WSL2-Linux-Kernel/include/linux/audit.h

690 строки
19 KiB
C
Исходник Обычный вид История

/* SPDX-License-Identifier: GPL-2.0-or-later */
/* audit.h -- Auditing support
*
* Copyright 2003-2004 Red Hat Inc., Durham, North Carolina.
* All Rights Reserved.
*
* Written by Rickard E. (Rik) Faith <faith@redhat.com>
*/
#ifndef _LINUX_AUDIT_H_
#define _LINUX_AUDIT_H_
#include <linux/sched.h>
#include <linux/ptrace.h>
#include <uapi/linux/audit.h>
audit: log nftables configuration change events iptables, ip6tables, arptables and ebtables table registration, replacement and unregistration configuration events are logged for the native (legacy) iptables setsockopt api, but not for the nftables netlink api which is used by the nft-variant of iptables in addition to nftables itself. Add calls to log the configuration actions in the nftables netlink api. This uses the same NETFILTER_CFG record format but overloads the table field. type=NETFILTER_CFG msg=audit(2020-05-28 17:46:41.878:162) : table=?:0;?:0 family=unspecified entries=2 op=nft_register_gen pid=396 subj=system_u:system_r:firewalld_t:s0 comm=firewalld ... type=NETFILTER_CFG msg=audit(2020-05-28 17:46:41.878:162) : table=firewalld:1;?:0 family=inet entries=0 op=nft_register_table pid=396 subj=system_u:system_r:firewalld_t:s0 comm=firewalld ... type=NETFILTER_CFG msg=audit(2020-05-28 17:46:41.911:163) : table=firewalld:1;filter_FORWARD:85 family=inet entries=8 op=nft_register_chain pid=396 subj=system_u:system_r:firewalld_t:s0 comm=firewalld ... type=NETFILTER_CFG msg=audit(2020-05-28 17:46:41.911:163) : table=firewalld:1;filter_FORWARD:85 family=inet entries=101 op=nft_register_rule pid=396 subj=system_u:system_r:firewalld_t:s0 comm=firewalld ... type=NETFILTER_CFG msg=audit(2020-05-28 17:46:41.911:163) : table=firewalld:1;__set0:87 family=inet entries=87 op=nft_register_setelem pid=396 subj=system_u:system_r:firewalld_t:s0 comm=firewalld ... type=NETFILTER_CFG msg=audit(2020-05-28 17:46:41.911:163) : table=firewalld:1;__set0:87 family=inet entries=0 op=nft_register_set pid=396 subj=system_u:system_r:firewalld_t:s0 comm=firewalld For further information please see issue https://github.com/linux-audit/audit-kernel/issues/124 Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-06-04 16:20:49 +03:00
#include <uapi/linux/netfilter/nf_tables.h>
#define AUDIT_INO_UNSET ((unsigned long)-1)
#define AUDIT_DEV_UNSET ((dev_t)-1)
struct audit_sig_info {
uid_t uid;
pid_t pid;
audit: Replace zero-length array with flexible-array The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-05-07 21:50:41 +03:00
char ctx[];
};
struct audit_buffer;
struct audit_context;
struct inode;
struct netlink_skb_parms;
struct path;
struct linux_binprm;
struct mq_attr;
struct mqstat;
struct audit_watch;
struct audit_tree;
struct sk_buff;
struct audit_krule {
u32 pflags;
u32 flags;
u32 listnr;
u32 action;
u32 mask[AUDIT_BITMASK_SIZE];
u32 buflen; /* for data alloc on list rules */
u32 field_count;
char *filterkey; /* ties events to rules */
struct audit_field *fields;
struct audit_field *arch_f; /* quick access to arch field */
struct audit_field *inode_f; /* quick access to an inode field */
struct audit_watch *watch; /* associated watch */
struct audit_tree *tree; /* associated watched tree */
struct audit_fsnotify_mark *exe;
struct list_head rlist; /* entry in audit_{watch,tree}.rules list */
struct list_head list; /* for AUDIT_LIST* purposes only */
u64 prio;
};
/* Flag to indicate legacy AUDIT_LOGINUID unset usage */
#define AUDIT_LOGINUID_LEGACY 0x1
struct audit_field {
u32 type;
union {
u32 val;
kuid_t uid;
kgid_t gid;
struct {
char *lsm_str;
void *lsm_rule;
};
};
u32 op;
};
ntp: Audit NTP parameters adjustment Emit an audit record every time selected NTP parameters are modified from userspace (via adjtimex(2) or clock_adjtime(2)). These parameters may be used to indirectly change system clock, and thus their modifications should be audited. Such events will now generate records of type AUDIT_TIME_ADJNTPVAL containing the following fields: - op -- which value was adjusted: - offset -- corresponding to the time_offset variable - freq -- corresponding to the time_freq variable - status -- corresponding to the time_status variable - adjust -- corresponding to the time_adjust variable - tick -- corresponding to the tick_usec variable - tai -- corresponding to the timekeeping's TAI offset - old -- the old value - new -- the new value Example records: type=TIME_ADJNTPVAL msg=audit(1530616044.507:7): op=status old=64 new=8256 type=TIME_ADJNTPVAL msg=audit(1530616044.511:11): op=freq old=0 new=49180377088000 The records of this type will be associated with the corresponding syscall records. An overview of parameter changes that can be done via do_adjtimex() (based on information from Miroslav Lichvar) and whether they are audited: __timekeeping_set_tai_offset() -- sets the offset from the International Atomic Time (AUDITED) NTP variables: time_offset -- can adjust the clock by up to 0.5 seconds per call and also speed it up or slow down by up to about 0.05% (43 seconds per day) (AUDITED) time_freq -- can speed up or slow down by up to about 0.05% (AUDITED) time_status -- can insert/delete leap seconds and it also enables/ disables synchronization of the hardware real-time clock (AUDITED) time_maxerror, time_esterror -- change error estimates used to inform userspace applications (NOT AUDITED) time_constant -- controls the speed of the clock adjustments that are made when time_offset is set (NOT AUDITED) time_adjust -- can temporarily speed up or slow down the clock by up to 0.05% (AUDITED) tick_usec -- a more extreme version of time_freq; can speed up or slow down the clock by up to 10% (AUDITED) Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Reviewed-by: Richard Guy Briggs <rgb@redhat.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-04-10 12:14:20 +03:00
enum audit_ntp_type {
AUDIT_NTP_OFFSET,
AUDIT_NTP_FREQ,
AUDIT_NTP_STATUS,
AUDIT_NTP_TAI,
AUDIT_NTP_TICK,
AUDIT_NTP_ADJUST,
AUDIT_NTP_NVALS /* count */
};
#ifdef CONFIG_AUDITSYSCALL
struct audit_ntp_val {
long long oldval, newval;
};
struct audit_ntp_data {
struct audit_ntp_val vals[AUDIT_NTP_NVALS];
};
#else
struct audit_ntp_data {};
#endif
enum audit_nfcfgop {
AUDIT_XT_OP_REGISTER,
AUDIT_XT_OP_REPLACE,
AUDIT_XT_OP_UNREGISTER,
audit: log nftables configuration change events iptables, ip6tables, arptables and ebtables table registration, replacement and unregistration configuration events are logged for the native (legacy) iptables setsockopt api, but not for the nftables netlink api which is used by the nft-variant of iptables in addition to nftables itself. Add calls to log the configuration actions in the nftables netlink api. This uses the same NETFILTER_CFG record format but overloads the table field. type=NETFILTER_CFG msg=audit(2020-05-28 17:46:41.878:162) : table=?:0;?:0 family=unspecified entries=2 op=nft_register_gen pid=396 subj=system_u:system_r:firewalld_t:s0 comm=firewalld ... type=NETFILTER_CFG msg=audit(2020-05-28 17:46:41.878:162) : table=firewalld:1;?:0 family=inet entries=0 op=nft_register_table pid=396 subj=system_u:system_r:firewalld_t:s0 comm=firewalld ... type=NETFILTER_CFG msg=audit(2020-05-28 17:46:41.911:163) : table=firewalld:1;filter_FORWARD:85 family=inet entries=8 op=nft_register_chain pid=396 subj=system_u:system_r:firewalld_t:s0 comm=firewalld ... type=NETFILTER_CFG msg=audit(2020-05-28 17:46:41.911:163) : table=firewalld:1;filter_FORWARD:85 family=inet entries=101 op=nft_register_rule pid=396 subj=system_u:system_r:firewalld_t:s0 comm=firewalld ... type=NETFILTER_CFG msg=audit(2020-05-28 17:46:41.911:163) : table=firewalld:1;__set0:87 family=inet entries=87 op=nft_register_setelem pid=396 subj=system_u:system_r:firewalld_t:s0 comm=firewalld ... type=NETFILTER_CFG msg=audit(2020-05-28 17:46:41.911:163) : table=firewalld:1;__set0:87 family=inet entries=0 op=nft_register_set pid=396 subj=system_u:system_r:firewalld_t:s0 comm=firewalld For further information please see issue https://github.com/linux-audit/audit-kernel/issues/124 Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <paul@paul-moore.com>
2020-06-04 16:20:49 +03:00
AUDIT_NFT_OP_TABLE_REGISTER,
AUDIT_NFT_OP_TABLE_UNREGISTER,
AUDIT_NFT_OP_CHAIN_REGISTER,
AUDIT_NFT_OP_CHAIN_UNREGISTER,
AUDIT_NFT_OP_RULE_REGISTER,
AUDIT_NFT_OP_RULE_UNREGISTER,
AUDIT_NFT_OP_SET_REGISTER,
AUDIT_NFT_OP_SET_UNREGISTER,
AUDIT_NFT_OP_SETELEM_REGISTER,
AUDIT_NFT_OP_SETELEM_UNREGISTER,
AUDIT_NFT_OP_GEN_REGISTER,
AUDIT_NFT_OP_OBJ_REGISTER,
AUDIT_NFT_OP_OBJ_UNREGISTER,
AUDIT_NFT_OP_OBJ_RESET,
AUDIT_NFT_OP_FLOWTABLE_REGISTER,
AUDIT_NFT_OP_FLOWTABLE_UNREGISTER,
AUDIT_NFT_OP_INVALID,
};
extern int is_audit_feature_set(int which);
extern int __init audit_register_class(int class, unsigned *list);
extern int audit_classify_syscall(int abi, unsigned syscall);
extern int audit_classify_arch(int arch);
/* only for compat system calls */
extern unsigned compat_write_class[];
extern unsigned compat_read_class[];
extern unsigned compat_dir_class[];
extern unsigned compat_chattr_class[];
extern unsigned compat_signal_class[];
extern int audit_classify_compat_syscall(int abi, unsigned syscall);
/* audit_names->type values */
#define AUDIT_TYPE_UNKNOWN 0 /* we don't know yet */
#define AUDIT_TYPE_NORMAL 1 /* a "normal" audit record */
#define AUDIT_TYPE_PARENT 2 /* a parent audit record */
#define AUDIT_TYPE_CHILD_DELETE 3 /* a child being deleted */
#define AUDIT_TYPE_CHILD_CREATE 4 /* a child being created */
/* maximized args number that audit_socketcall can process */
#define AUDITSC_ARGS 6
/* bit values for ->signal->audit_tty */
#define AUDIT_TTY_ENABLE BIT(0)
#define AUDIT_TTY_LOG_PASSWD BIT(1)
struct filename;
#define AUDIT_OFF 0
#define AUDIT_ON 1
#define AUDIT_LOCKED 2
#ifdef CONFIG_AUDIT
/* These are defined in audit.c */
/* Public API */
extern __printf(4, 5)
void audit_log(struct audit_context *ctx, gfp_t gfp_mask, int type,
const char *fmt, ...);
extern struct audit_buffer *audit_log_start(struct audit_context *ctx, gfp_t gfp_mask, int type);
extern __printf(2, 3)
void audit_log_format(struct audit_buffer *ab, const char *fmt, ...);
extern void audit_log_end(struct audit_buffer *ab);
extern bool audit_string_contains_control(const char *string,
size_t len);
extern void audit_log_n_hex(struct audit_buffer *ab,
const unsigned char *buf,
size_t len);
extern void audit_log_n_string(struct audit_buffer *ab,
const char *buf,
size_t n);
extern void audit_log_n_untrustedstring(struct audit_buffer *ab,
const char *string,
size_t n);
extern void audit_log_untrustedstring(struct audit_buffer *ab,
const char *string);
extern void audit_log_d_path(struct audit_buffer *ab,
const char *prefix,
const struct path *path);
extern void audit_log_key(struct audit_buffer *ab,
char *key);
extern void audit_log_path_denied(int type,
const char *operation);
extern void audit_log_lost(const char *message);
extern int audit_log_task_context(struct audit_buffer *ab);
extern void audit_log_task_info(struct audit_buffer *ab);
extern int audit_update_lsm_rules(void);
/* Private API (for audit.c only) */
extern int audit_rule_change(int type, int seq, void *data, size_t datasz);
extern int audit_list_rules_send(struct sk_buff *request_skb, int seq);
extern int audit_set_loginuid(kuid_t loginuid);
static inline kuid_t audit_get_loginuid(struct task_struct *tsk)
{
return tsk->loginuid;
}
static inline unsigned int audit_get_sessionid(struct task_struct *tsk)
{
return tsk->sessionid;
}
extern u32 audit_enabled;
extern int audit_signal_info(int sig, struct task_struct *t);
#else /* CONFIG_AUDIT */
static inline __printf(4, 5)
void audit_log(struct audit_context *ctx, gfp_t gfp_mask, int type,
const char *fmt, ...)
