WSL2-Linux-Kernel/drivers/acpi/acpi_lpss.c

1269 строки
32 KiB
C
Исходник Обычный вид История

ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
/*
* ACPI support for Intel Lynxpoint LPSS.
*
* Copyright (C) 2013, Intel Corporation
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
* Authors: Mika Westerberg <mika.westerberg@linux.intel.com>
* Rafael J. Wysocki <rafael.j.wysocki@intel.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/acpi.h>
#include <linux/clkdev.h>
#include <linux/clk-provider.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/mutex.h>
#include <linux/pci.h>
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
#include <linux/platform_device.h>
#include <linux/platform_data/clk-lpss.h>
#include <linux/platform_data/x86/pmc_atom.h>
#include <linux/pm_domain.h>
ACPI / LPSS: Add support for exposing LTR registers to user space Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have registers providing access to LTR (Latency Tolerance Reporting) functionality that allows software to monitor and possibly influence the aggressiveness of the platform's active-state power management. For each LPSS device, there are two modes of operation related to LTR, the auto mode and the software mode. In the auto mode the LTR is set up by the platform firmware and managed by hardware. Software can only read the LTR register values to monitor the platform's behavior. In the software mode it is possible to use LTR to control the extent to which the platform will use its built-in power management features. This changeset adds support for reading the LPSS devices' LTR registers and exposing their values to user space for monitoring and diagnostics purposes. It re-uses the MMIO mappings created to access the LPSS devices' clock registers for reading the values of the LTR registers and exposes them to user space through sysfs device attributes. Namely, a new atrribute group, lpss_ltr, is created for each LPSS device. It contains three new attributes: ltr_mode, auto_ltr, sw_ltr. The value of the ltr_mode attribute reflects the LTR mode being used at the moment (software vs auto) and the other two contain the actual register values (raw) whose meaning depends on the LTR mode. All of these attributes are read-only. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-07 02:46:28 +04:00
#include <linux/pm_runtime.h>
#include <linux/pwm.h>
#include <linux/suspend.h>
#include <linux/delay.h>
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
#include "internal.h"
ACPI_MODULE_NAME("acpi_lpss");
#ifdef CONFIG_X86_INTEL_LPSS
#include <asm/cpu_device_id.h>
#include <asm/intel-family.h>
#include <asm/iosf_mbi.h>
#define LPSS_ADDR(desc) ((unsigned long)&desc)
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
#define LPSS_CLK_SIZE 0x04
ACPI / LPSS: Add support for exposing LTR registers to user space Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have registers providing access to LTR (Latency Tolerance Reporting) functionality that allows software to monitor and possibly influence the aggressiveness of the platform's active-state power management. For each LPSS device, there are two modes of operation related to LTR, the auto mode and the software mode. In the auto mode the LTR is set up by the platform firmware and managed by hardware. Software can only read the LTR register values to monitor the platform's behavior. In the software mode it is possible to use LTR to control the extent to which the platform will use its built-in power management features. This changeset adds support for reading the LPSS devices' LTR registers and exposing their values to user space for monitoring and diagnostics purposes. It re-uses the MMIO mappings created to access the LPSS devices' clock registers for reading the values of the LTR registers and exposes them to user space through sysfs device attributes. Namely, a new atrribute group, lpss_ltr, is created for each LPSS device. It contains three new attributes: ltr_mode, auto_ltr, sw_ltr. The value of the ltr_mode attribute reflects the LTR mode being used at the moment (software vs auto) and the other two contain the actual register values (raw) whose meaning depends on the LTR mode. All of these attributes are read-only. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-07 02:46:28 +04:00
#define LPSS_LTR_SIZE 0x18
/* Offsets relative to LPSS_PRIVATE_OFFSET */
#define LPSS_CLK_DIVIDER_DEF_MASK (BIT(1) | BIT(16))
#define LPSS_RESETS 0x04
#define LPSS_RESETS_RESET_FUNC BIT(0)
#define LPSS_RESETS_RESET_APB BIT(1)
ACPI / LPSS: Add support for exposing LTR registers to user space Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have registers providing access to LTR (Latency Tolerance Reporting) functionality that allows software to monitor and possibly influence the aggressiveness of the platform's active-state power management. For each LPSS device, there are two modes of operation related to LTR, the auto mode and the software mode. In the auto mode the LTR is set up by the platform firmware and managed by hardware. Software can only read the LTR register values to monitor the platform's behavior. In the software mode it is possible to use LTR to control the extent to which the platform will use its built-in power management features. This changeset adds support for reading the LPSS devices' LTR registers and exposing their values to user space for monitoring and diagnostics purposes. It re-uses the MMIO mappings created to access the LPSS devices' clock registers for reading the values of the LTR registers and exposes them to user space through sysfs device attributes. Namely, a new atrribute group, lpss_ltr, is created for each LPSS device. It contains three new attributes: ltr_mode, auto_ltr, sw_ltr. The value of the ltr_mode attribute reflects the LTR mode being used at the moment (software vs auto) and the other two contain the actual register values (raw) whose meaning depends on the LTR mode. All of these attributes are read-only. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-07 02:46:28 +04:00
#define LPSS_GENERAL 0x08
#define LPSS_GENERAL_LTR_MODE_SW BIT(2)
#define LPSS_GENERAL_UART_RTS_OVRD BIT(3)
ACPI / LPSS: Add support for exposing LTR registers to user space Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have registers providing access to LTR (Latency Tolerance Reporting) functionality that allows software to monitor and possibly influence the aggressiveness of the platform's active-state power management. For each LPSS device, there are two modes of operation related to LTR, the auto mode and the software mode. In the auto mode the LTR is set up by the platform firmware and managed by hardware. Software can only read the LTR register values to monitor the platform's behavior. In the software mode it is possible to use LTR to control the extent to which the platform will use its built-in power management features. This changeset adds support for reading the LPSS devices' LTR registers and exposing their values to user space for monitoring and diagnostics purposes. It re-uses the MMIO mappings created to access the LPSS devices' clock registers for reading the values of the LTR registers and exposes them to user space through sysfs device attributes. Namely, a new atrribute group, lpss_ltr, is created for each LPSS device. It contains three new attributes: ltr_mode, auto_ltr, sw_ltr. The value of the ltr_mode attribute reflects the LTR mode being used at the moment (software vs auto) and the other two contain the actual register values (raw) whose meaning depends on the LTR mode. All of these attributes are read-only. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-07 02:46:28 +04:00
#define LPSS_SW_LTR 0x10
#define LPSS_AUTO_LTR 0x14
#define LPSS_LTR_SNOOP_REQ BIT(15)
#define LPSS_LTR_SNOOP_MASK 0x0000FFFF
#define LPSS_LTR_SNOOP_LAT_1US 0x800
#define LPSS_LTR_SNOOP_LAT_32US 0xC00
#define LPSS_LTR_SNOOP_LAT_SHIFT 5
#define LPSS_LTR_SNOOP_LAT_CUTOFF 3000
#define LPSS_LTR_MAX_VAL 0x3FF
#define LPSS_TX_INT 0x20
#define LPSS_TX_INT_MASK BIT(1)
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
#define LPSS_PRV_REG_COUNT 9
/* LPSS Flags */
#define LPSS_CLK BIT(0)
#define LPSS_CLK_GATE BIT(1)
#define LPSS_CLK_DIVIDER BIT(2)
#define LPSS_LTR BIT(3)
#define LPSS_SAVE_CTX BIT(4)
#define LPSS_NO_D3_DELAY BIT(5)
ACPI / LPSS: Only call pwm_add_table() for Bay Trail PWM if PMIC HRV is 2 The Point of View mobii wintab p800w Bay Trail tablet comes with a Crystal Cove PMIC, yet uses the LPSS PWM for backlight control, rather then the Crystal Cove's PWM, so we need to call pwm_add_table() to add a pwm_backlight mapping for the LPSS pwm despite there being an INT33FD ACPI device present. On all Bay Trail devices the _HRV object of the INT33FD ACPI device will normally return 2, to indicate the Bay Trail variant of the CRC PMIC is present, except on this tablet where _HRV is 0xffff. I guess this is a hack to make the windows Crystal Cove PWM driver not bind. Out of the 44 DSTDs with an INT33FD device in there which I have (from different model devices) only the pov mobii wintab p800w uses 0xffff for the HRV. The byt_pwm_setup code calls acpi_dev_present to check for the presence of a INT33FD ACPI device which indicates that a CRC PMIC is present and if the INT33FD ACPI device is present then byt_pwm_setup will not add a pwm_backlight mapping for the LPSS pwm, so that the CRC PWM will get used instead. acpi_dev_present has a hrv parameter, this commit make us pass 2 instead of -1, so that things still match on normal tablets, but on this special case with its _HRV of 0xffff, the check will now fail so that the pwm_backlight mapping for the LPSS pwm gets added fixing backlight brightness control on this device. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-13 15:54:17 +03:00
/* Crystal Cove PMIC shares same ACPI ID between different platforms */
#define BYT_CRC_HRV 2
#define CHT_CRC_HRV 3
struct lpss_private_data;
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
struct lpss_device_desc {
unsigned int flags;
const char *clk_con_id;
ACPI / LPSS: Add support for exposing LTR registers to user space Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have registers providing access to LTR (Latency Tolerance Reporting) functionality that allows software to monitor and possibly influence the aggressiveness of the platform's active-state power management. For each LPSS device, there are two modes of operation related to LTR, the auto mode and the software mode. In the auto mode the LTR is set up by the platform firmware and managed by hardware. Software can only read the LTR register values to monitor the platform's behavior. In the software mode it is possible to use LTR to control the extent to which the platform will use its built-in power management features. This changeset adds support for reading the LPSS devices' LTR registers and exposing their values to user space for monitoring and diagnostics purposes. It re-uses the MMIO mappings created to access the LPSS devices' clock registers for reading the values of the LTR registers and exposes them to user space through sysfs device attributes. Namely, a new atrribute group, lpss_ltr, is created for each LPSS device. It contains three new attributes: ltr_mode, auto_ltr, sw_ltr. The value of the ltr_mode attribute reflects the LTR mode being used at the moment (software vs auto) and the other two contain the actual register values (raw) whose meaning depends on the LTR mode. All of these attributes are read-only. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-07 02:46:28 +04:00
unsigned int prv_offset;
size_t prv_size_override;
struct property_entry *properties;
void (*setup)(struct lpss_private_data *pdata);
2018-09-23 16:58:11 +03:00
bool resume_from_noirq;
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
};
static const struct lpss_device_desc lpss_dma_desc = {
.flags = LPSS_CLK,
};
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
struct lpss_private_data {
struct acpi_device *adev;
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
void __iomem *mmio_base;
resource_size_t mmio_size;
unsigned int fixed_clk_rate;
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
struct clk *clk;
const struct lpss_device_desc *dev_desc;
u32 prv_reg_ctx[LPSS_PRV_REG_COUNT];
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
};
/* Devices which need to be in D3 before lpss_iosf_enter_d3_state() proceeds */
static u32 pmc_atom_d3_mask = 0xfe000ffe;
/* LPSS run time quirks */
static unsigned int lpss_quirks;
/*
* LPSS_QUIRK_ALWAYS_POWER_ON: override power state for LPSS DMA device.
