WSL2-Linux-Kernel/arch/powerpc/xmon/xmon.c

3509 строки
74 KiB
C
Исходник Обычный вид История

/*
* Routines providing a simple monitor for use on the PowerMac.
*
* Copyright (C) 1996-2005 Paul Mackerras.
* Copyright (C) 2001 PPC64 Team, IBM Corp
* Copyrignt (C) 2006 Michael Ellerman, IBM Corp
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/smp.h>
#include <linux/mm.h>
#include <linux/reboot.h>
#include <linux/delay.h>
#include <linux/kallsyms.h>
#include <linux/kmsg_dump.h>
#include <linux/cpumask.h>
#include <linux/export.h>
#include <linux/sysrq.h>
#include <linux/interrupt.h>
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 17:55:46 +04:00
#include <linux/irq.h>
#include <linux/bug.h>
#include <linux/nmi.h>
#include <linux/ctype.h>
#include <asm/ptrace.h>
#include <asm/string.h>
#include <asm/prom.h>
#include <asm/machdep.h>
#include <asm/xmon.h>
#include <asm/processor.h>
#include <asm/pgtable.h>
#include <asm/mmu.h>
#include <asm/mmu_context.h>
#include <asm/cputable.h>
#include <asm/rtas.h>
#include <asm/sstep.h>
#include <asm/irq_regs.h>
#include <asm/spu.h>
#include <asm/spu_priv1.h>
#include <asm/setjmp.h>
#include <asm/reg.h>
#include <asm/debug.h>
#include <asm/hw_breakpoint.h>
#include <asm/opal.h>
#include <asm/firmware.h>
#ifdef CONFIG_PPC64
#include <asm/hvcall.h>
#include <asm/paca.h>
#endif
#if defined(CONFIG_PPC_SPLPAR)
#include <asm/plpar_wrappers.h>
#else
static inline long plapr_set_ciabr(unsigned long ciabr) {return 0; };
#endif
#include "nonstdio.h"
#include "dis-asm.h"
#ifdef CONFIG_SMP
static cpumask_t cpus_in_xmon = CPU_MASK_NONE;
static unsigned long xmon_taken = 1;
static int xmon_owner;
static int xmon_gate;
powerpc: Add an xmon command to dump one or all pacas This was originally motivated by a desire to see the mapping between logical and hardware cpu numbers. But it seemed that it made more sense to just add a command to dump (most of) the paca. With no arguments "dp" will dump the paca for the current cpu. It also takes an argument, eg. "dp 3" which is the logical cpu number in hex. This form does not check if the cpu is possible, but displays the paca regardless, as well as the cpu's state in the possible, present and online masks. Thirdly, "dpa" will display the paca for all possible cpus. If there are no possible cpus, like early in boot, it will tell you that. Sample output, number in brackets is the offset into the struct: 2:mon> dp 3 paca for cpu 0x3 @ c00000000ff20a80: possible = yes present = yes online = yes lock_token = 0x8000 (0x8) paca_index = 0x3 (0xa) kernel_toc = 0xc00000000144f990 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001032 (0x20) stab_real = 0x0 (0x28) stab_addr = 0x0 (0x30) emergency_sp = 0xc00000003ffe4000 (0x38) data_offset = 0xa40000 (0x40) hw_cpu_id = 0x9 (0x50) cpu_start = 0x1 (0x52) kexec_state = 0x0 (0x53) __current = 0xc00000007e568680 (0x218) kstack = 0xc00000007e5a3e30 (0x220) stab_rr = 0x1a (0x228) saved_r1 = 0xc00000007e7cb450 (0x230) trap_save = 0x0 (0x240) soft_enabled = 0x0 (0x242) irq_happened = 0x0 (0x243) io_sync = 0x0 (0x244) irq_work_pending = 0x0 (0x245) nap_state_lost = 0x0 (0x246) Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-14 03:01:31 +04:00
#else
#define xmon_owner 0
#endif /* CONFIG_SMP */
static unsigned long in_xmon __read_mostly = 0;
static unsigned long adrs;
static int size = 1;
#define MAX_DUMP (128 * 1024)
static unsigned long ndump = 64;
static unsigned long nidump = 16;
static unsigned long ncsum = 4096;
static int termch;
static char tmpstr[128];
static long bus_error_jmp[JMP_BUF_LEN];
static int catch_memory_errors;
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 14:31:24 +03:00
static int catch_spr_faults;
static long *xmon_fault_jmp[NR_CPUS];
/* Breakpoint stuff */
struct bpt {
unsigned long address;
unsigned int instr[2];
atomic_t ref_count;
int enabled;
unsigned long pad;
};
/* Bits in bpt.enabled */
#define BP_CIABR 1
#define BP_TRAP 2
#define BP_DABR 4
#define NBPTS 256
static struct bpt bpts[NBPTS];
static struct bpt dabr;
static struct bpt *iabr;
static unsigned bpinstr = 0x7fe00008; /* trap */
#define BP_NUM(bp) ((bp) - bpts + 1)
/* Prototypes */
static int cmds(struct pt_regs *);
static int mread(unsigned long, void *, int);
static int mwrite(unsigned long, void *, int);
static int handle_fault(struct pt_regs *);
static void byterev(unsigned char *, int);
static void memex(void);
static int bsesc(void);
static void dump(void);
static void prdump(unsigned long, long);
static int ppc_inst_dump(unsigned long, long, int);
static void dump_log_buf(void);
#ifdef CONFIG_PPC_POWERNV
static void dump_opal_msglog(void);
#else
static inline void dump_opal_msglog(void)
{
printf("Machine is not running OPAL firmware.\n");
}
#endif
static void backtrace(struct pt_regs *);
static void excprint(struct pt_regs *);
static void prregs(struct pt_regs *);
static void memops(int);
static void memlocate(void);
static void memzcan(void);
static void memdiffs(unsigned char *, unsigned char *, unsigned, unsigned);
int skipbl(void);
int scanhex(unsigned long *valp);
static void scannl(void);
static int hexdigit(int);
void getstring(char *, int);
static void flush_input(void);
static int inchar(void);
static void take_input(char *);
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 14:31:24 +03:00
static int read_spr(int, unsigned long *);
static void write_spr(int, unsigned long);
static void super_regs(void);
static void remove_bpts(void);
static void insert_bpts(void);
static void remove_cpu_bpts(void);
static void insert_cpu_bpts(void);
static struct bpt *at_breakpoint(unsigned long pc);
static struct bpt *in_breakpoint_table(unsigned long pc, unsigned long *offp);
static int do_step(struct pt_regs *);
static void bpt_cmds(void);
static void cacheflush(void);
static int cpu_cmd(void);
static void csum(void);
static void bootcmds(void);
static void proccall(void);
static void show_tasks(void);
void dump_segments(void);
static void symbol_lookup(void);
static void xmon_show_stack(unsigned long sp, unsigned long lr,
unsigned long pc);
static void xmon_print_symbol(unsigned long address, const char *mid,
const char *after);
static const char *getvecname(unsigned long vec);
static int do_spu_cmd(void);
#ifdef CONFIG_44x
static void dump_tlb_44x(void);
#endif
#ifdef CONFIG_PPC_BOOK3E
static void dump_tlb_book3e(void);
#endif
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 08:27:16 +04:00
static int xmon_no_auto_backtrace;
#ifdef CONFIG_PPC64
#define REG "%.16lx"
#else
#define REG "%.8lx"
#endif
#ifdef __LITTLE_ENDIAN__
#define GETWORD(v) (((v)[3] << 24) + ((v)[2] << 16) + ((v)[1] << 8) + (v)[0])
#else
#define GETWORD(v) (((v)[0] << 24) + ((v)[1] << 16) + ((v)[2] << 8) + (v)[3])
#endif
static char *help_string = "\
Commands:\n\
b show breakpoints\n\
bd set data breakpoint\n\
bi set instruction breakpoint\n\
bc clear breakpoint\n"
#ifdef CONFIG_SMP
"\
c print cpus stopped in xmon\n\
c# try to switch to cpu number h (in hex)\n"
#endif
"\
C checksum\n\
d dump bytes\n\
di dump instructions\n\
df dump float values\n\
dd dump double values\n\
powerpc: Add an xmon command to dump one or all pacas This was originally motivated by a desire to see the mapping between logical and hardware cpu numbers. But it seemed that it made more sense to just add a command to dump (most of) the paca. With no arguments "dp" will dump the paca for the current cpu. It also takes an argument, eg. "dp 3" which is the logical cpu number in hex. This form does not check if the cpu is possible, but displays the paca regardless, as well as the cpu's state in the possible, present and online masks. Thirdly, "dpa" will display the paca for all possible cpus. If there are no possible cpus, like early in boot, it will tell you that. Sample output, number in brackets is the offset into the struct: 2:mon> dp 3 paca for cpu 0x3 @ c00000000ff20a80: possible = yes present = yes online = yes lock_token = 0x8000 (0x8) paca_index = 0x3 (0xa) kernel_toc = 0xc00000000144f990 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001032 (0x20) stab_real = 0x0 (0x28) stab_addr = 0x0 (0x30) emergency_sp = 0xc00000003ffe4000 (0x38) data_offset = 0xa40000 (0x40) hw_cpu_id = 0x9 (0x50) cpu_start = 0x1 (0x52) kexec_state = 0x0 (0x53) __current = 0xc00000007e568680 (0x218) kstack = 0xc00000007e5a3e30 (0x220) stab_rr = 0x1a (0x228) saved_r1 = 0xc00000007e7cb450 (0x230) trap_save = 0x0 (0x240) soft_enabled = 0x0 (0x242) irq_happened = 0x0 (0x243) io_sync = 0x0 (0x244) irq_work_pending = 0x0 (0x245) nap_state_lost = 0x0 (0x246) Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-14 03:01:31 +04:00
dl dump the kernel log buffer\n"
#ifdef CONFIG_PPC_POWERNV
"\
do dump the OPAL message log\n"
#endif
powerpc: Add an xmon command to dump one or all pacas This was originally motivated by a desire to see the mapping between logical and hardware cpu numbers. But it seemed that it made more sense to just add a command to dump (most of) the paca. With no arguments "dp" will dump the paca for the current cpu. It also takes an argument, eg. "dp 3" which is the logical cpu number in hex. This form does not check if the cpu is possible, but displays the paca regardless, as well as the cpu's state in the possible, present and online masks. Thirdly, "dpa" will display the paca for all possible cpus. If there are no possible cpus, like early in boot, it will tell you that. Sample output, number in brackets is the offset into the struct: 2:mon> dp 3 paca for cpu 0x3 @ c00000000ff20a80: possible = yes present = yes online = yes lock_token = 0x8000 (0x8) paca_index = 0x3 (0xa) kernel_toc = 0xc00000000144f990 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001032 (0x20) stab_real = 0x0 (0x28) stab_addr = 0x0 (0x30) emergency_sp = 0xc00000003ffe4000 (0x38) data_offset = 0xa40000 (0x40) hw_cpu_id = 0x9 (0x50) cpu_start = 0x1 (0x52) kexec_state = 0x0 (0x53) __current = 0xc00000007e568680 (0x218) kstack = 0xc00000007e5a3e30 (0x220) stab_rr = 0x1a (0x228) saved_r1 = 0xc00000007e7cb450 (0x230) trap_save = 0x0 (0x240) soft_enabled = 0x0 (0x242) irq_happened = 0x0 (0x243) io_sync = 0x0 (0x244) irq_work_pending = 0x0 (0x245) nap_state_lost = 0x0 (0x246) Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-14 03:01:31 +04:00
#ifdef CONFIG_PPC64
"\
dp[#] dump paca for current cpu, or cpu #\n\
dpa dump paca for all possible cpus\n"
#endif
"\
dr dump stream of raw bytes\n\
e print exception information\n\
f flush cache\n\
la lookup symbol+offset of specified address\n\
ls lookup address of specified symbol\n\
m examine/change memory\n\
mm move a block of memory\n\
ms set a block of memory\n\
md compare two blocks of memory\n\
ml locate a block of memory\n\
mz zero a block of memory\n\
mi show information about memory allocation\n\
p call a procedure\n\
P list processes/tasks\n\
r print registers\n\
s single step\n"
#ifdef CONFIG_SPU_BASE
" ss stop execution on all spus\n\
sr restore execution on stopped spus\n\
sf # dump spu fields for spu # (in hex)\n\
sd # dump spu local store for spu # (in hex)\n\
sdi # disassemble spu local store for spu # (in hex)\n"
#endif
" S print special registers\n\
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 14:31:24 +03:00
Sa print all SPRs\n\
Sr # read SPR #\n\
Sw #v write v to SPR #\n\
t print backtrace\n\
x exit monitor and recover\n\
X exit monitor and don't recover\n"
#if defined(CONFIG_PPC64) && !defined(CONFIG_PPC_BOOK3E)
" u dump segment table or SLB\n"
#elif defined(CONFIG_PPC_STD_MMU_32)
" u dump segment registers\n"
#elif defined(CONFIG_44x) || defined(CONFIG_PPC_BOOK3E)
" u dump TLB\n"
#endif
" ? help\n"
" # n limit output to n lines per page (for dp, dpa, dl)\n"
" zr reboot\n\
zh halt\n"
;
static struct pt_regs *xmon_regs;
static inline void sync(void)
{
asm volatile("sync; isync");
}
static inline void store_inst(void *p)
{
asm volatile ("dcbst 0,%0; sync; icbi 0,%0; isync" : : "r" (p));
}
static inline void cflush(void *p)
{
asm volatile ("dcbf 0,%0; icbi 0,%0" : : "r" (p));
}
static inline void cinval(void *p)
{
asm volatile ("dcbi 0,%0; icbi 0,%0" : : "r" (p));
}
/**
* write_ciabr() - write the CIABR SPR
* @ciabr: The value to write.
*
* This function writes a value to the CIARB register either directly
* through mtspr instruction if the kernel is in HV privilege mode or
* call a hypervisor function to achieve the same in case the kernel
* is in supervisor privilege mode.
*/
static void write_ciabr(unsigned long ciabr)
{
if (!cpu_has_feature(CPU_FTR_ARCH_207S))
return;
if (cpu_has_feature(CPU_FTR_HVMODE)) {
mtspr(SPRN_CIABR, ciabr);
return;
}
plapr_set_ciabr(ciabr);
}
/**
* set_ciabr() - set the CIABR
* @addr: The value to set.
*
* This function sets the correct privilege value into the the HW
* breakpoint address before writing it up in the CIABR register.
*/
static void set_ciabr(unsigned long addr)
{
addr &= ~CIABR_PRIV;
if (cpu_has_feature(CPU_FTR_HVMODE))
addr |= CIABR_PRIV_HYPER;
else
addr |= CIABR_PRIV_SUPER;
write_ciabr(addr);
}
/*
* Disable surveillance (the service processor watchdog function)
* while we are in xmon.
* XXX we should re-enable it when we leave. :)
*/
#define SURVEILLANCE_TOKEN 9000
static inline void disable_surveillance(void)
{
#ifdef CONFIG_PPC_PSERIES
/* Since this can't be a module, args should end up below 4GB. */
static struct rtas_args args;
int token;
/*
* At this point we have got all the cpus we can into
* xmon, so there is hopefully no other cpu calling RTAS
* at the moment, even though we don't take rtas.lock.
* If we did try to take rtas.lock there would be a
* real possibility of deadlock.
*/
token = rtas_token("set-indicator");
if (token == RTAS_UNKNOWN_SERVICE)
return;
rtas_call_unlocked(&args, token, 3, 1, NULL, SURVEILLANCE_TOKEN, 0, 0);
#endif /* CONFIG_PPC_PSERIES */
}
#ifdef CONFIG_SMP
static int xmon_speaker;
static void get_output_lock(void)
{
int me = smp_processor_id() + 0x100;
int last_speaker = 0, prev;
long timeout;
if (xmon_speaker == me)
return;
for (;;) {
last_speaker = cmpxchg(&xmon_speaker, 0, me);
if (last_speaker == 0)
return;
/*
* Wait a full second for the lock, we might be on a slow
* console, but check every 100us.
*/
timeout = 10000;
while (xmon_speaker == last_speaker) {
if (--timeout > 0) {
udelay(100);
continue;
}
/* hostile takeover */
prev = cmpxchg(&xmon_speaker, last_speaker, me);
if (prev == last_speaker)
return;
break;
}
}
}
static void release_output_lock(void)
{
xmon_speaker = 0;
}
int cpus_are_in_xmon(void)
{
return !cpumask_empty(&cpus_in_xmon);
}
#endif
static inline int unrecoverable_excp(struct pt_regs *regs)
{
#if defined(CONFIG_4xx) || defined(CONFIG_PPC_BOOK3E)
/* We have no MSR_RI bit on 4xx or Book3e, so we simply return false */
return 0;
#else
return ((regs->msr & MSR_RI) == 0);
#endif
}
static int xmon_core(struct pt_regs *regs, int fromipi)
{
int cmd = 0;
struct bpt *bp;
long recurse_jmp[JMP_BUF_LEN];
unsigned long offset;
unsigned long flags;
#ifdef CONFIG_SMP
int cpu;
int secondary;
unsigned long timeout;
#endif
local_irq_save(flags);
hard_irq_disable();
bp = in_breakpoint_table(regs->nip, &offset);
if (bp != NULL) {
regs->nip = bp->address + offset;
atomic_dec(&bp->ref_count);
}
remove_cpu_bpts();
#ifdef CONFIG_SMP
cpu = smp_processor_id();
if (cpumask_test_cpu(cpu, &cpus_in_xmon)) {
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 14:31:24 +03:00
/*
* We catch SPR read/write faults here because the 0x700, 0xf60
* etc. handlers don't call debugger_fault_handler().