{ }
static inline struct audit_buffer *audit_log_start(struct audit_context *ctx,
gfp_t gfp_mask, int type)
{
return NULL;
}
static inline __printf(2, 3)
void audit_log_format(struct audit_buffer *ab, const char *fmt, ...)
{ }
static inline void audit_log_end(struct audit_buffer *ab)
{ }
static inline void audit_log_n_hex(struct audit_buffer *ab,
const unsigned char *buf, size_t len)
{ }
static inline void audit_log_n_string(struct audit_buffer *ab,
const char *buf, size_t n)
{ }
static inline void audit_log_n_untrustedstring(struct audit_buffer *ab,
const char *string, size_t n)
{ }
static inline void audit_log_untrustedstring(struct audit_buffer *ab,
const char *string)
{ }
static inline void audit_log_d_path(struct audit_buffer *ab,
const char *prefix,
const struct path *path)
{ }
static inline void audit_log_key(struct audit_buffer *ab, char *key)
{ }
static inline void audit_log_path_denied(int type, const char *operation)
{ }
static inline int audit_log_task_context(struct audit_buffer *ab)
{
return 0;
}
static inline void audit_log_task_info(struct audit_buffer *ab)
{ }
static inline kuid_t audit_get_loginuid(struct task_struct *tsk)
{
return INVALID_UID;
}
static inline unsigned int audit_get_sessionid(struct task_struct *tsk)
{
return AUDIT_SID_UNSET;
}
#define audit_enabled AUDIT_OFF
static inline int audit_signal_info(int sig, struct task_struct *t)
{
return 0;
}
#endif /* CONFIG_AUDIT */
#ifdef CONFIG_AUDIT_COMPAT_GENERIC
#define audit_is_compat(arch) (!((arch) & __AUDIT_ARCH_64BIT))
#else
#define audit_is_compat(arch) false
#endif
#define AUDIT_INODE_PARENT 1 /* dentry represents the parent */
#define AUDIT_INODE_HIDDEN 2 /* audit record should be hidden */
#define AUDIT_INODE_NOEVAL 4 /* audit record incomplete */
#ifdef CONFIG_AUDITSYSCALL
#include <asm/syscall.h> /* for syscall_get_arch() */
/* These are defined in auditsc.c */
/* Public API */
extern int audit_alloc(struct task_struct *task);
extern void __audit_free(struct task_struct *task);
extern void __audit_syscall_entry(int major, unsigned long a0, unsigned long a1,
unsigned long a2, unsigned long a3);
Audit: push audit success and retcode into arch ptrace.h The audit system previously expected arches calling to audit_syscall_exit to supply as arguments if the syscall was a success and what the return code was. Audit also provides a helper AUDITSC_RESULT which was supposed to simplify things by converting from negative retcodes to an audit internal magic value stating success or failure. This helper was wrong and could indicate that a valid pointer returned to userspace was a failed syscall. The fix is to fix the layering foolishness. We now pass audit_syscall_exit a struct pt_reg and it in turns calls back into arch code to collect the return value and to determine if the syscall was a success or failure. We also define a generic is_syscall_success() macro which determines success/failure based on if the value is < -MAX_ERRNO. This works for arches like x86 which do not use a separate mechanism to indicate syscall failure. We make both the is_syscall_success() and regs_return_value() static inlines instead of macros. The reason is because the audit function must take a void* for the regs. (uml calls theirs struct uml_pt_regs instead of just struct pt_regs so audit_syscall_exit can't take a struct pt_regs). Since the audit function takes a void* we need to use static inlines to cast it back to the arch correct structure to dereference it. The other major change is that on some arches, like ia64, MIPS and ppc, we change regs_return_value() to give us the negative value on syscall failure. THE only other user of this macro, kretprobe_example.c, won't notice and it makes the value signed consistently for the audit functions across all archs. In arch/sh/kernel/ptrace_64.c I see that we were using regs[9] in the old audit code as the return value. But the ptrace_64.h code defined the macro regs_return_value() as regs[3]. I have no idea which one is correct, but this patch now uses the regs_return_value() function, so it now uses regs[3]. For powerpc we previously used regs->result but now use the regs_return_value() function which uses regs->gprs[3]. regs->gprs[3] is always positive so the regs_return_value(), much like ia64 makes it negative before calling the audit code when appropriate. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: H. Peter Anvin <hpa@zytor.com> [for x86 portion] Acked-by: Tony Luck <tony.luck@intel.com> [for ia64] Acked-by: Richard Weinberger <richard@nod.at> [for uml] Acked-by: David S. Miller <davem@davemloft.net> [for sparc] Acked-by: Ralf Baechle <ralf@linux-mips.org> [for mips] Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [for ppc]
2012-01-03 23:23:06 +04:00
extern void __audit_syscall_exit(int ret_success, long ret_value);
extern struct filename *__audit_reusename(const __user char *uptr);
extern void __audit_getname(struct filename *name);
extern void __audit_inode(struct filename *name, const struct dentry *dentry,
audit: fix mq_open and mq_unlink to add the MQ root as a hidden parent audit_names record The old audit PATH records for mq_open looked like this: type=PATH msg=audit(1366282323.982:869): item=1 name=(null) inode=6777 dev=00:0c mode=041777 ouid=0 ogid=0 rdev=00:00 obj=system_u:object_r:tmpfs_t:s15:c0.c1023 type=PATH msg=audit(1366282323.982:869): item=0 name="test_mq" inode=26732 dev=00:0c mode=0100700 ouid=0 ogid=0 rdev=00:00 obj=staff_u:object_r:user_tmpfs_t:s15:c0.c1023 ...with the audit related changes that went into 3.7, they now look like this: type=PATH msg=audit(1366282236.776:3606): item=2 name=(null) inode=66655 dev=00:0c mode=0100700 ouid=0 ogid=0 rdev=00:00 obj=staff_u:object_r:user_tmpfs_t:s15:c0.c1023 type=PATH msg=audit(1366282236.776:3606): item=1 name=(null) inode=6926 dev=00:0c mode=041777 ouid=0 ogid=0 rdev=00:00 obj=system_u:object_r:tmpfs_t:s15:c0.c1023 type=PATH msg=audit(1366282236.776:3606): item=0 name="test_mq" Both of these look wrong to me. As Steve Grubb pointed out: "What we need is 1 PATH record that identifies the MQ. The other PATH records probably should not be there." Fix it to record the mq root as a parent, and flag it such that it should be hidden from view when the names are logged, since the root of the mq filesystem isn't terribly interesting. With this change, we get a single PATH record that looks more like this: type=PATH msg=audit(1368021604.836:484): item=0 name="test_mq" inode=16914 dev=00:0c mode=0100644 ouid=0 ogid=0 rdev=00:00 obj=unconfined_u:object_r:user_tmpfs_t:s0 In order to do this, a new audit_inode_parent_hidden() function is added. If we do it this way, then we avoid having the existing callers of audit_inode needing to do any sort of flag conversion if auditing is inactive. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reported-by: Jiri Jaburek <jjaburek@redhat.com> Cc: Steve Grubb <sgrubb@redhat.com> Cc: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 02:59:36 +04:00
unsigned int flags);
extern void __audit_file(const struct file *);
extern void __audit_inode_child(struct inode *parent,
const struct dentry *dentry,
const unsigned char type);
extern void audit_seccomp(unsigned long syscall, long signr, int code);
seccomp: Audit attempts to modify the actions_logged sysctl The decision to log a seccomp action will always be subject to the value of the kernel.seccomp.actions_logged sysctl, even for processes that are being inspected via the audit subsystem, in an upcoming patch. Therefore, we need to emit an audit record on attempts at writing to the actions_logged sysctl when auditing is enabled. This patch updates the write handler for the actions_logged sysctl to emit an audit record on attempts to write to the sysctl. Successful writes to the sysctl will result in a record that includes a normalized list of logged actions in the "actions" field and a "res" field equal to 1. Unsuccessful writes to the sysctl will result in a record that doesn't include the "actions" field and has a "res" field equal to 0. Not all unsuccessful writes to the sysctl are audited. For example, an audit record will not be emitted if an unprivileged process attempts to open the sysctl file for reading since that access control check is not part of the sysctl's write handler. Below are some example audit records when writing various strings to the actions_logged sysctl. Writing "not-a-real-action", when the kernel.seccomp.actions_logged sysctl previously was "kill_process kill_thread trap errno trace log", emits this audit record: type=CONFIG_CHANGE msg=audit(1525392371.454:120): op=seccomp-logging actions=? old-actions=kill_process,kill_thread,trap,errno,trace,log res=0 If you then write "kill_process kill_thread errno trace log", this audit record is emitted: type=CONFIG_CHANGE msg=audit(1525392401.645:126): op=seccomp-logging actions=kill_process,kill_thread,errno,trace,log old-actions=kill_process,kill_thread,trap,errno,trace,log res=1 If you then write "log log errno trace kill_process kill_thread", which is unordered and contains the log action twice, it results in the same actions value as the previous record: type=CONFIG_CHANGE msg=audit(1525392436.354:132): op=seccomp-logging actions=kill_process,kill_thread,errno,trace,log old-actions=kill_process,kill_thread,errno,trace,log res=1 If you then write an empty string to the sysctl, this audit record is emitted: type=CONFIG_CHANGE msg=audit(1525392494.413:138): op=seccomp-logging actions=(none) old-actions=kill_process,kill_thread,errno,trace,log res=1 No audit records are generated when reading the actions_logged sysctl. Suggested-by: Steve Grubb <sgrubb@redhat.com> Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-05-04 04:08:14 +03:00
extern void audit_seccomp_actions_logged(const char *names,
const char *old_names, int res);
extern void __audit_ptrace(struct task_struct *t);
static inline void audit_set_context(struct task_struct *task, struct audit_context *ctx)
{
task->audit_context = ctx;
}
static inline struct audit_context *audit_context(void)
{
return current->audit_context;
}
static inline bool audit_dummy_context(void)
{
void *p = audit_context();
return !p || *(int *)p;
}
static inline void audit_free(struct task_struct *task)
