microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/fs/xfs/xfs_iops.h

28 строки
832 B
C
Исходник Обычный вид История

xfs: convert to SPDX license tags Remove the verbose license text from XFS files and replace them with SPDX tags. This does not change the license of any of the code, merely refers to the common, up-to-date license files in LICENSES/ This change was mostly scripted. fs/xfs/Makefile and fs/xfs/libxfs/xfs_fs.h were modified by hand, the rest were detected and modified by the following command: for f in `git grep -l "GNU General" fs/xfs/` ; do echo $f cat $f | awk -f hdr.awk > $f.new mv -f $f.new $f done And the hdr.awk script that did the modification (including detecting the difference between GPL-2.0 and GPL-2.0+ licenses) is as follows: $ cat hdr.awk BEGIN { hdr = 1.0 tag = "GPL-2.0" str = "" } /^ \* This program is free software/ { hdr = 2.0; next } /any later version./ { tag = "GPL-2.0+" next } /^ \*\// { if (hdr > 0.0) { print "// SPDX-License-Identifier: " tag print str print $0 str="" hdr = 0.0 next } print $0 next } /^ \* / { if (hdr > 1.0) next if (hdr > 0.0) { if (str != "") str = str "\n" str = str $0 next } print $0 next } /^ \*/ { if (hdr > 0.0) next print $0 next } // { if (hdr > 0.0) { if (str != "") str = str "\n" str = str $0 next } print $0 } END { } $ Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-06 05:42:14 +03:00
// SPDX-License-Identifier: GPL-2.0
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
/*
[XFS] Update license/copyright notices to match the prefered SGI boilerplate. SGI-PV: 913862 SGI-Modid: xfs-linux:xfs-kern:23903a Signed-off-by: Nathan Scott <nathans@sgi.com>
2005-11-02 06:58:39 +03:00
* Copyright (c) 2000-2003,2005 Silicon Graphics, Inc.
* All Rights Reserved.
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
*/
#ifndef __XFS_IOPS_H__
#define __XFS_IOPS_H__
[XFS] sanitize xfs_initialize_vnode Sanitize setting up the Linux indode. Setting up the xfs_inode <-> inode link is opencoded in xfs_iget_core now because that's the only place it needs to be done, xfs_initialize_vnode is renamed to xfs_setup_inode and loses all superflous paramaters. The check for I_NEW is removed because it always is true and the di_mode check moves into xfs_iget_core because it's only needed there. xfs_set_inodeops and xfs_revalidate_inode are merged into xfs_setup_inode and the whole things is moved into xfs_iops.c where it belongs. SGI-PV: 981498 SGI-Modid: xfs-linux-melb:xfs-kern:31782a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Niv Sardi <xaiki@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-08-13 10:23:13 +04:00
struct xfs_inode;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
[PATCH] Make most file operations structs in fs/ const This is a conversion to make the various file_operations structs in fs/ const. Basically a regexp job, with a few manual fixups The goal is both to increase correctness (harder to accidentally write to shared datastructures) and reducing the false sharing of cachelines with things that get dirty in .data (while .rodata is nicely read only and thus cache clean) Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-28 13:56:42 +04:00
extern const struct file_operations xfs_file_operations;
extern const struct file_operations xfs_dir_file_operations;
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
[XFS] Use the generic xattr methods. Use the generic set, get and removexattr methods and supply the s_xattr array with fine-grained handlers. All XFS/Linux highlevel attr handling is rewritten from scratch and placed into fs/xfs/linux-2.6/xfs_xattr.c so that it's separated from the generic low-level code. SGI-PV: 982343 SGI-Modid: xfs-linux-melb:xfs-kern:31234a Signed-off-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Tim Shimmin <tes@sgi.com> Signed-off-by: Lachlan McIlroy <lachlan@sgi.com>
2008-06-23 07:23:01 +04:00
extern ssize_t xfs_vn_listxattr(struct dentry *, char *data, size_t size);
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
xfs: kill xfs_vnodeops.[ch] Now we have xfs_inode.c for holding kernel-only XFS inode operations, move all the inode operations from xfs_vnodeops.c to this new file as it holds another set of kernel-only inode operations. The name of this file traces back to the days of Irix and it's vnodes which we don't have anymore. Essentially this move consolidates the inode locking functions and a bunch of XFS inode operations into the one file. Eventually the high level functions will be merged into the VFS interface functions in xfs_iops.c. This leaves only internal preallocation, EOF block manipulation and hole punching functions in vnodeops.c. Move these to xfs_bmap_util.c where we are already consolidating various in-kernel physical extent manipulation and querying functions. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-12 14:49:45 +04:00
/*
* Internal setattr interfaces.
