WSL2-Linux-Kernel/net/wireless/sme.c

1052 строки
27 KiB
C
Исходник Обычный вид История

/*
* SME code for cfg80211
* both driver SME event handling and the SME implementation
* (for nl80211's connect() and wext)
*
* Copyright 2009 Johannes Berg <johannes@sipsolutions.net>
* Copyright (C) 2009 Intel Corporation. All rights reserved.
*/
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-24 11:04:11 +03:00
#include <linux/slab.h>
#include <linux/workqueue.h>
#include <linux/wireless.h>
#include <linux/export.h>
#include <net/iw_handler.h>
#include <net/cfg80211.h>
#include <net/rtnetlink.h>
#include "nl80211.h"
#include "reg.h"
#include "rdev-ops.h"
/*
* Software SME in cfg80211, using auth/assoc/deauth calls to the
* driver. This is is for implementing nl80211's connect/disconnect
* and wireless extensions (if configured.)
*/
struct cfg80211_conn {
struct cfg80211_connect_params params;
/* these are sub-states of the _CONNECTING sme_state */
enum {
CFG80211_CONN_SCANNING,
CFG80211_CONN_SCAN_AGAIN,
CFG80211_CONN_AUTHENTICATE_NEXT,
CFG80211_CONN_AUTHENTICATING,
CFG80211_CONN_AUTH_FAILED,
CFG80211_CONN_ASSOCIATE_NEXT,
CFG80211_CONN_ASSOCIATING,
CFG80211_CONN_ASSOC_FAILED,
CFG80211_CONN_DEAUTH,
CFG80211_CONN_CONNECTED,
} state;
u8 bssid[ETH_ALEN], prev_bssid[ETH_ALEN];
const u8 *ie;
size_t ie_len;
bool auto_auth, prev_bssid_valid;
};
static void cfg80211_sme_free(struct wireless_dev *wdev)
{
if (!wdev->conn)
return;
kfree(wdev->conn->ie);
kfree(wdev->conn);
wdev->conn = NULL;
}
static int cfg80211_conn_scan(struct wireless_dev *wdev)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
struct cfg80211_scan_request *request;
int n_channels, err;
ASSERT_RTNL();
ASSERT_WDEV_LOCK(wdev);
if (rdev->scan_req || rdev->scan_msg)
return -EBUSY;
if (wdev->conn->params.channel)
n_channels = 1;
else
n_channels = ieee80211_get_num_supported_channels(wdev->wiphy);
request = kzalloc(sizeof(*request) + sizeof(request->ssids[0]) +
sizeof(request->channels[0]) * n_channels,
GFP_KERNEL);
if (!request)
return -ENOMEM;
if (wdev->conn->params.channel) {
enum ieee80211_band band = wdev->conn->params.channel->band;
struct ieee80211_supported_band *sband =
wdev->wiphy->bands[band];
if (!sband) {
kfree(request);
return -EINVAL;
}
request->channels[0] = wdev->conn->params.channel;
request->rates[band] = (1 << sband->n_bitrates) - 1;
} else {
int i = 0, j;
enum ieee80211_band band;
struct ieee80211_supported_band *bands;
struct ieee80211_channel *channel;
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
bands = wdev->wiphy->bands[band];
if (!bands)
continue;
for (j = 0; j < bands->n_channels; j++) {
channel = &bands->channels[j];
if (channel->flags & IEEE80211_CHAN_DISABLED)
continue;
request->channels[i++] = channel;
}
request->rates[band] = (1 << bands->n_bitrates) - 1;
}
n_channels = i;
}
request->n_channels = n_channels;
request->ssids = (void *)&request->channels[n_channels];
request->n_ssids = 1;
memcpy(request->ssids[0].ssid, wdev->conn->params.ssid,
wdev->conn->params.ssid_len);
request->ssids[0].ssid_len = wdev->conn->params.ssid_len;
request->wdev = wdev;
request->wiphy = &rdev->wiphy;
request->scan_start = jiffies;
rdev->scan_req = request;
err = rdev_scan(rdev, request);
if (!err) {
wdev->conn->state = CFG80211_CONN_SCANNING;
nl80211_send_scan_start(rdev, wdev);
dev_hold(wdev->netdev);
} else {
rdev->scan_req = NULL;
kfree(request);
}
return err;
}
static int cfg80211_conn_do_work(struct wireless_dev *wdev)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
struct cfg80211_connect_params *params;
struct cfg80211_assoc_request req = {};
int err;
ASSERT_WDEV_LOCK(wdev);
if (!wdev->conn)
return 0;
params = &wdev->conn->params;
switch (wdev->conn->state) {
case CFG80211_CONN_SCANNING:
/* didn't find it during scan ... */
return -ENOENT;
case CFG80211_CONN_SCAN_AGAIN:
return cfg80211_conn_scan(wdev);
case CFG80211_CONN_AUTHENTICATE_NEXT:
if (WARN_ON(!rdev->ops->auth))
return -EOPNOTSUPP;
wdev->conn->state = CFG80211_CONN_AUTHENTICATING;
return cfg80211_mlme_auth(rdev, wdev->netdev,
params->channel, params->auth_type,
params->bssid,
params->ssid, params->ssid_len,
NULL, 0,
params->key, params->key_len,
params->key_idx, NULL, 0);
case CFG80211_CONN_AUTH_FAILED:
return -ENOTCONN;
case CFG80211_CONN_ASSOCIATE_NEXT:
if (WARN_ON(!rdev->ops->assoc))
return -EOPNOTSUPP;
wdev->conn->state = CFG80211_CONN_ASSOCIATING;
if (wdev->conn->prev_bssid_valid)
req.prev_bssid = wdev->conn->prev_bssid;
req.ie = params->ie;
req.ie_len = params->ie_len;
req.use_mfp = params->mfp != NL80211_MFP_NO;
req.crypto = params->crypto;
req.flags = params->flags;
req.ht_capa = params->ht_capa;
req.ht_capa_mask = params->ht_capa_mask;
req.vht_capa = params->vht_capa;
req.vht_capa_mask = params->vht_capa_mask;
err = cfg80211_mlme_assoc(rdev, wdev->netdev, params->channel,
params->bssid, params->ssid,
params->ssid_len, &req);
if (err)
cfg80211_mlme_deauth(rdev, wdev->netdev, params->bssid,
NULL, 0,
WLAN_REASON_DEAUTH_LEAVING,
false);
return err;
case CFG80211_CONN_ASSOC_FAILED:
cfg80211_mlme_deauth(rdev, wdev->netdev, params->bssid,
NULL, 0,
WLAN_REASON_DEAUTH_LEAVING, false);
return -ENOTCONN;
case CFG80211_CONN_DEAUTH:
cfg80211_mlme_deauth(rdev, wdev->netdev, params->bssid,
NULL, 0,
WLAN_REASON_DEAUTH_LEAVING, false);
/* free directly, disconnected event already sent */
cfg80211_sme_free(wdev);
return 0;
default:
return 0;
}
}
void cfg80211_conn_work(struct work_struct *work)
{
struct cfg80211_registered_device *rdev =
container_of(work, struct cfg80211_registered_device, conn_work);
struct wireless_dev *wdev;
u8 bssid_buf[ETH_ALEN], *bssid = NULL;
rtnl_lock();
list_for_each_entry(wdev, &rdev->wdev_list, list) {
if (!wdev->netdev)
continue;
wdev_lock(wdev);
if (!netif_running(wdev->netdev)) {
wdev_unlock(wdev);
continue;
}
if (!wdev->conn ||
wdev->conn->state == CFG80211_CONN_CONNECTED) {
wdev_unlock(wdev);
continue;
}
if (wdev->conn->params.bssid) {
memcpy(bssid_buf, wdev->conn->params.bssid, ETH_ALEN);
bssid = bssid_buf;
}
if (cfg80211_conn_do_work(wdev)) {
__cfg80211_connect_result(
wdev->netdev, bssid,
NULL, 0, NULL, 0,
WLAN_STATUS_UNSPECIFIED_FAILURE,
false, NULL);
}