{
if (unlikely(task->audit_context))
__audit_free(task);
}
static inline void audit_syscall_entry(int major, unsigned long a0,
unsigned long a1, unsigned long a2,
unsigned long a3)
{
if (unlikely(audit_context()))
__audit_syscall_entry(major, a0, a1, a2, a3);
}
Audit: push audit success and retcode into arch ptrace.h The audit system previously expected arches calling to audit_syscall_exit to supply as arguments if the syscall was a success and what the return code was. Audit also provides a helper AUDITSC_RESULT which was supposed to simplify things by converting from negative retcodes to an audit internal magic value stating success or failure. This helper was wrong and could indicate that a valid pointer returned to userspace was a failed syscall. The fix is to fix the layering foolishness. We now pass audit_syscall_exit a struct pt_reg and it in turns calls back into arch code to collect the return value and to determine if the syscall was a success or failure. We also define a generic is_syscall_success() macro which determines success/failure based on if the value is < -MAX_ERRNO. This works for arches like x86 which do not use a separate mechanism to indicate syscall failure. We make both the is_syscall_success() and regs_return_value() static inlines instead of macros. The reason is because the audit function must take a void* for the regs. (uml calls theirs struct uml_pt_regs instead of just struct pt_regs so audit_syscall_exit can't take a struct pt_regs). Since the audit function takes a void* we need to use static inlines to cast it back to the arch correct structure to dereference it. The other major change is that on some arches, like ia64, MIPS and ppc, we change regs_return_value() to give us the negative value on syscall failure. THE only other user of this macro, kretprobe_example.c, won't notice and it makes the value signed consistently for the audit functions across all archs. In arch/sh/kernel/ptrace_64.c I see that we were using regs[9] in the old audit code as the return value. But the ptrace_64.h code defined the macro regs_return_value() as regs[3]. I have no idea which one is correct, but this patch now uses the regs_return_value() function, so it now uses regs[3]. For powerpc we previously used regs->result but now use the regs_return_value() function which uses regs->gprs[3]. regs->gprs[3] is always positive so the regs_return_value(), much like ia64 makes it negative before calling the audit code when appropriate. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: H. Peter Anvin <hpa@zytor.com> [for x86 portion] Acked-by: Tony Luck <tony.luck@intel.com> [for ia64] Acked-by: Richard Weinberger <richard@nod.at> [for uml] Acked-by: David S. Miller <davem@davemloft.net> [for sparc] Acked-by: Ralf Baechle <ralf@linux-mips.org> [for mips] Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [for ppc]
2012-01-03 23:23:06 +04:00
static inline void audit_syscall_exit(void *pt_regs)
{
if (unlikely(audit_context())) {
Audit: push audit success and retcode into arch ptrace.h The audit system previously expected arches calling to audit_syscall_exit to supply as arguments if the syscall was a success and what the return code was. Audit also provides a helper AUDITSC_RESULT which was supposed to simplify things by converting from negative retcodes to an audit internal magic value stating success or failure. This helper was wrong and could indicate that a valid pointer returned to userspace was a failed syscall. The fix is to fix the layering foolishness. We now pass audit_syscall_exit a struct pt_reg and it in turns calls back into arch code to collect the return value and to determine if the syscall was a success or failure. We also define a generic is_syscall_success() macro which determines success/failure based on if the value is < -MAX_ERRNO. This works for arches like x86 which do not use a separate mechanism to indicate syscall failure. We make both the is_syscall_success() and regs_return_value() static inlines instead of macros. The reason is because the audit function must take a void* for the regs. (uml calls theirs struct uml_pt_regs instead of just struct pt_regs so audit_syscall_exit can't take a struct pt_regs). Since the audit function takes a void* we need to use static inlines to cast it back to the arch correct structure to dereference it. The other major change is that on some arches, like ia64, MIPS and ppc, we change regs_return_value() to give us the negative value on syscall failure. THE only other user of this macro, kretprobe_example.c, won't notice and it makes the value signed consistently for the audit functions across all archs. In arch/sh/kernel/ptrace_64.c I see that we were using regs[9] in the old audit code as the return value. But the ptrace_64.h code defined the macro regs_return_value() as regs[3]. I have no idea which one is correct, but this patch now uses the regs_return_value() function, so it now uses regs[3]. For powerpc we previously used regs->result but now use the regs_return_value() function which uses regs->gprs[3]. regs->gprs[3] is always positive so the regs_return_value(), much like ia64 makes it negative before calling the audit code when appropriate. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: H. Peter Anvin <hpa@zytor.com> [for x86 portion] Acked-by: Tony Luck <tony.luck@intel.com> [for ia64] Acked-by: Richard Weinberger <richard@nod.at> [for uml] Acked-by: David S. Miller <davem@davemloft.net> [for sparc] Acked-by: Ralf Baechle <ralf@linux-mips.org> [for mips] Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [for ppc]
2012-01-03 23:23:06 +04:00
int success = is_syscall_success(pt_regs);
long return_code = regs_return_value(pt_regs);
Audit: push audit success and retcode into arch ptrace.h The audit system previously expected arches calling to audit_syscall_exit to supply as arguments if the syscall was a success and what the return code was. Audit also provides a helper AUDITSC_RESULT which was supposed to simplify things by converting from negative retcodes to an audit internal magic value stating success or failure. This helper was wrong and could indicate that a valid pointer returned to userspace was a failed syscall. The fix is to fix the layering foolishness. We now pass audit_syscall_exit a struct pt_reg and it in turns calls back into arch code to collect the return value and to determine if the syscall was a success or failure. We also define a generic is_syscall_success() macro which determines success/failure based on if the value is < -MAX_ERRNO. This works for arches like x86 which do not use a separate mechanism to indicate syscall failure. We make both the is_syscall_success() and regs_return_value() static inlines instead of macros. The reason is because the audit function must take a void* for the regs. (uml calls theirs struct uml_pt_regs instead of just struct pt_regs so audit_syscall_exit can't take a struct pt_regs). Since the audit function takes a void* we need to use static inlines to cast it back to the arch correct structure to dereference it. The other major change is that on some arches, like ia64, MIPS and ppc, we change regs_return_value() to give us the negative value on syscall failure. THE only other user of this macro, kretprobe_example.c, won't notice and it makes the value signed consistently for the audit functions across all archs. In arch/sh/kernel/ptrace_64.c I see that we were using regs[9] in the old audit code as the return value. But the ptrace_64.h code defined the macro regs_return_value() as regs[3]. I have no idea which one is correct, but this patch now uses the regs_return_value() function, so it now uses regs[3]. For powerpc we previously used regs->result but now use the regs_return_value() function which uses regs->gprs[3]. regs->gprs[3] is always positive so the regs_return_value(), much like ia64 makes it negative before calling the audit code when appropriate. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: H. Peter Anvin <hpa@zytor.com> [for x86 portion] Acked-by: Tony Luck <tony.luck@intel.com> [for ia64] Acked-by: Richard Weinberger <richard@nod.at> [for uml] Acked-by: David S. Miller <davem@davemloft.net> [for sparc] Acked-by: Ralf Baechle <ralf@linux-mips.org> [for mips] Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [for ppc]
2012-01-03 23:23:06 +04:00
__audit_syscall_exit(success, return_code);
}
}
static inline struct filename *audit_reusename(const __user char *name)
{
if (unlikely(!audit_dummy_context()))
return __audit_reusename(name);
return NULL;
}
static inline void audit_getname(struct filename *name)
{
if (unlikely(!audit_dummy_context()))
__audit_getname(name);
}
audit: fix mq_open and mq_unlink to add the MQ root as a hidden parent audit_names record The old audit PATH records for mq_open looked like this: type=PATH msg=audit(1366282323.982:869): item=1 name=(null) inode=6777 dev=00:0c mode=041777 ouid=0 ogid=0 rdev=00:00 obj=system_u:object_r:tmpfs_t:s15:c0.c1023 type=PATH msg=audit(1366282323.982:869): item=0 name="test_mq" inode=26732 dev=00:0c mode=0100700 ouid=0 ogid=0 rdev=00:00 obj=staff_u:object_r:user_tmpfs_t:s15:c0.c1023 ...with the audit related changes that went into 3.7, they now look like this: type=PATH msg=audit(1366282236.776:3606): item=2 name=(null) inode=66655 dev=00:0c mode=0100700 ouid=0 ogid=0 rdev=00:00 obj=staff_u:object_r:user_tmpfs_t:s15:c0.c1023 type=PATH msg=audit(1366282236.776:3606): item=1 name=(null) inode=6926 dev=00:0c mode=041777 ouid=0 ogid=0 rdev=00:00 obj=system_u:object_r:tmpfs_t:s15:c0.c1023 type=PATH msg=audit(1366282236.776:3606): item=0 name="test_mq" Both of these look wrong to me. As Steve Grubb pointed out: "What we need is 1 PATH record that identifies the MQ. The other PATH records probably should not be there." Fix it to record the mq root as a parent, and flag it such that it should be hidden from view when the names are logged, since the root of the mq filesystem isn't terribly interesting. With this change, we get a single PATH record that looks more like this: type=PATH msg=audit(1368021604.836:484): item=0 name="test_mq" inode=16914 dev=00:0c mode=0100644 ouid=0 ogid=0 rdev=00:00 obj=unconfined_u:object_r:user_tmpfs_t:s0 In order to do this, a new audit_inode_parent_hidden() function is added. If we do it this way, then we avoid having the existing callers of audit_inode needing to do any sort of flag conversion if auditing is inactive. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reported-by: Jiri Jaburek <jjaburek@redhat.com> Cc: Steve Grubb <sgrubb@redhat.com> Cc: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 02:59:36 +04:00