*
* The LPSS DMA controller has neither _PS0 nor _PS3 method. Moreover
* it can be powered off automatically whenever the last LPSS device goes down.
* In case of no power any access to the DMA controller will hang the system.
* The behaviour is reproduced on some HP laptops based on Intel BayTrail as
* well as on ASuS T100TA transformer.
*
* This quirk overrides power state of entire LPSS island to keep DMA powered
* on whenever we have at least one other device in use.
*/
#define LPSS_QUIRK_ALWAYS_POWER_ON BIT(0)
/* UART Component Parameter Register */
#define LPSS_UART_CPR 0xF4
#define LPSS_UART_CPR_AFCE BIT(4)
static void lpss_uart_setup(struct lpss_private_data *pdata)
{
unsigned int offset;
u32 val;
offset = pdata->dev_desc->prv_offset + LPSS_TX_INT;
val = readl(pdata->mmio_base + offset);
writel(val | LPSS_TX_INT_MASK, pdata->mmio_base + offset);
val = readl(pdata->mmio_base + LPSS_UART_CPR);
if (!(val & LPSS_UART_CPR_AFCE)) {
offset = pdata->dev_desc->prv_offset + LPSS_GENERAL;
val = readl(pdata->mmio_base + offset);
val |= LPSS_GENERAL_UART_RTS_OVRD;
writel(val, pdata->mmio_base + offset);
}
}
static void lpss_deassert_reset(struct lpss_private_data *pdata)
{
unsigned int offset;
u32 val;
offset = pdata->dev_desc->prv_offset + LPSS_RESETS;
val = readl(pdata->mmio_base + offset);
val |= LPSS_RESETS_RESET_APB | LPSS_RESETS_RESET_FUNC;
writel(val, pdata->mmio_base + offset);
}
/*
* BYT PWM used for backlight control by the i915 driver on systems without
* the Crystal Cove PMIC.
*/
static struct pwm_lookup byt_pwm_lookup[] = {
PWM_LOOKUP_WITH_MODULE("80860F09:00", 0, "0000:00:02.0",
"pwm_backlight", 0, PWM_POLARITY_NORMAL,
"pwm-lpss-platform"),
};
static void byt_pwm_setup(struct lpss_private_data *pdata)
{
struct acpi_device *adev = pdata->adev;
/* Only call pwm_add_table for the first PWM controller */
if (!adev->pnp.unique_id || strcmp(adev->pnp.unique_id, "1"))
return;
ACPI / LPSS: Only call pwm_add_table() for Bay Trail PWM if PMIC HRV is 2 The Point of View mobii wintab p800w Bay Trail tablet comes with a Crystal Cove PMIC, yet uses the LPSS PWM for backlight control, rather then the Crystal Cove's PWM, so we need to call pwm_add_table() to add a pwm_backlight mapping for the LPSS pwm despite there being an INT33FD ACPI device present. On all Bay Trail devices the _HRV object of the INT33FD ACPI device will normally return 2, to indicate the Bay Trail variant of the CRC PMIC is present, except on this tablet where _HRV is 0xffff. I guess this is a hack to make the windows Crystal Cove PWM driver not bind. Out of the 44 DSTDs with an INT33FD device in there which I have (from different model devices) only the pov mobii wintab p800w uses 0xffff for the HRV. The byt_pwm_setup code calls acpi_dev_present to check for the presence of a INT33FD ACPI device which indicates that a CRC PMIC is present and if the INT33FD ACPI device is present then byt_pwm_setup will not add a pwm_backlight mapping for the LPSS pwm, so that the CRC PWM will get used instead. acpi_dev_present has a hrv parameter, this commit make us pass 2 instead of -1, so that things still match on normal tablets, but on this special case with its _HRV of 0xffff, the check will now fail so that the pwm_backlight mapping for the LPSS pwm gets added fixing backlight brightness control on this device. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-04-13 15:54:17 +03:00
if (!acpi_dev_present("INT33FD", NULL, BYT_CRC_HRV))
pwm_add_table(byt_pwm_lookup, ARRAY_SIZE(byt_pwm_lookup));
}
#define LPSS_I2C_ENABLE 0x6c
static void byt_i2c_setup(struct lpss_private_data *pdata)
{
const char *uid_str = acpi_device_uid(pdata->adev);
acpi_handle handle = pdata->adev->handle;
unsigned long long shared_host = 0;
acpi_status status;
long uid = 0;
/* Expected to always be true, but better safe then sorry */
if (uid_str)
uid = simple_strtol(uid_str, NULL, 10);
/* Detect I2C bus shared with PUNIT and ignore its d3 status */
status = acpi_evaluate_integer(handle, "_SEM", NULL, &shared_host);
if (ACPI_SUCCESS(status) && shared_host && uid)
pmc_atom_d3_mask &= ~(BIT_LPSS2_F1_I2C1 << (uid - 1));
lpss_deassert_reset(pdata);
if (readl(pdata->mmio_base + pdata->dev_desc->prv_offset))
pdata->fixed_clk_rate = 133000000;
writel(0, pdata->mmio_base + LPSS_I2C_ENABLE);
}
/* BSW PWM used for backlight control by the i915 driver */
static struct pwm_lookup bsw_pwm_lookup[] = {
PWM_LOOKUP_WITH_MODULE("80862288:00", 0, "0000:00:02.0",
"pwm_backlight", 0, PWM_POLARITY_NORMAL,
"pwm-lpss-platform"),
};
static void bsw_pwm_setup(struct lpss_private_data *pdata)
{
struct acpi_device *adev = pdata->adev;
/* Only call pwm_add_table for the first PWM controller */
if (!adev->pnp.unique_id || strcmp(adev->pnp.unique_id, "1"))
return;
pwm_add_table(bsw_pwm_lookup, ARRAY_SIZE(bsw_pwm_lookup));
}
static const struct lpss_device_desc lpt_dev_desc = {
.flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR,
.prv_offset = 0x800,
};
static const struct lpss_device_desc lpt_i2c_dev_desc = {
.flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_LTR,
ACPI / LPSS: Add support for exposing LTR registers to user space Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have registers providing access to LTR (Latency Tolerance Reporting) functionality that allows software to monitor and possibly influence the aggressiveness of the platform's active-state power management. For each LPSS device, there are two modes of operation related to LTR, the auto mode and the software mode. In the auto mode the LTR is set up by the platform firmware and managed by hardware. Software can only read the LTR register values to monitor the platform's behavior. In the software mode it is possible to use LTR to control the extent to which the platform will use its built-in power management features. This changeset adds support for reading the LPSS devices' LTR registers and exposing their values to user space for monitoring and diagnostics purposes. It re-uses the MMIO mappings created to access the LPSS devices' clock registers for reading the values of the LTR registers and exposes them to user space through sysfs device attributes. Namely, a new atrribute group, lpss_ltr, is created for each LPSS device. It contains three new attributes: ltr_mode, auto_ltr, sw_ltr. The value of the ltr_mode attribute reflects the LTR mode being used at the moment (software vs auto) and the other two contain the actual register values (raw) whose meaning depends on the LTR mode. All of these attributes are read-only. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-07 02:46:28 +04:00
.prv_offset = 0x800,
};
static struct property_entry uart_properties[] = {
PROPERTY_ENTRY_U32("reg-io-width", 4),
PROPERTY_ENTRY_U32("reg-shift", 2),
PROPERTY_ENTRY_BOOL("snps,uart-16550-compatible"),
{ },
};
static const struct lpss_device_desc lpt_uart_dev_desc = {
.flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_LTR,
.clk_con_id = "baudclk",
.prv_offset = 0x800,
.setup = lpss_uart_setup,
.properties = uart_properties,
ACPI / LPSS: Add support for exposing LTR registers to user space Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have registers providing access to LTR (Latency Tolerance Reporting) functionality that allows software to monitor and possibly influence the aggressiveness of the platform's active-state power management. For each LPSS device, there are two modes of operation related to LTR, the auto mode and the software mode. In the auto mode the LTR is set up by the platform firmware and managed by hardware. Software can only read the LTR register values to monitor the platform's behavior. In the software mode it is possible to use LTR to control the extent to which the platform will use its built-in power management features. This changeset adds support for reading the LPSS devices' LTR registers and exposing their values to user space for monitoring and diagnostics purposes. It re-uses the MMIO mappings created to access the LPSS devices' clock registers for reading the values of the LTR registers and exposes them to user space through sysfs device attributes. Namely, a new atrribute group, lpss_ltr, is created for each LPSS device. It contains three new attributes: ltr_mode, auto_ltr, sw_ltr. The value of the ltr_mode attribute reflects the LTR mode being used at the moment (software vs auto) and the other two contain the actual register values (raw) whose meaning depends on the LTR mode. All of these attributes are read-only. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-07 02:46:28 +04:00
};
static const struct lpss_device_desc lpt_sdio_dev_desc = {
.flags = LPSS_LTR,