wdev_unlock(wdev);
}
rtnl_unlock();
}
/* Returned bss is reference counted and must be cleaned up appropriately. */
static struct cfg80211_bss *cfg80211_get_conn_bss(struct wireless_dev *wdev)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
struct cfg80211_bss *bss;
ASSERT_WDEV_LOCK(wdev);
bss = cfg80211_get_bss(wdev->wiphy, wdev->conn->params.channel,
wdev->conn->params.bssid,
wdev->conn->params.ssid,
wdev->conn->params.ssid_len,
IEEE80211_BSS_TYPE_ESS,
IEEE80211_PRIVACY(wdev->conn->params.privacy));
if (!bss)
return NULL;
memcpy(wdev->conn->bssid, bss->bssid, ETH_ALEN);
wdev->conn->params.bssid = wdev->conn->bssid;
wdev->conn->params.channel = bss->channel;
wdev->conn->state = CFG80211_CONN_AUTHENTICATE_NEXT;
schedule_work(&rdev->conn_work);
return bss;
}
static void __cfg80211_sme_scan_done(struct net_device *dev)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
struct cfg80211_bss *bss;
ASSERT_WDEV_LOCK(wdev);
if (!wdev->conn)
return;
if (wdev->conn->state != CFG80211_CONN_SCANNING &&
wdev->conn->state != CFG80211_CONN_SCAN_AGAIN)
return;
bss = cfg80211_get_conn_bss(wdev);
if (bss)
cfg80211_put_bss(&rdev->wiphy, bss);
else
schedule_work(&rdev->conn_work);
}
void cfg80211_sme_scan_done(struct net_device *dev)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
wdev_lock(wdev);
__cfg80211_sme_scan_done(dev);
wdev_unlock(wdev);
}
void cfg80211_sme_rx_auth(struct wireless_dev *wdev, const u8 *buf, size_t len)
{
struct wiphy *wiphy = wdev->wiphy;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wiphy);
struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)buf;
u16 status_code = le16_to_cpu(mgmt->u.auth.status_code);
ASSERT_WDEV_LOCK(wdev);
if (!wdev->conn || wdev->conn->state == CFG80211_CONN_CONNECTED)
return;
if (status_code == WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG &&
wdev->conn->auto_auth &&
wdev->conn->params.auth_type != NL80211_AUTHTYPE_NETWORK_EAP) {
/* select automatically between only open, shared, leap */
switch (wdev->conn->params.auth_type) {
case NL80211_AUTHTYPE_OPEN_SYSTEM:
if (wdev->connect_keys)
wdev->conn->params.auth_type =
NL80211_AUTHTYPE_SHARED_KEY;
else
wdev->conn->params.auth_type =
NL80211_AUTHTYPE_NETWORK_EAP;
break;
case NL80211_AUTHTYPE_SHARED_KEY:
wdev->conn->params.auth_type =
NL80211_AUTHTYPE_NETWORK_EAP;
break;
default:
/* huh? */
wdev->conn->params.auth_type =
NL80211_AUTHTYPE_OPEN_SYSTEM;
break;
}
wdev->conn->state = CFG80211_CONN_AUTHENTICATE_NEXT;
schedule_work(&rdev->conn_work);
} else if (status_code != WLAN_STATUS_SUCCESS) {
__cfg80211_connect_result(wdev->netdev, mgmt->bssid,
NULL, 0, NULL, 0,
status_code, false, NULL);
} else if (wdev->conn->state == CFG80211_CONN_AUTHENTICATING) {
wdev->conn->state = CFG80211_CONN_ASSOCIATE_NEXT;
schedule_work(&rdev->conn_work);
}
}
bool cfg80211_sme_rx_assoc_resp(struct wireless_dev *wdev, u16 status)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
if (!wdev->conn)
return false;
if (status == WLAN_STATUS_SUCCESS) {
wdev->conn->state = CFG80211_CONN_CONNECTED;
return false;
}
if (wdev->conn->prev_bssid_valid) {
/*
* Some stupid APs don't accept reassoc, so we
* need to fall back to trying regular assoc;
* return true so no event is sent to userspace.
*/
wdev->conn->prev_bssid_valid = false;
wdev->conn->state = CFG80211_CONN_ASSOCIATE_NEXT;
schedule_work(&rdev->conn_work);
return true;
}
wdev->conn->state = CFG80211_CONN_ASSOC_FAILED;
schedule_work(&rdev->conn_work);
return false;
}
void cfg80211_sme_deauth(struct wireless_dev *wdev)
{
cfg80211_sme_free(wdev);
}
void cfg80211_sme_auth_timeout(struct wireless_dev *wdev)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
if (!wdev->conn)
return;
wdev->conn->state = CFG80211_CONN_AUTH_FAILED;
schedule_work(&rdev->conn_work);
}
void cfg80211_sme_disassoc(struct wireless_dev *wdev)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
if (!wdev->conn)
return;
wdev->conn->state = CFG80211_CONN_DEAUTH;
schedule_work(&rdev->conn_work);
}
void cfg80211_sme_assoc_timeout(struct wireless_dev *wdev)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
if (!wdev->conn)
return;
wdev->conn->state = CFG80211_CONN_ASSOC_FAILED;
schedule_work(&rdev->conn_work);
}
static int cfg80211_sme_get_conn_ies(struct wireless_dev *wdev,
const u8 *ies, size_t ies_len,
const u8 **out_ies, size_t *out_ies_len)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
u8 *buf;
size_t offs;
if (!rdev->wiphy.extended_capabilities_len ||
(ies && cfg80211_find_ie(WLAN_EID_EXT_CAPABILITY, ies, ies_len))) {
*out_ies = kmemdup(ies, ies_len, GFP_KERNEL);
if (!*out_ies)
return -ENOMEM;
*out_ies_len = ies_len;
return 0;
}
buf = kmalloc(ies_len + rdev->wiphy.extended_capabilities_len + 2,
GFP_KERNEL);
if (!buf)
return -ENOMEM;
if (ies_len) {
static const u8 before_extcapa[] = {
/* not listing IEs expected to be created by driver */
WLAN_EID_RSN,
WLAN_EID_QOS_CAPA,
WLAN_EID_RRM_ENABLED_CAPABILITIES,
WLAN_EID_MOBILITY_DOMAIN,
WLAN_EID_SUPPORTED_REGULATORY_CLASSES,
WLAN_EID_BSS_COEX_2040,
};
offs = ieee80211_ie_split(ies, ies_len, before_extcapa,
ARRAY_SIZE(before_extcapa), 0);
memcpy(buf, ies, offs);
/* leave a whole for extended capabilities IE */
memcpy(buf + offs + rdev->wiphy.extended_capabilities_len + 2,
ies + offs, ies_len - offs);
} else {
offs = 0;
}
/* place extended capabilities IE (with only driver capabilities) */
buf[offs] = WLAN_EID_EXT_CAPABILITY;
buf[offs + 1] = rdev->wiphy.extended_capabilities_len;
memcpy(buf + offs + 2,
rdev->wiphy.extended_capabilities,
rdev->wiphy.extended_capabilities_len);
*out_ies = buf;
*out_ies_len = ies_len + rdev->wiphy.extended_capabilities_len + 2;
return 0;
}
static int cfg80211_sme_connect(struct wireless_dev *wdev,
struct cfg80211_connect_params *connect,
const u8 *prev_bssid)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
struct cfg80211_bss *bss;
int err;
if (!rdev->ops->auth || !rdev->ops->assoc)
return -EOPNOTSUPP;
if (wdev->current_bss)
return -EALREADY;
if (WARN_ON(wdev->conn))
return -EINPROGRESS;
wdev->conn = kzalloc(sizeof(*wdev->conn), GFP_KERNEL);
if (!wdev->conn)
return -ENOMEM;
/*
* Copy all parameters, and treat explicitly IEs, BSSID, SSID.