static inline void audit_inode(struct filename *name,
const struct dentry *dentry,
unsigned int aflags) {
if (unlikely(!audit_dummy_context()))
__audit_inode(name, dentry, aflags);
audit: fix mq_open and mq_unlink to add the MQ root as a hidden parent audit_names record The old audit PATH records for mq_open looked like this: type=PATH msg=audit(1366282323.982:869): item=1 name=(null) inode=6777 dev=00:0c mode=041777 ouid=0 ogid=0 rdev=00:00 obj=system_u:object_r:tmpfs_t:s15:c0.c1023 type=PATH msg=audit(1366282323.982:869): item=0 name="test_mq" inode=26732 dev=00:0c mode=0100700 ouid=0 ogid=0 rdev=00:00 obj=staff_u:object_r:user_tmpfs_t:s15:c0.c1023 ...with the audit related changes that went into 3.7, they now look like this: type=PATH msg=audit(1366282236.776:3606): item=2 name=(null) inode=66655 dev=00:0c mode=0100700 ouid=0 ogid=0 rdev=00:00 obj=staff_u:object_r:user_tmpfs_t:s15:c0.c1023 type=PATH msg=audit(1366282236.776:3606): item=1 name=(null) inode=6926 dev=00:0c mode=041777 ouid=0 ogid=0 rdev=00:00 obj=system_u:object_r:tmpfs_t:s15:c0.c1023 type=PATH msg=audit(1366282236.776:3606): item=0 name="test_mq" Both of these look wrong to me. As Steve Grubb pointed out: "What we need is 1 PATH record that identifies the MQ. The other PATH records probably should not be there." Fix it to record the mq root as a parent, and flag it such that it should be hidden from view when the names are logged, since the root of the mq filesystem isn't terribly interesting. With this change, we get a single PATH record that looks more like this: type=PATH msg=audit(1368021604.836:484): item=0 name="test_mq" inode=16914 dev=00:0c mode=0100644 ouid=0 ogid=0 rdev=00:00 obj=unconfined_u:object_r:user_tmpfs_t:s0 In order to do this, a new audit_inode_parent_hidden() function is added. If we do it this way, then we avoid having the existing callers of audit_inode needing to do any sort of flag conversion if auditing is inactive. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reported-by: Jiri Jaburek <jjaburek@redhat.com> Cc: Steve Grubb <sgrubb@redhat.com> Cc: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 02:59:36 +04:00
}
static inline void audit_file(struct file *file)
{
if (unlikely(!audit_dummy_context()))
__audit_file(file);
}
audit: fix mq_open and mq_unlink to add the MQ root as a hidden parent audit_names record The old audit PATH records for mq_open looked like this: type=PATH msg=audit(1366282323.982:869): item=1 name=(null) inode=6777 dev=00:0c mode=041777 ouid=0 ogid=0 rdev=00:00 obj=system_u:object_r:tmpfs_t:s15:c0.c1023 type=PATH msg=audit(1366282323.982:869): item=0 name="test_mq" inode=26732 dev=00:0c mode=0100700 ouid=0 ogid=0 rdev=00:00 obj=staff_u:object_r:user_tmpfs_t:s15:c0.c1023 ...with the audit related changes that went into 3.7, they now look like this: type=PATH msg=audit(1366282236.776:3606): item=2 name=(null) inode=66655 dev=00:0c mode=0100700 ouid=0 ogid=0 rdev=00:00 obj=staff_u:object_r:user_tmpfs_t:s15:c0.c1023 type=PATH msg=audit(1366282236.776:3606): item=1 name=(null) inode=6926 dev=00:0c mode=041777 ouid=0 ogid=0 rdev=00:00 obj=system_u:object_r:tmpfs_t:s15:c0.c1023 type=PATH msg=audit(1366282236.776:3606): item=0 name="test_mq" Both of these look wrong to me. As Steve Grubb pointed out: "What we need is 1 PATH record that identifies the MQ. The other PATH records probably should not be there." Fix it to record the mq root as a parent, and flag it such that it should be hidden from view when the names are logged, since the root of the mq filesystem isn't terribly interesting. With this change, we get a single PATH record that looks more like this: type=PATH msg=audit(1368021604.836:484): item=0 name="test_mq" inode=16914 dev=00:0c mode=0100644 ouid=0 ogid=0 rdev=00:00 obj=unconfined_u:object_r:user_tmpfs_t:s0 In order to do this, a new audit_inode_parent_hidden() function is added. If we do it this way, then we avoid having the existing callers of audit_inode needing to do any sort of flag conversion if auditing is inactive. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reported-by: Jiri Jaburek <jjaburek@redhat.com> Cc: Steve Grubb <sgrubb@redhat.com> Cc: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 02:59:36 +04:00
static inline void audit_inode_parent_hidden(struct filename *name,
const struct dentry *dentry)
{
if (unlikely(!audit_dummy_context()))
audit: fix mq_open and mq_unlink to add the MQ root as a hidden parent audit_names record The old audit PATH records for mq_open looked like this: type=PATH msg=audit(1366282323.982:869): item=1 name=(null) inode=6777 dev=00:0c mode=041777 ouid=0 ogid=0 rdev=00:00 obj=system_u:object_r:tmpfs_t:s15:c0.c1023 type=PATH msg=audit(1366282323.982:869): item=0 name="test_mq" inode=26732 dev=00:0c mode=0100700 ouid=0 ogid=0 rdev=00:00 obj=staff_u:object_r:user_tmpfs_t:s15:c0.c1023 ...with the audit related changes that went into 3.7, they now look like this: type=PATH msg=audit(1366282236.776:3606): item=2 name=(null) inode=66655 dev=00:0c mode=0100700 ouid=0 ogid=0 rdev=00:00 obj=staff_u:object_r:user_tmpfs_t:s15:c0.c1023 type=PATH msg=audit(1366282236.776:3606): item=1 name=(null) inode=6926 dev=00:0c mode=041777 ouid=0 ogid=0 rdev=00:00 obj=system_u:object_r:tmpfs_t:s15:c0.c1023 type=PATH msg=audit(1366282236.776:3606): item=0 name="test_mq" Both of these look wrong to me. As Steve Grubb pointed out: "What we need is 1 PATH record that identifies the MQ. The other PATH records probably should not be there." Fix it to record the mq root as a parent, and flag it such that it should be hidden from view when the names are logged, since the root of the mq filesystem isn't terribly interesting. With this change, we get a single PATH record that looks more like this: type=PATH msg=audit(1368021604.836:484): item=0 name="test_mq" inode=16914 dev=00:0c mode=0100644 ouid=0 ogid=0 rdev=00:00 obj=unconfined_u:object_r:user_tmpfs_t:s0 In order to do this, a new audit_inode_parent_hidden() function is added. If we do it this way, then we avoid having the existing callers of audit_inode needing to do any sort of flag conversion if auditing is inactive. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reported-by: Jiri Jaburek <jjaburek@redhat.com> Cc: Steve Grubb <sgrubb@redhat.com> Cc: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 02:59:36 +04:00
__audit_inode(name, dentry,
AUDIT_INODE_PARENT | AUDIT_INODE_HIDDEN);
}
static inline void audit_inode_child(struct inode *parent,
const struct dentry *dentry,
const unsigned char type) {
if (unlikely(!audit_dummy_context()))
__audit_inode_child(parent, dentry, type);
}
void audit_core_dumps(long signr);
static inline void audit_ptrace(struct task_struct *t)
{
if (unlikely(!audit_dummy_context()))
__audit_ptrace(t);
}
/* Private API (for audit.c only) */
extern void __audit_ipc_obj(struct kern_ipc_perm *ipcp);
extern void __audit_ipc_set_perm(unsigned long qbytes, uid_t uid, gid_t gid, umode_t mode);
extern void __audit_bprm(struct linux_binprm *bprm);
extern int __audit_socketcall(int nargs, unsigned long *args);
extern int __audit_sockaddr(int len, void *addr);
extern void __audit_fd_pair(int fd1, int fd2);
2011-07-26 13:26:10 +04:00
extern void __audit_mq_open(int oflag, umode_t mode, struct mq_attr *attr);
extern void __audit_mq_sendrecv(mqd_t mqdes, size_t msg_len, unsigned int msg_prio, const struct timespec64 *abs_timeout);
extern void __audit_mq_notify(mqd_t mqdes, const struct sigevent *notification);
extern void __audit_mq_getsetattr(mqd_t mqdes, struct mq_attr *mqstat);
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 02:39:23 +03:00
extern int __audit_log_bprm_fcaps(struct linux_binprm *bprm,
const struct cred *new,
const struct cred *old);
extern void __audit_log_capset(const struct cred *new, const struct cred *old);
extern void __audit_mmap_fd(int fd, int flags);
extern void __audit_log_kern_module(char *name);
audit: Record fanotify access control decisions The fanotify interface allows user space daemons to make access control decisions. Under common criteria requirements, we need to optionally record decisions based on policy. This patch adds a bit mask, FAN_AUDIT, that a user space daemon can 'or' into the response decision which will tell the kernel that it made a decision and record it. It would be used something like this in user space code: response.response = FAN_DENY | FAN_AUDIT; write(fd, &response, sizeof(struct fanotify_response)); When the syscall ends, the audit system will record the decision as a AUDIT_FANOTIFY auxiliary record to denote that the reason this event occurred is the result of an access control decision from fanotify rather than DAC or MAC policy. A sample event looks like this: type=PATH msg=audit(1504310584.332:290): item=0 name="./evil-ls" inode=1319561 dev=fc:03 mode=0100755 ouid=1000 ogid=1000 rdev=00:00 obj=unconfined_u:object_r:user_home_t:s0 nametype=NORMAL type=CWD msg=audit(1504310584.332:290): cwd="/home/sgrubb" type=SYSCALL msg=audit(1504310584.332:290): arch=c000003e syscall=2 success=no exit=-1 a0=32cb3fca90 a1=0 a2=43 a3=8 items=1 ppid=901 pid=959 auid=1000 uid=1000 gid=1000 euid=1000 suid=1000 fsuid=1000 egid=1000 sgid=1000 fsgid=1000 tty=pts1 ses=3 comm="bash" exe="/usr/bin/bash" subj=unconfined_u:unconfined_r:unconfined_t: s0-s0:c0.c1023 key=(null) type=FANOTIFY msg=audit(1504310584.332:290): resp=2 Prior to using the audit flag, the developer needs to call fanotify_init or'ing in FAN_ENABLE_AUDIT to ensure that the kernel supports auditing. The calling process must also have the CAP_AUDIT_WRITE capability. Signed-off-by: sgrubb <sgrubb@redhat.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2017-10-03 03:21:39 +03:00
extern void __audit_fanotify(unsigned int response);
extern void __audit_tk_injoffset(struct timespec64 offset);
