microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/fs/xfs/xfs_log.h

149 строки
4.3 KiB
C
Исходник Обычный вид История

xfs: convert to SPDX license tags Remove the verbose license text from XFS files and replace them with SPDX tags. This does not change the license of any of the code, merely refers to the common, up-to-date license files in LICENSES/ This change was mostly scripted. fs/xfs/Makefile and fs/xfs/libxfs/xfs_fs.h were modified by hand, the rest were detected and modified by the following command: for f in `git grep -l "GNU General" fs/xfs/` ; do echo $f cat $f | awk -f hdr.awk > $f.new mv -f $f.new $f done And the hdr.awk script that did the modification (including detecting the difference between GPL-2.0 and GPL-2.0+ licenses) is as follows: $ cat hdr.awk BEGIN { hdr = 1.0 tag = "GPL-2.0" str = "" } /^ \* This program is free software/ { hdr = 2.0; next } /any later version./ { tag = "GPL-2.0+" next } /^ \*\// { if (hdr > 0.0) { print "// SPDX-License-Identifier: " tag print str print $0 str="" hdr = 0.0 next } print $0 next } /^ \* / { if (hdr > 1.0) next if (hdr > 0.0) { if (str != "") str = str "\n" str = str $0 next } print $0 next } /^ \*/ { if (hdr > 0.0) next print $0 next } // { if (hdr > 0.0) { if (str != "") str = str "\n" str = str $0 next } print $0 } END { } $ Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-06 05:42:14 +03:00
// SPDX-License-Identifier: GPL-2.0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/*
[XFS] Update license/copyright notices to match the prefered SGI boilerplate. SGI-PV: 913862 SGI-Modid: xfs-linux:xfs-kern:23903a Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 06:58:39 +03:00
* Copyright (c) 2000-2003,2005 Silicon Graphics, Inc.
* All Rights Reserved.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
*/
#ifndef __XFS_LOG_H__
#define __XFS_LOG_H__
xfs: use a list_head for iclog callbacks Replace the hand grown linked list handling and cil context attachment with the standard list_head structure. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-06-29 05:27:34 +03:00
struct xfs_cil_ctx;
xfs: separate out log format definitions The on-disk format definitions for the log are spread randoms through a couple of header files. Consolidate it all in a single file that can be shared easily with userspace. This means that xfs_log.h and xfs_log_priv.h no longer need to be shared with userspace. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-12 14:49:22 +04:00
struct xfs_log_vec {
struct xfs_log_vec *lv_next; /* next lv in build list */
int lv_niovecs; /* number of iovecs in lv */
struct xfs_log_iovec *lv_iovecp; /* iovec array */
struct xfs_log_item *lv_item; /* owner */
char *lv_buf; /* formatted buffer */
xfs: log vector rounding leaks log space The addition of direct formatting of log items into the CIL linear buffer added alignment restrictions that the start of each vector needed to be 64 bit aligned. Hence padding was added in xlog_finish_iovec() to round up the vector length to ensure the next vector started with the correct alignment. This adds a small number of bytes to the size of the linear buffer that is otherwise unused. The issue is that we then use the linear buffer size to determine the log space used by the log item, and this includes the unused space. Hence when we account for space used by the log item, it's more than is actually written into the iclogs, and hence we slowly leak this space. This results on log hangs when reserving space, with threads getting stuck with these stack traces: Call Trace: [<ffffffff81d15989>] schedule+0x29/0x70 [<ffffffff8150d3a2>] xlog_grant_head_wait+0xa2/0x1a0 [<ffffffff8150d55d>] xlog_grant_head_check+0xbd/0x140 [<ffffffff8150ee33>] xfs_log_reserve+0x103/0x220 [<ffffffff814b7f05>] xfs_trans_reserve+0x2f5/0x310 ..... The 4 bytes is significant. Brain Foster did all the hard work in tracking down a reproducable leak to inode chunk allocation (it went away with the ikeep mount option). His rough numbers were that creating 50,000 inodes leaked 11 log blocks. This turns out to be roughly 800 inode chunks or 1600 inode cluster buffers. That works out at roughly 4 bytes per cluster buffer logged, and at that I started looking for a 4 byte leak in the buffer logging code. What I found was that a struct xfs_buf_log_format structure for an inode cluster buffer is 28 bytes in length. This gets rounded up to 32 bytes, but the vector length remains 28 bytes. Hence the CIL ticket reservation is decremented by 32 bytes (via lv->lv_buf_len) for that vector rather than 28 bytes which are written into the log. The fix for this problem is to separately track the bytes used by the log vectors in the item and use that instead of the buffer length when accounting for the log space that will be used by the formatted log item. Again, thanks to Brian Foster for doing all the hard work and long hours to isolate this leak and make finding the bug relatively simple. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-05-20 02:18:09 +04:00
int lv_bytes; /* accounted space in buffer */
int lv_buf_len; /* aligned size of buffer */
xfs: Reduce allocations during CIL insertion Now that we have the size of the object before the formatting pass is called, we can allocation the log vector and it's buffer in a single allocation rather than two separate allocations. Store the size of the allocated buffer in the log vector so that we potentially avoid allocation for future modifications of the object. While touching this code, remove the IOP_FORMAT definition. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-12 14:50:05 +04:00
int lv_size; /* size of allocated lv */
xfs: separate out log format definitions The on-disk format definitions for the log are spread randoms through a couple of header files. Consolidate it all in a single file that can be shared easily with userspace. This means that xfs_log.h and xfs_log_priv.h no longer need to be shared with userspace. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-12 14:49:22 +04:00
};
#define XFS_LOG_VEC_ORDERED (-1)
xfs: introduce xlog_copy_iovec Add a helper to abstract out filling the log iovecs in the log item format handlers. This will allow us to change the way we do the log item formatting more easily. The copy in the name is a bit confusing for now as it just assigns a pointer and lets the CIL code perform the copy, but that will change soon. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2013-12-13 04:00:43 +04:00
