microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/acpi/acpi_apd.c

257 строки
6.2 KiB
C
Исходник Обычный вид История

ACPI: add AMD ACPI2Platform device support for x86 system This new feature is to interpret AMD specific ACPI device to platform device such as I2C, UART, GPIO found on AMD CZ and later chipsets. It based on example intel LPSS. Now, it can support AMD I2C, UART and GPIO. Signed-off-by: Ken Xue <Ken.Xue@amd.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-06 03:27:51 +03:00
/*
* AMD ACPI support for ACPI2platform device.
*
* Copyright (c) 2014,2015 AMD Corporation.
* Authors: Ken Xue <Ken.Xue@amd.com>
* Wu, Jeff <Jeff.Wu@amd.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/clk-provider.h>
ACPI: APD: Add AMD misc clock handler support AMD SoC exposes clock for general purpose use. The clock registration is done in clk-st driver. The MMIO mapping are passed on to the clock driver for accessing the registers. The misc clock handler will create MMIO mappings to access the clock registers and enable the clock driver to expose the clock for use of drivers which will connect to it. Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-09 12:59:01 +03:00
#include <linux/platform_data/clk-st.h>
ACPI: add AMD ACPI2Platform device support for x86 system This new feature is to interpret AMD specific ACPI device to platform device such as I2C, UART, GPIO found on AMD CZ and later chipsets. It based on example intel LPSS. Now, it can support AMD I2C, UART and GPIO. Signed-off-by: Ken Xue <Ken.Xue@amd.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-06 03:27:51 +03:00
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
#include <linux/clkdev.h>
#include <linux/acpi.h>
#include <linux/err.h>
clk: Remove io.h from clk-provider.h Now that we've gotten rid of clk_readl() we can remove io.h from the clk-provider header and push out the io.h include to any code that isn't already including the io.h header but using things like readl/writel, etc. Found with this grep: git grep -l clk-provider.h | grep '.c$' | xargs git grep -L 'linux/io.h' | \ xargs git grep -l \ -e '\<__iowrite32_copy\>' --or \ -e '\<__ioread32_copy\>' --or \ -e '\<__iowrite64_copy\>' --or \ -e '\<ioremap_page_range\>' --or \ -e '\<ioremap_huge_init\>' --or \ -e '\<arch_ioremap_pud_supported\>' --or \ -e '\<arch_ioremap_pmd_supported\>' --or \ -e '\<devm_ioport_map\>' --or \ -e '\<devm_ioport_unmap\>' --or \ -e '\<IOMEM_ERR_PTR\>' --or \ -e '\<devm_ioremap\>' --or \ -e '\<devm_ioremap_nocache\>' --or \ -e '\<devm_ioremap_wc\>' --or \ -e '\<devm_iounmap\>' --or \ -e '\<devm_ioremap_release\>' --or \ -e '\<devm_memremap\>' --or \ -e '\<devm_memunmap\>' --or \ -e '\<__devm_memremap_pages\>' --or \ -e '\<pci_remap_cfgspace\>' --or \ -e '\<arch_has_dev_port\>' --or \ -e '\<arch_phys_wc_add\>' --or \ -e '\<arch_phys_wc_del\>' --or \ -e '\<memremap\>' --or \ -e '\<memunmap\>' --or \ -e '\<arch_io_reserve_memtype_wc\>' --or \ -e '\<arch_io_free_memtype_wc\>' --or \ -e '\<__io_aw\>' --or \ -e '\<__io_pbw\>' --or \ -e '\<__io_paw\>' --or \ -e '\<__io_pbr\>' --or \ -e '\<__io_par\>' --or \ -e '\<__raw_readb\>' --or \ -e '\<__raw_readw\>' --or \ -e '\<__raw_readl\>' --or \ -e '\<__raw_readq\>' --or \ -e '\<__raw_writeb\>' --or \ -e '\<__raw_writew\>' --or \ -e '\<__raw_writel\>' --or \ -e '\<__raw_writeq\>' --or \ -e '\<readb\>' --or \ -e '\<readw\>' --or \ -e '\<readl\>' --or \ -e '\<readq\>' --or \ -e '\<writeb\>' --or \ -e '\<writew\>' --or \ -e '\<writel\>' --or \ -e '\<writeq\>' --or \ -e '\<readb_relaxed\>' --or \ -e '\<readw_relaxed\>' --or \ -e '\<readl_relaxed\>' --or \ -e '\<readq_relaxed\>' --or \ -e '\<writeb_relaxed\>' --or \ -e '\<writew_relaxed\>' --or \ -e '\<writel_relaxed\>' --or \ -e '\<writeq_relaxed\>' --or \ -e '\<readsb\>' --or \ -e '\<readsw\>' --or \ -e '\<readsl\>' --or \ -e '\<readsq\>' --or \ -e '\<writesb\>' --or \ -e '\<writesw\>' --or \ -e '\<writesl\>' --or \ -e '\<writesq\>' --or \ -e '\<inb\>' --or \ -e '\<inw\>' --or \ -e '\<inl\>' --or \ -e '\<outb\>' --or \ -e '\<outw\>' --or \ -e '\<outl\>' --or \ -e '\<inb_p\>' --or \ -e '\<inw_p\>' --or \ -e '\<inl_p\>' --or \ -e '\<outb_p\>' --or \ -e '\<outw_p\>' --or \ -e '\<outl_p\>' --or \ -e '\<insb\>' --or \ -e '\<insw\>' --or \ -e '\<insl\>' --or \ -e '\<outsb\>' --or \ -e '\<outsw\>' --or \ -e '\<outsl\>' --or \ -e '\<insb_p\>' --or \ -e '\<insw_p\>' --or \ -e '\<insl_p\>' --or \ -e '\<outsb_p\>' --or \ -e '\<outsw_p\>' --or \ -e '\<outsl_p\>' --or \ -e '\<ioread8\>' --or \ -e '\<ioread16\>' --or \ -e '\<ioread32\>' --or \ -e '\<ioread64\>' --or \ -e '\<iowrite8\>' --or \ -e '\<iowrite16\>' --or \ -e '\<iowrite32\>' --or \ -e '\<iowrite64\>' --or \ -e '\<ioread16be\>' --or \ -e '\<ioread32be\>' --or \ -e '\<ioread64be\>' --or \ -e '\<iowrite16be\>' --or \ -e '\<iowrite32be\>' --or \ -e '\<iowrite64be\>' --or \ -e '\<ioread8_rep\>' --or \ -e '\<ioread16_rep\>' --or \ -e '\<ioread32_rep\>' --or \ -e '\<ioread64_rep\>' --or \ -e '\<iowrite8_rep\>' --or \ -e '\<iowrite16_rep\>' --or \ -e '\<iowrite32_rep\>' --or \ -e '\<iowrite64_rep\>' --or \ -e '\<__io_virt\>' --or \ -e '\<pci_iounmap\>' --or \ -e '\<virt_to_phys\>' --or \ -e '\<phys_to_virt\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap\>' --or \ -e '\<__ioremap\>' --or \ -e '\<iounmap\>' --or \ -e '\<ioremap\>' --or \ -e '\<ioremap_nocache\>' --or \ -e '\<ioremap_uc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wc\>' --or \ -e '\<ioremap_wt\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<ioport_map\>' --or \ -e '\<ioport_unmap\>' --or \ -e '\<xlate_dev_kmem_ptr\>' --or \ -e '\<xlate_dev_mem_ptr\>' --or \ -e '\<unxlate_dev_mem_ptr\>' --or \ -e '\<virt_to_bus\>' --or \ -e '\<bus_to_virt\>' --or \ -e '\<memset_io\>' --or \ -e '\<memcpy_fromio\>' --or \ -e '\<memcpy_toio\>' I also reordered a couple includes when they weren't alphabetical and removed clk.h from kona, replacing it with clk-provider.h because that driver doesn't use clk consumer APIs. Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Acked-by: Tero Kristo <t-kristo@ti.com> Acked-by: Sekhar Nori <nsekhar@ti.com> Cc: Krzysztof Kozlowski <krzk@kernel.org> Acked-by: Mark Brown <broonie@kernel.org> Cc: Chris Zankel <chris@zankel.net> Acked-by: Max Filippov <jcmvbkbc@gmail.com> Acked-by: John Crispin <john@phrozen.org> Acked-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2019-04-19 01:20:22 +03:00
#include <linux/io.h>
ACPI: add AMD ACPI2Platform device support for x86 system This new feature is to interpret AMD specific ACPI device to platform device such as I2C, UART, GPIO found on AMD CZ and later chipsets. It based on example intel LPSS. Now, it can support AMD I2C, UART and GPIO. Signed-off-by: Ken Xue <Ken.Xue@amd.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-06 03:27:51 +03:00
#include <linux/pm.h>
#include "internal.h"
ACPI_MODULE_NAME("acpi_apd");
struct apd_private_data;
/**
* ACPI_APD_SYSFS : add device attributes in sysfs
* ACPI_APD_PM : attach power domain to device
*/
#define ACPI_APD_SYSFS BIT(0)
#define ACPI_APD_PM BIT(1)
/**
* struct apd_device_desc - a descriptor for apd device
* @flags: device flags like %ACPI_APD_SYSFS, %ACPI_APD_PM
* @fixed_clk_rate: fixed rate input clock source for acpi device;
* 0 means no fixed rate input clock source
* @setup: a hook routine to set device resource during create platform device
*
* Device description defined as acpi_device_id.driver_data
*/
struct apd_device_desc {
unsigned int flags;
unsigned int fixed_clk_rate;
ACPI / APD: Provide build-in properties of the UART The UART driver, dw8250.c, needs some details regarding the Designware UART. For ACPI enumerated devices the values are hard-coded, but since the driver also reads the values from device properties, providing them with build-in properties. This allows us to later remove the hard-coded values from the driver. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-08-23 11:33:26 +03:00
