WSL2-Linux-Kernel/net/sunrpc/svcsock.c

1320 строки
35 KiB
C
Исходник Обычный вид История

/*
* linux/net/sunrpc/svcsock.c
*
* These are the RPC server socket internals.
*
* The server scheduling algorithm does not always distribute the load
* evenly when servicing a single client. May need to modify the
* svc_xprt_enqueue procedure...
*
* TCP support is largely untested and may be a little slow. The problem
* is that we currently do two separate recvfrom's, one for the 4-byte
* record length, and the second for the actual record. This could possibly
* be improved by always reading a minimum size of around 100 bytes and
* tucking any superfluous bytes away in a temporary store. Still, that
* leaves write requests out in the rain. An alternative may be to peek at
* the first skb in the queue, and if it matches the next TCP sequence
* number, to extract the record marker. Yuck.
*
* Copyright (C) 1995, 1996 Olaf Kirch <okir@monad.swb.de>
*/
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/fcntl.h>
#include <linux/net.h>
#include <linux/in.h>
#include <linux/inet.h>
#include <linux/udp.h>
#include <linux/tcp.h>
#include <linux/unistd.h>
#include <linux/slab.h>
#include <linux/netdevice.h>
#include <linux/skbuff.h>
#include <linux/file.h>
#include <linux/freezer.h>
#include <net/sock.h>
#include <net/checksum.h>
#include <net/ip.h>
#include <net/ipv6.h>
#include <net/tcp.h>
#include <net/tcp_states.h>
#include <asm/uaccess.h>
#include <asm/ioctls.h>
#include <linux/sunrpc/types.h>
#include <linux/sunrpc/clnt.h>
#include <linux/sunrpc/xdr.h>
#include <linux/sunrpc/msg_prot.h>
#include <linux/sunrpc/svcsock.h>
#include <linux/sunrpc/stats.h>
#define RPCDBG_FACILITY RPCDBG_SVCXPRT
static struct svc_sock *svc_setup_socket(struct svc_serv *, struct socket *,
int *errp, int flags);
static void svc_udp_data_ready(struct sock *, int);
static int svc_udp_recvfrom(struct svc_rqst *);
static int svc_udp_sendto(struct svc_rqst *);
static void svc_sock_detach(struct svc_xprt *);
static void svc_tcp_sock_detach(struct svc_xprt *);
static void svc_sock_free(struct svc_xprt *);
static struct svc_xprt *svc_create_socket(struct svc_serv *, int,
struct sockaddr *, int, int);
#ifdef CONFIG_DEBUG_LOCK_ALLOC
static struct lock_class_key svc_key[2];
static struct lock_class_key svc_slock_key[2];
static void svc_reclassify_socket(struct socket *sock)
{
struct sock *sk = sock->sk;
BUG_ON(sock_owned_by_user(sk));
switch (sk->sk_family) {
case AF_INET:
sock_lock_init_class_and_name(sk, "slock-AF_INET-NFSD",
&svc_slock_key[0],
"sk_xprt.xpt_lock-AF_INET-NFSD",
&svc_key[0]);
break;
case AF_INET6:
sock_lock_init_class_and_name(sk, "slock-AF_INET6-NFSD",
&svc_slock_key[1],
"sk_xprt.xpt_lock-AF_INET6-NFSD",
&svc_key[1]);
break;
default:
BUG();
}
}
#else
static void svc_reclassify_socket(struct socket *sock)
{
}
#endif
/*
* Release an skbuff after use
*/
static void svc_release_skb(struct svc_rqst *rqstp)
{
struct sk_buff *skb = rqstp->rq_xprt_ctxt;
if (skb) {
struct svc_sock *svsk =
container_of(rqstp->rq_xprt, struct svc_sock, sk_xprt);
rqstp->rq_xprt_ctxt = NULL;
dprintk("svc: service %p, releasing skb %p\n", rqstp, skb);
skb_free_datagram(svsk->sk_sk, skb);
}
}
union svc_pktinfo_u {
struct in_pktinfo pkti;
struct in6_pktinfo pkti6;
};
#define SVC_PKTINFO_SPACE \
CMSG_SPACE(sizeof(union svc_pktinfo_u))
static void svc_set_cmsg_data(struct svc_rqst *rqstp, struct cmsghdr *cmh)
{
struct svc_sock *svsk =
container_of(rqstp->rq_xprt, struct svc_sock, sk_xprt);
switch (svsk->sk_sk->sk_family) {
case AF_INET: {
struct in_pktinfo *pki = CMSG_DATA(cmh);
cmh->cmsg_level = SOL_IP;
cmh->cmsg_type = IP_PKTINFO;
pki->ipi_ifindex = 0;
pki->ipi_spec_dst.s_addr = rqstp->rq_daddr.addr.s_addr;
cmh->cmsg_len = CMSG_LEN(sizeof(*pki));
}
break;
case AF_INET6: {
struct in6_pktinfo *pki = CMSG_DATA(cmh);
cmh->cmsg_level = SOL_IPV6;
cmh->cmsg_type = IPV6_PKTINFO;
pki->ipi6_ifindex = 0;
ipv6_addr_copy(&pki->ipi6_addr,
&rqstp->rq_daddr.addr6);
cmh->cmsg_len = CMSG_LEN(sizeof(*pki));
}
break;
}
return;
}
/*
* Generic sendto routine
*/
static int svc_sendto(struct svc_rqst *rqstp, struct xdr_buf *xdr)
{
struct svc_sock *svsk =
container_of(rqstp->rq_xprt, struct svc_sock, sk_xprt);
struct socket *sock = svsk->sk_sock;
int slen;
union {
struct cmsghdr hdr;
long all[SVC_PKTINFO_SPACE / sizeof(long)];
} buffer;
struct cmsghdr *cmh = &buffer.hdr;
int len = 0;
int result;
int size;
struct page **ppage = xdr->pages;
size_t base = xdr->page_base;
unsigned int pglen = xdr->page_len;
unsigned int flags = MSG_MORE;
RPC_IFDEBUG(char buf[RPC_MAX_ADDRBUFLEN]);
slen = xdr->len;
if (rqstp->rq_prot == IPPROTO_UDP) {
struct msghdr msg = {
.msg_name = &rqstp->rq_addr,
.msg_namelen = rqstp->rq_addrlen,
.msg_control = cmh,
.msg_controllen = sizeof(buffer),
.msg_flags = MSG_MORE,
};
svc_set_cmsg_data(rqstp, cmh);
if (sock_sendmsg(sock, &msg, 0) < 0)
goto out;
}
/* send head */
if (slen == xdr->head[0].iov_len)
flags = 0;
len = kernel_sendpage(sock, rqstp->rq_respages[0], 0,
xdr->head[0].iov_len, flags);
if (len != xdr->head[0].iov_len)
goto out;
slen -= xdr->head[0].iov_len;
if (slen == 0)
goto out;
/* send page data */
size = PAGE_SIZE - base < pglen ? PAGE_SIZE - base : pglen;
while (pglen > 0) {
if (slen == size)
flags = 0;
result = kernel_sendpage(sock, *ppage, base, size, flags);
if (result > 0)
len += result;
if (result != size)
goto out;
slen -= size;
pglen -= size;
size = PAGE_SIZE < pglen ? PAGE_SIZE : pglen;
base = 0;
ppage++;
}
/* send tail */
if (xdr->tail[0].iov_len) {
result = kernel_sendpage(sock, rqstp->rq_respages[0],
((unsigned long)xdr->tail[0].iov_base)
& (PAGE_SIZE-1),
xdr->tail[0].iov_len, 0);
if (result > 0)
len += result;
}
out:
dprintk("svc: socket %p sendto([%p %Zu... ], %d) = %d (addr %s)\n",
svsk, xdr->head[0].iov_base, xdr->head[0].iov_len,
xdr->len, len, svc_print_addr(rqstp, buf, sizeof(buf)));
return len;
}
/*
* Report socket names for nfsdfs
*/
static int one_sock_name(char *buf, struct svc_sock *svsk)
{
int len;
switch(svsk->sk_sk->sk_family) {
case AF_INET:
len = sprintf(buf, "ipv4 %s %pI4 %d\n",
svsk->sk_sk->sk_protocol == IPPROTO_UDP ?