static inline void *
xfs: format log items write directly into the linear CIL buffer Instead of setting up pointers to memory locations in iop_format which then get copied into the CIL linear buffer after return move the copy into the individual inode items. This avoids the need to always have a memory block in the exact same layout that gets written into the log around, and allow the log items to be much more flexible in their in-memory layouts. The only caveat is that we need to properly align the data for each iovec so that don't have structures misaligned in subsequent iovecs. Note that all log item format routines now need to be careful to modify the copy of the item that was placed into the CIL after calls to xlog_copy_iovec instead of the in-memory copy. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2013-12-13 04:34:02 +04:00
xlog_prepare_iovec(struct xfs_log_vec *lv, struct xfs_log_iovec **vecp,
uint type)
xfs: introduce xlog_copy_iovec Add a helper to abstract out filling the log iovecs in the log item format handlers. This will allow us to change the way we do the log item formatting more easily. The copy in the name is a bit confusing for now as it just assigns a pointer and lets the CIL code perform the copy, but that will change soon. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2013-12-13 04:00:43 +04:00
{
struct xfs_log_iovec *vec = *vecp;
xfs: format log items write directly into the linear CIL buffer Instead of setting up pointers to memory locations in iop_format which then get copied into the CIL linear buffer after return move the copy into the individual inode items. This avoids the need to always have a memory block in the exact same layout that gets written into the log around, and allow the log items to be much more flexible in their in-memory layouts. The only caveat is that we need to properly align the data for each iovec so that don't have structures misaligned in subsequent iovecs. Note that all log item format routines now need to be careful to modify the copy of the item that was placed into the CIL after calls to xlog_copy_iovec instead of the in-memory copy. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2013-12-13 04:34:02 +04:00
if (vec) {
ASSERT(vec - lv->lv_iovecp < lv->lv_niovecs);
vec++;
} else {
vec = &lv->lv_iovecp[0];
}
xfs: introduce xlog_copy_iovec Add a helper to abstract out filling the log iovecs in the log item format handlers. This will allow us to change the way we do the log item formatting more easily. The copy in the name is a bit confusing for now as it just assigns a pointer and lets the CIL code perform the copy, but that will change soon. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2013-12-13 04:00:43 +04:00
vec->i_type = type;
xfs: format log items write directly into the linear CIL buffer Instead of setting up pointers to memory locations in iop_format which then get copied into the CIL linear buffer after return move the copy into the individual inode items. This avoids the need to always have a memory block in the exact same layout that gets written into the log around, and allow the log items to be much more flexible in their in-memory layouts. The only caveat is that we need to properly align the data for each iovec so that don't have structures misaligned in subsequent iovecs. Note that all log item format routines now need to be careful to modify the copy of the item that was placed into the CIL after calls to xlog_copy_iovec instead of the in-memory copy. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2013-12-13 04:34:02 +04:00
vec->i_addr = lv->lv_buf + lv->lv_buf_len;
ASSERT(IS_ALIGNED((unsigned long)vec->i_addr, sizeof(uint64_t)));
xfs: introduce xlog_copy_iovec Add a helper to abstract out filling the log iovecs in the log item format handlers. This will allow us to change the way we do the log item formatting more easily. The copy in the name is a bit confusing for now as it just assigns a pointer and lets the CIL code perform the copy, but that will change soon. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2013-12-13 04:00:43 +04:00
xfs: format log items write directly into the linear CIL buffer Instead of setting up pointers to memory locations in iop_format which then get copied into the CIL linear buffer after return move the copy into the individual inode items. This avoids the need to always have a memory block in the exact same layout that gets written into the log around, and allow the log items to be much more flexible in their in-memory layouts. The only caveat is that we need to properly align the data for each iovec so that don't have structures misaligned in subsequent iovecs. Note that all log item format routines now need to be careful to modify the copy of the item that was placed into the CIL after calls to xlog_copy_iovec instead of the in-memory copy. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2013-12-13 04:34:02 +04:00
*vecp = vec;
xfs: introduce xlog_copy_iovec Add a helper to abstract out filling the log iovecs in the log item format handlers. This will allow us to change the way we do the log item formatting more easily. The copy in the name is a bit confusing for now as it just assigns a pointer and lets the CIL code perform the copy, but that will change soon. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2013-12-13 04:00:43 +04:00
return vec->i_addr;
}
