WSL2-Linux-Kernel/drivers/usb/core/ledtrig-usbport.c

368 строки
8.8 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0
usb: core: Introduce a USB port LED trigger This commit adds a new trigger responsible for turning on LED when USB device gets connected to the selected USB port. This can can useful for various home routers that have USB port(s) and a proper LED telling user a device is connected. The trigger gets its documentation file but basically it just requires enabling it and selecting USB ports (e.g. echo 1 > ports/usb1-1). There was a long discussion on design of this driver. Its current state is a result of picking them most adjustable solution as others couldn't handle all cases. 1) It wasn't possible for the driver to register separated trigger for each USB port. Some physical USB ports are handled by more than one controller and so by more than one USB port. E.g. USB 2.0 physical port may be handled by OHCI's port and EHCI's port. It's also not possible to assign more than 1 trigger to a single LED and implementing such feature would be tricky due to syncing triggers and sysfs conflicts with old triggers. 2) Another idea was to register trigger per USB hub. This wouldn't allow handling devices with multiple USB LEDs and controllers (hubs) controlling more than 1 physical port. It's common for hubs to have few ports and each may have its own LED. This final trigger is highly flexible. It allows selecting any USB ports for any LED. It was also modified (comparing to the initial version) to allow choosing ports rather than having user /guess/ proper names. It was successfully tested on SmartRG SR400ac which has 3 USB LEDs, 2 physical ports and 3 controllers. It was noted USB subsystem already has usb-gadget and usb-host triggers but they are pretty trivial ones. They indicate activity only and can't have ports specified. In future it may be good idea to consider adding activity support to usbport as well. This should allow switching to this more generic driver and maybe marking old ones as obsolete. This can be implemented with another sysfs file for setting mode. The default mode wouldn't change so there won't be ABI breakage and so such feature can be safely implemented later. There was also an idea of supporting other devices (PCI, SDIO, etc.) but as this driver already contains some USB specific code (and will get more) these should be probably separated drivers (triggers). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-16 17:13:48 +03:00
/*
* USB port LED trigger
*
* Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
*/
#include <linux/device.h>
#include <linux/leds.h>
#include <linux/module.h>
#include <linux/of.h>
usb: core: Introduce a USB port LED trigger This commit adds a new trigger responsible for turning on LED when USB device gets connected to the selected USB port. This can can useful for various home routers that have USB port(s) and a proper LED telling user a device is connected. The trigger gets its documentation file but basically it just requires enabling it and selecting USB ports (e.g. echo 1 > ports/usb1-1). There was a long discussion on design of this driver. Its current state is a result of picking them most adjustable solution as others couldn't handle all cases. 1) It wasn't possible for the driver to register separated trigger for each USB port. Some physical USB ports are handled by more than one controller and so by more than one USB port. E.g. USB 2.0 physical port may be handled by OHCI's port and EHCI's port. It's also not possible to assign more than 1 trigger to a single LED and implementing such feature would be tricky due to syncing triggers and sysfs conflicts with old triggers. 2) Another idea was to register trigger per USB hub. This wouldn't allow handling devices with multiple USB LEDs and controllers (hubs) controlling more than 1 physical port. It's common for hubs to have few ports and each may have its own LED. This final trigger is highly flexible. It allows selecting any USB ports for any LED. It was also modified (comparing to the initial version) to allow choosing ports rather than having user /guess/ proper names. It was successfully tested on SmartRG SR400ac which has 3 USB LEDs, 2 physical ports and 3 controllers. It was noted USB subsystem already has usb-gadget and usb-host triggers but they are pretty trivial ones. They indicate activity only and can't have ports specified. In future it may be good idea to consider adding activity support to usbport as well. This should allow switching to this more generic driver and maybe marking old ones as obsolete. This can be implemented with another sysfs file for setting mode. The default mode wouldn't change so there won't be ABI breakage and so such feature can be safely implemented later. There was also an idea of supporting other devices (PCI, SDIO, etc.) but as this driver already contains some USB specific code (and will get more) these should be probably separated drivers (triggers). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-16 17:13:48 +03:00
#include <linux/slab.h>
#include <linux/usb.h>
#include <linux/usb/of.h>