struct property_entry *properties;
ACPI: add AMD ACPI2Platform device support for x86 system This new feature is to interpret AMD specific ACPI device to platform device such as I2C, UART, GPIO found on AMD CZ and later chipsets. It based on example intel LPSS. Now, it can support AMD I2C, UART and GPIO. Signed-off-by: Ken Xue <Ken.Xue@amd.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-06 03:27:51 +03:00
int (*setup)(struct apd_private_data *pdata);
};
struct apd_private_data {
struct clk *clk;
struct acpi_device *adev;
const struct apd_device_desc *dev_desc;
};
ACPI / APD: Add APM X-Gene ACPI I2C device support Add APM X-Gene ACPI I2C device support by hooks into existent ACPI APD driver. To fully enable support, require another patch to add the X-Gene ACPI node into the DW I2C driver. Signed-off-by: Loc Ho <lho@apm.com> Reviewed-by: Ken Xue <Ken.Xue@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-11 00:19:16 +03:00
#if defined(CONFIG_X86_AMD_PLATFORM_DEVICE) || defined(CONFIG_ARM64)
ACPI: add AMD ACPI2Platform device support for x86 system This new feature is to interpret AMD specific ACPI device to platform device such as I2C, UART, GPIO found on AMD CZ and later chipsets. It based on example intel LPSS. Now, it can support AMD I2C, UART and GPIO. Signed-off-by: Ken Xue <Ken.Xue@amd.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-06 03:27:51 +03:00
#define APD_ADDR(desc) ((unsigned long)&desc)
static int acpi_apd_setup(struct apd_private_data *pdata)
{
const struct apd_device_desc *dev_desc = pdata->dev_desc;
struct clk *clk = ERR_PTR(-ENODEV);
if (dev_desc->fixed_clk_rate) {
clk = clk_register_fixed_rate(&pdata->adev->dev,
dev_name(&pdata->adev->dev),
ACPI / APD: Remove CLK_IS_ROOT This flag is a no-op now (see commit 47b0eeb3dc8a "clk: Deprecate CLK_IS_ROOT", 2016-02-02) so remove it. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-04-20 04:27:46 +03:00
NULL, 0, dev_desc->fixed_clk_rate);
ACPI: add AMD ACPI2Platform device support for x86 system This new feature is to interpret AMD specific ACPI device to platform device such as I2C, UART, GPIO found on AMD CZ and later chipsets. It based on example intel LPSS. Now, it can support AMD I2C, UART and GPIO. Signed-off-by: Ken Xue <Ken.Xue@amd.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-06 03:27:51 +03:00
clk_register_clkdev(clk, NULL, dev_name(&pdata->adev->dev));
pdata->clk = clk;
}
return 0;
}
ACPI / APD: Add APM X-Gene ACPI I2C device support Add APM X-Gene ACPI I2C device support by hooks into existent ACPI APD driver. To fully enable support, require another patch to add the X-Gene ACPI node into the DW I2C driver. Signed-off-by: Loc Ho <lho@apm.com> Reviewed-by: Ken Xue <Ken.Xue@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-11 00:19:16 +03:00
#ifdef CONFIG_X86_AMD_PLATFORM_DEVICE
ACPI: APD: Add AMD misc clock handler support AMD SoC exposes clock for general purpose use. The clock registration is done in clk-st driver. The MMIO mapping are passed on to the clock driver for accessing the registers. The misc clock handler will create MMIO mappings to access the clock registers and enable the clock driver to expose the clock for use of drivers which will connect to it. Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-09 12:59:01 +03:00
static int misc_check_res(struct acpi_resource *ares, void *data)
{
struct resource res;
return !acpi_dev_resource_memory(ares, &res);
}
static int st_misc_setup(struct apd_private_data *pdata)
{
struct acpi_device *adev = pdata->adev;
struct platform_device *clkdev;
struct st_clk_data *clk_data;
struct resource_entry *rentry;
struct list_head resource_list;
int ret;
clk_data = devm_kzalloc(&adev->dev, sizeof(*clk_data), GFP_KERNEL);
if (!clk_data)
return -ENOMEM;
INIT_LIST_HEAD(&resource_list);
ret = acpi_dev_get_resources(adev, &resource_list, misc_check_res,
NULL);
if (ret < 0)
return -ENOENT;
list_for_each_entry(rentry, &resource_list, node) {
clk_data->base = devm_ioremap(&adev->dev, rentry->res->start,