xfs: log vector rounding leaks log space The addition of direct formatting of log items into the CIL linear buffer added alignment restrictions that the start of each vector needed to be 64 bit aligned. Hence padding was added in xlog_finish_iovec() to round up the vector length to ensure the next vector started with the correct alignment. This adds a small number of bytes to the size of the linear buffer that is otherwise unused. The issue is that we then use the linear buffer size to determine the log space used by the log item, and this includes the unused space. Hence when we account for space used by the log item, it's more than is actually written into the iclogs, and hence we slowly leak this space. This results on log hangs when reserving space, with threads getting stuck with these stack traces: Call Trace: [<ffffffff81d15989>] schedule+0x29/0x70 [<ffffffff8150d3a2>] xlog_grant_head_wait+0xa2/0x1a0 [<ffffffff8150d55d>] xlog_grant_head_check+0xbd/0x140 [<ffffffff8150ee33>] xfs_log_reserve+0x103/0x220 [<ffffffff814b7f05>] xfs_trans_reserve+0x2f5/0x310 ..... The 4 bytes is significant. Brain Foster did all the hard work in tracking down a reproducable leak to inode chunk allocation (it went away with the ikeep mount option). His rough numbers were that creating 50,000 inodes leaked 11 log blocks. This turns out to be roughly 800 inode chunks or 1600 inode cluster buffers. That works out at roughly 4 bytes per cluster buffer logged, and at that I started looking for a 4 byte leak in the buffer logging code. What I found was that a struct xfs_buf_log_format structure for an inode cluster buffer is 28 bytes in length. This gets rounded up to 32 bytes, but the vector length remains 28 bytes. Hence the CIL ticket reservation is decremented by 32 bytes (via lv->lv_buf_len) for that vector rather than 28 bytes which are written into the log. The fix for this problem is to separately track the bytes used by the log vectors in the item and use that instead of the buffer length when accounting for the log space that will be used by the formatted log item. Again, thanks to Brian Foster for doing all the hard work and long hours to isolate this leak and make finding the bug relatively simple. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-05-20 02:18:09 +04:00
/*
* We need to make sure the next buffer is naturally aligned for the biggest
* basic data type we put into it. We already accounted for this padding when
* sizing the buffer.
*
* However, this padding does not get written into the log, and hence we have to
* track the space used by the log vectors separately to prevent log space hangs
* due to inaccurate accounting (i.e. a leak) of the used log space through the
* CIL context ticket.
*/
xfs: format log items write directly into the linear CIL buffer Instead of setting up pointers to memory locations in iop_format which then get copied into the CIL linear buffer after return move the copy into the individual inode items. This avoids the need to always have a memory block in the exact same layout that gets written into the log around, and allow the log items to be much more flexible in their in-memory layouts. The only caveat is that we need to properly align the data for each iovec so that don't have structures misaligned in subsequent iovecs. Note that all log item format routines now need to be careful to modify the copy of the item that was placed into the CIL after calls to xlog_copy_iovec instead of the in-memory copy. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2013-12-13 04:34:02 +04:00
static inline void
xlog_finish_iovec(struct xfs_log_vec *lv, struct xfs_log_iovec *vec, int len)
{
lv->lv_buf_len += round_up(len, sizeof(uint64_t));
xfs: log vector rounding leaks log space The addition of direct formatting of log items into the CIL linear buffer added alignment restrictions that the start of each vector needed to be 64 bit aligned. Hence padding was added in xlog_finish_iovec() to round up the vector length to ensure the next vector started with the correct alignment. This adds a small number of bytes to the size of the linear buffer that is otherwise unused. The issue is that we then use the linear buffer size to determine the log space used by the log item, and this includes the unused space. Hence when we account for space used by the log item, it's more than is actually written into the iclogs, and hence we slowly leak this space. This results on log hangs when reserving space, with threads getting stuck with these stack traces: Call Trace: [<ffffffff81d15989>] schedule+0x29/0x70 [<ffffffff8150d3a2>] xlog_grant_head_wait+0xa2/0x1a0 [<ffffffff8150d55d>] xlog_grant_head_check+0xbd/0x140 [<ffffffff8150ee33>] xfs_log_reserve+0x103/0x220 [<ffffffff814b7f05>] xfs_trans_reserve+0x2f5/0x310 ..... The 4 bytes is significant. Brain Foster did all the hard work in tracking down a reproducable leak to inode chunk allocation (it went away with the ikeep mount option). His rough numbers were that creating 50,000 inodes leaked 11 log blocks. This turns out to be roughly 800 inode chunks or 1600 inode cluster buffers. That works out at roughly 4 bytes per cluster buffer logged, and at that I started looking for a 4 byte leak in the buffer logging code. What I found was that a struct xfs_buf_log_format structure for an inode cluster buffer is 28 bytes in length. This gets rounded up to 32 bytes, but the vector length remains 28 bytes. Hence the CIL ticket reservation is decremented by 32 bytes (via lv->lv_buf_len) for that vector rather than 28 bytes which are written into the log. The fix for this problem is to separately track the bytes used by the log vectors in the item and use that instead of the buffer length when accounting for the log space that will be used by the formatted log item. Again, thanks to Brian Foster for doing all the hard work and long hours to isolate this leak and make finding the bug relatively simple. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-05-20 02:18:09 +04:00
lv->lv_bytes += len;
xfs: format log items write directly into the linear CIL buffer Instead of setting up pointers to memory locations in iop_format which then get copied into the CIL linear buffer after return move the copy into the individual inode items. This avoids the need to always have a memory block in the exact same layout that gets written into the log around, and allow the log items to be much more flexible in their in-memory layouts. The only caveat is that we need to properly align the data for each iovec so that don't have structures misaligned in subsequent iovecs. Note that all log item format routines now need to be careful to modify the copy of the item that was placed into the CIL after calls to xlog_copy_iovec instead of the in-memory copy. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2013-12-13 04:34:02 +04:00
vec->i_len = len;
}
static inline void *
xlog_copy_iovec(struct xfs_log_vec *lv, struct xfs_log_iovec **vecp,
uint type, void *data, int len)
{
void *buf;
buf = xlog_prepare_iovec(lv, vecp, type);
memcpy(buf, data, len);
xlog_finish_iovec(lv, *vecp, len);
return buf;
}
