WSL2-Linux-Kernel/drivers/gpio/gpiolib-acpi.c

1228 строки
31 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0
/*
* ACPI helpers for GPIO API
*
* Copyright (C) 2012, Intel Corporation
* Authors: Mathias Nyman <mathias.nyman@linux.intel.com>
* Mika Westerberg <mika.westerberg@linux.intel.com>
*/
#include <linux/errno.h>
#include <linux/gpio/consumer.h>
#include <linux/gpio/driver.h>
#include <linux/gpio/machine.h>
#include <linux/export.h>
#include <linux/acpi.h>
#include <linux/interrupt.h>
gpio / ACPI: Add support for ACPI GPIO operation regions GPIO operation regions is a new feature introduced in ACPI 5.0 specification. This feature adds a way for platform ASL code to call back to OS GPIO driver and toggle GPIO pins. An example ASL code from Lenovo Miix 2 tablet with only relevant part listed: Device (\_SB.GPO0) { Name (AVBL, Zero) Method (_REG, 2, NotSerialized) { If (LEqual (Arg0, 0x08)) { // Marks the region available Store (Arg1, AVBL) } } OperationRegion (GPOP, GeneralPurposeIo, Zero, 0x0C) Field (GPOP, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly, "\\_SB.GPO0", 0x00, ResourceConsumer,,) { 0x003B } ), SHD3, 1, } } Device (SHUB) { Method (_PS0, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (One, \_SB.GPO0.SHD3) Sleep (0x32) } } Method (_PS3, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (Zero, \_SB.GPO0.SHD3) } } } How this works is that whenever _PS0 or _PS3 method is run (typically when SHUB device is transitioned to D0 or D3 respectively), ASL code checks if the GPIO operation region is available (\_SB.GPO0.AVBL). If it is we go and store either 0 or 1 to \_SB.GPO0.SHD3. Now, when ACPICA notices ACPI GPIO operation region access (the store above) it will call acpi_gpio_adr_space_handler() that then toggles the GPIO accordingly using standard gpiolib interfaces. Implement the support by registering GPIO operation region handlers for all GPIO devices that have an ACPI handle. First time the GPIO is used by the ASL code we make sure that the GPIO stays requested until the GPIO chip driver itself is unloaded. If we find out that the GPIO is already requested we just toggle it according to the value got from ASL code. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-14 19:58:07 +04:00
#include <linux/mutex.h>
#include <linux/pinctrl/pinctrl.h>
#include "gpiolib.h"
struct acpi_gpio_event {
struct list_head node;
acpi_handle handle;
unsigned int pin;
unsigned int irq;
struct gpio_desc *desc;
};
gpio / ACPI: Add support for ACPI GPIO operation regions GPIO operation regions is a new feature introduced in ACPI 5.0 specification. This feature adds a way for platform ASL code to call back to OS GPIO driver and toggle GPIO pins. An example ASL code from Lenovo Miix 2 tablet with only relevant part listed: Device (\_SB.GPO0) { Name (AVBL, Zero) Method (_REG, 2, NotSerialized) { If (LEqual (Arg0, 0x08)) { // Marks the region available Store (Arg1, AVBL) } } OperationRegion (GPOP, GeneralPurposeIo, Zero, 0x0C) Field (GPOP, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly, "\\_SB.GPO0", 0x00, ResourceConsumer,,) { 0x003B } ), SHD3, 1, } } Device (SHUB) { Method (_PS0, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (One, \_SB.GPO0.SHD3) Sleep (0x32) } } Method (_PS3, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (Zero, \_SB.GPO0.SHD3) } } } How this works is that whenever _PS0 or _PS3 method is run (typically when SHUB device is transitioned to D0 or D3 respectively), ASL code checks if the GPIO operation region is available (\_SB.GPO0.AVBL). If it is we go and store either 0 or 1 to \_SB.GPO0.SHD3. Now, when ACPICA notices ACPI GPIO operation region access (the store above) it will call acpi_gpio_adr_space_handler() that then toggles the GPIO accordingly using standard gpiolib interfaces. Implement the support by registering GPIO operation region handlers for all GPIO devices that have an ACPI handle. First time the GPIO is used by the ASL code we make sure that the GPIO stays requested until the GPIO chip driver itself is unloaded. If we find out that the GPIO is already requested we just toggle it according to the value got from ASL code. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-14 19:58:07 +04:00