*/
memcpy(&wdev->conn->params, connect, sizeof(*connect));
if (connect->bssid) {
wdev->conn->params.bssid = wdev->conn->bssid;
memcpy(wdev->conn->bssid, connect->bssid, ETH_ALEN);
}
if (cfg80211_sme_get_conn_ies(wdev, connect->ie, connect->ie_len,
&wdev->conn->ie,
&wdev->conn->params.ie_len)) {
kfree(wdev->conn);
wdev->conn = NULL;
return -ENOMEM;
}
wdev->conn->params.ie = wdev->conn->ie;
if (connect->auth_type == NL80211_AUTHTYPE_AUTOMATIC) {
wdev->conn->auto_auth = true;
/* start with open system ... should mostly work */
wdev->conn->params.auth_type =
NL80211_AUTHTYPE_OPEN_SYSTEM;
} else {
wdev->conn->auto_auth = false;
}
wdev->conn->params.ssid = wdev->ssid;
wdev->conn->params.ssid_len = wdev->ssid_len;
/* see if we have the bss already */
bss = cfg80211_get_conn_bss(wdev);
if (prev_bssid) {
memcpy(wdev->conn->prev_bssid, prev_bssid, ETH_ALEN);
wdev->conn->prev_bssid_valid = true;
}
/* we're good if we have a matching bss struct */
if (bss) {
err = cfg80211_conn_do_work(wdev);
cfg80211_put_bss(wdev->wiphy, bss);
} else {
/* otherwise we'll need to scan for the AP first */
err = cfg80211_conn_scan(wdev);
/*
* If we can't scan right now, then we need to scan again
* after the current scan finished, since the parameters
* changed (unless we find a good AP anyway).
*/
if (err == -EBUSY) {
err = 0;
wdev->conn->state = CFG80211_CONN_SCAN_AGAIN;
}
}
if (err)
cfg80211_sme_free(wdev);
return err;
}
static int cfg80211_sme_disconnect(struct wireless_dev *wdev, u16 reason)
{
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
int err;
if (!wdev->conn)
return 0;
if (!rdev->ops->deauth)
return -EOPNOTSUPP;
if (wdev->conn->state == CFG80211_CONN_SCANNING ||
wdev->conn->state == CFG80211_CONN_SCAN_AGAIN) {
err = 0;
goto out;
}
/* wdev->conn->params.bssid must be set if > SCANNING */
err = cfg80211_mlme_deauth(rdev, wdev->netdev,
wdev->conn->params.bssid,
NULL, 0, reason, false);
out:
cfg80211_sme_free(wdev);
return err;
}
/*
* code shared for in-device and software SME
*/
static bool cfg80211_is_all_idle(void)
{
struct cfg80211_registered_device *rdev;
struct wireless_dev *wdev;
bool is_all_idle = true;
/*
* All devices must be idle as otherwise if you are actively
* scanning some new beacon hints could be learned and would
* count as new regulatory hints.
*/
list_for_each_entry(rdev, &cfg80211_rdev_list, list) {
list_for_each_entry(wdev, &rdev->wdev_list, list) {
wdev_lock(wdev);
if (wdev->conn || wdev->current_bss)
is_all_idle = false;
wdev_unlock(wdev);
}
}
return is_all_idle;
}
static void disconnect_work(struct work_struct *work)
{
rtnl_lock();
if (cfg80211_is_all_idle())
regulatory_hint_disconnect();
rtnl_unlock();
}
static DECLARE_WORK(cfg80211_disconnect_work, disconnect_work);
/*
* API calls for drivers implementing connect/disconnect and
* SME event handling
*/
/* This method must consume bss one way or another */
void __cfg80211_connect_result(struct net_device *dev, const u8 *bssid,
const u8 *req_ie, size_t req_ie_len,
const u8 *resp_ie, size_t resp_ie_len,
u16 status, bool wextev,
struct cfg80211_bss *bss)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
const u8 *country_ie;
#ifdef CONFIG_CFG80211_WEXT
union iwreq_data wrqu;
#endif
ASSERT_WDEV_LOCK(wdev);
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION &&
wdev->iftype != NL80211_IFTYPE_P2P_CLIENT)) {
cfg80211_put_bss(wdev->wiphy, bss);
return;
}
nl80211_send_connect_result(wiphy_to_rdev(wdev->wiphy), dev,
bssid, req_ie, req_ie_len,
resp_ie, resp_ie_len,
status, GFP_KERNEL);
#ifdef CONFIG_CFG80211_WEXT
if (wextev) {
if (req_ie && status == WLAN_STATUS_SUCCESS) {
memset(&wrqu, 0, sizeof(wrqu));
wrqu.data.length = req_ie_len;
wireless_send_event(dev, IWEVASSOCREQIE, &wrqu, req_ie);
}
if (resp_ie && status == WLAN_STATUS_SUCCESS) {
memset(&wrqu, 0, sizeof(wrqu));
wrqu.data.length = resp_ie_len;
wireless_send_event(dev, IWEVASSOCRESPIE, &wrqu, resp_ie);
}
memset(&wrqu, 0, sizeof(wrqu));
wrqu.ap_addr.sa_family = ARPHRD_ETHER;
if (bssid && status == WLAN_STATUS_SUCCESS) {
memcpy(wrqu.ap_addr.sa_data, bssid, ETH_ALEN);
memcpy(wdev->wext.prev_bssid, bssid, ETH_ALEN);
wdev->wext.prev_bssid_valid = true;
}
wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
}
#endif
cfg80211: fix WARN_ON for re-association to the expired BSS cfg80211 allows re-association in managed mode and if a user wants to re-associate to the same AP network after the time period of IEEE80211_SCAN_RESULT_EXPIRE, cfg80211 warns with the following message on receiving the connect result event. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 13984 at net/wireless/sme.c:658 __cfg80211_connect_result+0x3a6/0x3e0 [cfg80211]() Call Trace: [<ffffffff81747a41>] dump_stack+0x46/0x58 [<ffffffff81045847>] warn_slowpath_common+0x87/0xb0 [<ffffffff81045885>] warn_slowpath_null+0x15/0x20 [<ffffffffa05345f6>] __cfg80211_connect_result+0x3a6/0x3e0 [cfg80211] [<ffffffff8107168b>] ? update_rq_clock+0x2b/0x50 [<ffffffff81078c01>] ? update_curr+0x1/0x160 [<ffffffffa05133d2>] cfg80211_process_wdev_events+0xb2/0x1c0 [cfg80211] [<ffffffff81079303>] ? pick_next_task_fair+0x63/0x170 [<ffffffffa0513518>] cfg80211_process_rdev_events+0x38/0x90 [cfg80211] [<ffffffffa050f03d>] cfg80211_event_work+0x1d/0x30 [cfg80211] [<ffffffff8105f21f>] process_one_work+0x17f/0x420 [<ffffffff8105f90a>] worker_thread+0x11a/0x370 [<ffffffff8105f7f0>] ? rescuer_thread+0x2f0/0x2f0 [<ffffffff8106638b>] kthread+0xbb/0xc0 [<ffffffff810662d0>] ? kthread_create_on_node+0x120/0x120 [<ffffffff817574bc>] ret_from_fork+0x7c/0xb0 [<ffffffff810662d0>] ? kthread_create_on_node+0x120/0x120 ---[ end trace 61f3bddc9c4981f7 ]--- The reason is that, in connect result event cfg80211 unholds the BSS to which the device is associated (and was held so far). So, for the event with status successful, when cfg80211 wants to get that BSS from the device's BSS list it gets a NULL BSS because the BSS has been expired and unheld already. Fix it by reshuffling the code. Signed-off-by: Ujjal Roy <royujjal@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-04 15:57:34 +04:00
if (!bss && (status == WLAN_STATUS_SUCCESS)) {
WARN_ON_ONCE(!wiphy_to_rdev(wdev->wiphy)->ops->connect);
