WSL2-Linux-Kernel/arch/x86/lib/csum-wrappers_64.c

159 строки
3.9 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright 2002, 2003 Andi Kleen, SuSE Labs.
*
* Wrappers of assembly checksum functions for x86-64.
*/
#include <asm/checksum.h>
#include <linux/export.h>
#include <linux/uaccess.h>
#include <asm/smap.h>
/**
* csum_partial_copy_from_user - Copy and checksum from user space.
* @src: source address (user space)
* @dst: destination address
* @len: number of bytes to be copied.
* @isum: initial sum that is added into the result (32bit unfolded)
* @errp: set to -EFAULT for an bad source address.
*
* Returns an 32bit unfolded checksum of the buffer.
* src and dst are best aligned to 64bits.
*/
__wsum
csum_partial_copy_from_user(const void __user *src, void *dst,
int len, __wsum isum, int *errp)
{
might_sleep();
*errp = 0;
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 05:57:57 +03:00
if (!likely(access_ok(src, len)))
goto out_err;
/*
* Why 6, not 7? To handle odd addresses aligned we
* would need to do considerable complications to fix the
* checksum which is defined as an 16bit accumulator. The
* fix alignment code is primarily for performance
* compatibility with 32bit and that will handle odd
* addresses slowly too.
*/
if (unlikely((unsigned long)src & 6)) {
while (((unsigned long)src & 6) && len >= 2) {
__u16 val16;
if (__get_user(val16, (const __u16 __user *)src))
goto out_err;
*(__u16 *)dst = val16;
isum = (__force __wsum)add32_with_carry(
(__force unsigned)isum, val16);
src += 2;
dst += 2;
len -= 2;
}
}
stac();
isum = csum_partial_copy_generic((__force const void *)src,
dst, len, isum, errp, NULL);
clac();
if (unlikely(*errp))
goto out_err;
return isum;
out_err:
*errp = -EFAULT;
memset(dst, 0, len);
return isum;
}
EXPORT_SYMBOL(csum_partial_copy_from_user);
/**
* csum_and_copy_to_user - Copy and checksum to user space.
* @src: source address
* @dst: destination address (user space)
* @len: number of bytes to be copied.
* @isum: initial sum that is added into the result (32bit unfolded)
* @errp: set to -EFAULT for an bad destination address.
*
* Returns an 32bit unfolded checksum of the buffer.
* src and dst are best aligned to 64bits.
*/
__wsum
csum_and_copy_to_user(const void *src, void __user *dst,
int len, __wsum isum, int *errp)
{
__wsum ret;
might_sleep();
Remove 'type' argument from access_ok() function Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument of the user address range verification function since we got rid of the old racy i386-only code to walk page tables by hand. It existed because the original 80386 would not honor the write protect bit when in kernel mode, so you had to do COW by hand before doing any user access. But we haven't supported that in a long time, and these days the 'type' argument is a purely historical artifact. A discussion about extending 'user_access_begin()' to do the range checking resulted this patch, because there is no way we're going to move the old VERIFY_xyz interface to that model. And it's best done at the end of the merge window when I've done most of my merges, so let's just get this done once and for all. This patch was mostly done with a sed-script, with manual fix-ups for the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form. There were a couple of notable cases: - csky still had the old "verify_area()" name as an alias. - the iter_iov code had magical hardcoded knowledge of the actual values of VERIFY_{READ,WRITE} (not that they mattered, since nothing really used it) - microblaze used the type argument for a debug printout but other than those oddities this should be a total no-op patch. I tried to fix up all architectures, did fairly extensive grepping for access_ok() uses, and the changes are trivial, but I may have missed something. Any missed conversion should be trivially fixable, though. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-04 05:57:57 +03:00
if (unlikely(!access_ok(dst, len))) {
*errp = -EFAULT;
return 0;
}
if (unlikely((unsigned long)dst & 6)) {
while (((unsigned long)dst & 6) && len >= 2) {
__u16 val16 = *(__u16 *)src;
isum = (__force __wsum)add32_with_carry(
(__force unsigned)isum, val16);
*errp = __put_user(val16, (__u16 __user *)dst);
if (*errp)
return isum;
src += 2;
dst += 2;
len -= 2;
}
}
*errp = 0;
stac();
ret = csum_partial_copy_generic(src, (void __force *)dst,
len, isum, NULL, errp);
clac();
return ret;
}
EXPORT_SYMBOL(csum_and_copy_to_user);
/**
* csum_partial_copy_nocheck - Copy and checksum.
* @src: source address
* @dst: destination address
* @len: number of bytes to be copied.
* @sum: initial sum that is added into the result (32bit unfolded)
*
* Returns an 32bit unfolded checksum of the buffer.
*/
__wsum
csum_partial_copy_nocheck(const void *src, void *dst, int len, __wsum sum)
{
return csum_partial_copy_generic(src, dst, len, sum, NULL, NULL);
}
EXPORT_SYMBOL(csum_partial_copy_nocheck);
__sum16 csum_ipv6_magic(const struct in6_addr *saddr,
const struct in6_addr *daddr,
__u32 len, __u8 proto, __wsum sum)
{
__u64 rest, sum64;
rest = (__force __u64)htonl(len) + (__force __u64)htons(proto) +
(__force __u64)sum;
asm(" addq (%[saddr]),%[sum]\n"
" adcq 8(%[saddr]),%[sum]\n"
" adcq (%[daddr]),%[sum]\n"
" adcq 8(%[daddr]),%[sum]\n"
" adcq $0,%[sum]\n"
: [sum] "=r" (sum64)
: "[sum]" (rest), [saddr] "r" (saddr), [daddr] "r" (daddr));
return csum_fold(
(__force __wsum)add32_with_carry(sum64 & 0xffffffff, sum64>>32));
}
EXPORT_SYMBOL(csum_ipv6_magic);