ACPI / LPSS: Add support for exposing LTR registers to user space Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have registers providing access to LTR (Latency Tolerance Reporting) functionality that allows software to monitor and possibly influence the aggressiveness of the platform's active-state power management. For each LPSS device, there are two modes of operation related to LTR, the auto mode and the software mode. In the auto mode the LTR is set up by the platform firmware and managed by hardware. Software can only read the LTR register values to monitor the platform's behavior. In the software mode it is possible to use LTR to control the extent to which the platform will use its built-in power management features. This changeset adds support for reading the LPSS devices' LTR registers and exposing their values to user space for monitoring and diagnostics purposes. It re-uses the MMIO mappings created to access the LPSS devices' clock registers for reading the values of the LTR registers and exposes them to user space through sysfs device attributes. Namely, a new atrribute group, lpss_ltr, is created for each LPSS device. It contains three new attributes: ltr_mode, auto_ltr, sw_ltr. The value of the ltr_mode attribute reflects the LTR mode being used at the moment (software vs auto) and the other two contain the actual register values (raw) whose meaning depends on the LTR mode. All of these attributes are read-only. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-07 02:46:28 +04:00
.prv_offset = 0x1000,
.prv_size_override = 0x1018,
};
static const struct lpss_device_desc byt_pwm_dev_desc = {
.flags = LPSS_SAVE_CTX,
.prv_offset = 0x800,
.setup = byt_pwm_setup,
};
static const struct lpss_device_desc bsw_pwm_dev_desc = {
.flags = LPSS_SAVE_CTX | LPSS_NO_D3_DELAY,
.prv_offset = 0x800,
.setup = bsw_pwm_setup,
};
static const struct lpss_device_desc byt_uart_dev_desc = {
.flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX,
.clk_con_id = "baudclk",
.prv_offset = 0x800,
.setup = lpss_uart_setup,
.properties = uart_properties,
};
static const struct lpss_device_desc bsw_uart_dev_desc = {
.flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX
| LPSS_NO_D3_DELAY,
.clk_con_id = "baudclk",
.prv_offset = 0x800,
.setup = lpss_uart_setup,
.properties = uart_properties,
};
static const struct lpss_device_desc byt_spi_dev_desc = {
.flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX,
.prv_offset = 0x400,
};
static const struct lpss_device_desc byt_sdio_dev_desc = {
.flags = LPSS_CLK,
};
static const struct lpss_device_desc byt_i2c_dev_desc = {
.flags = LPSS_CLK | LPSS_SAVE_CTX,
.prv_offset = 0x800,
.setup = byt_i2c_setup,
2018-09-23 16:58:11 +03:00
.resume_from_noirq = true,
};
static const struct lpss_device_desc bsw_i2c_dev_desc = {
.flags = LPSS_CLK | LPSS_SAVE_CTX | LPSS_NO_D3_DELAY,
.prv_offset = 0x800,
.setup = byt_i2c_setup,
2018-09-23 16:58:11 +03:00
.resume_from_noirq = true,
};
static const struct lpss_device_desc bsw_spi_dev_desc = {
.flags = LPSS_CLK | LPSS_CLK_GATE | LPSS_CLK_DIVIDER | LPSS_SAVE_CTX
| LPSS_NO_D3_DELAY,
.prv_offset = 0x400,
.setup = lpss_deassert_reset,
};
#define ICPU(model) { X86_VENDOR_INTEL, 6, model, X86_FEATURE_ANY, }
static const struct x86_cpu_id lpss_cpu_ids[] = {
ICPU(INTEL_FAM6_ATOM_SILVERMONT), /* Valleyview, Bay Trail */
ICPU(INTEL_FAM6_ATOM_AIRMONT), /* Braswell, Cherry Trail */
{}
};
#else
#define LPSS_ADDR(desc) (0UL)
#endif /* CONFIG_X86_INTEL_LPSS */
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
static const struct acpi_device_id acpi_lpss_device_ids[] = {
/* Generic LPSS devices */
{ "INTL9C60", LPSS_ADDR(lpss_dma_desc) },
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
/* Lynxpoint LPSS devices */
{ "INT33C0", LPSS_ADDR(lpt_dev_desc) },
{ "INT33C1", LPSS_ADDR(lpt_dev_desc) },
{ "INT33C2", LPSS_ADDR(lpt_i2c_dev_desc) },
{ "INT33C3", LPSS_ADDR(lpt_i2c_dev_desc) },
{ "INT33C4", LPSS_ADDR(lpt_uart_dev_desc) },
{ "INT33C5", LPSS_ADDR(lpt_uart_dev_desc) },
{ "INT33C6", LPSS_ADDR(lpt_sdio_dev_desc) },
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
{ "INT33C7", },
/* BayTrail LPSS devices */
{ "80860F09", LPSS_ADDR(byt_pwm_dev_desc) },
{ "80860F0A", LPSS_ADDR(byt_uart_dev_desc) },
{ "80860F0E", LPSS_ADDR(byt_spi_dev_desc) },
{ "80860F14", LPSS_ADDR(byt_sdio_dev_desc) },
{ "80860F41", LPSS_ADDR(byt_i2c_dev_desc) },
{ "INT33B2", },
{ "INT33FC", },
/* Braswell LPSS devices */
{ "80862286", LPSS_ADDR(lpss_dma_desc) },
{ "80862288", LPSS_ADDR(bsw_pwm_dev_desc) },
{ "8086228A", LPSS_ADDR(bsw_uart_dev_desc) },
{ "8086228E", LPSS_ADDR(bsw_spi_dev_desc) },
{ "808622C0", LPSS_ADDR(lpss_dma_desc) },
{ "808622C1", LPSS_ADDR(bsw_i2c_dev_desc) },
/* Broadwell LPSS devices */
{ "INT3430", LPSS_ADDR(lpt_dev_desc) },
{ "INT3431", LPSS_ADDR(lpt_dev_desc) },
{ "INT3432", LPSS_ADDR(lpt_i2c_dev_desc) },
{ "INT3433", LPSS_ADDR(lpt_i2c_dev_desc) },
{ "INT3434", LPSS_ADDR(lpt_uart_dev_desc) },
{ "INT3435", LPSS_ADDR(lpt_uart_dev_desc) },
{ "INT3436", LPSS_ADDR(lpt_sdio_dev_desc) },
{ "INT3437", },
/* Wildcat Point LPSS devices */
{ "INT3438", LPSS_ADDR(lpt_dev_desc) },
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
{ }
};
#ifdef CONFIG_X86_INTEL_LPSS
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
static int is_memory(struct acpi_resource *res, void *not_used)
{
struct resource r;
return !acpi_dev_resource_memory(res, &r);
}
/* LPSS main clock device. */
static struct platform_device *lpss_clk_dev;
static inline void lpt_register_clock_device(void)
{
lpss_clk_dev = platform_device_register_simple("clk-lpt", -1, NULL, 0);
}
static int register_device_clock(struct acpi_device *adev,
struct lpss_private_data *pdata)
{
const struct lpss_device_desc *dev_desc = pdata->dev_desc;
const char *devname = dev_name(&adev->dev);
struct clk *clk;
struct lpss_clk_data *clk_data;
const char *parent, *clk_name;
void __iomem *prv_base;
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
if (!lpss_clk_dev)
lpt_register_clock_device();
clk_data = platform_get_drvdata(lpss_clk_dev);
if (!clk_data)
return -ENODEV;
clk = clk_data->clk;
if (!pdata->mmio_base
ACPI / LPSS: Add support for exposing LTR registers to user space Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have registers providing access to LTR (Latency Tolerance Reporting) functionality that allows software to monitor and possibly influence the aggressiveness of the platform's active-state power management. For each LPSS device, there are two modes of operation related to LTR, the auto mode and the software mode. In the auto mode the LTR is set up by the platform firmware and managed by hardware. Software can only read the LTR register values to monitor the platform's behavior. In the software mode it is possible to use LTR to control the extent to which the platform will use its built-in power management features. This changeset adds support for reading the LPSS devices' LTR registers and exposing their values to user space for monitoring and diagnostics purposes. It re-uses the MMIO mappings created to access the LPSS devices' clock registers for reading the values of the LTR registers and exposes them to user space through sysfs device attributes. Namely, a new atrribute group, lpss_ltr, is created for each LPSS device. It contains three new attributes: ltr_mode, auto_ltr, sw_ltr. The value of the ltr_mode attribute reflects the LTR mode being used at the moment (software vs auto) and the other two contain the actual register values (raw) whose meaning depends on the LTR mode. All of these attributes are read-only. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-07 02:46:28 +04:00
|| pdata->mmio_size < dev_desc->prv_offset + LPSS_CLK_SIZE)
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
return -ENODATA;
parent = clk_data->name;
prv_base = pdata->mmio_base + dev_desc->prv_offset;
if (pdata->fixed_clk_rate) {
clk = clk_register_fixed_rate(NULL, devname, parent, 0,
pdata->fixed_clk_rate);
goto out;
}
if (dev_desc->flags & LPSS_CLK_GATE) {
clk = clk_register_gate(NULL, devname, parent, 0,
prv_base, 0, 0, NULL);
parent = devname;
}
if (dev_desc->flags & LPSS_CLK_DIVIDER) {
/* Prevent division by zero */
if (!readl(prv_base))
writel(LPSS_CLK_DIVIDER_DEF_MASK, prv_base);
clk_name = kasprintf(GFP_KERNEL, "%s-div", devname);
if (!clk_name)
return -ENOMEM;
clk = clk_register_fractional_divider(NULL, clk_name, parent,
0, prv_base,
1, 15, 16, 15, 0, NULL);
parent = clk_name;
clk_name = kasprintf(GFP_KERNEL, "%s-update", devname);
if (!clk_name) {
kfree(parent);
return -ENOMEM;
}
clk = clk_register_gate(NULL, clk_name, parent,
CLK_SET_RATE_PARENT | CLK_SET_RATE_GATE,
prv_base, 31, 0, NULL);
kfree(parent);
kfree(clk_name);
}
out:
if (IS_ERR(clk))
return PTR_ERR(clk);
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
pdata->clk = clk;
clk_register_clkdev(clk, dev_desc->clk_con_id, devname);
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
return 0;
}
struct lpss_device_links {
const char *supplier_hid;
const char *supplier_uid;
const char *consumer_hid;
const char *consumer_uid;
u32 flags;
};
/*
* The _DEP method is used to identify dependencies but instead of creating
* device links for every handle in _DEP, only links in the following list are
* created. That is necessary because, in the general case, _DEP can refer to
* devices that might not have drivers, or that are on different buses, or where
* the supplier is not enumerated until after the consumer is probed.