cfg80211: fix WARN_ON for re-association to the expired BSS cfg80211 allows re-association in managed mode and if a user wants to re-associate to the same AP network after the time period of IEEE80211_SCAN_RESULT_EXPIRE, cfg80211 warns with the following message on receiving the connect result event. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 13984 at net/wireless/sme.c:658 __cfg80211_connect_result+0x3a6/0x3e0 [cfg80211]() Call Trace: [<ffffffff81747a41>] dump_stack+0x46/0x58 [<ffffffff81045847>] warn_slowpath_common+0x87/0xb0 [<ffffffff81045885>] warn_slowpath_null+0x15/0x20 [<ffffffffa05345f6>] __cfg80211_connect_result+0x3a6/0x3e0 [cfg80211] [<ffffffff8107168b>] ? update_rq_clock+0x2b/0x50 [<ffffffff81078c01>] ? update_curr+0x1/0x160 [<ffffffffa05133d2>] cfg80211_process_wdev_events+0xb2/0x1c0 [cfg80211] [<ffffffff81079303>] ? pick_next_task_fair+0x63/0x170 [<ffffffffa0513518>] cfg80211_process_rdev_events+0x38/0x90 [cfg80211] [<ffffffffa050f03d>] cfg80211_event_work+0x1d/0x30 [cfg80211] [<ffffffff8105f21f>] process_one_work+0x17f/0x420 [<ffffffff8105f90a>] worker_thread+0x11a/0x370 [<ffffffff8105f7f0>] ? rescuer_thread+0x2f0/0x2f0 [<ffffffff8106638b>] kthread+0xbb/0xc0 [<ffffffff810662d0>] ? kthread_create_on_node+0x120/0x120 [<ffffffff817574bc>] ret_from_fork+0x7c/0xb0 [<ffffffff810662d0>] ? kthread_create_on_node+0x120/0x120 ---[ end trace 61f3bddc9c4981f7 ]--- The reason is that, in connect result event cfg80211 unholds the BSS to which the device is associated (and was held so far). So, for the event with status successful, when cfg80211 wants to get that BSS from the device's BSS list it gets a NULL BSS because the BSS has been expired and unheld already. Fix it by reshuffling the code. Signed-off-by: Ujjal Roy <royujjal@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-04 15:57:34 +04:00
bss = cfg80211_get_bss(wdev->wiphy, NULL, bssid,
wdev->ssid, wdev->ssid_len,
IEEE80211_BSS_TYPE_ESS,
IEEE80211_PRIVACY_ANY);
cfg80211: fix WARN_ON for re-association to the expired BSS cfg80211 allows re-association in managed mode and if a user wants to re-associate to the same AP network after the time period of IEEE80211_SCAN_RESULT_EXPIRE, cfg80211 warns with the following message on receiving the connect result event. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 13984 at net/wireless/sme.c:658 __cfg80211_connect_result+0x3a6/0x3e0 [cfg80211]() Call Trace: [<ffffffff81747a41>] dump_stack+0x46/0x58 [<ffffffff81045847>] warn_slowpath_common+0x87/0xb0 [<ffffffff81045885>] warn_slowpath_null+0x15/0x20 [<ffffffffa05345f6>] __cfg80211_connect_result+0x3a6/0x3e0 [cfg80211] [<ffffffff8107168b>] ? update_rq_clock+0x2b/0x50 [<ffffffff81078c01>] ? update_curr+0x1/0x160 [<ffffffffa05133d2>] cfg80211_process_wdev_events+0xb2/0x1c0 [cfg80211] [<ffffffff81079303>] ? pick_next_task_fair+0x63/0x170 [<ffffffffa0513518>] cfg80211_process_rdev_events+0x38/0x90 [cfg80211] [<ffffffffa050f03d>] cfg80211_event_work+0x1d/0x30 [cfg80211] [<ffffffff8105f21f>] process_one_work+0x17f/0x420 [<ffffffff8105f90a>] worker_thread+0x11a/0x370 [<ffffffff8105f7f0>] ? rescuer_thread+0x2f0/0x2f0 [<ffffffff8106638b>] kthread+0xbb/0xc0 [<ffffffff810662d0>] ? kthread_create_on_node+0x120/0x120 [<ffffffff817574bc>] ret_from_fork+0x7c/0xb0 [<ffffffff810662d0>] ? kthread_create_on_node+0x120/0x120 ---[ end trace 61f3bddc9c4981f7 ]--- The reason is that, in connect result event cfg80211 unholds the BSS to which the device is associated (and was held so far). So, for the event with status successful, when cfg80211 wants to get that BSS from the device's BSS list it gets a NULL BSS because the BSS has been expired and unheld already. Fix it by reshuffling the code. Signed-off-by: Ujjal Roy <royujjal@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-04 15:57:34 +04:00
if (bss)
cfg80211_hold_bss(bss_from_pub(bss));
}
if (wdev->current_bss) {
cfg80211_unhold_bss(wdev->current_bss);
cfg80211_put_bss(wdev->wiphy, &wdev->current_bss->pub);
wdev->current_bss = NULL;
}
if (status != WLAN_STATUS_SUCCESS) {
kzfree(wdev->connect_keys);
wdev->connect_keys = NULL;
wdev->ssid_len = 0;
if (bss) {
cfg80211_unhold_bss(bss_from_pub(bss));
cfg80211_put_bss(wdev->wiphy, bss);
}
cfg80211_sme_free(wdev);
return;
}
cfg80211: fix WARN_ON for re-association to the expired BSS cfg80211 allows re-association in managed mode and if a user wants to re-associate to the same AP network after the time period of IEEE80211_SCAN_RESULT_EXPIRE, cfg80211 warns with the following message on receiving the connect result event. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 13984 at net/wireless/sme.c:658 __cfg80211_connect_result+0x3a6/0x3e0 [cfg80211]() Call Trace: [<ffffffff81747a41>] dump_stack+0x46/0x58 [<ffffffff81045847>] warn_slowpath_common+0x87/0xb0 [<ffffffff81045885>] warn_slowpath_null+0x15/0x20 [<ffffffffa05345f6>] __cfg80211_connect_result+0x3a6/0x3e0 [cfg80211] [<ffffffff8107168b>] ? update_rq_clock+0x2b/0x50 [<ffffffff81078c01>] ? update_curr+0x1/0x160 [<ffffffffa05133d2>] cfg80211_process_wdev_events+0xb2/0x1c0 [cfg80211] [<ffffffff81079303>] ? pick_next_task_fair+0x63/0x170 [<ffffffffa0513518>] cfg80211_process_rdev_events+0x38/0x90 [cfg80211] [<ffffffffa050f03d>] cfg80211_event_work+0x1d/0x30 [cfg80211] [<ffffffff8105f21f>] process_one_work+0x17f/0x420 [<ffffffff8105f90a>] worker_thread+0x11a/0x370 [<ffffffff8105f7f0>] ? rescuer_thread+0x2f0/0x2f0 [<ffffffff8106638b>] kthread+0xbb/0xc0 [<ffffffff810662d0>] ? kthread_create_on_node+0x120/0x120 [<ffffffff817574bc>] ret_from_fork+0x7c/0xb0 [<ffffffff810662d0>] ? kthread_create_on_node+0x120/0x120 ---[ end trace 61f3bddc9c4981f7 ]--- The reason is that, in connect result event cfg80211 unholds the BSS to which the device is associated (and was held so far). So, for the event with status successful, when cfg80211 wants to get that BSS from the device's BSS list it gets a NULL BSS because the BSS has been expired and unheld already. Fix it by reshuffling the code. Signed-off-by: Ujjal Roy <royujjal@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-12-04 15:57:34 +04:00
if (WARN_ON(!bss))
return;
wdev->current_bss = bss_from_pub(bss);
cfg80211_upload_connect_keys(wdev);
rcu_read_lock();
country_ie = ieee80211_bss_get_ie(bss, WLAN_EID_COUNTRY);
if (!country_ie) {
rcu_read_unlock();
return;
}
country_ie = kmemdup(country_ie, 2 + country_ie[1], GFP_ATOMIC);
rcu_read_unlock();
if (!country_ie)
return;
/*
* ieee80211_bss_get_ie() ensures we can access:
* - country_ie + 2, the start of the country ie data, and
* - and country_ie[1] which is the IE length
*/
regulatory_hint_country_ie(wdev->wiphy, bss->channel->band,
country_ie + 2, country_ie[1]);
kfree(country_ie);
}
void cfg80211_connect_result(struct net_device *dev, const u8 *bssid,
const u8 *req_ie, size_t req_ie_len,
const u8 *resp_ie, size_t resp_ie_len,
u16 status, gfp_t gfp)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
struct cfg80211_event *ev;
unsigned long flags;
ev = kzalloc(sizeof(*ev) + req_ie_len + resp_ie_len, gfp);
if (!ev)
return;
ev->type = EVENT_CONNECT_RESULT;
if (bssid)
memcpy(ev->cr.bssid, bssid, ETH_ALEN);
if (req_ie_len) {
ev->cr.req_ie = ((u8 *)ev) + sizeof(*ev);
ev->cr.req_ie_len = req_ie_len;
memcpy((void *)ev->cr.req_ie, req_ie, req_ie_len);
}
if (resp_ie_len) {
ev->cr.resp_ie = ((u8 *)ev) + sizeof(*ev) + req_ie_len;
ev->cr.resp_ie_len = resp_ie_len;
memcpy((void *)ev->cr.resp_ie, resp_ie, resp_ie_len);
}
ev->cr.status = status;
spin_lock_irqsave(&wdev->event_lock, flags);
