WSL2-Linux-Kernel/fs/ext2/ialloc.c

685 строки
18 KiB
C
Исходник Обычный вид История

License cleanup: add SPDX GPL-2.0 license identifier to files with no license Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 17:07:57 +03:00
// SPDX-License-Identifier: GPL-2.0
/*
* linux/fs/ext2/ialloc.c
*
* Copyright (C) 1992, 1993, 1994, 1995
* Remy Card (card@masi.ibp.fr)
* Laboratoire MASI - Institut Blaise Pascal
* Universite Pierre et Marie Curie (Paris VI)
*
* BSD ufs-inspired inode and directory allocation by
* Stephen Tweedie (sct@dcs.ed.ac.uk), 1993
* Big-endian to little-endian byte-swapping/bitmaps by
* David S. Miller (davem@caip.rutgers.edu), 1995
*/
#include <linux/quotaops.h>
#include <linux/sched.h>
#include <linux/backing-dev.h>
#include <linux/buffer_head.h>
#include <linux/random.h>
#include "ext2.h"
#include "xattr.h"
#include "acl.h"
/*
* ialloc.c contains the inodes allocation and deallocation routines
*/
/*
* The free inodes are managed by bitmaps. A file system contains several
* blocks groups. Each group contains 1 bitmap block for blocks, 1 bitmap
* block for inodes, N blocks for the inode table and data blocks.
*
* The file system contains group descriptors which are located after the
* super block. Each descriptor contains the number of the bitmap block and
* the free blocks count in the block.
*/
/*
* Read the inode allocation bitmap for a given block_group, reading
* into the specified slot in the superblock's bitmap cache.
*
* Return buffer_head of bitmap on success or NULL.
*/
static struct buffer_head *
read_inode_bitmap(struct super_block * sb, unsigned long block_group)
{
struct ext2_group_desc *desc;
struct buffer_head *bh = NULL;
desc = ext2_get_group_desc(sb, block_group, NULL);
if (!desc)
goto error_out;
bh = sb_bread(sb, le32_to_cpu(desc->bg_inode_bitmap));
if (!bh)
ext2_error(sb, "read_inode_bitmap",
"Cannot read inode bitmap - "
"block_group = %lu, inode_bitmap = %u",
block_group, le32_to_cpu(desc->bg_inode_bitmap));
error_out:
return bh;
}
static void ext2_release_inode(struct super_block *sb, int group, int dir)
{
struct ext2_group_desc * desc;
struct buffer_head *bh;
desc = ext2_get_group_desc(sb, group, &bh);
if (!desc) {
ext2_error(sb, "ext2_release_inode",
"can't get descriptor for group %d", group);
return;
}
spin_lock(sb_bgl_lock(EXT2_SB(sb), group));
le16_add_cpu(&desc->bg_free_inodes_count, 1);
if (dir)
le16_add_cpu(&desc->bg_used_dirs_count, -1);
spin_unlock(sb_bgl_lock(EXT2_SB(sb), group));
if (dir)
percpu_counter_dec(&EXT2_SB(sb)->s_dirs_counter);
mark_buffer_dirty(bh);
}
/*
* NOTE! When we get the inode, we're the only people
* that have access to it, and as such there are no
* race conditions we have to worry about. The inode
* is not on the hash-lists, and it cannot be reached
* through the filesystem because the directory entry
* has been deleted earlier.
*
* HOWEVER: we must make sure that we get no aliases,
* which means that we have to call "clear_inode()"
* _before_ we mark the inode not in use in the inode
* bitmaps. Otherwise a newly created file might use
* the same inode number (not actually the same pointer
* though), and then we'd have two inodes sharing the
* same inode number and space on the harddisk.
*/
void ext2_free_inode (struct inode * inode)
{
struct super_block * sb = inode->i_sb;
int is_directory;
unsigned long ino;
struct buffer_head *bitmap_bh;
unsigned long block_group;
unsigned long bit;
struct ext2_super_block * es;
ino = inode->i_ino;
ext2_debug ("freeing inode %lu\n", ino);
/*
* Note: we must free any quota before locking the superblock,
* as writing the quota to disk may need the lock as well.