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/*
[XFS] We really suck at spulling. Thanks to Chris Pascoe for fixing all these typos. SGI-PV: 904196 SGI-Modid: xfs-linux-melb:xfs-kern:25539a Signed-off-by: Nathan Scott <nathans@sgi.com>
2006-03-29 02:55:14 +04:00
* By comparing each component, we don't have to worry about extra
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
* endian issues in treating two 32 bit numbers as one 64 bit number
*/
[PATCH] remove gcc-2 checks Remove various things which were checking for gcc-1.x and gcc-2.x compilers. From: Adrian Bunk <bunk@stusta.de> Some documentation updates and removes some code paths for gcc < 3.2. Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08 12:04:09 +03:00
static inline xfs_lsn_t _lsn_cmp(xfs_lsn_t lsn1, xfs_lsn_t lsn2)
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
{
if (CYCLE_LSN(lsn1) != CYCLE_LSN(lsn2))
return (CYCLE_LSN(lsn1)<CYCLE_LSN(lsn2))? -999 : 999;
if (BLOCK_LSN(lsn1) != BLOCK_LSN(lsn2))
return (BLOCK_LSN(lsn1)<BLOCK_LSN(lsn2))? -999 : 999;
return 0;
}
#define XFS_LSN_CMP(x,y) _lsn_cmp(x,y)
/*
* Flags to xfs_log_force()
*
* XFS_LOG_SYNC: Synchronous force in-core log to disk
*/
#define XFS_LOG_SYNC 0x1
/* Log manager interfaces */
struct xfs_mount;
xfs: stop passing opaque handles to xfs_log.c routines Currenly we pass opaque xfs_log_ticket_t handles instead of struct xlog_ticket pointers, and void pointers instead of struct xlog_in_core pointers to various log manager functions. Instead pass properly typed pointers after adding forward declarations for them to xfs_log.h, and adjust the touched function prototypes to the standard XFS style while at it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-02-16 02:34:54 +03:00
struct xlog_in_core;
[XFS] Fix double free of log tickets When an I/O error occurs during an intermediate commit on a rolling transaction, xfs_trans_commit() will free the transaction structure and the related ticket. However, the duplicate transaction that gets used as the transaction continues still contains a pointer to the ticket. Hence when the duplicate transaction is cancelled and freed, we free the ticket a second time. Add reference counting to the ticket so that we hold an extra reference to the ticket over the transaction commit. We drop the extra reference once we have checked that the transaction commit did not return an error, thus avoiding a double free on commit error. Credit to Nick Piggin for tripping over the problem. SGI-PV: 989741 Signed-off-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-11-17 09:37:10 +03:00
struct xlog_ticket;
xfs: factor log item initialisation Each log item type does manual initialisation of the log item. Delayed logging introduces new fields that need initialisation, so factor all the open coded initialisation into a common function first. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2010-03-23 02:10:00 +03:00
struct xfs_log_item;
struct xfs_item_ops;
xfs: make the log ticket ID available outside the log infrastructure The ticket ID is needed to uniquely identify transactions when doing busy extent matching. Delayed logging changes the lifecycle of busy extents with respect to the transaction structure lifecycle. Hence we can no longer use the transaction structure as a means of determining the owner of the busy extent as it may be freed and reused while the busy extent is still active. This commit provides the infrastructure to access the xlog_tid_t held in the ticket from a transaction handle. This avoids the need for callers to peek into the transaction and log structures to find this out. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-05-14 15:41:46 +04:00
struct xfs_trans;
xfs: stop passing opaque handles to xfs_log.c routines Currenly we pass opaque xfs_log_ticket_t handles instead of struct xlog_ticket pointers, and void pointers instead of struct xlog_in_core pointers to various log manager functions. Instead pass properly typed pointers after adding forward declarations for them to xfs_log.h, and adjust the touched function prototypes to the standard XFS style while at it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-02-16 02:34:54 +03:00
xfs: merge _xfs_log_force and xfs_log_force Switch to a single interface for flushing the whole log, which gives consistent trace point coverage, and removes the unused log_flushed argument for the previous _xfs_log_force callers. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-14 09:15:28 +03:00
int xfs_log_force(struct xfs_mount *mp, uint flags);
xfs: merge _xfs_log_force_lsn and xfs_log_force_lsn Switch to a single interface for flushing the log to a specific LSN, which gives consistent trace point coverage and a less confusing interface. The was only a single user of the previous xfs_log_force_lsn function, which now also passes a NULL log_flushed argument. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-14 09:15:28 +03:00
int xfs_log_force_lsn(struct xfs_mount *mp, xfs_lsn_t lsn, uint flags,
int *log_forced);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
int xfs_log_mount(struct xfs_mount *mp,
struct xfs_buftarg *log_target,
xfs_daddr_t start_block,
int num_bblocks);
[XFS] cleanup xfs_mountfs Remove all the useless flags and code keyed off it in xfs_mountfs. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31831a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13 10:49:32 +04:00
int xfs_log_mount_finish(struct xfs_mount *mp);
fs: xfs: xfs_log: Change return type from int to void Change return types of below functions as they never fails xfs_log_mount_cancel xlog_recover_cancel xlog_recover_cancel_intents fix below issue reported by coccicheck fs/xfs/xfs_log_recover.c:4886:7-12: Unneeded variable: "error". Return "0" on line 4926 Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-07-03 17:34:18 +03:00
void xfs_log_mount_cancel(struct xfs_mount *);
