WSL2-Linux-Kernel/arch/riscv/mm/context.c

325 строки
9.0 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2012 Regents of the University of California
* Copyright (C) 2017 SiFive
RISC-V: Implement ASID allocator Currently, we do local TLB flush on every MM switch. This is very harsh on performance because we are forcing page table walks after every MM switch. This patch implements ASID allocator for assigning an ASID to a MM context. The number of ASIDs are limited in HW so we create a logical entity named CONTEXTID for assigning to MM context. The lower bits of CONTEXTID are ASID and upper bits are VERSION number. The number of usable ASID bits supported by HW are detected at boot-time by writing 1s to ASID bits in SATP CSR. We allocate new CONTEXTID on first MM switch for a MM context where the ASID is allocated from an ASID bitmap and VERSION is provide by an atomic counter. At time of allocating new CONTEXTID, if we run out of available ASIDs then: 1. We flush the ASID bitmap 2. Increment current VERSION atomic counter 3. Re-allocate ASID from ASID bitmap 4. Flush TLB on all CPUs 5. Try CONTEXTID re-assignment on all CPUs Please note that we don't use ASID #0 because it is used at boot-time by all CPUs for initial MM context. Also, newly created context is always assigned CONTEXTID #0 (i.e. VERSION #0 and ASID #0) which is an invalid context in our implementation. Using above approach, we have virtually infinite CONTEXTIDs on-top-of limited number of HW ASIDs. This approach is inspired from ASID allocator used for Linux ARM/ARM64 but we have adapted it for RISC-V. Overall, this ASID allocator helps us reduce rate of local TLB flushes on every CPU thereby increasing performance. This patch is tested on QEMU virt machine, Spike and SiFive Unleashed board. On QEMU virt machine, we see some (3-5% approx) performance improvement with SW emulated TLBs provided by QEMU. Unfortunately, the ASID bits of the SATP CSR are not implemented on Spike and SiFive Unleashed board so we don't see any change in performance. On real HW having all ASID bits implemented, the performance gains will be much more due improved sharing of TLB among different processes. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-03 12:49:07 +03:00
* Copyright (C) 2021 Western Digital Corporation or its affiliates.
*/
RISC-V: Implement ASID allocator Currently, we do local TLB flush on every MM switch. This is very harsh on performance because we are forcing page table walks after every MM switch. This patch implements ASID allocator for assigning an ASID to a MM context. The number of ASIDs are limited in HW so we create a logical entity named CONTEXTID for assigning to MM context. The lower bits of CONTEXTID are ASID and upper bits are VERSION number. The number of usable ASID bits supported by HW are detected at boot-time by writing 1s to ASID bits in SATP CSR. We allocate new CONTEXTID on first MM switch for a MM context where the ASID is allocated from an ASID bitmap and VERSION is provide by an atomic counter. At time of allocating new CONTEXTID, if we run out of available ASIDs then: 1. We flush the ASID bitmap 2. Increment current VERSION atomic counter 3. Re-allocate ASID from ASID bitmap 4. Flush TLB on all CPUs 5. Try CONTEXTID re-assignment on all CPUs Please note that we don't use ASID #0 because it is used at boot-time by all CPUs for initial MM context. Also, newly created context is always assigned CONTEXTID #0 (i.e. VERSION #0 and ASID #0) which is an invalid context in our implementation. Using above approach, we have virtually infinite CONTEXTIDs on-top-of limited number of HW ASIDs. This approach is inspired from ASID allocator used for Linux ARM/ARM64 but we have adapted it for RISC-V. Overall, this ASID allocator helps us reduce rate of local TLB flushes on every CPU thereby increasing performance. This patch is tested on QEMU virt machine, Spike and SiFive Unleashed board. On QEMU virt machine, we see some (3-5% approx) performance improvement with SW emulated TLBs provided by QEMU. Unfortunately, the ASID bits of the SATP CSR are not implemented on Spike and SiFive Unleashed board so we don't see any change in performance. On real HW having all ASID bits implemented, the performance gains will be much more due improved sharing of TLB among different processes. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-03 12:49:07 +03:00
#include <linux/bitops.h>
#include <linux/cpumask.h>
#include <linux/mm.h>
