microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/nfc/Kconfig

78 строки
2.3 KiB
Plaintext
Исходник Обычный вид История

NFC: Driver for NXP Semiconductors PN544 NFC chip. Creates a new "Near Field Communication" subsystem in drivers/nfc. http://en.wikipedia.org/wiki/Near_Field_Communication is useful ;) This is a driver for the pn544 NFC device. The driver transfers ETSI messages between the device and the user space. Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 04:00:47 +03:00
#
# Near Field Communication (NFC) devices
#
NFC: add nfc subsystem core The NFC subsystem core is responsible for providing the device driver interface. It is also responsible for providing an interface to the control operations and data exchange. Signed-off-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org> Signed-off-by: Aloisio Almeida Jr <aloisio.almeida@openbossa.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-02 02:31:33 +04:00
menu "Near Field Communication (NFC) devices"
depends on NFC
NFC: Driver for NXP Semiconductors PN544 NFC chip. Creates a new "Near Field Communication" subsystem in drivers/nfc. http://en.wikipedia.org/wiki/Near_Field_Communication is useful ;) This is a driver for the pn544 NFC device. The driver transfers ETSI messages between the device and the user space. Signed-off-by: Matti J. Aaltonen <matti.j.aaltonen@nokia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 04:00:47 +03:00
NFC: pn533: add NXP pn533 nfc device driver Signed-off-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org> Signed-off-by: Aloisio Almeida Jr <aloisio.almeida@openbossa.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-02 02:31:37 +04:00
config NFC_PN533
tristate "NXP PN533 USB driver"
depends on USB
help
NXP PN533 USB driver.
This driver provides support for NFC NXP PN533 devices.
Say Y here to compile support for PN533 devices into the
kernel or say M to compile it as module (pn533).
NFC: driver for TI shared transport Signed-off-by: Ilan Elias <ilane@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-18 12:19:36 +04:00
config NFC_WILINK
tristate "Texas Instruments NFC WiLink driver"
nfc: NFC_WILINK depends on NFC_NCI nwcwilink.c uses nci_*() interfaces, so it should depend on NFC_NCI. Fixes these build errors: ERROR: "nci_register_device" [drivers/nfc/nfcwilink.ko] undefined! ERROR: "nci_allocate_device" [drivers/nfc/nfcwilink.ko] undefined! ERROR: "nci_recv_frame" [drivers/nfc/nfcwilink.ko] undefined! ERROR: "nci_free_device" [drivers/nfc/nfcwilink.ko] undefined! ERROR: "nci_unregister_device" [drivers/nfc/nfcwilink.ko] undefined! Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-21 22:02:37 +04:00
depends on TI_ST && NFC_NCI
NFC: driver for TI shared transport Signed-off-by: Ilan Elias <ilane@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-09-18 12:19:36 +04:00
help
This enables the NFC driver for Texas Instrument's BT/FM/GPS/NFC
combo devices. This makes use of shared transport line discipline
core driver to communicate with the NFC core of the combo chip.
Say Y here to compile support for Texas Instrument's NFC WiLink driver
into the kernel or say M to compile it as module.
NFC: trf7970a: Add driver with ISO/IEC 14443 Type 2 Tag Support Add a driver for the Texas Instruments TRF7970a RFID/NFC/15693 transceiver. The driver currently supports ISO/IEC 14443 Type 2 tags only (MIFARE Ultralight and Ultralight C but not Classic). CC: Erick Macias <emacias@ti.com> CC: Felipe Balbi <balbi@ti.com> Signed-off-by: Mark A. Greer <mgreer@animalcreek.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-03-10 22:56:22 +04:00
config NFC_TRF7970A
tristate "Texas Instruments TRF7970a NFC driver"
depends on SPI && NFC_DIGITAL
help
This option enables the NFC driver for Texas Instruments' TRF7970a
device. Such device supports 5 different protocols: ISO14443A,
ISO14443B, FeLiCa, ISO15693 and ISO18000-3.
Say Y here to compile support for TRF7970a into the kernel or
say M to compile it as a module. The module will be called
trf7970a.ko.
NFC: mei: Add a common mei bus API for NFC drivers This isolates the common code that is required to use an mei bus nfc device from an NFC HCI drivers. This prepares for future drivers for NFC chips connected behind an Intel Management Engine controller. The microread_mei HCI driver is also modified to use that common code. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-15 13:19:20 +04:00
config NFC_MEI_PHY
tristate "MEI bus NFC device support"
NFC: mei_phy depends on INTEL_MEI INTEL_MEI_BUS_NFC never made it upstream, so make it depend on INTEL_MEI. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-05-01 01:22:34 +04:00
depends on INTEL_MEI && NFC_HCI
NFC: mei: Add a common mei bus API for NFC drivers This isolates the common code that is required to use an mei bus nfc device from an NFC HCI drivers. This prepares for future drivers for NFC chips connected behind an Intel Management Engine controller. The microread_mei HCI driver is also modified to use that common code. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-04-15 13:19:20 +04:00
help
This adds support to use an mei bus nfc device. Select this if you
will use an HCI NFC driver for an NFC chip connected behind an
Intel's Management Engine chip.
If unsure, say N.