*/
static const struct lpss_device_links lpss_device_links[] = {
{"808622C1", "7", "80860F14", "3", DL_FLAG_PM_RUNTIME},
{"808622C1", "7", "LNXVIDEO", NULL, DL_FLAG_PM_RUNTIME},
2018-09-23 16:58:10 +03:00
{"80860F41", "5", "LNXVIDEO", NULL, DL_FLAG_PM_RUNTIME},
};
static bool hid_uid_match(struct acpi_device *adev,
const char *hid2, const char *uid2)
{
const char *hid1 = acpi_device_hid(adev);
const char *uid1 = acpi_device_uid(adev);
if (strcmp(hid1, hid2))
return false;
if (!uid2)
return true;
return uid1 && !strcmp(uid1, uid2);
}
static bool acpi_lpss_is_supplier(struct acpi_device *adev,
const struct lpss_device_links *link)
{
return hid_uid_match(adev, link->supplier_hid, link->supplier_uid);
}
static bool acpi_lpss_is_consumer(struct acpi_device *adev,
const struct lpss_device_links *link)
{
return hid_uid_match(adev, link->consumer_hid, link->consumer_uid);
}
struct hid_uid {
const char *hid;
const char *uid;
};
static int match_hid_uid(struct device *dev, void *data)
{
struct acpi_device *adev = ACPI_COMPANION(dev);
struct hid_uid *id = data;
if (!adev)
return 0;
return hid_uid_match(adev, id->hid, id->uid);
}
static struct device *acpi_lpss_find_device(const char *hid, const char *uid)
{
struct device *dev;
struct hid_uid data = {
.hid = hid,
.uid = uid,
};
dev = bus_find_device(&platform_bus_type, NULL, &data, match_hid_uid);
if (dev)
return dev;
return bus_find_device(&pci_bus_type, NULL, &data, match_hid_uid);
}
static bool acpi_lpss_dep(struct acpi_device *adev, acpi_handle handle)
{
struct acpi_handle_list dep_devices;
acpi_status status;
int i;
if (!acpi_has_method(adev->handle, "_DEP"))
return false;
status = acpi_evaluate_reference(adev->handle, "_DEP", NULL,
&dep_devices);
if (ACPI_FAILURE(status)) {
dev_dbg(&adev->dev, "Failed to evaluate _DEP.\n");
return false;
}
for (i = 0; i < dep_devices.count; i++) {
if (dep_devices.handles[i] == handle)
return true;
}
return false;
}
static void acpi_lpss_link_consumer(struct device *dev1,
const struct lpss_device_links *link)
{
struct device *dev2;
dev2 = acpi_lpss_find_device(link->consumer_hid, link->consumer_uid);
if (!dev2)
return;
if (acpi_lpss_dep(ACPI_COMPANION(dev2), ACPI_HANDLE(dev1)))
device_link_add(dev2, dev1, link->flags);
put_device(dev2);
}
static void acpi_lpss_link_supplier(struct device *dev1,
const struct lpss_device_links *link)
{
struct device *dev2;
dev2 = acpi_lpss_find_device(link->supplier_hid, link->supplier_uid);
if (!dev2)
return;
if (acpi_lpss_dep(ACPI_COMPANION(dev1), ACPI_HANDLE(dev2)))
device_link_add(dev1, dev2, link->flags);
put_device(dev2);
}
static void acpi_lpss_create_device_links(struct acpi_device *adev,
struct platform_device *pdev)
{
int i;
for (i = 0; i < ARRAY_SIZE(lpss_device_links); i++) {
const struct lpss_device_links *link = &lpss_device_links[i];
if (acpi_lpss_is_supplier(adev, link))
acpi_lpss_link_consumer(&pdev->dev, link);
if (acpi_lpss_is_consumer(adev, link))
acpi_lpss_link_supplier(&pdev->dev, link);
}
}
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
static int acpi_lpss_create_device(struct acpi_device *adev,
const struct acpi_device_id *id)
{
const struct lpss_device_desc *dev_desc;
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
struct lpss_private_data *pdata;
struct resource_entry *rentry;
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
struct list_head resource_list;
struct platform_device *pdev;
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
int ret;
dev_desc = (const struct lpss_device_desc *)id->driver_data;
if (!dev_desc) {
pdev = acpi_create_platform_device(adev, NULL);
return IS_ERR_OR_NULL(pdev) ? PTR_ERR(pdev) : 1;
}
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return -ENOMEM;
INIT_LIST_HEAD(&resource_list);
ret = acpi_dev_get_resources(adev, &resource_list, is_memory, NULL);
if (ret < 0)
goto err_out;
list_for_each_entry(rentry, &resource_list, node)
if (resource_type(rentry->res) == IORESOURCE_MEM) {
if (dev_desc->prv_size_override)
pdata->mmio_size = dev_desc->prv_size_override;
else
pdata->mmio_size = resource_size(rentry->res);
pdata->mmio_base = ioremap(rentry->res->start,
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
pdata->mmio_size);
break;
}
acpi_dev_free_resource_list(&resource_list);
if (!pdata->mmio_base) {
/* Avoid acpi_bus_attach() instantiating a pdev for this dev. */
adev->pnp.type.platform_id = 0;
/* Skip the device, but continue the namespace scan. */
ret = 0;
goto err_out;
}
pdata->adev = adev;
pdata->dev_desc = dev_desc;
if (dev_desc->setup)
dev_desc->setup(pdata);
if (dev_desc->flags & LPSS_CLK) {
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
ret = register_device_clock(adev, pdata);
if (ret) {
/* Skip the device, but continue the namespace scan. */
ret = 0;
goto err_out;
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
}
}
/*
* This works around a known issue in ACPI tables where LPSS devices
* have _PS0 and _PS3 without _PSC (and no power resources), so
* acpi_bus_init_power() will assume that the BIOS has put them into D0.
*/
ret = acpi_device_fix_up_power(adev);
if (ret) {
/* Skip the device, but continue the namespace scan. */
ret = 0;
goto err_out;
}
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
adev->driver_data = pdata;
pdev = acpi_create_platform_device(adev, dev_desc->properties);
if (!IS_ERR_OR_NULL(pdev)) {
acpi_lpss_create_device_links(adev, pdev);
return 1;
}
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
ret = PTR_ERR(pdev);
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
adev->driver_data = NULL;
err_out:
kfree(pdata);
return ret;
}
static u32 __lpss_reg_read(struct lpss_private_data *pdata, unsigned int reg)
{
return readl(pdata->mmio_base + pdata->dev_desc->prv_offset + reg);
}
static void __lpss_reg_write(u32 val, struct lpss_private_data *pdata,
unsigned int reg)
{
writel(val, pdata->mmio_base + pdata->dev_desc->prv_offset + reg);
}
ACPI / LPSS: Add support for exposing LTR registers to user space Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have registers providing access to LTR (Latency Tolerance Reporting) functionality that allows software to monitor and possibly influence the aggressiveness of the platform's active-state power management. For each LPSS device, there are two modes of operation related to LTR, the auto mode and the software mode. In the auto mode the LTR is set up by the platform firmware and managed by hardware. Software can only read the LTR register values to monitor the platform's behavior. In the software mode it is possible to use LTR to control the extent to which the platform will use its built-in power management features. This changeset adds support for reading the LPSS devices' LTR registers and exposing their values to user space for monitoring and diagnostics purposes. It re-uses the MMIO mappings created to access the LPSS devices' clock registers for reading the values of the LTR registers and exposes them to user space through sysfs device attributes. Namely, a new atrribute group, lpss_ltr, is created for each LPSS device. It contains three new attributes: ltr_mode, auto_ltr, sw_ltr. The value of the ltr_mode attribute reflects the LTR mode being used at the moment (software vs auto) and the other two contain the actual register values (raw) whose meaning depends on the LTR mode. All of these attributes are read-only. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-07 02:46:28 +04:00
static int lpss_reg_read(struct device *dev, unsigned int reg, u32 *val)
{
struct acpi_device *adev;
struct lpss_private_data *pdata;
unsigned long flags;
int ret;
ret = acpi_bus_get_device(ACPI_HANDLE(dev), &adev);
if (WARN_ON(ret))
return ret;
spin_lock_irqsave(&dev->power.lock, flags);
if (pm_runtime_suspended(dev)) {
ret = -EAGAIN;
goto out;
}
pdata = acpi_driver_data(adev);
if (WARN_ON(!pdata || !pdata->mmio_base)) {
ret = -ENODEV;
goto out;
}
*val = __lpss_reg_read(pdata, reg);
ACPI / LPSS: Add support for exposing LTR registers to user space Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have registers providing access to LTR (Latency Tolerance Reporting) functionality that allows software to monitor and possibly influence the aggressiveness of the platform's active-state power management. For each LPSS device, there are two modes of operation related to LTR, the auto mode and the software mode. In the auto mode the LTR is set up by the platform firmware and managed by hardware. Software can only read the LTR register values to monitor the platform's behavior. In the software mode it is possible to use LTR to control the extent to which the platform will use its built-in power management features. This changeset adds support for reading the LPSS devices' LTR registers and exposing their values to user space for monitoring and diagnostics purposes. It re-uses the MMIO mappings created to access the LPSS devices' clock registers for reading the values of the LTR registers and exposes them to user space through sysfs device attributes. Namely, a new atrribute group, lpss_ltr, is created for each LPSS device. It contains three new attributes: ltr_mode, auto_ltr, sw_ltr. The value of the ltr_mode attribute reflects the LTR mode being used at the moment (software vs auto) and the other two contain the actual register values (raw) whose meaning depends on the LTR mode. All of these attributes are read-only. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-07 02:46:28 +04:00
out:
spin_unlock_irqrestore(&dev->power.lock, flags);
return ret;
}
static ssize_t lpss_ltr_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
u32 ltr_value = 0;
unsigned int reg;
int ret;
reg = strcmp(attr->attr.name, "auto_ltr") ? LPSS_SW_LTR : LPSS_AUTO_LTR;
ret = lpss_reg_read(dev, reg, &ltr_value);
if (ret)
return ret;
return snprintf(buf, PAGE_SIZE, "%08x\n", ltr_value);
}
static ssize_t lpss_ltr_mode_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
u32 ltr_mode = 0;
char *outstr;
int ret;
ret = lpss_reg_read(dev, LPSS_GENERAL, &ltr_mode);
if (ret)
return ret;
outstr = (ltr_mode & LPSS_GENERAL_LTR_MODE_SW) ? "sw" : "auto";
return sprintf(buf, "%s\n", outstr);
}
static DEVICE_ATTR(auto_ltr, S_IRUSR, lpss_ltr_show, NULL);
static DEVICE_ATTR(sw_ltr, S_IRUSR, lpss_ltr_show, NULL);
static DEVICE_ATTR(ltr_mode, S_IRUSR, lpss_ltr_mode_show, NULL);
static struct attribute *lpss_attrs[] = {
&dev_attr_auto_ltr.attr,
&dev_attr_sw_ltr.attr,
&dev_attr_ltr_mode.attr,
NULL,
};
static const struct attribute_group lpss_attr_group = {
ACPI / LPSS: Add support for exposing LTR registers to user space Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have registers providing access to LTR (Latency Tolerance Reporting) functionality that allows software to monitor and possibly influence the aggressiveness of the platform's active-state power management. For each LPSS device, there are two modes of operation related to LTR, the auto mode and the software mode. In the auto mode the LTR is set up by the platform firmware and managed by hardware. Software can only read the LTR register values to monitor the platform's behavior. In the software mode it is possible to use LTR to control the extent to which the platform will use its built-in power management features. This changeset adds support for reading the LPSS devices' LTR registers and exposing their values to user space for monitoring and diagnostics purposes. It re-uses the MMIO mappings created to access the LPSS devices' clock registers for reading the values of the LTR registers and exposes them to user space through sysfs device attributes. Namely, a new atrribute group, lpss_ltr, is created for each LPSS device. It contains three new attributes: ltr_mode, auto_ltr, sw_ltr. The value of the ltr_mode attribute reflects the LTR mode being used at the moment (software vs auto) and the other two contain the actual register values (raw) whose meaning depends on the LTR mode. All of these attributes are read-only. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-07 02:46:28 +04:00
.attrs = lpss_attrs,
.name = "lpss_ltr",
};
static void acpi_lpss_set_ltr(struct device *dev, s32 val)
{
struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
u32 ltr_mode, ltr_val;
ltr_mode = __lpss_reg_read(pdata, LPSS_GENERAL);
if (val < 0) {
if (ltr_mode & LPSS_GENERAL_LTR_MODE_SW) {
ltr_mode &= ~LPSS_GENERAL_LTR_MODE_SW;
__lpss_reg_write(ltr_mode, pdata, LPSS_GENERAL);
}
return;
}
ltr_val = __lpss_reg_read(pdata, LPSS_SW_LTR) & ~LPSS_LTR_SNOOP_MASK;
if (val >= LPSS_LTR_SNOOP_LAT_CUTOFF) {
ltr_val |= LPSS_LTR_SNOOP_LAT_32US;
val = LPSS_LTR_MAX_VAL;
} else if (val > LPSS_LTR_MAX_VAL) {
ltr_val |= LPSS_LTR_SNOOP_LAT_32US | LPSS_LTR_SNOOP_REQ;
val >>= LPSS_LTR_SNOOP_LAT_SHIFT;
} else {
ltr_val |= LPSS_LTR_SNOOP_LAT_1US | LPSS_LTR_SNOOP_REQ;
}
ltr_val |= val;
__lpss_reg_write(ltr_val, pdata, LPSS_SW_LTR);
if (!(ltr_mode & LPSS_GENERAL_LTR_MODE_SW)) {
ltr_mode |= LPSS_GENERAL_LTR_MODE_SW;
__lpss_reg_write(ltr_mode, pdata, LPSS_GENERAL);
}
}
#ifdef CONFIG_PM
/**
* acpi_lpss_save_ctx() - Save the private registers of LPSS device
* @dev: LPSS device
* @pdata: pointer to the private data of the LPSS device
*
* Most LPSS devices have private registers which may loose their context when
* the device is powered down. acpi_lpss_save_ctx() saves those registers into
* prv_reg_ctx array.
*/
static void acpi_lpss_save_ctx(struct device *dev,
struct lpss_private_data *pdata)
{
unsigned int i;
for (i = 0; i < LPSS_PRV_REG_COUNT; i++) {
unsigned long offset = i * sizeof(u32);
pdata->prv_reg_ctx[i] = __lpss_reg_read(pdata, offset);
dev_dbg(dev, "saving 0x%08x from LPSS reg at offset 0x%02lx\n",
pdata->prv_reg_ctx[i], offset);
}
}
/**
* acpi_lpss_restore_ctx() - Restore the private registers of LPSS device
* @dev: LPSS device
* @pdata: pointer to the private data of the LPSS device
*
* Restores the registers that were previously stored with acpi_lpss_save_ctx().
*/
static void acpi_lpss_restore_ctx(struct device *dev,
struct lpss_private_data *pdata)
{
unsigned int i;
for (i = 0; i < LPSS_PRV_REG_COUNT; i++) {
unsigned long offset = i * sizeof(u32);
__lpss_reg_write(pdata->prv_reg_ctx[i], pdata, offset);
dev_dbg(dev, "restoring 0x%08x to LPSS reg at offset 0x%02lx\n",
pdata->prv_reg_ctx[i], offset);
}
}
static void acpi_lpss_d3_to_d0_delay(struct lpss_private_data *pdata)
{
/*
* The following delay is needed or the subsequent write operations may
* fail. The LPSS devices are actually PCI devices and the PCI spec
* expects 10ms delay before the device can be accessed after D3 to D0
* transition. However some platforms like BSW does not need this delay.
*/
unsigned int delay = 10; /* default 10ms delay */
if (pdata->dev_desc->flags & LPSS_NO_D3_DELAY)
delay = 0;
msleep(delay);
}
ACPI / LPSS: power on when probe() and otherwise when remove() When LPSS drivers are compiled as a module, which is usually the case, the second probe of that driver may fail because the driver is written in an assumption that device is powered on. That is not the case for all drivers. Moreover we would like not drain power in vain. Implement ->activate() and ->dismiss() callbacks in the ACPI LPSS custom power domain. -------- 8< -------- 8< -------- 8< -------- 8< -------- 8< -------- Case 1: The I2C probe() repeat. /sys/bus/platform/devices/808622C1:00 \_SB_.PCI0.I2C1 [D3hot] /sys/bus/platform/devices/808622C1:01 \_SB_.PCI0.I2C2 [D3hot] /sys/bus/platform/devices/808622C1:02 \_SB_.PCI0.I2C3 [D3hot] /sys/bus/platform/devices/808622C1:03 \_SB_.PCI0.I2C4 [D3hot] /sys/bus/platform/devices/808622C1:05 \_SB_.PCI0.I2C6 [D3hot] /sys/bus/platform/devices/808622C1:06 \_SB_.PCI0.I2C7 [D3hot] % modprobe i2c-designware-platform i2c_designware 808622C1:00: Unknown Synopsys component type: 0xffffffff i2c_designware 808622C1:01: Unknown Synopsys component type: 0xffffffff i2c_designware 808622C1:02: Unknown Synopsys component type: 0xffffffff i2c_designware 808622C1:03: Unknown Synopsys component type: 0xffffffff i2c_designware 808622C1:05: Unknown Synopsys component type: 0xffffffff i2c_designware 808622C1:06: Unknown Synopsys component type: 0xffffffff Case 2: The power drain in case of SDHCI. /sys/bus/platform/devices/80860F14:00 \_SB_.PCI0.SDHA [D3hot] /sys/bus/platform/devices/80860F14:01 \_SB_.PCI0.SDHC [D3hot] % modprobe -r sdhci-acpi mmc0: card 0001 removed /sys/bus/platform/devices/80860F14:00 \_SB_.PCI0.SDHA [D0] /sys/bus/platform/devices/80860F14:01 \_SB_.PCI0.SDHC [D0] -------- 8< -------- 8< -------- 8< -------- 8< -------- 8< -------- Patch fixes above problems. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-05 00:49:20 +03:00
static int acpi_lpss_activate(struct device *dev)
{
struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
int ret;
ret = acpi_dev_resume(dev);
ACPI / LPSS: power on when probe() and otherwise when remove() When LPSS drivers are compiled as a module, which is usually the case, the second probe of that driver may fail because the driver is written in an assumption that device is powered on. That is not the case for all drivers. Moreover we would like not drain power in vain. Implement ->activate() and ->dismiss() callbacks in the ACPI LPSS custom power domain. -------- 8< -------- 8< -------- 8< -------- 8< -------- 8< -------- Case 1: The I2C probe() repeat. /sys/bus/platform/devices/808622C1:00 \_SB_.PCI0.I2C1 [D3hot] /sys/bus/platform/devices/808622C1:01 \_SB_.PCI0.I2C2 [D3hot] /sys/bus/platform/devices/808622C1:02 \_SB_.PCI0.I2C3 [D3hot] /sys/bus/platform/devices/808622C1:03 \_SB_.PCI0.I2C4 [D3hot] /sys/bus/platform/devices/808622C1:05 \_SB_.PCI0.I2C6 [D3hot] /sys/bus/platform/devices/808622C1:06 \_SB_.PCI0.I2C7 [D3hot] % modprobe i2c-designware-platform i2c_designware 808622C1:00: Unknown Synopsys component type: 0xffffffff i2c_designware 808622C1:01: Unknown Synopsys component type: 0xffffffff i2c_designware 808622C1:02: Unknown Synopsys component type: 0xffffffff i2c_designware 808622C1:03: Unknown Synopsys component type: 0xffffffff i2c_designware 808622C1:05: Unknown Synopsys component type: 0xffffffff i2c_designware 808622C1:06: Unknown Synopsys component type: 0xffffffff Case 2: The power drain in case of SDHCI. /sys/bus/platform/devices/80860F14:00 \_SB_.PCI0.SDHA [D3hot] /sys/bus/platform/devices/80860F14:01 \_SB_.PCI0.SDHC [D3hot] % modprobe -r sdhci-acpi mmc0: card 0001 removed /sys/bus/platform/devices/80860F14:00 \_SB_.PCI0.SDHA [D0] /sys/bus/platform/devices/80860F14:01 \_SB_.PCI0.SDHC [D0] -------- 8< -------- 8< -------- 8< -------- 8< -------- 8< -------- Patch fixes above problems. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-05 00:49:20 +03:00
if (ret)
return ret;
acpi_lpss_d3_to_d0_delay(pdata);
/*
* This is called only on ->probe() stage where a device is either in
* known state defined by BIOS or most likely powered off. Due to this
* we have to deassert reset line to be sure that ->probe() will
* recognize the device.