list_add_tail(&ev->list, &wdev->event_list);
spin_unlock_irqrestore(&wdev->event_lock, flags);
queue_work(cfg80211_wq, &rdev->event_work);
}
EXPORT_SYMBOL(cfg80211_connect_result);
/* Consumes bss object one way or another */
void __cfg80211_roamed(struct wireless_dev *wdev,
cfg80211: Fix race in bss timeout It is quite possible to run into a race in bss timeout where the drivers see the bss entry just before notifying cfg80211 of a roaming event but it got timed out by the time rdev->event_work got scehduled from cfg80211_wq. This would result in the following WARN-ON() along with the failure to notify the user space of the roaming. The other situation which is happening with ath6kl that runs into issue is when the driver reports roam to same AP event where the AP bss entry already got expired. To fix this, move cfg80211_get_bss() from __cfg80211_roamed() to cfg80211_roamed(). [158645.538384] WARNING: at net/wireless/sme.c:586 __cfg80211_roamed+0xc2/0x1b1() [158645.538810] Call Trace: [158645.538838] [<c1033527>] warn_slowpath_common+0x65/0x7a [158645.538917] [<c14cfacf>] ? __cfg80211_roamed+0xc2/0x1b1 [158645.538946] [<c103354b>] warn_slowpath_null+0xf/0x13 [158645.539055] [<c14cfacf>] __cfg80211_roamed+0xc2/0x1b1 [158645.539086] [<c14beb5b>] cfg80211_process_rdev_events+0x153/0x1cc [158645.539166] [<c14bd57b>] cfg80211_event_work+0x26/0x36 [158645.539195] [<c10482ae>] process_one_work+0x219/0x38b [158645.539273] [<c14bd555>] ? wiphy_new+0x419/0x419 [158645.539301] [<c10486cb>] worker_thread+0xf6/0x1bf [158645.539379] [<c10485d5>] ? rescuer_thread+0x1b5/0x1b5 [158645.539407] [<c104b3e2>] kthread+0x62/0x67 [158645.539484] [<c104b380>] ? __init_kthread_worker+0x42/0x42 [158645.539514] [<c151309a>] kernel_thread_helper+0x6/0xd Reported-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-08 12:58:47 +04:00
struct cfg80211_bss *bss,
const u8 *req_ie, size_t req_ie_len,
const u8 *resp_ie, size_t resp_ie_len)
{
#ifdef CONFIG_CFG80211_WEXT
union iwreq_data wrqu;
#endif
ASSERT_WDEV_LOCK(wdev);
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION &&
wdev->iftype != NL80211_IFTYPE_P2P_CLIENT))
cfg80211: Fix race in bss timeout It is quite possible to run into a race in bss timeout where the drivers see the bss entry just before notifying cfg80211 of a roaming event but it got timed out by the time rdev->event_work got scehduled from cfg80211_wq. This would result in the following WARN-ON() along with the failure to notify the user space of the roaming. The other situation which is happening with ath6kl that runs into issue is when the driver reports roam to same AP event where the AP bss entry already got expired. To fix this, move cfg80211_get_bss() from __cfg80211_roamed() to cfg80211_roamed(). [158645.538384] WARNING: at net/wireless/sme.c:586 __cfg80211_roamed+0xc2/0x1b1() [158645.538810] Call Trace: [158645.538838] [<c1033527>] warn_slowpath_common+0x65/0x7a [158645.538917] [<c14cfacf>] ? __cfg80211_roamed+0xc2/0x1b1 [158645.538946] [<c103354b>] warn_slowpath_null+0xf/0x13 [158645.539055] [<c14cfacf>] __cfg80211_roamed+0xc2/0x1b1 [158645.539086] [<c14beb5b>] cfg80211_process_rdev_events+0x153/0x1cc [158645.539166] [<c14bd57b>] cfg80211_event_work+0x26/0x36 [158645.539195] [<c10482ae>] process_one_work+0x219/0x38b [158645.539273] [<c14bd555>] ? wiphy_new+0x419/0x419 [158645.539301] [<c10486cb>] worker_thread+0xf6/0x1bf [158645.539379] [<c10485d5>] ? rescuer_thread+0x1b5/0x1b5 [158645.539407] [<c104b3e2>] kthread+0x62/0x67 [158645.539484] [<c104b380>] ? __init_kthread_worker+0x42/0x42 [158645.539514] [<c151309a>] kernel_thread_helper+0x6/0xd Reported-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-08 12:58:47 +04:00
goto out;
if (WARN_ON(!wdev->current_bss))
cfg80211: Fix race in bss timeout It is quite possible to run into a race in bss timeout where the drivers see the bss entry just before notifying cfg80211 of a roaming event but it got timed out by the time rdev->event_work got scehduled from cfg80211_wq. This would result in the following WARN-ON() along with the failure to notify the user space of the roaming. The other situation which is happening with ath6kl that runs into issue is when the driver reports roam to same AP event where the AP bss entry already got expired. To fix this, move cfg80211_get_bss() from __cfg80211_roamed() to cfg80211_roamed(). [158645.538384] WARNING: at net/wireless/sme.c:586 __cfg80211_roamed+0xc2/0x1b1() [158645.538810] Call Trace: [158645.538838] [<c1033527>] warn_slowpath_common+0x65/0x7a [158645.538917] [<c14cfacf>] ? __cfg80211_roamed+0xc2/0x1b1 [158645.538946] [<c103354b>] warn_slowpath_null+0xf/0x13 [158645.539055] [<c14cfacf>] __cfg80211_roamed+0xc2/0x1b1 [158645.539086] [<c14beb5b>] cfg80211_process_rdev_events+0x153/0x1cc [158645.539166] [<c14bd57b>] cfg80211_event_work+0x26/0x36 [158645.539195] [<c10482ae>] process_one_work+0x219/0x38b [158645.539273] [<c14bd555>] ? wiphy_new+0x419/0x419 [158645.539301] [<c10486cb>] worker_thread+0xf6/0x1bf [158645.539379] [<c10485d5>] ? rescuer_thread+0x1b5/0x1b5 [158645.539407] [<c104b3e2>] kthread+0x62/0x67 [158645.539484] [<c104b380>] ? __init_kthread_worker+0x42/0x42 [158645.539514] [<c151309a>] kernel_thread_helper+0x6/0xd Reported-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-08 12:58:47 +04:00
goto out;
cfg80211_unhold_bss(wdev->current_bss);
cfg80211_put_bss(wdev->wiphy, &wdev->current_bss->pub);
wdev->current_bss = NULL;
cfg80211_hold_bss(bss_from_pub(bss));
wdev->current_bss = bss_from_pub(bss);
nl80211_send_roamed(wiphy_to_rdev(wdev->wiphy),
wdev->netdev, bss->bssid,
req_ie, req_ie_len, resp_ie, resp_ie_len,
GFP_KERNEL);
#ifdef CONFIG_CFG80211_WEXT
if (req_ie) {
memset(&wrqu, 0, sizeof(wrqu));
wrqu.data.length = req_ie_len;
wireless_send_event(wdev->netdev, IWEVASSOCREQIE,
&wrqu, req_ie);
}
if (resp_ie) {
memset(&wrqu, 0, sizeof(wrqu));
wrqu.data.length = resp_ie_len;
wireless_send_event(wdev->netdev, IWEVASSOCRESPIE,
&wrqu, resp_ie);
}
memset(&wrqu, 0, sizeof(wrqu));
wrqu.ap_addr.sa_family = ARPHRD_ETHER;
