driver for Infineon IR38064 Voltage Regulator Add the pmbus driver for the Infineon ir38064 voltage regulator. VOUT_MODE is not supported by the device. The driver fakes linear16 mode with exponent value -8. The device supports VOUT_PEAK, IOUT_PEAK, and TEMPERATURE_PEAK, however this driver does not enable them. Signed-off-by: Maxim Sloyko <maxims@google.com> Signed-off-by: Patrick Venture <venture@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-04-12 23:37:56 +03:00
* Infineon IR38064
docs: hwmon: convert three docs to ReST format Those three new drivers were missed on the initial conversion to ReST format. So: - Rename them to .rst; - Add them to the hwmon index.rst index; - add some blank lines at the "Supported systems:" part, in order to allow Sphinx to properly identify new lines, suppressing warnings and avoid it to output some random lines in bold; - When multiple authors are involved, change the authors part to a list, in order to avoid adding blank lines. - adjust the table cells (one of the tables seemed to be assuming that tab is 4 positions instead of 8) and add the table markup. - be sure that the section markups have the same number of characters as the section title. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-04-22 20:39:37 +03:00
hwmon: (pmbus/ir38064) Add driver for Infineon IR38064 Voltage Regulator Add the pmbus driver for the Infineon ir38064 voltage regulator. VOUT_MODE is not supported by the device. The driver fakes linear16 mode with exponent value -8. The device supports VOUT_PEAK, IOUT_PEAK, and TEMPERATURE_PEAK, however this driver does not enable them. Signed-off-by: Maxim Sloyko <maxims@google.com> Signed-off-by: Patrick Venture <venture@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-04-12 23:37:56 +03:00
Prefix: 'ir38064'
Addresses scanned: -
docs: hwmon: convert three docs to ReST format Those three new drivers were missed on the initial conversion to ReST format. So: - Rename them to .rst; - Add them to the hwmon index.rst index; - add some blank lines at the "Supported systems:" part, in order to allow Sphinx to properly identify new lines, suppressing warnings and avoid it to output some random lines in bold; - When multiple authors are involved, change the authors part to a list, in order to avoid adding blank lines. - adjust the table cells (one of the tables seemed to be assuming that tab is 4 positions instead of 8) and add the table markup. - be sure that the section markups have the same number of characters as the section title. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-04-22 20:39:37 +03:00
hwmon: (pmbus/ir38064) Add driver for Infineon IR38064 Voltage Regulator Add the pmbus driver for the Infineon ir38064 voltage regulator. VOUT_MODE is not supported by the device. The driver fakes linear16 mode with exponent value -8. The device supports VOUT_PEAK, IOUT_PEAK, and TEMPERATURE_PEAK, however this driver does not enable them. Signed-off-by: Maxim Sloyko <maxims@google.com> Signed-off-by: Patrick Venture <venture@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-04-12 23:37:56 +03:00
Datasheet: Publicly available at the Infineon webiste
https://www.infineon.com/dgdl/Infineon-IR38064MTRPBF-DS-v03_07-EN.pdf?fileId=5546d462584d1d4a0158db0d9efb67ca
Authors:
docs: hwmon: convert three docs to ReST format Those three new drivers were missed on the initial conversion to ReST format. So: - Rename them to .rst; - Add them to the hwmon index.rst index; - add some blank lines at the "Supported systems:" part, in order to allow Sphinx to properly identify new lines, suppressing warnings and avoid it to output some random lines in bold; - When multiple authors are involved, change the authors part to a list, in order to avoid adding blank lines. - adjust the table cells (one of the tables seemed to be assuming that tab is 4 positions instead of 8) and add the table markup. - be sure that the section markups have the same number of characters as the section title. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-04-22 20:39:37 +03:00
- Maxim Sloyko <maxims@google.com>
- Patrick Venture <venture@google.com>
hwmon: (pmbus/ir38064) Add driver for Infineon IR38064 Voltage Regulator Add the pmbus driver for the Infineon ir38064 voltage regulator. VOUT_MODE is not supported by the device. The driver fakes linear16 mode with exponent value -8. The device supports VOUT_PEAK, IOUT_PEAK, and TEMPERATURE_PEAK, however this driver does not enable them. Signed-off-by: Maxim Sloyko <maxims@google.com> Signed-off-by: Patrick Venture <venture@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-04-12 23:37:56 +03:00
Description
-----------
IR38064 is a Single-input Voltage, Synchronous Buck Regulator, DC-DC Converter.