"udp" : "tcp",
&inet_sk(svsk->sk_sk)->rcv_saddr,
inet_sk(svsk->sk_sk)->num);
break;
default:
len = sprintf(buf, "*unknown-%d*\n",
svsk->sk_sk->sk_family);
}
return len;
}
int
svc_sock_names(char *buf, struct svc_serv *serv, char *toclose)
{
struct svc_sock *svsk, *closesk = NULL;
int len = 0;
if (!serv)
return 0;
spin_lock_bh(&serv->sv_lock);
list_for_each_entry(svsk, &serv->sv_permsocks, sk_xprt.xpt_list) {
int onelen = one_sock_name(buf+len, svsk);
if (toclose && strcmp(toclose, buf+len) == 0)
closesk = svsk;
else
len += onelen;
}
spin_unlock_bh(&serv->sv_lock);
if (closesk)
/* Should unregister with portmap, but you cannot
* unregister just one protocol...
*/
svc_close_xprt(&closesk->sk_xprt);
else if (toclose)
return -ENOENT;
return len;
}
EXPORT_SYMBOL(svc_sock_names);
/*
* Check input queue length
*/
static int svc_recv_available(struct svc_sock *svsk)
{
struct socket *sock = svsk->sk_sock;
int avail, err;
err = kernel_sock_ioctl(sock, TIOCINQ, (unsigned long) &avail);
return (err >= 0)? avail : err;
}
/*
* Generic recvfrom routine.
*/
static int svc_recvfrom(struct svc_rqst *rqstp, struct kvec *iov, int nr,
int buflen)
{
struct svc_sock *svsk =
container_of(rqstp->rq_xprt, struct svc_sock, sk_xprt);
struct msghdr msg = {
.msg_flags = MSG_DONTWAIT,
};
int len;
rqstp->rq_xprt_hlen = 0;
len = kernel_recvmsg(svsk->sk_sock, &msg, iov, nr, buflen,
msg.msg_flags);
dprintk("svc: socket %p recvfrom(%p, %Zu) = %d\n",
svsk, iov[0].iov_base, iov[0].iov_len, len);
return len;
}
/*
* Set socket snd and rcv buffer lengths
*/
static void svc_sock_setbufsize(struct socket *sock, unsigned int snd,
unsigned int rcv)
{
#if 0
mm_segment_t oldfs;
oldfs = get_fs(); set_fs(KERNEL_DS);
sock_setsockopt(sock, SOL_SOCKET, SO_SNDBUF,
(char*)&snd, sizeof(snd));
sock_setsockopt(sock, SOL_SOCKET, SO_RCVBUF,
(char*)&rcv, sizeof(rcv));
#else
/* sock_setsockopt limits use to sysctl_?mem_max,
* which isn't acceptable. Until that is made conditional
* on not having CAP_SYS_RESOURCE or similar, we go direct...
* DaveM said I could!
*/
lock_sock(sock->sk);
sock->sk->sk_sndbuf = snd * 2;
sock->sk->sk_rcvbuf = rcv * 2;
sock->sk->sk_userlocks |= SOCK_SNDBUF_LOCK|SOCK_RCVBUF_LOCK;
release_sock(sock->sk);
#endif
}
/*
* INET callback when data has been received on the socket.
*/
static void svc_udp_data_ready(struct sock *sk, int count)
{
struct svc_sock *svsk = (struct svc_sock *)sk->sk_user_data;
if (svsk) {
dprintk("svc: socket %p(inet %p), count=%d, busy=%d\n",
svsk, sk, count,
test_bit(XPT_BUSY, &svsk->sk_xprt.xpt_flags));
set_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags);
svc_xprt_enqueue(&svsk->sk_xprt);
}
if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
wake_up_interruptible(sk->sk_sleep);
}
/*
* INET callback when space is newly available on the socket.
*/
static void svc_write_space(struct sock *sk)
{
struct svc_sock *svsk = (struct svc_sock *)(sk->sk_user_data);
if (svsk) {
dprintk("svc: socket %p(inet %p), write_space busy=%d\n",
svsk, sk, test_bit(XPT_BUSY, &svsk->sk_xprt.xpt_flags));
svc_xprt_enqueue(&svsk->sk_xprt);
}
if (sk->sk_sleep && waitqueue_active(sk->sk_sleep)) {
dprintk("RPC svc_write_space: someone sleeping on %p\n",
svsk);
wake_up_interruptible(sk->sk_sleep);
}
}
svc: Move the sockaddr information to svc_xprt This patch moves the transport sockaddr to the svc_xprt structure. Convenience functions are added to set and get the local and remote addresses of a transport from the transport provider as well as determine the length of a sockaddr. A transport is responsible for setting the xpt_local and xpt_remote addresses in the svc_xprt structure as part of transport creation and xpo_accept processing. This cannot be done in a generic way and in fact varies between TCP, UDP and RDMA. A set of xpo_ functions (e.g. getlocalname, getremotename) could have been added but this would have resulted in additional caching and copying of the addresses around. Note that the xpt_local address should also be set on listening endpoints; for TCP/RDMA this is done as part of endpoint creation. For connected transports like TCP and RDMA, the addresses never change and can be set once and copied into the rqstp structure for each request. For UDP, however, the local and remote addresses may change for each request. In this case, the address information is obtained from the UDP recvmsg info and copied into the rqstp structure from there. A svc_xprt_local_port function was also added that returns the local port given a transport. This is used by svc_create_xprt when returning the port associated with a newly created transport, and later when creating a generic find transport service to check if a service is already listening on a given port. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Acked-by: Neil Brown <neilb@suse.de> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Greg Banks <gnb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-12-31 06:08:12 +03:00
/*
* Copy the UDP datagram's destination address to the rqstp structure.
* The 'destination' address in this case is the address to which the
* peer sent the datagram, i.e. our local address. For multihomed
* hosts, this can change from msg to msg. Note that only the IP
* address changes, the port number should remain the same.