*/
if (catch_spr_faults)
longjmp(bus_error_jmp, 1);
get_output_lock();
excprint(regs);
printf("cpu 0x%x: Exception %lx %s in xmon, "
"returning to main loop\n",
cpu, regs->trap, getvecname(TRAP(regs)));
release_output_lock();
longjmp(xmon_fault_jmp[cpu], 1);
}
if (setjmp(recurse_jmp) != 0) {
if (!in_xmon || !xmon_gate) {
get_output_lock();
printf("xmon: WARNING: bad recursive fault "
"on cpu 0x%x\n", cpu);
release_output_lock();
goto waiting;
}
secondary = !(xmon_taken && cpu == xmon_owner);
goto cmdloop;
}
xmon_fault_jmp[cpu] = recurse_jmp;
bp = NULL;
if ((regs->msr & (MSR_IR|MSR_PR|MSR_64BIT)) == (MSR_IR|MSR_64BIT))
bp = at_breakpoint(regs->nip);
if (bp || unrecoverable_excp(regs))
fromipi = 0;
if (!fromipi) {
get_output_lock();
excprint(regs);
if (bp) {
printf("cpu 0x%x stopped at breakpoint 0x%lx (",
cpu, BP_NUM(bp));
xmon_print_symbol(regs->nip, " ", ")\n");
}
if (unrecoverable_excp(regs))
printf("WARNING: exception is not recoverable, "
"can't continue\n");
release_output_lock();
}
cpumask_set_cpu(cpu, &cpus_in_xmon);
waiting:
secondary = 1;
while (secondary && !xmon_gate) {
if (in_xmon == 0) {
if (fromipi)
goto leave;
secondary = test_and_set_bit(0, &in_xmon);
}
barrier();
}
if (!secondary && !xmon_gate) {
/* we are the first cpu to come in */
/* interrupt other cpu(s) */
int ncpus = num_online_cpus();
xmon_owner = cpu;
mb();
if (ncpus > 1) {
smp_send_debugger_break();
/* wait for other cpus to come in */
for (timeout = 100000000; timeout != 0; --timeout) {
if (cpumask_weight(&cpus_in_xmon) >= ncpus)
break;
barrier();
}
}
remove_bpts();
disable_surveillance();
/* for breakpoint or single step, print the current instr. */
if (bp || TRAP(regs) == 0xd00)
ppc_inst_dump(regs->nip, 1, 0);
printf("enter ? for help\n");
mb();
xmon_gate = 1;
barrier();
}
cmdloop:
while (in_xmon) {
if (secondary) {
if (cpu == xmon_owner) {
if (!test_and_set_bit(0, &xmon_taken)) {
secondary = 0;
continue;
}
/* missed it */
while (cpu == xmon_owner)
barrier();
}
barrier();
} else {
cmd = cmds(regs);
if (cmd != 0) {
/* exiting xmon */
insert_bpts();
xmon_gate = 0;
wmb();
in_xmon = 0;
break;
}
/* have switched to some other cpu */
secondary = 1;
}
}
leave:
cpumask_clear_cpu(cpu, &cpus_in_xmon);
xmon_fault_jmp[cpu] = NULL;
#else
/* UP is simple... */
if (in_xmon) {
printf("Exception %lx %s in xmon, returning to main loop\n",
regs->trap, getvecname(TRAP(regs)));
longjmp(xmon_fault_jmp[0], 1);
}
if (setjmp(recurse_jmp) == 0) {
xmon_fault_jmp[0] = recurse_jmp;
in_xmon = 1;
excprint(regs);
bp = at_breakpoint(regs->nip);
if (bp) {
printf("Stopped at breakpoint %lx (", BP_NUM(bp));
xmon_print_symbol(regs->nip, " ", ")\n");
}
if (unrecoverable_excp(regs))
printf("WARNING: exception is not recoverable, "
"can't continue\n");
remove_bpts();
disable_surveillance();
/* for breakpoint or single step, print the current instr. */
if (bp || TRAP(regs) == 0xd00)
ppc_inst_dump(regs->nip, 1, 0);
printf("enter ? for help\n");
}
cmd = cmds(regs);
insert_bpts();
in_xmon = 0;
#endif
#ifdef CONFIG_BOOKE
if (regs->msr & MSR_DE) {
bp = at_breakpoint(regs->nip);
if (bp != NULL) {
regs->nip = (unsigned long) &bp->instr[0];
atomic_inc(&bp->ref_count);
}
}
#else
if ((regs->msr & (MSR_IR|MSR_PR|MSR_64BIT)) == (MSR_IR|MSR_64BIT)) {
bp = at_breakpoint(regs->nip);
if (bp != NULL) {
int stepped = emulate_step(regs, bp->instr[0]);
if (stepped == 0) {
regs->nip = (unsigned long) &bp->instr[0];
atomic_inc(&bp->ref_count);
} else if (stepped < 0) {
printf("Couldn't single-step %s instruction\n",
(IS_RFID(bp->instr[0])? "rfid": "mtmsrd"));
}
}
}
#endif
insert_cpu_bpts();
touch_nmi_watchdog();
local_irq_restore(flags);
return cmd != 'X' && cmd != EOF;
}
int xmon(struct pt_regs *excp)
{
struct pt_regs regs;
if (excp == NULL) {
ppc_save_regs(&regs);
excp = &regs;
}
return xmon_core(excp, 0);
}
EXPORT_SYMBOL(xmon);
irqreturn_t xmon_irq(int irq, void *d)
{
unsigned long flags;
local_irq_save(flags);
printf("Keyboard interrupt\n");
xmon(get_irq_regs());
local_irq_restore(flags);
return IRQ_HANDLED;
}
static int xmon_bpt(struct pt_regs *regs)
{
struct bpt *bp;
unsigned long offset;
if ((regs->msr & (MSR_IR|MSR_PR|MSR_64BIT)) != (MSR_IR|MSR_64BIT))
return 0;
/* Are we at the trap at bp->instr[1] for some bp? */
bp = in_breakpoint_table(regs->nip, &offset);
if (bp != NULL && offset == 4) {
regs->nip = bp->address + 4;
atomic_dec(&bp->ref_count);
return 1;
}
/* Are we at a breakpoint? */
bp = at_breakpoint(regs->nip);
if (!bp)
return 0;
xmon_core(regs, 0);
return 1;
}
static int xmon_sstep(struct pt_regs *regs)
{
if (user_mode(regs))
return 0;
xmon_core(regs, 0);
return 1;
}
static int xmon_break_match(struct pt_regs *regs)
{
if ((regs->msr & (MSR_IR|MSR_PR|MSR_64BIT)) != (MSR_IR|MSR_64BIT))
return 0;
if (dabr.enabled == 0)
return 0;
xmon_core(regs, 0);
return 1;
}
static int xmon_iabr_match(struct pt_regs *regs)
{
if ((regs->msr & (MSR_IR|MSR_PR|MSR_64BIT)) != (MSR_IR|MSR_64BIT))
return 0;
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 08:27:16 +04:00
if (iabr == NULL)
return 0;
xmon_core(regs, 0);
return 1;
}
static int xmon_ipi(struct pt_regs *regs)
{
#ifdef CONFIG_SMP
if (in_xmon && !cpumask_test_cpu(smp_processor_id(), &cpus_in_xmon))
xmon_core(regs, 1);
#endif
return 0;
}
static int xmon_fault_handler(struct pt_regs *regs)
{
struct bpt *bp;
unsigned long offset;
if (in_xmon && catch_memory_errors)
handle_fault(regs); /* doesn't return */
if ((regs->msr & (MSR_IR|MSR_PR|MSR_64BIT)) == (MSR_IR|MSR_64BIT)) {
bp = in_breakpoint_table(regs->nip, &offset);
if (bp != NULL) {
regs->nip = bp->address + offset;
atomic_dec(&bp->ref_count);
}
}
return 0;
}
static struct bpt *at_breakpoint(unsigned long pc)
{
int i;
struct bpt *bp;
bp = bpts;
for (i = 0; i < NBPTS; ++i, ++bp)
if (bp->enabled && pc == bp->address)
return bp;
return NULL;
}
static struct bpt *in_breakpoint_table(unsigned long nip, unsigned long *offp)
{
unsigned long off;
off = nip - (unsigned long) bpts;
if (off >= sizeof(bpts))
return NULL;
off %= sizeof(struct bpt);
if (off != offsetof(struct bpt, instr[0])
&& off != offsetof(struct bpt, instr[1]))
return NULL;
*offp = off - offsetof(struct bpt, instr[0]);
return (struct bpt *) (nip - off);
}
static struct bpt *new_breakpoint(unsigned long a)
{
struct bpt *bp;
a &= ~3UL;
bp = at_breakpoint(a);
if (bp)
return bp;
for (bp = bpts; bp < &bpts[NBPTS]; ++bp) {
if (!bp->enabled && atomic_read(&bp->ref_count) == 0) {
bp->address = a;
bp->instr[1] = bpinstr;
store_inst(&bp->instr[1]);
return bp;
}
}
printf("Sorry, no free breakpoints. Please clear one first.\n");
return NULL;
}
static void insert_bpts(void)
{
int i;
struct bpt *bp;
bp = bpts;
for (i = 0; i < NBPTS; ++i, ++bp) {
if ((bp->enabled & (BP_TRAP|BP_CIABR)) == 0)
continue;
if (mread(bp->address, &bp->instr[0], 4) != 4) {
printf("Couldn't read instruction at %lx, "
"disabling breakpoint there\n", bp->address);
bp->enabled = 0;
continue;
}
if (IS_MTMSRD(bp->instr[0]) || IS_RFID(bp->instr[0])) {
printf("Breakpoint at %lx is on an mtmsrd or rfid "
"instruction, disabling it\n", bp->address);
bp->enabled = 0;
continue;
}
store_inst(&bp->instr[0]);
if (bp->enabled & BP_CIABR)
continue;
if (mwrite(bp->address, &bpinstr, 4) != 4) {
printf("Couldn't write instruction at %lx, "
"disabling breakpoint there\n", bp->address);
bp->enabled &= ~BP_TRAP;
continue;
}
store_inst((void *)bp->address);
}
}
static void insert_cpu_bpts(void)
{
struct arch_hw_breakpoint brk;
if (dabr.enabled) {
brk.address = dabr.address;
brk.type = (dabr.enabled & HW_BRK_TYPE_DABR) | HW_BRK_TYPE_PRIV_ALL;
brk.len = 8;
__set_breakpoint(&brk);
}
if (iabr)
set_ciabr(iabr->address);
}
static void remove_bpts(void)
{
int i;
struct bpt *bp;
unsigned instr;
bp = bpts;
for (i = 0; i < NBPTS; ++i, ++bp) {
if ((bp->enabled & (BP_TRAP|BP_CIABR)) != BP_TRAP)
continue;
if (mread(bp->address, &instr, 4) == 4
&& instr == bpinstr
&& mwrite(bp->address, &bp->instr, 4) != 4)
printf("Couldn't remove breakpoint at %lx\n",
bp->address);
else
store_inst((void *)bp->address);
}
}
static void remove_cpu_bpts(void)
{
hw_breakpoint_disable();
write_ciabr(0);
}
static void set_lpp_cmd(void)
{
unsigned long lpp;
if (!scanhex(&lpp)) {
printf("Invalid number.\n");
lpp = 0;
}
xmon_set_pagination_lpp(lpp);
}
/* Command interpreting routine */
static char *last_cmd;
static int
cmds(struct pt_regs *excp)
{
int cmd = 0;
last_cmd = NULL;
xmon_regs = excp;
if (!xmon_no_auto_backtrace) {
xmon_no_auto_backtrace = 1;
xmon_show_stack(excp->gpr[1], excp->link, excp->nip);
}
for(;;) {
#ifdef CONFIG_SMP
printf("%x:", smp_processor_id());
#endif /* CONFIG_SMP */
printf("mon> ");
flush_input();
termch = 0;
cmd = skipbl();
if( cmd == '\n' ) {
if (last_cmd == NULL)
continue;
take_input(last_cmd);
last_cmd = NULL;
cmd = inchar();
}
switch (cmd) {
case 'm':
cmd = inchar();
switch (cmd) {
case 'm':
case 's':
case 'd':
memops(cmd);
break;
case 'l':
memlocate();
break;
case 'z':
memzcan();
break;
case 'i':
show_mem(0);
break;
default:
termch = cmd;
memex();
}
break;
case 'd':
dump();
break;
case 'l':
symbol_lookup();
break;
case 'r':
prregs(excp); /* print regs */
break;
case 'e':
excprint(excp);
break;
case 'S':
super_regs();
break;
case 't':
backtrace(excp);
break;
case 'f':
cacheflush();
break;
case 's':
if (do_spu_cmd() == 0)
break;
if (do_step(excp))
return cmd;
break;
case 'x':
case 'X':
return cmd;
case EOF:
printf(" <no input ...>\n");
mdelay(2000);
return cmd;
case '?':
xmon_puts(help_string);
break;
case '#':
set_lpp_cmd();
break;
case 'b':
bpt_cmds();
break;
case 'C':
csum();
break;
case 'c':
if (cpu_cmd())
return 0;
break;
case 'z':
bootcmds();
break;
case 'p':
proccall();
break;
case 'P':
show_tasks();
break;
#ifdef CONFIG_PPC_STD_MMU
case 'u':
dump_segments();
break;
#elif defined(CONFIG_44x)
case 'u':
dump_tlb_44x();
break;
#elif defined(CONFIG_PPC_BOOK3E)
case 'u':
dump_tlb_book3e();
break;
#endif
default:
printf("Unrecognized command: ");
do {
if (' ' < cmd && cmd <= '~')
putchar(cmd);
else
printf("\\x%x", cmd);
cmd = inchar();
} while (cmd != '\n');
printf(" (type ? for help)\n");
break;
}
}
}
#ifdef CONFIG_BOOKE
static int do_step(struct pt_regs *regs)
{
regs->msr |= MSR_DE;
mtspr(SPRN_DBCR0, mfspr(SPRN_DBCR0) | DBCR0_IC | DBCR0_IDM);
return 1;
}
#else
/*
* Step a single instruction.
* Some instructions we emulate, others we execute with MSR_SE set.
*/
static int do_step(struct pt_regs *regs)
{
unsigned int instr;
int stepped;
/* check we are in 64-bit kernel mode, translation enabled */
if ((regs->msr & (MSR_64BIT|MSR_PR|MSR_IR)) == (MSR_64BIT|MSR_IR)) {
if (mread(regs->nip, &instr, 4) == 4) {
stepped = emulate_step(regs, instr);
if (stepped < 0) {
printf("Couldn't single-step %s instruction\n",
(IS_RFID(instr)? "rfid": "mtmsrd"));
return 0;
}
if (stepped > 0) {
regs->trap = 0xd00 | (regs->trap & 1);
printf("stepped to ");
xmon_print_symbol(regs->nip, " ", "\n");
ppc_inst_dump(regs->nip, 1, 0);
return 0;
}
}
}
regs->msr |= MSR_SE;
return 1;
}
#endif
static void bootcmds(void)
{
int cmd;
cmd = inchar();
if (cmd == 'r')
ppc_md.restart(NULL);
else if (cmd == 'h')
ppc_md.halt();
else if (cmd == 'p')
if (pm_power_off)
pm_power_off();
}
static int cpu_cmd(void)
{
#ifdef CONFIG_SMP
unsigned long cpu, first_cpu, last_cpu;
int timeout;
if (!scanhex(&cpu)) {
/* print cpus waiting or in xmon */
printf("cpus stopped:");
last_cpu = first_cpu = NR_CPUS;
for_each_possible_cpu(cpu) {
if (cpumask_test_cpu(cpu, &cpus_in_xmon)) {
if (cpu == last_cpu + 1) {
last_cpu = cpu;
} else {
if (last_cpu != first_cpu)
printf("-0x%lx", last_cpu);
last_cpu = first_cpu = cpu;
printf(" 0x%lx", cpu);
}
}
}
if (last_cpu != first_cpu)
printf("-0x%lx", last_cpu);
printf("\n");
return 0;
}
/* try to switch to cpu specified */
if (!cpumask_test_cpu(cpu, &cpus_in_xmon)) {
printf("cpu 0x%x isn't in xmon\n", cpu);
return 0;
}
xmon_taken = 0;
mb();
xmon_owner = cpu;
timeout = 10000000;
while (!xmon_taken) {
if (--timeout == 0) {
if (test_and_set_bit(0, &xmon_taken))
break;
/* take control back */
mb();
xmon_owner = smp_processor_id();
printf("cpu 0x%x didn't take control\n", cpu);
return 0;
}
barrier();
}
return 1;
#else
return 0;
#endif /* CONFIG_SMP */
}
static unsigned short fcstab[256] = {
0x0000, 0x1189, 0x2312, 0x329b, 0x4624, 0x57ad, 0x6536, 0x74bf,
0x8c48, 0x9dc1, 0xaf5a, 0xbed3, 0xca6c, 0xdbe5, 0xe97e, 0xf8f7,
0x1081, 0x0108, 0x3393, 0x221a, 0x56a5, 0x472c, 0x75b7, 0x643e,
0x9cc9, 0x8d40, 0xbfdb, 0xae52, 0xdaed, 0xcb64, 0xf9ff, 0xe876,
0x2102, 0x308b, 0x0210, 0x1399, 0x6726, 0x76af, 0x4434, 0x55bd,
0xad4a, 0xbcc3, 0x8e58, 0x9fd1, 0xeb6e, 0xfae7, 0xc87c, 0xd9f5,
0x3183, 0x200a, 0x1291, 0x0318, 0x77a7, 0x662e, 0x54b5, 0x453c,
0xbdcb, 0xac42, 0x9ed9, 0x8f50, 0xfbef, 0xea66, 0xd8fd, 0xc974,
0x4204, 0x538d, 0x6116, 0x709f, 0x0420, 0x15a9, 0x2732, 0x36bb,
0xce4c, 0xdfc5, 0xed5e, 0xfcd7, 0x8868, 0x99e1, 0xab7a, 0xbaf3,
0x5285, 0x430c, 0x7197, 0x601e, 0x14a1, 0x0528, 0x37b3, 0x263a,
0xdecd, 0xcf44, 0xfddf, 0xec56, 0x98e9, 0x8960, 0xbbfb, 0xaa72,
0x6306, 0x728f, 0x4014, 0x519d, 0x2522, 0x34ab, 0x0630, 0x17b9,
0xef4e, 0xfec7, 0xcc5c, 0xddd5, 0xa96a, 0xb8e3, 0x8a78, 0x9bf1,
0x7387, 0x620e, 0x5095, 0x411c, 0x35a3, 0x242a, 0x16b1, 0x0738,
0xffcf, 0xee46, 0xdcdd, 0xcd54, 0xb9eb, 0xa862, 0x9af9, 0x8b70,
0x8408, 0x9581, 0xa71a, 0xb693, 0xc22c, 0xd3a5, 0xe13e, 0xf0b7,
0x0840, 0x19c9, 0x2b52, 0x3adb, 0x4e64, 0x5fed, 0x6d76, 0x7cff,
0x9489, 0x8500, 0xb79b, 0xa612, 0xd2ad, 0xc324, 0xf1bf, 0xe036,
0x18c1, 0x0948, 0x3bd3, 0x2a5a, 0x5ee5, 0x4f6c, 0x7df7, 0x6c7e,
0xa50a, 0xb483, 0x8618, 0x9791, 0xe32e, 0xf2a7, 0xc03c, 0xd1b5,
0x2942, 0x38cb, 0x0a50, 0x1bd9, 0x6f66, 0x7eef, 0x4c74, 0x5dfd,
0xb58b, 0xa402, 0x9699, 0x8710, 0xf3af, 0xe226, 0xd0bd, 0xc134,
0x39c3, 0x284a, 0x1ad1, 0x0b58, 0x7fe7, 0x6e6e, 0x5cf5, 0x4d7c,
0xc60c, 0xd785, 0xe51e, 0xf497, 0x8028, 0x91a1, 0xa33a, 0xb2b3,
0x4a44, 0x5bcd, 0x6956, 0x78df, 0x0c60, 0x1de9, 0x2f72, 0x3efb,
0xd68d, 0xc704, 0xf59f, 0xe416, 0x90a9, 0x8120, 0xb3bb, 0xa232,
0x5ac5, 0x4b4c, 0x79d7, 0x685e, 0x1ce1, 0x0d68, 0x3ff3, 0x2e7a,
0xe70e, 0xf687, 0xc41c, 0xd595, 0xa12a, 0xb0a3, 0x8238, 0x93b1,
0x6b46, 0x7acf, 0x4854, 0x59dd, 0x2d62, 0x3ceb, 0x0e70, 0x1ff9,
0xf78f, 0xe606, 0xd49d, 0xc514, 0xb1ab, 0xa022, 0x92b9, 0x8330,
0x7bc7, 0x6a4e, 0x58d5, 0x495c, 0x3de3, 0x2c6a, 0x1ef1, 0x0f78
};
#define FCS(fcs, c) (((fcs) >> 8) ^ fcstab[((fcs) ^ (c)) & 0xff])
static void
csum(void)
{
unsigned int i;
unsigned short fcs;
unsigned char v;
if (!scanhex(&adrs))
return;
if (!scanhex(&ncsum))
return;
fcs = 0xffff;
for (i = 0; i < ncsum; ++i) {
if (mread(adrs+i, &v, 1) == 0) {
printf("csum stopped at "REG"\n", adrs+i);
break;
}
fcs = FCS(fcs, v);
}
printf("%x\n", fcs);
}
/*
* Check if this is a suitable place to put a breakpoint.
