WSL2-Linux-Kernel/kernel/irq/affinity.c

240 строки
5.9 KiB
C
Исходник Обычный вид История

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 17:07:57 +03:00
// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2016 Thomas Gleixner.
* Copyright (C) 2016-2017 Christoph Hellwig.
*/
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/cpu.h>
static void irq_spread_init_one(struct cpumask *irqmsk, struct cpumask *nmsk,
int cpus_per_vec)
{
const struct cpumask *siblmsk;
int cpu, sibl;
for ( ; cpus_per_vec > 0; ) {
cpu = cpumask_first(nmsk);
/* Should not happen, but I'm too lazy to think about it */
if (cpu >= nr_cpu_ids)
return;
cpumask_clear_cpu(cpu, nmsk);
cpumask_set_cpu(cpu, irqmsk);
cpus_per_vec--;
/* If the cpu has siblings, use them first */
siblmsk = topology_sibling_cpumask(cpu);
for (sibl = -1; cpus_per_vec > 0; ) {
sibl = cpumask_next(sibl, siblmsk);
if (sibl >= nr_cpu_ids)
break;
if (!cpumask_test_and_clear_cpu(sibl, nmsk))
continue;
cpumask_set_cpu(sibl, irqmsk);
cpus_per_vec--;
}
}
}
static cpumask_var_t *alloc_node_to_cpumask(void)
{
cpumask_var_t *masks;
int node;
masks = kcalloc(nr_node_ids, sizeof(cpumask_var_t), GFP_KERNEL);
if (!masks)
return NULL;
for (node = 0; node < nr_node_ids; node++) {
if (!zalloc_cpumask_var(&masks[node], GFP_KERNEL))
goto out_unwind;
}
return masks;
out_unwind:
while (--node >= 0)
free_cpumask_var(masks[node]);
kfree(masks);
return NULL;
}
static void free_node_to_cpumask(cpumask_var_t *masks)
{
int node;
for (node = 0; node < nr_node_ids; node++)
free_cpumask_var(masks[node]);
kfree(masks);
}
static void build_node_to_cpumask(cpumask_var_t *masks)
{
int cpu;
for_each_possible_cpu(cpu)
cpumask_set_cpu(cpu, masks[cpu_to_node(cpu)]);
}
static int get_nodes_in_cpumask(cpumask_var_t *node_to_cpumask,
const struct cpumask *mask, nodemask_t *nodemsk)
{
genirq/affinity: Fix node generation from cpumask Commit 34c3d9819fda ("genirq/affinity: Provide smarter irq spreading infrastructure") introduced a better IRQ spreading mechanism, taking account of the available NUMA nodes in the machine. Problem is that the algorithm of retrieving the nodemask iterates "linearly" based on the number of online nodes - some architectures present non-linear node distribution among the nodemask, like PowerPC. If this is the case, the algorithm lead to a wrong node count number and therefore to a bad/incomplete IRQ affinity distribution. For example, this problem were found in a machine with 128 CPUs and two nodes, namely nodes 0 and 8 (instead of 0 and 1, if it was linearly distributed). This led to a wrong affinity distribution which then led to a bad mq allocation for nvme driver. Finally, we take the opportunity to fix a comment regarding the affinity distribution when we have _more_ nodes than vectors. Fixes: 34c3d9819fda ("genirq/affinity: Provide smarter irq spreading infrastructure") Reported-by: Gabriel Krisman Bertazi <gabriel@krisman.be> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Gabriel Krisman Bertazi <gabriel@krisman.be> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Cc: linux-pci@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: hch@lst.de Link: http://lkml.kernel.org/r/1481738472-2671-1-git-send-email-gpiccoli@linux.vnet.ibm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-14 21:01:12 +03:00
int n, nodes = 0;
/* Calculate the number of nodes in the supplied affinity mask */
for_each_node(n) {
if (cpumask_intersects(mask, node_to_cpumask[n])) {
node_set(n, *nodemsk);
nodes++;
}
}
return nodes;
}
static int irq_build_affinity_masks(const struct irq_affinity *affd,
int startvec, int numvecs,
cpumask_var_t *node_to_cpumask,
const struct cpumask *cpu_mask,
struct cpumask *nmsk,
struct cpumask *masks)
{
int n, nodes, cpus_per_vec, extra_vecs, done = 0;
int last_affv = affd->pre_vectors + numvecs;
int curvec = startvec;
nodemask_t nodemsk = NODE_MASK_NONE;
nodes = get_nodes_in_cpumask(node_to_cpumask, cpu_mask, &nodemsk);
/*
genirq/affinity: Fix node generation from cpumask Commit 34c3d9819fda ("genirq/affinity: Provide smarter irq spreading infrastructure") introduced a better IRQ spreading mechanism, taking account of the available NUMA nodes in the machine. Problem is that the algorithm of retrieving the nodemask iterates "linearly" based on the number of online nodes - some architectures present non-linear node distribution among the nodemask, like PowerPC. If this is the case, the algorithm lead to a wrong node count number and therefore to a bad/incomplete IRQ affinity distribution. For example, this problem were found in a machine with 128 CPUs and two nodes, namely nodes 0 and 8 (instead of 0 and 1, if it was linearly distributed). This led to a wrong affinity distribution which then led to a bad mq allocation for nvme driver. Finally, we take the opportunity to fix a comment regarding the affinity distribution when we have _more_ nodes than vectors. Fixes: 34c3d9819fda ("genirq/affinity: Provide smarter irq spreading infrastructure") Reported-by: Gabriel Krisman Bertazi <gabriel@krisman.be> Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Gabriel Krisman Bertazi <gabriel@krisman.be> Reviewed-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Cc: linux-pci@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: hch@lst.de Link: http://lkml.kernel.org/r/1481738472-2671-1-git-send-email-gpiccoli@linux.vnet.ibm.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-12-14 21:01:12 +03:00
* If the number of nodes in the mask is greater than or equal the
* number of vectors we just spread the vectors across the nodes.