*/
static void svc_udp_get_dest_address(struct svc_rqst *rqstp,
struct cmsghdr *cmh)
{
struct svc_sock *svsk =
container_of(rqstp->rq_xprt, struct svc_sock, sk_xprt);
switch (svsk->sk_sk->sk_family) {
case AF_INET: {
struct in_pktinfo *pki = CMSG_DATA(cmh);
rqstp->rq_daddr.addr.s_addr = pki->ipi_spec_dst.s_addr;
break;
}
case AF_INET6: {
struct in6_pktinfo *pki = CMSG_DATA(cmh);
ipv6_addr_copy(&rqstp->rq_daddr.addr6, &pki->ipi6_addr);
break;
}
}
}
/*
* Receive a datagram from a UDP socket.
*/
static int svc_udp_recvfrom(struct svc_rqst *rqstp)
{
struct svc_sock *svsk =
container_of(rqstp->rq_xprt, struct svc_sock, sk_xprt);
struct svc_serv *serv = svsk->sk_xprt.xpt_server;
struct sk_buff *skb;
union {
struct cmsghdr hdr;
long all[SVC_PKTINFO_SPACE / sizeof(long)];
} buffer;
struct cmsghdr *cmh = &buffer.hdr;
int err, len;
struct msghdr msg = {
.msg_name = svc_addr(rqstp),
.msg_control = cmh,
.msg_controllen = sizeof(buffer),
.msg_flags = MSG_DONTWAIT,
};
if (test_and_clear_bit(XPT_CHNGBUF, &svsk->sk_xprt.xpt_flags))
/* udp sockets need large rcvbuf as all pending
* requests are still in that buffer. sndbuf must
* also be large enough that there is enough space
* for one reply per thread. We count all threads
* rather than threads in a particular pool, which
* provides an upper bound on the number of threads
* which will access the socket.
*/
svc_sock_setbufsize(svsk->sk_sock,
(serv->sv_nrthreads+3) * serv->sv_max_mesg,
(serv->sv_nrthreads+3) * serv->sv_max_mesg);
clear_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags);
skb = NULL;
err = kernel_recvmsg(svsk->sk_sock, &msg, NULL,
0, 0, MSG_PEEK | MSG_DONTWAIT);
if (err >= 0)
skb = skb_recv_datagram(svsk->sk_sk, 0, 1, &err);
if (skb == NULL) {
if (err != -EAGAIN) {
/* possibly an icmp error */
dprintk("svc: recvfrom returned error %d\n", -err);
set_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags);
}
svc_xprt_received(&svsk->sk_xprt);
return -EAGAIN;
}
svc: Move the sockaddr information to svc_xprt This patch moves the transport sockaddr to the svc_xprt structure. Convenience functions are added to set and get the local and remote addresses of a transport from the transport provider as well as determine the length of a sockaddr. A transport is responsible for setting the xpt_local and xpt_remote addresses in the svc_xprt structure as part of transport creation and xpo_accept processing. This cannot be done in a generic way and in fact varies between TCP, UDP and RDMA. A set of xpo_ functions (e.g. getlocalname, getremotename) could have been added but this would have resulted in additional caching and copying of the addresses around. Note that the xpt_local address should also be set on listening endpoints; for TCP/RDMA this is done as part of endpoint creation. For connected transports like TCP and RDMA, the addresses never change and can be set once and copied into the rqstp structure for each request. For UDP, however, the local and remote addresses may change for each request. In this case, the address information is obtained from the UDP recvmsg info and copied into the rqstp structure from there. A svc_xprt_local_port function was also added that returns the local port given a transport. This is used by svc_create_xprt when returning the port associated with a newly created transport, and later when creating a generic find transport service to check if a service is already listening on a given port. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Acked-by: Neil Brown <neilb@suse.de> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Greg Banks <gnb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-12-31 06:08:12 +03:00
len = svc_addr_len(svc_addr(rqstp));
if (len < 0)
return len;
rqstp->rq_addrlen = len;
if (skb->tstamp.tv64 == 0) {
skb->tstamp = ktime_get_real();
/* Don't enable netstamp, sunrpc doesn't
need that much accuracy */
}
svsk->sk_sk->sk_stamp = skb->tstamp;
set_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags); /* there may be more data... */
/*
* Maybe more packets - kick another thread ASAP.
*/
svc_xprt_received(&svsk->sk_xprt);
len = skb->len - sizeof(struct udphdr);
rqstp->rq_arg.len = len;
rqstp->rq_prot = IPPROTO_UDP;
if (cmh->cmsg_level != IPPROTO_IP ||
cmh->cmsg_type != IP_PKTINFO) {
if (net_ratelimit())
printk("rpcsvc: received unknown control message:"
"%d/%d\n",
cmh->cmsg_level, cmh->cmsg_type);
skb_free_datagram(svsk->sk_sk, skb);
return 0;
}
svc_udp_get_dest_address(rqstp, cmh);
if (skb_is_nonlinear(skb)) {
/* we have to copy */
local_bh_disable();
if (csum_partial_copy_to_xdr(&rqstp->rq_arg, skb)) {
local_bh_enable();
/* checksum error */
skb_free_datagram(svsk->sk_sk, skb);
return 0;
}
local_bh_enable();
skb_free_datagram(svsk->sk_sk, skb);
} else {
/* we can use it in-place */
rqstp->rq_arg.head[0].iov_base = skb->data +
sizeof(struct udphdr);
rqstp->rq_arg.head[0].iov_len = len;
if (skb_checksum_complete(skb)) {
skb_free_datagram(svsk->sk_sk, skb);
return 0;
}
rqstp->rq_xprt_ctxt = skb;
}
rqstp->rq_arg.page_base = 0;
if (len <= rqstp->rq_arg.head[0].iov_len) {
rqstp->rq_arg.head[0].iov_len = len;
rqstp->rq_arg.page_len = 0;
rqstp->rq_respages = rqstp->rq_pages+1;
} else {
rqstp->rq_arg.page_len = len - rqstp->rq_arg.head[0].iov_len;
rqstp->rq_respages = rqstp->rq_pages + 1 +
DIV_ROUND_UP(rqstp->rq_arg.page_len, PAGE_SIZE);
}
if (serv->sv_stats)
serv->sv_stats->netudpcnt++;
return len;
}
static int
svc_udp_sendto(struct svc_rqst *rqstp)
{
int error;
error = svc_sendto(rqstp, &rqstp->rq_res);
if (error == -ECONNREFUSED)
/* ICMP error on earlier request. */
error = svc_sendto(rqstp, &rqstp->rq_res);
return error;
}
static void svc_udp_prep_reply_hdr(struct svc_rqst *rqstp)
{
}
static int svc_udp_has_wspace(struct svc_xprt *xprt)
{
struct svc_sock *svsk = container_of(xprt, struct svc_sock, sk_xprt);
struct svc_serv *serv = xprt->xpt_server;
unsigned long required;
/*
* Set the SOCK_NOSPACE flag before checking the available
* sock space.