resource_size(rentry->res));
break;
}
acpi_dev_free_resource_list(&resource_list);
clkdev = platform_device_register_data(&adev->dev, "clk-st",
PLATFORM_DEVID_NONE, clk_data,
sizeof(*clk_data));
return PTR_ERR_OR_ZERO(clkdev);
}
ACPI / APD: constify local structures For structure types defined in the same file or local header files, find top-level static structure declarations that have the following properties: 1. Never reassigned. 2. Address never taken 3. Not passed to a top-level macro call 4. No pointer or array-typed field passed to a function or stored in a variable. Declare structures having all of these properties as const. Done using Coccinelle. Based on a suggestion by Joe Perches <joe@perches.com>. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-11 16:06:06 +03:00
static const struct apd_device_desc cz_i2c_desc = {
ACPI: add AMD ACPI2Platform device support for x86 system This new feature is to interpret AMD specific ACPI device to platform device such as I2C, UART, GPIO found on AMD CZ and later chipsets. It based on example intel LPSS. Now, it can support AMD I2C, UART and GPIO. Signed-off-by: Ken Xue <Ken.Xue@amd.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-06 03:27:51 +03:00
.setup = acpi_apd_setup,
.fixed_clk_rate = 133000000,
};
ACPI / APD: Add clock frequency for future AMD I2C controller This patch supports 150 Mhz i2c clock frequency for Designware ip of future AMD I2C controller. Reviewed-by: S-k, Shyam-sundar <Shyam-sundar.S-k@amd.com> Signed-off-by: Shah, Nehal-bakulchandra <Nehal-bakulchandra.Shah@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-19 12:00:32 +03:00
static const struct apd_device_desc wt_i2c_desc = {
.setup = acpi_apd_setup,
.fixed_clk_rate = 150000000,
};
ACPI / APD: Provide build-in properties of the UART The UART driver, dw8250.c, needs some details regarding the Designware UART. For ACPI enumerated devices the values are hard-coded, but since the driver also reads the values from device properties, providing them with build-in properties. This allows us to later remove the hard-coded values from the driver. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-08-23 11:33:26 +03:00
static struct property_entry uart_properties[] = {
PROPERTY_ENTRY_U32("reg-io-width", 4),
PROPERTY_ENTRY_U32("reg-shift", 2),
PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible"),
{ },
};
ACPI / APD: constify local structures For structure types defined in the same file or local header files, find top-level static structure declarations that have the following properties: 1. Never reassigned. 2. Address never taken 3. Not passed to a top-level macro call 4. No pointer or array-typed field passed to a function or stored in a variable. Declare structures having all of these properties as const. Done using Coccinelle. Based on a suggestion by Joe Perches <joe@perches.com>. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-11 16:06:06 +03:00
static const struct apd_device_desc cz_uart_desc = {
ACPI: add AMD ACPI2Platform device support for x86 system This new feature is to interpret AMD specific ACPI device to platform device such as I2C, UART, GPIO found on AMD CZ and later chipsets. It based on example intel LPSS. Now, it can support AMD I2C, UART and GPIO. Signed-off-by: Ken Xue <Ken.Xue@amd.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-06 03:27:51 +03:00
.setup = acpi_apd_setup,
.fixed_clk_rate = 48000000,
ACPI / APD: Provide build-in properties of the UART The UART driver, dw8250.c, needs some details regarding the Designware UART. For ACPI enumerated devices the values are hard-coded, but since the driver also reads the values from device properties, providing them with build-in properties. This allows us to later remove the hard-coded values from the driver. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-08-23 11:33:26 +03:00
.properties = uart_properties,
