microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/acpi/acpi_cmos_rtc.c

91 строка
2.1 KiB
C
Исходник Обычный вид История

ACPI: Add CMOS RTC Operation Region handler support On HP Folio 13-2000, the BIOS defines a CMOS RTC Operation Region and the EC's _REG methord accesses that region. Thus an appropriate address space handler must be registered for that region before the EC driver is loaded. Introduce a mechanism for adding CMOS RTC address space handlers. Register an ACPI scan handler for CMOS RTC devices such that, when a device of that kind is detected during an ACPI namespace scan, a common CMOS RTC operation region address space handler will be installed for it. References: https://bugzilla.kernel.org/show_bug.cgi?id=54621 Reported-and-tested-by: Stefan Nagy <public@stefan-nagy.at> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Cc: 3.9+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-05 06:27:50 +04:00
/*
* ACPI support for CMOS RTC Address Space access
*
* Copyright (C) 2013, Intel Corporation
* Authors: Lan Tianyu <tianyu.lan@intel.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/acpi.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <asm-generic/rtc.h>
#include "internal.h"
ACPI_MODULE_NAME("cmos rtc");
static const struct acpi_device_id acpi_cmos_rtc_ids[] = {
{ "PNP0B00" },
{ "PNP0B01" },
{ "PNP0B02" },
{}
};
static acpi_status
acpi_cmos_rtc_space_handler(u32 function, acpi_physical_address address,
u32 bits, u64 *value64,
void *handler_context, void *region_context)
{
int i;
ACPI / RTC: Fix CMOS RTC opregion handler accesses to wrong addresses The value64 parameter is an u64 point that used to transfer the value for write to CMOS, or used to return the value that's read from CMOS. The value64 is an u64 point, so don't need get address again. It causes acpi_cmos_rtc_space_handler always return 0 to reader and didn't write expected value to CMOS. Signed-off-by: Lee, Chun-Yi <jlee@suse.com> Cc: 3.11+ <stable@vger.kernel.org> # 3.11+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-04 11:13:39 +04:00
u8 *value = (u8 *)value64;
ACPI: Add CMOS RTC Operation Region handler support On HP Folio 13-2000, the BIOS defines a CMOS RTC Operation Region and the EC's _REG methord accesses that region. Thus an appropriate address space handler must be registered for that region before the EC driver is loaded. Introduce a mechanism for adding CMOS RTC address space handlers. Register an ACPI scan handler for CMOS RTC devices such that, when a device of that kind is detected during an ACPI namespace scan, a common CMOS RTC operation region address space handler will be installed for it. References: https://bugzilla.kernel.org/show_bug.cgi?id=54621 Reported-and-tested-by: Stefan Nagy <public@stefan-nagy.at> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Cc: 3.9+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-05 06:27:50 +04:00
if (address > 0xff || !value64)
return AE_BAD_PARAMETER;
if (function != ACPI_WRITE && function != ACPI_READ)
return AE_BAD_PARAMETER;
spin_lock_irq(&rtc_lock);
for (i = 0; i < DIV_ROUND_UP(bits, 8); ++i, ++address, ++value)
if (function == ACPI_READ)
*value = CMOS_READ(address);
else
CMOS_WRITE(*value, address);
spin_unlock_irq(&rtc_lock);
return AE_OK;
}
static int acpi_install_cmos_rtc_space_handler(struct acpi_device *adev,
const struct acpi_device_id *id)
{
acpi_status status;
status = acpi_install_address_space_handler(adev->handle,
ACPI_ADR_SPACE_CMOS,
&acpi_cmos_rtc_space_handler,
NULL, NULL);
if (ACPI_FAILURE(status)) {
pr_err(PREFIX "Error installing CMOS-RTC region handler\n");
return -ENODEV;
}
ACPI / PNP: use device ID list for PNPACPI device enumeration ACPI can be used to enumerate PNP devices, but the code does not handle this in the right way currently. Namely, if an ACPI device object 1. Has a _CRS method, 2. Has an identification of "three capital characters followed by four hex digits", 3. Is not in the excluded IDs list, it will be enumerated to PNP bus (that is, a PNP device object will be create for it). This means that, actually, the PNP bus type is used as the default bus type for enumerating _HID devices in ACPI. However, more and more _HID devices need to be enumerated to the platform bus instead (that is, platform device objects need to be created for them). As a result, the device ID list in acpi_platform.c is used to enforce creating platform device objects rather than PNP device objects for matching devices. That list has been continuously growing recently, unfortunately, and it is pretty much guaranteed to grow even more in the future. To address that problem it is better to enumerate _HID devices as platform devices by default. To this end, change the way of enumerating PNP devices by adding a PNP ACPI scan handler that will use a device ID list to create PNP devices for the ACPI device objects whose device IDs are present in that list. The initial device ID list in the PNP ACPI scan handler contains all of the pnp_device_id strings from all the existing PNP drivers, so this change should be transparent to the PNP core and all of the PNP drivers. Still, in the future it should be possible to reduce its size by converting PNP drivers that need not be PNP for any technical reasons into platform drivers. Signed-off-by: Zhang Rui <rui.zhang@intel.com> [rjw: Rewrote the changelog, modified the PNP ACPI scan handler code] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2014-05-30 06:23:01 +04:00
return 1;
ACPI: Add CMOS RTC Operation Region handler support On HP Folio 13-2000, the BIOS defines a CMOS RTC Operation Region and the EC's _REG methord accesses that region. Thus an appropriate address space handler must be registered for that region before the EC driver is loaded. Introduce a mechanism for adding CMOS RTC address space handlers. Register an ACPI scan handler for CMOS RTC devices such that, when a device of that kind is detected during an ACPI namespace scan, a common CMOS RTC operation region address space handler will be installed for it. References: https://bugzilla.kernel.org/show_bug.cgi?id=54621 Reported-and-tested-by: Stefan Nagy <public@stefan-nagy.at> Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Cc: 3.9+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-05 06:27:50 +04:00
}
static void acpi_remove_cmos_rtc_space_handler(struct acpi_device *adev)
{
if (ACPI_FAILURE(acpi_remove_address_space_handler(adev->handle,
ACPI_ADR_SPACE_CMOS, &acpi_cmos_rtc_space_handler)))
pr_err(PREFIX "Error removing CMOS-RTC region handler\n");
}
static struct acpi_scan_handler cmos_rtc_handler = {
.ids = acpi_cmos_rtc_ids,
.attach = acpi_install_cmos_rtc_space_handler,
.detach = acpi_remove_cmos_rtc_space_handler,
};
void __init acpi_cmos_rtc_init(void)
{
acpi_scan_add_handler(&cmos_rtc_handler);
}