Usage Notes
-----------
This driver does not probe for PMBus devices. You will have to instantiate
devices explicitly.
Sysfs attributes
----------------
docs: hwmon: convert three docs to ReST format Those three new drivers were missed on the initial conversion to ReST format. So: - Rename them to .rst; - Add them to the hwmon index.rst index; - add some blank lines at the "Supported systems:" part, in order to allow Sphinx to properly identify new lines, suppressing warnings and avoid it to output some random lines in bold; - When multiple authors are involved, change the authors part to a list, in order to avoid adding blank lines. - adjust the table cells (one of the tables seemed to be assuming that tab is 4 positions instead of 8) and add the table markup. - be sure that the section markups have the same number of characters as the section title. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-04-22 20:39:37 +03:00
======================= ===========================
hwmon: (pmbus/ir38064) Add driver for Infineon IR38064 Voltage Regulator Add the pmbus driver for the Infineon ir38064 voltage regulator. VOUT_MODE is not supported by the device. The driver fakes linear16 mode with exponent value -8. The device supports VOUT_PEAK, IOUT_PEAK, and TEMPERATURE_PEAK, however this driver does not enable them. Signed-off-by: Maxim Sloyko <maxims@google.com> Signed-off-by: Patrick Venture <venture@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-04-12 23:37:56 +03:00
curr1_label "iout1"
curr1_input Measured output current
curr1_crit Critical maximum current
curr1_crit_alarm Current critical high alarm
curr1_max Maximum current
docs: hwmon: convert three docs to ReST format Those three new drivers were missed on the initial conversion to ReST format. So: - Rename them to .rst; - Add them to the hwmon index.rst index; - add some blank lines at the "Supported systems:" part, in order to allow Sphinx to properly identify new lines, suppressing warnings and avoid it to output some random lines in bold; - When multiple authors are involved, change the authors part to a list, in order to avoid adding blank lines. - adjust the table cells (one of the tables seemed to be assuming that tab is 4 positions instead of 8) and add the table markup. - be sure that the section markups have the same number of characters as the section title. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-04-22 20:39:37 +03:00
curr1_max_alarm Current high alarm
hwmon: (pmbus/ir38064) Add driver for Infineon IR38064 Voltage Regulator Add the pmbus driver for the Infineon ir38064 voltage regulator. VOUT_MODE is not supported by the device. The driver fakes linear16 mode with exponent value -8. The device supports VOUT_PEAK, IOUT_PEAK, and TEMPERATURE_PEAK, however this driver does not enable them. Signed-off-by: Maxim Sloyko <maxims@google.com> Signed-off-by: Patrick Venture <venture@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-04-12 23:37:56 +03:00
in1_label "vin"
in1_input Measured input voltage
in1_crit Critical maximum input voltage
in1_crit_alarm Input voltage critical high alarm
docs: hwmon: convert three docs to ReST format Those three new drivers were missed on the initial conversion to ReST format. So: - Rename them to .rst; - Add them to the hwmon index.rst index; - add some blank lines at the "Supported systems:" part, in order to allow Sphinx to properly identify new lines, suppressing warnings and avoid it to output some random lines in bold; - When multiple authors are involved, change the authors part to a list, in order to avoid adding blank lines. - adjust the table cells (one of the tables seemed to be assuming that tab is 4 positions instead of 8) and add the table markup. - be sure that the section markups have the same number of characters as the section title. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-04-22 20:39:37 +03:00
in1_min Minimum input voltage
hwmon: (pmbus/ir38064) Add driver for Infineon IR38064 Voltage Regulator Add the pmbus driver for the Infineon ir38064 voltage regulator. VOUT_MODE is not supported by the device. The driver fakes linear16 mode with exponent value -8. The device supports VOUT_PEAK, IOUT_PEAK, and TEMPERATURE_PEAK, however this driver does not enable them. Signed-off-by: Maxim Sloyko <maxims@google.com> Signed-off-by: Patrick Venture <venture@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-04-12 23:37:56 +03:00
in1_min_alarm Input voltage low alarm
in2_label "vout1"
in2_input Measured output voltage
in2_lcrit Critical minimum output voltage