usb: core: Introduce a USB port LED trigger This commit adds a new trigger responsible for turning on LED when USB device gets connected to the selected USB port. This can can useful for various home routers that have USB port(s) and a proper LED telling user a device is connected. The trigger gets its documentation file but basically it just requires enabling it and selecting USB ports (e.g. echo 1 > ports/usb1-1). There was a long discussion on design of this driver. Its current state is a result of picking them most adjustable solution as others couldn't handle all cases. 1) It wasn't possible for the driver to register separated trigger for each USB port. Some physical USB ports are handled by more than one controller and so by more than one USB port. E.g. USB 2.0 physical port may be handled by OHCI's port and EHCI's port. It's also not possible to assign more than 1 trigger to a single LED and implementing such feature would be tricky due to syncing triggers and sysfs conflicts with old triggers. 2) Another idea was to register trigger per USB hub. This wouldn't allow handling devices with multiple USB LEDs and controllers (hubs) controlling more than 1 physical port. It's common for hubs to have few ports and each may have its own LED. This final trigger is highly flexible. It allows selecting any USB ports for any LED. It was also modified (comparing to the initial version) to allow choosing ports rather than having user /guess/ proper names. It was successfully tested on SmartRG SR400ac which has 3 USB LEDs, 2 physical ports and 3 controllers. It was noted USB subsystem already has usb-gadget and usb-host triggers but they are pretty trivial ones. They indicate activity only and can't have ports specified. In future it may be good idea to consider adding activity support to usbport as well. This should allow switching to this more generic driver and maybe marking old ones as obsolete. This can be implemented with another sysfs file for setting mode. The default mode wouldn't change so there won't be ABI breakage and so such feature can be safely implemented later. There was also an idea of supporting other devices (PCI, SDIO, etc.) but as this driver already contains some USB specific code (and will get more) these should be probably separated drivers (triggers). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-16 17:13:48 +03:00
struct usbport_trig_data {
struct led_classdev *led_cdev;
struct list_head ports;
struct notifier_block nb;
int count; /* Amount of connected matching devices */
};
struct usbport_trig_port {
struct usbport_trig_data *data;
struct usb_device *hub;
int portnum;
char *port_name;
bool observed;
struct device_attribute attr;
struct list_head list;
};
/***************************************
* Helpers
***************************************/
/**
* usbport_trig_usb_dev_observed - Check if dev is connected to observed port
*/
static bool usbport_trig_usb_dev_observed(struct usbport_trig_data *usbport_data,
struct usb_device *usb_dev)
{
struct usbport_trig_port *port;
if (!usb_dev->parent)
return false;
list_for_each_entry(port, &usbport_data->ports, list) {
if (usb_dev->parent == port->hub &&
usb_dev->portnum == port->portnum)
return port->observed;
}
return false;
}
static int usbport_trig_usb_dev_check(struct usb_device *usb_dev, void *data)
{
struct usbport_trig_data *usbport_data = data;
if (usbport_trig_usb_dev_observed(usbport_data, usb_dev))
usbport_data->count++;
return 0;
}
/**
* usbport_trig_update_count - Recalculate amount of connected matching devices
*/
static void usbport_trig_update_count(struct usbport_trig_data *usbport_data)
{
struct led_classdev *led_cdev = usbport_data->led_cdev;
usbport_data->count = 0;
usb_for_each_dev(usbport_data, usbport_trig_usb_dev_check);
usb: core: usbport: Use proper LED API to fix potential crash Calling brightness_set manually isn't safe as some LED drivers don't implement this callback. The best idea is to just use a proper helper which will fallback to the brightness_set_blocking callback if needed. This fixes: [ 1461.761528] Unable to handle kernel NULL pointer dereference at virtual address 00000000 (...) [ 1462.117049] Backtrace: [ 1462.119521] [<bf228164>] (usbport_trig_port_store [ledtrig_usbport]) from [<c023f758>] (dev_attr_store+0x20/0x2c) [ 1462.129826] r7:dcabc7c0 r6:dee0ff80 r5:00000002 r4:bf228164 [ 1462.135511] [<c023f738>] (dev_attr_store) from [<c0169310>] (sysfs_kf_write+0x48/0x4c) [ 1462.143459] r5:00000002 r4:c023f738 [ 1462.147049] [<c01692c8>] (sysfs_kf_write) from [<c0168ab8>] (kernfs_fop_write+0xf8/0x1f8) [ 1462.155258] r5:00000002 r4:df4a1000 [ 1462.158850] [<c01689c0>] (kernfs_fop_write) from [<c0100c78>] (__vfs_write+0x34/0x120) [ 1462.166800] r10:00000000 r9:dee0e000 r8:c000fc24 r7:00000002 r6:dee0ff80 r5:c01689c0 [ 1462.174660] r4:df727a80 [ 1462.177204] [<c0100c44>] (__vfs_write) from [<c0101ae4>] (vfs_write+0xac/0x170) [ 1462.184543] r9:dee0e000 r8:c000fc24 r7:dee0ff80 r6:b6f092d0 r5:df727a80 r4:00000002 [ 1462.192319] [<c0101a38>] (vfs_write) from [<c01028dc>] (SyS_write+0x4c/0xa8) [ 1462.199396] r9:dee0e000 r8:c000fc24 r7:00000002 r6:b6f092d0 r5:df727a80 r4:df727a80 [ 1462.207174] [<c0102890>] (SyS_write) from [<c000fa60>] (ret_fast_syscall+0x0/0x3c) [ 1462.214774] r7:00000004 r6:ffffffff r5:00000000 r4:00000000 [ 1462.220456] Code: bad PC value [ 1462.223560] ---[ end trace 676638a3a12c7a56 ]--- Reported-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Fixes: 0f247626cbb ("usb: core: Introduce a USB port LED trigger") Cc: stable@vger.kernel.org # 4.9+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06 02:39:33 +03:00
