WSL2-Linux-Kernel/arch/arm/boot/dts/imx6sl-evk.dts

/*
 * Copyright (C) 2013 Freescale Semiconductor, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 */

/dts-v1/;

#include "imx6sl.dtsi"

/ {
	model = "Freescale i.MX6 SoloLite EVK Board";
	compatible = "fsl,imx6sl-evk", "fsl,imx6sl";

	memory {
		reg = <0x80000000 0x40000000>;
	};

	regulators {
		compatible = "simple-bus";
		#address-cells = <1>;
		#size-cells = <0>;

		reg_usb_otg1_vbus: regulator@0 {
			compatible = "regulator-fixed";
			reg = <0>;
			regulator-name = "usb_otg1_vbus";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			gpio = <&gpio4 0 0>;
			enable-active-high;
		};

		reg_usb_otg2_vbus: regulator@1 {
			compatible = "regulator-fixed";
			reg = <1>;
			regulator-name = "usb_otg2_vbus";
			regulator-min-microvolt = <5000000>;
			regulator-max-microvolt = <5000000>;
			gpio = <&gpio4 2 0>;
			enable-active-high;
		};
	};
};

&ecspi1 {
	fsl,spi-num-chipselects = <1>;
	cs-gpios = <&gpio4 11 0>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_ecspi1>;
	status = "okay";

	flash: m25p80@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "st,m25p32";
		spi-max-frequency = <20000000>;
		reg = <0>;
	};
};

&fec {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_fec>;
	phy-mode = "rmii";
	status = "okay";
};

&iomuxc {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_hog>;

	imx6sl-evk {
		pinctrl_hog: hoggrp {
			fsl,pins = <
				MX6SL_PAD_KEY_ROW7__GPIO4_IO07    0x17059
				MX6SL_PAD_KEY_COL7__GPIO4_IO06    0x17059
				MX6SL_PAD_SD2_DAT7__GPIO5_IO00    0x17059
				MX6SL_PAD_SD2_DAT6__GPIO4_IO29    0x17059
				MX6SL_PAD_REF_CLK_32K__GPIO3_IO22 0x17059
				MX6SL_PAD_KEY_COL4__GPIO4_IO00	0x80000000
				MX6SL_PAD_KEY_COL5__GPIO4_IO02	0x80000000
			>;
		};

		pinctrl_ecspi1: ecspi1grp {
			fsl,pins = <
				MX6SL_PAD_ECSPI1_MISO__ECSPI1_MISO	0x100b1
				MX6SL_PAD_ECSPI1_MOSI__ECSPI1_MOSI	0x100b1
				MX6SL_PAD_ECSPI1_SCLK__ECSPI1_SCLK	0x100b1
			>;
		};

		pinctrl_fec: fecgrp {
			fsl,pins = <
				MX6SL_PAD_FEC_MDC__FEC_MDC		0x1b0b0
				MX6SL_PAD_FEC_MDIO__FEC_MDIO		0x1b0b0
				MX6SL_PAD_FEC_CRS_DV__FEC_RX_DV		0x1b0b0
				MX6SL_PAD_FEC_RXD0__FEC_RX_DATA0	0x1b0b0
				MX6SL_PAD_FEC_RXD1__FEC_RX_DATA1	0x1b0b0
				MX6SL_PAD_FEC_TX_EN__FEC_TX_EN		0x1b0b0
				MX6SL_PAD_FEC_TXD0__FEC_TX_DATA0	0x1b0b0
				MX6SL_PAD_FEC_TXD1__FEC_TX_DATA1	0x1b0b0
				MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT	0x4001b0a8
			>;
		};

		pinctrl_uart1: uart1grp {
			fsl,pins = <
				MX6SL_PAD_UART1_RXD__UART1_RX_DATA	0x1b0b1
				MX6SL_PAD_UART1_TXD__UART1_TX_DATA	0x1b0b1
			>;
		};

		pinctrl_usbotg1: usbotg1grp {
			fsl,pins = <
				MX6SL_PAD_EPDC_PWRCOM__USB_OTG1_ID	0x17059
			>;
		};

		pinctrl_usdhc1: usdhc1grp {
			fsl,pins = <
				MX6SL_PAD_SD1_CMD__SD1_CMD		0x17059
				MX6SL_PAD_SD1_CLK__SD1_CLK		0x10059
				MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x17059
				MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x17059
				MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x17059
				MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x17059
				MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x17059
				MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x17059
				MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x17059
				MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x17059
			>;
		};

		pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
			fsl,pins = <
				MX6SL_PAD_SD1_CMD__SD1_CMD		0x170b9
				MX6SL_PAD_SD1_CLK__SD1_CLK		0x100b9
				MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x170b9
				MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x170b9
				MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x170b9
				MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x170b9
				MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x170b9
				MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x170b9
				MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x170b9
				MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x170b9
			>;
		};

		pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
			fsl,pins = <
				MX6SL_PAD_SD1_CMD__SD1_CMD		0x170f9
				MX6SL_PAD_SD1_CLK__SD1_CLK		0x100f9
				MX6SL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
				MX6SL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
				MX6SL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
				MX6SL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
				MX6SL_PAD_SD1_DAT4__SD1_DATA4		0x170f9
				MX6SL_PAD_SD1_DAT5__SD1_DATA5		0x170f9
				MX6SL_PAD_SD1_DAT6__SD1_DATA6		0x170f9
				MX6SL_PAD_SD1_DAT7__SD1_DATA7		0x170f9
			>;
		};

		pinctrl_usdhc2: usdhc2grp {
			fsl,pins = <
				MX6SL_PAD_SD2_CMD__SD2_CMD		0x17059
				MX6SL_PAD_SD2_CLK__SD2_CLK		0x10059
				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x17059
				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x17059
				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x17059
				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x17059
			>;
		};

		pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
			fsl,pins = <
				MX6SL_PAD_SD2_CMD__SD2_CMD		0x170b9
				MX6SL_PAD_SD2_CLK__SD2_CLK		0x100b9
				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
			>;
		};

		pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
			fsl,pins = <
				MX6SL_PAD_SD2_CMD__SD2_CMD		0x170f9
				MX6SL_PAD_SD2_CLK__SD2_CLK		0x100f9
				MX6SL_PAD_SD2_DAT0__SD2_DATA0		0x170f9
				MX6SL_PAD_SD2_DAT1__SD2_DATA1		0x170f9
				MX6SL_PAD_SD2_DAT2__SD2_DATA2		0x170f9
				MX6SL_PAD_SD2_DAT3__SD2_DATA3		0x170f9
			>;
		};

		pinctrl_usdhc3: usdhc3grp {
			fsl,pins = <
				MX6SL_PAD_SD3_CMD__SD3_CMD		0x17059
				MX6SL_PAD_SD3_CLK__SD3_CLK		0x10059
				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x17059
				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x17059
				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x17059
				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x17059
			>;
		};

		pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
			fsl,pins = <
				MX6SL_PAD_SD3_CMD__SD3_CMD		0x170b9
				MX6SL_PAD_SD3_CLK__SD3_CLK		0x100b9
				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x170b9
				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x170b9
				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x170b9
				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x170b9
			>;
		};

		pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
			fsl,pins = <
				MX6SL_PAD_SD3_CMD__SD3_CMD		0x170f9
				MX6SL_PAD_SD3_CLK__SD3_CLK		0x100f9
				MX6SL_PAD_SD3_DAT0__SD3_DATA0		0x170f9
				MX6SL_PAD_SD3_DAT1__SD3_DATA1		0x170f9
				MX6SL_PAD_SD3_DAT2__SD3_DATA2		0x170f9
				MX6SL_PAD_SD3_DAT3__SD3_DATA3		0x170f9
			>;
		};
	};
};

&uart1 {
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_uart1>;
	status = "okay";
};

&usbotg1 {
	vbus-supply = <&reg_usb_otg1_vbus>;
	pinctrl-names = "default";
	pinctrl-0 = <&pinctrl_usbotg1>;
	disable-over-current;
	status = "okay";
};

&usbotg2 {
	vbus-supply = <&reg_usb_otg2_vbus>;
	dr_mode = "host";
	disable-over-current;
	status = "okay";
};

&usdhc1 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc1>;
	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
	bus-width = <8>;
	cd-gpios = <&gpio4 7 0>;
	wp-gpios = <&gpio4 6 0>;
	status = "okay";
};

&usdhc2 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc2>;
	pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
	pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
	cd-gpios = <&gpio5 0 0>;
	wp-gpios = <&gpio4 29 0>;
	status = "okay";
};

&usdhc3 {
	pinctrl-names = "default", "state_100mhz", "state_200mhz";
	pinctrl-0 = <&pinctrl_usdhc3>;
	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
	cd-gpios = <&gpio3 22 0>;
	status = "okay";
};