*/
if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
lpss_deassert_reset(pdata);
return 0;
}
static void acpi_lpss_dismiss(struct device *dev)
{
acpi_dev_suspend(dev, false);
ACPI / LPSS: power on when probe() and otherwise when remove() When LPSS drivers are compiled as a module, which is usually the case, the second probe of that driver may fail because the driver is written in an assumption that device is powered on. That is not the case for all drivers. Moreover we would like not drain power in vain. Implement ->activate() and ->dismiss() callbacks in the ACPI LPSS custom power domain. -------- 8< -------- 8< -------- 8< -------- 8< -------- 8< -------- Case 1: The I2C probe() repeat. /sys/bus/platform/devices/808622C1:00 \_SB_.PCI0.I2C1 [D3hot] /sys/bus/platform/devices/808622C1:01 \_SB_.PCI0.I2C2 [D3hot] /sys/bus/platform/devices/808622C1:02 \_SB_.PCI0.I2C3 [D3hot] /sys/bus/platform/devices/808622C1:03 \_SB_.PCI0.I2C4 [D3hot] /sys/bus/platform/devices/808622C1:05 \_SB_.PCI0.I2C6 [D3hot] /sys/bus/platform/devices/808622C1:06 \_SB_.PCI0.I2C7 [D3hot] % modprobe i2c-designware-platform i2c_designware 808622C1:00: Unknown Synopsys component type: 0xffffffff i2c_designware 808622C1:01: Unknown Synopsys component type: 0xffffffff i2c_designware 808622C1:02: Unknown Synopsys component type: 0xffffffff i2c_designware 808622C1:03: Unknown Synopsys component type: 0xffffffff i2c_designware 808622C1:05: Unknown Synopsys component type: 0xffffffff i2c_designware 808622C1:06: Unknown Synopsys component type: 0xffffffff Case 2: The power drain in case of SDHCI. /sys/bus/platform/devices/80860F14:00 \_SB_.PCI0.SDHA [D3hot] /sys/bus/platform/devices/80860F14:01 \_SB_.PCI0.SDHC [D3hot] % modprobe -r sdhci-acpi mmc0: card 0001 removed /sys/bus/platform/devices/80860F14:00 \_SB_.PCI0.SDHA [D0] /sys/bus/platform/devices/80860F14:01 \_SB_.PCI0.SDHC [D0] -------- 8< -------- 8< -------- 8< -------- 8< -------- 8< -------- Patch fixes above problems. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-05 00:49:20 +03:00
}
/* IOSF SB for LPSS island */
#define LPSS_IOSF_UNIT_LPIOEP 0xA0
#define LPSS_IOSF_UNIT_LPIO1 0xAB
#define LPSS_IOSF_UNIT_LPIO2 0xAC
#define LPSS_IOSF_PMCSR 0x84
#define LPSS_PMCSR_D0 0
#define LPSS_PMCSR_D3hot 3
#define LPSS_PMCSR_Dx_MASK GENMASK(1, 0)
#define LPSS_IOSF_GPIODEF0 0x154
#define LPSS_GPIODEF0_DMA1_D3 BIT(2)
#define LPSS_GPIODEF0_DMA2_D3 BIT(3)
#define LPSS_GPIODEF0_DMA_D3_MASK GENMASK(3, 2)
#define LPSS_GPIODEF0_DMA_LLP BIT(13)
static DEFINE_MUTEX(lpss_iosf_mutex);
static bool lpss_iosf_d3_entered = true;
static void lpss_iosf_enter_d3_state(void)
{
u32 value1 = 0;
u32 mask1 = LPSS_GPIODEF0_DMA_D3_MASK | LPSS_GPIODEF0_DMA_LLP;
u32 value2 = LPSS_PMCSR_D3hot;
u32 mask2 = LPSS_PMCSR_Dx_MASK;
/*
* PMC provides an information about actual status of the LPSS devices.
* Here we read the values related to LPSS power island, i.e. LPSS
* devices, excluding both LPSS DMA controllers, along with SCC domain.
*/
u32 func_dis, d3_sts_0, pmc_status;
int ret;
ret = pmc_atom_read(PMC_FUNC_DIS, &func_dis);
if (ret)
return;
mutex_lock(&lpss_iosf_mutex);
ret = pmc_atom_read(PMC_D3_STS_0, &d3_sts_0);
if (ret)
goto exit;
/*
* Get the status of entire LPSS power island per device basis.
* Shutdown both LPSS DMA controllers if and only if all other devices
* are already in D3hot.
*/
pmc_status = (~(d3_sts_0 | func_dis)) & pmc_atom_d3_mask;
if (pmc_status)
goto exit;
iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO1, MBI_CFG_WRITE,
LPSS_IOSF_PMCSR, value2, mask2);
iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO2, MBI_CFG_WRITE,
LPSS_IOSF_PMCSR, value2, mask2);
iosf_mbi_modify(LPSS_IOSF_UNIT_LPIOEP, MBI_CR_WRITE,
LPSS_IOSF_GPIODEF0, value1, mask1);
lpss_iosf_d3_entered = true;
exit:
mutex_unlock(&lpss_iosf_mutex);
}
static void lpss_iosf_exit_d3_state(void)
{
u32 value1 = LPSS_GPIODEF0_DMA1_D3 | LPSS_GPIODEF0_DMA2_D3 |
LPSS_GPIODEF0_DMA_LLP;
u32 mask1 = LPSS_GPIODEF0_DMA_D3_MASK | LPSS_GPIODEF0_DMA_LLP;
u32 value2 = LPSS_PMCSR_D0;
u32 mask2 = LPSS_PMCSR_Dx_MASK;
mutex_lock(&lpss_iosf_mutex);
if (!lpss_iosf_d3_entered)
goto exit;
lpss_iosf_d3_entered = false;
iosf_mbi_modify(LPSS_IOSF_UNIT_LPIOEP, MBI_CR_WRITE,
LPSS_IOSF_GPIODEF0, value1, mask1);
iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO2, MBI_CFG_WRITE,
LPSS_IOSF_PMCSR, value2, mask2);
iosf_mbi_modify(LPSS_IOSF_UNIT_LPIO1, MBI_CFG_WRITE,
LPSS_IOSF_PMCSR, value2, mask2);
exit:
mutex_unlock(&lpss_iosf_mutex);
}
static int acpi_lpss_suspend(struct device *dev, bool wakeup)
{
struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
int ret;
if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
acpi_lpss_save_ctx(dev, pdata);
ret = acpi_dev_suspend(dev, wakeup);
/*
* This call must be last in the sequence, otherwise PMC will return
* wrong status for devices being about to be powered off. See
* lpss_iosf_enter_d3_state() for further information.
*/
if (acpi_target_system_state() == ACPI_STATE_S0 &&
lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available())
lpss_iosf_enter_d3_state();
return ret;
}
static int acpi_lpss_resume(struct device *dev)
{
struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
int ret;
/*
* This call is kept first to be in symmetry with
* acpi_lpss_runtime_suspend() one.