struct acpi_gpio_connection {
struct list_head node;
unsigned int pin;
gpio / ACPI: Add support for ACPI GPIO operation regions GPIO operation regions is a new feature introduced in ACPI 5.0 specification. This feature adds a way for platform ASL code to call back to OS GPIO driver and toggle GPIO pins. An example ASL code from Lenovo Miix 2 tablet with only relevant part listed: Device (\_SB.GPO0) { Name (AVBL, Zero) Method (_REG, 2, NotSerialized) { If (LEqual (Arg0, 0x08)) { // Marks the region available Store (Arg1, AVBL) } } OperationRegion (GPOP, GeneralPurposeIo, Zero, 0x0C) Field (GPOP, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly, "\\_SB.GPO0", 0x00, ResourceConsumer,,) { 0x003B } ), SHD3, 1, } } Device (SHUB) { Method (_PS0, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (One, \_SB.GPO0.SHD3) Sleep (0x32) } } Method (_PS3, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (Zero, \_SB.GPO0.SHD3) } } } How this works is that whenever _PS0 or _PS3 method is run (typically when SHUB device is transitioned to D0 or D3 respectively), ASL code checks if the GPIO operation region is available (\_SB.GPO0.AVBL). If it is we go and store either 0 or 1 to \_SB.GPO0.SHD3. Now, when ACPICA notices ACPI GPIO operation region access (the store above) it will call acpi_gpio_adr_space_handler() that then toggles the GPIO accordingly using standard gpiolib interfaces. Implement the support by registering GPIO operation region handlers for all GPIO devices that have an ACPI handle. First time the GPIO is used by the ASL code we make sure that the GPIO stays requested until the GPIO chip driver itself is unloaded. If we find out that the GPIO is already requested we just toggle it according to the value got from ASL code. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-14 19:58:07 +04:00
struct gpio_desc *desc;
};
struct acpi_gpio_chip {
gpio / ACPI: Add support for ACPI GPIO operation regions GPIO operation regions is a new feature introduced in ACPI 5.0 specification. This feature adds a way for platform ASL code to call back to OS GPIO driver and toggle GPIO pins. An example ASL code from Lenovo Miix 2 tablet with only relevant part listed: Device (\_SB.GPO0) { Name (AVBL, Zero) Method (_REG, 2, NotSerialized) { If (LEqual (Arg0, 0x08)) { // Marks the region available Store (Arg1, AVBL) } } OperationRegion (GPOP, GeneralPurposeIo, Zero, 0x0C) Field (GPOP, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly, "\\_SB.GPO0", 0x00, ResourceConsumer,,) { 0x003B } ), SHD3, 1, } } Device (SHUB) { Method (_PS0, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (One, \_SB.GPO0.SHD3) Sleep (0x32) } } Method (_PS3, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (Zero, \_SB.GPO0.SHD3) } } } How this works is that whenever _PS0 or _PS3 method is run (typically when SHUB device is transitioned to D0 or D3 respectively), ASL code checks if the GPIO operation region is available (\_SB.GPO0.AVBL). If it is we go and store either 0 or 1 to \_SB.GPO0.SHD3. Now, when ACPICA notices ACPI GPIO operation region access (the store above) it will call acpi_gpio_adr_space_handler() that then toggles the GPIO accordingly using standard gpiolib interfaces. Implement the support by registering GPIO operation region handlers for all GPIO devices that have an ACPI handle. First time the GPIO is used by the ASL code we make sure that the GPIO stays requested until the GPIO chip driver itself is unloaded. If we find out that the GPIO is already requested we just toggle it according to the value got from ASL code. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-14 19:58:07 +04:00
/*
* ACPICA requires that the first field of the context parameter
* passed to acpi_install_address_space_handler() is large enough
* to hold struct acpi_connection_info.