*/
set_bit(SOCK_NOSPACE, &svsk->sk_sock->flags);
required = atomic_read(&svsk->sk_xprt.xpt_reserved) + serv->sv_max_mesg;
if (required*2 > sock_wspace(svsk->sk_sk))
return 0;
clear_bit(SOCK_NOSPACE, &svsk->sk_sock->flags);
return 1;
}
static struct svc_xprt *svc_udp_accept(struct svc_xprt *xprt)
{
BUG();
return NULL;
}
static struct svc_xprt *svc_udp_create(struct svc_serv *serv,
struct sockaddr *sa, int salen,
int flags)
{
return svc_create_socket(serv, IPPROTO_UDP, sa, salen, flags);
}
static struct svc_xprt_ops svc_udp_ops = {
.xpo_create = svc_udp_create,
.xpo_recvfrom = svc_udp_recvfrom,
.xpo_sendto = svc_udp_sendto,
.xpo_release_rqst = svc_release_skb,
.xpo_detach = svc_sock_detach,
.xpo_free = svc_sock_free,
.xpo_prep_reply_hdr = svc_udp_prep_reply_hdr,
.xpo_has_wspace = svc_udp_has_wspace,
.xpo_accept = svc_udp_accept,
};
static struct svc_xprt_class svc_udp_class = {
.xcl_name = "udp",
.xcl_owner = THIS_MODULE,
.xcl_ops = &svc_udp_ops,
.xcl_max_payload = RPCSVC_MAXPAYLOAD_UDP,
};
static void svc_udp_init(struct svc_sock *svsk, struct svc_serv *serv)
{
int one = 1;
mm_segment_t oldfs;
svc_xprt_init(&svc_udp_class, &svsk->sk_xprt, serv);
clear_bit(XPT_CACHE_AUTH, &svsk->sk_xprt.xpt_flags);
svsk->sk_sk->sk_data_ready = svc_udp_data_ready;
svsk->sk_sk->sk_write_space = svc_write_space;
/* initialise setting must have enough space to
* receive and respond to one request.
* svc_udp_recvfrom will re-adjust if necessary
*/
svc_sock_setbufsize(svsk->sk_sock,
3 * svsk->sk_xprt.xpt_server->sv_max_mesg,
3 * svsk->sk_xprt.xpt_server->sv_max_mesg);
/* data might have come in before data_ready set up */
set_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags);
set_bit(XPT_CHNGBUF, &svsk->sk_xprt.xpt_flags);
oldfs = get_fs();
set_fs(KERNEL_DS);
/* make sure we get destination address info */
svsk->sk_sock->ops->setsockopt(svsk->sk_sock, IPPROTO_IP, IP_PKTINFO,
(char __user *)&one, sizeof(one));
set_fs(oldfs);
}
/*
* A data_ready event on a listening socket means there's a connection
* pending. Do not use state_change as a substitute for it.
*/
static void svc_tcp_listen_data_ready(struct sock *sk, int count_unused)
{
struct svc_sock *svsk = (struct svc_sock *)sk->sk_user_data;
dprintk("svc: socket %p TCP (listen) state change %d\n",
sk, sk->sk_state);
/*
* This callback may called twice when a new connection
* is established as a child socket inherits everything
* from a parent LISTEN socket.
* 1) data_ready method of the parent socket will be called
* when one of child sockets become ESTABLISHED.
* 2) data_ready method of the child socket may be called
* when it receives data before the socket is accepted.
* In case of 2, we should ignore it silently.
*/
if (sk->sk_state == TCP_LISTEN) {
if (svsk) {
set_bit(XPT_CONN, &svsk->sk_xprt.xpt_flags);
svc_xprt_enqueue(&svsk->sk_xprt);
} else
printk("svc: socket %p: no user data\n", sk);
}
if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
wake_up_interruptible_all(sk->sk_sleep);
}
/*
* A state change on a connected socket means it's dying or dead.
*/
static void svc_tcp_state_change(struct sock *sk)
{
struct svc_sock *svsk = (struct svc_sock *)sk->sk_user_data;
dprintk("svc: socket %p TCP (connected) state change %d (svsk %p)\n",
sk, sk->sk_state, sk->sk_user_data);
if (!svsk)
printk("svc: socket %p: no user data\n", sk);
else {
set_bit(XPT_CLOSE, &svsk->sk_xprt.xpt_flags);
svc_xprt_enqueue(&svsk->sk_xprt);
}
if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
wake_up_interruptible_all(sk->sk_sleep);
}
static void svc_tcp_data_ready(struct sock *sk, int count)
{
struct svc_sock *svsk = (struct svc_sock *)sk->sk_user_data;
dprintk("svc: socket %p TCP data ready (svsk %p)\n",
sk, sk->sk_user_data);
if (svsk) {
set_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags);
svc_xprt_enqueue(&svsk->sk_xprt);
}
if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
wake_up_interruptible(sk->sk_sleep);
}
/*
* Accept a TCP connection
*/
static struct svc_xprt *svc_tcp_accept(struct svc_xprt *xprt)
{
struct svc_sock *svsk = container_of(xprt, struct svc_sock, sk_xprt);
struct sockaddr_storage addr;
struct sockaddr *sin = (struct sockaddr *) &addr;
struct svc_serv *serv = svsk->sk_xprt.xpt_server;
struct socket *sock = svsk->sk_sock;
struct socket *newsock;
struct svc_sock *newsvsk;
int err, slen;
RPC_IFDEBUG(char buf[RPC_MAX_ADDRBUFLEN]);
dprintk("svc: tcp_accept %p sock %p\n", svsk, sock);
if (!sock)
return NULL;
clear_bit(XPT_CONN, &svsk->sk_xprt.xpt_flags);
err = kernel_accept(sock, &newsock, O_NONBLOCK);
if (err < 0) {
if (err == -ENOMEM)
printk(KERN_WARNING "%s: no more sockets!\n",
serv->sv_name);
else if (err != -EAGAIN && net_ratelimit())
printk(KERN_WARNING "%s: accept failed (err %d)!\n",
serv->sv_name, -err);
return NULL;
}
set_bit(XPT_CONN, &svsk->sk_xprt.xpt_flags);
err = kernel_getpeername(newsock, sin, &slen);
if (err < 0) {
if (net_ratelimit())
printk(KERN_WARNING "%s: peername failed (err %d)!\n",
serv->sv_name, -err);
goto failed; /* aborted connection or whatever */
}
/* Ideally, we would want to reject connections from unauthorized
* hosts here, but when we get encryption, the IP of the host won't
* tell us anything. For now just warn about unpriv connections.