ntp: Audit NTP parameters adjustment Emit an audit record every time selected NTP parameters are modified from userspace (via adjtimex(2) or clock_adjtime(2)). These parameters may be used to indirectly change system clock, and thus their modifications should be audited. Such events will now generate records of type AUDIT_TIME_ADJNTPVAL containing the following fields: - op -- which value was adjusted: - offset -- corresponding to the time_offset variable - freq -- corresponding to the time_freq variable - status -- corresponding to the time_status variable - adjust -- corresponding to the time_adjust variable - tick -- corresponding to the tick_usec variable - tai -- corresponding to the timekeeping's TAI offset - old -- the old value - new -- the new value Example records: type=TIME_ADJNTPVAL msg=audit(1530616044.507:7): op=status old=64 new=8256 type=TIME_ADJNTPVAL msg=audit(1530616044.511:11): op=freq old=0 new=49180377088000 The records of this type will be associated with the corresponding syscall records. An overview of parameter changes that can be done via do_adjtimex() (based on information from Miroslav Lichvar) and whether they are audited: __timekeeping_set_tai_offset() -- sets the offset from the International Atomic Time (AUDITED) NTP variables: time_offset -- can adjust the clock by up to 0.5 seconds per call and also speed it up or slow down by up to about 0.05% (43 seconds per day) (AUDITED) time_freq -- can speed up or slow down by up to about 0.05% (AUDITED) time_status -- can insert/delete leap seconds and it also enables/ disables synchronization of the hardware real-time clock (AUDITED) time_maxerror, time_esterror -- change error estimates used to inform userspace applications (NOT AUDITED) time_constant -- controls the speed of the clock adjustments that are made when time_offset is set (NOT AUDITED) time_adjust -- can temporarily speed up or slow down the clock by up to 0.05% (AUDITED) tick_usec -- a more extreme version of time_freq; can speed up or slow down the clock by up to 10% (AUDITED) Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Reviewed-by: Richard Guy Briggs <rgb@redhat.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-04-10 12:14:20 +03:00
extern void __audit_ntp_log(const struct audit_ntp_data *ad);
extern void __audit_log_nfcfg(const char *name, u8 af, unsigned int nentries,
enum audit_nfcfgop op, gfp_t gfp);
static inline void audit_ipc_obj(struct kern_ipc_perm *ipcp)
{
if (unlikely(!audit_dummy_context()))
__audit_ipc_obj(ipcp);
}
static inline void audit_fd_pair(int fd1, int fd2)
{
if (unlikely(!audit_dummy_context()))
__audit_fd_pair(fd1, fd2);
}
static inline void audit_ipc_set_perm(unsigned long qbytes, uid_t uid, gid_t gid, umode_t mode)
{
if (unlikely(!audit_dummy_context()))
__audit_ipc_set_perm(qbytes, uid, gid, mode);
}
static inline void audit_bprm(struct linux_binprm *bprm)
{
if (unlikely(!audit_dummy_context()))
__audit_bprm(bprm);
}
static inline int audit_socketcall(int nargs, unsigned long *args)
{
if (unlikely(!audit_dummy_context()))
return __audit_socketcall(nargs, args);
return 0;
}
static inline int audit_socketcall_compat(int nargs, u32 *args)
{
unsigned long a[AUDITSC_ARGS];
int i;
if (audit_dummy_context())
return 0;
for (i = 0; i < nargs; i++)
a[i] = (unsigned long)args[i];
return __audit_socketcall(nargs, a);
}
static inline int audit_sockaddr(int len, void *addr)
{
if (unlikely(!audit_dummy_context()))
return __audit_sockaddr(len, addr);
return 0;
}
2011-07-26 13:26:10 +04:00
static inline void audit_mq_open(int oflag, umode_t mode, struct mq_attr *attr)
{
if (unlikely(!audit_dummy_context()))
__audit_mq_open(oflag, mode, attr);
}
static inline void audit_mq_sendrecv(mqd_t mqdes, size_t msg_len, unsigned int msg_prio, const struct timespec64 *abs_timeout)
{
if (unlikely(!audit_dummy_context()))
__audit_mq_sendrecv(mqdes, msg_len, msg_prio, abs_timeout);
}
static inline void audit_mq_notify(mqd_t mqdes, const struct sigevent *notification)
{
if (unlikely(!audit_dummy_context()))
__audit_mq_notify(mqdes, notification);
}
static inline void audit_mq_getsetattr(mqd_t mqdes, struct mq_attr *mqstat)
{
if (unlikely(!audit_dummy_context()))
__audit_mq_getsetattr(mqdes, mqstat);
}
Any time fcaps or a setuid app under SECURE_NOROOT is used to result in a non-zero pE we will crate a new audit record which contains the entire set of known information about the executable in question, fP, fI, fE, fversion and includes the process's pE, pI, pP. Before and after the bprm capability are applied. This record type will only be emitted from execve syscalls. an example of making ping use fcaps instead of setuid: setcap "cat_net_raw+pe" /bin/ping type=SYSCALL msg=audit(1225742021.015:236): arch=c000003e syscall=59 success=yes exit=0 a0=1457f30 a1=14606b0 a2=1463940 a3=321b770a70 items=2 ppid=2929 pid=2963 auid=0 uid=500 gid=500 euid=500 suid=500 fsuid=500 egid=500 sgid=500 fsgid=500 tty=pts0 ses=3 comm="ping" exe="/bin/ping" subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 key=(null) type=UNKNOWN[1321] msg=audit(1225742021.015:236): fver=2 fp=0000000000002000 fi=0000000000000000 fe=1 old_pp=0000000000000000 old_pi=0000000000000000 old_pe=0000000000000000 new_pp=0000000000002000 new_pi=0000000000000000 new_pe=0000000000002000 type=EXECVE msg=audit(1225742021.015:236): argc=2 a0="ping" a1="127.0.0.1" type=CWD msg=audit(1225742021.015:236): cwd="/home/test" type=PATH msg=audit(1225742021.015:236): item=0 name="/bin/ping" inode=49256 dev=fd:00 mode=0100755 ouid=0 ogid=0 rdev=00:00 obj=system_u:object_r:ping_exec_t:s0 cap_fp=0000000000002000 cap_fe=1 cap_fver=2 type=PATH msg=audit(1225742021.015:236): item=1 name=(null) inode=507915 dev=fd:00 mode=0100755 ouid=0 ogid=0 rdev=00:00 obj=system_u:object_r:ld_so_t:s0 Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-11 13:48:18 +03:00
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 02:39:23 +03:00
static inline int audit_log_bprm_fcaps(struct linux_binprm *bprm,
const struct cred *new,
const struct cred *old)
Any time fcaps or a setuid app under SECURE_NOROOT is used to result in a non-zero pE we will crate a new audit record which contains the entire set of known information about the executable in question, fP, fI, fE, fversion and includes the process's pE, pI, pP. Before and after the bprm capability are applied. This record type will only be emitted from execve syscalls. an example of making ping use fcaps instead of setuid: setcap "cat_net_raw+pe" /bin/ping type=SYSCALL msg=audit(1225742021.015:236): arch=c000003e syscall=59 success=yes exit=0 a0=1457f30 a1=14606b0 a2=1463940 a3=321b770a70 items=2 ppid=2929 pid=2963 auid=0 uid=500 gid=500 euid=500 suid=500 fsuid=500 egid=500 sgid=500 fsgid=500 tty=pts0 ses=3 comm="ping" exe="/bin/ping" subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 key=(null) type=UNKNOWN[1321] msg=audit(1225742021.015:236): fver=2 fp=0000000000002000 fi=0000000000000000 fe=1 old_pp=0000000000000000 old_pi=0000000000000000 old_pe=0000000000000000 new_pp=0000000000002000 new_pi=0000000000000000 new_pe=0000000000002000 type=EXECVE msg=audit(1225742021.015:236): argc=2 a0="ping" a1="127.0.0.1" type=CWD msg=audit(1225742021.015:236): cwd="/home/test" type=PATH msg=audit(1225742021.015:236): item=0 name="/bin/ping" inode=49256 dev=fd:00 mode=0100755 ouid=0 ogid=0 rdev=00:00 obj=system_u:object_r:ping_exec_t:s0 cap_fp=0000000000002000 cap_fe=1 cap_fver=2 type=PATH msg=audit(1225742021.015:236): item=1 name=(null) inode=507915 dev=fd:00 mode=0100755 ouid=0 ogid=0 rdev=00:00 obj=system_u:object_r:ld_so_t:s0 Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-11 13:48:18 +03:00
{
if (unlikely(!audit_dummy_context()))
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 02:39:23 +03:00
return __audit_log_bprm_fcaps(bprm, new, old);
return 0;
Any time fcaps or a setuid app under SECURE_NOROOT is used to result in a non-zero pE we will crate a new audit record which contains the entire set of known information about the executable in question, fP, fI, fE, fversion and includes the process's pE, pI, pP. Before and after the bprm capability are applied. This record type will only be emitted from execve syscalls. an example of making ping use fcaps instead of setuid: setcap "cat_net_raw+pe" /bin/ping type=SYSCALL msg=audit(1225742021.015:236): arch=c000003e syscall=59 success=yes exit=0 a0=1457f30 a1=14606b0 a2=1463940 a3=321b770a70 items=2 ppid=2929 pid=2963 auid=0 uid=500 gid=500 euid=500 suid=500 fsuid=500 egid=500 sgid=500 fsgid=500 tty=pts0 ses=3 comm="ping" exe="/bin/ping" subj=unconfined_u:unconfined_r:unconfined_t:s0-s0:c0.c1023 key=(null) type=UNKNOWN[1321] msg=audit(1225742021.015:236): fver=2 fp=0000000000002000 fi=0000000000000000 fe=1 old_pp=0000000000000000 old_pi=0000000000000000 old_pe=0000000000000000 new_pp=0000000000002000 new_pi=0000000000000000 new_pe=0000000000002000 type=EXECVE msg=audit(1225742021.015:236): argc=2 a0="ping" a1="127.0.0.1" type=CWD msg=audit(1225742021.015:236): cwd="/home/test" type=PATH msg=audit(1225742021.015:236): item=0 name="/bin/ping" inode=49256 dev=fd:00 mode=0100755 ouid=0 ogid=0 rdev=00:00 obj=system_u:object_r:ping_exec_t:s0 cap_fp=0000000000002000 cap_fe=1 cap_fver=2 type=PATH msg=audit(1225742021.015:236): item=1 name=(null) inode=507915 dev=fd:00 mode=0100755 ouid=0 ogid=0 rdev=00:00 obj=system_u:object_r:ld_so_t:s0 Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-11 13:48:18 +03:00
}
static inline void audit_log_capset(const struct cred *new,