led_set_brightness(led_cdev, usbport_data->count ? LED_FULL : LED_OFF);
usb: core: Introduce a USB port LED trigger This commit adds a new trigger responsible for turning on LED when USB device gets connected to the selected USB port. This can can useful for various home routers that have USB port(s) and a proper LED telling user a device is connected. The trigger gets its documentation file but basically it just requires enabling it and selecting USB ports (e.g. echo 1 > ports/usb1-1). There was a long discussion on design of this driver. Its current state is a result of picking them most adjustable solution as others couldn't handle all cases. 1) It wasn't possible for the driver to register separated trigger for each USB port. Some physical USB ports are handled by more than one controller and so by more than one USB port. E.g. USB 2.0 physical port may be handled by OHCI's port and EHCI's port. It's also not possible to assign more than 1 trigger to a single LED and implementing such feature would be tricky due to syncing triggers and sysfs conflicts with old triggers. 2) Another idea was to register trigger per USB hub. This wouldn't allow handling devices with multiple USB LEDs and controllers (hubs) controlling more than 1 physical port. It's common for hubs to have few ports and each may have its own LED. This final trigger is highly flexible. It allows selecting any USB ports for any LED. It was also modified (comparing to the initial version) to allow choosing ports rather than having user /guess/ proper names. It was successfully tested on SmartRG SR400ac which has 3 USB LEDs, 2 physical ports and 3 controllers. It was noted USB subsystem already has usb-gadget and usb-host triggers but they are pretty trivial ones. They indicate activity only and can't have ports specified. In future it may be good idea to consider adding activity support to usbport as well. This should allow switching to this more generic driver and maybe marking old ones as obsolete. This can be implemented with another sysfs file for setting mode. The default mode wouldn't change so there won't be ABI breakage and so such feature can be safely implemented later. There was also an idea of supporting other devices (PCI, SDIO, etc.) but as this driver already contains some USB specific code (and will get more) these should be probably separated drivers (triggers). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-16 17:13:48 +03:00
}
/***************************************
* Device attr
***************************************/
static ssize_t usbport_trig_port_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct usbport_trig_port *port = container_of(attr,
struct usbport_trig_port,
attr);
return sprintf(buf, "%d\n", port->observed) + 1;
}
static ssize_t usbport_trig_port_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t size)
{
struct usbport_trig_port *port = container_of(attr,
struct usbport_trig_port,
attr);
if (!strcmp(buf, "0") || !strcmp(buf, "0\n"))
port->observed = 0;
else if (!strcmp(buf, "1") || !strcmp(buf, "1\n"))
port->observed = 1;
else
return -EINVAL;
usbport_trig_update_count(port->data);
return size;
}
static struct attribute *ports_attrs[] = {
NULL,
};
static const struct attribute_group ports_group = {
.name = "ports",
.attrs = ports_attrs,
};
/***************************************
* Adding & removing ports
***************************************/
/**
* usbport_trig_port_observed - Check if port should be observed
*/
static bool usbport_trig_port_observed(struct usbport_trig_data *usbport_data,
struct usb_device *usb_dev, int port1)
{
struct device *dev = usbport_data->led_cdev->dev;
struct device_node *led_np = dev->of_node;
struct of_phandle_args args;
struct device_node *port_np;
int count, i;
if (!led_np)
return false;
/* Get node of port being added */
port_np = usb_of_get_child_node(usb_dev->dev.of_node, port1);
if (!port_np)
return false;
/* Amount of trigger sources for this LED */
count = of_count_phandle_with_args(led_np, "trigger-sources",
"#trigger-source-cells");
if (count < 0) {
dev_warn(dev, "Failed to get trigger sources for %pOF\n",
led_np);
return false;
}
/* Check list of sources for this specific port */
for (i = 0; i < count; i++) {
int err;
err = of_parse_phandle_with_args(led_np, "trigger-sources",
"#trigger-source-cells", i,
&args);
if (err) {
dev_err(dev, "Failed to get trigger source phandle at index %d: %d\n",
i, err);
continue;
}
of_node_put(args.np);
if (args.np == port_np)
return true;
}
return false;
}
