License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-01 17:07:57 +03:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
2008-02-19 23:02:16 +03:00
|
|
|
/* System call table for x86-64. */
|
2005-04-17 02:20:36 +04:00
|
|
|
|
|
|
|
|
#include <linux/linkage.h>
|
|
|
|
|
#include <linux/sys.h>
|
|
|
|
|
#include <linux/cache.h>
|
2007-05-02 21:27:18 +04:00
|
|
|
#include <asm/asm-offsets.h>
|
2013-08-06 02:02:35 +04:00
|
|
|
#include <asm/syscall.h>
|
2005-04-17 02:20:36 +04:00
|
|
|
|
syscalls/x86: Use 'struct pt_regs' based syscall calling convention for 64-bit syscalls
Let's make use of ARCH_HAS_SYSCALL_WRAPPER=y on pure 64-bit x86-64 systems:
Each syscall defines a stub which takes struct pt_regs as its only
argument. It decodes just those parameters it needs, e.g:
asmlinkage long sys_xyzzy(const struct pt_regs *regs)
{
return SyS_xyzzy(regs->di, regs->si, regs->dx);
}
This approach avoids leaking random user-provided register content down
the call chain.
For example, for sys_recv() which is a 4-parameter syscall, the assembly
now is (in slightly reordered fashion):
<sys_recv>:
callq <__fentry__>
/* decode regs->di, ->si, ->dx and ->r10 */
mov 0x70(%rdi),%rdi
mov 0x68(%rdi),%rsi
mov 0x60(%rdi),%rdx
mov 0x38(%rdi),%rcx
[ SyS_recv() is automatically inlined by the compiler,
as it is not [yet] used anywhere else ]
/* clear %r9 and %r8, the 5th and 6th args */
xor %r9d,%r9d
xor %r8d,%r8d
/* do the actual work */
callq __sys_recvfrom
/* cleanup and return */
cltq
retq
The only valid place in an x86-64 kernel which rightfully calls
a syscall function on its own -- vsyscall -- needs to be modified
to pass struct pt_regs onwards as well.
To keep the syscall table generation working independent of
SYSCALL_PTREGS being enabled, the stubs are named the same as the
"original" syscall stubs, i.e. sys_*().
This patch is based on an original proof-of-concept
| From: Linus Torvalds <torvalds@linux-foundation.org>
| Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
and was split up and heavily modified by me, in particular to base it on
ARCH_HAS_SYSCALL_WRAPPER, to limit it to 64-bit-only for the time being,
and to update the vsyscall to the new calling convention.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180405095307.3730-4-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2018-04-05 12:53:02 +03:00
|
|
|
/* this is a lie, but it does not hurt as sys_ni_syscall just returns -EINVAL */
|
|
|
|
|
extern asmlinkage long sys_ni_syscall(const struct pt_regs *);
|
|
|
|
|
#define __SYSCALL_64(nr, sym, qual) extern asmlinkage long sym(const struct pt_regs *);
|
2011-11-12 04:07:41 +04:00
|
|
|
#include <asm/syscalls_64.h>
|
|
|
|
|
#undef __SYSCALL_64
|
2005-04-17 02:20:36 +04:00
|
|
|
|
2018-01-28 21:38:49 +03:00
|
|
|
#define __SYSCALL_64(nr, sym, qual) [nr] = sym,
|
2005-04-17 02:20:36 +04:00
|
|
|
|
2013-08-06 02:02:44 +04:00
|
|
|
asmlinkage const sys_call_ptr_t sys_call_table[__NR_syscall_max+1] = {
|
2008-02-19 23:02:16 +03:00
|
|
|
/*
|
2011-11-12 03:43:02 +04:00
|
|
|
* Smells like a compiler bug -- it doesn't work
|
|
|
|
|
* when the & below is removed.
|
|
|
|
|
*/
|
2005-04-17 02:20:36 +04:00
|
|
|
[0 ... __NR_syscall_max] = &sys_ni_syscall,
|
2011-11-12 04:07:41 +04:00
|
|
|
#include <asm/syscalls_64.h>
|
2005-04-17 02:20:36 +04:00
|
|
|
};
|
