WSL2-Linux-Kernel/drivers/power/reset/Makefile

obj-$(CONFIG_POWER_RESET_AS3722) += as3722-poweroff.o
obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o
obj-$(CONFIG_POWER_RESET_VEXPRESS) += vexpress-poweroff.o
obj-$(CONFIG_POWER_RESET_XGENE) += xgene-reboot.o
power: reset: Add as3722 power-off driver ams AS3722 supports the power off functionality to turn off system. This commit adds power off driver for ams AS3722. Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org> 2013-12-20 17:24:00 +04:00			`obj-$(CONFIG_POWER_RESET_AS3722) += as3722-poweroff.o`
power: Add simple poweroff-gpio driver Given appropriate devicetree bindings, this driver registers a pm_power_off function to set a GPIO line high/low to power down your board. Signed-off-by: Jamie Lentin <jm@lentin.co.uk> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by:Simon Baatz <gmbnomis@gmail.com> Signed-off-by: Jason Cooper <jason@lakedaemon.net> 2012-11-17 12:51:04 +04:00			`obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o`
power: reset: Add msm restart support Add support for restart and poweroff functionality present on MSM chipsets with the MPM2 ps-hold hardware. Signed-off-by: Abhimanyu Kapur <abhimany@codeaurora.org> Tested-by: Ivan T. Ivanov <iivanov@mm-sol.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Anton Vorontsov <anton@enomsg.org> 2013-07-31 04:05:28 +04:00			`obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o`
power/reset: Add a new driver to turn QNAP board power off The QNAP NAS boxes have a microcontroller attached to the SoCs second serial port. By sending it a simple command, it will turn the power for the board off. This driver registers a function for pm_power_off to send such a command. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Anton Vorontsov <anton@enomsg.org> 2012-12-28 16:25:09 +04:00			`obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o`
arm: vexpress: Move the poweroff/restart code to drivers/power/reset This patch moves the arch/arm/mach-vexpress/reset.c functionality to drivers/platform/reset/ and adds the necessary Kconfig wiring. Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Acked-by: Pawel Moll <pawel.moll@arm.com> 2013-01-15 15:24:14 +04:00			`obj-$(CONFIG_POWER_RESET_RESTART) += restart-poweroff.o`
			`obj-$(CONFIG_POWER_RESET_VEXPRESS) += vexpress-poweroff.o`
power: Add APM X-Gene system reboot driver Add APM X-Gene SoC system reboot driver. This driver handles only system reboot. System shutdown is board specific and can be handled by board driver or GPIO based shutdown driver. Signed-off-by: Loc Ho <lho@apm.com> Signed-off-by: Feng Kan <fkan@apm.com> Signed-off-by: Kumar Sankaran <ksankaran@apm.com> Signed-off-by: Anton Vorontsov <anton@enomsg.org> 2013-07-03 00:38:58 +04:00			`obj-$(CONFIG_POWER_RESET_XGENE) += xgene-reboot.o`