usb: core: Introduce a USB port LED trigger This commit adds a new trigger responsible for turning on LED when USB device gets connected to the selected USB port. This can can useful for various home routers that have USB port(s) and a proper LED telling user a device is connected. The trigger gets its documentation file but basically it just requires enabling it and selecting USB ports (e.g. echo 1 > ports/usb1-1). There was a long discussion on design of this driver. Its current state is a result of picking them most adjustable solution as others couldn't handle all cases. 1) It wasn't possible for the driver to register separated trigger for each USB port. Some physical USB ports are handled by more than one controller and so by more than one USB port. E.g. USB 2.0 physical port may be handled by OHCI's port and EHCI's port. It's also not possible to assign more than 1 trigger to a single LED and implementing such feature would be tricky due to syncing triggers and sysfs conflicts with old triggers. 2) Another idea was to register trigger per USB hub. This wouldn't allow handling devices with multiple USB LEDs and controllers (hubs) controlling more than 1 physical port. It's common for hubs to have few ports and each may have its own LED. This final trigger is highly flexible. It allows selecting any USB ports for any LED. It was also modified (comparing to the initial version) to allow choosing ports rather than having user /guess/ proper names. It was successfully tested on SmartRG SR400ac which has 3 USB LEDs, 2 physical ports and 3 controllers. It was noted USB subsystem already has usb-gadget and usb-host triggers but they are pretty trivial ones. They indicate activity only and can't have ports specified. In future it may be good idea to consider adding activity support to usbport as well. This should allow switching to this more generic driver and maybe marking old ones as obsolete. This can be implemented with another sysfs file for setting mode. The default mode wouldn't change so there won't be ABI breakage and so such feature can be safely implemented later. There was also an idea of supporting other devices (PCI, SDIO, etc.) but as this driver already contains some USB specific code (and will get more) these should be probably separated drivers (triggers). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-16 17:13:48 +03:00
static int usbport_trig_add_port(struct usbport_trig_data *usbport_data,
struct usb_device *usb_dev,
const char *hub_name, int portnum)
{
struct led_classdev *led_cdev = usbport_data->led_cdev;
struct usbport_trig_port *port;
size_t len;
int err;
port = kzalloc(sizeof(*port), GFP_KERNEL);
if (!port) {
err = -ENOMEM;
goto err_out;
}
port->data = usbport_data;
port->hub = usb_dev;
port->portnum = portnum;
port->observed = usbport_trig_port_observed(usbport_data, usb_dev,
portnum);
usb: core: Introduce a USB port LED trigger This commit adds a new trigger responsible for turning on LED when USB device gets connected to the selected USB port. This can can useful for various home routers that have USB port(s) and a proper LED telling user a device is connected. The trigger gets its documentation file but basically it just requires enabling it and selecting USB ports (e.g. echo 1 > ports/usb1-1). There was a long discussion on design of this driver. Its current state is a result of picking them most adjustable solution as others couldn't handle all cases. 1) It wasn't possible for the driver to register separated trigger for each USB port. Some physical USB ports are handled by more than one controller and so by more than one USB port. E.g. USB 2.0 physical port may be handled by OHCI's port and EHCI's port. It's also not possible to assign more than 1 trigger to a single LED and implementing such feature would be tricky due to syncing triggers and sysfs conflicts with old triggers. 2) Another idea was to register trigger per USB hub. This wouldn't allow handling devices with multiple USB LEDs and controllers (hubs) controlling more than 1 physical port. It's common for hubs to have few ports and each may have its own LED. This final trigger is highly flexible. It allows selecting any USB ports for any LED. It was also modified (comparing to the initial version) to allow choosing ports rather than having user /guess/ proper names. It was successfully tested on SmartRG SR400ac which has 3 USB LEDs, 2 physical ports and 3 controllers. It was noted USB subsystem already has usb-gadget and usb-host triggers but they are pretty trivial ones. They indicate activity only and can't have ports specified. In future it may be good idea to consider adding activity support to usbport as well. This should allow switching to this more generic driver and maybe marking old ones as obsolete. This can be implemented with another sysfs file for setting mode. The default mode wouldn't change so there won't be ABI breakage and so such feature can be safely implemented later. There was also an idea of supporting other devices (PCI, SDIO, etc.) but as this driver already contains some USB specific code (and will get more) these should be probably separated drivers (triggers). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-16 17:13:48 +03:00
len = strlen(hub_name) + 8;
port->port_name = kzalloc(len, GFP_KERNEL);
if (!port->port_name) {
err = -ENOMEM;
goto err_free_port;
}
snprintf(port->port_name, len, "%s-port%d", hub_name, portnum);
