WSL2-Linux-Kernel/include/scsi/scsi_bsg_fc.h

323 строки
8.5 KiB
C
Исходник Обычный вид История

[SCSI] FC Pass Thru support Attached is the ELS/CT pass-thru patch for the FC Transport. The patch creates a generic framework that lays on top of bsg and the SGIO v4 ioctl in order to pass transaction requests to LLDD's. The interface supports the following operations: On an fc_host basis: Request login to the specified N_Port_ID, creating an fc_rport. Request logout of the specified N_Port_ID, deleting an fc_rport Send ELS request to specified N_Port_ID w/o requiring a login, and wait for ELS response. Send CT request to specified N_Port_ID and wait for CT response. Login is required, but LLDD is allowed to manage login and decide whether it stays in place after the request is satisfied. Vendor-Unique request. Allows a LLDD-specific request to be passed to the LLDD, and the passing of a response back to the application. On an fc_rport basis: Send ELS request to nport and wait for ELS response. Send CT request to nport and wait for CT response. The patch also exports several headers from include/scsi such that they can be available to user-space applications: include/scsi/scsi.h include/scsi/scsi_netlink.h include/scsi/scsi_netlink_fc.h include/scsi/scsi_bsg_fc.h For further information, refer to the last RFC: http://marc.info/?l=linux-scsi&m=123436574018579&w=2 Note: Documentation is still spotty and will be added later. [bharrosh@panasas.com: update for new block API] Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-03-26 20:33:19 +03:00
/*
* FC Transport BSG Interface
*
* Copyright (C) 2008 James Smart, Emulex Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#ifndef SCSI_BSG_FC_H
#define SCSI_BSG_FC_H
/*
* This file intended to be included by both kernel and user space
*/
#include <scsi/scsi.h>
/*
* FC Transport SGIO v4 BSG Message Support
*/
/* Default BSG request timeout (in seconds) */
#define FC_DEFAULT_BSG_TIMEOUT (10 * HZ)
/*
* Request Message Codes supported by the FC Transport
*/
/* define the class masks for the message codes */
#define FC_BSG_CLS_MASK 0xF0000000 /* find object class */
#define FC_BSG_HST_MASK 0x80000000 /* fc host class */
#define FC_BSG_RPT_MASK 0x40000000 /* fc rport class */
/* fc_host Message Codes */
#define FC_BSG_HST_ADD_RPORT (FC_BSG_HST_MASK | 0x00000001)
#define FC_BSG_HST_DEL_RPORT (FC_BSG_HST_MASK | 0x00000002)
#define FC_BSG_HST_ELS_NOLOGIN (FC_BSG_HST_MASK | 0x00000003)
#define FC_BSG_HST_CT (FC_BSG_HST_MASK | 0x00000004)
#define FC_BSG_HST_VENDOR (FC_BSG_HST_MASK | 0x000000FF)
/* fc_rport Message Codes */
#define FC_BSG_RPT_ELS (FC_BSG_RPT_MASK | 0x00000001)
#define FC_BSG_RPT_CT (FC_BSG_RPT_MASK | 0x00000002)
/*
* FC Address Identifiers in Message Structures :
*
* Whenever a command payload contains a FC Address Identifier
* (aka port_id), the value is effectively in big-endian
* order, thus the array elements are decoded as follows:
* element [0] is bits 23:16 of the FC Address Identifier
* element [1] is bits 15:8 of the FC Address Identifier
* element [2] is bits 7:0 of the FC Address Identifier
*/
/*
* FC Host Messages
*/
/* FC_BSG_HST_ADDR_PORT : */
/* Request:
* This message requests the FC host to login to the remote port
* at the specified N_Port_Id. The remote port is to be enumerated
* with the transport upon completion of the login.
*/
struct fc_bsg_host_add_rport {
uint8_t reserved;
/* FC Address Identier of the remote port to login to */
uint8_t port_id[3];
};
/* Response:
* There is no additional response data - fc_bsg_reply->result is sufficient
*/
/* FC_BSG_HST_DEL_RPORT : */
/* Request:
* This message requests the FC host to remove an enumerated
* remote port and to terminate the login to it.
*
* Note: The driver is free to reject this request if it desires to
* remain logged in with the remote port.
*/
struct fc_bsg_host_del_rport {
uint8_t reserved;
/* FC Address Identier of the remote port to logout of */
uint8_t port_id[3];
};
/* Response:
* There is no additional response data - fc_bsg_reply->result is sufficient
*/
/* FC_BSG_HST_ELS_NOLOGIN : */
/* Request:
* This message requests the FC_Host to send an ELS to a specific
* N_Port_ID. The host does not need to log into the remote port,
* nor does it need to enumerate the rport for further traffic
* (although, the FC host is free to do so if it desires).
*/
struct fc_bsg_host_els {
/*
* ELS Command Code being sent (must be the same as byte 0
* of the payload)
*/
uint8_t command_code;
/* FC Address Identier of the remote port to send the ELS to */
uint8_t port_id[3];
};
/* Response:
*/
/* fc_bsg_ctels_reply->status values */
#define FC_CTELS_STATUS_OK 0x00000000
#define FC_CTELS_STATUS_REJECT 0x00000001
#define FC_CTELS_STATUS_P_RJT 0x00000002
#define FC_CTELS_STATUS_F_RJT 0x00000003
#define FC_CTELS_STATUS_P_BSY 0x00000004
#define FC_CTELS_STATUS_F_BSY 0x00000006
struct fc_bsg_ctels_reply {
/*
* Note: An ELS LS_RJT may be reported in 2 ways:
* a) A status of FC_CTELS_STATUS_OK is returned. The caller
* is to look into the ELS receive payload to determine
* LS_ACC or LS_RJT (by contents of word 0). The reject
* data will be in word 1.