*/
/* Quota is already initialized in iput() */
dquot_free_inode(inode);
dquot_drop(inode);
es = EXT2_SB(sb)->s_es;
is_directory = S_ISDIR(inode->i_mode);
if (ino < EXT2_FIRST_INO(sb) ||
ino > le32_to_cpu(es->s_inodes_count)) {
ext2_error (sb, "ext2_free_inode",
"reserved or nonexistent inode %lu", ino);
return;
}
block_group = (ino - 1) / EXT2_INODES_PER_GROUP(sb);
bit = (ino - 1) % EXT2_INODES_PER_GROUP(sb);
bitmap_bh = read_inode_bitmap(sb, block_group);
if (!bitmap_bh)
return;
/* Ok, now we can actually update the inode bitmaps.. */
if (!ext2_clear_bit_atomic(sb_bgl_lock(EXT2_SB(sb), block_group),
bit, (void *) bitmap_bh->b_data))
ext2_error (sb, "ext2_free_inode",
"bit already cleared for inode %lu", ino);
else
ext2_release_inode(sb, block_group, is_directory);
mark_buffer_dirty(bitmap_bh);
if (sb->s_flags & MS_SYNCHRONOUS)
sync_dirty_buffer(bitmap_bh);
brelse(bitmap_bh);
}
/*
* We perform asynchronous prereading of the new inode's inode block when
* we create the inode, in the expectation that the inode will be written
* back soon. There are two reasons:
*
* - When creating a large number of files, the async prereads will be
* nicely merged into large reads
* - When writing out a large number of inodes, we don't need to keep on
* stalling the writes while we read the inode block.
*
* FIXME: ext2_get_group_desc() needs to be simplified.
*/
static void ext2_preread_inode(struct inode *inode)
{
unsigned long block_group;
unsigned long offset;
unsigned long block;
struct ext2_group_desc * gdp;
struct backing_dev_info *bdi;
bdi = inode_to_bdi(inode);
if (bdi_read_congested(bdi))
return;
if (bdi_write_congested(bdi))
return;
block_group = (inode->i_ino - 1) / EXT2_INODES_PER_GROUP(inode->i_sb);
gdp = ext2_get_group_desc(inode->i_sb, block_group, NULL);
if (gdp == NULL)
return;
/*
* Figure out the offset within the block group inode table
*/
offset = ((inode->i_ino - 1) % EXT2_INODES_PER_GROUP(inode->i_sb)) *
EXT2_INODE_SIZE(inode->i_sb);
block = le32_to_cpu(gdp->bg_inode_table) +
(offset >> EXT2_BLOCK_SIZE_BITS(inode->i_sb));
sb_breadahead(inode->i_sb, block);
}
/*
* There are two policies for allocating an inode. If the new inode is
* a directory, then a forward search is made for a block group with both
* free space and a low directory-to-inode ratio; if that fails, then of
* the groups with above-average free space, that group with the fewest
* directories already is chosen.
*
* For other inodes, search forward from the parent directory\'s block
* group to find a free inode.
*/
static int find_group_dir(struct super_block *sb, struct inode *parent)
{
int ngroups = EXT2_SB(sb)->s_groups_count;
int avefreei = ext2_count_free_inodes(sb) / ngroups;
struct ext2_group_desc *desc, *best_desc = NULL;
int group, best_group = -1;
for (group = 0; group < ngroups; group++) {
desc = ext2_get_group_desc (sb, group, NULL);
if (!desc || !desc->bg_free_inodes_count)
continue;
if (le16_to_cpu(desc->bg_free_inodes_count) < avefreei)
continue;
if (!best_desc ||
(le16_to_cpu(desc->bg_free_blocks_count) >
le16_to_cpu(best_desc->bg_free_blocks_count))) {
best_group = group;
best_desc = desc;
}
}
if (!best_desc)
return -1;
return best_group;
}
/*
* Orlov's allocator for directories.
*
* We always try to spread first-level directories.