usb: core: usbport: fix "BUG: key not in .data" when lockdep is enabled This patch fixes a splat that happens if CONFIG_DEBUG_LOCK_ALLOC is enabled and the ledtrig_usbport is loaded. (on a device that has some usb ports). [ 60.695479] BUG: key c53f8420 not in .data! [ 60.695521] ------------[ cut here ]------------ [ 60.698542] WARNING: CPU: 1 PID: 854 at kernel/locking/lockdep.c:3134 __kernfs_create_file+0x5c/0xc0 [ 60.703355] DEBUG_LOCKS_WARN_ON(1) [ 60.712534] Modules linked in: [ 60.944078] CPU: 1 PID: 854 Comm: S96led Not tainted 4.9.44 #0 [ 60.944329] Hardware name: Generic DT based system [ 60.950106] [<c021585c>] (unwind_backtrace) from [<c0212150>] (show_stack+0x10/0x14) [ 60.954878] [<c0212150>] (show_stack) from [<c03a2bc4>] (dump_stack+0x7c/0x9c) [ 60.962772] [<c03a2bc4>] (dump_stack) from [<c021db34>] (__warn+0xbc/0xec) [ 60.969799] [<c021db34>] (__warn) from [<c021db98>] (warn_slowpath_fmt+0x34/0x44) [ 60.976656] [<c021db98>] (warn_slowpath_fmt) [ 60.984210] [<c0320688>] (__kernfs_create_file) [ 60.992712] [<c0320ef0>] (sysfs_add_file_mode_ns) [ 61.002090] [<c0321044>] (sysfs_add_file) from [ 61.010619] [<c0321094>] (sysfs_add_file_to_group) [ 61.019263] [<bf24a47c>] (usbport_trig_add_usb_dev_ports [ledtrig_usbport]) [ 61.031002] [<c0430414>] (bus_for_each_dev) [ 61.042106] [<c0497dc4>] (usb_for_each_dev) [ 61.050375] [<bf24a2ac>] (usbport_trig_activate [ledtrig_usbport]) [ 61.060685] [<c04e1708>] (led_trigger_set) from [<c04e1834>] [...] Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-28 20:11:15 +03:00
sysfs_attr_init(&port->attr.attr);
usb: core: Introduce a USB port LED trigger This commit adds a new trigger responsible for turning on LED when USB device gets connected to the selected USB port. This can can useful for various home routers that have USB port(s) and a proper LED telling user a device is connected. The trigger gets its documentation file but basically it just requires enabling it and selecting USB ports (e.g. echo 1 > ports/usb1-1). There was a long discussion on design of this driver. Its current state is a result of picking them most adjustable solution as others couldn't handle all cases. 1) It wasn't possible for the driver to register separated trigger for each USB port. Some physical USB ports are handled by more than one controller and so by more than one USB port. E.g. USB 2.0 physical port may be handled by OHCI's port and EHCI's port. It's also not possible to assign more than 1 trigger to a single LED and implementing such feature would be tricky due to syncing triggers and sysfs conflicts with old triggers. 2) Another idea was to register trigger per USB hub. This wouldn't allow handling devices with multiple USB LEDs and controllers (hubs) controlling more than 1 physical port. It's common for hubs to have few ports and each may have its own LED. This final trigger is highly flexible. It allows selecting any USB ports for any LED. It was also modified (comparing to the initial version) to allow choosing ports rather than having user /guess/ proper names. It was successfully tested on SmartRG SR400ac which has 3 USB LEDs, 2 physical ports and 3 controllers. It was noted USB subsystem already has usb-gadget and usb-host triggers but they are pretty trivial ones. They indicate activity only and can't have ports specified. In future it may be good idea to consider adding activity support to usbport as well. This should allow switching to this more generic driver and maybe marking old ones as obsolete. This can be implemented with another sysfs file for setting mode. The default mode wouldn't change so there won't be ABI breakage and so such feature can be safely implemented later. There was also an idea of supporting other devices (PCI, SDIO, etc.) but as this driver already contains some USB specific code (and will get more) these should be probably separated drivers (triggers). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-16 17:13:48 +03:00
port->attr.attr.name = port->port_name;
port->attr.attr.mode = S_IRUSR | S_IWUSR;
port->attr.show = usbport_trig_port_show;
port->attr.store = usbport_trig_port_store;
err = sysfs_add_file_to_group(&led_cdev->dev->kobj, &port->attr.attr,
ports_group.name);
if (err)
goto err_free_port_name;
list_add_tail(&port->list, &usbport_data->ports);
return 0;
err_free_port_name:
kfree(port->port_name);
err_free_port:
kfree(port);
err_out:
return err;
}
static int usbport_trig_add_usb_dev_ports(struct usb_device *usb_dev,
void *data)
{
struct usbport_trig_data *usbport_data = data;
int i;
for (i = 1; i <= usb_dev->maxchild; i++)
usbport_trig_add_port(usbport_data, usb_dev,
dev_name(&usb_dev->dev), i);
return 0;
}
static void usbport_trig_remove_port(struct usbport_trig_data *usbport_data,
struct usbport_trig_port *port)
{
struct led_classdev *led_cdev = usbport_data->led_cdev;
list_del(&port->list);
sysfs_remove_file_from_group(&led_cdev->dev->kobj, &port->attr.attr,
ports_group.name);
kfree(port->port_name);
kfree(port);
}
static void usbport_trig_remove_usb_dev_ports(struct usbport_trig_data *usbport_data,
struct usb_device *usb_dev)
{
struct usbport_trig_port *port, *tmp;
list_for_each_entry_safe(port, tmp, &usbport_data->ports, list) {
if (port->hub == usb_dev)
usbport_trig_remove_port(usbport_data, port);
}
}
/***************************************
* Init, exit, etc.