cfg80211: Fix race in bss timeout It is quite possible to run into a race in bss timeout where the drivers see the bss entry just before notifying cfg80211 of a roaming event but it got timed out by the time rdev->event_work got scehduled from cfg80211_wq. This would result in the following WARN-ON() along with the failure to notify the user space of the roaming. The other situation which is happening with ath6kl that runs into issue is when the driver reports roam to same AP event where the AP bss entry already got expired. To fix this, move cfg80211_get_bss() from __cfg80211_roamed() to cfg80211_roamed(). [158645.538384] WARNING: at net/wireless/sme.c:586 __cfg80211_roamed+0xc2/0x1b1() [158645.538810] Call Trace: [158645.538838] [<c1033527>] warn_slowpath_common+0x65/0x7a [158645.538917] [<c14cfacf>] ? __cfg80211_roamed+0xc2/0x1b1 [158645.538946] [<c103354b>] warn_slowpath_null+0xf/0x13 [158645.539055] [<c14cfacf>] __cfg80211_roamed+0xc2/0x1b1 [158645.539086] [<c14beb5b>] cfg80211_process_rdev_events+0x153/0x1cc [158645.539166] [<c14bd57b>] cfg80211_event_work+0x26/0x36 [158645.539195] [<c10482ae>] process_one_work+0x219/0x38b [158645.539273] [<c14bd555>] ? wiphy_new+0x419/0x419 [158645.539301] [<c10486cb>] worker_thread+0xf6/0x1bf [158645.539379] [<c10485d5>] ? rescuer_thread+0x1b5/0x1b5 [158645.539407] [<c104b3e2>] kthread+0x62/0x67 [158645.539484] [<c104b380>] ? __init_kthread_worker+0x42/0x42 [158645.539514] [<c151309a>] kernel_thread_helper+0x6/0xd Reported-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-08 12:58:47 +04:00
memcpy(wrqu.ap_addr.sa_data, bss->bssid, ETH_ALEN);
memcpy(wdev->wext.prev_bssid, bss->bssid, ETH_ALEN);
wdev->wext.prev_bssid_valid = true;
wireless_send_event(wdev->netdev, SIOCGIWAP, &wrqu, NULL);
#endif
cfg80211: Fix race in bss timeout It is quite possible to run into a race in bss timeout where the drivers see the bss entry just before notifying cfg80211 of a roaming event but it got timed out by the time rdev->event_work got scehduled from cfg80211_wq. This would result in the following WARN-ON() along with the failure to notify the user space of the roaming. The other situation which is happening with ath6kl that runs into issue is when the driver reports roam to same AP event where the AP bss entry already got expired. To fix this, move cfg80211_get_bss() from __cfg80211_roamed() to cfg80211_roamed(). [158645.538384] WARNING: at net/wireless/sme.c:586 __cfg80211_roamed+0xc2/0x1b1() [158645.538810] Call Trace: [158645.538838] [<c1033527>] warn_slowpath_common+0x65/0x7a [158645.538917] [<c14cfacf>] ? __cfg80211_roamed+0xc2/0x1b1 [158645.538946] [<c103354b>] warn_slowpath_null+0xf/0x13 [158645.539055] [<c14cfacf>] __cfg80211_roamed+0xc2/0x1b1 [158645.539086] [<c14beb5b>] cfg80211_process_rdev_events+0x153/0x1cc [158645.539166] [<c14bd57b>] cfg80211_event_work+0x26/0x36 [158645.539195] [<c10482ae>] process_one_work+0x219/0x38b [158645.539273] [<c14bd555>] ? wiphy_new+0x419/0x419 [158645.539301] [<c10486cb>] worker_thread+0xf6/0x1bf [158645.539379] [<c10485d5>] ? rescuer_thread+0x1b5/0x1b5 [158645.539407] [<c104b3e2>] kthread+0x62/0x67 [158645.539484] [<c104b380>] ? __init_kthread_worker+0x42/0x42 [158645.539514] [<c151309a>] kernel_thread_helper+0x6/0xd Reported-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-08 12:58:47 +04:00
return;
out:
cfg80211_put_bss(wdev->wiphy, bss);
}
void cfg80211_roamed(struct net_device *dev,
struct ieee80211_channel *channel,
const u8 *bssid,
const u8 *req_ie, size_t req_ie_len,
const u8 *resp_ie, size_t resp_ie_len, gfp_t gfp)
cfg80211: Fix race in bss timeout It is quite possible to run into a race in bss timeout where the drivers see the bss entry just before notifying cfg80211 of a roaming event but it got timed out by the time rdev->event_work got scehduled from cfg80211_wq. This would result in the following WARN-ON() along with the failure to notify the user space of the roaming. The other situation which is happening with ath6kl that runs into issue is when the driver reports roam to same AP event where the AP bss entry already got expired. To fix this, move cfg80211_get_bss() from __cfg80211_roamed() to cfg80211_roamed(). [158645.538384] WARNING: at net/wireless/sme.c:586 __cfg80211_roamed+0xc2/0x1b1() [158645.538810] Call Trace: [158645.538838] [<c1033527>] warn_slowpath_common+0x65/0x7a [158645.538917] [<c14cfacf>] ? __cfg80211_roamed+0xc2/0x1b1 [158645.538946] [<c103354b>] warn_slowpath_null+0xf/0x13 [158645.539055] [<c14cfacf>] __cfg80211_roamed+0xc2/0x1b1 [158645.539086] [<c14beb5b>] cfg80211_process_rdev_events+0x153/0x1cc [158645.539166] [<c14bd57b>] cfg80211_event_work+0x26/0x36 [158645.539195] [<c10482ae>] process_one_work+0x219/0x38b [158645.539273] [<c14bd555>] ? wiphy_new+0x419/0x419 [158645.539301] [<c10486cb>] worker_thread+0xf6/0x1bf [158645.539379] [<c10485d5>] ? rescuer_thread+0x1b5/0x1b5 [158645.539407] [<c104b3e2>] kthread+0x62/0x67 [158645.539484] [<c104b380>] ? __init_kthread_worker+0x42/0x42 [158645.539514] [<c151309a>] kernel_thread_helper+0x6/0xd Reported-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-08 12:58:47 +04:00
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_bss *bss;
bss = cfg80211_get_bss(wdev->wiphy, channel, bssid, wdev->ssid,
wdev->ssid_len,
IEEE80211_BSS_TYPE_ESS, IEEE80211_PRIVACY_ANY);
cfg80211: Fix race in bss timeout It is quite possible to run into a race in bss timeout where the drivers see the bss entry just before notifying cfg80211 of a roaming event but it got timed out by the time rdev->event_work got scehduled from cfg80211_wq. This would result in the following WARN-ON() along with the failure to notify the user space of the roaming. The other situation which is happening with ath6kl that runs into issue is when the driver reports roam to same AP event where the AP bss entry already got expired. To fix this, move cfg80211_get_bss() from __cfg80211_roamed() to cfg80211_roamed(). [158645.538384] WARNING: at net/wireless/sme.c:586 __cfg80211_roamed+0xc2/0x1b1() [158645.538810] Call Trace: [158645.538838] [<c1033527>] warn_slowpath_common+0x65/0x7a [158645.538917] [<c14cfacf>] ? __cfg80211_roamed+0xc2/0x1b1 [158645.538946] [<c103354b>] warn_slowpath_null+0xf/0x13 [158645.539055] [<c14cfacf>] __cfg80211_roamed+0xc2/0x1b1 [158645.539086] [<c14beb5b>] cfg80211_process_rdev_events+0x153/0x1cc [158645.539166] [<c14bd57b>] cfg80211_event_work+0x26/0x36 [158645.539195] [<c10482ae>] process_one_work+0x219/0x38b [158645.539273] [<c14bd555>] ? wiphy_new+0x419/0x419 [158645.539301] [<c10486cb>] worker_thread+0xf6/0x1bf [158645.539379] [<c10485d5>] ? rescuer_thread+0x1b5/0x1b5 [158645.539407] [<c104b3e2>] kthread+0x62/0x67 [158645.539484] [<c104b380>] ? __init_kthread_worker+0x42/0x42 [158645.539514] [<c151309a>] kernel_thread_helper+0x6/0xd Reported-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-08 12:58:47 +04:00
if (WARN_ON(!bss))
return;
cfg80211_roamed_bss(dev, bss, req_ie, req_ie_len, resp_ie,
resp_ie_len, gfp);
}
EXPORT_SYMBOL(cfg80211_roamed);
/* Consumes bss object one way or another */
