WSL2-Linux-Kernel/drivers/pci/controller/dwc/pcie-designware-plat.c

204 строки
4.5 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0
/*
* PCIe RC driver for Synopsys DesignWare Core
*
* Copyright (C) 2015-2016 Synopsys, Inc. (www.synopsys.com)
*
* Authors: Joao Pinto <Joao.Pinto@synopsys.com>
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/of_device.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/resource.h>
#include <linux/types.h>
#include <linux/regmap.h>
#include "pcie-designware.h"
struct dw_plat_pcie {
struct dw_pcie *pci;
struct regmap *regmap;
enum dw_pcie_device_mode mode;
};
struct dw_plat_pcie_of_data {
enum dw_pcie_device_mode mode;
};
static const struct of_device_id dw_plat_pcie_of_match[];
static const struct dw_pcie_host_ops dw_plat_pcie_host_ops = {
};
static int dw_plat_pcie_establish_link(struct dw_pcie *pci)
{
return 0;
}
static const struct dw_pcie_ops dw_pcie_ops = {
.start_link = dw_plat_pcie_establish_link,
};
static void dw_plat_pcie_ep_init(struct dw_pcie_ep *ep)
{
struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
enum pci_barno bar;
for (bar = 0; bar < PCI_STD_NUM_BARS; bar++)
dw_pcie_ep_reset_bar(pci, bar);
}
static int dw_plat_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
enum pci_epc_irq_type type,
u16 interrupt_num)
{
struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
switch (type) {
case PCI_EPC_IRQ_LEGACY:
return dw_pcie_ep_raise_legacy_irq(ep, func_no);
case PCI_EPC_IRQ_MSI:
return dw_pcie_ep_raise_msi_irq(ep, func_no, interrupt_num);
case PCI_EPC_IRQ_MSIX:
return dw_pcie_ep_raise_msix_irq(ep, func_no, interrupt_num);
default:
dev_err(pci->dev, "UNKNOWN IRQ type\n");
}
return 0;
}
static const struct pci_epc_features dw_plat_pcie_epc_features = {
.linkup_notifier = false,
.msi_capable = true,
.msix_capable = true,
};
static const struct pci_epc_features*
dw_plat_pcie_get_features(struct dw_pcie_ep *ep)
{
return &dw_plat_pcie_epc_features;
}
static const struct dw_pcie_ep_ops pcie_ep_ops = {
.ep_init = dw_plat_pcie_ep_init,
.raise_irq = dw_plat_pcie_ep_raise_irq,
.get_features = dw_plat_pcie_get_features,
};
static int dw_plat_add_pcie_port(struct dw_plat_pcie *dw_plat_pcie,
struct platform_device *pdev)
{
struct dw_pcie *pci = dw_plat_pcie->pci;
struct pcie_port *pp = &pci->pp;
struct device *dev = &pdev->dev;
int ret;
pp->irq = platform_get_irq(pdev, 1);
if (pp->irq < 0)
return pp->irq;
pp->num_vectors = MAX_MSI_IRQS;
pp->ops = &dw_plat_pcie_host_ops;
ret = dw_pcie_host_init(pp);
if (ret) {
dev_err(dev, "Failed to initialize host\n");
return ret;
}
return 0;
}
static int dw_plat_pcie_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct dw_plat_pcie *dw_plat_pcie;
struct dw_pcie *pci;
int ret;
const struct of_device_id *match;
const struct dw_plat_pcie_of_data *data;
enum dw_pcie_device_mode mode;
match = of_match_device(dw_plat_pcie_of_match, dev);
if (!match)
return -EINVAL;
data = (struct dw_plat_pcie_of_data *)match->data;
mode = (enum dw_pcie_device_mode)data->mode;
dw_plat_pcie = devm_kzalloc(dev, sizeof(*dw_plat_pcie), GFP_KERNEL);
if (!dw_plat_pcie)
return -ENOMEM;
pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL);
if (!pci)
return -ENOMEM;
pci->dev = dev;
pci->ops = &dw_pcie_ops;
dw_plat_pcie->pci = pci;
dw_plat_pcie->mode = mode;
platform_set_drvdata(pdev, dw_plat_pcie);
switch (dw_plat_pcie->mode) {
case DW_PCIE_RC_TYPE:
if (!IS_ENABLED(CONFIG_PCIE_DW_PLAT_HOST))
return -ENODEV;
ret = dw_plat_add_pcie_port(dw_plat_pcie, pdev);
if (ret < 0)
return ret;
break;
case DW_PCIE_EP_TYPE:
if (!IS_ENABLED(CONFIG_PCIE_DW_PLAT_EP))
return -ENODEV;
PCI: dwc: Move "dbi", "dbi2", and "addr_space" resource setup into common code Most DWC drivers use the common register resource names "dbi", "dbi2", and "addr_space", so let's move their setup into the DWC common code. This means 'dbi_base' in particular is setup later, but it looks like no drivers touch DBI registers before dw_pcie_host_init or dw_pcie_ep_init. Link: https://lore.kernel.org/r/20201105211159.1814485-4-robh@kernel.org Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Jingoo Han <jingoohan1@gmail.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Minghuan Lian <minghuan.Lian@nxp.com> Cc: Mingkai Hu <mingkai.hu@nxp.com> Cc: Roy Zang <roy.zang@nxp.com> Cc: Jonathan Chocron <jonnyc@amazon.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com> Cc: Xiaowei Song <songxiaowei@hisilicon.com> Cc: Binghui Wang <wangbinghui@hisilicon.com> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Stanimir Varbanov <svarbanov@mm-sol.com> Cc: Pratyush Anand <pratyush.anand@gmail.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: linux-omap@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-arm-kernel@axis.com Cc: linux-arm-msm@vger.kernel.org Cc: linux-tegra@vger.kernel.org
2020-11-06 00:11:46 +03:00
pci->ep.ops = &pcie_ep_ops;
return dw_pcie_ep_init(&pci->ep);
break;
default:
dev_err(dev, "INVALID device type %d\n", dw_plat_pcie->mode);
}
return 0;
}
static const struct dw_plat_pcie_of_data dw_plat_pcie_rc_of_data = {
.mode = DW_PCIE_RC_TYPE,
};
static const struct dw_plat_pcie_of_data dw_plat_pcie_ep_of_data = {
.mode = DW_PCIE_EP_TYPE,
};
static const struct of_device_id dw_plat_pcie_of_match[] = {
{
.compatible = "snps,dw-pcie",
.data = &dw_plat_pcie_rc_of_data,
},
{
.compatible = "snps,dw-pcie-ep",
.data = &dw_plat_pcie_ep_of_data,
},
{},
};
static struct platform_driver dw_plat_pcie_driver = {
.driver = {
.name = "dw-pcie",
.of_match_table = dw_plat_pcie_of_match,
.suppress_bind_attrs = true,
},
.probe = dw_plat_pcie_probe,
};
builtin_platform_driver(dw_plat_pcie_driver);