*/
struct acpi_connection_info conn_info;
struct list_head conns;
struct mutex conn_lock;
struct gpio_chip *chip;
struct list_head events;
struct list_head deferred_req_irqs_list_entry;
};
/*
* For gpiochips which call acpi_gpiochip_request_interrupts() before late_init
* (so builtin drivers) we register the ACPI GpioInt event handlers from a
* late_initcall_sync handler, so that other builtin drivers can register their
* OpRegions before the event handlers can run. This list contains gpiochips
* for which the acpi_gpiochip_request_interrupts() has been deferred.
*/
static DEFINE_MUTEX(acpi_gpio_deferred_req_irqs_lock);
static LIST_HEAD(acpi_gpio_deferred_req_irqs_list);
static bool acpi_gpio_deferred_req_irqs_done;
gpiolib-acpi: make sure we trigger edge events at least once on boot On some systems using edge triggered ACPI Event Interrupts, the initial state at boot is not setup by the firmware, instead relying on the edge irq event handler running at least once to setup the initial state. 2 known examples of this are: 1) The Surface 3 has its _LID state controlled by an ACPI operation region triggered by a GPIO event: OperationRegion (GPOR, GeneralPurposeIo, Zero, One) Field (GPOR, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Shared, PullNone, 0x0000, 0x0000, IoRestrictionNone, "\\_SB.GPO0", 0x00, ResourceConsumer, , ) { // Pin list 0x004C } ), HELD, 1 } Method (_E4C, 0, Serialized) // _Exx: Edge-Triggered GPE { If ((HELD == One)) { ^^LID.LIDB = One } Else { ^^LID.LIDB = Zero Notify (LID, 0x80) // Status Change } Notify (^^PCI0.SPI1.NTRG, One) // Device Check } Currently, the state of LIDB is wrong until the user actually closes or open the cover. We need to trigger the GPIO event once to update the internal ACPI state. Coincidentally, this also enables the Surface 2 integrated HID sensor hub which also requires an ACPI gpio operation region to start initialization. 2) Various Bay Trail based tablets come with an external USB mux and TI T1210B USB phy to enable USB gadget mode. The mux is controlled by a GPIO which is controlled by an edge triggered ACPI Event Interrupt which monitors the micro-USB ID pin. When the tablet is connected to a PC (or no cable is plugged in), the ID pin is high and the tablet should be in gadget mode. But the GPIO controlling the mux is initialized by the firmware so that the USB data lines are muxed to the host controller. This means that if the user wants to use gadget mode, the user needs to first plug in a host-cable to force the ID pin low and then unplug it and connect the tablet to a PC, to get the ACPI event handler to run and switch the mux to device mode, This commit fixes both by running the event-handler once on boot. Note that the running of the event-handler is done from a late_initcall, this is done because the handler AML code may rely on OperationRegions registered by other builtin drivers. This avoids errors like these: [ 0.133026] ACPI Error: No handler for Region [XSCG] ((____ptrval____)) [GenericSerialBus] (20180531/evregion-132) [ 0.133036] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20180531/exfldio-265) [ 0.133046] ACPI Error: Method parse/execution failed \_SB.GPO2._E12, AE_NOT_EXIST (20180531/psparse-516) Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> [hdegoede: Document BYT USB mux reliance on initial trigger] [hdegoede: Run event handler from a late_initcall, rather then immediately] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-12 18:25:06 +03:00
static int acpi_gpiochip_find(struct gpio_chip *gc, void *data)
{
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 11:56:26 +03:00
if (!gc->parent)
return false;
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 11:56:26 +03:00
return ACPI_HANDLE(gc->parent) == data;
}
/**
* acpi_get_gpiod() - Translate ACPI GPIO pin to GPIO descriptor usable with GPIO API
* @path: ACPI GPIO controller full path name, (e.g. "\\_SB.GPO1")
* @pin: ACPI GPIO pin number (0-based, controller-relative)
*
* Return: GPIO descriptor to use with Linux generic GPIO API, or ERR_PTR
* error value. Specifically returns %-EPROBE_DEFER if the referenced GPIO
* controller does not have gpiochip registered at the moment. This is to
* support probe deferral.