*
* If there are blockgroups with both free inodes and free blocks counts
* not worse than average we return one with smallest directory count.
* Otherwise we simply return a random group.
*
* For the rest rules look so:
*
* It's OK to put directory into a group unless
* it has too many directories already (max_dirs) or
* it has too few free inodes left (min_inodes) or
* it has too few free blocks left (min_blocks) or
* it's already running too large debt (max_debt).
* Parent's group is preferred, if it doesn't satisfy these
* conditions we search cyclically through the rest. If none
* of the groups look good we just look for a group with more
* free inodes than average (starting at parent's group).
*
* Debt is incremented each time we allocate a directory and decremented
* when we allocate an inode, within 0--255.
*/
#define INODE_COST 64
#define BLOCK_COST 256
static int find_group_orlov(struct super_block *sb, struct inode *parent)
{
int parent_group = EXT2_I(parent)->i_block_group;
struct ext2_sb_info *sbi = EXT2_SB(sb);
struct ext2_super_block *es = sbi->s_es;
int ngroups = sbi->s_groups_count;
int inodes_per_group = EXT2_INODES_PER_GROUP(sb);
int freei;
int avefreei;
int free_blocks;
int avefreeb;
int blocks_per_dir;
int ndirs;
int max_debt, max_dirs, min_blocks, min_inodes;
int group = -1, i;
struct ext2_group_desc *desc;
freei = percpu_counter_read_positive(&sbi->s_freeinodes_counter);
avefreei = freei / ngroups;
free_blocks = percpu_counter_read_positive(&sbi->s_freeblocks_counter);
avefreeb = free_blocks / ngroups;
ndirs = percpu_counter_read_positive(&sbi->s_dirs_counter);
if ((parent == d_inode(sb->s_root)) ||
(EXT2_I(parent)->i_flags & EXT2_TOPDIR_FL)) {
struct ext2_group_desc *best_desc = NULL;
int best_ndir = inodes_per_group;
int best_group = -1;
group = prandom_u32();
parent_group = (unsigned)group % ngroups;
for (i = 0; i < ngroups; i++) {
group = (parent_group + i) % ngroups;
desc = ext2_get_group_desc (sb, group, NULL);
if (!desc || !desc->bg_free_inodes_count)
continue;
if (le16_to_cpu(desc->bg_used_dirs_count) >= best_ndir)
continue;
if (le16_to_cpu(desc->bg_free_inodes_count) < avefreei)
continue;
if (le16_to_cpu(desc->bg_free_blocks_count) < avefreeb)
continue;
best_group = group;
best_ndir = le16_to_cpu(desc->bg_used_dirs_count);
best_desc = desc;
}
if (best_group >= 0) {
desc = best_desc;
group = best_group;
goto found;
}
goto fallback;
}
if (ndirs == 0)
ndirs = 1; /* percpu_counters are approximate... */
blocks_per_dir = (le32_to_cpu(es->s_blocks_count)-free_blocks) / ndirs;
max_dirs = ndirs / ngroups + inodes_per_group / 16;
min_inodes = avefreei - inodes_per_group / 4;
min_blocks = avefreeb - EXT2_BLOCKS_PER_GROUP(sb) / 4;
max_debt = EXT2_BLOCKS_PER_GROUP(sb) / max(blocks_per_dir, BLOCK_COST);
if (max_debt * INODE_COST > inodes_per_group)
max_debt = inodes_per_group / INODE_COST;
if (max_debt > 255)
max_debt = 255;
if (max_debt == 0)
max_debt = 1;
for (i = 0; i < ngroups; i++) {
group = (parent_group + i) % ngroups;
desc = ext2_get_group_desc (sb, group, NULL);
if (!desc || !desc->bg_free_inodes_count)
continue;
if (sbi->s_debts[group] >= max_debt)
continue;
if (le16_to_cpu(desc->bg_used_dirs_count) >= max_dirs)
continue;
if (le16_to_cpu(desc->bg_free_inodes_count) < min_inodes)
continue;
if (le16_to_cpu(desc->bg_free_blocks_count) < min_blocks)
continue;
goto found;
}
fallback:
for (i = 0; i < ngroups; i++) {
group = (parent_group + i) % ngroups;
desc = ext2_get_group_desc (sb, group, NULL);
if (!desc || !desc->bg_free_inodes_count)
continue;
if (le16_to_cpu(desc->bg_free_inodes_count) >= avefreei)
goto found;
}
if (avefreei) {
/*
* The free-inodes counter is approximate, and for really small
* filesystems the above test can fail to find any blockgroups
*/
avefreei = 0;
goto fallback;
}
return -1;
found:
return group;
}
static int find_group_other(struct super_block *sb, struct inode *parent)
{
int parent_group = EXT2_I(parent)->i_block_group;
int ngroups = EXT2_SB(sb)->s_groups_count;
struct ext2_group_desc *desc;
int group, i;
/*
* Try to place the inode in its parent directory
*/
group = parent_group;
desc = ext2_get_group_desc (sb, group, NULL);
if (desc && le16_to_cpu(desc->bg_free_inodes_count) &&
le16_to_cpu(desc->bg_free_blocks_count))
goto found;
/*
* We're going to place this inode in a different blockgroup from its
* parent. We want to cause files in a common directory to all land in
* the same blockgroup. But we want files which are in a different
* directory which shares a blockgroup with our parent to land in a
* different blockgroup.
*
* So add our directory's i_ino into the starting point for the hash.
*/
group = (group + parent->i_ino) % ngroups;
/*
* Use a quadratic hash to find a group with a free inode and some
* free blocks.
*/
for (i = 1; i < ngroups; i <<= 1) {
group += i;
if (group >= ngroups)
group -= ngroups;
desc = ext2_get_group_desc (sb, group, NULL);
if (desc && le16_to_cpu(desc->bg_free_inodes_count) &&
le16_to_cpu(desc->bg_free_blocks_count))
goto found;
}
/*
* That failed: try linear search for a free inode, even if that group
* has no free blocks.
*/
group = parent_group;
for (i = 0; i < ngroups; i++) {
if (++group >= ngroups)
group = 0;
desc = ext2_get_group_desc (sb, group, NULL);
if (desc && le16_to_cpu(desc->bg_free_inodes_count))
goto found;
}
return -1;
found:
return group;
}
struct inode *ext2_new_inode(struct inode *dir, umode_t mode,
const struct qstr *qstr)
{
struct super_block *sb;
struct buffer_head *bitmap_bh = NULL;
struct buffer_head *bh2;
int group, i;
ino_t ino = 0;
struct inode * inode;
struct ext2_group_desc *gdp;
struct ext2_super_block *es;
struct ext2_inode_info *ei;
struct ext2_sb_info *sbi;
int err;
sb = dir->i_sb;
inode = new_inode(sb);
if (!inode)
return ERR_PTR(-ENOMEM);
ei = EXT2_I(inode);
sbi = EXT2_SB(sb);
es = sbi->s_es;
if (S_ISDIR(mode)) {
if (test_opt(sb, OLDALLOC))
group = find_group_dir(sb, dir);
else
group = find_group_orlov(sb, dir);
} else
group = find_group_other(sb, dir);
if (group == -1) {
err = -ENOSPC;
goto fail;
}
for (i = 0; i < sbi->s_groups_count; i++) {
gdp = ext2_get_group_desc(sb, group, &bh2);
if (!gdp) {
if (++group == sbi->s_groups_count)
group = 0;
continue;
}
brelse(bitmap_bh);
bitmap_bh = read_inode_bitmap(sb, group);
if (!bitmap_bh) {
err = -EIO;
goto fail;
}
ino = 0;
repeat_in_this_group:
ino = ext2_find_next_zero_bit((unsigned long *)bitmap_bh->b_data,
EXT2_INODES_PER_GROUP(sb), ino);
if (ino >= EXT2_INODES_PER_GROUP(sb)) {
/*
* Rare race: find_group_xx() decided that there were
* free inodes in this group, but by the time we tried
* to allocate one, they're all gone. This can also
* occur because the counters which find_group_orlov()
* uses are approximate. So just go and search the
* next block group.