***************************************/
static int usbport_trig_notify(struct notifier_block *nb, unsigned long action,
void *data)
{
struct usbport_trig_data *usbport_data =
container_of(nb, struct usbport_trig_data, nb);
struct led_classdev *led_cdev = usbport_data->led_cdev;
struct usb_device *usb_dev = data;
bool observed;
observed = usbport_trig_usb_dev_observed(usbport_data, usb_dev);
switch (action) {
case USB_DEVICE_ADD:
usbport_trig_add_usb_dev_ports(usb_dev, usbport_data);
if (observed && usbport_data->count++ == 0)
usb: core: usbport: Use proper LED API to fix potential crash Calling brightness_set manually isn't safe as some LED drivers don't implement this callback. The best idea is to just use a proper helper which will fallback to the brightness_set_blocking callback if needed. This fixes: [ 1461.761528] Unable to handle kernel NULL pointer dereference at virtual address 00000000 (...) [ 1462.117049] Backtrace: [ 1462.119521] [<bf228164>] (usbport_trig_port_store [ledtrig_usbport]) from [<c023f758>] (dev_attr_store+0x20/0x2c) [ 1462.129826] r7:dcabc7c0 r6:dee0ff80 r5:00000002 r4:bf228164 [ 1462.135511] [<c023f738>] (dev_attr_store) from [<c0169310>] (sysfs_kf_write+0x48/0x4c) [ 1462.143459] r5:00000002 r4:c023f738 [ 1462.147049] [<c01692c8>] (sysfs_kf_write) from [<c0168ab8>] (kernfs_fop_write+0xf8/0x1f8) [ 1462.155258] r5:00000002 r4:df4a1000 [ 1462.158850] [<c01689c0>] (kernfs_fop_write) from [<c0100c78>] (__vfs_write+0x34/0x120) [ 1462.166800] r10:00000000 r9:dee0e000 r8:c000fc24 r7:00000002 r6:dee0ff80 r5:c01689c0 [ 1462.174660] r4:df727a80 [ 1462.177204] [<c0100c44>] (__vfs_write) from [<c0101ae4>] (vfs_write+0xac/0x170) [ 1462.184543] r9:dee0e000 r8:c000fc24 r7:dee0ff80 r6:b6f092d0 r5:df727a80 r4:00000002 [ 1462.192319] [<c0101a38>] (vfs_write) from [<c01028dc>] (SyS_write+0x4c/0xa8) [ 1462.199396] r9:dee0e000 r8:c000fc24 r7:00000002 r6:b6f092d0 r5:df727a80 r4:df727a80 [ 1462.207174] [<c0102890>] (SyS_write) from [<c000fa60>] (ret_fast_syscall+0x0/0x3c) [ 1462.214774] r7:00000004 r6:ffffffff r5:00000000 r4:00000000 [ 1462.220456] Code: bad PC value [ 1462.223560] ---[ end trace 676638a3a12c7a56 ]--- Reported-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Fixes: 0f247626cbb ("usb: core: Introduce a USB port LED trigger") Cc: stable@vger.kernel.org # 4.9+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06 02:39:33 +03:00
led_set_brightness(led_cdev, LED_FULL);
usb: core: Introduce a USB port LED trigger This commit adds a new trigger responsible for turning on LED when USB device gets connected to the selected USB port. This can can useful for various home routers that have USB port(s) and a proper LED telling user a device is connected. The trigger gets its documentation file but basically it just requires enabling it and selecting USB ports (e.g. echo 1 > ports/usb1-1). There was a long discussion on design of this driver. Its current state is a result of picking them most adjustable solution as others couldn't handle all cases. 1) It wasn't possible for the driver to register separated trigger for each USB port. Some physical USB ports are handled by more than one controller and so by more than one USB port. E.g. USB 2.0 physical port may be handled by OHCI's port and EHCI's port. It's also not possible to assign more than 1 trigger to a single LED and implementing such feature would be tricky due to syncing triggers and sysfs conflicts with old triggers. 2) Another idea was to register trigger per USB hub. This wouldn't allow handling devices with multiple USB LEDs and controllers (hubs) controlling more than 1 physical port. It's common for hubs to have few ports and each may have its own LED. This final trigger is highly flexible. It allows selecting any USB ports for any LED. It was also modified (comparing to the initial version) to allow choosing ports rather than having user /guess/ proper names. It was successfully tested on SmartRG SR400ac which has 3 USB LEDs, 2 physical ports and 3 controllers. It was noted USB subsystem already has usb-gadget and usb-host triggers but they are pretty trivial ones. They indicate activity only and can't have ports specified. In future it may be good idea to consider adding activity support to usbport as well. This should allow switching to this more generic driver and maybe marking old ones as obsolete. This can be implemented with another sysfs file for setting mode. The default mode wouldn't change so there won't be ABI breakage and so such feature can be safely implemented later. There was also an idea of supporting other devices (PCI, SDIO, etc.) but as this driver already contains some USB specific code (and will get more) these should be probably separated drivers (triggers). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-16 17:13:48 +03:00