ACPI: add AMD ACPI2Platform device support for x86 system This new feature is to interpret AMD specific ACPI device to platform device such as I2C, UART, GPIO found on AMD CZ and later chipsets. It based on example intel LPSS. Now, it can support AMD I2C, UART and GPIO. Signed-off-by: Ken Xue <Ken.Xue@amd.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-06 03:27:51 +03:00
};
ACPI: APD: Add AMD misc clock handler support AMD SoC exposes clock for general purpose use. The clock registration is done in clk-st driver. The MMIO mapping are passed on to the clock driver for accessing the registers. The misc clock handler will create MMIO mappings to access the clock registers and enable the clock driver to expose the clock for use of drivers which will connect to it. Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-09 12:59:01 +03:00
static const struct apd_device_desc st_misc_desc = {
.setup = st_misc_setup,
};
ACPI / APD: Add APM X-Gene ACPI I2C device support Add APM X-Gene ACPI I2C device support by hooks into existent ACPI APD driver. To fully enable support, require another patch to add the X-Gene ACPI node into the DW I2C driver. Signed-off-by: Loc Ho <lho@apm.com> Reviewed-by: Ken Xue <Ken.Xue@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-11 00:19:16 +03:00
#endif
#ifdef CONFIG_ARM64
ACPI / APD: constify local structures For structure types defined in the same file or local header files, find top-level static structure declarations that have the following properties: 1. Never reassigned. 2. Address never taken 3. Not passed to a top-level macro call 4. No pointer or array-typed field passed to a function or stored in a variable. Declare structures having all of these properties as const. Done using Coccinelle. Based on a suggestion by Joe Perches <joe@perches.com>. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-11 16:06:06 +03:00
static const struct apd_device_desc xgene_i2c_desc = {
ACPI / APD: Add APM X-Gene ACPI I2C device support Add APM X-Gene ACPI I2C device support by hooks into existent ACPI APD driver. To fully enable support, require another patch to add the X-Gene ACPI node into the DW I2C driver. Signed-off-by: Loc Ho <lho@apm.com> Reviewed-by: Ken Xue <Ken.Xue@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-11 00:19:16 +03:00
.setup = acpi_apd_setup,
.fixed_clk_rate = 100000000,
};
ACPI / APD: Add device HID for Vulcan SPI controller Add device HID for SPI controller on Broadcom Vulcan ARM64. The default frequency for SPI on Vulcan is 133MHz. Signed-off-by: Kamlakant Patel <kamlakant.patel@broadcom.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-08-09 17:05:21 +03:00
ACPI / APD: constify local structures For structure types defined in the same file or local header files, find top-level static structure declarations that have the following properties: 1. Never reassigned. 2. Address never taken 3. Not passed to a top-level macro call 4. No pointer or array-typed field passed to a function or stored in a variable. Declare structures having all of these properties as const. Done using Coccinelle. Based on a suggestion by Joe Perches <joe@perches.com>. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-09-11 16:06:06 +03:00
static const struct apd_device_desc vulcan_spi_desc = {
ACPI / APD: Add device HID for Vulcan SPI controller Add device HID for SPI controller on Broadcom Vulcan ARM64. The default frequency for SPI on Vulcan is 133MHz. Signed-off-by: Kamlakant Patel <kamlakant.patel@broadcom.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-08-09 17:05:21 +03:00
.setup = acpi_apd_setup,
.fixed_clk_rate = 133000000,
};
ACPI / APD: Add clock frequency for Hisilicon Hip07/08 I2C controller I2C clock frequency of Designware ip for Hisilicon Hip07 is 200M, but 250M for Hip08, use two ACPI IDs to differentiate them. Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Reviewed-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-04-22 06:23:43 +03:00
static const struct apd_device_desc hip07_i2c_desc = {