*/
static long check_bp_loc(unsigned long addr)
{
unsigned int instr;
addr &= ~3;
if (!is_kernel_addr(addr)) {
printf("Breakpoints may only be placed at kernel addresses\n");
return 0;
}
if (!mread(addr, &instr, sizeof(instr))) {
printf("Can't read instruction at address %lx\n", addr);
return 0;
}
if (IS_MTMSRD(instr) || IS_RFID(instr)) {
printf("Breakpoints may not be placed on mtmsrd or rfid "
"instructions\n");
return 0;
}
return 1;
}
static char *breakpoint_help_string =
"Breakpoint command usage:\n"
"b show breakpoints\n"
"b <addr> [cnt] set breakpoint at given instr addr\n"
"bc clear all breakpoints\n"
"bc <n/addr> clear breakpoint number n or at addr\n"
"bi <addr> [cnt] set hardware instr breakpoint (POWER8 only)\n"
"bd <addr> [cnt] set hardware data breakpoint\n"
"";
static void
bpt_cmds(void)
{
int cmd;
unsigned long a;
int mode, i;
struct bpt *bp;
const char badaddr[] = "Only kernel addresses are permitted "
"for breakpoints\n";
cmd = inchar();
switch (cmd) {
#ifndef CONFIG_8xx
case 'd': /* bd - hardware data breakpoint */
mode = 7;
cmd = inchar();
if (cmd == 'r')
mode = 5;
else if (cmd == 'w')
mode = 6;
else
termch = cmd;
dabr.address = 0;
dabr.enabled = 0;
if (scanhex(&dabr.address)) {
if (!is_kernel_addr(dabr.address)) {
printf(badaddr);
break;
}
dabr.address &= ~HW_BRK_TYPE_DABR;
dabr.enabled = mode | BP_DABR;
}
break;
case 'i': /* bi - hardware instr breakpoint */
if (!cpu_has_feature(CPU_FTR_ARCH_207S)) {
printf("Hardware instruction breakpoint "
"not supported on this cpu\n");
break;
}
if (iabr) {
iabr->enabled &= ~BP_CIABR;
iabr = NULL;
}
if (!scanhex(&a))
break;
if (!check_bp_loc(a))
break;
bp = new_breakpoint(a);
if (bp != NULL) {
bp->enabled |= BP_CIABR;
iabr = bp;
}
break;
#endif
case 'c':
if (!scanhex(&a)) {
/* clear all breakpoints */
for (i = 0; i < NBPTS; ++i)
bpts[i].enabled = 0;
iabr = NULL;
dabr.enabled = 0;
printf("All breakpoints cleared\n");
break;
}
if (a <= NBPTS && a >= 1) {
/* assume a breakpoint number */
bp = &bpts[a-1]; /* bp nums are 1 based */
} else {
/* assume a breakpoint address */
bp = at_breakpoint(a);
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 08:27:16 +04:00
if (bp == NULL) {
printf("No breakpoint at %lx\n", a);
break;
}
}
printf("Cleared breakpoint %lx (", BP_NUM(bp));
xmon_print_symbol(bp->address, " ", ")\n");
bp->enabled = 0;
break;
default:
termch = cmd;
cmd = skipbl();
if (cmd == '?') {
printf(breakpoint_help_string);
break;
}
termch = cmd;
if (!scanhex(&a)) {
/* print all breakpoints */
printf(" type address\n");
if (dabr.enabled) {
printf(" data "REG" [", dabr.address);
if (dabr.enabled & 1)
printf("r");
if (dabr.enabled & 2)
printf("w");
printf("]\n");
}
for (bp = bpts; bp < &bpts[NBPTS]; ++bp) {
if (!bp->enabled)
continue;
printf("%2x %s ", BP_NUM(bp),
(bp->enabled & BP_CIABR) ? "inst": "trap");
xmon_print_symbol(bp->address, " ", "\n");
}
break;
}
if (!check_bp_loc(a))
break;
bp = new_breakpoint(a);
if (bp != NULL)
bp->enabled |= BP_TRAP;
break;
}
}
/* Very cheap human name for vector lookup. */
static
const char *getvecname(unsigned long vec)
{
char *ret;
switch (vec) {
case 0x100: ret = "(System Reset)"; break;
case 0x200: ret = "(Machine Check)"; break;
case 0x300: ret = "(Data Access)"; break;
case 0x380: ret = "(Data SLB Access)"; break;
case 0x400: ret = "(Instruction Access)"; break;
case 0x480: ret = "(Instruction SLB Access)"; break;
case 0x500: ret = "(Hardware Interrupt)"; break;
case 0x600: ret = "(Alignment)"; break;
case 0x700: ret = "(Program Check)"; break;
case 0x800: ret = "(FPU Unavailable)"; break;
case 0x900: ret = "(Decrementer)"; break;
case 0x980: ret = "(Hypervisor Decrementer)"; break;
case 0xa00: ret = "(Doorbell)"; break;
case 0xc00: ret = "(System Call)"; break;
case 0xd00: ret = "(Single Step)"; break;
case 0xe40: ret = "(Emulation Assist)"; break;
case 0xe60: ret = "(HMI)"; break;
case 0xe80: ret = "(Hypervisor Doorbell)"; break;
case 0xf00: ret = "(Performance Monitor)"; break;
case 0xf20: ret = "(Altivec Unavailable)"; break;
case 0x1300: ret = "(Instruction Breakpoint)"; break;
case 0x1500: ret = "(Denormalisation)"; break;
case 0x1700: ret = "(Altivec Assist)"; break;
default: ret = "";
}
return ret;
}
static void get_function_bounds(unsigned long pc, unsigned long *startp,
unsigned long *endp)
{
unsigned long size, offset;
const char *name;
*startp = *endp = 0;
if (pc == 0)
return;
if (setjmp(bus_error_jmp) == 0) {
catch_memory_errors = 1;
sync();
name = kallsyms_lookup(pc, &size, &offset, NULL, tmpstr);
if (name != NULL) {
*startp = pc - offset;
*endp = pc - offset + size;
}
sync();
}
catch_memory_errors = 0;
}
#define LRSAVE_OFFSET (STACK_FRAME_LR_SAVE * sizeof(unsigned long))
#define MARKER_OFFSET (STACK_FRAME_MARKER * sizeof(unsigned long))
static void xmon_show_stack(unsigned long sp, unsigned long lr,
unsigned long pc)
{
int max_to_print = 64;
unsigned long ip;
unsigned long newsp;
unsigned long marker;
struct pt_regs regs;
while (max_to_print--) {
if (sp < PAGE_OFFSET) {
if (sp != 0)
printf("SP (%lx) is in userspace\n", sp);
break;
}
if (!mread(sp + LRSAVE_OFFSET, &ip, sizeof(unsigned long))
|| !mread(sp, &newsp, sizeof(unsigned long))) {
printf("Couldn't read stack frame at %lx\n", sp);
break;
}
/*
* For the first stack frame, try to work out if
* LR and/or the saved LR value in the bottommost
* stack frame are valid.
*/
if ((pc | lr) != 0) {
unsigned long fnstart, fnend;
unsigned long nextip;
int printip = 1;
get_function_bounds(pc, &fnstart, &fnend);
nextip = 0;
if (newsp > sp)
mread(newsp + LRSAVE_OFFSET, &nextip,
sizeof(unsigned long));
if (lr == ip) {
if (lr < PAGE_OFFSET
|| (fnstart <= lr && lr < fnend))
printip = 0;
} else if (lr == nextip) {
printip = 0;
} else if (lr >= PAGE_OFFSET
&& !(fnstart <= lr && lr < fnend)) {
printf("[link register ] ");
xmon_print_symbol(lr, " ", "\n");
}
if (printip) {
printf("["REG"] ", sp);
xmon_print_symbol(ip, " ", " (unreliable)\n");
}
pc = lr = 0;
} else {
printf("["REG"] ", sp);
xmon_print_symbol(ip, " ", "\n");
}
/* Look for "regshere" marker to see if this is
an exception frame. */
if (mread(sp + MARKER_OFFSET, &marker, sizeof(unsigned long))
&& marker == STACK_FRAME_REGS_MARKER) {
if (mread(sp + STACK_FRAME_OVERHEAD, &regs, sizeof(regs))
!= sizeof(regs)) {
printf("Couldn't read registers at %lx\n",
sp + STACK_FRAME_OVERHEAD);
break;
}
printf("--- Exception: %lx %s at ", regs.trap,
getvecname(TRAP(&regs)));
pc = regs.nip;
lr = regs.link;
xmon_print_symbol(pc, " ", "\n");
}
if (newsp == 0)
break;
sp = newsp;
}
}
static void backtrace(struct pt_regs *excp)
{
unsigned long sp;
if (scanhex(&sp))
xmon_show_stack(sp, 0, 0);
else
xmon_show_stack(excp->gpr[1], excp->link, excp->nip);
scannl();
}
static void print_bug_trap(struct pt_regs *regs)
{
#ifdef CONFIG_BUG
const struct bug_entry *bug;
unsigned long addr;
if (regs->msr & MSR_PR)
return; /* not in kernel */
addr = regs->nip; /* address of trap instruction */
if (addr < PAGE_OFFSET)
return;
bug = find_bug(regs->nip);
if (bug == NULL)
return;
if (is_warning_bug(bug))
return;
#ifdef CONFIG_DEBUG_BUGVERBOSE
printf("kernel BUG at %s:%u!\n",
bug->file, bug->line);
#else
printf("kernel BUG at %p!\n", (void *)bug->bug_addr);
#endif
#endif /* CONFIG_BUG */
}
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 08:27:16 +04:00
static void excprint(struct pt_regs *fp)
{
unsigned long trap;
#ifdef CONFIG_SMP
printf("cpu 0x%x: ", smp_processor_id());
#endif /* CONFIG_SMP */
trap = TRAP(fp);
printf("Vector: %lx %s at [%lx]\n", fp->trap, getvecname(trap), fp);
printf(" pc: ");
xmon_print_symbol(fp->nip, ": ", "\n");
printf(" lr: ", fp->link);
xmon_print_symbol(fp->link, ": ", "\n");
printf(" sp: %lx\n", fp->gpr[1]);
printf(" msr: %lx\n", fp->msr);
if (trap == 0x300 || trap == 0x380 || trap == 0x600 || trap == 0x200) {
printf(" dar: %lx\n", fp->dar);
if (trap != 0x380)
printf(" dsisr: %lx\n", fp->dsisr);
}
printf(" current = 0x%lx\n", current);
#ifdef CONFIG_PPC64
powerpc: Rework lazy-interrupt handling The current implementation of lazy interrupts handling has some issues that this tries to address. We don't do the various workarounds we need to do when re-enabling interrupts in some cases such as when returning from an interrupt and thus we may still lose or get delayed decrementer or doorbell interrupts. The current scheme also makes it much harder to handle the external "edge" interrupts provided by some BookE processors when using the EPR facility (External Proxy) and the Freescale Hypervisor. Additionally, we tend to keep interrupts hard disabled in a number of cases, such as decrementer interrupts, external interrupts, or when a masked decrementer interrupt is pending. This is sub-optimal. This is an attempt at fixing it all in one go by reworking the way we do the lazy interrupt disabling from the ground up. The base idea is to replace the "hard_enabled" field with a "irq_happened" field in which we store a bit mask of what interrupt occurred while soft-disabled. When re-enabling, either via arch_local_irq_restore() or when returning from an interrupt, we can now decide what to do by testing bits in that field. We then implement replaying of the missed interrupts either by re-using the existing exception frame (in exception exit case) or via the creation of a new one from an assembly trampoline (in the arch_local_irq_enable case). This removes the need to play with the decrementer to try to create fake interrupts, among others. In addition, this adds a few refinements: - We no longer hard disable decrementer interrupts that occur while soft-disabled. We now simply bump the decrementer back to max (on BookS) or leave it stopped (on BookE) and continue with hard interrupts enabled, which means that we'll potentially get better sample quality from performance monitor interrupts. - Timer, decrementer and doorbell interrupts now hard-enable shortly after removing the source of the interrupt, which means they no longer run entirely hard disabled. Again, this will improve perf sample quality. - On Book3E 64-bit, we now make the performance monitor interrupt act as an NMI like Book3S (the necessary C code for that to work appear to already be present in the FSL perf code, notably calling nmi_enter instead of irq_enter). (This also fixes a bug where BookE perfmon interrupts could clobber r14 ... oops) - We could make "masked" decrementer interrupts act as NMIs when doing timer-based perf sampling to improve the sample quality. Signed-off-by-yet: Benjamin Herrenschmidt <benh@kernel.crashing.org> --- v2: - Add hard-enable to decrementer, timer and doorbells - Fix CR clobber in masked irq handling on BookE - Make embedded perf interrupt act as an NMI - Add a PACA_HAPPENED_EE_EDGE for use by FSL if they want to retrigger an interrupt without preventing hard-enable v3: - Fix or vs. ori bug on Book3E - Fix enabling of interrupts for some exceptions on Book3E v4: - Fix resend of doorbells on return from interrupt on Book3E v5: - Rebased on top of my latest series, which involves some significant rework of some aspects of the patch. v6: - 32-bit compile fix - more compile fixes with various .config combos - factor out the asm code to soft-disable interrupts - remove the C wrapper around preempt_schedule_irq v7: - Fix a bug with hard irq state tracking on native power7
2012-03-06 11:27:59 +04:00
printf(" paca = 0x%lx\t softe: %d\t irq_happened: 0x%02x\n",
local_paca, local_paca->soft_enabled, local_paca->irq_happened);
#endif
if (current) {
printf(" pid = %ld, comm = %s\n",
current->pid, current->comm);
}
if (trap == 0x700)
print_bug_trap(fp);
printf(linux_banner);
}
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 08:27:16 +04:00
static void prregs(struct pt_regs *fp)
{
int n, trap;
unsigned long base;
struct pt_regs regs;
if (scanhex(&base)) {
if (setjmp(bus_error_jmp) == 0) {
catch_memory_errors = 1;
sync();
regs = *(struct pt_regs *)base;
sync();
__delay(200);
} else {
catch_memory_errors = 0;
printf("*** Error reading registers from "REG"\n",
base);
return;
}
catch_memory_errors = 0;
fp = &regs;
}
#ifdef CONFIG_PPC64
if (FULL_REGS(fp)) {
for (n = 0; n < 16; ++n)
printf("R%.2ld = "REG" R%.2ld = "REG"\n",
n, fp->gpr[n], n+16, fp->gpr[n+16]);
} else {
for (n = 0; n < 7; ++n)
printf("R%.2ld = "REG" R%.2ld = "REG"\n",
n, fp->gpr[n], n+7, fp->gpr[n+7]);
}
#else
for (n = 0; n < 32; ++n) {
printf("R%.2d = %.8x%s", n, fp->gpr[n],
(n & 3) == 3? "\n": " ");
if (n == 12 && !FULL_REGS(fp)) {
printf("\n");
break;
}
}
#endif
printf("pc = ");
xmon_print_symbol(fp->nip, " ", "\n");
if (TRAP(fp) != 0xc00 && cpu_has_feature(CPU_FTR_CFAR)) {
printf("cfar= ");
xmon_print_symbol(fp->orig_gpr3, " ", "\n");
}
printf("lr = ");
xmon_print_symbol(fp->link, " ", "\n");
printf("msr = "REG" cr = %.8lx\n", fp->msr, fp->ccr);
printf("ctr = "REG" xer = "REG" trap = %4lx\n",
fp->ctr, fp->xer, fp->trap);
trap = TRAP(fp);
if (trap == 0x300 || trap == 0x380 || trap == 0x600)
printf("dar = "REG" dsisr = %.8lx\n", fp->dar, fp->dsisr);
}
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 08:27:16 +04:00
static void cacheflush(void)
{
int cmd;
unsigned long nflush;
cmd = inchar();
if (cmd != 'i')
termch = cmd;
scanhex((void *)&adrs);
if (termch != '\n')
termch = 0;
nflush = 1;
scanhex(&nflush);
nflush = (nflush + L1_CACHE_BYTES - 1) / L1_CACHE_BYTES;
if (setjmp(bus_error_jmp) == 0) {
catch_memory_errors = 1;
sync();
if (cmd != 'i') {
for (; nflush > 0; --nflush, adrs += L1_CACHE_BYTES)
cflush((void *) adrs);
} else {
for (; nflush > 0; --nflush, adrs += L1_CACHE_BYTES)
cinval((void *) adrs);
}
sync();
/* wait a little while to see if we get a machine check */
__delay(200);
}
catch_memory_errors = 0;
}
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 14:31:24 +03:00
extern unsigned long xmon_mfspr(int spr, unsigned long default_value);
extern void xmon_mtspr(int spr, unsigned long value);
static int
read_spr(int n, unsigned long *vp)
{
unsigned long ret = -1UL;
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 14:31:24 +03:00
int ok = 0;
if (setjmp(bus_error_jmp) == 0) {
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 14:31:24 +03:00
catch_spr_faults = 1;
sync();