return NOTIFY_OK;
case USB_DEVICE_REMOVE:
usbport_trig_remove_usb_dev_ports(usbport_data, usb_dev);
if (observed && --usbport_data->count == 0)
usb: core: usbport: Use proper LED API to fix potential crash Calling brightness_set manually isn't safe as some LED drivers don't implement this callback. The best idea is to just use a proper helper which will fallback to the brightness_set_blocking callback if needed. This fixes: [ 1461.761528] Unable to handle kernel NULL pointer dereference at virtual address 00000000 (...) [ 1462.117049] Backtrace: [ 1462.119521] [<bf228164>] (usbport_trig_port_store [ledtrig_usbport]) from [<c023f758>] (dev_attr_store+0x20/0x2c) [ 1462.129826] r7:dcabc7c0 r6:dee0ff80 r5:00000002 r4:bf228164 [ 1462.135511] [<c023f738>] (dev_attr_store) from [<c0169310>] (sysfs_kf_write+0x48/0x4c) [ 1462.143459] r5:00000002 r4:c023f738 [ 1462.147049] [<c01692c8>] (sysfs_kf_write) from [<c0168ab8>] (kernfs_fop_write+0xf8/0x1f8) [ 1462.155258] r5:00000002 r4:df4a1000 [ 1462.158850] [<c01689c0>] (kernfs_fop_write) from [<c0100c78>] (__vfs_write+0x34/0x120) [ 1462.166800] r10:00000000 r9:dee0e000 r8:c000fc24 r7:00000002 r6:dee0ff80 r5:c01689c0 [ 1462.174660] r4:df727a80 [ 1462.177204] [<c0100c44>] (__vfs_write) from [<c0101ae4>] (vfs_write+0xac/0x170) [ 1462.184543] r9:dee0e000 r8:c000fc24 r7:dee0ff80 r6:b6f092d0 r5:df727a80 r4:00000002 [ 1462.192319] [<c0101a38>] (vfs_write) from [<c01028dc>] (SyS_write+0x4c/0xa8) [ 1462.199396] r9:dee0e000 r8:c000fc24 r7:00000002 r6:b6f092d0 r5:df727a80 r4:df727a80 [ 1462.207174] [<c0102890>] (SyS_write) from [<c000fa60>] (ret_fast_syscall+0x0/0x3c) [ 1462.214774] r7:00000004 r6:ffffffff r5:00000000 r4:00000000 [ 1462.220456] Code: bad PC value [ 1462.223560] ---[ end trace 676638a3a12c7a56 ]--- Reported-by: Ralph Sennhauser <ralph.sennhauser@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Fixes: 0f247626cbb ("usb: core: Introduce a USB port LED trigger") Cc: stable@vger.kernel.org # 4.9+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-12-06 02:39:33 +03:00
led_set_brightness(led_cdev, LED_OFF);
usb: core: Introduce a USB port LED trigger This commit adds a new trigger responsible for turning on LED when USB device gets connected to the selected USB port. This can can useful for various home routers that have USB port(s) and a proper LED telling user a device is connected. The trigger gets its documentation file but basically it just requires enabling it and selecting USB ports (e.g. echo 1 > ports/usb1-1). There was a long discussion on design of this driver. Its current state is a result of picking them most adjustable solution as others couldn't handle all cases. 1) It wasn't possible for the driver to register separated trigger for each USB port. Some physical USB ports are handled by more than one controller and so by more than one USB port. E.g. USB 2.0 physical port may be handled by OHCI's port and EHCI's port. It's also not possible to assign more than 1 trigger to a single LED and implementing such feature would be tricky due to syncing triggers and sysfs conflicts with old triggers. 2) Another idea was to register trigger per USB hub. This wouldn't allow handling devices with multiple USB LEDs and controllers (hubs) controlling more than 1 physical port. It's common for hubs to have few ports and each may have its own LED. This final trigger is highly flexible. It allows selecting any USB ports for any LED. It was also modified (comparing to the initial version) to allow choosing ports rather than having user /guess/ proper names. It was successfully tested on SmartRG SR400ac which has 3 USB LEDs, 2 physical ports and 3 controllers. It was noted USB subsystem already has usb-gadget and usb-host triggers but they are pretty trivial ones. They indicate activity only and can't have ports specified. In future it may be good idea to consider adding activity support to usbport as well. This should allow switching to this more generic driver and maybe marking old ones as obsolete. This can be implemented with another sysfs file for setting mode. The default mode wouldn't change so there won't be ABI breakage and so such feature can be safely implemented later. There was also an idea of supporting other devices (PCI, SDIO, etc.) but as this driver already contains some USB specific code (and will get more) these should be probably separated drivers (triggers). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-16 17:13:48 +03:00
