WSL2-Linux-Kernel/drivers/mfd/da9052-i2c.c

213 строки
4.6 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* I2C access for DA9052 PMICs.
*
* Copyright(c) 2011 Dialog Semiconductor Ltd.
*
* Author: David Dajun Chen <dchen@diasemi.com>
*/
#include <linux/device.h>
#include <linux/module.h>
#include <linux/input.h>
#include <linux/mfd/core.h>
#include <linux/i2c.h>
#include <linux/err.h>
#include <linux/mfd/da9052/da9052.h>
#include <linux/mfd/da9052/reg.h>
#ifdef CONFIG_OF
#include <linux/of.h>
#include <linux/of_device.h>
#endif
/* I2C safe register check */
static inline bool i2c_safe_reg(unsigned char reg)
{
switch (reg) {
case DA9052_STATUS_A_REG:
case DA9052_STATUS_B_REG:
case DA9052_STATUS_C_REG:
case DA9052_STATUS_D_REG:
case DA9052_ADC_RES_L_REG:
case DA9052_ADC_RES_H_REG:
case DA9052_VDD_RES_REG:
case DA9052_ICHG_AV_REG:
case DA9052_TBAT_RES_REG:
case DA9052_ADCIN4_RES_REG:
case DA9052_ADCIN5_RES_REG:
case DA9052_ADCIN6_RES_REG:
case DA9052_TJUNC_RES_REG:
case DA9052_TSI_X_MSB_REG:
case DA9052_TSI_Y_MSB_REG:
case DA9052_TSI_LSB_REG:
case DA9052_TSI_Z_MSB_REG:
return true;
default:
return false;
}
}
/*
* There is an issue with DA9052 and DA9053_AA/BA/BB PMIC where the PMIC
* gets lockup up or fails to respond following a system reset.
* This fix is to follow any read or write with a dummy read to a safe
* register.
*/
static int da9052_i2c_fix(struct da9052 *da9052, unsigned char reg)
{
int val;
switch (da9052->chip_id) {
case DA9052:
case DA9053_AA:
case DA9053_BA:
case DA9053_BB:
/* A dummy read to a safe register address. */
if (!i2c_safe_reg(reg))
return regmap_read(da9052->regmap,
DA9052_PARK_REGISTER,
&val);
break;
case DA9053_BC:
default:
/*
* For other chips parking of I2C register
* to a safe place is not required.
*/
break;
}
return 0;
}
/*
* According to errata item 24, multiwrite mode should be avoided
* in order to prevent register data corruption after power-down.
*/
static int da9052_i2c_disable_multiwrite(struct da9052 *da9052)
{
int reg_val, ret;
ret = regmap_read(da9052->regmap, DA9052_CONTROL_B_REG, &reg_val);
if (ret < 0)
return ret;
if (!(reg_val & DA9052_CONTROL_B_WRITEMODE)) {
reg_val |= DA9052_CONTROL_B_WRITEMODE;
ret = regmap_write(da9052->regmap, DA9052_CONTROL_B_REG,
reg_val);
if (ret < 0)
return ret;
}
return 0;
}
static const struct i2c_device_id da9052_i2c_id[] = {
{"da9052", DA9052},
{"da9053-aa", DA9053_AA},
{"da9053-ba", DA9053_BA},
{"da9053-bb", DA9053_BB},
{"da9053-bc", DA9053_BC},
{}
};
MODULE_DEVICE_TABLE(i2c, da9052_i2c_id);
#ifdef CONFIG_OF
static const struct of_device_id dialog_dt_ids[] = {
{ .compatible = "dlg,da9052", .data = &da9052_i2c_id[0] },
{ .compatible = "dlg,da9053-aa", .data = &da9052_i2c_id[1] },
{ .compatible = "dlg,da9053-ba", .data = &da9052_i2c_id[2] },
{ .compatible = "dlg,da9053-bb", .data = &da9052_i2c_id[3] },
{ .compatible = "dlg,da9053-bc", .data = &da9052_i2c_id[4] },
{ /* sentinel */ }
};
#endif
static int da9052_i2c_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct da9052 *da9052;
int ret;
da9052 = devm_kzalloc(&client->dev, sizeof(struct da9052), GFP_KERNEL);
if (!da9052)
return -ENOMEM;
da9052->dev = &client->dev;
da9052->chip_irq = client->irq;
da9052->fix_io = da9052_i2c_fix;
i2c_set_clientdata(client, da9052);
da9052->regmap = devm_regmap_init_i2c(client, &da9052_regmap_config);
if (IS_ERR(da9052->regmap)) {
ret = PTR_ERR(da9052->regmap);
dev_err(&client->dev, "Failed to allocate register map: %d\n",
ret);
return ret;
}
ret = da9052_i2c_disable_multiwrite(da9052);
if (ret < 0)
return ret;
#ifdef CONFIG_OF
if (!id)
id = of_device_get_match_data(&client->dev);
#endif
if (!id) {
ret = -ENODEV;
dev_err(&client->dev, "id is null.\n");
return ret;
}
return da9052_device_init(da9052, id->driver_data);
}
i2c: Make remove callback return void The value returned by an i2c driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com> Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Crt Mori <cmo@melexis.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013 Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/* Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5 Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860 Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-15 11:02:30 +03:00
static void da9052_i2c_remove(struct i2c_client *client)
{
struct da9052 *da9052 = i2c_get_clientdata(client);
da9052_device_exit(da9052);
}
static struct i2c_driver da9052_i2c_driver = {
.probe = da9052_i2c_probe,
.remove = da9052_i2c_remove,
.id_table = da9052_i2c_id,
.driver = {
.name = "da9052",
#ifdef CONFIG_OF
.of_match_table = dialog_dt_ids,
#endif
},
};
static int __init da9052_i2c_init(void)
{
int ret;
ret = i2c_add_driver(&da9052_i2c_driver);
if (ret != 0) {
pr_err("DA9052 I2C registration failed %d\n", ret);
return ret;
}
return 0;
}
subsys_initcall(da9052_i2c_init);
static void __exit da9052_i2c_exit(void)
{
i2c_del_driver(&da9052_i2c_driver);
}
module_exit(da9052_i2c_exit);
MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
MODULE_DESCRIPTION("I2C driver for Dialog DA9052 PMIC");
MODULE_LICENSE("GPL");