CRED: Inaugurate COW credentials Inaugurate copy-on-write credentials management. This uses RCU to manage the credentials pointer in the task_struct with respect to accesses by other tasks. A process may only modify its own credentials, and so does not need locking to access or modify its own credentials. A mutex (cred_replace_mutex) is added to the task_struct to control the effect of PTRACE_ATTACHED on credential calculations, particularly with respect to execve(). With this patch, the contents of an active credentials struct may not be changed directly; rather a new set of credentials must be prepared, modified and committed using something like the following sequence of events: struct cred *new = prepare_creds(); int ret = blah(new); if (ret < 0) { abort_creds(new); return ret; } return commit_creds(new); There are some exceptions to this rule: the keyrings pointed to by the active credentials may be instantiated - keyrings violate the COW rule as managing COW keyrings is tricky, given that it is possible for a task to directly alter the keys in a keyring in use by another task. To help enforce this, various pointers to sets of credentials, such as those in the task_struct, are declared const. The purpose of this is compile-time discouragement of altering credentials through those pointers. Once a set of credentials has been made public through one of these pointers, it may not be modified, except under special circumstances: (1) Its reference count may incremented and decremented. (2) The keyrings to which it points may be modified, but not replaced. The only safe way to modify anything else is to create a replacement and commit using the functions described in Documentation/credentials.txt (which will be added by a later patch). This patch and the preceding patches have been tested with the LTP SELinux testsuite. This patch makes several logical sets of alteration: (1) execve(). This now prepares and commits credentials in various places in the security code rather than altering the current creds directly. (2) Temporary credential overrides. do_coredump() and sys_faccessat() now prepare their own credentials and temporarily override the ones currently on the acting thread, whilst preventing interference from other threads by holding cred_replace_mutex on the thread being dumped. This will be replaced in a future patch by something that hands down the credentials directly to the functions being called, rather than altering the task's objective credentials. (3) LSM interface. A number of functions have been changed, added or removed: (*) security_capset_check(), ->capset_check() (*) security_capset_set(), ->capset_set() Removed in favour of security_capset(). (*) security_capset(), ->capset() New. This is passed a pointer to the new creds, a pointer to the old creds and the proposed capability sets. It should fill in the new creds or return an error. All pointers, barring the pointer to the new creds, are now const. (*) security_bprm_apply_creds(), ->bprm_apply_creds() Changed; now returns a value, which will cause the process to be killed if it's an error. (*) security_task_alloc(), ->task_alloc_security() Removed in favour of security_prepare_creds(). (*) security_cred_free(), ->cred_free() New. Free security data attached to cred->security. (*) security_prepare_creds(), ->cred_prepare() New. Duplicate any security data attached to cred->security. (*) security_commit_creds(), ->cred_commit() New. Apply any security effects for the upcoming installation of new security by commit_creds(). (*) security_task_post_setuid(), ->task_post_setuid() Removed in favour of security_task_fix_setuid(). (*) security_task_fix_setuid(), ->task_fix_setuid() Fix up the proposed new credentials for setuid(). This is used by cap_set_fix_setuid() to implicitly adjust capabilities in line with setuid() changes. Changes are made to the new credentials, rather than the task itself as in security_task_post_setuid(). (*) security_task_reparent_to_init(), ->task_reparent_to_init() Removed. Instead the task being reparented to init is referred directly to init's credentials. NOTE! This results in the loss of some state: SELinux's osid no longer records the sid of the thread that forked it. (*) security_key_alloc(), ->key_alloc() (*) security_key_permission(), ->key_permission() Changed. These now take cred pointers rather than task pointers to refer to the security context. (4) sys_capset(). This has been simplified and uses less locking. The LSM functions it calls have been merged. (5) reparent_to_kthreadd(). This gives the current thread the same credentials as init by simply using commit_thread() to point that way. (6) __sigqueue_alloc() and switch_uid() __sigqueue_alloc() can't stop the target task from changing its creds beneath it, so this function gets a reference to the currently applicable user_struct which it then passes into the sigqueue struct it returns if successful. switch_uid() is now called from commit_creds(), and possibly should be folded into that. commit_creds() should take care of protecting __sigqueue_alloc(). (7) [sg]et[ug]id() and co and [sg]et_current_groups. The set functions now all use prepare_creds(), commit_creds() and abort_creds() to build and check a new set of credentials before applying it. security_task_set[ug]id() is called inside the prepared section. This guarantees that nothing else will affect the creds until we've finished. The calling of set_dumpable() has been moved into commit_creds(). Much of the functionality of set_user() has been moved into commit_creds(). The get functions all simply access the data directly. (8) security_task_prctl() and cap_task_prctl(). security_task_prctl() has been modified to return -ENOSYS if it doesn't want to handle a function, or otherwise return the return value directly rather than through an argument. Additionally, cap_task_prctl() now prepares a new set of credentials, even if it doesn't end up using it. (9) Keyrings. A number of changes have been made to the keyrings code: (a) switch_uid_keyring(), copy_keys(), exit_keys() and suid_keys() have all been dropped and built in to the credentials functions directly. They may want separating out again later. (b) key_alloc() and search_process_keyrings() now take a cred pointer rather than a task pointer to specify the security context. (c) copy_creds() gives a new thread within the same thread group a new thread keyring if its parent had one, otherwise it discards the thread keyring. (d) The authorisation key now points directly to the credentials to extend the search into rather pointing to the task that carries them. (e) Installing thread, process or session keyrings causes a new set of credentials to be created, even though it's not strictly necessary for process or session keyrings (they're shared). (10) Usermode helper. The usermode helper code now carries a cred struct pointer in its subprocess_info struct instead of a new session keyring pointer. This set of credentials is derived from init_cred and installed on the new process after it has been cloned. call_usermodehelper_setup() allocates the new credentials and call_usermodehelper_freeinfo() discards them if they haven't been used. A special cred function (prepare_usermodeinfo_creds()) is provided specifically for call_usermodehelper_setup() to call. call_usermodehelper_setkeys() adjusts the credentials to sport the supplied keyring as the new session keyring. (11) SELinux. SELinux has a number of changes, in addition to those to support the LSM interface changes mentioned above: (a) selinux_setprocattr() no longer does its check for whether the current ptracer can access processes with the new SID inside the lock that covers getting the ptracer's SID. Whilst this lock ensures that the check is done with the ptracer pinned, the result is only valid until the lock is released, so there's no point doing it inside the lock. (12) is_single_threaded(). This function has been extracted from selinux_setprocattr() and put into a file of its own in the lib/ directory as join_session_keyring() now wants to use it too. The code in SELinux just checked to see whether a task shared mm_structs with other tasks (CLONE_VM), but that isn't good enough. We really want to know if they're part of the same thread group (CLONE_THREAD). (13) nfsd. The NFS server daemon now has to use the COW credentials to set the credentials it is going to use. It really needs to pass the credentials down to the functions it calls, but it can't do that until other patches in this series have been applied. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: James Morris <jmorris@namei.org> Signed-off-by: James Morris <jmorris@namei.org>
2008-11-14 02:39:23 +03:00
const struct cred *old)
{
if (unlikely(!audit_dummy_context()))
__audit_log_capset(new, old);
}
static inline void audit_mmap_fd(int fd, int flags)
{
if (unlikely(!audit_dummy_context()))
__audit_mmap_fd(fd, flags);
}
static inline void audit_log_kern_module(char *name)
{
if (!audit_dummy_context())
__audit_log_kern_module(name);
}
audit: Record fanotify access control decisions The fanotify interface allows user space daemons to make access control decisions. Under common criteria requirements, we need to optionally record decisions based on policy. This patch adds a bit mask, FAN_AUDIT, that a user space daemon can 'or' into the response decision which will tell the kernel that it made a decision and record it. It would be used something like this in user space code: response.response = FAN_DENY | FAN_AUDIT; write(fd, &response, sizeof(struct fanotify_response)); When the syscall ends, the audit system will record the decision as a AUDIT_FANOTIFY auxiliary record to denote that the reason this event occurred is the result of an access control decision from fanotify rather than DAC or MAC policy. A sample event looks like this: type=PATH msg=audit(1504310584.332:290): item=0 name="./evil-ls" inode=1319561 dev=fc:03 mode=0100755 ouid=1000 ogid=1000 rdev=00:00 obj=unconfined_u:object_r:user_home_t:s0 nametype=NORMAL type=CWD msg=audit(1504310584.332:290): cwd="/home/sgrubb" type=SYSCALL msg=audit(1504310584.332:290): arch=c000003e syscall=2 success=no exit=-1 a0=32cb3fca90 a1=0 a2=43 a3=8 items=1 ppid=901 pid=959 auid=1000 uid=1000 gid=1000 euid=1000 suid=1000 fsuid=1000 egid=1000 sgid=1000 fsgid=1000 tty=pts1 ses=3 comm="bash" exe="/usr/bin/bash" subj=unconfined_u:unconfined_r:unconfined_t: s0-s0:c0.c1023 key=(null) type=FANOTIFY msg=audit(1504310584.332:290): resp=2 Prior to using the audit flag, the developer needs to call fanotify_init or'ing in FAN_ENABLE_AUDIT to ensure that the kernel supports auditing. The calling process must also have the CAP_AUDIT_WRITE capability. Signed-off-by: sgrubb <sgrubb@redhat.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2017-10-03 03:21:39 +03:00
static inline void audit_fanotify(unsigned int response)
{
if (!audit_dummy_context())
__audit_fanotify(response);
}