return NOTIFY_OK;
}
return NOTIFY_DONE;
}
static void usbport_trig_activate(struct led_classdev *led_cdev)
{
struct usbport_trig_data *usbport_data;
int err;
usbport_data = kzalloc(sizeof(*usbport_data), GFP_KERNEL);
if (!usbport_data)
return;
usbport_data->led_cdev = led_cdev;
/* List of ports */
INIT_LIST_HEAD(&usbport_data->ports);
err = sysfs_create_group(&led_cdev->dev->kobj, &ports_group);
if (err)
goto err_free;
usb_for_each_dev(usbport_data, usbport_trig_add_usb_dev_ports);
usbport_trig_update_count(usbport_data);
usb: core: Introduce a USB port LED trigger This commit adds a new trigger responsible for turning on LED when USB device gets connected to the selected USB port. This can can useful for various home routers that have USB port(s) and a proper LED telling user a device is connected. The trigger gets its documentation file but basically it just requires enabling it and selecting USB ports (e.g. echo 1 > ports/usb1-1). There was a long discussion on design of this driver. Its current state is a result of picking them most adjustable solution as others couldn't handle all cases. 1) It wasn't possible for the driver to register separated trigger for each USB port. Some physical USB ports are handled by more than one controller and so by more than one USB port. E.g. USB 2.0 physical port may be handled by OHCI's port and EHCI's port. It's also not possible to assign more than 1 trigger to a single LED and implementing such feature would be tricky due to syncing triggers and sysfs conflicts with old triggers. 2) Another idea was to register trigger per USB hub. This wouldn't allow handling devices with multiple USB LEDs and controllers (hubs) controlling more than 1 physical port. It's common for hubs to have few ports and each may have its own LED. This final trigger is highly flexible. It allows selecting any USB ports for any LED. It was also modified (comparing to the initial version) to allow choosing ports rather than having user /guess/ proper names. It was successfully tested on SmartRG SR400ac which has 3 USB LEDs, 2 physical ports and 3 controllers. It was noted USB subsystem already has usb-gadget and usb-host triggers but they are pretty trivial ones. They indicate activity only and can't have ports specified. In future it may be good idea to consider adding activity support to usbport as well. This should allow switching to this more generic driver and maybe marking old ones as obsolete. This can be implemented with another sysfs file for setting mode. The default mode wouldn't change so there won't be ABI breakage and so such feature can be safely implemented later. There was also an idea of supporting other devices (PCI, SDIO, etc.) but as this driver already contains some USB specific code (and will get more) these should be probably separated drivers (triggers). Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-09-16 17:13:48 +03:00
/* Notifications */
usbport_data->nb.notifier_call = usbport_trig_notify,
led_cdev->trigger_data = usbport_data;
usb_register_notify(&usbport_data->nb);
led_cdev->activated = true;
return;
err_free:
kfree(usbport_data);
}
static void usbport_trig_deactivate(struct led_classdev *led_cdev)
{
struct usbport_trig_data *usbport_data = led_cdev->trigger_data;
struct usbport_trig_port *port, *tmp;
if (!led_cdev->activated)
return;
list_for_each_entry_safe(port, tmp, &usbport_data->ports, list) {
usbport_trig_remove_port(usbport_data, port);
}
usb_unregister_notify(&usbport_data->nb);
sysfs_remove_group(&led_cdev->dev->kobj, &ports_group);
kfree(usbport_data);
led_cdev->activated = false;
}
static struct led_trigger usbport_led_trigger = {
.name = "usbport",
.activate = usbport_trig_activate,
.deactivate = usbport_trig_deactivate,
};
static int __init usbport_trig_init(void)
{
return led_trigger_register(&usbport_led_trigger);
}
static void __exit usbport_trig_exit(void)
{
led_trigger_unregister(&usbport_led_trigger);
}
module_init(usbport_trig_init);
module_exit(usbport_trig_exit);
MODULE_AUTHOR("Rafał Miłecki <rafal@milecki.pl>");
MODULE_DESCRIPTION("USB port trigger");
MODULE_LICENSE("GPL v2");