2019-06-01 11:08:57 +03:00
|
|
|
/* SPDX-License-Identifier: GPL-2.0-only */
|
drm/pl111: Initial drm/kms driver for pl111
This is a modesetting driver for the pl111 CLCD display controller
found on various ARM platforms such as the Versatile Express. The
driver has only been tested on the bcm911360_entphn platform so far,
with PRIME-based buffer sharing between vc4 and clcd.
It reuses the existing devicetree binding, while not using quite as
many of its properties as the fbdev driver does (those are left for
future work).
v2: Nearly complete rewrite by anholt, cutting 2/3 of the code thanks
to DRM core's excellent new helpers.
v3: Don't match pl110 any more, don't attach if we don't have a DRM
panel, use DRM_GEM_CMA_FOPS, update MAINTAINERS, use the simple
display helper, use drm_gem_cma_dumb_create (same as our wrapper).
v4: Change the driver's .name to not clash with fbdev in sysfs, drop
platform alias, drop redundant "drm" in DRM driver name, hook up
.prepare_fb to the CMA helper so that DMA fences should work.
v5: Move register definitions inside the driver directory, fix build
in COMPILE_TEST and !AMBA mode.
v6: Drop TIM2_CLKSEL for now to be consistent with existing DT
bindings, switch back to external register definitions.
Signed-off-by: Tom Cooksey <tom.cooksey@arm.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org> (v5)
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170413031746.12921-2-eric@anholt.net
2017-04-13 06:17:46 +03:00
|
|
|
/*
|
|
|
|
*
|
|
|
|
* (C) COPYRIGHT 2012-2013 ARM Limited. All rights reserved.
|
|
|
|
*
|
|
|
|
* Parts of this file were based on sources as follows:
|
|
|
|
*
|
|
|
|
* Copyright (c) 2006-2008 Intel Corporation
|
|
|
|
* Copyright (c) 2007 Dave Airlie <airlied@linux.ie>
|
|
|
|
* Copyright (C) 2011 Texas Instruments
|
|
|
|
*/
|
|
|
|
|
|
|
|
#ifndef _PL111_DRM_H_
|
|
|
|
#define _PL111_DRM_H_
|
|
|
|
|
2019-07-16 09:42:04 +03:00
|
|
|
#include <linux/clk-provider.h>
|
|
|
|
#include <linux/interrupt.h>
|
|
|
|
|
|
|
|
#include <drm/drm_bridge.h>
|
2017-09-08 15:47:05 +03:00
|
|
|
#include <drm/drm_connector.h>
|
|
|
|
#include <drm/drm_encoder.h>
|
2019-07-16 09:42:04 +03:00
|
|
|
#include <drm/drm_gem.h>
|
2017-09-08 15:47:05 +03:00
|
|
|
#include <drm/drm_panel.h>
|
2019-07-16 09:42:04 +03:00
|
|
|
#include <drm/drm_simple_kms_helper.h>
|
drm/pl111: Initial drm/kms driver for pl111
This is a modesetting driver for the pl111 CLCD display controller
found on various ARM platforms such as the Versatile Express. The
driver has only been tested on the bcm911360_entphn platform so far,
with PRIME-based buffer sharing between vc4 and clcd.
It reuses the existing devicetree binding, while not using quite as
many of its properties as the fbdev driver does (those are left for
future work).
v2: Nearly complete rewrite by anholt, cutting 2/3 of the code thanks
to DRM core's excellent new helpers.
v3: Don't match pl110 any more, don't attach if we don't have a DRM
panel, use DRM_GEM_CMA_FOPS, update MAINTAINERS, use the simple
display helper, use drm_gem_cma_dumb_create (same as our wrapper).
v4: Change the driver's .name to not clash with fbdev in sysfs, drop
platform alias, drop redundant "drm" in DRM driver name, hook up
.prepare_fb to the CMA helper so that DMA fences should work.
v5: Move register definitions inside the driver directory, fix build
in COMPILE_TEST and !AMBA mode.
v6: Drop TIM2_CLKSEL for now to be consistent with existing DT
bindings, switch back to external register definitions.