.setup = acpi_apd_setup,
.fixed_clk_rate = 200000000,
};
static const struct apd_device_desc hip08_i2c_desc = {
.setup = acpi_apd_setup,
.fixed_clk_rate = 250000000,
};
ACPI / APD: Add clock frequency for ThunderX2 I2C controller Add the input frequency of 125MHz for the ThunderX2 I2C controller block. The ACPI ID used is "CAV9007". Signed-off-by: Jayachandran C <jnair@caviumnetworks.com> Signed-off-by: Kamlakant Patel <kamlakant.patel@cavium.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-10-10 09:27:54 +03:00
static const struct apd_device_desc thunderx2_i2c_desc = {
.setup = acpi_apd_setup,
.fixed_clk_rate = 125000000,
};
ACPI / APD: Add clock frequency for Hisilicon Hip08 SPI controller The SPI clock frequency of Designware IP for Hisilicon Hip08 is 250M. The ACPI ID used is "HISI0173". Signed-off-by: Jay Fang <f.fangjian@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-03 06:15:49 +03:00
static const struct apd_device_desc hip08_spi_desc = {
.setup = acpi_apd_setup,
.fixed_clk_rate = 250000000,
};
ACPI / APD: Add APM X-Gene ACPI I2C device support Add APM X-Gene ACPI I2C device support by hooks into existent ACPI APD driver. To fully enable support, require another patch to add the X-Gene ACPI node into the DW I2C driver. Signed-off-by: Loc Ho <lho@apm.com> Reviewed-by: Ken Xue <Ken.Xue@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-11 00:19:16 +03:00
#endif
ACPI: add AMD ACPI2Platform device support for x86 system This new feature is to interpret AMD specific ACPI device to platform device such as I2C, UART, GPIO found on AMD CZ and later chipsets. It based on example intel LPSS. Now, it can support AMD I2C, UART and GPIO. Signed-off-by: Ken Xue <Ken.Xue@amd.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-06 03:27:51 +03:00
#else
#define APD_ADDR(desc) (0UL)
#endif /* CONFIG_X86_AMD_PLATFORM_DEVICE */
/**
* Create platform device during acpi scan attach handle.
* Return value > 0 on success of creating device.
*/
static int acpi_apd_create_device(struct acpi_device *adev,
const struct acpi_device_id *id)
{
const struct apd_device_desc *dev_desc = (void *)id->driver_data;
struct apd_private_data *pdata;
struct platform_device *pdev;
int ret;
if (!dev_desc) {
ACPI / platform: Add support for build-in properties We have a couple of drivers, acpi_apd.c and acpi_lpss.c, that need to pass extra build-in properties to the devices they create. Previously the drivers added those properties to the struct device which is member of the struct acpi_device, but that does not work. Those properties need to be assigned to the struct device of the platform device instead in order for them to become available to the drivers. To fix this, this patch changes acpi_create_platform_device function to take struct property_entry pointer as parameter. Fixes: 20a875e2e86e (serial: 8250_dw: Add quirk for APM X-Gene SoC) Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Yazen Ghannam <yazen.ghannam@amd.com> Tested-by: Jérôme de Bretagne <jerome.debretagne@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-03 17:21:26 +03:00
pdev = acpi_create_platform_device(adev, NULL);
ACPI: add AMD ACPI2Platform device support for x86 system This new feature is to interpret AMD specific ACPI device to platform device such as I2C, UART, GPIO found on AMD CZ and later chipsets. It based on example intel LPSS. Now, it can support AMD I2C, UART and GPIO. Signed-off-by: Ken Xue <Ken.Xue@amd.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-06 03:27:51 +03:00
return IS_ERR_OR_NULL(pdev) ? PTR_ERR(pdev) : 1;
}
pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return -ENOMEM;
pdata->adev = adev;
pdata->dev_desc = dev_desc;
if (dev_desc->setup) {
ret = dev_desc->setup(pdata);
if (ret)
goto err_out;
}
adev->driver_data = pdata;