*/
if (numvecs <= nodes) {
for_each_node_mask(n, nodemsk) {
cpumask_copy(masks + curvec, node_to_cpumask[n]);
if (++done == numvecs)
break;
if (++curvec == last_affv)
curvec = affd->pre_vectors;
}
goto out;
}
for_each_node_mask(n, nodemsk) {
int ncpus, v, vecs_to_assign, vecs_per_node;
/* Spread the vectors per node */
vecs_per_node = (numvecs - (curvec - affd->pre_vectors)) / nodes;
/* Get the cpus on this node which are in the mask */
cpumask_and(nmsk, cpu_mask, node_to_cpumask[n]);
/* Calculate the number of cpus per vector */
ncpus = cpumask_weight(nmsk);
vecs_to_assign = min(vecs_per_node, ncpus);
/* Account for rounding errors */
extra_vecs = ncpus - vecs_to_assign * (ncpus / vecs_to_assign);
for (v = 0; curvec < last_affv && v < vecs_to_assign;
curvec++, v++) {
cpus_per_vec = ncpus / vecs_to_assign;
/* Account for extra vectors to compensate rounding errors */
if (extra_vecs) {
cpus_per_vec++;
--extra_vecs;
}
irq_spread_init_one(masks + curvec, nmsk, cpus_per_vec);
}
done += v;
if (done >= numvecs)
break;
if (curvec >= last_affv)
curvec = affd->pre_vectors;
--nodes;
}
out:
return done;
}
/**
* irq_create_affinity_masks - Create affinity masks for multiqueue spreading
* @nvecs: The total number of vectors
* @affd: Description of the affinity requirements
*
* Returns the masks pointer or NULL if allocation failed.
*/
struct cpumask *
irq_create_affinity_masks(int nvecs, const struct irq_affinity *affd)
{
int curvec, affvecs = nvecs - affd->pre_vectors - affd->post_vectors;
cpumask_var_t nmsk, *node_to_cpumask;
struct cpumask *masks = NULL;
/*
* If there aren't any vectors left after applying the pre/post
* vectors don't bother with assigning affinity.
*/
if (nvecs == affd->pre_vectors + affd->post_vectors)
return NULL;
if (!zalloc_cpumask_var(&nmsk, GFP_KERNEL))
return NULL;
node_to_cpumask = alloc_node_to_cpumask();
if (!node_to_cpumask)
goto outcpumsk;
masks = kcalloc(nvecs, sizeof(*masks), GFP_KERNEL);
if (!masks)
goto outnodemsk;
/* Fill out vectors at the beginning that don't need affinity */
for (curvec = 0; curvec < affd->pre_vectors; curvec++)
cpumask_copy(masks + curvec, irq_default_affinity);
/* Stabilize the cpumasks */
get_online_cpus();
build_node_to_cpumask(node_to_cpumask);
curvec += irq_build_affinity_masks(affd, curvec, affvecs,
node_to_cpumask, cpu_possible_mask,
nmsk, masks);
put_online_cpus();
/* Fill out vectors at the end that don't need affinity */
for (; curvec < nvecs; curvec++)
cpumask_copy(masks + curvec, irq_default_affinity);
outnodemsk:
free_node_to_cpumask(node_to_cpumask);
outcpumsk:
free_cpumask_var(nmsk);
return masks;
}
/**
* irq_calc_affinity_vectors - Calculate the optimal number of vectors
* @minvec: The minimum number of vectors available
* @maxvec: The maximum number of vectors available
* @affd: Description of the affinity requirements
*/
int irq_calc_affinity_vectors(int minvec, int maxvec, const struct irq_affinity *affd)
{
int resv = affd->pre_vectors + affd->post_vectors;
int vecs = maxvec - resv;
int ret;
if (resv > minvec)
return 0;
get_online_cpus();
ret = min_t(int, cpumask_weight(cpu_possible_mask), vecs) + resv;
put_online_cpus();
return ret;
}