RISC-V: Implement ASID allocator Currently, we do local TLB flush on every MM switch. This is very harsh on performance because we are forcing page table walks after every MM switch. This patch implements ASID allocator for assigning an ASID to a MM context. The number of ASIDs are limited in HW so we create a logical entity named CONTEXTID for assigning to MM context. The lower bits of CONTEXTID are ASID and upper bits are VERSION number. The number of usable ASID bits supported by HW are detected at boot-time by writing 1s to ASID bits in SATP CSR. We allocate new CONTEXTID on first MM switch for a MM context where the ASID is allocated from an ASID bitmap and VERSION is provide by an atomic counter. At time of allocating new CONTEXTID, if we run out of available ASIDs then: 1. We flush the ASID bitmap 2. Increment current VERSION atomic counter 3. Re-allocate ASID from ASID bitmap 4. Flush TLB on all CPUs 5. Try CONTEXTID re-assignment on all CPUs Please note that we don't use ASID #0 because it is used at boot-time by all CPUs for initial MM context. Also, newly created context is always assigned CONTEXTID #0 (i.e. VERSION #0 and ASID #0) which is an invalid context in our implementation. Using above approach, we have virtually infinite CONTEXTIDs on-top-of limited number of HW ASIDs. This approach is inspired from ASID allocator used for Linux ARM/ARM64 but we have adapted it for RISC-V. Overall, this ASID allocator helps us reduce rate of local TLB flushes on every CPU thereby increasing performance. This patch is tested on QEMU virt machine, Spike and SiFive Unleashed board. On QEMU virt machine, we see some (3-5% approx) performance improvement with SW emulated TLBs provided by QEMU. Unfortunately, the ASID bits of the SATP CSR are not implemented on Spike and SiFive Unleashed board so we don't see any change in performance. On real HW having all ASID bits implemented, the performance gains will be much more due improved sharing of TLB among different processes. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-03 12:49:07 +03:00
#include <linux/percpu.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/static_key.h>
#include <asm/tlbflush.h>
#include <asm/cacheflush.h>
#include <asm/mmu_context.h>
RISC-V: Implement ASID allocator Currently, we do local TLB flush on every MM switch. This is very harsh on performance because we are forcing page table walks after every MM switch. This patch implements ASID allocator for assigning an ASID to a MM context. The number of ASIDs are limited in HW so we create a logical entity named CONTEXTID for assigning to MM context. The lower bits of CONTEXTID are ASID and upper bits are VERSION number. The number of usable ASID bits supported by HW are detected at boot-time by writing 1s to ASID bits in SATP CSR. We allocate new CONTEXTID on first MM switch for a MM context where the ASID is allocated from an ASID bitmap and VERSION is provide by an atomic counter. At time of allocating new CONTEXTID, if we run out of available ASIDs then: 1. We flush the ASID bitmap 2. Increment current VERSION atomic counter 3. Re-allocate ASID from ASID bitmap 4. Flush TLB on all CPUs 5. Try CONTEXTID re-assignment on all CPUs Please note that we don't use ASID #0 because it is used at boot-time by all CPUs for initial MM context. Also, newly created context is always assigned CONTEXTID #0 (i.e. VERSION #0 and ASID #0) which is an invalid context in our implementation. Using above approach, we have virtually infinite CONTEXTIDs on-top-of limited number of HW ASIDs. This approach is inspired from ASID allocator used for Linux ARM/ARM64 but we have adapted it for RISC-V. Overall, this ASID allocator helps us reduce rate of local TLB flushes on every CPU thereby increasing performance. This patch is tested on QEMU virt machine, Spike and SiFive Unleashed board. On QEMU virt machine, we see some (3-5% approx) performance improvement with SW emulated TLBs provided by QEMU. Unfortunately, the ASID bits of the SATP CSR are not implemented on Spike and SiFive Unleashed board so we don't see any change in performance. On real HW having all ASID bits implemented, the performance gains will be much more due improved sharing of TLB among different processes. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-03 12:49:07 +03:00
#ifdef CONFIG_MMU
static DEFINE_STATIC_KEY_FALSE(use_asid_allocator);
static unsigned long asid_bits;
static unsigned long num_asids;
static unsigned long asid_mask;
static atomic_long_t current_version;
static DEFINE_RAW_SPINLOCK(context_lock);
static cpumask_t context_tlb_flush_pending;
static unsigned long *context_asid_map;
static DEFINE_PER_CPU(atomic_long_t, active_context);
static DEFINE_PER_CPU(unsigned long, reserved_context);
static bool check_update_reserved_context(unsigned long cntx,
unsigned long newcntx)
{
int cpu;
bool hit = false;
/*
* Iterate over the set of reserved CONTEXT looking for a match.