Signed-off-by: Tom Cooksey <tom.cooksey@arm.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org> (v5)
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170413031746.12921-2-eric@anholt.net
2017-04-13 06:17:46 +03:00
|
|
|
|
2020-06-09 23:04:45 +03:00
|
|
|
/*
|
|
|
|
* CLCD Controller Internal Register addresses
|
|
|
|
*/
|
|
|
|
#define CLCD_TIM0 0x00000000
|
|
|
|
#define CLCD_TIM1 0x00000004
|
|
|
|
#define CLCD_TIM2 0x00000008
|
|
|
|
#define CLCD_TIM3 0x0000000c
|
|
|
|
#define CLCD_UBAS 0x00000010
|
|
|
|
#define CLCD_LBAS 0x00000014
|
|
|
|
|
|
|
|
#define CLCD_PL110_IENB 0x00000018
|
|
|
|
#define CLCD_PL110_CNTL 0x0000001c
|
|
|
|
#define CLCD_PL110_STAT 0x00000020
|
|
|
|
#define CLCD_PL110_INTR 0x00000024
|
|
|
|
#define CLCD_PL110_UCUR 0x00000028
|
|
|
|
#define CLCD_PL110_LCUR 0x0000002C
|
|
|
|
|
|
|
|
#define CLCD_PL111_CNTL 0x00000018
|
|
|
|
#define CLCD_PL111_IENB 0x0000001c
|
|
|
|
#define CLCD_PL111_RIS 0x00000020
|
|
|
|
#define CLCD_PL111_MIS 0x00000024
|
|
|
|
#define CLCD_PL111_ICR 0x00000028
|
|
|
|
#define CLCD_PL111_UCUR 0x0000002c
|
|
|
|
#define CLCD_PL111_LCUR 0x00000030
|
|
|
|
|
|
|
|
#define CLCD_PALL 0x00000200
|
|
|
|
#define CLCD_PALETTE 0x00000200
|
|
|
|
|
|
|
|
#define TIM2_PCD_LO_MASK GENMASK(4, 0)
|
|
|
|
#define TIM2_PCD_LO_BITS 5
|
|
|
|
#define TIM2_CLKSEL (1 << 5)
|
|
|
|
#define TIM2_ACB_MASK GENMASK(10, 6)
|
|
|
|
#define TIM2_IVS (1 << 11)
|
|
|
|
#define TIM2_IHS (1 << 12)
|
|
|
|
#define TIM2_IPC (1 << 13)
|
|
|
|
#define TIM2_IOE (1 << 14)
|
|
|
|
#define TIM2_BCD (1 << 26)
|
|
|
|
#define TIM2_PCD_HI_MASK GENMASK(31, 27)
|
|
|
|
#define TIM2_PCD_HI_BITS 5
|
|
|
|
#define TIM2_PCD_HI_SHIFT 27
|
|
|
|
|
|
|
|
#define CNTL_LCDEN (1 << 0)
|
|
|
|
#define CNTL_LCDBPP1 (0 << 1)
|
|
|
|
#define CNTL_LCDBPP2 (1 << 1)
|
|
|
|
#define CNTL_LCDBPP4 (2 << 1)
|
|
|
|
#define CNTL_LCDBPP8 (3 << 1)
|
|
|
|
#define CNTL_LCDBPP16 (4 << 1)
|
|
|
|
#define CNTL_LCDBPP16_565 (6 << 1)
|
|
|
|
#define CNTL_LCDBPP16_444 (7 << 1)
|
|
|
|
#define CNTL_LCDBPP24 (5 << 1)
|
|
|
|
#define CNTL_LCDBW (1 << 4)
|
|
|
|
#define CNTL_LCDTFT (1 << 5)
|
|
|
|
#define CNTL_LCDMONO8 (1 << 6)
|
|
|
|
#define CNTL_LCDDUAL (1 << 7)
|
|
|
|
#define CNTL_BGR (1 << 8)
|
|
|
|
#define CNTL_BEBO (1 << 9)
|
|
|
|
#define CNTL_BEPO (1 << 10)
|
|
|
|
#define CNTL_LCDPWR (1 << 11)
|
|
|
|
#define CNTL_LCDVCOMP(x) ((x) << 12)
|
|
|
|
#define CNTL_LDMAFIFOTIME (1 << 15)
|
|
|
|
#define CNTL_WATERMARK (1 << 16)
|
|
|
|
|
|
|
|
/* ST Microelectronics variant bits */
|
|
|
|
#define CNTL_ST_1XBPP_444 0x0
|
|
|
|
#define CNTL_ST_1XBPP_5551 (1 << 17)
|
|
|
|
#define CNTL_ST_1XBPP_565 (1 << 18)
|
|
|
|
#define CNTL_ST_CDWID_12 0x0
|
|
|
|
#define CNTL_ST_CDWID_16 (1 << 19)
|
|
|
|
#define CNTL_ST_CDWID_18 (1 << 20)
|
|
|
|
#define CNTL_ST_CDWID_24 ((1 << 19) | (1 << 20))
|
|
|
|
#define CNTL_ST_CEAEN (1 << 21)
|
|
|
|
#define CNTL_ST_LCDBPP24_PACKED (6 << 1)
|
|
|
|
|
drm/pl111: Initial drm/kms driver for pl111
This is a modesetting driver for the pl111 CLCD display controller
found on various ARM platforms such as the Versatile Express. The
driver has only been tested on the bcm911360_entphn platform so far,
with PRIME-based buffer sharing between vc4 and clcd.