*/
if (!svc_port_is_privileged(sin)) {
dprintk(KERN_WARNING
"%s: connect from unprivileged port: %s\n",
serv->sv_name,
__svc_print_addr(sin, buf, sizeof(buf)));
}
dprintk("%s: connect from %s\n", serv->sv_name,
__svc_print_addr(sin, buf, sizeof(buf)));
/* make sure that a write doesn't block forever when
* low on memory
*/
newsock->sk->sk_sndtimeo = HZ*30;
if (!(newsvsk = svc_setup_socket(serv, newsock, &err,
(SVC_SOCK_ANONYMOUS | SVC_SOCK_TEMPORARY))))
goto failed;
svc: Move the sockaddr information to svc_xprt This patch moves the transport sockaddr to the svc_xprt structure. Convenience functions are added to set and get the local and remote addresses of a transport from the transport provider as well as determine the length of a sockaddr. A transport is responsible for setting the xpt_local and xpt_remote addresses in the svc_xprt structure as part of transport creation and xpo_accept processing. This cannot be done in a generic way and in fact varies between TCP, UDP and RDMA. A set of xpo_ functions (e.g. getlocalname, getremotename) could have been added but this would have resulted in additional caching and copying of the addresses around. Note that the xpt_local address should also be set on listening endpoints; for TCP/RDMA this is done as part of endpoint creation. For connected transports like TCP and RDMA, the addresses never change and can be set once and copied into the rqstp structure for each request. For UDP, however, the local and remote addresses may change for each request. In this case, the address information is obtained from the UDP recvmsg info and copied into the rqstp structure from there. A svc_xprt_local_port function was also added that returns the local port given a transport. This is used by svc_create_xprt when returning the port associated with a newly created transport, and later when creating a generic find transport service to check if a service is already listening on a given port. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Acked-by: Neil Brown <neilb@suse.de> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Greg Banks <gnb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-12-31 06:08:12 +03:00
svc_xprt_set_remote(&newsvsk->sk_xprt, sin, slen);
err = kernel_getsockname(newsock, sin, &slen);
if (unlikely(err < 0)) {
dprintk("svc_tcp_accept: kernel_getsockname error %d\n", -err);
slen = offsetof(struct sockaddr, sa_data);
}
svc: Move the sockaddr information to svc_xprt This patch moves the transport sockaddr to the svc_xprt structure. Convenience functions are added to set and get the local and remote addresses of a transport from the transport provider as well as determine the length of a sockaddr. A transport is responsible for setting the xpt_local and xpt_remote addresses in the svc_xprt structure as part of transport creation and xpo_accept processing. This cannot be done in a generic way and in fact varies between TCP, UDP and RDMA. A set of xpo_ functions (e.g. getlocalname, getremotename) could have been added but this would have resulted in additional caching and copying of the addresses around. Note that the xpt_local address should also be set on listening endpoints; for TCP/RDMA this is done as part of endpoint creation. For connected transports like TCP and RDMA, the addresses never change and can be set once and copied into the rqstp structure for each request. For UDP, however, the local and remote addresses may change for each request. In this case, the address information is obtained from the UDP recvmsg info and copied into the rqstp structure from there. A svc_xprt_local_port function was also added that returns the local port given a transport. This is used by svc_create_xprt when returning the port associated with a newly created transport, and later when creating a generic find transport service to check if a service is already listening on a given port. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Acked-by: Neil Brown <neilb@suse.de> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Greg Banks <gnb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-12-31 06:08:12 +03:00
svc_xprt_set_local(&newsvsk->sk_xprt, sin, slen);
if (serv->sv_stats)
serv->sv_stats->nettcpconn++;
return &newsvsk->sk_xprt;
failed:
sock_release(newsock);
return NULL;
}
/*
* Receive data from a TCP socket.
*/
static int svc_tcp_recvfrom(struct svc_rqst *rqstp)
{
struct svc_sock *svsk =
container_of(rqstp->rq_xprt, struct svc_sock, sk_xprt);
struct svc_serv *serv = svsk->sk_xprt.xpt_server;
int len;
struct kvec *vec;
int pnum, vlen;
dprintk("svc: tcp_recv %p data %d conn %d close %d\n",
svsk, test_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags),
test_bit(XPT_CONN, &svsk->sk_xprt.xpt_flags),
test_bit(XPT_CLOSE, &svsk->sk_xprt.xpt_flags));
if (test_and_clear_bit(XPT_CHNGBUF, &svsk->sk_xprt.xpt_flags))
/* sndbuf needs to have room for one request
* per thread, otherwise we can stall even when the
* network isn't a bottleneck.
*
* We count all threads rather than threads in a
* particular pool, which provides an upper bound
* on the number of threads which will access the socket.
*
* rcvbuf just needs to be able to hold a few requests.
* Normally they will be removed from the queue
* as soon a a complete request arrives.
*/
svc_sock_setbufsize(svsk->sk_sock,
(serv->sv_nrthreads+3) * serv->sv_max_mesg,
3 * serv->sv_max_mesg);
clear_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags);
/* Receive data. If we haven't got the record length yet, get
* the next four bytes. Otherwise try to gobble up as much as
* possible up to the complete record length.
*/
if (svsk->sk_tcplen < sizeof(rpc_fraghdr)) {
int want = sizeof(rpc_fraghdr) - svsk->sk_tcplen;
struct kvec iov;
iov.iov_base = ((char *) &svsk->sk_reclen) + svsk->sk_tcplen;
iov.iov_len = want;
if ((len = svc_recvfrom(rqstp, &iov, 1, want)) < 0)
goto error;
svsk->sk_tcplen += len;
if (len < want) {
dprintk("svc: short recvfrom while reading record "
"length (%d of %d)\n", len, want);
svc_xprt_received(&svsk->sk_xprt);
return -EAGAIN; /* record header not complete */
}
svsk->sk_reclen = ntohl(svsk->sk_reclen);
if (!(svsk->sk_reclen & RPC_LAST_STREAM_FRAGMENT)) {
/* FIXME: technically, a record can be fragmented,
* and non-terminal fragments will not have the top
* bit set in the fragment length header.