*/
static struct gpio_desc *acpi_get_gpiod(char *path, int pin)
{
struct gpio_chip *chip;
acpi_handle handle;
acpi_status status;
status = acpi_get_handle(NULL, path, &handle);
if (ACPI_FAILURE(status))
return ERR_PTR(-ENODEV);
chip = gpiochip_find(handle, acpi_gpiochip_find);
if (!chip)
return ERR_PTR(-EPROBE_DEFER);
gpio / ACPI: Drop unnecessary ACPI GPIO to Linux GPIO translation We added acpi_gpiochip_pin_to_gpio_offset() because there was a need to translate from ACPI GpioIo/GpioInt number to Linux GPIO number in the Cherryview pinctrl driver. This translation is necessary because Cherryview has gaps in the pin list and the driver used continuous GPIO number space in Linux side as follows: created GPIO range 0->7 ==> INT33FF:03 PIN 0->7 created GPIO range 8->19 ==> INT33FF:03 PIN 15->26 created GPIO range 20->25 ==> INT33FF:03 PIN 30->35 created GPIO range 26->33 ==> INT33FF:03 PIN 45->52 created GPIO range 34->43 ==> INT33FF:03 PIN 60->69 created GPIO range 44->54 ==> INT33FF:03 PIN 75->85 For example when ACPI GpioInt resource refers to GPIO 81 (SDMMC3_CD_B) we translate from pin 81 to the corresponding Linux GPIO number, which is 50. This number is then used when the GPIO is accessed through gpiolib. It turns out, this is not necessary at all. We can just pass 1:1 mapping between Linux GPIO numbers and pin numbers (including gaps) and the pinctrl core handles all the details automatically: created GPIO range 0->7 ==> INT33FF:03 PIN 0->7 created GPIO range 15->26 ==> INT33FF:03 PIN 15->26 created GPIO range 30->35 ==> INT33FF:03 PIN 30->35 created GPIO range 45->52 ==> INT33FF:03 PIN 45->52 created GPIO range 60->69 ==> INT33FF:03 PIN 60->69 created GPIO range 75->85 ==> INT33FF:03 PIN 75->85 Here GPIO 81 is exactly same than the hardware pin 81 (SDMMC3_CD_B). As an added bonus this simplifies both the ACPI GPIO core code and the Cherryview pinctrl driver. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-27 16:54:42 +03:00
return gpiochip_get_desc(chip, pin);
}
static irqreturn_t acpi_gpio_irq_handler(int irq, void *data)
{
struct acpi_gpio_event *event = data;
acpi_evaluate_object(event->handle, NULL, NULL, NULL);
return IRQ_HANDLED;
}
static irqreturn_t acpi_gpio_irq_handler_evt(int irq, void *data)
{
struct acpi_gpio_event *event = data;
acpi_execute_simple_method(event->handle, NULL, event->pin);
return IRQ_HANDLED;
}
static void acpi_gpio_chip_dh(acpi_handle handle, void *data)
{
/* The address of this function is used as a key. */
}
bool acpi_gpio_get_irq_resource(struct acpi_resource *ares,
struct acpi_resource_gpio **agpio)
{
struct acpi_resource_gpio *gpio;
if (ares->type != ACPI_RESOURCE_TYPE_GPIO)
return false;
gpio = &ares->data.gpio;
if (gpio->connection_type != ACPI_RESOURCE_GPIO_TYPE_INT)
return false;
*agpio = gpio;
return true;
}
EXPORT_SYMBOL_GPL(acpi_gpio_get_irq_resource);
static acpi_status acpi_gpiochip_request_interrupt(struct acpi_resource *ares,
void *context)
{
struct acpi_gpio_chip *acpi_gpio = context;
struct gpio_chip *chip = acpi_gpio->chip;
struct acpi_resource_gpio *agpio;
acpi_handle handle, evt_handle;
struct acpi_gpio_event *event;
irq_handler_t handler = NULL;
struct gpio_desc *desc;
unsigned long irqflags;