cfg80211: Fix race in bss timeout It is quite possible to run into a race in bss timeout where the drivers see the bss entry just before notifying cfg80211 of a roaming event but it got timed out by the time rdev->event_work got scehduled from cfg80211_wq. This would result in the following WARN-ON() along with the failure to notify the user space of the roaming. The other situation which is happening with ath6kl that runs into issue is when the driver reports roam to same AP event where the AP bss entry already got expired. To fix this, move cfg80211_get_bss() from __cfg80211_roamed() to cfg80211_roamed(). [158645.538384] WARNING: at net/wireless/sme.c:586 __cfg80211_roamed+0xc2/0x1b1() [158645.538810] Call Trace: [158645.538838] [<c1033527>] warn_slowpath_common+0x65/0x7a [158645.538917] [<c14cfacf>] ? __cfg80211_roamed+0xc2/0x1b1 [158645.538946] [<c103354b>] warn_slowpath_null+0xf/0x13 [158645.539055] [<c14cfacf>] __cfg80211_roamed+0xc2/0x1b1 [158645.539086] [<c14beb5b>] cfg80211_process_rdev_events+0x153/0x1cc [158645.539166] [<c14bd57b>] cfg80211_event_work+0x26/0x36 [158645.539195] [<c10482ae>] process_one_work+0x219/0x38b [158645.539273] [<c14bd555>] ? wiphy_new+0x419/0x419 [158645.539301] [<c10486cb>] worker_thread+0xf6/0x1bf [158645.539379] [<c10485d5>] ? rescuer_thread+0x1b5/0x1b5 [158645.539407] [<c104b3e2>] kthread+0x62/0x67 [158645.539484] [<c104b380>] ? __init_kthread_worker+0x42/0x42 [158645.539514] [<c151309a>] kernel_thread_helper+0x6/0xd Reported-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-08 12:58:47 +04:00
void cfg80211_roamed_bss(struct net_device *dev,
struct cfg80211_bss *bss, const u8 *req_ie,
size_t req_ie_len, const u8 *resp_ie,
size_t resp_ie_len, gfp_t gfp)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
struct cfg80211_event *ev;
unsigned long flags;
cfg80211: Fix race in bss timeout It is quite possible to run into a race in bss timeout where the drivers see the bss entry just before notifying cfg80211 of a roaming event but it got timed out by the time rdev->event_work got scehduled from cfg80211_wq. This would result in the following WARN-ON() along with the failure to notify the user space of the roaming. The other situation which is happening with ath6kl that runs into issue is when the driver reports roam to same AP event where the AP bss entry already got expired. To fix this, move cfg80211_get_bss() from __cfg80211_roamed() to cfg80211_roamed(). [158645.538384] WARNING: at net/wireless/sme.c:586 __cfg80211_roamed+0xc2/0x1b1() [158645.538810] Call Trace: [158645.538838] [<c1033527>] warn_slowpath_common+0x65/0x7a [158645.538917] [<c14cfacf>] ? __cfg80211_roamed+0xc2/0x1b1 [158645.538946] [<c103354b>] warn_slowpath_null+0xf/0x13 [158645.539055] [<c14cfacf>] __cfg80211_roamed+0xc2/0x1b1 [158645.539086] [<c14beb5b>] cfg80211_process_rdev_events+0x153/0x1cc [158645.539166] [<c14bd57b>] cfg80211_event_work+0x26/0x36 [158645.539195] [<c10482ae>] process_one_work+0x219/0x38b [158645.539273] [<c14bd555>] ? wiphy_new+0x419/0x419 [158645.539301] [<c10486cb>] worker_thread+0xf6/0x1bf [158645.539379] [<c10485d5>] ? rescuer_thread+0x1b5/0x1b5 [158645.539407] [<c104b3e2>] kthread+0x62/0x67 [158645.539484] [<c104b380>] ? __init_kthread_worker+0x42/0x42 [158645.539514] [<c151309a>] kernel_thread_helper+0x6/0xd Reported-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-08 12:58:47 +04:00
if (WARN_ON(!bss))
return;
ev = kzalloc(sizeof(*ev) + req_ie_len + resp_ie_len, gfp);
cfg80211: Fix race in bss timeout It is quite possible to run into a race in bss timeout where the drivers see the bss entry just before notifying cfg80211 of a roaming event but it got timed out by the time rdev->event_work got scehduled from cfg80211_wq. This would result in the following WARN-ON() along with the failure to notify the user space of the roaming. The other situation which is happening with ath6kl that runs into issue is when the driver reports roam to same AP event where the AP bss entry already got expired. To fix this, move cfg80211_get_bss() from __cfg80211_roamed() to cfg80211_roamed(). [158645.538384] WARNING: at net/wireless/sme.c:586 __cfg80211_roamed+0xc2/0x1b1() [158645.538810] Call Trace: [158645.538838] [<c1033527>] warn_slowpath_common+0x65/0x7a [158645.538917] [<c14cfacf>] ? __cfg80211_roamed+0xc2/0x1b1 [158645.538946] [<c103354b>] warn_slowpath_null+0xf/0x13 [158645.539055] [<c14cfacf>] __cfg80211_roamed+0xc2/0x1b1 [158645.539086] [<c14beb5b>] cfg80211_process_rdev_events+0x153/0x1cc [158645.539166] [<c14bd57b>] cfg80211_event_work+0x26/0x36 [158645.539195] [<c10482ae>] process_one_work+0x219/0x38b [158645.539273] [<c14bd555>] ? wiphy_new+0x419/0x419 [158645.539301] [<c10486cb>] worker_thread+0xf6/0x1bf [158645.539379] [<c10485d5>] ? rescuer_thread+0x1b5/0x1b5 [158645.539407] [<c104b3e2>] kthread+0x62/0x67 [158645.539484] [<c104b380>] ? __init_kthread_worker+0x42/0x42 [158645.539514] [<c151309a>] kernel_thread_helper+0x6/0xd Reported-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-08 12:58:47 +04:00
if (!ev) {
cfg80211_put_bss(wdev->wiphy, bss);
return;
cfg80211: Fix race in bss timeout It is quite possible to run into a race in bss timeout where the drivers see the bss entry just before notifying cfg80211 of a roaming event but it got timed out by the time rdev->event_work got scehduled from cfg80211_wq. This would result in the following WARN-ON() along with the failure to notify the user space of the roaming. The other situation which is happening with ath6kl that runs into issue is when the driver reports roam to same AP event where the AP bss entry already got expired. To fix this, move cfg80211_get_bss() from __cfg80211_roamed() to cfg80211_roamed(). [158645.538384] WARNING: at net/wireless/sme.c:586 __cfg80211_roamed+0xc2/0x1b1() [158645.538810] Call Trace: [158645.538838] [<c1033527>] warn_slowpath_common+0x65/0x7a [158645.538917] [<c14cfacf>] ? __cfg80211_roamed+0xc2/0x1b1 [158645.538946] [<c103354b>] warn_slowpath_null+0xf/0x13 [158645.539055] [<c14cfacf>] __cfg80211_roamed+0xc2/0x1b1 [158645.539086] [<c14beb5b>] cfg80211_process_rdev_events+0x153/0x1cc [158645.539166] [<c14bd57b>] cfg80211_event_work+0x26/0x36 [158645.539195] [<c10482ae>] process_one_work+0x219/0x38b [158645.539273] [<c14bd555>] ? wiphy_new+0x419/0x419 [158645.539301] [<c10486cb>] worker_thread+0xf6/0x1bf [158645.539379] [<c10485d5>] ? rescuer_thread+0x1b5/0x1b5 [158645.539407] [<c104b3e2>] kthread+0x62/0x67 [158645.539484] [<c104b380>] ? __init_kthread_worker+0x42/0x42 [158645.539514] [<c151309a>] kernel_thread_helper+0x6/0xd Reported-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-08 12:58:47 +04:00
}
ev->type = EVENT_ROAMED;
ev->rm.req_ie = ((u8 *)ev) + sizeof(*ev);
ev->rm.req_ie_len = req_ie_len;
memcpy((void *)ev->rm.req_ie, req_ie, req_ie_len);
ev->rm.resp_ie = ((u8 *)ev) + sizeof(*ev) + req_ie_len;
ev->rm.resp_ie_len = resp_ie_len;
memcpy((void *)ev->rm.resp_ie, resp_ie, resp_ie_len);