*/
xfs: use generic posix ACL infrastructure Also don't bother to set up a .get_acl method for symlinks as we do not support access control (ACLs or even mode bits) for symlinks in Linux, and create inodes with the proper mode instead of fixing it up later. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-12-20 17:16:50 +04:00
#define XFS_ATTR_NOACL 0x01 /* Don't call posix_acl_chmod */
xfs: kill xfs_vnodeops.[ch] Now we have xfs_inode.c for holding kernel-only XFS inode operations, move all the inode operations from xfs_vnodeops.c to this new file as it holds another set of kernel-only inode operations. The name of this file traces back to the days of Irix and it's vnodes which we don't have anymore. Essentially this move consolidates the inode locking functions and a bunch of XFS inode operations into the one file. Eventually the high level functions will be merged into the VFS interface functions in xfs_iops.c. This leaves only internal preallocation, EOF block manipulation and hole punching functions in vnodeops.c. Move these to xfs_bmap_util.c where we are already consolidating various in-kernel physical extent manipulation and querying functions. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-12 14:49:45 +04:00
xfs: implement pNFS export operations Add operations to export pNFS block layouts from an XFS filesystem. See the previous commit adding the operations for an explanation of them. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <dchinner@redhat.com> Signed-off-by: Dave Chinner <david@fromorbit.com>
2015-02-16 03:49:23 +03:00
extern void xfs_setattr_time(struct xfs_inode *ip, struct iattr *iattr);
xfs: kill xfs_vnodeops.[ch] Now we have xfs_inode.c for holding kernel-only XFS inode operations, move all the inode operations from xfs_vnodeops.c to this new file as it holds another set of kernel-only inode operations. The name of this file traces back to the days of Irix and it's vnodes which we don't have anymore. Essentially this move consolidates the inode locking functions and a bunch of XFS inode operations into the one file. Eventually the high level functions will be merged into the VFS interface functions in xfs_iops.c. This leaves only internal preallocation, EOF block manipulation and hole punching functions in vnodeops.c. Move these to xfs_bmap_util.c where we are already consolidating various in-kernel physical extent manipulation and querying functions. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-12 14:49:45 +04:00
extern int xfs_setattr_nonsize(struct xfs_inode *ip, struct iattr *vap,
int flags);
xfs: Propagate dentry down to inode_change_ok() To avoid clearing of capabilities or security related extended attributes too early, inode_change_ok() will need to take dentry instead of inode. Propagate dentry down to functions calling inode_change_ok(). This is rather straightforward except for xfs_set_mode() function which does not have dentry easily available. Luckily that function does not call inode_change_ok() anyway so we just have to do a little dance with function prototypes. Acked-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jan Kara <jack@suse.cz>
2016-05-26 15:46:43 +03:00
extern int xfs_vn_setattr_nonsize(struct dentry *dentry, struct iattr *vap);
extern int xfs_vn_setattr_size(struct dentry *dentry, struct iattr *vap);
xfs: kill xfs_vnodeops.[ch] Now we have xfs_inode.c for holding kernel-only XFS inode operations, move all the inode operations from xfs_vnodeops.c to this new file as it holds another set of kernel-only inode operations. The name of this file traces back to the days of Irix and it's vnodes which we don't have anymore. Essentially this move consolidates the inode locking functions and a bunch of XFS inode operations into the one file. Eventually the high level functions will be merged into the VFS interface functions in xfs_iops.c. This leaves only internal preallocation, EOF block manipulation and hole punching functions in vnodeops.c. Move these to xfs_bmap_util.c where we are already consolidating various in-kernel physical extent manipulation and querying functions. Signed-off-by: Dave Chinner <dchinner@redhat.com> Reviewed-by: Mark Tinguely <tinguely@sgi.com> Signed-off-by: Ben Myers <bpm@sgi.com>
2013-08-12 14:49:45 +04:00
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
2005-04-17 02:20:36 +04:00
#endif /* __XFS_IOPS_H__ */