It reuses the existing devicetree binding, while not using quite as
many of its properties as the fbdev driver does (those are left for
future work).
v2: Nearly complete rewrite by anholt, cutting 2/3 of the code thanks
to DRM core's excellent new helpers.
v3: Don't match pl110 any more, don't attach if we don't have a DRM
panel, use DRM_GEM_CMA_FOPS, update MAINTAINERS, use the simple
display helper, use drm_gem_cma_dumb_create (same as our wrapper).
v4: Change the driver's .name to not clash with fbdev in sysfs, drop
platform alias, drop redundant "drm" in DRM driver name, hook up
.prepare_fb to the CMA helper so that DMA fences should work.
v5: Move register definitions inside the driver directory, fix build
in COMPILE_TEST and !AMBA mode.
v6: Drop TIM2_CLKSEL for now to be consistent with existing DT
bindings, switch back to external register definitions.
Signed-off-by: Tom Cooksey <tom.cooksey@arm.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org> (v5)
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170413031746.12921-2-eric@anholt.net
2017-04-13 06:17:46 +03:00
|
|
|
#define CLCD_IRQ_NEXTBASE_UPDATE BIT(2)
|
|
|
|
|
2017-05-18 03:56:40 +03:00
|
|
|
struct drm_minor;
|
|
|
|
|
2017-09-08 15:47:06 +03:00
|
|
|
/**
|
|
|
|
* struct pl111_variant_data - encodes IP differences
|
|
|
|
* @name: the name of this variant
|
|
|
|
* @is_pl110: this is the early PL110 variant
|
2018-06-21 21:44:50 +03:00
|
|
|
* @is_lcdc: this is the ST Microelectronics Nomadik LCDC variant
|
2018-02-06 12:35:36 +03:00
|
|
|
* @external_bgr: this is the Versatile Pl110 variant with external
|
|
|
|
* BGR/RGB routing
|
2018-02-06 12:35:38 +03:00
|
|
|
* @broken_clockdivider: the clock divider is broken and we need to
|
|
|
|
* use the supplied clock directly
|
2018-02-06 12:35:39 +03:00
|
|
|
* @broken_vblank: the vblank IRQ is broken on this variant
|
2018-06-21 21:44:50 +03:00
|
|
|
* @st_bitmux_control: this variant is using the ST Micro bitmux
|
|
|
|
* extensions to the control register
|
2017-09-08 15:47:06 +03:00
|
|
|
* @formats: array of supported pixel formats on this variant
|
|
|
|
* @nformats: the length of the array of supported pixel formats
|
2018-03-02 12:09:45 +03:00
|
|
|
* @fb_bpp: desired bits per pixel on the default framebuffer
|
2017-09-08 15:47:06 +03:00
|
|
|
*/
|
|
|
|
struct pl111_variant_data {
|
|
|
|
const char *name;
|
|
|
|
bool is_pl110;
|
2018-06-21 21:44:50 +03:00
|
|
|
bool is_lcdc;
|
2018-02-06 12:35:36 +03:00
|
|
|
bool external_bgr;
|
2018-02-06 12:35:38 +03:00
|
|
|
bool broken_clockdivider;
|
2018-02-06 12:35:39 +03:00
|
|
|
bool broken_vblank;
|
2018-06-21 21:44:50 +03:00
|
|
|
bool st_bitmux_control;
|
2017-09-08 15:47:06 +03:00
|
|
|
const u32 *formats;
|
|
|
|
unsigned int nformats;
|
2018-03-02 12:09:45 +03:00
|
|
|
unsigned int fb_bpp;
|
2017-09-08 15:47:06 +03:00
|
|
|
};
|
|
|
|
|
drm/pl111: Initial drm/kms driver for pl111
This is a modesetting driver for the pl111 CLCD display controller
found on various ARM platforms such as the Versatile Express. The
driver has only been tested on the bcm911360_entphn platform so far,
with PRIME-based buffer sharing between vc4 and clcd.