ACPI / platform: Add support for build-in properties We have a couple of drivers, acpi_apd.c and acpi_lpss.c, that need to pass extra build-in properties to the devices they create. Previously the drivers added those properties to the struct device which is member of the struct acpi_device, but that does not work. Those properties need to be assigned to the struct device of the platform device instead in order for them to become available to the drivers. To fix this, this patch changes acpi_create_platform_device function to take struct property_entry pointer as parameter. Fixes: 20a875e2e86e (serial: 8250_dw: Add quirk for APM X-Gene SoC) Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Tested-by: Yazen Ghannam <yazen.ghannam@amd.com> Tested-by: Jérôme de Bretagne <jerome.debretagne@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-11-03 17:21:26 +03:00
pdev = acpi_create_platform_device(adev, dev_desc->properties);
ACPI: add AMD ACPI2Platform device support for x86 system This new feature is to interpret AMD specific ACPI device to platform device such as I2C, UART, GPIO found on AMD CZ and later chipsets. It based on example intel LPSS. Now, it can support AMD I2C, UART and GPIO. Signed-off-by: Ken Xue <Ken.Xue@amd.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-06 03:27:51 +03:00
if (!IS_ERR_OR_NULL(pdev))
return 1;
ret = PTR_ERR(pdev);
adev->driver_data = NULL;
err_out:
kfree(pdata);
return ret;
}
static const struct acpi_device_id acpi_apd_device_ids[] = {
/* Generic apd devices */
ACPI / APD: Add APM X-Gene ACPI I2C device support Add APM X-Gene ACPI I2C device support by hooks into existent ACPI APD driver. To fully enable support, require another patch to add the X-Gene ACPI node into the DW I2C driver. Signed-off-by: Loc Ho <lho@apm.com> Reviewed-by: Ken Xue <Ken.Xue@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-11 00:19:16 +03:00
#ifdef CONFIG_X86_AMD_PLATFORM_DEVICE
ACPI: add AMD ACPI2Platform device support for x86 system This new feature is to interpret AMD specific ACPI device to platform device such as I2C, UART, GPIO found on AMD CZ and later chipsets. It based on example intel LPSS. Now, it can support AMD I2C, UART and GPIO. Signed-off-by: Ken Xue <Ken.Xue@amd.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-06 03:27:51 +03:00
{ "AMD0010", APD_ADDR(cz_i2c_desc) },
ACPI / APD: Add clock frequency for future AMD I2C controller This patch supports 150 Mhz i2c clock frequency for Designware ip of future AMD I2C controller. Reviewed-by: S-k, Shyam-sundar <Shyam-sundar.S-k@amd.com> Signed-off-by: Shah, Nehal-bakulchandra <Nehal-bakulchandra.Shah@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-10-19 12:00:32 +03:00
{ "AMDI0010", APD_ADDR(wt_i2c_desc) },
ACPI: add AMD ACPI2Platform device support for x86 system This new feature is to interpret AMD specific ACPI device to platform device such as I2C, UART, GPIO found on AMD CZ and later chipsets. It based on example intel LPSS. Now, it can support AMD I2C, UART and GPIO. Signed-off-by: Ken Xue <Ken.Xue@amd.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-06 03:27:51 +03:00
{ "AMD0020", APD_ADDR(cz_uart_desc) },
ACPI / APD: Add device HID for future AMD UART controller Add device HID AMDI0020 to match the AMD ACPI Vendor ID (AMDI) as registered in http://www.uefi.org/acpi_id_list, and the UART controller on future AMD paltform will use the HID instead of AMD0020. Signed-off-by: Wang Hongcheng <annie.wang@amd.com> Acked-by: Ken Xue <Ken.Xue@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-03-11 12:28:23 +03:00
{ "AMDI0020", APD_ADDR(cz_uart_desc) },
ACPI: add AMD ACPI2Platform device support for x86 system This new feature is to interpret AMD specific ACPI device to platform device such as I2C, UART, GPIO found on AMD CZ and later chipsets. It based on example intel LPSS. Now, it can support AMD I2C, UART and GPIO. Signed-off-by: Ken Xue <Ken.Xue@amd.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-06 03:27:51 +03:00
{ "AMD0030", },