* If we find one, then we can update our mm to use new CONTEXT
* (i.e. the same CONTEXT in the current_version) but we can't
* exit the loop early, since we need to ensure that all copies
* of the old CONTEXT are updated to reflect the mm. Failure to do
* so could result in us missing the reserved CONTEXT in a future
* version.
*/
for_each_possible_cpu(cpu) {
if (per_cpu(reserved_context, cpu) == cntx) {
hit = true;
per_cpu(reserved_context, cpu) = newcntx;
}
}
return hit;
}
static void __flush_context(void)
{
int i;
unsigned long cntx;
/* Must be called with context_lock held */
lockdep_assert_held(&context_lock);
/* Update the list of reserved ASIDs and the ASID bitmap. */
bitmap_clear(context_asid_map, 0, num_asids);
/* Mark already active ASIDs as used */
for_each_possible_cpu(i) {
cntx = atomic_long_xchg_relaxed(&per_cpu(active_context, i), 0);
/*
* If this CPU has already been through a rollover, but
* hasn't run another task in the meantime, we must preserve
* its reserved CONTEXT, as this is the only trace we have of
* the process it is still running.
*/
if (cntx == 0)
cntx = per_cpu(reserved_context, i);
__set_bit(cntx & asid_mask, context_asid_map);
per_cpu(reserved_context, i) = cntx;
}
/* Mark ASID #0 as used because it is used at boot-time */
__set_bit(0, context_asid_map);
/* Queue a TLB invalidation for each CPU on next context-switch */
cpumask_setall(&context_tlb_flush_pending);
}
static unsigned long __new_context(struct mm_struct *mm)
{
static u32 cur_idx = 1;
unsigned long cntx = atomic_long_read(&mm->context.id);
unsigned long asid, ver = atomic_long_read(&current_version);
/* Must be called with context_lock held */
lockdep_assert_held(&context_lock);
if (cntx != 0) {
unsigned long newcntx = ver | (cntx & asid_mask);
/*
* If our current CONTEXT was active during a rollover, we
* can continue to use it and this was just a false alarm.
*/
if (check_update_reserved_context(cntx, newcntx))
return newcntx;
/*
* We had a valid CONTEXT in a previous life, so try to
* re-use it if possible.
*/
if (!__test_and_set_bit(cntx & asid_mask, context_asid_map))
return newcntx;
}
/*
* Allocate a free ASID. If we can't find one then increment
* current_version and flush all ASIDs.
