WSL2-Linux-Kernel/arch/arm/mach-ixp4xx/include/mach/debug-macro.S

/* arch/arm/mach-ixp4xx/include/mach/debug-macro.S
 *
 * Debugging macro include header
 *
 *  Copyright (C) 1994-1999 Russell King
 *  Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
*/

                .macro  addruart, rp, rv, tmp
#ifdef __ARMEB__
                mov     \rp, #3         @ Uart regs are at off set of 3 if
					@ byte writes used - Big Endian.
#else
		mov	\rp, #0
#endif
		orr	\rv, \rp, #0xfe000000	@ virtual
		orr	\rv, \rv, #0x00f00000
                orr     \rp, \rp, #0xc8000000	@ physical
                .endm

#define UART_SHIFT	2
#include <asm/hardware/debug-8250.S>
[ARM] Move include/asm-arm/arch-* to arch/arm//include/mach This just leaves include/asm-arm/plat- to deal with. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 2008-08-05 19:14:15 +04:00			`/* arch/arm/mach-ixp4xx/include/mach/debug-macro.S`
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-17 02:20:36 +04:00			`*`
			`* Debugging macro include header`
			`*`
			`* Copyright (C) 1994-1999 Russell King`
			`* Moved from linux/arch/arm/kernel/debug.S by Ben Dooks`
			`*`
			`* This program is free software; you can redistribute it and/or modify`
			`* it under the terms of the GNU General Public License version 2 as`
			`* published by the Free Software Foundation.`
			`*/`

ARM: add an extra temp register to the low level debugging addruart macro Some platforms (like OMAP not to name it) are doing rather complicated hacks just to determine the base UART address to use. Let's give their addruart macro some slack by providing an extra work register which will allow for much needed cleanups. This is basically a no-op as this commit is only adding the extra argument to the macro but no one is using it yet. Signed-off-by: nicolas Pitre <nicolas.pitre@linaro.org> Reviewed-by: Kevin Hilman <khilman@ti.com> 2011-09-01 06:55:46 +04:00			`.macro addruart, rp, rv, tmp`
IXP4xx: Fix LL debugging on little-endian CPU. IXP4xx only needs +3 offset for UART registers when running in big-endian mode. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> 2010-03-17 00:11:59 +03:00			`#ifdef __ARMEB__`
arm: return both physical and virtual addresses from addruart Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> 2010-07-06 14:30:06 +04:00			`mov \rp, #3 @ Uart regs are at off set of 3 if`
			`@ byte writes used - Big Endian.`
			`#else`
			`mov \rp, #0`
IXP4xx: Fix LL debugging on little-endian CPU. IXP4xx only needs +3 offset for UART registers when running in big-endian mode. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> 2010-03-17 00:11:59 +03:00			`#endif`
IXP4xx: map CPU config registers within VMALLOC region. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> 2012-09-02 02:50:39 +04:00			`orr \rv, \rp, #0xfe000000 @ virtual`
			`orr \rv, \rv, #0x00f00000`
arm: return both physical and virtual addresses from addruart Rather than checking the MMU status in every instance of addruart, do it once in kernel/debug.S, and change the existing addruart macros to return both physical and virtual addresses. The main debug code can then select the appropriate address to use. This will also allow us to retreive the address of a uart for the MMU state that we're not current in. Updated with fixes for OMAP from Jason Wang <jason77.wang@gmail.com> and Tony Lindgren <tony@atomide.com>, and fix for versatile express from Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>. Signed-off-by: Jeremy Kerr <jeremy.kerr@canonical.com> Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Jason Wang <jason77.wang@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Tested-by: Kevin Hilman <khilman@deeprootsystems.com> 2010-07-06 14:30:06 +04:00			`orr \rp, \rp, #0xc8000000 @ physical`
Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! 2005-04-17 02:20:36 +04:00			`.endm`

[ARM] Collect 8250-based debug implementations together Several ARM machine implementations used an 8250 compatible port for debugging purposes, and indepdently implemented the low level debug macros every time. Provide a common implementation and convert these implementations to use this version. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> 2006-03-16 23:40:25 +03:00			`#define UART_SHIFT 2`
			`#include <asm/hardware/debug-8250.S>`