*/
if (++group == sbi->s_groups_count)
group = 0;
continue;
}
if (ext2_set_bit_atomic(sb_bgl_lock(sbi, group),
ino, bitmap_bh->b_data)) {
/* we lost this inode */
if (++ino >= EXT2_INODES_PER_GROUP(sb)) {
/* this group is exhausted, try next group */
if (++group == sbi->s_groups_count)
group = 0;
continue;
}
/* try to find free inode in the same group */
goto repeat_in_this_group;
}
goto got;
}
/*
* Scanned all blockgroups.
*/
err = -ENOSPC;
goto fail;
got:
mark_buffer_dirty(bitmap_bh);
if (sb->s_flags & MS_SYNCHRONOUS)
sync_dirty_buffer(bitmap_bh);
brelse(bitmap_bh);
ino += group * EXT2_INODES_PER_GROUP(sb) + 1;
if (ino < EXT2_FIRST_INO(sb) || ino > le32_to_cpu(es->s_inodes_count)) {
ext2_error (sb, "ext2_new_inode",
"reserved inode or inode > inodes count - "
"block_group = %d,inode=%lu", group,
(unsigned long) ino);
err = -EIO;
goto fail;
}
percpu_counter_add(&sbi->s_freeinodes_counter, -1);
if (S_ISDIR(mode))
percpu_counter_inc(&sbi->s_dirs_counter);
spin_lock(sb_bgl_lock(sbi, group));
le16_add_cpu(&gdp->bg_free_inodes_count, -1);
if (S_ISDIR(mode)) {
if (sbi->s_debts[group] < 255)
sbi->s_debts[group]++;
le16_add_cpu(&gdp->bg_used_dirs_count, 1);
} else {
if (sbi->s_debts[group])
sbi->s_debts[group]--;
}
spin_unlock(sb_bgl_lock(sbi, group));
mark_buffer_dirty(bh2);
if (test_opt(sb, GRPID)) {
inode->i_mode = mode;
inode->i_uid = current_fsuid();
inode->i_gid = dir->i_gid;
} else
inode_init_owner(inode, dir, mode);
inode->i_ino = ino;
inode->i_blocks = 0;
inode->i_mtime = inode->i_atime = inode->i_ctime = current_time(inode);
memset(ei->i_data, 0, sizeof(ei->i_data));
ei->i_flags =
ext2_mask_flags(mode, EXT2_I(dir)->i_flags & EXT2_FL_INHERITED);
ei->i_faddr = 0;
ei->i_frag_no = 0;
ei->i_frag_size = 0;
ei->i_file_acl = 0;
ei->i_dir_acl = 0;
ei->i_dtime = 0;
ext2 reservations Val's cross-port of the ext3 reservations code into ext2. [mbligh@mbligh.org: Small type error for printk [akpm@linux-foundation.org: fix types, sync with ext3] [mbligh@mbligh.org: Bring ext2 reservations code in line with latest ext3] [akpm@linux-foundation.org: kill noisy printk] [akpm@linux-foundation.org: remember to dirty the gdp's block] [akpm@linux-foundation.org: cross-port the missed 5dea5176e5c32ef9f0d1a41d28427b3bf6881b3a] [akpm@linux-foundation.org: cross-port e6022603b9aa7d61d20b392e69edcdbbc1789969] [akpm@linux-foundation.org: Port the omitted 08fb306fe63d98eb86e3b16f4cc21816fa47f18e] [akpm@linux-foundation.org: Backport the missed 20acaa18d0c002fec180956f87adeb3f11f635a6] [akpm@linux-foundation.org: fixes] [cmm@us.ibm.com: fix reservation extension] [bunk@stusta.de: make ext2_get_blocks() static] [hugh@veritas.com: fix hang] [hugh@veritas.com: ext2_new_blocks should reset the reservation window size] [hugh@veritas.com: ext2 balloc: fix off-by-one against rsv_end] [hugh@veritas.com: grp_goal 0 is a genuine goal (unlike -1), so ext2_try_to_allocate_with_rsv should treat it as such] [hugh@veritas.com: rbtree usage cleanup] [pbadari@us.ibm.com: Fix for ext2 reservation] [bunk@kernel.org: remove fs/ext2/balloc.c:reserve_blocks()] [hugh@veritas.com: ext2 balloc: use io_error label] Cc: "Martin J. Bligh" <mbligh@mbligh.org> Cc: Valerie Henson <val_henson@linux.intel.com> Cc: Mingming Cao <cmm@us.ibm.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Hugh Dickins <hugh@veritas.com> Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-17 10:30:46 +04:00