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 14:31:24 +03:00
ret = xmon_mfspr(n, *vp);
sync();
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 14:31:24 +03:00
*vp = ret;
ok = 1;
}
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 14:31:24 +03:00
catch_spr_faults = 0;
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 14:31:24 +03:00
return ok;
}
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 08:27:16 +04:00
static void
write_spr(int n, unsigned long val)
{
if (setjmp(bus_error_jmp) == 0) {
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 14:31:24 +03:00
catch_spr_faults = 1;
sync();
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 14:31:24 +03:00
xmon_mtspr(n, val);
sync();
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 14:31:24 +03:00
} else {
printf("SPR 0x%03x (%4d) Faulted during write\n", n, n);
}
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 14:31:24 +03:00
catch_spr_faults = 0;
}
static void dump_206_sprs(void)
{
#ifdef CONFIG_PPC64
if (!cpu_has_feature(CPU_FTR_ARCH_206))
return;
/* Actually some of these pre-date 2.06, but whatevs */
printf("srr0 = %.16x srr1 = %.16x dsisr = %.8x\n",
mfspr(SPRN_SRR0), mfspr(SPRN_SRR1), mfspr(SPRN_DSISR));
printf("dscr = %.16x ppr = %.16x pir = %.8x\n",
mfspr(SPRN_DSCR), mfspr(SPRN_PPR), mfspr(SPRN_PIR));
if (!(mfmsr() & MSR_HV))
return;
printf("sdr1 = %.16x hdar = %.16x hdsisr = %.8x\n",
mfspr(SPRN_SDR1), mfspr(SPRN_HDAR), mfspr(SPRN_HDSISR));
printf("hsrr0 = %.16x hsrr1 = %.16x hdec = %.8x\n",
mfspr(SPRN_HSRR0), mfspr(SPRN_HSRR1), mfspr(SPRN_HDEC));
printf("lpcr = %.16x pcr = %.16x lpidr = %.8x\n",
mfspr(SPRN_LPCR), mfspr(SPRN_PCR), mfspr(SPRN_LPID));
printf("hsprg0 = %.16x hsprg1 = %.16x\n",
mfspr(SPRN_HSPRG0), mfspr(SPRN_HSPRG1));
printf("dabr = %.16x dabrx = %.16x\n",
mfspr(SPRN_DABR), mfspr(SPRN_DABRX));
#endif
}
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 14:31:24 +03:00
static void dump_one_spr(int spr, bool show_unimplemented)
{
unsigned long val;
val = 0xdeadbeef;
if (!read_spr(spr, &val)) {
printf("SPR 0x%03x (%4d) Faulted during read\n", spr, spr);
return;
}
if (val == 0xdeadbeef) {
/* Looks like read was a nop, confirm */
val = 0x0badcafe;
if (!read_spr(spr, &val)) {
printf("SPR 0x%03x (%4d) Faulted during read\n", spr, spr);
return;
}
if (val == 0x0badcafe) {
if (show_unimplemented)
printf("SPR 0x%03x (%4d) Unimplemented\n", spr, spr);
return;
}
}
printf("SPR 0x%03x (%4d) = 0x%lx\n", spr, spr, val);
}
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 08:27:16 +04:00
static void super_regs(void)
{
static unsigned long regno;
int cmd;
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 14:31:24 +03:00
int spr;
cmd = skipbl();
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 14:31:24 +03:00
switch (cmd) {
case '\n': {
unsigned long sp, toc;
asm("mr %0,1" : "=r" (sp) :);
asm("mr %0,2" : "=r" (toc) :);
printf("msr = "REG" sprg0 = "REG"\n",
mfmsr(), mfspr(SPRN_SPRG0));
printf("pvr = "REG" sprg1 = "REG"\n",
mfspr(SPRN_PVR), mfspr(SPRN_SPRG1));
printf("dec = "REG" sprg2 = "REG"\n",
mfspr(SPRN_DEC), mfspr(SPRN_SPRG2));
printf("sp = "REG" sprg3 = "REG"\n", sp, mfspr(SPRN_SPRG3));
printf("toc = "REG" dar = "REG"\n", toc, mfspr(SPRN_DAR));
dump_206_sprs();
return;
}
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 14:31:24 +03:00
case 'w': {
unsigned long val;
scanhex(&regno);
val = 0;
read_spr(regno, &val);
scanhex(&val);
write_spr(regno, val);
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 14:31:24 +03:00
dump_one_spr(regno, true);
break;
}
case 'r':
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 14:31:24 +03:00
scanhex(&regno);
dump_one_spr(regno, true);
break;
case 'a':
/* dump ALL SPRs */
for (spr = 1; spr < 1024; ++spr)
dump_one_spr(spr, false);
break;
}
powerpc/xmon: Fix SPR read/write commands and add command to dump SPRs xmon has commands for reading and writing SPRs, but they don't work currently for several reasons. They attempt to synthesize a small function containing an mfspr or mtspr instruction and call it. However, the instructions are on the stack, which is usually not executable. Also, for 64-bit we set up a procedure descriptor, which is fine for the big-endian ABIv1, but not correct for ABIv2. Finally, the code uses the infrastructure for catching memory errors, but that only catches data storage interrupts and machine check interrupts, but a failed mfspr/mtspr can generate a program interrupt or a hypervisor emulation assist interrupt, or be a no-op. Instead of trying to synthesize a function on the fly, this adds two new functions, xmon_mfspr() and xmon_mtspr(), which take an SPR number as an argument and read or write the SPR. Because there is no Power ISA instruction which takes an SPR number in a register, we have to generate one of each possible mfspr and mtspr instruction, for all 1024 possible SPRs. Thus we get just over 8k bytes of code for each of xmon_mfspr() and xmon_mtspr(). However, this 16kB of code pales in comparison to the > 130kB of PPC opcode tables used by the xmon disassembler. To catch interrupts caused by the mfspr/mtspr instructions, we add a new 'catch_spr_faults' flag. If an interrupt occurs while it is set, we come back into xmon() via program_check_interrupt(), _exception() and die(), see that catch_spr_faults is set and do a longjmp to bus_error_jmp, back into read_spr() or write_spr(). This adds a couple of other nice features: first, a "Sa" command that attempts to read and print out the value of all 1024 SPRs. If any mfspr instruction acts as a no-op, then the SPR is not implemented and not printed. Secondly, the Sr and Sw commands detect when an SPR is not implemented (i.e. mfspr is a no-op) and print a message to that effect rather than printing a bogus value. Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-04-13 14:31:24 +03:00
scannl();
}
/*
* Stuff for reading and writing memory safely
*/
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 08:27:16 +04:00
static int
mread(unsigned long adrs, void *buf, int size)
{
volatile int n;
char *p, *q;
n = 0;
if (setjmp(bus_error_jmp) == 0) {
catch_memory_errors = 1;
sync();
p = (char *)adrs;
q = (char *)buf;
switch (size) {
case 2:
*(u16 *)q = *(u16 *)p;
break;
case 4:
*(u32 *)q = *(u32 *)p;
break;
case 8:
*(u64 *)q = *(u64 *)p;
break;
default:
for( ; n < size; ++n) {
*q++ = *p++;
sync();
}
}
sync();
/* wait a little while to see if we get a machine check */
__delay(200);
n = size;
}
catch_memory_errors = 0;
return n;
}
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 08:27:16 +04:00
static int
mwrite(unsigned long adrs, void *buf, int size)
{
volatile int n;
char *p, *q;
n = 0;
if (setjmp(bus_error_jmp) == 0) {
catch_memory_errors = 1;
sync();
p = (char *) adrs;
q = (char *) buf;
switch (size) {
case 2:
*(u16 *)p = *(u16 *)q;
break;
case 4:
*(u32 *)p = *(u32 *)q;
break;
case 8:
*(u64 *)p = *(u64 *)q;
break;
default:
for ( ; n < size; ++n) {
*p++ = *q++;
sync();
}
}
sync();
/* wait a little while to see if we get a machine check */
__delay(200);
n = size;
} else {
printf("*** Error writing address "REG"\n", adrs + n);
}
catch_memory_errors = 0;
return n;
}
static int fault_type;
static int fault_except;
static char *fault_chars[] = { "--", "**", "##" };
static int handle_fault(struct pt_regs *regs)
{
fault_except = TRAP(regs);
switch (TRAP(regs)) {
case 0x200:
fault_type = 0;
break;
case 0x300:
case 0x380:
fault_type = 1;
break;
default:
fault_type = 2;
}
longjmp(bus_error_jmp, 1);
return 0;
}
#define SWAP(a, b, t) ((t) = (a), (a) = (b), (b) = (t))
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 08:27:16 +04:00
static void
byterev(unsigned char *val, int size)
{
int t;
switch (size) {
case 2:
SWAP(val[0], val[1], t);
break;
case 4:
SWAP(val[0], val[3], t);
SWAP(val[1], val[2], t);
break;
case 8: /* is there really any use for this? */
SWAP(val[0], val[7], t);
SWAP(val[1], val[6], t);
SWAP(val[2], val[5], t);
SWAP(val[3], val[4], t);
break;
}
}
static int brev;
static int mnoread;
static char *memex_help_string =
"Memory examine command usage:\n"
"m [addr] [flags] examine/change memory\n"
" addr is optional. will start where left off.\n"
" flags may include chars from this set:\n"
" b modify by bytes (default)\n"
" w modify by words (2 byte)\n"
" l modify by longs (4 byte)\n"
" d modify by doubleword (8 byte)\n"
" r toggle reverse byte order mode\n"
" n do not read memory (for i/o spaces)\n"
" . ok to read (default)\n"
"NOTE: flags are saved as defaults\n"
"";
static char *memex_subcmd_help_string =
"Memory examine subcommands:\n"
" hexval write this val to current location\n"
" 'string' write chars from string to this location\n"
" ' increment address\n"
" ^ decrement address\n"
" / increment addr by 0x10. //=0x100, ///=0x1000, etc\n"
" \\ decrement addr by 0x10. \\\\=0x100, \\\\\\=0x1000, etc\n"
" ` clear no-read flag\n"
" ; stay at this addr\n"
" v change to byte mode\n"
" w change to word (2 byte) mode\n"
" l change to long (4 byte) mode\n"
" u change to doubleword (8 byte) mode\n"
" m addr change current addr\n"
" n toggle no-read flag\n"
" r toggle byte reverse flag\n"
" < count back up count bytes\n"
" > count skip forward count bytes\n"
" x exit this mode\n"
"";
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 08:27:16 +04:00
static void
memex(void)
{
int cmd, inc, i, nslash;
unsigned long n;
unsigned char val[16];
scanhex((void *)&adrs);
cmd = skipbl();
if (cmd == '?') {
printf(memex_help_string);
return;
} else {
termch = cmd;
}
last_cmd = "m\n";
while ((cmd = skipbl()) != '\n') {
switch( cmd ){
case 'b': size = 1; break;
case 'w': size = 2; break;
case 'l': size = 4; break;
case 'd': size = 8; break;
case 'r': brev = !brev; break;
case 'n': mnoread = 1; break;
case '.': mnoread = 0; break;
}
}
if( size <= 0 )
size = 1;
else if( size > 8 )
size = 8;
for(;;){
if (!mnoread)
n = mread(adrs, val, size);
printf(REG"%c", adrs, brev? 'r': ' ');
if (!mnoread) {
if (brev)
byterev(val, size);
putchar(' ');
for (i = 0; i < n; ++i)
printf("%.2x", val[i]);
for (; i < size; ++i)
printf("%s", fault_chars[fault_type]);
}
putchar(' ');
inc = size;
nslash = 0;
for(;;){
if( scanhex(&n) ){
for (i = 0; i < size; ++i)
val[i] = n >> (i * 8);
if (!brev)
byterev(val, size);
mwrite(adrs, val, size);
inc = size;
}
cmd = skipbl();
if (cmd == '\n')
break;
inc = 0;
switch (cmd) {
case '\'':
for(;;){
n = inchar();
if( n == '\\' )
n = bsesc();
else if( n == '\'' )
break;
for (i = 0; i < size; ++i)
val[i] = n >> (i * 8);
if (!brev)
byterev(val, size);
mwrite(adrs, val, size);
adrs += size;
}
adrs -= size;
inc = size;
break;
case ',':
adrs += size;
break;
case '.':
mnoread = 0;
break;
case ';':
break;
case 'x':
case EOF:
scannl();
return;
case 'b':
case 'v':
size = 1;
break;
case 'w':
size = 2;
break;
case 'l':
size = 4;
break;
case 'u':
size = 8;
break;
case '^':
adrs -= size;
break;
case '/':
if (nslash > 0)
adrs -= 1 << nslash;
else
nslash = 0;
nslash += 4;
adrs += 1 << nslash;
break;
case '\\':
if (nslash < 0)
adrs += 1 << -nslash;
else
nslash = 0;
nslash -= 4;
adrs -= 1 << -nslash;
break;
case 'm':
scanhex((void *)&adrs);
break;
case 'n':
mnoread = 1;
break;
case 'r':
brev = !brev;
break;
case '<':
n = size;
scanhex(&n);
adrs -= n;
break;
case '>':
n = size;
scanhex(&n);
adrs += n;
break;
case '?':
printf(memex_subcmd_help_string);
break;
}
}
adrs += inc;
}
}
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 08:27:16 +04:00
static int
bsesc(void)
{
int c;
c = inchar();
switch( c ){
case 'n': c = '\n'; break;
case 'r': c = '\r'; break;
case 'b': c = '\b'; break;
case 't': c = '\t'; break;
}
return c;
}
static void xmon_rawdump (unsigned long adrs, long ndump)
{
long n, m, r, nr;
unsigned char temp[16];
for (n = ndump; n > 0;) {
r = n < 16? n: 16;
nr = mread(adrs, temp, r);
adrs += nr;
for (m = 0; m < r; ++m) {
if (m < nr)
printf("%.2x", temp[m]);
else
printf("%s", fault_chars[fault_type]);
}
n -= r;
if (nr < r)
break;
}
printf("\n");
}
powerpc: Add an xmon command to dump one or all pacas This was originally motivated by a desire to see the mapping between logical and hardware cpu numbers. But it seemed that it made more sense to just add a command to dump (most of) the paca. With no arguments "dp" will dump the paca for the current cpu. It also takes an argument, eg. "dp 3" which is the logical cpu number in hex. This form does not check if the cpu is possible, but displays the paca regardless, as well as the cpu's state in the possible, present and online masks. Thirdly, "dpa" will display the paca for all possible cpus. If there are no possible cpus, like early in boot, it will tell you that. Sample output, number in brackets is the offset into the struct: 2:mon> dp 3 paca for cpu 0x3 @ c00000000ff20a80: possible = yes present = yes online = yes lock_token = 0x8000 (0x8) paca_index = 0x3 (0xa) kernel_toc = 0xc00000000144f990 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001032 (0x20) stab_real = 0x0 (0x28) stab_addr = 0x0 (0x30) emergency_sp = 0xc00000003ffe4000 (0x38) data_offset = 0xa40000 (0x40) hw_cpu_id = 0x9 (0x50) cpu_start = 0x1 (0x52) kexec_state = 0x0 (0x53) __current = 0xc00000007e568680 (0x218) kstack = 0xc00000007e5a3e30 (0x220) stab_rr = 0x1a (0x228) saved_r1 = 0xc00000007e7cb450 (0x230) trap_save = 0x0 (0x240) soft_enabled = 0x0 (0x242) irq_happened = 0x0 (0x243) io_sync = 0x0 (0x244) irq_work_pending = 0x0 (0x245) nap_state_lost = 0x0 (0x246) Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-14 03:01:31 +04:00
#ifdef CONFIG_PPC64
static void dump_one_paca(int cpu)
{
struct paca_struct *p;