ACPI: APD: Add AMD misc clock handler support AMD SoC exposes clock for general purpose use. The clock registration is done in clk-st driver. The MMIO mapping are passed on to the clock driver for accessing the registers. The misc clock handler will create MMIO mappings to access the clock registers and enable the clock driver to expose the clock for use of drivers which will connect to it. Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-05-09 12:59:01 +03:00
{ "AMD0040", APD_ADDR(st_misc_desc)},
ACPI / APD: Add APM X-Gene ACPI I2C device support Add APM X-Gene ACPI I2C device support by hooks into existent ACPI APD driver. To fully enable support, require another patch to add the X-Gene ACPI node into the DW I2C driver. Signed-off-by: Loc Ho <lho@apm.com> Reviewed-by: Ken Xue <Ken.Xue@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-11 00:19:16 +03:00
#endif
#ifdef CONFIG_ARM64
{ "APMC0D0F", APD_ADDR(xgene_i2c_desc) },
ACPI / APD: Add device HID for Vulcan SPI controller Add device HID for SPI controller on Broadcom Vulcan ARM64. The default frequency for SPI on Vulcan is 133MHz. Signed-off-by: Kamlakant Patel <kamlakant.patel@broadcom.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2016-08-09 17:05:21 +03:00
{ "BRCM900D", APD_ADDR(vulcan_spi_desc) },
spi: xlp: update for ARCH_VULCAN2 ARCH_VULCAN arm64 platform (for Broadcom Vulcan ARM64 processors) has been discontinued. Cavium's ThunderX2 CN99XX (ARCH_THUNDER2) will be the next revision of the platform. Update compile dependencies and ACPI ID to reflect this change. There is not need to retain ARCH_VULCAN since the Vulcan processor was never in production and ARCH_VULCAN will be deleted soon. Signed-off-by: Jayachandran C <jnair@caviumnetworks.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-12 14:11:43 +03:00
{ "CAV900D", APD_ADDR(vulcan_spi_desc) },
ACPI / APD: Add clock frequency for ThunderX2 I2C controller Add the input frequency of 125MHz for the ThunderX2 I2C controller block. The ACPI ID used is "CAV9007". Signed-off-by: Jayachandran C <jnair@caviumnetworks.com> Signed-off-by: Kamlakant Patel <kamlakant.patel@cavium.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2017-10-10 09:27:54 +03:00
{ "CAV9007", APD_ADDR(thunderx2_i2c_desc) },
ACPI: APD: Fix HID for Hisilicon Hip07/08 ACPI HID for Hisilicon Hip07/08 should be HISI02A1/2, not HISI0A21/2, HISI02A1/2 was tested ok but was modified by the stupid typo when upstream the patches (by me), correct them to the right IDs (matching the IDs in drivers/i2c/busses/i2c-designware-platdrv.c). Fixes: 6e14cf361a0c (ACPI / APD: Add clock frequency for Hisilicon Hip07/08 I2C controller) Reported-by: Tao Tian <tiantao6@huawei.com> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2017-07-28 12:42:35 +03:00
{ "HISI02A1", APD_ADDR(hip07_i2c_desc) },
{ "HISI02A2", APD_ADDR(hip08_i2c_desc) },
ACPI / APD: Add clock frequency for Hisilicon Hip08 SPI controller The SPI clock frequency of Designware IP for Hisilicon Hip08 is 250M. The ACPI ID used is "HISI0173". Signed-off-by: Jay Fang <f.fangjian@huawei.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-12-03 06:15:49 +03:00
{ "HISI0173", APD_ADDR(hip08_spi_desc) },
ACPI / APD: Add APM X-Gene ACPI I2C device support Add APM X-Gene ACPI I2C device support by hooks into existent ACPI APD driver. To fully enable support, require another patch to add the X-Gene ACPI node into the DW I2C driver. Signed-off-by: Loc Ho <lho@apm.com> Reviewed-by: Ken Xue <Ken.Xue@amd.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-11 00:19:16 +03:00
#endif
ACPI: add AMD ACPI2Platform device support for x86 system This new feature is to interpret AMD specific ACPI device to platform device such as I2C, UART, GPIO found on AMD CZ and later chipsets. It based on example intel LPSS. Now, it can support AMD I2C, UART and GPIO. Signed-off-by: Ken Xue <Ken.Xue@amd.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-02-06 03:27:51 +03:00
{ }
};
static struct acpi_scan_handler apd_handler = {
.ids = acpi_apd_device_ids,
.attach = acpi_apd_create_device,
};
void __init acpi_apd_init(void)
{
acpi_scan_add_handler(&apd_handler);
}