gpiolib-acpi: make sure we trigger edge events at least once on boot On some systems using edge triggered ACPI Event Interrupts, the initial state at boot is not setup by the firmware, instead relying on the edge irq event handler running at least once to setup the initial state. 2 known examples of this are: 1) The Surface 3 has its _LID state controlled by an ACPI operation region triggered by a GPIO event: OperationRegion (GPOR, GeneralPurposeIo, Zero, One) Field (GPOR, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Shared, PullNone, 0x0000, 0x0000, IoRestrictionNone, "\\_SB.GPO0", 0x00, ResourceConsumer, , ) { // Pin list 0x004C } ), HELD, 1 } Method (_E4C, 0, Serialized) // _Exx: Edge-Triggered GPE { If ((HELD == One)) { ^^LID.LIDB = One } Else { ^^LID.LIDB = Zero Notify (LID, 0x80) // Status Change } Notify (^^PCI0.SPI1.NTRG, One) // Device Check } Currently, the state of LIDB is wrong until the user actually closes or open the cover. We need to trigger the GPIO event once to update the internal ACPI state. Coincidentally, this also enables the Surface 2 integrated HID sensor hub which also requires an ACPI gpio operation region to start initialization. 2) Various Bay Trail based tablets come with an external USB mux and TI T1210B USB phy to enable USB gadget mode. The mux is controlled by a GPIO which is controlled by an edge triggered ACPI Event Interrupt which monitors the micro-USB ID pin. When the tablet is connected to a PC (or no cable is plugged in), the ID pin is high and the tablet should be in gadget mode. But the GPIO controlling the mux is initialized by the firmware so that the USB data lines are muxed to the host controller. This means that if the user wants to use gadget mode, the user needs to first plug in a host-cable to force the ID pin low and then unplug it and connect the tablet to a PC, to get the ACPI event handler to run and switch the mux to device mode, This commit fixes both by running the event-handler once on boot. Note that the running of the event-handler is done from a late_initcall, this is done because the handler AML code may rely on OperationRegions registered by other builtin drivers. This avoids errors like these: [ 0.133026] ACPI Error: No handler for Region [XSCG] ((____ptrval____)) [GenericSerialBus] (20180531/evregion-132) [ 0.133036] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20180531/exfldio-265) [ 0.133046] ACPI Error: Method parse/execution failed \_SB.GPO2._E12, AE_NOT_EXIST (20180531/psparse-516) Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> [hdegoede: Document BYT USB mux reliance on initial trigger] [hdegoede: Run event handler from a late_initcall, rather then immediately] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-12 18:25:06 +03:00
int ret, pin, irq, value;
if (!acpi_gpio_get_irq_resource(ares, &agpio))
return AE_OK;
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 11:56:26 +03:00
handle = ACPI_HANDLE(chip->parent);
pin = agpio->pin_table[0];
if (pin <= 255) {
char ev_name[5];
sprintf(ev_name, "_%c%02hhX",
agpio->triggering == ACPI_EDGE_SENSITIVE ? 'E' : 'L',
pin);
if (ACPI_SUCCESS(acpi_get_handle(handle, ev_name, &evt_handle)))
handler = acpi_gpio_irq_handler;
}
if (!handler) {
if (ACPI_SUCCESS(acpi_get_handle(handle, "_EVT", &evt_handle)))
handler = acpi_gpio_irq_handler_evt;
}
if (!handler)
return AE_OK;
desc = gpiochip_request_own_desc(chip, pin, "ACPI:Event");
if (IS_ERR(desc)) {
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 11:56:26 +03:00
dev_err(chip->parent, "Failed to request GPIO\n");
return AE_ERROR;
}
gpiod_direction_input(desc);