powerpc/xmon: Add some more elements to the existing PACA dump list This patch adds a set of new elements to the existing PACA dump list inside an xmon session which can be listed below improving the overall xmon debug support. With this patch, a typical xmon PACA dump looks something like this. paca for cpu 0x0 @ c00000000fdc0000: possible = yes present = yes online = yes lock_token = 0x8000 (0xa) paca_index = 0x0 (0x8) kernel_toc = 0xc000000001393200 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001033 (0x20) emergency_sp = 0xc00000003fff0000 (0x28) mc_emergency_sp = 0xc00000003ffec000 (0x2e0) in_mce = 0x0 (0x2e8) hmi_event_available = 0x0 (0x2ea) data_offset = 0x1fe7b0000 (0x30) hw_cpu_id = 0x0 (0x38) cpu_start = 0x1 (0x3a) kexec_state = 0x0 (0x3b) slb_shadow[0]: = 0xc000000008000000 0x40016e7779000510 slb_shadow[1]: = 0xd000000008000001 0x400142add1000510 vmalloc_sllp = 0x510 (0x1b8) slb_cache_ptr = 0x4 (0x1ba) slb_cache[0]: = 0x000000000003f000 slb_cache[1]: = 0x0000000000000001 slb_cache[2]: = 0x0000000000000003 slb_cache[3]: = 0x0000000000001000 slb_cache[4]: = 0x0000000000001000 slb_cache[5]: = 0x0000000000000000 slb_cache[6]: = 0x0000000000000000 slb_cache[7]: = 0x0000000000000000 dscr_default = 0x0 (0x58) __current = 0xc000000001331e80 (0x290) kstack = 0xc000000001393e30 (0x298) stab_rr = 0x11 (0x2a0) saved_r1 = 0xc0000001fffef5e0 (0x2a8) trap_save = 0x0 (0x2b8) soft_enabled = 0x0 (0x2ba) irq_happened = 0x1 (0x2bb) io_sync = 0x0 (0x2bc) irq_work_pending = 0x0 (0x2bd) nap_state_lost = 0x0 (0x2be) sprg_vdso = 0x0 (0x2c0) tm_scratch = 0x8000000100009033 (0x2c8) core_idle_state_ptr = (null) (0x2d0) thread_idle_state = 0x0 (0x2d8) thread_mask = 0x0 (0x2d9) subcore_sibling_mask = 0x0 (0x2da) user_time = 0x0 (0x2f0) system_time = 0x0 (0x2f8) user_time_scaled = 0x0 (0x300) starttime = 0x3f462418b5cf4 (0x308) starttime_user = 0x3f4622a57092a (0x310) startspurr = 0xd62a5718 (0x318) utime_sspurr = 0x0 (0x320) stolen_time = 0x0 (0x328) Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> [mpe: Endian swap slb_shadow before display, minor formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-14 08:58:36 +03:00
#ifdef CONFIG_PPC_STD_MMU_64
int i = 0;
#endif
powerpc: Add an xmon command to dump one or all pacas This was originally motivated by a desire to see the mapping between logical and hardware cpu numbers. But it seemed that it made more sense to just add a command to dump (most of) the paca. With no arguments "dp" will dump the paca for the current cpu. It also takes an argument, eg. "dp 3" which is the logical cpu number in hex. This form does not check if the cpu is possible, but displays the paca regardless, as well as the cpu's state in the possible, present and online masks. Thirdly, "dpa" will display the paca for all possible cpus. If there are no possible cpus, like early in boot, it will tell you that. Sample output, number in brackets is the offset into the struct: 2:mon> dp 3 paca for cpu 0x3 @ c00000000ff20a80: possible = yes present = yes online = yes lock_token = 0x8000 (0x8) paca_index = 0x3 (0xa) kernel_toc = 0xc00000000144f990 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001032 (0x20) stab_real = 0x0 (0x28) stab_addr = 0x0 (0x30) emergency_sp = 0xc00000003ffe4000 (0x38) data_offset = 0xa40000 (0x40) hw_cpu_id = 0x9 (0x50) cpu_start = 0x1 (0x52) kexec_state = 0x0 (0x53) __current = 0xc00000007e568680 (0x218) kstack = 0xc00000007e5a3e30 (0x220) stab_rr = 0x1a (0x228) saved_r1 = 0xc00000007e7cb450 (0x230) trap_save = 0x0 (0x240) soft_enabled = 0x0 (0x242) irq_happened = 0x0 (0x243) io_sync = 0x0 (0x244) irq_work_pending = 0x0 (0x245) nap_state_lost = 0x0 (0x246) Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-14 03:01:31 +04:00
if (setjmp(bus_error_jmp) != 0) {
printf("*** Error dumping paca for cpu 0x%x!\n", cpu);
return;
}
catch_memory_errors = 1;
sync();
p = &paca[cpu];
printf("paca for cpu 0x%x @ %p:\n", cpu, p);
powerpc/xmon: Add some more elements to the existing PACA dump list This patch adds a set of new elements to the existing PACA dump list inside an xmon session which can be listed below improving the overall xmon debug support. With this patch, a typical xmon PACA dump looks something like this. paca for cpu 0x0 @ c00000000fdc0000: possible = yes present = yes online = yes lock_token = 0x8000 (0xa) paca_index = 0x0 (0x8) kernel_toc = 0xc000000001393200 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001033 (0x20) emergency_sp = 0xc00000003fff0000 (0x28) mc_emergency_sp = 0xc00000003ffec000 (0x2e0) in_mce = 0x0 (0x2e8) hmi_event_available = 0x0 (0x2ea) data_offset = 0x1fe7b0000 (0x30) hw_cpu_id = 0x0 (0x38) cpu_start = 0x1 (0x3a) kexec_state = 0x0 (0x3b) slb_shadow[0]: = 0xc000000008000000 0x40016e7779000510 slb_shadow[1]: = 0xd000000008000001 0x400142add1000510 vmalloc_sllp = 0x510 (0x1b8) slb_cache_ptr = 0x4 (0x1ba) slb_cache[0]: = 0x000000000003f000 slb_cache[1]: = 0x0000000000000001 slb_cache[2]: = 0x0000000000000003 slb_cache[3]: = 0x0000000000001000 slb_cache[4]: = 0x0000000000001000 slb_cache[5]: = 0x0000000000000000 slb_cache[6]: = 0x0000000000000000 slb_cache[7]: = 0x0000000000000000 dscr_default = 0x0 (0x58) __current = 0xc000000001331e80 (0x290) kstack = 0xc000000001393e30 (0x298) stab_rr = 0x11 (0x2a0) saved_r1 = 0xc0000001fffef5e0 (0x2a8) trap_save = 0x0 (0x2b8) soft_enabled = 0x0 (0x2ba) irq_happened = 0x1 (0x2bb) io_sync = 0x0 (0x2bc) irq_work_pending = 0x0 (0x2bd) nap_state_lost = 0x0 (0x2be) sprg_vdso = 0x0 (0x2c0) tm_scratch = 0x8000000100009033 (0x2c8) core_idle_state_ptr = (null) (0x2d0) thread_idle_state = 0x0 (0x2d8) thread_mask = 0x0 (0x2d9) subcore_sibling_mask = 0x0 (0x2da) user_time = 0x0 (0x2f0) system_time = 0x0 (0x2f8) user_time_scaled = 0x0 (0x300) starttime = 0x3f462418b5cf4 (0x308) starttime_user = 0x3f4622a57092a (0x310) startspurr = 0xd62a5718 (0x318) utime_sspurr = 0x0 (0x320) stolen_time = 0x0 (0x328) Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> [mpe: Endian swap slb_shadow before display, minor formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-14 08:58:36 +03:00
printf(" %-*s = %s\n", 20, "possible", cpu_possible(cpu) ? "yes" : "no");
printf(" %-*s = %s\n", 20, "present", cpu_present(cpu) ? "yes" : "no");
printf(" %-*s = %s\n", 20, "online", cpu_online(cpu) ? "yes" : "no");
powerpc: Add an xmon command to dump one or all pacas This was originally motivated by a desire to see the mapping between logical and hardware cpu numbers. But it seemed that it made more sense to just add a command to dump (most of) the paca. With no arguments "dp" will dump the paca for the current cpu. It also takes an argument, eg. "dp 3" which is the logical cpu number in hex. This form does not check if the cpu is possible, but displays the paca regardless, as well as the cpu's state in the possible, present and online masks. Thirdly, "dpa" will display the paca for all possible cpus. If there are no possible cpus, like early in boot, it will tell you that. Sample output, number in brackets is the offset into the struct: 2:mon> dp 3 paca for cpu 0x3 @ c00000000ff20a80: possible = yes present = yes online = yes lock_token = 0x8000 (0x8) paca_index = 0x3 (0xa) kernel_toc = 0xc00000000144f990 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001032 (0x20) stab_real = 0x0 (0x28) stab_addr = 0x0 (0x30) emergency_sp = 0xc00000003ffe4000 (0x38) data_offset = 0xa40000 (0x40) hw_cpu_id = 0x9 (0x50) cpu_start = 0x1 (0x52) kexec_state = 0x0 (0x53) __current = 0xc00000007e568680 (0x218) kstack = 0xc00000007e5a3e30 (0x220) stab_rr = 0x1a (0x228) saved_r1 = 0xc00000007e7cb450 (0x230) trap_save = 0x0 (0x240) soft_enabled = 0x0 (0x242) irq_happened = 0x0 (0x243) io_sync = 0x0 (0x244) irq_work_pending = 0x0 (0x245) nap_state_lost = 0x0 (0x246) Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-14 03:01:31 +04:00
#define DUMP(paca, name, format) \
powerpc/xmon: Add some more elements to the existing PACA dump list This patch adds a set of new elements to the existing PACA dump list inside an xmon session which can be listed below improving the overall xmon debug support. With this patch, a typical xmon PACA dump looks something like this. paca for cpu 0x0 @ c00000000fdc0000: possible = yes present = yes online = yes lock_token = 0x8000 (0xa) paca_index = 0x0 (0x8) kernel_toc = 0xc000000001393200 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001033 (0x20) emergency_sp = 0xc00000003fff0000 (0x28) mc_emergency_sp = 0xc00000003ffec000 (0x2e0) in_mce = 0x0 (0x2e8) hmi_event_available = 0x0 (0x2ea) data_offset = 0x1fe7b0000 (0x30) hw_cpu_id = 0x0 (0x38) cpu_start = 0x1 (0x3a) kexec_state = 0x0 (0x3b) slb_shadow[0]: = 0xc000000008000000 0x40016e7779000510 slb_shadow[1]: = 0xd000000008000001 0x400142add1000510 vmalloc_sllp = 0x510 (0x1b8) slb_cache_ptr = 0x4 (0x1ba) slb_cache[0]: = 0x000000000003f000 slb_cache[1]: = 0x0000000000000001 slb_cache[2]: = 0x0000000000000003 slb_cache[3]: = 0x0000000000001000 slb_cache[4]: = 0x0000000000001000 slb_cache[5]: = 0x0000000000000000 slb_cache[6]: = 0x0000000000000000 slb_cache[7]: = 0x0000000000000000 dscr_default = 0x0 (0x58) __current = 0xc000000001331e80 (0x290) kstack = 0xc000000001393e30 (0x298) stab_rr = 0x11 (0x2a0) saved_r1 = 0xc0000001fffef5e0 (0x2a8) trap_save = 0x0 (0x2b8) soft_enabled = 0x0 (0x2ba) irq_happened = 0x1 (0x2bb) io_sync = 0x0 (0x2bc) irq_work_pending = 0x0 (0x2bd) nap_state_lost = 0x0 (0x2be) sprg_vdso = 0x0 (0x2c0) tm_scratch = 0x8000000100009033 (0x2c8) core_idle_state_ptr = (null) (0x2d0) thread_idle_state = 0x0 (0x2d8) thread_mask = 0x0 (0x2d9) subcore_sibling_mask = 0x0 (0x2da) user_time = 0x0 (0x2f0) system_time = 0x0 (0x2f8) user_time_scaled = 0x0 (0x300) starttime = 0x3f462418b5cf4 (0x308) starttime_user = 0x3f4622a57092a (0x310) startspurr = 0xd62a5718 (0x318) utime_sspurr = 0x0 (0x320) stolen_time = 0x0 (0x328) Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> [mpe: Endian swap slb_shadow before display, minor formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-14 08:58:36 +03:00
printf(" %-*s = %#-*"format"\t(0x%lx)\n", 20, #name, 18, paca->name, \
powerpc: Add an xmon command to dump one or all pacas This was originally motivated by a desire to see the mapping between logical and hardware cpu numbers. But it seemed that it made more sense to just add a command to dump (most of) the paca. With no arguments "dp" will dump the paca for the current cpu. It also takes an argument, eg. "dp 3" which is the logical cpu number in hex. This form does not check if the cpu is possible, but displays the paca regardless, as well as the cpu's state in the possible, present and online masks. Thirdly, "dpa" will display the paca for all possible cpus. If there are no possible cpus, like early in boot, it will tell you that. Sample output, number in brackets is the offset into the struct: 2:mon> dp 3 paca for cpu 0x3 @ c00000000ff20a80: possible = yes present = yes online = yes lock_token = 0x8000 (0x8) paca_index = 0x3 (0xa) kernel_toc = 0xc00000000144f990 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001032 (0x20) stab_real = 0x0 (0x28) stab_addr = 0x0 (0x30) emergency_sp = 0xc00000003ffe4000 (0x38) data_offset = 0xa40000 (0x40) hw_cpu_id = 0x9 (0x50) cpu_start = 0x1 (0x52) kexec_state = 0x0 (0x53) __current = 0xc00000007e568680 (0x218) kstack = 0xc00000007e5a3e30 (0x220) stab_rr = 0x1a (0x228) saved_r1 = 0xc00000007e7cb450 (0x230) trap_save = 0x0 (0x240) soft_enabled = 0x0 (0x242) irq_happened = 0x0 (0x243) io_sync = 0x0 (0x244) irq_work_pending = 0x0 (0x245) nap_state_lost = 0x0 (0x246) Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-14 03:01:31 +04:00
offsetof(struct paca_struct, name));
DUMP(p, lock_token, "x");
DUMP(p, paca_index, "x");
DUMP(p, kernel_toc, "lx");
DUMP(p, kernelbase, "lx");
DUMP(p, kernel_msr, "lx");
DUMP(p, emergency_sp, "p");
#ifdef CONFIG_PPC_BOOK3S_64
DUMP(p, mc_emergency_sp, "p");
DUMP(p, in_mce, "x");
powerpc/xmon: Add some more elements to the existing PACA dump list This patch adds a set of new elements to the existing PACA dump list inside an xmon session which can be listed below improving the overall xmon debug support. With this patch, a typical xmon PACA dump looks something like this. paca for cpu 0x0 @ c00000000fdc0000: possible = yes present = yes online = yes lock_token = 0x8000 (0xa) paca_index = 0x0 (0x8) kernel_toc = 0xc000000001393200 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001033 (0x20) emergency_sp = 0xc00000003fff0000 (0x28) mc_emergency_sp = 0xc00000003ffec000 (0x2e0) in_mce = 0x0 (0x2e8) hmi_event_available = 0x0 (0x2ea) data_offset = 0x1fe7b0000 (0x30) hw_cpu_id = 0x0 (0x38) cpu_start = 0x1 (0x3a) kexec_state = 0x0 (0x3b) slb_shadow[0]: = 0xc000000008000000 0x40016e7779000510 slb_shadow[1]: = 0xd000000008000001 0x400142add1000510 vmalloc_sllp = 0x510 (0x1b8) slb_cache_ptr = 0x4 (0x1ba) slb_cache[0]: = 0x000000000003f000 slb_cache[1]: = 0x0000000000000001 slb_cache[2]: = 0x0000000000000003 slb_cache[3]: = 0x0000000000001000 slb_cache[4]: = 0x0000000000001000 slb_cache[5]: = 0x0000000000000000 slb_cache[6]: = 0x0000000000000000 slb_cache[7]: = 0x0000000000000000 dscr_default = 0x0 (0x58) __current = 0xc000000001331e80 (0x290) kstack = 0xc000000001393e30 (0x298) stab_rr = 0x11 (0x2a0) saved_r1 = 0xc0000001fffef5e0 (0x2a8) trap_save = 0x0 (0x2b8) soft_enabled = 0x0 (0x2ba) irq_happened = 0x1 (0x2bb) io_sync = 0x0 (0x2bc) irq_work_pending = 0x0 (0x2bd) nap_state_lost = 0x0 (0x2be) sprg_vdso = 0x0 (0x2c0) tm_scratch = 0x8000000100009033 (0x2c8) core_idle_state_ptr = (null) (0x2d0) thread_idle_state = 0x0 (0x2d8) thread_mask = 0x0 (0x2d9) subcore_sibling_mask = 0x0 (0x2da) user_time = 0x0 (0x2f0) system_time = 0x0 (0x2f8) user_time_scaled = 0x0 (0x300) starttime = 0x3f462418b5cf4 (0x308) starttime_user = 0x3f4622a57092a (0x310) startspurr = 0xd62a5718 (0x318) utime_sspurr = 0x0 (0x320) stolen_time = 0x0 (0x328) Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> [mpe: Endian swap slb_shadow before display, minor formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-14 08:58:36 +03:00
DUMP(p, hmi_event_available, "x");
#endif