xfs: split tail_lsn assignments from log space wakeups Currently xfs_log_move_tail has a tail_lsn argument that is horribly overloaded: it may contain either an actual lsn to assign to the log tail, 0 as a special case to use the last sync LSN, or 1 to indicate that no tail LSN assignment should be performed, and we should opportunisticly wake up at one task waiting for log space even if we did not move the LSN. Remove the tail lsn assigned from xfs_log_move_tail and make the two callers use xlog_assign_tail_lsn instead of the current variant of partially using the code in xfs_log_move_tail and partially opencoding it. Note that means we grow an addition lock roundtrip on the AIL lock for each bulk update or delete, which is still far less than what we had before introducing the bulk operations. If this proves to be a problem we can still add a variant of xlog_assign_tail_lsn that expects the lock to be held already. Also rename the remainder of xfs_log_move_tail to xfs_log_space_wake as that name describes its functionality much better. Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-02-20 06:31:20 +04:00
xfs_lsn_t xlog_assign_tail_lsn(struct xfs_mount *mp);
xfs: allow assigning the tail lsn with the AIL lock held Provide a variant of xlog_assign_tail_lsn that has the AIL lock already held. By doing so we do an additional atomic_read + atomic_set under the lock, which comes down to two instructions. Switch xfs_trans_ail_update_bulk and xfs_trans_ail_delete_bulk to the new version to reduce the number of lock roundtrips, and prepare for a new addition that would require a third lock roundtrip in xfs_trans_ail_delete_bulk. This addition is also the reason for slightly rearranging the conditionals and relying on xfs_log_space_wake for checking that the filesystem has been shut down internally. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-04-23 09:58:33 +04:00
xfs_lsn_t xlog_assign_tail_lsn_locked(struct xfs_mount *mp);
xfs: cleanup xfs_log_space_wake Remove the now unused opportunistic parameter, and use the the xlog_writeq_wake and xlog_reserveq_wake helpers now that we don't have to care about the opportunistic wakeups. Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-02-20 06:31:23 +04:00
void xfs_log_space_wake(struct xfs_mount *mp);
xfs: simplify the xfs_log_release_iclog calling convention The only caller of xfs_log_release_iclog doesn't care about the return value, so remove it. Also don't bother passing the mount pointer, given that we can trivially derive it from the iclog. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-03-20 18:49:19 +03:00
void xfs_log_release_iclog(struct xlog_in_core *iclog);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
int xfs_log_reserve(struct xfs_mount *mp,
int length,
int count,
xfs: stop passing opaque handles to xfs_log.c routines Currenly we pass opaque xfs_log_ticket_t handles instead of struct xlog_ticket pointers, and void pointers instead of struct xlog_in_core pointers to various log manager functions. Instead pass properly typed pointers after adding forward declarations for them to xfs_log.h, and adjust the touched function prototypes to the standard XFS style while at it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-02-16 02:34:54 +03:00
struct xlog_ticket **ticket,
xfs: remove double-underscore integer types This is a purely mechanical patch that removes the private __{u,}int{8,16,32,64}_t typedefs in favor of using the system {u,}int{8,16,32,64}_t typedefs. This is the sed script used to perform the transformation and fix the resulting whitespace and indentation errors: s/typedef\t__uint8_t/typedef __uint8_t\t/g s/typedef\t__uint/typedef __uint/g s/typedef\t__int\([0-9]*\)_t/typedef int\1_t\t/g s/__uint8_t\t/__uint8_t\t\t/g s/__uint/uint/g s/__int\([0-9]*\)_t\t/__int\1_t\t\t/g s/__int/int/g /^typedef.*int[0-9]*_t;$/d Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2017-06-16 21:00:05 +03:00
uint8_t clientid,
xfs: remove transaction types These aren't used for CIL-style logging and can be dropped. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2016-04-06 02:20:36 +03:00
bool permanent);
xfs: split and cleanup xfs_log_reserve Split the log regrant case out of xfs_log_reserve into a separate function, and merge xlog_grant_log_space and xlog_regrant_write_log_space into their respective callers. Also replace the XFS_LOG_PERM_RESERV flag, which easily got misused before the previous cleanups with a simple boolean parameter. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-02-20 06:31:31 +04:00
int xfs_log_regrant(struct xfs_mount *mp, struct xlog_ticket *tic);
xfs: cleanup log unmount handling Kill the current xfs_log_unmount wrapper and opencode the two function calls in the only caller. Rename the current xfs_log_unmount_dealloc to xfs_log_unmount as it undoes xfs_log_mount and the new name makes that more clear. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com>
2009-03-16 10:19:29 +03:00
void xfs_log_unmount(struct xfs_mount *mp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
int xfs_log_force_umount(struct xfs_mount *mp, int logerror);
xfs: sync lazy sb accounting on quiesce of read-only mounts xfs_log_sbcount() syncs the superblock specifically to accumulate the in-core percpu superblock counters and commit them to disk. This is required to maintain filesystem consistency across quiesce (freeze, read-only mount/remount) or unmount when lazy superblock accounting is enabled because individual transactions do not update the superblock directly. This mechanism works as expected for writable mounts, but xfs_log_sbcount() skips the update for read-only mounts. Read-only mounts otherwise still allow log recovery and write out an unmount record during log quiesce. If a read-only mount performs log recovery, it can modify the in-core superblock counters and write an unmount record when the filesystem unmounts without ever syncing the in-core counters. This leaves the filesystem with a clean log but in an inconsistent state with regard to lazy sb counters. Update xfs_log_sbcount() to use the same logic xfs_log_unmount_write() uses to determine when to write an unmount record. This ensures that lazy accounting is always synced before the log is cleaned. Refactor this logic into a new helper to distinguish between a writable filesystem and a writable log. Specifically, the log is writable unless the filesystem is mounted with the norecovery mount option, the underlying log device is read-only, or the filesystem is shutdown. Drop the freeze state check because the update is already allowed during the freezing process and no context calls this function on an already frozen fs. Also, retain the shutdown check in xfs_log_unmount_write() to catch the case where the preceding log force might have triggered a shutdown. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Gao Xiang <hsiangkao@redhat.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Bill O'Donnell <billodo@redhat.com> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-01-23 03:48:20 +03:00