docs: hwmon: convert three docs to ReST format Those three new drivers were missed on the initial conversion to ReST format. So: - Rename them to .rst; - Add them to the hwmon index.rst index; - add some blank lines at the "Supported systems:" part, in order to allow Sphinx to properly identify new lines, suppressing warnings and avoid it to output some random lines in bold; - When multiple authors are involved, change the authors part to a list, in order to avoid adding blank lines. - adjust the table cells (one of the tables seemed to be assuming that tab is 4 positions instead of 8) and add the table markup. - be sure that the section markups have the same number of characters as the section title. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-04-22 20:39:37 +03:00
in2_lcrit_alarm Output voltage critical low alarm
hwmon: (pmbus/ir38064) Add driver for Infineon IR38064 Voltage Regulator Add the pmbus driver for the Infineon ir38064 voltage regulator. VOUT_MODE is not supported by the device. The driver fakes linear16 mode with exponent value -8. The device supports VOUT_PEAK, IOUT_PEAK, and TEMPERATURE_PEAK, however this driver does not enable them. Signed-off-by: Maxim Sloyko <maxims@google.com> Signed-off-by: Patrick Venture <venture@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-04-12 23:37:56 +03:00
in2_crit Critical maximum output voltage
in2_crit_alarm Output voltage critical high alarm
docs: hwmon: convert three docs to ReST format Those three new drivers were missed on the initial conversion to ReST format. So: - Rename them to .rst; - Add them to the hwmon index.rst index; - add some blank lines at the "Supported systems:" part, in order to allow Sphinx to properly identify new lines, suppressing warnings and avoid it to output some random lines in bold; - When multiple authors are involved, change the authors part to a list, in order to avoid adding blank lines. - adjust the table cells (one of the tables seemed to be assuming that tab is 4 positions instead of 8) and add the table markup. - be sure that the section markups have the same number of characters as the section title. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-04-22 20:39:37 +03:00
in2_max Maximum output voltage
hwmon: (pmbus/ir38064) Add driver for Infineon IR38064 Voltage Regulator Add the pmbus driver for the Infineon ir38064 voltage regulator. VOUT_MODE is not supported by the device. The driver fakes linear16 mode with exponent value -8. The device supports VOUT_PEAK, IOUT_PEAK, and TEMPERATURE_PEAK, however this driver does not enable them. Signed-off-by: Maxim Sloyko <maxims@google.com> Signed-off-by: Patrick Venture <venture@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-04-12 23:37:56 +03:00
in2_max_alarm Output voltage high alarm
docs: hwmon: convert three docs to ReST format Those three new drivers were missed on the initial conversion to ReST format. So: - Rename them to .rst; - Add them to the hwmon index.rst index; - add some blank lines at the "Supported systems:" part, in order to allow Sphinx to properly identify new lines, suppressing warnings and avoid it to output some random lines in bold; - When multiple authors are involved, change the authors part to a list, in order to avoid adding blank lines. - adjust the table cells (one of the tables seemed to be assuming that tab is 4 positions instead of 8) and add the table markup. - be sure that the section markups have the same number of characters as the section title. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-04-22 20:39:37 +03:00
in2_min Minimum output voltage
hwmon: (pmbus/ir38064) Add driver for Infineon IR38064 Voltage Regulator Add the pmbus driver for the Infineon ir38064 voltage regulator. VOUT_MODE is not supported by the device. The driver fakes linear16 mode with exponent value -8. The device supports VOUT_PEAK, IOUT_PEAK, and TEMPERATURE_PEAK, however this driver does not enable them. Signed-off-by: Maxim Sloyko <maxims@google.com> Signed-off-by: Patrick Venture <venture@google.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-04-12 23:37:56 +03:00
in2_min_alarm Output voltage low alarm
power1_label "pout1"
power1_input Measured output power
temp1_input Measured temperature
temp1_crit Critical high temperature
temp1_crit_alarm Chip temperature critical high alarm
temp1_max Maximum temperature
docs: hwmon: convert three docs to ReST format Those three new drivers were missed on the initial conversion to ReST format. So: - Rename them to .rst; - Add them to the hwmon index.rst index; - add some blank lines at the "Supported systems:" part, in order to allow Sphinx to properly identify new lines, suppressing warnings and avoid it to output some random lines in bold; - When multiple authors are involved, change the authors part to a list, in order to avoid adding blank lines. - adjust the table cells (one of the tables seemed to be assuming that tab is 4 positions instead of 8) and add the table markup. - be sure that the section markups have the same number of characters as the section title. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2019-04-22 20:39:37 +03:00
temp1_max_alarm Chip temperature high alarm
======================= ===========================