static inline void audit_tk_injoffset(struct timespec64 offset)
{
/* ignore no-op events */
if (offset.tv_sec == 0 && offset.tv_nsec == 0)
return;
if (!audit_dummy_context())
__audit_tk_injoffset(offset);
}
ntp: Audit NTP parameters adjustment Emit an audit record every time selected NTP parameters are modified from userspace (via adjtimex(2) or clock_adjtime(2)). These parameters may be used to indirectly change system clock, and thus their modifications should be audited. Such events will now generate records of type AUDIT_TIME_ADJNTPVAL containing the following fields: - op -- which value was adjusted: - offset -- corresponding to the time_offset variable - freq -- corresponding to the time_freq variable - status -- corresponding to the time_status variable - adjust -- corresponding to the time_adjust variable - tick -- corresponding to the tick_usec variable - tai -- corresponding to the timekeeping's TAI offset - old -- the old value - new -- the new value Example records: type=TIME_ADJNTPVAL msg=audit(1530616044.507:7): op=status old=64 new=8256 type=TIME_ADJNTPVAL msg=audit(1530616044.511:11): op=freq old=0 new=49180377088000 The records of this type will be associated with the corresponding syscall records. An overview of parameter changes that can be done via do_adjtimex() (based on information from Miroslav Lichvar) and whether they are audited: __timekeeping_set_tai_offset() -- sets the offset from the International Atomic Time (AUDITED) NTP variables: time_offset -- can adjust the clock by up to 0.5 seconds per call and also speed it up or slow down by up to about 0.05% (43 seconds per day) (AUDITED) time_freq -- can speed up or slow down by up to about 0.05% (AUDITED) time_status -- can insert/delete leap seconds and it also enables/ disables synchronization of the hardware real-time clock (AUDITED) time_maxerror, time_esterror -- change error estimates used to inform userspace applications (NOT AUDITED) time_constant -- controls the speed of the clock adjustments that are made when time_offset is set (NOT AUDITED) time_adjust -- can temporarily speed up or slow down the clock by up to 0.05% (AUDITED) tick_usec -- a more extreme version of time_freq; can speed up or slow down the clock by up to 10% (AUDITED) Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Reviewed-by: Richard Guy Briggs <rgb@redhat.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-04-10 12:14:20 +03:00
static inline void audit_ntp_init(struct audit_ntp_data *ad)
{
memset(ad, 0, sizeof(*ad));
}
static inline void audit_ntp_set_old(struct audit_ntp_data *ad,
enum audit_ntp_type type, long long val)
{
ad->vals[type].oldval = val;
}
static inline void audit_ntp_set_new(struct audit_ntp_data *ad,
enum audit_ntp_type type, long long val)
{
ad->vals[type].newval = val;
}
static inline void audit_ntp_log(const struct audit_ntp_data *ad)
{
if (!audit_dummy_context())
__audit_ntp_log(ad);
}
static inline void audit_log_nfcfg(const char *name, u8 af,
unsigned int nentries,
enum audit_nfcfgop op, gfp_t gfp)
{
if (audit_enabled)
__audit_log_nfcfg(name, af, nentries, op, gfp);
}
extern int audit_n_rules;
extern int audit_signals;
Audit: push audit success and retcode into arch ptrace.h The audit system previously expected arches calling to audit_syscall_exit to supply as arguments if the syscall was a success and what the return code was. Audit also provides a helper AUDITSC_RESULT which was supposed to simplify things by converting from negative retcodes to an audit internal magic value stating success or failure. This helper was wrong and could indicate that a valid pointer returned to userspace was a failed syscall. The fix is to fix the layering foolishness. We now pass audit_syscall_exit a struct pt_reg and it in turns calls back into arch code to collect the return value and to determine if the syscall was a success or failure. We also define a generic is_syscall_success() macro which determines success/failure based on if the value is < -MAX_ERRNO. This works for arches like x86 which do not use a separate mechanism to indicate syscall failure. We make both the is_syscall_success() and regs_return_value() static inlines instead of macros. The reason is because the audit function must take a void* for the regs. (uml calls theirs struct uml_pt_regs instead of just struct pt_regs so audit_syscall_exit can't take a struct pt_regs). Since the audit function takes a void* we need to use static inlines to cast it back to the arch correct structure to dereference it. The other major change is that on some arches, like ia64, MIPS and ppc, we change regs_return_value() to give us the negative value on syscall failure. THE only other user of this macro, kretprobe_example.c, won't notice and it makes the value signed consistently for the audit functions across all archs. In arch/sh/kernel/ptrace_64.c I see that we were using regs[9] in the old audit code as the return value. But the ptrace_64.h code defined the macro regs_return_value() as regs[3]. I have no idea which one is correct, but this patch now uses the regs_return_value() function, so it now uses regs[3]. For powerpc we previously used regs->result but now use the regs_return_value() function which uses regs->gprs[3]. regs->gprs[3] is always positive so the regs_return_value(), much like ia64 makes it negative before calling the audit code when appropriate. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: H. Peter Anvin <hpa@zytor.com> [for x86 portion] Acked-by: Tony Luck <tony.luck@intel.com> [for ia64] Acked-by: Richard Weinberger <richard@nod.at> [for uml] Acked-by: David S. Miller <davem@davemloft.net> [for sparc] Acked-by: Ralf Baechle <ralf@linux-mips.org> [for mips] Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [for ppc]
2012-01-03 23:23:06 +04:00
#else /* CONFIG_AUDITSYSCALL */
static inline int audit_alloc(struct task_struct *task)
{
return 0;
}
static inline void audit_free(struct task_struct *task)
{ }
static inline void audit_syscall_entry(int major, unsigned long a0,
unsigned long a1, unsigned long a2,
unsigned long a3)
{ }
static inline void audit_syscall_exit(void *pt_regs)
{ }
static inline bool audit_dummy_context(void)
{
return true;
}
static inline void audit_set_context(struct task_struct *task, struct audit_context *ctx)
{ }
static inline struct audit_context *audit_context(void)
{
return NULL;
}
static inline struct filename *audit_reusename(const __user char *name)
{
return NULL;
}
static inline void audit_getname(struct filename *name)
{ }
static inline void audit_inode(struct filename *name,
const struct dentry *dentry,
unsigned int aflags)
{ }
static inline void audit_file(struct file *file)
{
}
audit: fix mq_open and mq_unlink to add the MQ root as a hidden parent audit_names record The old audit PATH records for mq_open looked like this: type=PATH msg=audit(1366282323.982:869): item=1 name=(null) inode=6777 dev=00:0c mode=041777 ouid=0 ogid=0 rdev=00:00 obj=system_u:object_r:tmpfs_t:s15:c0.c1023 type=PATH msg=audit(1366282323.982:869): item=0 name="test_mq" inode=26732 dev=00:0c mode=0100700 ouid=0 ogid=0 rdev=00:00 obj=staff_u:object_r:user_tmpfs_t:s15:c0.c1023 ...with the audit related changes that went into 3.7, they now look like this: type=PATH msg=audit(1366282236.776:3606): item=2 name=(null) inode=66655 dev=00:0c mode=0100700 ouid=0 ogid=0 rdev=00:00 obj=staff_u:object_r:user_tmpfs_t:s15:c0.c1023 type=PATH msg=audit(1366282236.776:3606): item=1 name=(null) inode=6926 dev=00:0c mode=041777 ouid=0 ogid=0 rdev=00:00 obj=system_u:object_r:tmpfs_t:s15:c0.c1023 type=PATH msg=audit(1366282236.776:3606): item=0 name="test_mq" Both of these look wrong to me. As Steve Grubb pointed out: "What we need is 1 PATH record that identifies the MQ. The other PATH records probably should not be there." Fix it to record the mq root as a parent, and flag it such that it should be hidden from view when the names are logged, since the root of the mq filesystem isn't terribly interesting. With this change, we get a single PATH record that looks more like this: type=PATH msg=audit(1368021604.836:484): item=0 name="test_mq" inode=16914 dev=00:0c mode=0100644 ouid=0 ogid=0 rdev=00:00 obj=unconfined_u:object_r:user_tmpfs_t:s0 In order to do this, a new audit_inode_parent_hidden() function is added. If we do it this way, then we avoid having the existing callers of audit_inode needing to do any sort of flag conversion if auditing is inactive. Signed-off-by: Jeff Layton <jlayton@redhat.com> Reported-by: Jiri Jaburek <jjaburek@redhat.com> Cc: Steve Grubb <sgrubb@redhat.com> Cc: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-09 02:59:36 +04:00
static inline void audit_inode_parent_hidden(struct filename *name,
const struct dentry *dentry)
{ }
static inline void audit_inode_child(struct inode *parent,
const struct dentry *dentry,
const unsigned char type)
{ }
static inline void audit_core_dumps(long signr)
{ }
static inline void audit_seccomp(unsigned long syscall, long signr, int code)
{ }