It reuses the existing devicetree binding, while not using quite as
many of its properties as the fbdev driver does (those are left for
future work).
v2: Nearly complete rewrite by anholt, cutting 2/3 of the code thanks
to DRM core's excellent new helpers.
v3: Don't match pl110 any more, don't attach if we don't have a DRM
panel, use DRM_GEM_CMA_FOPS, update MAINTAINERS, use the simple
display helper, use drm_gem_cma_dumb_create (same as our wrapper).
v4: Change the driver's .name to not clash with fbdev in sysfs, drop
platform alias, drop redundant "drm" in DRM driver name, hook up
.prepare_fb to the CMA helper so that DMA fences should work.
v5: Move register definitions inside the driver directory, fix build
in COMPILE_TEST and !AMBA mode.
v6: Drop TIM2_CLKSEL for now to be consistent with existing DT
bindings, switch back to external register definitions.
Signed-off-by: Tom Cooksey <tom.cooksey@arm.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org> (v5)
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170413031746.12921-2-eric@anholt.net
2017-04-13 06:17:46 +03:00
|
|
|
struct pl111_drm_dev_private {
|
|
|
|
struct drm_device *drm;
|
|
|
|
|
2017-09-08 15:47:05 +03:00
|
|
|
struct drm_connector *connector;
|
|
|
|
struct drm_panel *panel;
|
|
|
|
struct drm_bridge *bridge;
|
drm/pl111: Initial drm/kms driver for pl111
This is a modesetting driver for the pl111 CLCD display controller
found on various ARM platforms such as the Versatile Express. The
driver has only been tested on the bcm911360_entphn platform so far,
with PRIME-based buffer sharing between vc4 and clcd.
It reuses the existing devicetree binding, while not using quite as
many of its properties as the fbdev driver does (those are left for
future work).
v2: Nearly complete rewrite by anholt, cutting 2/3 of the code thanks
to DRM core's excellent new helpers.
v3: Don't match pl110 any more, don't attach if we don't have a DRM
panel, use DRM_GEM_CMA_FOPS, update MAINTAINERS, use the simple
display helper, use drm_gem_cma_dumb_create (same as our wrapper).
v4: Change the driver's .name to not clash with fbdev in sysfs, drop
platform alias, drop redundant "drm" in DRM driver name, hook up
.prepare_fb to the CMA helper so that DMA fences should work.
v5: Move register definitions inside the driver directory, fix build
in COMPILE_TEST and !AMBA mode.
v6: Drop TIM2_CLKSEL for now to be consistent with existing DT
bindings, switch back to external register definitions.
Signed-off-by: Tom Cooksey <tom.cooksey@arm.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org> (v5)
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170413031746.12921-2-eric@anholt.net
2017-04-13 06:17:46 +03:00
|
|
|
struct drm_simple_display_pipe pipe;
|
|
|
|
|
|
|
|
void *regs;
|
2018-03-08 00:58:19 +03:00
|
|
|
u32 memory_bw;
|
2017-09-08 15:47:06 +03:00
|
|
|
u32 ienb;
|
|
|
|
u32 ctrl;
|
2017-05-08 22:33:48 +03:00
|
|
|
/* The pixel clock (a reference to our clock divider off of CLCDCLK). */
|
drm/pl111: Initial drm/kms driver for pl111
This is a modesetting driver for the pl111 CLCD display controller
found on various ARM platforms such as the Versatile Express. The
driver has only been tested on the bcm911360_entphn platform so far,
with PRIME-based buffer sharing between vc4 and clcd.
It reuses the existing devicetree binding, while not using quite as
many of its properties as the fbdev driver does (those are left for
future work).
v2: Nearly complete rewrite by anholt, cutting 2/3 of the code thanks
to DRM core's excellent new helpers.
v3: Don't match pl110 any more, don't attach if we don't have a DRM
panel, use DRM_GEM_CMA_FOPS, update MAINTAINERS, use the simple
display helper, use drm_gem_cma_dumb_create (same as our wrapper).
v4: Change the driver's .name to not clash with fbdev in sysfs, drop
platform alias, drop redundant "drm" in DRM driver name, hook up
.prepare_fb to the CMA helper so that DMA fences should work.
v5: Move register definitions inside the driver directory, fix build
in COMPILE_TEST and !AMBA mode.
v6: Drop TIM2_CLKSEL for now to be consistent with existing DT
bindings, switch back to external register definitions.
