WSL2-Linux-Kernel/drivers/scsi/mpt3sas/Makefile

# mpt3sas makefile
obj-$(CONFIG_SCSI_MPT3SAS) += mpt3sas.o
mpt3sas-y +=  mpt3sas_base.o     \
		mpt3sas_config.o \
		mpt3sas_scsih.o      \
		mpt3sas_transport.o     \
		mpt3sas_ctl.o	\
		mpt3sas_trigger_diag.o \
		mpt3sas_warpdrive.o
[SCSI] mpt3sas: add new driver supporting 12GB SAS These driver files are initially, substantially similar to mpt2sas but, because mpt2sas is going into maintenance mode and mp3sas will become heavily developed, we elected to keep the code bases separate. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Reviewed-by: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> 2012-11-30 06:14:21 +04:00			`# mpt3sas makefile`
[SCSI] Allow MPT Fusion SAS 3.0 driver to be built into the kernel Right now the Makefile for the mpt3sas driver does not even allow the driver to be built into the kernel. So fix that up, as there doesn't seem to be any obvious reason why this shouldn't be done. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> 2013-09-04 02:00:11 +04:00			`obj-$(CONFIG_SCSI_MPT3SAS) += mpt3sas.o`
[SCSI] mpt3sas: add new driver supporting 12GB SAS These driver files are initially, substantially similar to mpt2sas but, because mpt2sas is going into maintenance mode and mp3sas will become heavily developed, we elected to keep the code bases separate. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Reviewed-by: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> 2012-11-30 06:14:21 +04:00			`mpt3sas-y += mpt3sas_base.o \`
			`mpt3sas_config.o \`
			`mpt3sas_scsih.o \`
			`mpt3sas_transport.o \`
			`mpt3sas_ctl.o \`
mpt3sas: Move Gen3 HBA's device registration to a separate file Created a mpt3sas_module.c file for mpt3sas driver where it can register SAS3 HBA devices with PCI, SML, IOCTL subsystems. Also removed the corresponding interfaces from mpt3sas_scsih.c file. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Acked-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 2015-11-11 15:00:19 +03:00			`mpt3sas_trigger_diag.o \`
mpt3sas: Single driver module which supports both SAS 2.0 & SAS 3.0 HBAs Modified the mpt3sas driver to have a single driver module which supports both SAS 2.0 & SAS 3.0 HBA devices. * Added SAS 2.0 HBA device IDs to the mpt3sas_pci_table pci table. * Created two separate SCSI host templates for SAS2 and SAS3 HBAs so that, during the driver load time driver can use corresponding host template(based the pci device ID) while registering a scsi host adapter instance for that pci device. * Registered two IOCTL devices, mpt2ctl is for SAS2 HBAs & mpt3ctl for SAS3 HBAs. Also updated the code to make sure that mpt2ctl device processes only those ioctl cmds issued for the SAS2 HBAs and mpt3ctl device processes only those ioctl cmds issued for the SAS3 HBAs. * Added separate indexing for SAS2 and SAS3 HBAs. * Replaced compile time check 'MPT2SAS_SCSI' to run time check 'hba_mpi_version_belonged' whereever needed. * Aliased this merged driver to mpt2sas using MODULE_ALIAS. * Moved global varaible 'driver_name' to per adapter instance variable. * Created two raid function template and used corresponding raid function templates based on the run time check 'hba_mpi_version_belonged'. * Moved mpt2sas_warpdrive.c file from mpt2sas to mpt3sas folder and renamed it as mpt3sas_warpdrive.c. * Also renamed the functions in mpt3sas_warpdrive.c file to follow current driver function name convention. * Updated the Makefile to build mpt3sas_warpdrive.o file for these WarpDrive-specific functions. * Also in function mpt3sas_setup_direct_io(), used sector_div() API instead of division operator (which gives compilation errors on 32 bit machines). * Removed mpt2sas files, mpt2sas directory & mpt3sas_module.c file. * Added module parameter 'hbas_to_enumerate' which permits using this merged driver as a legacy mpt2sas driver or as a legacy mpt3sas driver. Here are the available options for this module parameter: 0 - Merged driver which enumerates both SAS 2.0 & SAS 3.0 HBAs 1 - Acts as legacy mpt2sas driver, which enumerates only SAS 2.0 HBAs 2 - Acts as legacy mpt3sas driver, which enumerates only SAS 3.0 HBAs * Removed mpt2sas entries from SCSI's Kconfig and Makefile files. Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@avagotech.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 2015-11-11 15:00:35 +03:00			`mpt3sas_warpdrive.o`