seccomp: Audit attempts to modify the actions_logged sysctl The decision to log a seccomp action will always be subject to the value of the kernel.seccomp.actions_logged sysctl, even for processes that are being inspected via the audit subsystem, in an upcoming patch. Therefore, we need to emit an audit record on attempts at writing to the actions_logged sysctl when auditing is enabled. This patch updates the write handler for the actions_logged sysctl to emit an audit record on attempts to write to the sysctl. Successful writes to the sysctl will result in a record that includes a normalized list of logged actions in the "actions" field and a "res" field equal to 1. Unsuccessful writes to the sysctl will result in a record that doesn't include the "actions" field and has a "res" field equal to 0. Not all unsuccessful writes to the sysctl are audited. For example, an audit record will not be emitted if an unprivileged process attempts to open the sysctl file for reading since that access control check is not part of the sysctl's write handler. Below are some example audit records when writing various strings to the actions_logged sysctl. Writing "not-a-real-action", when the kernel.seccomp.actions_logged sysctl previously was "kill_process kill_thread trap errno trace log", emits this audit record: type=CONFIG_CHANGE msg=audit(1525392371.454:120): op=seccomp-logging actions=? old-actions=kill_process,kill_thread,trap,errno,trace,log res=0 If you then write "kill_process kill_thread errno trace log", this audit record is emitted: type=CONFIG_CHANGE msg=audit(1525392401.645:126): op=seccomp-logging actions=kill_process,kill_thread,errno,trace,log old-actions=kill_process,kill_thread,trap,errno,trace,log res=1 If you then write "log log errno trace kill_process kill_thread", which is unordered and contains the log action twice, it results in the same actions value as the previous record: type=CONFIG_CHANGE msg=audit(1525392436.354:132): op=seccomp-logging actions=kill_process,kill_thread,errno,trace,log old-actions=kill_process,kill_thread,errno,trace,log res=1 If you then write an empty string to the sysctl, this audit record is emitted: type=CONFIG_CHANGE msg=audit(1525392494.413:138): op=seccomp-logging actions=(none) old-actions=kill_process,kill_thread,errno,trace,log res=1 No audit records are generated when reading the actions_logged sysctl. Suggested-by: Steve Grubb <sgrubb@redhat.com> Signed-off-by: Tyler Hicks <tyhicks@canonical.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Paul Moore <paul@paul-moore.com>
2018-05-04 04:08:14 +03:00
static inline void audit_seccomp_actions_logged(const char *names,
const char *old_names, int res)
{ }
static inline void audit_ipc_obj(struct kern_ipc_perm *ipcp)
{ }
static inline void audit_ipc_set_perm(unsigned long qbytes, uid_t uid,
gid_t gid, umode_t mode)
{ }
static inline void audit_bprm(struct linux_binprm *bprm)
{ }
static inline int audit_socketcall(int nargs, unsigned long *args)
{
return 0;
}
static inline int audit_socketcall_compat(int nargs, u32 *args)
{
return 0;
}
static inline void audit_fd_pair(int fd1, int fd2)
{ }
static inline int audit_sockaddr(int len, void *addr)
{
return 0;
}
static inline void audit_mq_open(int oflag, umode_t mode, struct mq_attr *attr)
{ }
static inline void audit_mq_sendrecv(mqd_t mqdes, size_t msg_len,
unsigned int msg_prio,
const struct timespec64 *abs_timeout)
{ }
static inline void audit_mq_notify(mqd_t mqdes,
const struct sigevent *notification)
{ }
static inline void audit_mq_getsetattr(mqd_t mqdes, struct mq_attr *mqstat)
{ }
static inline int audit_log_bprm_fcaps(struct linux_binprm *bprm,
const struct cred *new,
const struct cred *old)
{
return 0;
}
static inline void audit_log_capset(const struct cred *new,
const struct cred *old)
{ }
static inline void audit_mmap_fd(int fd, int flags)
{ }
static inline void audit_log_kern_module(char *name)
{
}
audit: Record fanotify access control decisions The fanotify interface allows user space daemons to make access control decisions. Under common criteria requirements, we need to optionally record decisions based on policy. This patch adds a bit mask, FAN_AUDIT, that a user space daemon can 'or' into the response decision which will tell the kernel that it made a decision and record it. It would be used something like this in user space code: response.response = FAN_DENY | FAN_AUDIT; write(fd, &response, sizeof(struct fanotify_response)); When the syscall ends, the audit system will record the decision as a AUDIT_FANOTIFY auxiliary record to denote that the reason this event occurred is the result of an access control decision from fanotify rather than DAC or MAC policy. A sample event looks like this: type=PATH msg=audit(1504310584.332:290): item=0 name="./evil-ls" inode=1319561 dev=fc:03 mode=0100755 ouid=1000 ogid=1000 rdev=00:00 obj=unconfined_u:object_r:user_home_t:s0 nametype=NORMAL type=CWD msg=audit(1504310584.332:290): cwd="/home/sgrubb" type=SYSCALL msg=audit(1504310584.332:290): arch=c000003e syscall=2 success=no exit=-1 a0=32cb3fca90 a1=0 a2=43 a3=8 items=1 ppid=901 pid=959 auid=1000 uid=1000 gid=1000 euid=1000 suid=1000 fsuid=1000 egid=1000 sgid=1000 fsgid=1000 tty=pts1 ses=3 comm="bash" exe="/usr/bin/bash" subj=unconfined_u:unconfined_r:unconfined_t: s0-s0:c0.c1023 key=(null) type=FANOTIFY msg=audit(1504310584.332:290): resp=2 Prior to using the audit flag, the developer needs to call fanotify_init or'ing in FAN_ENABLE_AUDIT to ensure that the kernel supports auditing. The calling process must also have the CAP_AUDIT_WRITE capability. Signed-off-by: sgrubb <sgrubb@redhat.com> Reviewed-by: Amir Goldstein <amir73il@gmail.com> Signed-off-by: Jan Kara <jack@suse.cz>
2017-10-03 03:21:39 +03:00
static inline void audit_fanotify(unsigned int response)
{ }
static inline void audit_tk_injoffset(struct timespec64 offset)
{ }
ntp: Audit NTP parameters adjustment Emit an audit record every time selected NTP parameters are modified from userspace (via adjtimex(2) or clock_adjtime(2)). These parameters may be used to indirectly change system clock, and thus their modifications should be audited. Such events will now generate records of type AUDIT_TIME_ADJNTPVAL containing the following fields: - op -- which value was adjusted: - offset -- corresponding to the time_offset variable - freq -- corresponding to the time_freq variable - status -- corresponding to the time_status variable - adjust -- corresponding to the time_adjust variable - tick -- corresponding to the tick_usec variable - tai -- corresponding to the timekeeping's TAI offset - old -- the old value - new -- the new value Example records: type=TIME_ADJNTPVAL msg=audit(1530616044.507:7): op=status old=64 new=8256 type=TIME_ADJNTPVAL msg=audit(1530616044.511:11): op=freq old=0 new=49180377088000 The records of this type will be associated with the corresponding syscall records. An overview of parameter changes that can be done via do_adjtimex() (based on information from Miroslav Lichvar) and whether they are audited: __timekeeping_set_tai_offset() -- sets the offset from the International Atomic Time (AUDITED) NTP variables: time_offset -- can adjust the clock by up to 0.5 seconds per call and also speed it up or slow down by up to about 0.05% (43 seconds per day) (AUDITED) time_freq -- can speed up or slow down by up to about 0.05% (AUDITED) time_status -- can insert/delete leap seconds and it also enables/ disables synchronization of the hardware real-time clock (AUDITED) time_maxerror, time_esterror -- change error estimates used to inform userspace applications (NOT AUDITED) time_constant -- controls the speed of the clock adjustments that are made when time_offset is set (NOT AUDITED) time_adjust -- can temporarily speed up or slow down the clock by up to 0.05% (AUDITED) tick_usec -- a more extreme version of time_freq; can speed up or slow down the clock by up to 10% (AUDITED) Signed-off-by: Ondrej Mosnacek <omosnace@redhat.com> Reviewed-by: Richard Guy Briggs <rgb@redhat.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul Moore <paul@paul-moore.com>
2019-04-10 12:14:20 +03:00
static inline void audit_ntp_init(struct audit_ntp_data *ad)
{ }
static inline void audit_ntp_set_old(struct audit_ntp_data *ad,
enum audit_ntp_type type, long long val)
{ }
static inline void audit_ntp_set_new(struct audit_ntp_data *ad,
enum audit_ntp_type type, long long val)
{ }
static inline void audit_ntp_log(const struct audit_ntp_data *ad)
{ }
static inline void audit_ptrace(struct task_struct *t)
{ }
static inline void audit_log_nfcfg(const char *name, u8 af,
unsigned int nentries,
enum audit_nfcfgop op, gfp_t gfp)
{ }
#define audit_n_rules 0
#define audit_signals 0
Audit: push audit success and retcode into arch ptrace.h The audit system previously expected arches calling to audit_syscall_exit to supply as arguments if the syscall was a success and what the return code was. Audit also provides a helper AUDITSC_RESULT which was supposed to simplify things by converting from negative retcodes to an audit internal magic value stating success or failure. This helper was wrong and could indicate that a valid pointer returned to userspace was a failed syscall. The fix is to fix the layering foolishness. We now pass audit_syscall_exit a struct pt_reg and it in turns calls back into arch code to collect the return value and to determine if the syscall was a success or failure. We also define a generic is_syscall_success() macro which determines success/failure based on if the value is < -MAX_ERRNO. This works for arches like x86 which do not use a separate mechanism to indicate syscall failure. We make both the is_syscall_success() and regs_return_value() static inlines instead of macros. The reason is because the audit function must take a void* for the regs. (uml calls theirs struct uml_pt_regs instead of just struct pt_regs so audit_syscall_exit can't take a struct pt_regs). Since the audit function takes a void* we need to use static inlines to cast it back to the arch correct structure to dereference it. The other major change is that on some arches, like ia64, MIPS and ppc, we change regs_return_value() to give us the negative value on syscall failure. THE only other user of this macro, kretprobe_example.c, won't notice and it makes the value signed consistently for the audit functions across all archs. In arch/sh/kernel/ptrace_64.c I see that we were using regs[9] in the old audit code as the return value. But the ptrace_64.h code defined the macro regs_return_value() as regs[3]. I have no idea which one is correct, but this patch now uses the regs_return_value() function, so it now uses regs[3]. For powerpc we previously used regs->result but now use the regs_return_value() function which uses regs->gprs[3]. regs->gprs[3] is always positive so the regs_return_value(), much like ia64 makes it negative before calling the audit code when appropriate. Signed-off-by: Eric Paris <eparis@redhat.com> Acked-by: H. Peter Anvin <hpa@zytor.com> [for x86 portion] Acked-by: Tony Luck <tony.luck@intel.com> [for ia64] Acked-by: Richard Weinberger <richard@nod.at> [for uml] Acked-by: David S. Miller <davem@davemloft.net> [for sparc] Acked-by: Ralf Baechle <ralf@linux-mips.org> [for mips] Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> [for ppc]
2012-01-03 23:23:06 +04:00
#endif /* CONFIG_AUDITSYSCALL */
static inline bool audit_loginuid_set(struct task_struct *tsk)
{
return uid_valid(audit_get_loginuid(tsk));
}
#endif