NFC: Add a nfc hardware simulation driver This driver declares two virtual NFC devices supporting NFC-DEP protocol. An LLCP connection can be established between them and all packets sent from one device is sent back to the other, acting as loopback devices. Once established, the LLCP link can be disconnected by disabling the target device (with rfkill, nfctool, or neard disable-adapter test script). Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-06-06 18:23:23 +04:00
config NFC_SIM
tristate "NFC hardware simulator driver"
help
This driver declares two virtual NFC devices supporting NFC-DEP
protocol. An LLCP connection can be established between them and
all packets sent from one device is sent back to the other, acting as
loopback devices.
If unsure, say N.
NFC: Sony Port-100 Series driver This adds support for the Sony NFC USB dongle RC-S380, based on the Port-100 chip. This dongle is an analog frontend and does not implement the digital layer. This driver uses the nfc_digital module which is an implementation of the NFC Digital Protocol stack. This patch is a skeleton. It only registers the dongle against the NFC digital protocol stack. All NFC digital operation functions are stubbed out. Signed-off-by: Thierry Escande <thierry.escande@linux.intel.com> Cc: Stephen Tiedemann <stephen.tiedemann@gmail.com> Tested-by: Cho, Yu-Chen <acho@suse.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2013-10-04 14:12:00 +04:00
config NFC_PORT100
tristate "Sony NFC Port-100 Series USB device support"
depends on USB
depends on NFC_DIGITAL
help
This adds support for Sony Port-100 chip based USB devices such as the
RC-S380 dongle.
If unsure, say N.
NFC: pn544: Separate the core code and the i2c one into different modules As we may need to support other physical layers, we can avoid linking the core part into each and every pn544 module. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-12-18 19:26:23 +04:00
source "drivers/nfc/pn544/Kconfig"
NFC: Initial support for Inside Secure microread Inside Secure microread is an HCI based NFC chipset. This initial support includes reader and p2p (Target and initiator) modes. Signed-off-by: Eric Lapuyade <eric.lapuyade@intel.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-12-18 17:53:53 +04:00
source "drivers/nfc/microread/Kconfig"
NFC: nfcmrvl: Initial commit for Marvell NFC driver This patch adds NFC support for Marvell 8897 NFC-over-USB chipset. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-01-07 00:58:19 +04:00
source "drivers/nfc/nfcmrvl/Kconfig"
NFC: ST21NFCA: Add driver for STMicroelectronics ST21NFCA NFC Chip Add driver for STMicroelectronics ST21NFCA NFC controller. ST21NFCA is using HCI protocol, shdlc as LLC layer & I2C as communication protocol. Adding support for Reader/Writer mode with Tag type 1/2/3/4 A & B. It is using proprietary gate 15 for ISO14443-3 such as type 1 & type 2 tags. It is using proprietary gate 14 for type F tags. ST21NFCA_DEVICE_MGNT_GATE gives access to proprietary CLF configuration. Standard gate for ISO14443-4 A (13) & B (11) are also used. ST21NFCA specific mecanism: One particular point to notice for the data handling is that frame does not contain any length value. Therefore the i2c part of this driver is managing the reception with a read length sequence until the end of frame (0x7e) is reached. In order to avoid conflict between sof & eof a mecanism called byte stuffing concist of an escape byte (0x7d) insertion before special byte (0x7e, 0x7d). The special byte is then xored with 0x20. In this driver, When data are available in the CLF, the interrupt gpio is driven to active state and triggered an interrupt. Once the i2c_master_recv start, the interrupt gpio is driven to idle state until its complete. If the frame is incomplete or data are still available, interrupts will be triggered again. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-03-25 09:51:47 +04:00
source "drivers/nfc/st21nfca/Kconfig"
NFC: st21nfcb: Add driver for STMicroelectronics ST21NFCB NFC chip Add driver for STMicroelectronics ST21NFCB NFC controller. ST21NFCB is using NCI protocol and a proprietary low level transport protocol called NDLC used on top. NDLC: The protocol defines 2 types of frame: - One type carrying NCI data (referred as DATAFRAME frames). - One type carrying protocol information used for flow control and error control mechanisms (referred as SUPERVISOR frames). After each frame transmission to the NFC controller, the device host SHALL waitfor an ACK (SUPERVISOR frame) reception before sending a new frame. The NFC controller MAY send a frame at anytime to the device host. The NFC controller MAY send a specific WAIT supervisor frame to indicate to device host that a NCI data packet has been received but that it could take significant time before the NFC controller sends an ACK and thus allows next data reception. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2014-05-26 00:35:38 +04:00
source "drivers/nfc/st21nfcb/Kconfig"
NFC: nxp-nci: Add support for NXP NCI chips Add support for NXP NCI NFC controllers such as the NPC100 or PN7150 families. Signed-off-by: Clément Perrochaud <clement.perrochaud@effinnov.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-03-09 13:12:04 +03:00
source "drivers/nfc/nxp-nci/Kconfig"
NFC: add nfc subsystem core The NFC subsystem core is responsible for providing the device driver interface. It is also responsible for providing an interface to the control operations and data exchange. Signed-off-by: Lauro Ramos Venancio <lauro.venancio@openbossa.org> Signed-off-by: Aloisio Almeida Jr <aloisio.almeida@openbossa.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-07-02 02:31:33 +04:00
endmenu