* But apparently no known nfs clients send fragmented
* records. */
if (net_ratelimit())
printk(KERN_NOTICE "RPC: multiple fragments "
"per record not supported\n");
goto err_delete;
}
svsk->sk_reclen &= RPC_FRAGMENT_SIZE_MASK;
dprintk("svc: TCP record, %d bytes\n", svsk->sk_reclen);
if (svsk->sk_reclen > serv->sv_max_mesg) {
if (net_ratelimit())
printk(KERN_NOTICE "RPC: "
"fragment too large: 0x%08lx\n",
(unsigned long)svsk->sk_reclen);
goto err_delete;
}
}
/* Check whether enough data is available */
len = svc_recv_available(svsk);
if (len < 0)
goto error;
if (len < svsk->sk_reclen) {
dprintk("svc: incomplete TCP record (%d of %d)\n",
len, svsk->sk_reclen);
svc_xprt_received(&svsk->sk_xprt);
return -EAGAIN; /* record not complete */
}
len = svsk->sk_reclen;
set_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags);
vec = rqstp->rq_vec;
vec[0] = rqstp->rq_arg.head[0];
vlen = PAGE_SIZE;
pnum = 1;
while (vlen < len) {
vec[pnum].iov_base = page_address(rqstp->rq_pages[pnum]);
vec[pnum].iov_len = PAGE_SIZE;
pnum++;
vlen += PAGE_SIZE;
}
rqstp->rq_respages = &rqstp->rq_pages[pnum];
/* Now receive data */
len = svc_recvfrom(rqstp, vec, pnum, len);
if (len < 0)
goto error;
dprintk("svc: TCP complete record (%d bytes)\n", len);
rqstp->rq_arg.len = len;
rqstp->rq_arg.page_base = 0;
if (len <= rqstp->rq_arg.head[0].iov_len) {
rqstp->rq_arg.head[0].iov_len = len;
rqstp->rq_arg.page_len = 0;
} else {
rqstp->rq_arg.page_len = len - rqstp->rq_arg.head[0].iov_len;
}
rqstp->rq_xprt_ctxt = NULL;
rqstp->rq_prot = IPPROTO_TCP;
/* Reset TCP read info */
svsk->sk_reclen = 0;
svsk->sk_tcplen = 0;
svc: Move the sockaddr information to svc_xprt This patch moves the transport sockaddr to the svc_xprt structure. Convenience functions are added to set and get the local and remote addresses of a transport from the transport provider as well as determine the length of a sockaddr. A transport is responsible for setting the xpt_local and xpt_remote addresses in the svc_xprt structure as part of transport creation and xpo_accept processing. This cannot be done in a generic way and in fact varies between TCP, UDP and RDMA. A set of xpo_ functions (e.g. getlocalname, getremotename) could have been added but this would have resulted in additional caching and copying of the addresses around. Note that the xpt_local address should also be set on listening endpoints; for TCP/RDMA this is done as part of endpoint creation. For connected transports like TCP and RDMA, the addresses never change and can be set once and copied into the rqstp structure for each request. For UDP, however, the local and remote addresses may change for each request. In this case, the address information is obtained from the UDP recvmsg info and copied into the rqstp structure from there. A svc_xprt_local_port function was also added that returns the local port given a transport. This is used by svc_create_xprt when returning the port associated with a newly created transport, and later when creating a generic find transport service to check if a service is already listening on a given port. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Acked-by: Neil Brown <neilb@suse.de> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Greg Banks <gnb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-12-31 06:08:12 +03:00
svc_xprt_copy_addrs(rqstp, &svsk->sk_xprt);
svc_xprt_received(&svsk->sk_xprt);
if (serv->sv_stats)
serv->sv_stats->nettcpcnt++;
return len;
err_delete:
set_bit(XPT_CLOSE, &svsk->sk_xprt.xpt_flags);
return -EAGAIN;
error:
if (len == -EAGAIN) {
dprintk("RPC: TCP recvfrom got EAGAIN\n");
svc_xprt_received(&svsk->sk_xprt);
} else {
printk(KERN_NOTICE "%s: recvfrom returned errno %d\n",
svsk->sk_xprt.xpt_server->sv_name, -len);
goto err_delete;
}
return len;
}
/*
* Send out data on TCP socket.
*/
static int svc_tcp_sendto(struct svc_rqst *rqstp)
{
struct xdr_buf *xbufp = &rqstp->rq_res;
int sent;
__be32 reclen;
/* Set up the first element of the reply kvec.
* Any other kvecs that may be in use have been taken
* care of by the server implementation itself.
*/
reclen = htonl(0x80000000|((xbufp->len ) - 4));
memcpy(xbufp->head[0].iov_base, &reclen, 4);
if (test_bit(XPT_DEAD, &rqstp->rq_xprt->xpt_flags))
return -ENOTCONN;
sent = svc_sendto(rqstp, &rqstp->rq_res);
if (sent != xbufp->len) {
printk(KERN_NOTICE
"rpc-srv/tcp: %s: %s %d when sending %d bytes "
"- shutting down socket\n",
rqstp->rq_xprt->xpt_server->sv_name,
(sent<0)?"got error":"sent only",
sent, xbufp->len);
set_bit(XPT_CLOSE, &rqstp->rq_xprt->xpt_flags);
svc_xprt_enqueue(rqstp->rq_xprt);
sent = -EAGAIN;
}
return sent;
}
/*
* Setup response header. TCP has a 4B record length field.
*/
static void svc_tcp_prep_reply_hdr(struct svc_rqst *rqstp)
{
struct kvec *resv = &rqstp->rq_res.head[0];
/* tcp needs a space for the record length... */
svc_putnl(resv, 0);
}
static int svc_tcp_has_wspace(struct svc_xprt *xprt)
{
struct svc_sock *svsk = container_of(xprt, struct svc_sock, sk_xprt);
struct svc_serv *serv = svsk->sk_xprt.xpt_server;
int required;
int wspace;
/*
* Set the SOCK_NOSPACE flag before checking the available
* sock space.
*/
set_bit(SOCK_NOSPACE, &svsk->sk_sock->flags);
required = atomic_read(&svsk->sk_xprt.xpt_reserved) + serv->sv_max_mesg;
wspace = sk_stream_wspace(svsk->sk_sk);
if (wspace < sk_stream_min_wspace(svsk->sk_sk))
return 0;
if (required * 2 > wspace)
return 0;
clear_bit(SOCK_NOSPACE, &svsk->sk_sock->flags);
return 1;
}
static struct svc_xprt *svc_tcp_create(struct svc_serv *serv,
struct sockaddr *sa, int salen,
int flags)
{
return svc_create_socket(serv, IPPROTO_TCP, sa, salen, flags);
}
static struct svc_xprt_ops svc_tcp_ops = {
.xpo_create = svc_tcp_create,
.xpo_recvfrom = svc_tcp_recvfrom,
.xpo_sendto = svc_tcp_sendto,
.xpo_release_rqst = svc_release_skb,
.xpo_detach = svc_tcp_sock_detach,
.xpo_free = svc_sock_free,
.xpo_prep_reply_hdr = svc_tcp_prep_reply_hdr,
.xpo_has_wspace = svc_tcp_has_wspace,
.xpo_accept = svc_tcp_accept,
};
static struct svc_xprt_class svc_tcp_class = {
.xcl_name = "tcp",
.xcl_owner = THIS_MODULE,
.xcl_ops = &svc_tcp_ops,
.xcl_max_payload = RPCSVC_MAXPAYLOAD_TCP,
};
void svc_init_xprt_sock(void)
{
svc_reg_xprt_class(&svc_tcp_class);
svc_reg_xprt_class(&svc_udp_class);
}
void svc_cleanup_xprt_sock(void)
{
svc_unreg_xprt_class(&svc_tcp_class);
svc_unreg_xprt_class(&svc_udp_class);
}
static void svc_tcp_init(struct svc_sock *svsk, struct svc_serv *serv)
{
struct sock *sk = svsk->sk_sk;
svc_xprt_init(&svc_tcp_class, &svsk->sk_xprt, serv);
set_bit(XPT_CACHE_AUTH, &svsk->sk_xprt.xpt_flags);
if (sk->sk_state == TCP_LISTEN) {
dprintk("setting up TCP socket for listening\n");
set_bit(XPT_LISTENER, &svsk->sk_xprt.xpt_flags);
sk->sk_data_ready = svc_tcp_listen_data_ready;
set_bit(XPT_CONN, &svsk->sk_xprt.xpt_flags);
} else {
dprintk("setting up TCP socket for reading\n");
sk->sk_state_change = svc_tcp_state_change;
sk->sk_data_ready = svc_tcp_data_ready;
sk->sk_write_space = svc_write_space;
svsk->sk_reclen = 0;
svsk->sk_tcplen = 0;
tcp_sk(sk)->nonagle |= TCP_NAGLE_OFF;
/* initialise setting must have enough space to
* receive and respond to one request.