bool xfs_log_writable(struct xfs_mount *mp);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
xfs: Introduce delayed logging core code The delayed logging code only changes in-memory structures and as such can be enabled and disabled with a mount option. Add the mount option and emit a warning that this is an experimental feature that should not be used in production yet. We also need infrastructure to track committed items that have not yet been written to the log. This is what the Committed Item List (CIL) is for. The log item also needs to be extended to track the current log vector, the associated memory buffer and it's location in the Commit Item List. Extend the log item and log vector structures to enable this tracking. To maintain the current log format for transactions with delayed logging, we need to introduce a checkpoint transaction and a context for tracking each checkpoint from initiation to transaction completion. This includes adding a log ticket for tracking space log required/used by the context checkpoint. To track all the changes we need an io vector array per log item, rather than a single array for the entire transaction. Using the new log vector structure for this requires two passes - the first to allocate the log vector structures and chain them together, and the second to fill them out. This log vector chain can then be passed to the CIL for formatting, pinning and insertion into the CIL. Formatting of the log vector chain is relatively simple - it's just a loop over the iovecs on each log vector, but it is made slightly more complex because we re-write the iovec after the copy to point back at the memory buffer we just copied into. This code also needs to pin log items. If the log item is not already tracked in this checkpoint context, then it needs to be pinned. Otherwise it is already pinned and we don't need to pin it again. The only other complexity is calculating the amount of new log space the formatting has consumed. This needs to be accounted to the transaction in progress, and the accounting is made more complex becase we need also to steal space from it for log metadata in the checkpoint transaction. Calculate all this at insert time and update all the tickets, counters, etc correctly. Once we've formatted all the log items in the transaction, attach the busy extents to the checkpoint context so the busy extents live until checkpoint completion and can be processed at that point in time. Transactions can then be freed at this point in time. Now we need to issue checkpoints - we are tracking the amount of log space used by the items in the CIL, so we can trigger background checkpoints when the space usage gets to a certain threshold. Otherwise, checkpoints need ot be triggered when a log synchronisation point is reached - a log force event. Because the log write code already handles chained log vectors, writing the transaction is trivial, too. Construct a transaction header, add it to the head of the chain and write it into the log, then issue a commit record write. Then we can release the checkpoint log ticket and attach the context to the log buffer so it can be called during Io completion to complete the checkpoint. We also need to allow for synchronising multiple in-flight checkpoints. This is needed for two things - the first is to ensure that checkpoint commit records appear in the log in the correct sequence order (so they are replayed in the correct order). The second is so that xfs_log_force_lsn() operates correctly and only flushes and/or waits for the specific sequence it was provided with. To do this we need a wait variable and a list tracking the checkpoint commits in progress. We can walk this list and wait for the checkpoints to change state or complete easily, an this provides the necessary synchronisation for correct operation in both cases. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-05-21 08:37:18 +04:00
struct xlog_ticket *xfs_log_ticket_get(struct xlog_ticket *ticket);
[XFS] Fix double free of log tickets When an I/O error occurs during an intermediate commit on a rolling transaction, xfs_trans_commit() will free the transaction structure and the related ticket. However, the duplicate transaction that gets used as the transaction continues still contains a pointer to the ticket. Hence when the duplicate transaction is cancelled and freed, we free the ticket a second time. Add reference counting to the ticket so that we hold an extra reference to the ticket over the transaction commit. We drop the extra reference once we have checked that the transaction commit did not return an error, thus avoiding a double free on commit error. Credit to Nick Piggin for tripping over the problem. SGI-PV: 989741 Signed-off-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-11-17 09:37:10 +03:00
void xfs_log_ticket_put(struct xlog_ticket *ticket);
xfs: convert xfs_log_commit_cil() to void Convert xfs_log_commit_cil() to a void function since it return nothing but 0 in any case, after that we can simplify the relative code logic in xfs_trans_commit() accordingly. Signed-off-by: Jie Liu <jeff.liu@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2014-02-07 08:26:07 +04:00
void xfs_log_commit_cil(struct xfs_mount *mp, struct xfs_trans *tp,
xfs: saner xfs_trans_commit interface The flags argument to xfs_trans_commit is not useful for most callers, as a commit of a transaction without a permanent log reservation must pass 0 here, and all callers for a transaction with a permanent log reservation except for xfs_trans_roll must pass XFS_TRANS_RELEASE_LOG_RES. So remove the flags argument from the public xfs_trans_commit interfaces, and introduce low-level __xfs_trans_commit variant just for xfs_trans_roll that regrants a log reservation instead of releasing it. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-06-04 06:48:08 +03:00
xfs_lsn_t *commit_lsn, bool regrant);