* b) A status of FC_CTELS_STATUS_REJECT is returned, The
* rjt_data field will contain valid data.
*
* Note: ELS LS_ACC is determined by an FC_CTELS_STATUS_OK, and
* the receive payload word 0 indicates LS_ACC
* (e.g. value is 0x02xxxxxx).
*
* Note: Similarly, a CT Reject may be reported in 2 ways:
* a) A status of FC_CTELS_STATUS_OK is returned. The caller
* is to look into the CT receive payload to determine
* Accept or Reject (by contents of word 2). The reject
* data will be in word 3.
* b) A status of FC_CTELS_STATUS_REJECT is returned, The
* rjt_data field will contain valid data.
*
* Note: x_RJT/BSY status will indicae that the rjt_data field
* is valid and contains the reason/explanation values.
*/
uint32_t status; /* See FC_CTELS_STATUS_xxx */
/* valid if status is not FC_CTELS_STATUS_OK */
struct {
uint8_t action; /* fragment_id for CT REJECT */
uint8_t reason_code;
uint8_t reason_explanation;
uint8_t vendor_unique;
} rjt_data;
};
/* FC_BSG_HST_CT : */
/* Request:
* This message requests that a CT Request be performed with the
* indicated N_Port_ID. The driver is responsible for logging in with
* the fabric and/or N_Port_ID, etc as per FC rules. This request does
* not mandate that the driver must enumerate the destination in the
* transport. The driver is allowed to decide whether to enumerate it,
* and whether to tear it down after the request.
*/
struct fc_bsg_host_ct {
uint8_t reserved;
/* FC Address Identier of the remote port to send the ELS to */
uint8_t port_id[3];
/*
* We need words 0-2 of the generic preamble for the LLD's
*/
uint32_t preamble_word0; /* revision & IN_ID */
uint32_t preamble_word1; /* GS_Type, GS_SubType, Options, Rsvd */
uint32_t preamble_word2; /* Cmd Code, Max Size */
};
/* Response:
*
* The reply structure is an fc_bsg_ctels_reply structure
*/
/* FC_BSG_HST_VENDOR : */
/* Request:
* Note: When specifying vendor_id, be sure to read the Vendor Type and ID
* formatting requirements specified in scsi_netlink.h
*/
struct fc_bsg_host_vendor {
/*
* Identifies the vendor that the message is formatted for. This
* should be the recipient of the message.
*/
uint64_t vendor_id;
/* start of vendor command area */
uint32_t vendor_cmd[0];
};
/* Response:
*/
struct fc_bsg_host_vendor_reply {
/* start of vendor response area */
uint32_t vendor_rsp[0];
};
/*
* FC Remote Port Messages
*/
/* FC_BSG_RPT_ELS : */
/* Request:
* This message requests that an ELS be performed with the rport.
*/
struct fc_bsg_rport_els {
/*
* ELS Command Code being sent (must be the same as
* byte 0 of the payload)
*/
uint8_t els_code;
};
/* Response:
*
* The reply structure is an fc_bsg_ctels_reply structure
*/
/* FC_BSG_RPT_CT : */
/* Request:
* This message requests that a CT Request be performed with the rport.
*/
struct fc_bsg_rport_ct {
/*
* We need words 0-2 of the generic preamble for the LLD's
*/
uint32_t preamble_word0; /* revision & IN_ID */
uint32_t preamble_word1; /* GS_Type, GS_SubType, Options, Rsvd */
uint32_t preamble_word2; /* Cmd Code, Max Size */
};
/* Response:
*
* The reply structure is an fc_bsg_ctels_reply structure
*/
/* request (CDB) structure of the sg_io_v4 */
struct fc_bsg_request {
uint32_t msgcode;
union {
struct fc_bsg_host_add_rport h_addrport;
struct fc_bsg_host_del_rport h_delrport;
struct fc_bsg_host_els h_els;
struct fc_bsg_host_ct h_ct;
struct fc_bsg_host_vendor h_vendor;
struct fc_bsg_rport_els r_els;
struct fc_bsg_rport_ct r_ct;
} rqst_data;
};
/* response (request sense data) structure of the sg_io_v4 */
struct fc_bsg_reply {
/*
* The completion result. Result exists in two forms:
* if negative, it is an -Exxx system errno value. There will
* be no further reply information supplied.
* else, it's the 4-byte scsi error result, with driver, host,
* msg and status fields. The per-msgcode reply structure
* will contain valid data.
*/
uint32_t result;
/* If there was reply_payload, how much was recevied ? */
uint32_t reply_payload_rcv_len;
union {
struct fc_bsg_host_vendor_reply vendor_reply;
struct fc_bsg_ctels_reply ctels_reply;
} reply_data;
};
#endif /* SCSI_BSG_FC_H */