* svc_tcp_recvfrom will re-adjust if necessary
*/
svc_sock_setbufsize(svsk->sk_sock,
3 * svsk->sk_xprt.xpt_server->sv_max_mesg,
3 * svsk->sk_xprt.xpt_server->sv_max_mesg);
set_bit(XPT_CHNGBUF, &svsk->sk_xprt.xpt_flags);
set_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags);
if (sk->sk_state != TCP_ESTABLISHED)
set_bit(XPT_CLOSE, &svsk->sk_xprt.xpt_flags);
}
}
void svc_sock_update_bufs(struct svc_serv *serv)
{
/*
* The number of server threads has changed. Update
* rcvbuf and sndbuf accordingly on all sockets
*/
struct list_head *le;
spin_lock_bh(&serv->sv_lock);
list_for_each(le, &serv->sv_permsocks) {
struct svc_sock *svsk =
list_entry(le, struct svc_sock, sk_xprt.xpt_list);
set_bit(XPT_CHNGBUF, &svsk->sk_xprt.xpt_flags);
}
list_for_each(le, &serv->sv_tempsocks) {
struct svc_sock *svsk =
list_entry(le, struct svc_sock, sk_xprt.xpt_list);
set_bit(XPT_CHNGBUF, &svsk->sk_xprt.xpt_flags);
}
spin_unlock_bh(&serv->sv_lock);
}
EXPORT_SYMBOL(svc_sock_update_bufs);
/*
* Initialize socket for RPC use and create svc_sock struct
* XXX: May want to setsockopt SO_SNDBUF and SO_RCVBUF.
*/
static struct svc_sock *svc_setup_socket(struct svc_serv *serv,
struct socket *sock,
int *errp, int flags)
{
struct svc_sock *svsk;
struct sock *inet;
int pmap_register = !(flags & SVC_SOCK_ANONYMOUS);
int val;
dprintk("svc: svc_setup_socket %p\n", sock);
if (!(svsk = kzalloc(sizeof(*svsk), GFP_KERNEL))) {
*errp = -ENOMEM;
return NULL;
}
inet = sock->sk;
/* Register socket with portmapper */
if (*errp >= 0 && pmap_register)
*errp = svc_register(serv, inet->sk_protocol,
ntohs(inet_sk(inet)->sport));
if (*errp < 0) {
kfree(svsk);
return NULL;
}
inet->sk_user_data = svsk;
svsk->sk_sock = sock;
svsk->sk_sk = inet;
svsk->sk_ostate = inet->sk_state_change;
svsk->sk_odata = inet->sk_data_ready;
svsk->sk_owspace = inet->sk_write_space;
/* Initialize the socket */
if (sock->type == SOCK_DGRAM)
svc_udp_init(svsk, serv);
else
svc_tcp_init(svsk, serv);
/*
* We start one listener per sv_serv. We want AF_INET
* requests to be automatically shunted to our AF_INET6
* listener using a mapped IPv4 address. Make sure
* no-one starts an equivalent IPv4 listener, which
* would steal our incoming connections.
*/
val = 0;
if (serv->sv_family == AF_INET6)
kernel_setsockopt(sock, SOL_IPV6, IPV6_V6ONLY,
(char *)&val, sizeof(val));
dprintk("svc: svc_setup_socket created %p (inet %p)\n",
svsk, svsk->sk_sk);
return svsk;
}
int svc_addsock(struct svc_serv *serv,
int fd,
char *name_return)
{
int err = 0;
struct socket *so = sockfd_lookup(fd, &err);
struct svc_sock *svsk = NULL;
if (!so)
return err;
if (so->sk->sk_family != AF_INET)
err = -EAFNOSUPPORT;
else if (so->sk->sk_protocol != IPPROTO_TCP &&
so->sk->sk_protocol != IPPROTO_UDP)
err = -EPROTONOSUPPORT;
else if (so->state > SS_UNCONNECTED)
err = -EISCONN;
else {
if (!try_module_get(THIS_MODULE))
err = -ENOENT;
else
svsk = svc_setup_socket(serv, so, &err,
SVC_SOCK_DEFAULTS);
if (svsk) {
svc: Move the sockaddr information to svc_xprt This patch moves the transport sockaddr to the svc_xprt structure. Convenience functions are added to set and get the local and remote addresses of a transport from the transport provider as well as determine the length of a sockaddr. A transport is responsible for setting the xpt_local and xpt_remote addresses in the svc_xprt structure as part of transport creation and xpo_accept processing. This cannot be done in a generic way and in fact varies between TCP, UDP and RDMA. A set of xpo_ functions (e.g. getlocalname, getremotename) could have been added but this would have resulted in additional caching and copying of the addresses around. Note that the xpt_local address should also be set on listening endpoints; for TCP/RDMA this is done as part of endpoint creation. For connected transports like TCP and RDMA, the addresses never change and can be set once and copied into the rqstp structure for each request. For UDP, however, the local and remote addresses may change for each request. In this case, the address information is obtained from the UDP recvmsg info and copied into the rqstp structure from there. A svc_xprt_local_port function was also added that returns the local port given a transport. This is used by svc_create_xprt when returning the port associated with a newly created transport, and later when creating a generic find transport service to check if a service is already listening on a given port. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Acked-by: Neil Brown <neilb@suse.de> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Greg Banks <gnb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-12-31 06:08:12 +03:00
struct sockaddr_storage addr;
struct sockaddr *sin = (struct sockaddr *)&addr;
int salen;
if (kernel_getsockname(svsk->sk_sock, sin, &salen) == 0)
svc_xprt_set_local(&svsk->sk_xprt, sin, salen);
clear_bit(XPT_TEMP, &svsk->sk_xprt.xpt_flags);
spin_lock_bh(&serv->sv_lock);
list_add(&svsk->sk_xprt.xpt_list, &serv->sv_permsocks);
spin_unlock_bh(&serv->sv_lock);
svc_xprt_received(&svsk->sk_xprt);
err = 0;
} else
module_put(THIS_MODULE);
}
if (err) {
sockfd_put(so);
return err;
}
return one_sock_name(name_return, svsk);
}
EXPORT_SYMBOL_GPL(svc_addsock);
/*
* Create socket for RPC service.