powerpc: Add an xmon command to dump one or all pacas This was originally motivated by a desire to see the mapping between logical and hardware cpu numbers. But it seemed that it made more sense to just add a command to dump (most of) the paca. With no arguments "dp" will dump the paca for the current cpu. It also takes an argument, eg. "dp 3" which is the logical cpu number in hex. This form does not check if the cpu is possible, but displays the paca regardless, as well as the cpu's state in the possible, present and online masks. Thirdly, "dpa" will display the paca for all possible cpus. If there are no possible cpus, like early in boot, it will tell you that. Sample output, number in brackets is the offset into the struct: 2:mon> dp 3 paca for cpu 0x3 @ c00000000ff20a80: possible = yes present = yes online = yes lock_token = 0x8000 (0x8) paca_index = 0x3 (0xa) kernel_toc = 0xc00000000144f990 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001032 (0x20) stab_real = 0x0 (0x28) stab_addr = 0x0 (0x30) emergency_sp = 0xc00000003ffe4000 (0x38) data_offset = 0xa40000 (0x40) hw_cpu_id = 0x9 (0x50) cpu_start = 0x1 (0x52) kexec_state = 0x0 (0x53) __current = 0xc00000007e568680 (0x218) kstack = 0xc00000007e5a3e30 (0x220) stab_rr = 0x1a (0x228) saved_r1 = 0xc00000007e7cb450 (0x230) trap_save = 0x0 (0x240) soft_enabled = 0x0 (0x242) irq_happened = 0x0 (0x243) io_sync = 0x0 (0x244) irq_work_pending = 0x0 (0x245) nap_state_lost = 0x0 (0x246) Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-14 03:01:31 +04:00
DUMP(p, data_offset, "lx");
DUMP(p, hw_cpu_id, "x");
DUMP(p, cpu_start, "x");
DUMP(p, kexec_state, "x");
powerpc/xmon: Add some more elements to the existing PACA dump list This patch adds a set of new elements to the existing PACA dump list inside an xmon session which can be listed below improving the overall xmon debug support. With this patch, a typical xmon PACA dump looks something like this. paca for cpu 0x0 @ c00000000fdc0000: possible = yes present = yes online = yes lock_token = 0x8000 (0xa) paca_index = 0x0 (0x8) kernel_toc = 0xc000000001393200 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001033 (0x20) emergency_sp = 0xc00000003fff0000 (0x28) mc_emergency_sp = 0xc00000003ffec000 (0x2e0) in_mce = 0x0 (0x2e8) hmi_event_available = 0x0 (0x2ea) data_offset = 0x1fe7b0000 (0x30) hw_cpu_id = 0x0 (0x38) cpu_start = 0x1 (0x3a) kexec_state = 0x0 (0x3b) slb_shadow[0]: = 0xc000000008000000 0x40016e7779000510 slb_shadow[1]: = 0xd000000008000001 0x400142add1000510 vmalloc_sllp = 0x510 (0x1b8) slb_cache_ptr = 0x4 (0x1ba) slb_cache[0]: = 0x000000000003f000 slb_cache[1]: = 0x0000000000000001 slb_cache[2]: = 0x0000000000000003 slb_cache[3]: = 0x0000000000001000 slb_cache[4]: = 0x0000000000001000 slb_cache[5]: = 0x0000000000000000 slb_cache[6]: = 0x0000000000000000 slb_cache[7]: = 0x0000000000000000 dscr_default = 0x0 (0x58) __current = 0xc000000001331e80 (0x290) kstack = 0xc000000001393e30 (0x298) stab_rr = 0x11 (0x2a0) saved_r1 = 0xc0000001fffef5e0 (0x2a8) trap_save = 0x0 (0x2b8) soft_enabled = 0x0 (0x2ba) irq_happened = 0x1 (0x2bb) io_sync = 0x0 (0x2bc) irq_work_pending = 0x0 (0x2bd) nap_state_lost = 0x0 (0x2be) sprg_vdso = 0x0 (0x2c0) tm_scratch = 0x8000000100009033 (0x2c8) core_idle_state_ptr = (null) (0x2d0) thread_idle_state = 0x0 (0x2d8) thread_mask = 0x0 (0x2d9) subcore_sibling_mask = 0x0 (0x2da) user_time = 0x0 (0x2f0) system_time = 0x0 (0x2f8) user_time_scaled = 0x0 (0x300) starttime = 0x3f462418b5cf4 (0x308) starttime_user = 0x3f4622a57092a (0x310) startspurr = 0xd62a5718 (0x318) utime_sspurr = 0x0 (0x320) stolen_time = 0x0 (0x328) Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> [mpe: Endian swap slb_shadow before display, minor formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-14 08:58:36 +03:00
#ifdef CONFIG_PPC_STD_MMU_64
for (i = 0; i < SLB_NUM_BOLTED; i++) {
u64 esid, vsid;
if (!p->slb_shadow_ptr)
continue;
esid = be64_to_cpu(p->slb_shadow_ptr->save_area[i].esid);
vsid = be64_to_cpu(p->slb_shadow_ptr->save_area[i].vsid);
if (esid || vsid) {
printf(" slb_shadow[%d]: = 0x%016lx 0x%016lx\n",
i, esid, vsid);
}
}
DUMP(p, vmalloc_sllp, "x");
DUMP(p, slb_cache_ptr, "x");
for (i = 0; i < SLB_CACHE_ENTRIES; i++)
printf(" slb_cache[%d]: = 0x%016lx\n", i, p->slb_cache[i]);
#endif
DUMP(p, dscr_default, "llx");
#ifdef CONFIG_PPC_BOOK3E
DUMP(p, pgd, "p");
DUMP(p, kernel_pgd, "p");
DUMP(p, tcd_ptr, "p");
DUMP(p, mc_kstack, "p");
DUMP(p, crit_kstack, "p");
DUMP(p, dbg_kstack, "p");
#endif
powerpc: Add an xmon command to dump one or all pacas This was originally motivated by a desire to see the mapping between logical and hardware cpu numbers. But it seemed that it made more sense to just add a command to dump (most of) the paca. With no arguments "dp" will dump the paca for the current cpu. It also takes an argument, eg. "dp 3" which is the logical cpu number in hex. This form does not check if the cpu is possible, but displays the paca regardless, as well as the cpu's state in the possible, present and online masks. Thirdly, "dpa" will display the paca for all possible cpus. If there are no possible cpus, like early in boot, it will tell you that. Sample output, number in brackets is the offset into the struct: 2:mon> dp 3 paca for cpu 0x3 @ c00000000ff20a80: possible = yes present = yes online = yes lock_token = 0x8000 (0x8) paca_index = 0x3 (0xa) kernel_toc = 0xc00000000144f990 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001032 (0x20) stab_real = 0x0 (0x28) stab_addr = 0x0 (0x30) emergency_sp = 0xc00000003ffe4000 (0x38) data_offset = 0xa40000 (0x40) hw_cpu_id = 0x9 (0x50) cpu_start = 0x1 (0x52) kexec_state = 0x0 (0x53) __current = 0xc00000007e568680 (0x218) kstack = 0xc00000007e5a3e30 (0x220) stab_rr = 0x1a (0x228) saved_r1 = 0xc00000007e7cb450 (0x230) trap_save = 0x0 (0x240) soft_enabled = 0x0 (0x242) irq_happened = 0x0 (0x243) io_sync = 0x0 (0x244) irq_work_pending = 0x0 (0x245) nap_state_lost = 0x0 (0x246) Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-14 03:01:31 +04:00
DUMP(p, __current, "p");
DUMP(p, kstack, "lx");
DUMP(p, stab_rr, "lx");
DUMP(p, saved_r1, "lx");
DUMP(p, trap_save, "x");
DUMP(p, soft_enabled, "x");
DUMP(p, irq_happened, "x");
DUMP(p, io_sync, "x");
DUMP(p, irq_work_pending, "x");
DUMP(p, nap_state_lost, "x");
powerpc/xmon: Add some more elements to the existing PACA dump list This patch adds a set of new elements to the existing PACA dump list inside an xmon session which can be listed below improving the overall xmon debug support. With this patch, a typical xmon PACA dump looks something like this. paca for cpu 0x0 @ c00000000fdc0000: possible = yes present = yes online = yes lock_token = 0x8000 (0xa) paca_index = 0x0 (0x8) kernel_toc = 0xc000000001393200 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001033 (0x20) emergency_sp = 0xc00000003fff0000 (0x28) mc_emergency_sp = 0xc00000003ffec000 (0x2e0) in_mce = 0x0 (0x2e8) hmi_event_available = 0x0 (0x2ea) data_offset = 0x1fe7b0000 (0x30) hw_cpu_id = 0x0 (0x38) cpu_start = 0x1 (0x3a) kexec_state = 0x0 (0x3b) slb_shadow[0]: = 0xc000000008000000 0x40016e7779000510 slb_shadow[1]: = 0xd000000008000001 0x400142add1000510 vmalloc_sllp = 0x510 (0x1b8) slb_cache_ptr = 0x4 (0x1ba) slb_cache[0]: = 0x000000000003f000 slb_cache[1]: = 0x0000000000000001 slb_cache[2]: = 0x0000000000000003 slb_cache[3]: = 0x0000000000001000 slb_cache[4]: = 0x0000000000001000 slb_cache[5]: = 0x0000000000000000 slb_cache[6]: = 0x0000000000000000 slb_cache[7]: = 0x0000000000000000 dscr_default = 0x0 (0x58) __current = 0xc000000001331e80 (0x290) kstack = 0xc000000001393e30 (0x298) stab_rr = 0x11 (0x2a0) saved_r1 = 0xc0000001fffef5e0 (0x2a8) trap_save = 0x0 (0x2b8) soft_enabled = 0x0 (0x2ba) irq_happened = 0x1 (0x2bb) io_sync = 0x0 (0x2bc) irq_work_pending = 0x0 (0x2bd) nap_state_lost = 0x0 (0x2be) sprg_vdso = 0x0 (0x2c0) tm_scratch = 0x8000000100009033 (0x2c8) core_idle_state_ptr = (null) (0x2d0) thread_idle_state = 0x0 (0x2d8) thread_mask = 0x0 (0x2d9) subcore_sibling_mask = 0x0 (0x2da) user_time = 0x0 (0x2f0) system_time = 0x0 (0x2f8) user_time_scaled = 0x0 (0x300) starttime = 0x3f462418b5cf4 (0x308) starttime_user = 0x3f4622a57092a (0x310) startspurr = 0xd62a5718 (0x318) utime_sspurr = 0x0 (0x320) stolen_time = 0x0 (0x328) Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> [mpe: Endian swap slb_shadow before display, minor formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-14 08:58:36 +03:00
DUMP(p, sprg_vdso, "llx");
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
DUMP(p, tm_scratch, "llx");
#endif
#ifdef CONFIG_PPC_POWERNV
DUMP(p, core_idle_state_ptr, "p");
DUMP(p, thread_idle_state, "x");
DUMP(p, thread_mask, "x");
DUMP(p, subcore_sibling_mask, "x");
#endif
powerpc: Add an xmon command to dump one or all pacas This was originally motivated by a desire to see the mapping between logical and hardware cpu numbers. But it seemed that it made more sense to just add a command to dump (most of) the paca. With no arguments "dp" will dump the paca for the current cpu. It also takes an argument, eg. "dp 3" which is the logical cpu number in hex. This form does not check if the cpu is possible, but displays the paca regardless, as well as the cpu's state in the possible, present and online masks. Thirdly, "dpa" will display the paca for all possible cpus. If there are no possible cpus, like early in boot, it will tell you that. Sample output, number in brackets is the offset into the struct: 2:mon> dp 3 paca for cpu 0x3 @ c00000000ff20a80: possible = yes present = yes online = yes lock_token = 0x8000 (0x8) paca_index = 0x3 (0xa) kernel_toc = 0xc00000000144f990 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001032 (0x20) stab_real = 0x0 (0x28) stab_addr = 0x0 (0x30) emergency_sp = 0xc00000003ffe4000 (0x38) data_offset = 0xa40000 (0x40) hw_cpu_id = 0x9 (0x50) cpu_start = 0x1 (0x52) kexec_state = 0x0 (0x53) __current = 0xc00000007e568680 (0x218) kstack = 0xc00000007e5a3e30 (0x220) stab_rr = 0x1a (0x228) saved_r1 = 0xc00000007e7cb450 (0x230) trap_save = 0x0 (0x240) soft_enabled = 0x0 (0x242) irq_happened = 0x0 (0x243) io_sync = 0x0 (0x244) irq_work_pending = 0x0 (0x245) nap_state_lost = 0x0 (0x246) Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-14 03:01:31 +04:00
powerpc/xmon: Add some more elements to the existing PACA dump list This patch adds a set of new elements to the existing PACA dump list inside an xmon session which can be listed below improving the overall xmon debug support. With this patch, a typical xmon PACA dump looks something like this. paca for cpu 0x0 @ c00000000fdc0000: possible = yes present = yes online = yes lock_token = 0x8000 (0xa) paca_index = 0x0 (0x8) kernel_toc = 0xc000000001393200 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001033 (0x20) emergency_sp = 0xc00000003fff0000 (0x28) mc_emergency_sp = 0xc00000003ffec000 (0x2e0) in_mce = 0x0 (0x2e8) hmi_event_available = 0x0 (0x2ea) data_offset = 0x1fe7b0000 (0x30) hw_cpu_id = 0x0 (0x38) cpu_start = 0x1 (0x3a) kexec_state = 0x0 (0x3b) slb_shadow[0]: = 0xc000000008000000 0x40016e7779000510 slb_shadow[1]: = 0xd000000008000001 0x400142add1000510 vmalloc_sllp = 0x510 (0x1b8) slb_cache_ptr = 0x4 (0x1ba) slb_cache[0]: = 0x000000000003f000 slb_cache[1]: = 0x0000000000000001 slb_cache[2]: = 0x0000000000000003 slb_cache[3]: = 0x0000000000001000 slb_cache[4]: = 0x0000000000001000 slb_cache[5]: = 0x0000000000000000 slb_cache[6]: = 0x0000000000000000 slb_cache[7]: = 0x0000000000000000 dscr_default = 0x0 (0x58) __current = 0xc000000001331e80 (0x290) kstack = 0xc000000001393e30 (0x298) stab_rr = 0x11 (0x2a0) saved_r1 = 0xc0000001fffef5e0 (0x2a8) trap_save = 0x0 (0x2b8) soft_enabled = 0x0 (0x2ba) irq_happened = 0x1 (0x2bb) io_sync = 0x0 (0x2bc) irq_work_pending = 0x0 (0x2bd) nap_state_lost = 0x0 (0x2be) sprg_vdso = 0x0 (0x2c0) tm_scratch = 0x8000000100009033 (0x2c8) core_idle_state_ptr = (null) (0x2d0) thread_idle_state = 0x0 (0x2d8) thread_mask = 0x0 (0x2d9) subcore_sibling_mask = 0x0 (0x2da) user_time = 0x0 (0x2f0) system_time = 0x0 (0x2f8) user_time_scaled = 0x0 (0x300) starttime = 0x3f462418b5cf4 (0x308) starttime_user = 0x3f4622a57092a (0x310) startspurr = 0xd62a5718 (0x318) utime_sspurr = 0x0 (0x320) stolen_time = 0x0 (0x328) Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com> [mpe: Endian swap slb_shadow before display, minor formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2015-10-14 08:58:36 +03:00
DUMP(p, user_time, "llx");
DUMP(p, system_time, "llx");
DUMP(p, user_time_scaled, "llx");
DUMP(p, starttime, "llx");
DUMP(p, starttime_user, "llx");
DUMP(p, startspurr, "llx");
DUMP(p, utime_sspurr, "llx");
DUMP(p, stolen_time, "llx");
powerpc: Add an xmon command to dump one or all pacas This was originally motivated by a desire to see the mapping between logical and hardware cpu numbers. But it seemed that it made more sense to just add a command to dump (most of) the paca. With no arguments "dp" will dump the paca for the current cpu. It also takes an argument, eg. "dp 3" which is the logical cpu number in hex. This form does not check if the cpu is possible, but displays the paca regardless, as well as the cpu's state in the possible, present and online masks. Thirdly, "dpa" will display the paca for all possible cpus. If there are no possible cpus, like early in boot, it will tell you that. Sample output, number in brackets is the offset into the struct: 2:mon> dp 3 paca for cpu 0x3 @ c00000000ff20a80: possible = yes present = yes online = yes lock_token = 0x8000 (0x8) paca_index = 0x3 (0xa) kernel_toc = 0xc00000000144f990 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001032 (0x20) stab_real = 0x0 (0x28) stab_addr = 0x0 (0x30) emergency_sp = 0xc00000003ffe4000 (0x38) data_offset = 0xa40000 (0x40) hw_cpu_id = 0x9 (0x50) cpu_start = 0x1 (0x52) kexec_state = 0x0 (0x53) __current = 0xc00000007e568680 (0x218) kstack = 0xc00000007e5a3e30 (0x220) stab_rr = 0x1a (0x228) saved_r1 = 0xc00000007e7cb450 (0x230) trap_save = 0x0 (0x240) soft_enabled = 0x0 (0x242) irq_happened = 0x0 (0x243) io_sync = 0x0 (0x244) irq_work_pending = 0x0 (0x245) nap_state_lost = 0x0 (0x246) Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-14 03:01:31 +04:00
#undef DUMP
catch_memory_errors = 0;
sync();
}
static void dump_all_pacas(void)
{
int cpu;
if (num_possible_cpus() == 0) {
printf("No possible cpus, use 'dp #' to dump individual cpus\n");
return;
}
for_each_possible_cpu(cpu)
dump_one_paca(cpu);
}
static void dump_pacas(void)
{
unsigned long num;
int c;
c = inchar();
if (c == 'a') {
dump_all_pacas();
return;
}
termch = c; /* Put c back, it wasn't 'a' */
if (scanhex(&num))
dump_one_paca(num);
else
dump_one_paca(xmon_owner);
}
#endif
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 08:27:16 +04:00
static void
dump(void)
{
int c;