*/
asid = find_next_zero_bit(context_asid_map, num_asids, cur_idx);
if (asid != num_asids)
goto set_asid;
/* We're out of ASIDs, so increment current_version */
ver = atomic_long_add_return_relaxed(num_asids, &current_version);
/* Flush everything */
__flush_context();
/* We have more ASIDs than CPUs, so this will always succeed */
asid = find_next_zero_bit(context_asid_map, num_asids, 1);
set_asid:
__set_bit(asid, context_asid_map);
cur_idx = asid;
return asid | ver;
}
static void set_mm_asid(struct mm_struct *mm, unsigned int cpu)
{
unsigned long flags;
bool need_flush_tlb = false;
unsigned long cntx, old_active_cntx;
cntx = atomic_long_read(&mm->context.id);
/*
* If our active_context is non-zero and the context matches the
* current_version, then we update the active_context entry with a
* relaxed cmpxchg.
*
* Following is how we handle racing with a concurrent rollover:
*
* - We get a zero back from the cmpxchg and end up waiting on the
* lock. Taking the lock synchronises with the rollover and so
* we are forced to see the updated verion.
*
* - We get a valid context back from the cmpxchg then we continue
* using old ASID because __flush_context() would have marked ASID
* of active_context as used and next context switch we will
* allocate new context.
*/
old_active_cntx = atomic_long_read(&per_cpu(active_context, cpu));
if (old_active_cntx &&
((cntx & ~asid_mask) == atomic_long_read(&current_version)) &&
atomic_long_cmpxchg_relaxed(&per_cpu(active_context, cpu),
old_active_cntx, cntx))
goto switch_mm_fast;
raw_spin_lock_irqsave(&context_lock, flags);
/* Check that our ASID belongs to the current_version. */
cntx = atomic_long_read(&mm->context.id);
if ((cntx & ~asid_mask) != atomic_long_read(&current_version)) {
cntx = __new_context(mm);
atomic_long_set(&mm->context.id, cntx);
}
if (cpumask_test_and_clear_cpu(cpu, &context_tlb_flush_pending))
need_flush_tlb = true;
atomic_long_set(&per_cpu(active_context, cpu), cntx);
raw_spin_unlock_irqrestore(&context_lock, flags);
switch_mm_fast:
csr_write(CSR_SATP, virt_to_pfn(mm->pgd) |
((cntx & asid_mask) << SATP_ASID_SHIFT) |
SATP_MODE);
if (need_flush_tlb)
local_flush_tlb_all();
}
static void set_mm_noasid(struct mm_struct *mm)
{
/* Switch the page table and blindly nuke entire local TLB */
csr_write(CSR_SATP, virt_to_pfn(mm->pgd) | SATP_MODE);
local_flush_tlb_all();
}
static inline void set_mm(struct mm_struct *mm, unsigned int cpu)
{
if (static_branch_unlikely(&use_asid_allocator))
set_mm_asid(mm, cpu);
else
set_mm_noasid(mm);
}
static int asids_init(void)
{
unsigned long old;
/* Figure-out number of ASID bits in HW */
old = csr_read(CSR_SATP);
asid_bits = old | (SATP_ASID_MASK << SATP_ASID_SHIFT);
csr_write(CSR_SATP, asid_bits);
asid_bits = (csr_read(CSR_SATP) >> SATP_ASID_SHIFT) & SATP_ASID_MASK;
asid_bits = fls_long(asid_bits);
csr_write(CSR_SATP, old);
/*
* In the process of determining number of ASID bits (above)
* we polluted the TLB of current HART so let's do TLB flushed
* to remove unwanted TLB enteries.