ei->i_block_alloc_info = NULL;
ei->i_block_group = group;
ei->i_dir_start_lookup = 0;
ei->i_state = EXT2_STATE_NEW;
ext2_set_inode_flags(inode);
spin_lock(&sbi->s_next_gen_lock);
inode->i_generation = sbi->s_next_generation++;
spin_unlock(&sbi->s_next_gen_lock);
if (insert_inode_locked(inode) < 0) {
ext2_error(sb, "ext2_new_inode",
"inode number already in use - inode=%lu",
(unsigned long) ino);
err = -EIO;
goto fail;
}
err = dquot_initialize(inode);
if (err)
goto fail_drop;
err = dquot_alloc_inode(inode);
if (err)
goto fail_drop;
err = ext2_init_acl(inode, dir);
if (err)
goto fail_free_drop;
err = ext2_init_security(inode, dir, qstr);
if (err)
goto fail_free_drop;
mark_inode_dirty(inode);
ext2_debug("allocating inode %lu\n", inode->i_ino);
ext2_preread_inode(inode);
return inode;
fail_free_drop:
dquot_free_inode(inode);
fail_drop:
dquot_drop(inode);
inode->i_flags |= S_NOQUOTA;
clear_nlink(inode);
unlock_new_inode(inode);
iput(inode);
return ERR_PTR(err);
fail:
make_bad_inode(inode);
iput(inode);
return ERR_PTR(err);
}
unsigned long ext2_count_free_inodes (struct super_block * sb)
{
struct ext2_group_desc *desc;
unsigned long desc_count = 0;
int i;
#ifdef EXT2FS_DEBUG
struct ext2_super_block *es;
unsigned long bitmap_count = 0;
struct buffer_head *bitmap_bh = NULL;
es = EXT2_SB(sb)->s_es;
for (i = 0; i < EXT2_SB(sb)->s_groups_count; i++) {
unsigned x;
desc = ext2_get_group_desc (sb, i, NULL);
if (!desc)
continue;
desc_count += le16_to_cpu(desc->bg_free_inodes_count);
brelse(bitmap_bh);
bitmap_bh = read_inode_bitmap(sb, i);
if (!bitmap_bh)
continue;
x = ext2_count_free(bitmap_bh, EXT2_INODES_PER_GROUP(sb) / 8);
printk("group %d: stored = %d, counted = %u\n",
i, le16_to_cpu(desc->bg_free_inodes_count), x);
bitmap_count += x;
}
brelse(bitmap_bh);
printk("ext2_count_free_inodes: stored = %lu, computed = %lu, %lu\n",
(unsigned long)
percpu_counter_read(&EXT2_SB(sb)->s_freeinodes_counter),
desc_count, bitmap_count);
return desc_count;
#else
for (i = 0; i < EXT2_SB(sb)->s_groups_count; i++) {
desc = ext2_get_group_desc (sb, i, NULL);
if (!desc)
continue;
desc_count += le16_to_cpu(desc->bg_free_inodes_count);
}
return desc_count;
#endif
}
/* Called at mount-time, super-block is locked */
unsigned long ext2_count_dirs (struct super_block * sb)
{
unsigned long count = 0;
int i;
for (i = 0; i < EXT2_SB(sb)->s_groups_count; i++) {
struct ext2_group_desc *gdp = ext2_get_group_desc (sb, i, NULL);
if (!gdp)
continue;
count += le16_to_cpu(gdp->bg_used_dirs_count);
}
return count;
}