*/
if (lpss_quirks & LPSS_QUIRK_ALWAYS_POWER_ON && iosf_mbi_available())
lpss_iosf_exit_d3_state();
ret = acpi_dev_resume(dev);
if (ret)
return ret;
acpi_lpss_d3_to_d0_delay(pdata);
if (pdata->dev_desc->flags & LPSS_SAVE_CTX)
acpi_lpss_restore_ctx(dev, pdata);
return 0;
}
#ifdef CONFIG_PM_SLEEP
2018-09-23 16:58:11 +03:00
static int acpi_lpss_do_suspend_late(struct device *dev)
{
ACPI / PM: Take SMART_SUSPEND driver flag into account Make the ACPI PM domain take DPM_FLAG_SMART_SUSPEND into account in its system suspend callbacks. [Note that the pm_runtime_suspended() check in acpi_dev_needs_resume() is an optimization, because if is not passed, all of the subsequent checks may be skipped and some of them are much more overhead in general.] Also use the observation that if the device is in runtime suspend at the beginning of the "late" phase of a system-wide suspend-like transition, its state cannot change going forward (runtime PM is disabled for it at that time) until the transition is over and the subsequent system-wide PM callbacks should be skipped for it (as they generally assume the device to not be suspended), so add checks for that in acpi_subsys_suspend_late/noirq() and acpi_subsys_freeze_late/noirq(). Moreover, if acpi_subsys_resume_noirq() is called during the subsequent system-wide resume transition and if the device was left in runtime suspend previously, its runtime PM status needs to be changed to "active" as it is going to be put into the full-power state going forward, so add a check for that too in there. In turn, if acpi_subsys_thaw_noirq() runs after the device has been left in runtime suspend, the subsequent "thaw" callbacks need to be skipped for it (as they may not work correctly with a suspended device), so set the power.direct_complete flag for the device then to make the PM core skip those callbacks. On top of the above, make the analogous changes in the acpi_lpss driver that uses the ACPI PM domain callbacks. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-27 11:10:16 +03:00
int ret;
if (dev_pm_smart_suspend_and_suspended(dev))
return 0;
ACPI / PM: Take SMART_SUSPEND driver flag into account Make the ACPI PM domain take DPM_FLAG_SMART_SUSPEND into account in its system suspend callbacks. [Note that the pm_runtime_suspended() check in acpi_dev_needs_resume() is an optimization, because if is not passed, all of the subsequent checks may be skipped and some of them are much more overhead in general.] Also use the observation that if the device is in runtime suspend at the beginning of the "late" phase of a system-wide suspend-like transition, its state cannot change going forward (runtime PM is disabled for it at that time) until the transition is over and the subsequent system-wide PM callbacks should be skipped for it (as they generally assume the device to not be suspended), so add checks for that in acpi_subsys_suspend_late/noirq() and acpi_subsys_freeze_late/noirq(). Moreover, if acpi_subsys_resume_noirq() is called during the subsequent system-wide resume transition and if the device was left in runtime suspend previously, its runtime PM status needs to be changed to "active" as it is going to be put into the full-power state going forward, so add a check for that too in there. In turn, if acpi_subsys_thaw_noirq() runs after the device has been left in runtime suspend, the subsequent "thaw" callbacks need to be skipped for it (as they may not work correctly with a suspended device), so set the power.direct_complete flag for the device then to make the PM core skip those callbacks. On top of the above, make the analogous changes in the acpi_lpss driver that uses the ACPI PM domain callbacks. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-27 11:10:16 +03:00
ret = pm_generic_suspend_late(dev);
return ret ? ret : acpi_lpss_suspend(dev, device_may_wakeup(dev));
}
2018-09-23 16:58:11 +03:00
static int acpi_lpss_suspend_late(struct device *dev)
{
struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
if (pdata->dev_desc->resume_from_noirq)
return 0;
return acpi_lpss_do_suspend_late(dev);
}
static int acpi_lpss_suspend_noirq(struct device *dev)
{
struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
int ret;
if (pdata->dev_desc->resume_from_noirq) {
ret = acpi_lpss_do_suspend_late(dev);
if (ret)
return ret;
}
return acpi_subsys_suspend_noirq(dev);
}
static int acpi_lpss_do_resume_early(struct device *dev)
{
int ret = acpi_lpss_resume(dev);
return ret ? ret : pm_generic_resume_early(dev);
}
2018-09-23 16:58:11 +03:00
static int acpi_lpss_resume_early(struct device *dev)
{
struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
if (pdata->dev_desc->resume_from_noirq)
return 0;
return acpi_lpss_do_resume_early(dev);
}
static int acpi_lpss_resume_noirq(struct device *dev)
{
struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
int ret;
ret = acpi_subsys_resume_noirq(dev);
if (ret)
return ret;
if (!dev_pm_may_skip_resume(dev) && pdata->dev_desc->resume_from_noirq)
ret = acpi_lpss_do_resume_early(dev);
return ret;
}
#endif /* CONFIG_PM_SLEEP */
static int acpi_lpss_runtime_suspend(struct device *dev)
{
int ret = pm_generic_runtime_suspend(dev);
return ret ? ret : acpi_lpss_suspend(dev, true);
}
static int acpi_lpss_runtime_resume(struct device *dev)
{
int ret = acpi_lpss_resume(dev);
return ret ? ret : pm_generic_runtime_resume(dev);
}
#endif /* CONFIG_PM */
static struct dev_pm_domain acpi_lpss_pm_domain = {
ACPI / LPSS: power on when probe() and otherwise when remove() When LPSS drivers are compiled as a module, which is usually the case, the second probe of that driver may fail because the driver is written in an assumption that device is powered on. That is not the case for all drivers. Moreover we would like not drain power in vain. Implement ->activate() and ->dismiss() callbacks in the ACPI LPSS custom power domain. -------- 8< -------- 8< -------- 8< -------- 8< -------- 8< -------- Case 1: The I2C probe() repeat. /sys/bus/platform/devices/808622C1:00 \_SB_.PCI0.I2C1 [D3hot] /sys/bus/platform/devices/808622C1:01 \_SB_.PCI0.I2C2 [D3hot] /sys/bus/platform/devices/808622C1:02 \_SB_.PCI0.I2C3 [D3hot] /sys/bus/platform/devices/808622C1:03 \_SB_.PCI0.I2C4 [D3hot] /sys/bus/platform/devices/808622C1:05 \_SB_.PCI0.I2C6 [D3hot] /sys/bus/platform/devices/808622C1:06 \_SB_.PCI0.I2C7 [D3hot] % modprobe i2c-designware-platform i2c_designware 808622C1:00: Unknown Synopsys component type: 0xffffffff i2c_designware 808622C1:01: Unknown Synopsys component type: 0xffffffff i2c_designware 808622C1:02: Unknown Synopsys component type: 0xffffffff i2c_designware 808622C1:03: Unknown Synopsys component type: 0xffffffff i2c_designware 808622C1:05: Unknown Synopsys component type: 0xffffffff i2c_designware 808622C1:06: Unknown Synopsys component type: 0xffffffff Case 2: The power drain in case of SDHCI. /sys/bus/platform/devices/80860F14:00 \_SB_.PCI0.SDHA [D3hot] /sys/bus/platform/devices/80860F14:01 \_SB_.PCI0.SDHC [D3hot] % modprobe -r sdhci-acpi mmc0: card 0001 removed /sys/bus/platform/devices/80860F14:00 \_SB_.PCI0.SDHA [D0] /sys/bus/platform/devices/80860F14:01 \_SB_.PCI0.SDHC [D0] -------- 8< -------- 8< -------- 8< -------- 8< -------- 8< -------- Patch fixes above problems. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2015-12-05 00:49:20 +03:00
#ifdef CONFIG_PM
.activate = acpi_lpss_activate,
.dismiss = acpi_lpss_dismiss,
#endif
.ops = {
#ifdef CONFIG_PM
#ifdef CONFIG_PM_SLEEP
.prepare = acpi_subsys_prepare,
.complete = acpi_subsys_complete,
.suspend = acpi_subsys_suspend,
.suspend_late = acpi_lpss_suspend_late,
2018-09-23 16:58:11 +03:00
.suspend_noirq = acpi_lpss_suspend_noirq,
.resume_noirq = acpi_lpss_resume_noirq,
.resume_early = acpi_lpss_resume_early,
.freeze = acpi_subsys_freeze,
ACPI / PM: Take SMART_SUSPEND driver flag into account Make the ACPI PM domain take DPM_FLAG_SMART_SUSPEND into account in its system suspend callbacks. [Note that the pm_runtime_suspended() check in acpi_dev_needs_resume() is an optimization, because if is not passed, all of the subsequent checks may be skipped and some of them are much more overhead in general.] Also use the observation that if the device is in runtime suspend at the beginning of the "late" phase of a system-wide suspend-like transition, its state cannot change going forward (runtime PM is disabled for it at that time) until the transition is over and the subsequent system-wide PM callbacks should be skipped for it (as they generally assume the device to not be suspended), so add checks for that in acpi_subsys_suspend_late/noirq() and acpi_subsys_freeze_late/noirq(). Moreover, if acpi_subsys_resume_noirq() is called during the subsequent system-wide resume transition and if the device was left in runtime suspend previously, its runtime PM status needs to be changed to "active" as it is going to be put into the full-power state going forward, so add a check for that too in there. In turn, if acpi_subsys_thaw_noirq() runs after the device has been left in runtime suspend, the subsequent "thaw" callbacks need to be skipped for it (as they may not work correctly with a suspended device), so set the power.direct_complete flag for the device then to make the PM core skip those callbacks. On top of the above, make the analogous changes in the acpi_lpss driver that uses the ACPI PM domain callbacks. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-27 11:10:16 +03:00
.freeze_late = acpi_subsys_freeze_late,
.freeze_noirq = acpi_subsys_freeze_noirq,
.thaw_noirq = acpi_subsys_thaw_noirq,
.poweroff = acpi_subsys_suspend,
.poweroff_late = acpi_lpss_suspend_late,
ACPI / PM: Take SMART_SUSPEND driver flag into account Make the ACPI PM domain take DPM_FLAG_SMART_SUSPEND into account in its system suspend callbacks. [Note that the pm_runtime_suspended() check in acpi_dev_needs_resume() is an optimization, because if is not passed, all of the subsequent checks may be skipped and some of them are much more overhead in general.] Also use the observation that if the device is in runtime suspend at the beginning of the "late" phase of a system-wide suspend-like transition, its state cannot change going forward (runtime PM is disabled for it at that time) until the transition is over and the subsequent system-wide PM callbacks should be skipped for it (as they generally assume the device to not be suspended), so add checks for that in acpi_subsys_suspend_late/noirq() and acpi_subsys_freeze_late/noirq(). Moreover, if acpi_subsys_resume_noirq() is called during the subsequent system-wide resume transition and if the device was left in runtime suspend previously, its runtime PM status needs to be changed to "active" as it is going to be put into the full-power state going forward, so add a check for that too in there. In turn, if acpi_subsys_thaw_noirq() runs after the device has been left in runtime suspend, the subsequent "thaw" callbacks need to be skipped for it (as they may not work correctly with a suspended device), so set the power.direct_complete flag for the device then to make the PM core skip those callbacks. On top of the above, make the analogous changes in the acpi_lpss driver that uses the ACPI PM domain callbacks. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-27 11:10:16 +03:00
.poweroff_noirq = acpi_subsys_suspend_noirq,
.restore_noirq = acpi_subsys_resume_noirq,
.restore_early = acpi_lpss_resume_early,
#endif
.runtime_suspend = acpi_lpss_runtime_suspend,
.runtime_resume = acpi_lpss_runtime_resume,
#endif
},
};