xfs: remove the aborted parameter to xlog_state_done_syncing We can just check for a shut down log all the way down in xlog_cil_committed instead of passing the parameter. This means a slight behavior change in that we now also abort log items if the shutdown came in halfway into the I/O completion processing, which actually is the right thing to do. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2020-03-20 18:49:20 +03:00
void xlog_cil_process_committed(struct list_head *list);
xfs: Ensure inode allocation buffers are fully replayed With delayed logging, we can get inode allocation buffers in the same transaction inode unlink buffers. We don't currently mark inode allocation buffers in the log, so inode unlink buffers take precedence over allocation buffers. The result is that when they are combined into the same checkpoint, only the unlinked inode chain fields are replayed, resulting in uninitialised inode buffers being detected when the next inode modification is replayed. To fix this, we need to ensure that we do not set the inode buffer flag in the buffer log item format flags if the inode allocation has not already hit the log. To avoid requiring a change to log recovery, we really need to make this a modification that relies only on in-memory sate. We can do this by checking during buffer log formatting (while the CIL cannot be flushed) if we are still in the same sequence when we commit the unlink transaction as the inode allocation transaction. If we are, then we do not add the inode buffer flag to the buffer log format item flags. This means the entire buffer will be replayed, not just the unlinked fields. We do this while CIL flusheѕ are locked out to ensure that we don't race with the sequence numbers changing and hence fail to put the inode buffer flag in the buffer format flags when we really need to. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-05-20 17:19:42 +04:00
bool xfs_log_item_in_current_chkpt(struct xfs_log_item *lip);
xfs: Introduce delayed logging core code The delayed logging code only changes in-memory structures and as such can be enabled and disabled with a mount option. Add the mount option and emit a warning that this is an experimental feature that should not be used in production yet. We also need infrastructure to track committed items that have not yet been written to the log. This is what the Committed Item List (CIL) is for. The log item also needs to be extended to track the current log vector, the associated memory buffer and it's location in the Commit Item List. Extend the log item and log vector structures to enable this tracking. To maintain the current log format for transactions with delayed logging, we need to introduce a checkpoint transaction and a context for tracking each checkpoint from initiation to transaction completion. This includes adding a log ticket for tracking space log required/used by the context checkpoint. To track all the changes we need an io vector array per log item, rather than a single array for the entire transaction. Using the new log vector structure for this requires two passes - the first to allocate the log vector structures and chain them together, and the second to fill them out. This log vector chain can then be passed to the CIL for formatting, pinning and insertion into the CIL. Formatting of the log vector chain is relatively simple - it's just a loop over the iovecs on each log vector, but it is made slightly more complex because we re-write the iovec after the copy to point back at the memory buffer we just copied into. This code also needs to pin log items. If the log item is not already tracked in this checkpoint context, then it needs to be pinned. Otherwise it is already pinned and we don't need to pin it again. The only other complexity is calculating the amount of new log space the formatting has consumed. This needs to be accounted to the transaction in progress, and the accounting is made more complex becase we need also to steal space from it for log metadata in the checkpoint transaction. Calculate all this at insert time and update all the tickets, counters, etc correctly. Once we've formatted all the log items in the transaction, attach the busy extents to the checkpoint context so the busy extents live until checkpoint completion and can be processed at that point in time. Transactions can then be freed at this point in time. Now we need to issue checkpoints - we are tracking the amount of log space used by the items in the CIL, so we can trigger background checkpoints when the space usage gets to a certain threshold. Otherwise, checkpoints need ot be triggered when a log synchronisation point is reached - a log force event. Because the log write code already handles chained log vectors, writing the transaction is trivial, too. Construct a transaction header, add it to the head of the chain and write it into the log, then issue a commit record write. Then we can release the checkpoint log ticket and attach the context to the log buffer so it can be called during Io completion to complete the checkpoint. We also need to allow for synchronising multiple in-flight checkpoints. This is needed for two things - the first is to ensure that checkpoint commit records appear in the log in the correct sequence order (so they are replayed in the correct order). The second is so that xfs_log_force_lsn() operates correctly and only flushes and/or waits for the specific sequence it was provided with. To do this we need a wait variable and a list tracking the checkpoint commits in progress. We can walk this list and wait for the checkpoints to change state or complete easily, an this provides the necessary synchronisation for correct operation in both cases. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2010-05-21 08:37:18 +04:00
xfs: sync work is now only periodic log work The only thing the periodic sync work does now is flush the AIL and idle the log. These are really functions of the log code, so move the work to xfs_log.c and rename it appropriately. The only wart that this leaves behind is the xfssyncd_centisecs sysctl, otherwise the xfssyncd is dead. Clean up any comments that related to xfssyncd to reflect it's passing. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-08 14:56:02 +04:00
void xfs_log_work_queue(struct xfs_mount *mp);