*/
static struct svc_xprt *svc_create_socket(struct svc_serv *serv,
int protocol,
struct sockaddr *sin, int len,
int flags)
{
struct svc_sock *svsk;
struct socket *sock;
int error;
int type;
svc: Move the sockaddr information to svc_xprt This patch moves the transport sockaddr to the svc_xprt structure. Convenience functions are added to set and get the local and remote addresses of a transport from the transport provider as well as determine the length of a sockaddr. A transport is responsible for setting the xpt_local and xpt_remote addresses in the svc_xprt structure as part of transport creation and xpo_accept processing. This cannot be done in a generic way and in fact varies between TCP, UDP and RDMA. A set of xpo_ functions (e.g. getlocalname, getremotename) could have been added but this would have resulted in additional caching and copying of the addresses around. Note that the xpt_local address should also be set on listening endpoints; for TCP/RDMA this is done as part of endpoint creation. For connected transports like TCP and RDMA, the addresses never change and can be set once and copied into the rqstp structure for each request. For UDP, however, the local and remote addresses may change for each request. In this case, the address information is obtained from the UDP recvmsg info and copied into the rqstp structure from there. A svc_xprt_local_port function was also added that returns the local port given a transport. This is used by svc_create_xprt when returning the port associated with a newly created transport, and later when creating a generic find transport service to check if a service is already listening on a given port. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Acked-by: Neil Brown <neilb@suse.de> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Greg Banks <gnb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-12-31 06:08:12 +03:00
struct sockaddr_storage addr;
struct sockaddr *newsin = (struct sockaddr *)&addr;
int newlen;
RPC_IFDEBUG(char buf[RPC_MAX_ADDRBUFLEN]);
dprintk("svc: svc_create_socket(%s, %d, %s)\n",
serv->sv_program->pg_name, protocol,
__svc_print_addr(sin, buf, sizeof(buf)));
if (protocol != IPPROTO_UDP && protocol != IPPROTO_TCP) {
printk(KERN_WARNING "svc: only UDP and TCP "
"sockets supported\n");
return ERR_PTR(-EINVAL);
}
type = (protocol == IPPROTO_UDP)? SOCK_DGRAM : SOCK_STREAM;
error = sock_create_kern(sin->sa_family, type, protocol, &sock);
if (error < 0)
return ERR_PTR(error);
svc_reclassify_socket(sock);
if (type == SOCK_STREAM)
sock->sk->sk_reuse = 1; /* allow address reuse */
error = kernel_bind(sock, sin, len);
if (error < 0)
goto bummer;
svc: Move the sockaddr information to svc_xprt This patch moves the transport sockaddr to the svc_xprt structure. Convenience functions are added to set and get the local and remote addresses of a transport from the transport provider as well as determine the length of a sockaddr. A transport is responsible for setting the xpt_local and xpt_remote addresses in the svc_xprt structure as part of transport creation and xpo_accept processing. This cannot be done in a generic way and in fact varies between TCP, UDP and RDMA. A set of xpo_ functions (e.g. getlocalname, getremotename) could have been added but this would have resulted in additional caching and copying of the addresses around. Note that the xpt_local address should also be set on listening endpoints; for TCP/RDMA this is done as part of endpoint creation. For connected transports like TCP and RDMA, the addresses never change and can be set once and copied into the rqstp structure for each request. For UDP, however, the local and remote addresses may change for each request. In this case, the address information is obtained from the UDP recvmsg info and copied into the rqstp structure from there. A svc_xprt_local_port function was also added that returns the local port given a transport. This is used by svc_create_xprt when returning the port associated with a newly created transport, and later when creating a generic find transport service to check if a service is already listening on a given port. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Acked-by: Neil Brown <neilb@suse.de> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Greg Banks <gnb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-12-31 06:08:12 +03:00
newlen = len;
error = kernel_getsockname(sock, newsin, &newlen);
if (error < 0)
goto bummer;
if (protocol == IPPROTO_TCP) {
if ((error = kernel_listen(sock, 64)) < 0)
goto bummer;
}
if ((svsk = svc_setup_socket(serv, sock, &error, flags)) != NULL) {
svc: Move the sockaddr information to svc_xprt This patch moves the transport sockaddr to the svc_xprt structure. Convenience functions are added to set and get the local and remote addresses of a transport from the transport provider as well as determine the length of a sockaddr. A transport is responsible for setting the xpt_local and xpt_remote addresses in the svc_xprt structure as part of transport creation and xpo_accept processing. This cannot be done in a generic way and in fact varies between TCP, UDP and RDMA. A set of xpo_ functions (e.g. getlocalname, getremotename) could have been added but this would have resulted in additional caching and copying of the addresses around. Note that the xpt_local address should also be set on listening endpoints; for TCP/RDMA this is done as part of endpoint creation. For connected transports like TCP and RDMA, the addresses never change and can be set once and copied into the rqstp structure for each request. For UDP, however, the local and remote addresses may change for each request. In this case, the address information is obtained from the UDP recvmsg info and copied into the rqstp structure from there. A svc_xprt_local_port function was also added that returns the local port given a transport. This is used by svc_create_xprt when returning the port associated with a newly created transport, and later when creating a generic find transport service to check if a service is already listening on a given port. Signed-off-by: Tom Tucker <tom@opengridcomputing.com> Acked-by: Neil Brown <neilb@suse.de> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Greg Banks <gnb@sgi.com> Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
2007-12-31 06:08:12 +03:00
svc_xprt_set_local(&svsk->sk_xprt, newsin, newlen);
return (struct svc_xprt *)svsk;
}
bummer:
dprintk("svc: svc_create_socket error = %d\n", -error);
sock_release(sock);
return ERR_PTR(error);
}
/*
* Detach the svc_sock from the socket so that no
* more callbacks occur.
*/
static void svc_sock_detach(struct svc_xprt *xprt)
{
struct svc_sock *svsk = container_of(xprt, struct svc_sock, sk_xprt);
struct sock *sk = svsk->sk_sk;
dprintk("svc: svc_sock_detach(%p)\n", svsk);
/* put back the old socket callbacks */
sk->sk_state_change = svsk->sk_ostate;
sk->sk_data_ready = svsk->sk_odata;
sk->sk_write_space = svsk->sk_owspace;
if (sk->sk_sleep && waitqueue_active(sk->sk_sleep))
wake_up_interruptible(sk->sk_sleep);
}
/*
* Disconnect the socket, and reset the callbacks
*/
static void svc_tcp_sock_detach(struct svc_xprt *xprt)
{
struct svc_sock *svsk = container_of(xprt, struct svc_sock, sk_xprt);
dprintk("svc: svc_tcp_sock_detach(%p)\n", svsk);
svc_sock_detach(xprt);
if (!test_bit(XPT_LISTENER, &xprt->xpt_flags))
kernel_sock_shutdown(svsk->sk_sock, SHUT_RDWR);
}
/*
* Free the svc_sock's socket resources and the svc_sock itself.
*/
static void svc_sock_free(struct svc_xprt *xprt)
{
struct svc_sock *svsk = container_of(xprt, struct svc_sock, sk_xprt);
dprintk("svc: svc_sock_free(%p)\n", svsk);
if (svsk->sk_sock->file)
sockfd_put(svsk->sk_sock);
else
sock_release(svsk->sk_sock);
kfree(svsk);
}