ACPI / LPSS: Add support for exposing LTR registers to user space Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have registers providing access to LTR (Latency Tolerance Reporting) functionality that allows software to monitor and possibly influence the aggressiveness of the platform's active-state power management. For each LPSS device, there are two modes of operation related to LTR, the auto mode and the software mode. In the auto mode the LTR is set up by the platform firmware and managed by hardware. Software can only read the LTR register values to monitor the platform's behavior. In the software mode it is possible to use LTR to control the extent to which the platform will use its built-in power management features. This changeset adds support for reading the LPSS devices' LTR registers and exposing their values to user space for monitoring and diagnostics purposes. It re-uses the MMIO mappings created to access the LPSS devices' clock registers for reading the values of the LTR registers and exposes them to user space through sysfs device attributes. Namely, a new atrribute group, lpss_ltr, is created for each LPSS device. It contains three new attributes: ltr_mode, auto_ltr, sw_ltr. The value of the ltr_mode attribute reflects the LTR mode being used at the moment (software vs auto) and the other two contain the actual register values (raw) whose meaning depends on the LTR mode. All of these attributes are read-only. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-07 02:46:28 +04:00
static int acpi_lpss_platform_notify(struct notifier_block *nb,
unsigned long action, void *data)
{
struct platform_device *pdev = to_platform_device(data);
struct lpss_private_data *pdata;
struct acpi_device *adev;
const struct acpi_device_id *id;
id = acpi_match_device(acpi_lpss_device_ids, &pdev->dev);
if (!id || !id->driver_data)
return 0;
if (acpi_bus_get_device(ACPI_HANDLE(&pdev->dev), &adev))
return 0;
pdata = acpi_driver_data(adev);
if (!pdata)
ACPI / LPSS: Add support for exposing LTR registers to user space Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have registers providing access to LTR (Latency Tolerance Reporting) functionality that allows software to monitor and possibly influence the aggressiveness of the platform's active-state power management. For each LPSS device, there are two modes of operation related to LTR, the auto mode and the software mode. In the auto mode the LTR is set up by the platform firmware and managed by hardware. Software can only read the LTR register values to monitor the platform's behavior. In the software mode it is possible to use LTR to control the extent to which the platform will use its built-in power management features. This changeset adds support for reading the LPSS devices' LTR registers and exposing their values to user space for monitoring and diagnostics purposes. It re-uses the MMIO mappings created to access the LPSS devices' clock registers for reading the values of the LTR registers and exposes them to user space through sysfs device attributes. Namely, a new atrribute group, lpss_ltr, is created for each LPSS device. It contains three new attributes: ltr_mode, auto_ltr, sw_ltr. The value of the ltr_mode attribute reflects the LTR mode being used at the moment (software vs auto) and the other two contain the actual register values (raw) whose meaning depends on the LTR mode. All of these attributes are read-only. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-07 02:46:28 +04:00
return 0;
if (pdata->mmio_base &&
pdata->mmio_size < pdata->dev_desc->prv_offset + LPSS_LTR_SIZE) {
ACPI / LPSS: Add support for exposing LTR registers to user space Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have registers providing access to LTR (Latency Tolerance Reporting) functionality that allows software to monitor and possibly influence the aggressiveness of the platform's active-state power management. For each LPSS device, there are two modes of operation related to LTR, the auto mode and the software mode. In the auto mode the LTR is set up by the platform firmware and managed by hardware. Software can only read the LTR register values to monitor the platform's behavior. In the software mode it is possible to use LTR to control the extent to which the platform will use its built-in power management features. This changeset adds support for reading the LPSS devices' LTR registers and exposing their values to user space for monitoring and diagnostics purposes. It re-uses the MMIO mappings created to access the LPSS devices' clock registers for reading the values of the LTR registers and exposes them to user space through sysfs device attributes. Namely, a new atrribute group, lpss_ltr, is created for each LPSS device. It contains three new attributes: ltr_mode, auto_ltr, sw_ltr. The value of the ltr_mode attribute reflects the LTR mode being used at the moment (software vs auto) and the other two contain the actual register values (raw) whose meaning depends on the LTR mode. All of these attributes are read-only. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-07 02:46:28 +04:00
dev_err(&pdev->dev, "MMIO size insufficient to access LTR\n");
return 0;
}
switch (action) {
case BUS_NOTIFY_BIND_DRIVER:
dev_pm_domain_set(&pdev->dev, &acpi_lpss_pm_domain);
break;
case BUS_NOTIFY_DRIVER_NOT_BOUND:
case BUS_NOTIFY_UNBOUND_DRIVER:
dev_pm_domain_set(&pdev->dev, NULL);
break;
case BUS_NOTIFY_ADD_DEVICE:
dev_pm_domain_set(&pdev->dev, &acpi_lpss_pm_domain);
if (pdata->dev_desc->flags & LPSS_LTR)
return sysfs_create_group(&pdev->dev.kobj,
&lpss_attr_group);
break;
case BUS_NOTIFY_DEL_DEVICE:
if (pdata->dev_desc->flags & LPSS_LTR)
sysfs_remove_group(&pdev->dev.kobj, &lpss_attr_group);
dev_pm_domain_set(&pdev->dev, NULL);
break;
default:
break;
}
ACPI / LPSS: Add support for exposing LTR registers to user space Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have registers providing access to LTR (Latency Tolerance Reporting) functionality that allows software to monitor and possibly influence the aggressiveness of the platform's active-state power management. For each LPSS device, there are two modes of operation related to LTR, the auto mode and the software mode. In the auto mode the LTR is set up by the platform firmware and managed by hardware. Software can only read the LTR register values to monitor the platform's behavior. In the software mode it is possible to use LTR to control the extent to which the platform will use its built-in power management features. This changeset adds support for reading the LPSS devices' LTR registers and exposing their values to user space for monitoring and diagnostics purposes. It re-uses the MMIO mappings created to access the LPSS devices' clock registers for reading the values of the LTR registers and exposes them to user space through sysfs device attributes. Namely, a new atrribute group, lpss_ltr, is created for each LPSS device. It contains three new attributes: ltr_mode, auto_ltr, sw_ltr. The value of the ltr_mode attribute reflects the LTR mode being used at the moment (software vs auto) and the other two contain the actual register values (raw) whose meaning depends on the LTR mode. All of these attributes are read-only. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-07 02:46:28 +04:00
return 0;
ACPI / LPSS: Add support for exposing LTR registers to user space Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have registers providing access to LTR (Latency Tolerance Reporting) functionality that allows software to monitor and possibly influence the aggressiveness of the platform's active-state power management. For each LPSS device, there are two modes of operation related to LTR, the auto mode and the software mode. In the auto mode the LTR is set up by the platform firmware and managed by hardware. Software can only read the LTR register values to monitor the platform's behavior. In the software mode it is possible to use LTR to control the extent to which the platform will use its built-in power management features. This changeset adds support for reading the LPSS devices' LTR registers and exposing their values to user space for monitoring and diagnostics purposes. It re-uses the MMIO mappings created to access the LPSS devices' clock registers for reading the values of the LTR registers and exposes them to user space through sysfs device attributes. Namely, a new atrribute group, lpss_ltr, is created for each LPSS device. It contains three new attributes: ltr_mode, auto_ltr, sw_ltr. The value of the ltr_mode attribute reflects the LTR mode being used at the moment (software vs auto) and the other two contain the actual register values (raw) whose meaning depends on the LTR mode. All of these attributes are read-only. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-03-07 02:46:28 +04:00
}
static struct notifier_block acpi_lpss_nb = {
.notifier_call = acpi_lpss_platform_notify,
};
static void acpi_lpss_bind(struct device *dev)
{
struct lpss_private_data *pdata = acpi_driver_data(ACPI_COMPANION(dev));
if (!pdata || !pdata->mmio_base || !(pdata->dev_desc->flags & LPSS_LTR))
return;
if (pdata->mmio_size >= pdata->dev_desc->prv_offset + LPSS_LTR_SIZE)
dev->power.set_latency_tolerance = acpi_lpss_set_ltr;
else
dev_err(dev, "MMIO size insufficient to access LTR\n");
}
static void acpi_lpss_unbind(struct device *dev)
{
dev->power.set_latency_tolerance = NULL;
}
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
static struct acpi_scan_handler lpss_handler = {
.ids = acpi_lpss_device_ids,
.attach = acpi_lpss_create_device,
.bind = acpi_lpss_bind,
.unbind = acpi_lpss_unbind,
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
};
void __init acpi_lpss_init(void)
{
const struct x86_cpu_id *id;
int ret;
ret = lpt_clk_init();
if (ret)
return;
id = x86_match_cpu(lpss_cpu_ids);
if (id)
lpss_quirks |= LPSS_QUIRK_ALWAYS_POWER_ON;
bus_register_notifier(&platform_bus_type, &acpi_lpss_nb);
acpi_scan_add_handler(&lpss_handler);
ACPI / scan: Add special handler for Intel Lynxpoint LPSS devices Devices on the Intel Lynxpoint Low Power Subsystem (LPSS) have some common features that aren't shared with any other platform devices, including the clock and LTR (Latency Tolerance Reporting) registers. It is better to handle those features in common code than to bother device drivers with doing that (I/O functionality-wise the LPSS devices are generally compatible with other devices that don't have those special registers and may be handled by the same drivers). The clock registers of the LPSS devices are now taken care of by the special clk-x86-lpss driver, but the MMIO mappings used for accessing those registers can also be used for accessing the LTR registers on those devices (LTR support for the Lynxpoint LPSS is going to be added by a subsequent patch). Thus it is convenient to add a special ACPI scan handler for the Lynxpoint LPSS devices that will create the MMIO mappings for accessing the clock (and LTR in the future) registers and will register the LPSS devices' clocks, so the clk-x86-lpss driver will only need to take care of the main Lynxpoint LPSS clock. Introduce a special ACPI scan handler for Intel Lynxpoint LPSS devices as described above. This also reduces overhead related to browsing the ACPI namespace in search of the LPSS devices before the registration of their clocks, removes some LPSS-specific (and somewhat ugly) code from acpi_platform.c and shrinks the overall code size slightly. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Mike Turquette <mturquette@linaro.org>
2013-03-07 02:46:20 +04:00
}
#else
static struct acpi_scan_handler lpss_handler = {
.ids = acpi_lpss_device_ids,
};
void __init acpi_lpss_init(void)
{
acpi_scan_add_handler(&lpss_handler);
}
#endif /* CONFIG_X86_INTEL_LPSS */