*/
local_flush_tlb_all();
/* Pre-compute ASID details */
num_asids = 1 << asid_bits;
asid_mask = num_asids - 1;
/*
* Use ASID allocator only if number of HW ASIDs are
* at-least twice more than CPUs
*/
if (num_asids > (2 * num_possible_cpus())) {
atomic_long_set(&current_version, num_asids);
context_asid_map = kcalloc(BITS_TO_LONGS(num_asids),
sizeof(*context_asid_map), GFP_KERNEL);
if (!context_asid_map)
panic("Failed to allocate bitmap for %lu ASIDs\n",
num_asids);
__set_bit(0, context_asid_map);
static_branch_enable(&use_asid_allocator);
pr_info("ASID allocator using %lu bits (%lu entries)\n",
asid_bits, num_asids);
} else {
pr_info("ASID allocator disabled\n");
}
return 0;
}
early_initcall(asids_init);
#else
static inline void set_mm(struct mm_struct *mm, unsigned int cpu)
{
/* Nothing to do here when there is no MMU */
}
#endif
/*
* When necessary, performs a deferred icache flush for the given MM context,
* on the local CPU. RISC-V has no direct mechanism for instruction cache
* shoot downs, so instead we send an IPI that informs the remote harts they
* need to flush their local instruction caches. To avoid pathologically slow
* behavior in a common case (a bunch of single-hart processes on a many-hart
* machine, ie 'make -j') we avoid the IPIs for harts that are not currently
* executing a MM context and instead schedule a deferred local instruction
* cache flush to be performed before execution resumes on each hart. This
* actually performs that local instruction cache flush, which implicitly only
* refers to the current hart.
*/
static inline void flush_icache_deferred(struct mm_struct *mm)
{
#ifdef CONFIG_SMP
unsigned int cpu = smp_processor_id();
cpumask_t *mask = &mm->context.icache_stale_mask;
if (cpumask_test_cpu(cpu, mask)) {
cpumask_clear_cpu(cpu, mask);
/*
* Ensure the remote hart's writes are visible to this hart.
* This pairs with a barrier in flush_icache_mm.
*/
smp_mb();
local_flush_icache_all();
}
#endif
}
void switch_mm(struct mm_struct *prev, struct mm_struct *next,
struct task_struct *task)
{
unsigned int cpu;
if (unlikely(prev == next))
return;
/*
* Mark the current MM context as inactive, and the next as
* active. This is at least used by the icache flushing
* routines in order to determine who should be flushed.
*/
cpu = smp_processor_id();
cpumask_clear_cpu(cpu, mm_cpumask(prev));
cpumask_set_cpu(cpu, mm_cpumask(next));
RISC-V: Implement ASID allocator Currently, we do local TLB flush on every MM switch. This is very harsh on performance because we are forcing page table walks after every MM switch. This patch implements ASID allocator for assigning an ASID to a MM context. The number of ASIDs are limited in HW so we create a logical entity named CONTEXTID for assigning to MM context. The lower bits of CONTEXTID are ASID and upper bits are VERSION number. The number of usable ASID bits supported by HW are detected at boot-time by writing 1s to ASID bits in SATP CSR. We allocate new CONTEXTID on first MM switch for a MM context where the ASID is allocated from an ASID bitmap and VERSION is provide by an atomic counter. At time of allocating new CONTEXTID, if we run out of available ASIDs then: 1. We flush the ASID bitmap 2. Increment current VERSION atomic counter 3. Re-allocate ASID from ASID bitmap 4. Flush TLB on all CPUs 5. Try CONTEXTID re-assignment on all CPUs Please note that we don't use ASID #0 because it is used at boot-time by all CPUs for initial MM context. Also, newly created context is always assigned CONTEXTID #0 (i.e. VERSION #0 and ASID #0) which is an invalid context in our implementation. Using above approach, we have virtually infinite CONTEXTIDs on-top-of limited number of HW ASIDs. This approach is inspired from ASID allocator used for Linux ARM/ARM64 but we have adapted it for RISC-V. Overall, this ASID allocator helps us reduce rate of local TLB flushes on every CPU thereby increasing performance. This patch is tested on QEMU virt machine, Spike and SiFive Unleashed board. On QEMU virt machine, we see some (3-5% approx) performance improvement with SW emulated TLBs provided by QEMU. Unfortunately, the ASID bits of the SATP CSR are not implemented on Spike and SiFive Unleashed board so we don't see any change in performance. On real HW having all ASID bits implemented, the performance gains will be much more due improved sharing of TLB among different processes. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-02-03 12:49:07 +03:00
set_mm(next, cpu);
flush_icache_deferred(next);
}