cfg80211: Fix race in bss timeout It is quite possible to run into a race in bss timeout where the drivers see the bss entry just before notifying cfg80211 of a roaming event but it got timed out by the time rdev->event_work got scehduled from cfg80211_wq. This would result in the following WARN-ON() along with the failure to notify the user space of the roaming. The other situation which is happening with ath6kl that runs into issue is when the driver reports roam to same AP event where the AP bss entry already got expired. To fix this, move cfg80211_get_bss() from __cfg80211_roamed() to cfg80211_roamed(). [158645.538384] WARNING: at net/wireless/sme.c:586 __cfg80211_roamed+0xc2/0x1b1() [158645.538810] Call Trace: [158645.538838] [<c1033527>] warn_slowpath_common+0x65/0x7a [158645.538917] [<c14cfacf>] ? __cfg80211_roamed+0xc2/0x1b1 [158645.538946] [<c103354b>] warn_slowpath_null+0xf/0x13 [158645.539055] [<c14cfacf>] __cfg80211_roamed+0xc2/0x1b1 [158645.539086] [<c14beb5b>] cfg80211_process_rdev_events+0x153/0x1cc [158645.539166] [<c14bd57b>] cfg80211_event_work+0x26/0x36 [158645.539195] [<c10482ae>] process_one_work+0x219/0x38b [158645.539273] [<c14bd555>] ? wiphy_new+0x419/0x419 [158645.539301] [<c10486cb>] worker_thread+0xf6/0x1bf [158645.539379] [<c10485d5>] ? rescuer_thread+0x1b5/0x1b5 [158645.539407] [<c104b3e2>] kthread+0x62/0x67 [158645.539484] [<c104b380>] ? __init_kthread_worker+0x42/0x42 [158645.539514] [<c151309a>] kernel_thread_helper+0x6/0xd Reported-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-08 12:58:47 +04:00
ev->rm.bss = bss;
spin_lock_irqsave(&wdev->event_lock, flags);
list_add_tail(&ev->list, &wdev->event_list);
spin_unlock_irqrestore(&wdev->event_lock, flags);
queue_work(cfg80211_wq, &rdev->event_work);
}
cfg80211: Fix race in bss timeout It is quite possible to run into a race in bss timeout where the drivers see the bss entry just before notifying cfg80211 of a roaming event but it got timed out by the time rdev->event_work got scehduled from cfg80211_wq. This would result in the following WARN-ON() along with the failure to notify the user space of the roaming. The other situation which is happening with ath6kl that runs into issue is when the driver reports roam to same AP event where the AP bss entry already got expired. To fix this, move cfg80211_get_bss() from __cfg80211_roamed() to cfg80211_roamed(). [158645.538384] WARNING: at net/wireless/sme.c:586 __cfg80211_roamed+0xc2/0x1b1() [158645.538810] Call Trace: [158645.538838] [<c1033527>] warn_slowpath_common+0x65/0x7a [158645.538917] [<c14cfacf>] ? __cfg80211_roamed+0xc2/0x1b1 [158645.538946] [<c103354b>] warn_slowpath_null+0xf/0x13 [158645.539055] [<c14cfacf>] __cfg80211_roamed+0xc2/0x1b1 [158645.539086] [<c14beb5b>] cfg80211_process_rdev_events+0x153/0x1cc [158645.539166] [<c14bd57b>] cfg80211_event_work+0x26/0x36 [158645.539195] [<c10482ae>] process_one_work+0x219/0x38b [158645.539273] [<c14bd555>] ? wiphy_new+0x419/0x419 [158645.539301] [<c10486cb>] worker_thread+0xf6/0x1bf [158645.539379] [<c10485d5>] ? rescuer_thread+0x1b5/0x1b5 [158645.539407] [<c104b3e2>] kthread+0x62/0x67 [158645.539484] [<c104b380>] ? __init_kthread_worker+0x42/0x42 [158645.539514] [<c151309a>] kernel_thread_helper+0x6/0xd Reported-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Vasanthakumar Thiagarajan <vthiagar@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-12-08 12:58:47 +04:00
EXPORT_SYMBOL(cfg80211_roamed_bss);
void __cfg80211_disconnected(struct net_device *dev, const u8 *ie,
size_t ie_len, u16 reason, bool from_ap)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
int i;
#ifdef CONFIG_CFG80211_WEXT
union iwreq_data wrqu;
#endif
ASSERT_WDEV_LOCK(wdev);
if (WARN_ON(wdev->iftype != NL80211_IFTYPE_STATION &&
wdev->iftype != NL80211_IFTYPE_P2P_CLIENT))
return;
if (wdev->current_bss) {
cfg80211_unhold_bss(wdev->current_bss);
cfg80211_put_bss(wdev->wiphy, &wdev->current_bss->pub);
}
wdev->current_bss = NULL;
wdev->ssid_len = 0;
nl80211_send_disconnected(rdev, dev, reason, ie, ie_len, from_ap);
/*
* Delete all the keys ... pairwise keys can't really
* exist any more anyway, but default keys might.
*/
if (rdev->ops->del_key)
for (i = 0; i < 6; i++)
rdev_del_key(rdev, dev, i, false, NULL);
rdev_set_qos_map(rdev, dev, NULL);
#ifdef CONFIG_CFG80211_WEXT
memset(&wrqu, 0, sizeof(wrqu));
wrqu.ap_addr.sa_family = ARPHRD_ETHER;
wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL);
wdev->wext.connect.ssid_len = 0;
#endif
schedule_work(&cfg80211_disconnect_work);
}
void cfg80211_disconnected(struct net_device *dev, u16 reason,
const u8 *ie, size_t ie_len, gfp_t gfp)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
struct cfg80211_registered_device *rdev = wiphy_to_rdev(wdev->wiphy);
struct cfg80211_event *ev;
unsigned long flags;
ev = kzalloc(sizeof(*ev) + ie_len, gfp);
if (!ev)
return;
ev->type = EVENT_DISCONNECTED;
ev->dc.ie = ((u8 *)ev) + sizeof(*ev);
ev->dc.ie_len = ie_len;
memcpy((void *)ev->dc.ie, ie, ie_len);
ev->dc.reason = reason;
spin_lock_irqsave(&wdev->event_lock, flags);
list_add_tail(&ev->list, &wdev->event_list);
spin_unlock_irqrestore(&wdev->event_lock, flags);
queue_work(cfg80211_wq, &rdev->event_work);
}
EXPORT_SYMBOL(cfg80211_disconnected);
/*
* API calls for nl80211/wext compatibility code
*/
int cfg80211_connect(struct cfg80211_registered_device *rdev,
struct net_device *dev,
struct cfg80211_connect_params *connect,
struct cfg80211_cached_keys *connkeys,
const u8 *prev_bssid)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
int err;
ASSERT_WDEV_LOCK(wdev);
if (WARN_ON(wdev->connect_keys)) {
kzfree(wdev->connect_keys);
wdev->connect_keys = NULL;
}
cfg80211_oper_and_ht_capa(&connect->ht_capa_mask,
rdev->wiphy.ht_capa_mod_mask);
if (connkeys && connkeys->def >= 0) {
int idx;
u32 cipher;
idx = connkeys->def;
cipher = connkeys->params[idx].cipher;
/* If given a WEP key we may need it for shared key auth */
if (cipher == WLAN_CIPHER_SUITE_WEP40 ||
cipher == WLAN_CIPHER_SUITE_WEP104) {
connect->key_idx = idx;
connect->key = connkeys->params[idx].key;
connect->key_len = connkeys->params[idx].key_len;
/*
* If ciphers are not set (e.g. when going through
* iwconfig), we have to set them appropriately here.
*/
if (connect->crypto.cipher_group == 0)
connect->crypto.cipher_group = cipher;
if (connect->crypto.n_ciphers_pairwise == 0) {
connect->crypto.n_ciphers_pairwise = 1;
connect->crypto.ciphers_pairwise[0] = cipher;
}
}
}
wdev->connect_keys = connkeys;
memcpy(wdev->ssid, connect->ssid, connect->ssid_len);
wdev->ssid_len = connect->ssid_len;
if (!rdev->ops->connect)
err = cfg80211_sme_connect(wdev, connect, prev_bssid);
else
err = rdev_connect(rdev, dev, connect);
if (err) {
wdev->connect_keys = NULL;
wdev->ssid_len = 0;
return err;
}
return 0;
}
int cfg80211_disconnect(struct cfg80211_registered_device *rdev,
struct net_device *dev, u16 reason, bool wextev)
{
struct wireless_dev *wdev = dev->ieee80211_ptr;
int err = 0;
ASSERT_WDEV_LOCK(wdev);
kzfree(wdev->connect_keys);
wdev->connect_keys = NULL;
if (wdev->conn)
err = cfg80211_sme_disconnect(wdev, reason);
else if (!rdev->ops->disconnect)
cfg80211_mlme_down(rdev, dev);
else if (wdev->current_bss)
err = rdev_disconnect(rdev, dev, reason);
return err;
}