c = inchar();
powerpc: Add an xmon command to dump one or all pacas This was originally motivated by a desire to see the mapping between logical and hardware cpu numbers. But it seemed that it made more sense to just add a command to dump (most of) the paca. With no arguments "dp" will dump the paca for the current cpu. It also takes an argument, eg. "dp 3" which is the logical cpu number in hex. This form does not check if the cpu is possible, but displays the paca regardless, as well as the cpu's state in the possible, present and online masks. Thirdly, "dpa" will display the paca for all possible cpus. If there are no possible cpus, like early in boot, it will tell you that. Sample output, number in brackets is the offset into the struct: 2:mon> dp 3 paca for cpu 0x3 @ c00000000ff20a80: possible = yes present = yes online = yes lock_token = 0x8000 (0x8) paca_index = 0x3 (0xa) kernel_toc = 0xc00000000144f990 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001032 (0x20) stab_real = 0x0 (0x28) stab_addr = 0x0 (0x30) emergency_sp = 0xc00000003ffe4000 (0x38) data_offset = 0xa40000 (0x40) hw_cpu_id = 0x9 (0x50) cpu_start = 0x1 (0x52) kexec_state = 0x0 (0x53) __current = 0xc00000007e568680 (0x218) kstack = 0xc00000007e5a3e30 (0x220) stab_rr = 0x1a (0x228) saved_r1 = 0xc00000007e7cb450 (0x230) trap_save = 0x0 (0x240) soft_enabled = 0x0 (0x242) irq_happened = 0x0 (0x243) io_sync = 0x0 (0x244) irq_work_pending = 0x0 (0x245) nap_state_lost = 0x0 (0x246) Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-14 03:01:31 +04:00
#ifdef CONFIG_PPC64
if (c == 'p') {
xmon_start_pagination();
powerpc: Add an xmon command to dump one or all pacas This was originally motivated by a desire to see the mapping between logical and hardware cpu numbers. But it seemed that it made more sense to just add a command to dump (most of) the paca. With no arguments "dp" will dump the paca for the current cpu. It also takes an argument, eg. "dp 3" which is the logical cpu number in hex. This form does not check if the cpu is possible, but displays the paca regardless, as well as the cpu's state in the possible, present and online masks. Thirdly, "dpa" will display the paca for all possible cpus. If there are no possible cpus, like early in boot, it will tell you that. Sample output, number in brackets is the offset into the struct: 2:mon> dp 3 paca for cpu 0x3 @ c00000000ff20a80: possible = yes present = yes online = yes lock_token = 0x8000 (0x8) paca_index = 0x3 (0xa) kernel_toc = 0xc00000000144f990 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001032 (0x20) stab_real = 0x0 (0x28) stab_addr = 0x0 (0x30) emergency_sp = 0xc00000003ffe4000 (0x38) data_offset = 0xa40000 (0x40) hw_cpu_id = 0x9 (0x50) cpu_start = 0x1 (0x52) kexec_state = 0x0 (0x53) __current = 0xc00000007e568680 (0x218) kstack = 0xc00000007e5a3e30 (0x220) stab_rr = 0x1a (0x228) saved_r1 = 0xc00000007e7cb450 (0x230) trap_save = 0x0 (0x240) soft_enabled = 0x0 (0x242) irq_happened = 0x0 (0x243) io_sync = 0x0 (0x244) irq_work_pending = 0x0 (0x245) nap_state_lost = 0x0 (0x246) Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-14 03:01:31 +04:00
dump_pacas();
xmon_end_pagination();
powerpc: Add an xmon command to dump one or all pacas This was originally motivated by a desire to see the mapping between logical and hardware cpu numbers. But it seemed that it made more sense to just add a command to dump (most of) the paca. With no arguments "dp" will dump the paca for the current cpu. It also takes an argument, eg. "dp 3" which is the logical cpu number in hex. This form does not check if the cpu is possible, but displays the paca regardless, as well as the cpu's state in the possible, present and online masks. Thirdly, "dpa" will display the paca for all possible cpus. If there are no possible cpus, like early in boot, it will tell you that. Sample output, number in brackets is the offset into the struct: 2:mon> dp 3 paca for cpu 0x3 @ c00000000ff20a80: possible = yes present = yes online = yes lock_token = 0x8000 (0x8) paca_index = 0x3 (0xa) kernel_toc = 0xc00000000144f990 (0x10) kernelbase = 0xc000000000000000 (0x18) kernel_msr = 0xb000000000001032 (0x20) stab_real = 0x0 (0x28) stab_addr = 0x0 (0x30) emergency_sp = 0xc00000003ffe4000 (0x38) data_offset = 0xa40000 (0x40) hw_cpu_id = 0x9 (0x50) cpu_start = 0x1 (0x52) kexec_state = 0x0 (0x53) __current = 0xc00000007e568680 (0x218) kstack = 0xc00000007e5a3e30 (0x220) stab_rr = 0x1a (0x228) saved_r1 = 0xc00000007e7cb450 (0x230) trap_save = 0x0 (0x240) soft_enabled = 0x0 (0x242) irq_happened = 0x0 (0x243) io_sync = 0x0 (0x244) irq_work_pending = 0x0 (0x245) nap_state_lost = 0x0 (0x246) Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-09-14 03:01:31 +04:00
return;
}
#endif
if ((isxdigit(c) && c != 'f' && c != 'd') || c == '\n')
termch = c;
scanhex((void *)&adrs);
if (termch != '\n')
termch = 0;
if (c == 'i') {
scanhex(&nidump);
if (nidump == 0)
nidump = 16;
else if (nidump > MAX_DUMP)
nidump = MAX_DUMP;
adrs += ppc_inst_dump(adrs, nidump, 1);
last_cmd = "di\n";
} else if (c == 'l') {
dump_log_buf();
} else if (c == 'o') {
dump_opal_msglog();
} else if (c == 'r') {
scanhex(&ndump);
if (ndump == 0)
ndump = 64;
xmon_rawdump(adrs, ndump);
adrs += ndump;
last_cmd = "dr\n";
} else {
scanhex(&ndump);
if (ndump == 0)
ndump = 64;
else if (ndump > MAX_DUMP)
ndump = MAX_DUMP;
prdump(adrs, ndump);
adrs += ndump;
last_cmd = "d\n";
}
}
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 08:27:16 +04:00
static void
prdump(unsigned long adrs, long ndump)
{
long n, m, c, r, nr;
unsigned char temp[16];
for (n = ndump; n > 0;) {
printf(REG, adrs);
putchar(' ');
r = n < 16? n: 16;
nr = mread(adrs, temp, r);
adrs += nr;
for (m = 0; m < r; ++m) {
if ((m & (sizeof(long) - 1)) == 0 && m > 0)
putchar(' ');
if (m < nr)
printf("%.2x", temp[m]);
else
printf("%s", fault_chars[fault_type]);
}
for (; m < 16; ++m) {
if ((m & (sizeof(long) - 1)) == 0)
putchar(' ');
printf(" ");
}
printf(" |");
for (m = 0; m < r; ++m) {
if (m < nr) {
c = temp[m];
putchar(' ' <= c && c <= '~'? c: '.');
} else
putchar(' ');
}
n -= r;
for (; m < 16; ++m)
putchar(' ');
printf("|\n");
if (nr < r)
break;
}
}
typedef int (*instruction_dump_func)(unsigned long inst, unsigned long addr);
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 08:27:16 +04:00
static int
generic_inst_dump(unsigned long adr, long count, int praddr,
instruction_dump_func dump_func)
{
int nr, dotted;
unsigned long first_adr;
unsigned long inst, last_inst = 0;
unsigned char val[4];
dotted = 0;
for (first_adr = adr; count > 0; --count, adr += 4) {
nr = mread(adr, val, 4);
if (nr == 0) {
if (praddr) {
const char *x = fault_chars[fault_type];
printf(REG" %s%s%s%s\n", adr, x, x, x, x);
}
break;
}
inst = GETWORD(val);
if (adr > first_adr && inst == last_inst) {
if (!dotted) {
printf(" ...\n");
dotted = 1;
}
continue;
}
dotted = 0;
last_inst = inst;
if (praddr)
printf(REG" %.8x", adr, inst);
printf("\t");
dump_func(inst, adr);
printf("\n");
}
return adr - first_adr;
}
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 08:27:16 +04:00
static int
ppc_inst_dump(unsigned long adr, long count, int praddr)
{
return generic_inst_dump(adr, count, praddr, print_insn_powerpc);
}
void
print_address(unsigned long addr)
{
xmon_print_symbol(addr, "\t# ", "");
}
void
dump_log_buf(void)
{
struct kmsg_dumper dumper = { .active = 1 };
unsigned char buf[128];
size_t len;
if (setjmp(bus_error_jmp) != 0) {
printf("Error dumping printk buffer!\n");
return;
}
catch_memory_errors = 1;
sync();
kmsg_dump_rewind_nolock(&dumper);
xmon_start_pagination();
while (kmsg_dump_get_line_nolock(&dumper, false, buf, sizeof(buf), &len)) {
buf[len] = '\0';
printf("%s", buf);
}
xmon_end_pagination();
sync();
/* wait a little while to see if we get a machine check */
__delay(200);
catch_memory_errors = 0;
}
#ifdef CONFIG_PPC_POWERNV
static void dump_opal_msglog(void)
{
unsigned char buf[128];
ssize_t res;
loff_t pos = 0;
if (!firmware_has_feature(FW_FEATURE_OPAL)) {
printf("Machine is not running OPAL firmware.\n");
return;
}
if (setjmp(bus_error_jmp) != 0) {
printf("Error dumping OPAL msglog!\n");
return;
}
catch_memory_errors = 1;
sync();
xmon_start_pagination();
while ((res = opal_msglog_copy(buf, pos, sizeof(buf) - 1))) {
if (res < 0) {
printf("Error dumping OPAL msglog! Error: %zd\n", res);
break;
}
buf[res] = '\0';
printf("%s", buf);
pos += res;
}
xmon_end_pagination();
sync();
/* wait a little while to see if we get a machine check */
__delay(200);
catch_memory_errors = 0;
}
#endif
/*
* Memory operations - move, set, print differences
*/
static unsigned long mdest; /* destination address */
static unsigned long msrc; /* source address */
static unsigned long mval; /* byte value to set memory to */
static unsigned long mcount; /* # bytes to affect */
static unsigned long mdiffs; /* max # differences to print */
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 08:27:16 +04:00
static void
memops(int cmd)
{
scanhex((void *)&mdest);
if( termch != '\n' )
termch = 0;
scanhex((void *)(cmd == 's'? &mval: &msrc));
if( termch != '\n' )
termch = 0;
scanhex((void *)&mcount);
switch( cmd ){
case 'm':
memmove((void *)mdest, (void *)msrc, mcount);
break;
case 's':
memset((void *)mdest, mval, mcount);
break;
case 'd':
if( termch != '\n' )
termch = 0;
scanhex((void *)&mdiffs);
memdiffs((unsigned char *)mdest, (unsigned char *)msrc, mcount, mdiffs);
break;
}
}
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 08:27:16 +04:00
static void
memdiffs(unsigned char *p1, unsigned char *p2, unsigned nb, unsigned maxpr)
{
unsigned n, prt;
prt = 0;
for( n = nb; n > 0; --n )
if( *p1++ != *p2++ )
if( ++prt <= maxpr )
printf("%.16x %.2x # %.16x %.2x\n", p1 - 1,
p1[-1], p2 - 1, p2[-1]);
if( prt > maxpr )
printf("Total of %d differences\n", prt);
}
static unsigned mend;
static unsigned mask;
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 08:27:16 +04:00
static void
memlocate(void)
{
unsigned a, n;
unsigned char val[4];
last_cmd = "ml";
scanhex((void *)&mdest);
if (termch != '\n') {
termch = 0;
scanhex((void *)&mend);
if (termch != '\n') {
termch = 0;
scanhex((void *)&mval);
mask = ~0;
if (termch != '\n') termch = 0;
scanhex((void *)&mask);
}
}
n = 0;
for (a = mdest; a < mend; a += 4) {
if (mread(a, val, 4) == 4
&& ((GETWORD(val) ^ mval) & mask) == 0) {
printf("%.16x: %.16x\n", a, GETWORD(val));
if (++n >= 10)
break;
}
}
}
static unsigned long mskip = 0x1000;
static unsigned long mlim = 0xffffffff;
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 08:27:16 +04:00
static void
memzcan(void)
{
unsigned char v;
unsigned a;
int ok, ook;
scanhex(&mdest);
if (termch != '\n') termch = 0;
scanhex(&mskip);
if (termch != '\n') termch = 0;
scanhex(&mlim);
ook = 0;
for (a = mdest; a < mlim; a += mskip) {
ok = mread(a, &v, 1);
if (ok && !ook) {
printf("%.8x .. ", a);
} else if (!ok && ook)
printf("%.8x\n", a - mskip);
ook = ok;
if (a + mskip < a)
break;
}
if (ook)
printf("%.8x\n", a - mskip);
}
static void show_task(struct task_struct *tsk)
{
char state;
/*
* Cloned from kdb_task_state_char(), which is not entirely
* appropriate for calling from xmon. This could be moved
* to a common, generic, routine used by both.
*/
state = (tsk->state == 0) ? 'R' :
(tsk->state < 0) ? 'U' :
(tsk->state & TASK_UNINTERRUPTIBLE) ? 'D' :
(tsk->state & TASK_STOPPED) ? 'T' :
(tsk->state & TASK_TRACED) ? 'C' :
(tsk->exit_state & EXIT_ZOMBIE) ? 'Z' :
(tsk->exit_state & EXIT_DEAD) ? 'E' :
(tsk->state & TASK_INTERRUPTIBLE) ? 'S' : '?';
printf("%p %016lx %6d %6d %c %2d %s\n", tsk,
tsk->thread.ksp,
tsk->pid, tsk->parent->pid,
state, task_thread_info(tsk)->cpu,
tsk->comm);
}
static void show_tasks(void)
{
unsigned long tskv;
struct task_struct *tsk = NULL;
printf(" task_struct ->thread.ksp PID PPID S P CMD\n");
if (scanhex(&tskv))
tsk = (struct task_struct *)tskv;
if (setjmp(bus_error_jmp) != 0) {
catch_memory_errors = 0;
printf("*** Error dumping task %p\n", tsk);
return;
}
catch_memory_errors = 1;
sync();
if (tsk)
show_task(tsk);
else
for_each_process(tsk)
show_task(tsk);
sync();
__delay(200);
catch_memory_errors = 0;
}
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 08:27:16 +04:00
static void proccall(void)
{
unsigned long args[8];
unsigned long ret;
int i;
typedef unsigned long (*callfunc_t)(unsigned long, unsigned long,
unsigned long, unsigned long, unsigned long,
unsigned long, unsigned long, unsigned long);
callfunc_t func;
if (!scanhex(&adrs))
return;
if (termch != '\n')
termch = 0;
for (i = 0; i < 8; ++i)
args[i] = 0;
for (i = 0; i < 8; ++i) {
if (!scanhex(&args[i]) || termch == '\n')
break;
termch = 0;
}
func = (callfunc_t) adrs;
ret = 0;
if (setjmp(bus_error_jmp) == 0) {
catch_memory_errors = 1;
sync();
ret = func(args[0], args[1], args[2], args[3],
args[4], args[5], args[6], args[7]);
sync();
printf("return value is 0x%lx\n", ret);
} else {
printf("*** %x exception occurred\n", fault_except);
}
catch_memory_errors = 0;
}
/* Input scanning routines */
int
skipbl(void)
{
int c;
if( termch != 0 ){
c = termch;
termch = 0;
} else
c = inchar();
while( c == ' ' || c == '\t' )
c = inchar();
return c;
}
#define N_PTREGS 44
static char *regnames[N_PTREGS] = {
"r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7",
"r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15",
"r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23",
"r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31",
"pc", "msr", "or3", "ctr", "lr", "xer", "ccr",
#ifdef CONFIG_PPC64
"softe",
#else
"mq",
#endif
"trap", "dar", "dsisr", "res"
};
int
scanhex(unsigned long *vp)
{
int c, d;
unsigned long v;
c = skipbl();
if (c == '%') {
/* parse register name */
char regname[8];
int i;
for (i = 0; i < sizeof(regname) - 1; ++i) {
c = inchar();
if (!isalnum(c)) {
termch = c;
break;
}
regname[i] = c;
}
regname[i] = 0;
for (i = 0; i < N_PTREGS; ++i) {
if (strcmp(regnames[i], regname) == 0) {
if (xmon_regs == NULL) {
printf("regs not available\n");
return 0;
}
*vp = ((unsigned long *)xmon_regs)[i];
return 1;
}
}
printf("invalid register name '%%%s'\n", regname);
return 0;
}
/* skip leading "0x" if any */
if (c == '0') {
c = inchar();
if (c == 'x') {
c = inchar();