Signed-off-by: Tom Cooksey <tom.cooksey@arm.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org> (v5)
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170413031746.12921-2-eric@anholt.net
2017-04-13 06:17:46 +03:00
|
|
|
struct clk *clk;
|
2017-05-08 22:33:48 +03:00
|
|
|
/* pl111's internal clock divider. */
|
|
|
|
struct clk_hw clk_div;
|
|
|
|
/* Lock to sync access to CLCD_TIM2 between the common clock
|
|
|
|
* subsystem and pl111_display_enable().
|
|
|
|
*/
|
|
|
|
spinlock_t tim2_lock;
|
2017-09-08 15:47:06 +03:00
|
|
|
const struct pl111_variant_data *variant;
|
2017-09-08 15:47:08 +03:00
|
|
|
void (*variant_display_enable) (struct drm_device *drm, u32 format);
|
|
|
|
void (*variant_display_disable) (struct drm_device *drm);
|
2018-05-02 16:47:19 +03:00
|
|
|
bool use_device_memory;
|
drm/pl111: Initial drm/kms driver for pl111
This is a modesetting driver for the pl111 CLCD display controller
found on various ARM platforms such as the Versatile Express. The
driver has only been tested on the bcm911360_entphn platform so far,
with PRIME-based buffer sharing between vc4 and clcd.
It reuses the existing devicetree binding, while not using quite as
many of its properties as the fbdev driver does (those are left for
future work).
v2: Nearly complete rewrite by anholt, cutting 2/3 of the code thanks
to DRM core's excellent new helpers.
v3: Don't match pl110 any more, don't attach if we don't have a DRM
panel, use DRM_GEM_CMA_FOPS, update MAINTAINERS, use the simple
display helper, use drm_gem_cma_dumb_create (same as our wrapper).
v4: Change the driver's .name to not clash with fbdev in sysfs, drop
platform alias, drop redundant "drm" in DRM driver name, hook up
.prepare_fb to the CMA helper so that DMA fences should work.
v5: Move register definitions inside the driver directory, fix build
in COMPILE_TEST and !AMBA mode.
v6: Drop TIM2_CLKSEL for now to be consistent with existing DT
bindings, switch back to external register definitions.
Signed-off-by: Tom Cooksey <tom.cooksey@arm.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org> (v5)
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170413031746.12921-2-eric@anholt.net
2017-04-13 06:17:46 +03:00
|
|
|
};
|
|
|
|
|
|
|
|
int pl111_display_init(struct drm_device *dev);
|
|
|
|
irqreturn_t pl111_irq(int irq, void *data);
|
2020-03-10 16:31:21 +03:00
|
|
|
void pl111_debugfs_init(struct drm_minor *minor);
|
drm/pl111: Initial drm/kms driver for pl111
This is a modesetting driver for the pl111 CLCD display controller
found on various ARM platforms such as the Versatile Express. The
driver has only been tested on the bcm911360_entphn platform so far,
with PRIME-based buffer sharing between vc4 and clcd.
It reuses the existing devicetree binding, while not using quite as
many of its properties as the fbdev driver does (those are left for
future work).
v2: Nearly complete rewrite by anholt, cutting 2/3 of the code thanks
to DRM core's excellent new helpers.
v3: Don't match pl110 any more, don't attach if we don't have a DRM
panel, use DRM_GEM_CMA_FOPS, update MAINTAINERS, use the simple
display helper, use drm_gem_cma_dumb_create (same as our wrapper).
v4: Change the driver's .name to not clash with fbdev in sysfs, drop
platform alias, drop redundant "drm" in DRM driver name, hook up
.prepare_fb to the CMA helper so that DMA fences should work.
v5: Move register definitions inside the driver directory, fix build
in COMPILE_TEST and !AMBA mode.
v6: Drop TIM2_CLKSEL for now to be consistent with existing DT
bindings, switch back to external register definitions.
Signed-off-by: Tom Cooksey <tom.cooksey@arm.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org> (v5)
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170413031746.12921-2-eric@anholt.net
2017-04-13 06:17:46 +03:00
|
|
|
|
|
|
|
#endif /* _PL111_DRM_H_ */
|