xfs: cover the log during log quiesce The log quiesce mechanism historically terminates by marking the log clean with an unmount record. The primary objective is to indicate that log recovery is no longer required after the quiesce has flushed all in-core changes and written back filesystem metadata. While this is perfectly fine, it is somewhat hacky as currently used in certain contexts. For example, filesystem freeze quiesces (i.e. cleans) the log and immediately redirties it with a dummy superblock transaction to ensure that log recovery runs in the event of a crash. While this functions correctly, cleaning the log from freeze context is clearly superfluous given the current redirtying behavior. Instead, the desired behavior can be achieved by simply covering the log. This effectively retires all on-disk log items from the active range of the log by issuing two synchronous and sequential dummy superblock update transactions that serve to update the on-disk log head and tail. The subtle difference is that the log technically remains dirty due to the lack of an unmount record, though recovery is effectively a no-op due to the content of the checkpoints being clean (i.e. the unmodified on-disk superblock). Log covering currently runs in the background and only triggers once the filesystem and log has idled. The purpose of the background mechanism is to prevent log recovery from replaying the most recently logged items long after those items may have been written back. In the quiesce path, the log has been deliberately idled by forcing the log and pushing the AIL until empty in a context where no further mutable filesystem operations are allowed. Therefore, we can cover the log as the final step in the log quiesce codepath to reflect that all previously active items have been successfully written back. This facilitates selective log covering from certain contexts (i.e. freeze) that only seek to quiesce, but not necessarily clean the log. Note that as a side effect of this change, log covering now occurs when cleaning the log as well. This is harmless, facilitates subsequent cleanups, and is mostly temporary as various operations switch to use explicit log covering. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org> Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
2021-01-23 03:48:22 +03:00
int xfs_log_quiesce(struct xfs_mount *mp);
xfs: separate log cleaning from log quiesce Log quiesce is currently associated with cleaning the log, which is accomplished by writing an unmount record as the last step of the quiesce sequence. The quiesce codepath is a bit convoluted in this regard due to how it is reused from various contexts. In preparation to create separate log cleaning and log covering interfaces, lift the write of the unmount record into a new cleaning helper and call that wherever xfs_log_quiesce() is currently invoked. No functional changes. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Allison Henderson <allison.henderson@oracle.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Darrick J. Wong <djwong@kernel.org> Signed-off-by: Darrick J. Wong <djwong@kernel.org>
2021-01-23 03:48:21 +03:00
void xfs_log_clean(struct xfs_mount *mp);
xfs: validate metadata LSNs against log on v5 superblocks Since the onset of v5 superblocks, the LSN of the last modification has been included in a variety of on-disk data structures. This LSN is used to provide log recovery ordering guarantees (e.g., to ensure an older log recovery item is not replayed over a newer target data structure). While this works correctly from the point a filesystem is formatted and mounted, userspace tools have some problematic behaviors that defeat this mechanism. For example, xfs_repair historically zeroes out the log unconditionally (regardless of whether corruption is detected). If this occurs, the LSN of the filesystem is reset and the log is now in a problematic state with respect to on-disk metadata structures that might have a larger LSN. Until either the log catches up to the highest previously used metadata LSN or each affected data structure is modified and written out without incident (which resets the metadata LSN), log recovery is susceptible to filesystem corruption. This problem is ultimately addressed and repaired in the associated userspace tools. The kernel is still responsible to detect the problem and notify the user that something is wrong. Check the superblock LSN at mount time and fail the mount if it is invalid. From that point on, trigger verifier failure on any metadata I/O where an invalid LSN is detected. This results in a filesystem shutdown and guarantees that we do not log metadata changes with invalid LSNs on disk. Since this is a known issue with a known recovery path, present a warning to instruct the user how to recover. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-10-12 07:59:25 +03:00
bool xfs_log_check_lsn(struct xfs_mount *, xfs_lsn_t);
xfs: refactor log recovery check Add a predicate to decide if the log is actively in recovery and use that instead of open-coding a pagf_init check in the attr leaf verifier. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2018-08-01 17:40:48 +03:00
bool xfs_log_in_recovery(struct xfs_mount *);
xfs: sync work is now only periodic log work The only thing the periodic sync work does now is flush the AIL and idle the log. These are really functions of the log code, so move the work to xfs_log.c and rename it appropriately. The only wart that this leaves behind is the xfssyncd_centisecs sysctl, otherwise the xfssyncd is dead. Clean up any comments that related to xfssyncd to reflect it's passing. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Ben Myers <bpm@sgi.com>
2012-10-08 14:56:02 +04:00
xfs: expose the log push threshold Separate the computation of the log push threshold and the push logic in xlog_grant_push_ail. This enables higher level code to determine (for example) that it is holding on to a logged intent item and the log is so busy that it is more than 75% full. In that case, it would be desirable to move the log item towards the head to release the tail, which we will cover in the next patch. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Brian Foster <bfoster@redhat.com>
2020-09-26 03:39:51 +03:00
xfs_lsn_t xlog_grant_push_threshold(struct xlog *log, int need_bytes);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#endif /* __XFS_LOG_H__ */