} else {
d = hexdigit(c);
if (d == EOF) {
termch = c;
*vp = 0;
return 1;
}
}
} else if (c == '$') {
int i;
for (i=0; i<63; i++) {
c = inchar();
if (isspace(c) || c == '\0') {
termch = c;
break;
}
tmpstr[i] = c;
}
tmpstr[i++] = 0;
*vp = 0;
if (setjmp(bus_error_jmp) == 0) {
catch_memory_errors = 1;
sync();
*vp = kallsyms_lookup_name(tmpstr);
sync();
}
catch_memory_errors = 0;
if (!(*vp)) {
printf("unknown symbol '%s'\n", tmpstr);
return 0;
}
return 1;
}
d = hexdigit(c);
if (d == EOF) {
termch = c;
return 0;
}
v = 0;
do {
v = (v << 4) + d;
c = inchar();
d = hexdigit(c);
} while (d != EOF);
termch = c;
*vp = v;
return 1;
}
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 08:27:16 +04:00
static void
scannl(void)
{
int c;
c = termch;
termch = 0;
while( c != '\n' )
c = inchar();
}
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 08:27:16 +04:00
static int hexdigit(int c)
{
if( '0' <= c && c <= '9' )
return c - '0';
if( 'A' <= c && c <= 'F' )
return c - ('A' - 10);
if( 'a' <= c && c <= 'f' )
return c - ('a' - 10);
return EOF;
}
void
getstring(char *s, int size)
{
int c;
c = skipbl();
do {
if( size > 1 ){
*s++ = c;
--size;
}
c = inchar();
} while( c != ' ' && c != '\t' && c != '\n' );
termch = c;
*s = 0;
}
static char line[256];
static char *lineptr;
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 08:27:16 +04:00
static void
flush_input(void)
{
lineptr = NULL;
}
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 08:27:16 +04:00
static int
inchar(void)
{
if (lineptr == NULL || *lineptr == 0) {
if (xmon_gets(line, sizeof(line)) == NULL) {
lineptr = NULL;
return EOF;
}
lineptr = line;
}
return *lineptr++;
}
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 08:27:16 +04:00
static void
take_input(char *str)
{
lineptr = str;
}
static void
symbol_lookup(void)
{
int type = inchar();
unsigned long addr;
static char tmp[64];
switch (type) {
case 'a':
if (scanhex(&addr))
xmon_print_symbol(addr, ": ", "\n");
termch = 0;
break;
case 's':
getstring(tmp, 64);
if (setjmp(bus_error_jmp) == 0) {
catch_memory_errors = 1;
sync();
addr = kallsyms_lookup_name(tmp);
if (addr)
printf("%s: %lx\n", tmp, addr);
else
printf("Symbol '%s' not found.\n", tmp);
sync();
}
catch_memory_errors = 0;
termch = 0;
break;
}
}
/* Print an address in numeric and symbolic form (if possible) */
static void xmon_print_symbol(unsigned long address, const char *mid,
const char *after)
{
char *modname;
const char *name = NULL;
unsigned long offset, size;
printf(REG, address);
if (setjmp(bus_error_jmp) == 0) {
catch_memory_errors = 1;
sync();
name = kallsyms_lookup(address, &size, &offset, &modname,
tmpstr);
sync();
/* wait a little while to see if we get a machine check */
__delay(200);
}
catch_memory_errors = 0;
if (name) {
printf("%s%s+%#lx/%#lx", mid, name, offset, size);
if (modname)
printf(" [%s]", modname);
}
printf("%s", after);
}
#ifdef CONFIG_PPC_STD_MMU_64
void dump_segments(void)
{
int i;
unsigned long esid,vsid;
unsigned long llp;
printf("SLB contents of cpu 0x%x\n", smp_processor_id());
for (i = 0; i < mmu_slb_size; i++) {
asm volatile("slbmfee %0,%1" : "=r" (esid) : "r" (i));
asm volatile("slbmfev %0,%1" : "=r" (vsid) : "r" (i));
if (esid || vsid) {
printf("%02d %016lx %016lx", i, esid, vsid);
if (esid & SLB_ESID_V) {
llp = vsid & SLB_VSID_LLP;
if (vsid & SLB_VSID_B_1T) {
printf(" 1T ESID=%9lx VSID=%13lx LLP:%3lx \n",
GET_ESID_1T(esid),
(vsid & ~SLB_VSID_B) >> SLB_VSID_SHIFT_1T,
llp);
} else {
printf(" 256M ESID=%9lx VSID=%13lx LLP:%3lx \n",
GET_ESID(esid),
(vsid & ~SLB_VSID_B) >> SLB_VSID_SHIFT,
llp);
}
} else
printf("\n");
}
}
}
#endif
#ifdef CONFIG_PPC_STD_MMU_32
void dump_segments(void)
{
int i;
printf("sr0-15 =");
for (i = 0; i < 16; ++i)
printf(" %x", mfsrin(i));
printf("\n");
}
#endif
#ifdef CONFIG_44x
static void dump_tlb_44x(void)
{
int i;
for (i = 0; i < PPC44x_TLB_SIZE; i++) {
unsigned long w0,w1,w2;
asm volatile("tlbre %0,%1,0" : "=r" (w0) : "r" (i));
asm volatile("tlbre %0,%1,1" : "=r" (w1) : "r" (i));
asm volatile("tlbre %0,%1,2" : "=r" (w2) : "r" (i));
printf("[%02x] %08x %08x %08x ", i, w0, w1, w2);
if (w0 & PPC44x_TLB_VALID) {
printf("V %08x -> %01x%08x %c%c%c%c%c",
w0 & PPC44x_TLB_EPN_MASK,
w1 & PPC44x_TLB_ERPN_MASK,
w1 & PPC44x_TLB_RPN_MASK,
(w2 & PPC44x_TLB_W) ? 'W' : 'w',
(w2 & PPC44x_TLB_I) ? 'I' : 'i',
(w2 & PPC44x_TLB_M) ? 'M' : 'm',
(w2 & PPC44x_TLB_G) ? 'G' : 'g',
(w2 & PPC44x_TLB_E) ? 'E' : 'e');
}
printf("\n");
}
}
#endif /* CONFIG_44x */
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 08:27:16 +04:00
#ifdef CONFIG_PPC_BOOK3E
static void dump_tlb_book3e(void)
{
u32 mmucfg, pidmask, lpidmask;
u64 ramask;
int i, tlb, ntlbs, pidsz, lpidsz, rasz, lrat = 0;
int mmu_version;
static const char *pgsz_names[] = {
" 1K",
" 2K",
" 4K",
" 8K",
" 16K",
" 32K",
" 64K",
"128K",
"256K",
"512K",
" 1M",
" 2M",
" 4M",
" 8M",
" 16M",
" 32M",
" 64M",
"128M",
"256M",
"512M",
" 1G",
" 2G",
" 4G",
" 8G",
" 16G",
" 32G",
" 64G",
"128G",
"256G",
"512G",
" 1T",
" 2T",
};
/* Gather some infos about the MMU */
mmucfg = mfspr(SPRN_MMUCFG);
mmu_version = (mmucfg & 3) + 1;
ntlbs = ((mmucfg >> 2) & 3) + 1;
pidsz = ((mmucfg >> 6) & 0x1f) + 1;
lpidsz = (mmucfg >> 24) & 0xf;
rasz = (mmucfg >> 16) & 0x7f;
if ((mmu_version > 1) && (mmucfg & 0x10000))
lrat = 1;
printf("Book3E MMU MAV=%d.0,%d TLBs,%d-bit PID,%d-bit LPID,%d-bit RA\n",
mmu_version, ntlbs, pidsz, lpidsz, rasz);
pidmask = (1ul << pidsz) - 1;
lpidmask = (1ul << lpidsz) - 1;
ramask = (1ull << rasz) - 1;
for (tlb = 0; tlb < ntlbs; tlb++) {
u32 tlbcfg;
int nent, assoc, new_cc = 1;
printf("TLB %d:\n------\n", tlb);
switch(tlb) {
case 0:
tlbcfg = mfspr(SPRN_TLB0CFG);
break;
case 1:
tlbcfg = mfspr(SPRN_TLB1CFG);
break;
case 2:
tlbcfg = mfspr(SPRN_TLB2CFG);
break;
case 3:
tlbcfg = mfspr(SPRN_TLB3CFG);
break;
default:
printf("Unsupported TLB number !\n");
continue;
}
nent = tlbcfg & 0xfff;
assoc = (tlbcfg >> 24) & 0xff;
for (i = 0; i < nent; i++) {
u32 mas0 = MAS0_TLBSEL(tlb);
u32 mas1 = MAS1_TSIZE(BOOK3E_PAGESZ_4K);
u64 mas2 = 0;
u64 mas7_mas3;
int esel = i, cc = i;
if (assoc != 0) {
cc = i / assoc;
esel = i % assoc;
mas2 = cc * 0x1000;
}
mas0 |= MAS0_ESEL(esel);
mtspr(SPRN_MAS0, mas0);
mtspr(SPRN_MAS1, mas1);
mtspr(SPRN_MAS2, mas2);
asm volatile("tlbre 0,0,0" : : : "memory");
mas1 = mfspr(SPRN_MAS1);
mas2 = mfspr(SPRN_MAS2);
mas7_mas3 = mfspr(SPRN_MAS7_MAS3);
if (assoc && (i % assoc) == 0)
new_cc = 1;
if (!(mas1 & MAS1_VALID))
continue;
if (assoc == 0)
printf("%04x- ", i);
else if (new_cc)
printf("%04x-%c", cc, 'A' + esel);
else
printf(" |%c", 'A' + esel);
new_cc = 0;
printf(" %016llx %04x %s %c%c AS%c",
mas2 & ~0x3ffull,
(mas1 >> 16) & 0x3fff,
pgsz_names[(mas1 >> 7) & 0x1f],
mas1 & MAS1_IND ? 'I' : ' ',
mas1 & MAS1_IPROT ? 'P' : ' ',
mas1 & MAS1_TS ? '1' : '0');
printf(" %c%c%c%c%c%c%c",
mas2 & MAS2_X0 ? 'a' : ' ',
mas2 & MAS2_X1 ? 'v' : ' ',
mas2 & MAS2_W ? 'w' : ' ',
mas2 & MAS2_I ? 'i' : ' ',
mas2 & MAS2_M ? 'm' : ' ',
mas2 & MAS2_G ? 'g' : ' ',
mas2 & MAS2_E ? 'e' : ' ');
printf(" %016llx", mas7_mas3 & ramask & ~0x7ffull);
if (mas1 & MAS1_IND)
printf(" %s\n",
pgsz_names[(mas7_mas3 >> 1) & 0x1f]);
else
printf(" U%c%c%c S%c%c%c\n",
mas7_mas3 & MAS3_UX ? 'x' : ' ',
mas7_mas3 & MAS3_UW ? 'w' : ' ',
mas7_mas3 & MAS3_UR ? 'r' : ' ',
mas7_mas3 & MAS3_SX ? 'x' : ' ',
mas7_mas3 & MAS3_SW ? 'w' : ' ',
mas7_mas3 & MAS3_SR ? 'r' : ' ');
}
}
}
#endif /* CONFIG_PPC_BOOK3E */
[POWERPC] Fix sparse warnings in xmon.c warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-05-08 08:27:16 +04:00
static void xmon_init(int enable)
{
if (enable) {
__debugger = xmon;
__debugger_ipi = xmon_ipi;
__debugger_bpt = xmon_bpt;
__debugger_sstep = xmon_sstep;
__debugger_iabr_match = xmon_iabr_match;
__debugger_break_match = xmon_break_match;
__debugger_fault_handler = xmon_fault_handler;
} else {
__debugger = NULL;
__debugger_ipi = NULL;
__debugger_bpt = NULL;
__debugger_sstep = NULL;
__debugger_iabr_match = NULL;
__debugger_break_match = NULL;
__debugger_fault_handler = NULL;
}
}
#ifdef CONFIG_MAGIC_SYSRQ
static void sysrq_handle_xmon(int key)
{
/* ensure xmon is enabled */
xmon_init(1);
IRQ: Maintain regs pointer globally rather than passing to IRQ handlers Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 17:55:46 +04:00
debugger(get_irq_regs());
}
static struct sysrq_key_op sysrq_xmon_op = {
.handler = sysrq_handle_xmon,
.help_msg = "xmon(x)",
.action_msg = "Entering xmon",
};
static int __init setup_xmon_sysrq(void)
{
register_sysrq_key('x', &sysrq_xmon_op);
return 0;
}
__initcall(setup_xmon_sysrq);
#endif /* CONFIG_MAGIC_SYSRQ */
static int __initdata xmon_early, xmon_off;
static int __init early_parse_xmon(char *p)
{
if (!p || strncmp(p, "early", 5) == 0) {
/* just "xmon" is equivalent to "xmon=early" */
xmon_init(1);
xmon_early = 1;
} else if (strncmp(p, "on", 2) == 0)
xmon_init(1);
else if (strncmp(p, "off", 3) == 0)
xmon_off = 1;
else if (strncmp(p, "nobt", 4) == 0)
xmon_no_auto_backtrace = 1;
else
return 1;
return 0;
}
early_param("xmon", early_parse_xmon);
void __init xmon_setup(void)
{
#ifdef CONFIG_XMON_DEFAULT
if (!xmon_off)
xmon_init(1);
#endif
if (xmon_early)
debugger(NULL);
}
#ifdef CONFIG_SPU_BASE
struct spu_info {
struct spu *spu;
u64 saved_mfc_sr1_RW;
u32 saved_spu_runcntl_RW;
unsigned long dump_addr;
u8 stopped_ok;
};
#define XMON_NUM_SPUS 16 /* Enough for current hardware */
static struct spu_info spu_info[XMON_NUM_SPUS];
void xmon_register_spus(struct list_head *list)
{
struct spu *spu;
list_for_each_entry(spu, list, full_list) {
if (spu->number >= XMON_NUM_SPUS) {
WARN_ON(1);
continue;
}
spu_info[spu->number].spu = spu;
spu_info[spu->number].stopped_ok = 0;
spu_info[spu->number].dump_addr = (unsigned long)
spu_info[spu->number].spu->local_store;
}
}
static void stop_spus(void)
{
struct spu *spu;
int i;
u64 tmp;
for (i = 0; i < XMON_NUM_SPUS; i++) {
if (!spu_info[i].spu)
continue;
if (setjmp(bus_error_jmp) == 0) {
catch_memory_errors = 1;
sync();
spu = spu_info[i].spu;
spu_info[i].saved_spu_runcntl_RW =
in_be32(&spu->problem->spu_runcntl_RW);
tmp = spu_mfc_sr1_get(spu);
spu_info[i].saved_mfc_sr1_RW = tmp;
tmp &= ~MFC_STATE1_MASTER_RUN_CONTROL_MASK;
spu_mfc_sr1_set(spu, tmp);
sync();
__delay(200);
spu_info[i].stopped_ok = 1;
printf("Stopped spu %.2d (was %s)\n", i,
spu_info[i].saved_spu_runcntl_RW ?
"running" : "stopped");
} else {
catch_memory_errors = 0;
printf("*** Error stopping spu %.2d\n", i);
}
catch_memory_errors = 0;
}
}
static void restart_spus(void)
{
struct spu *spu;
int i;
for (i = 0; i < XMON_NUM_SPUS; i++) {
if (!spu_info[i].spu)
continue;
if (!spu_info[i].stopped_ok) {
printf("*** Error, spu %d was not successfully stopped"
", not restarting\n", i);
continue;
}
if (setjmp(bus_error_jmp) == 0) {
catch_memory_errors = 1;
sync();
spu = spu_info[i].spu;
spu_mfc_sr1_set(spu, spu_info[i].saved_mfc_sr1_RW);
out_be32(&spu->problem->spu_runcntl_RW,
spu_info[i].saved_spu_runcntl_RW);
sync();
__delay(200);
printf("Restarted spu %.2d\n", i);
} else {
catch_memory_errors = 0;
printf("*** Error restarting spu %.2d\n", i);
}
catch_memory_errors = 0;
}
}
#define DUMP_WIDTH 23
#define DUMP_VALUE(format, field, value) \
do { \
if (setjmp(bus_error_jmp) == 0) { \
catch_memory_errors = 1; \
sync(); \
printf(" %-*s = "format"\n", DUMP_WIDTH, \
#field, value); \
sync(); \
__delay(200); \
} else { \
catch_memory_errors = 0; \
printf(" %-*s = *** Error reading field.\n", \
DUMP_WIDTH, #field); \
} \
catch_memory_errors = 0; \
} while (0)
#define DUMP_FIELD(obj, format, field) \
DUMP_VALUE(format, field, obj->field)
static void dump_spu_fields(struct spu *spu)
{
printf("Dumping spu fields at address %p:\n", spu);
DUMP_FIELD(spu, "0x%x", number);
DUMP_FIELD(spu, "%s", name);
DUMP_FIELD(spu, "0x%lx", local_store_phys);
DUMP_FIELD(spu, "0x%p", local_store);
DUMP_FIELD(spu, "0x%lx", ls_size);
DUMP_FIELD(spu, "0x%x", node);
DUMP_FIELD(spu, "0x%lx", flags);
DUMP_FIELD(spu, "%d", class_0_pending);
DUMP_FIELD(spu, "0x%lx", class_0_dar);
DUMP_FIELD(spu, "0x%lx", class_1_dar);
DUMP_FIELD(spu, "0x%lx", class_1_dsisr);
DUMP_FIELD(spu, "0x%lx", irqs[0]);
DUMP_FIELD(spu, "0x%lx", irqs[1]);
DUMP_FIELD(spu, "0x%lx", irqs[2]);
DUMP_FIELD(spu, "0x%x", slb_replace);
DUMP_FIELD(spu, "%d", pid);
DUMP_FIELD(spu, "0x%p", mm);
DUMP_FIELD(spu, "0x%p", ctx);
DUMP_FIELD(spu, "0x%p", rq);
DUMP_FIELD(spu, "0x%p", timestamp);
DUMP_FIELD(spu, "0x%lx", problem_phys);
DUMP_FIELD(spu, "0x%p", problem);
DUMP_VALUE("0x%x", problem->spu_runcntl_RW,
in_be32(&spu->problem->spu_runcntl_RW));
DUMP_VALUE("0x%x", problem->spu_status_R,
in_be32(&spu->problem->spu_status_R));
DUMP_VALUE("0x%x", problem->spu_npc_RW,
in_be32(&spu->problem->spu_npc_RW));
DUMP_FIELD(spu, "0x%p", priv2);
DUMP_FIELD(spu, "0x%p", pdata);
}
int
spu_inst_dump(unsigned long adr, long count, int praddr)
{
return generic_inst_dump(adr, count, praddr, print_insn_spu);
}
static void dump_spu_ls(unsigned long num, int subcmd)
{
unsigned long offset, addr, ls_addr;
if (setjmp(bus_error_jmp) == 0) {
catch_memory_errors = 1;
sync();
ls_addr = (unsigned long)spu_info[num].spu->local_store;
sync();
__delay(200);
} else {
catch_memory_errors = 0;
printf("*** Error: accessing spu info for spu %d\n", num);
return;
}
catch_memory_errors = 0;
if (scanhex(&offset))
addr = ls_addr + offset;
else
addr = spu_info[num].dump_addr;
if (addr >= ls_addr + LS_SIZE) {
printf("*** Error: address outside of local store\n");
return;
}
switch (subcmd) {
case 'i':
addr += spu_inst_dump(addr, 16, 1);
last_cmd = "sdi\n";
break;
default:
prdump(addr, 64);
addr += 64;
last_cmd = "sd\n";
break;
}
spu_info[num].dump_addr = addr;
}
static int do_spu_cmd(void)
{
static unsigned long num = 0;
int cmd, subcmd = 0;
cmd = inchar();
switch (cmd) {
case 's':
stop_spus();
break;
case 'r':
restart_spus();
break;
case 'd':
subcmd = inchar();
if (isxdigit(subcmd) || subcmd == '\n')
termch = subcmd;
case 'f':
scanhex(&num);
if (num >= XMON_NUM_SPUS || !spu_info[num].spu) {
printf("*** Error: invalid spu number\n");
return 0;
}
switch (cmd) {
case 'f':
dump_spu_fields(spu_info[num].spu);
break;
default:
dump_spu_ls(num, subcmd);
break;
}
break;
default:
return -1;
}
return 0;
}
#else /* ! CONFIG_SPU_BASE */
static int do_spu_cmd(void)
{
return -1;
}
#endif