value = gpiod_get_value_cansleep(desc);
gpiolib-acpi: make sure we trigger edge events at least once on boot On some systems using edge triggered ACPI Event Interrupts, the initial state at boot is not setup by the firmware, instead relying on the edge irq event handler running at least once to setup the initial state. 2 known examples of this are: 1) The Surface 3 has its _LID state controlled by an ACPI operation region triggered by a GPIO event: OperationRegion (GPOR, GeneralPurposeIo, Zero, One) Field (GPOR, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Shared, PullNone, 0x0000, 0x0000, IoRestrictionNone, "\\_SB.GPO0", 0x00, ResourceConsumer, , ) { // Pin list 0x004C } ), HELD, 1 } Method (_E4C, 0, Serialized) // _Exx: Edge-Triggered GPE { If ((HELD == One)) { ^^LID.LIDB = One } Else { ^^LID.LIDB = Zero Notify (LID, 0x80) // Status Change } Notify (^^PCI0.SPI1.NTRG, One) // Device Check } Currently, the state of LIDB is wrong until the user actually closes or open the cover. We need to trigger the GPIO event once to update the internal ACPI state. Coincidentally, this also enables the Surface 2 integrated HID sensor hub which also requires an ACPI gpio operation region to start initialization. 2) Various Bay Trail based tablets come with an external USB mux and TI T1210B USB phy to enable USB gadget mode. The mux is controlled by a GPIO which is controlled by an edge triggered ACPI Event Interrupt which monitors the micro-USB ID pin. When the tablet is connected to a PC (or no cable is plugged in), the ID pin is high and the tablet should be in gadget mode. But the GPIO controlling the mux is initialized by the firmware so that the USB data lines are muxed to the host controller. This means that if the user wants to use gadget mode, the user needs to first plug in a host-cable to force the ID pin low and then unplug it and connect the tablet to a PC, to get the ACPI event handler to run and switch the mux to device mode, This commit fixes both by running the event-handler once on boot. Note that the running of the event-handler is done from a late_initcall, this is done because the handler AML code may rely on OperationRegions registered by other builtin drivers. This avoids errors like these: [ 0.133026] ACPI Error: No handler for Region [XSCG] ((____ptrval____)) [GenericSerialBus] (20180531/evregion-132) [ 0.133036] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20180531/exfldio-265) [ 0.133046] ACPI Error: Method parse/execution failed \_SB.GPO2._E12, AE_NOT_EXIST (20180531/psparse-516) Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> [hdegoede: Document BYT USB mux reliance on initial trigger] [hdegoede: Run event handler from a late_initcall, rather then immediately] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-12 18:25:06 +03:00
ret = gpiochip_lock_as_irq(chip, pin);
if (ret) {
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 11:56:26 +03:00
dev_err(chip->parent, "Failed to lock GPIO as interrupt\n");
goto fail_free_desc;
}
irq = gpiod_to_irq(desc);
if (irq < 0) {
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 11:56:26 +03:00
dev_err(chip->parent, "Failed to translate GPIO to IRQ\n");
goto fail_unlock_irq;
}
irqflags = IRQF_ONESHOT;
if (agpio->triggering == ACPI_LEVEL_SENSITIVE) {
if (agpio->polarity == ACPI_ACTIVE_HIGH)
irqflags |= IRQF_TRIGGER_HIGH;
else
irqflags |= IRQF_TRIGGER_LOW;
} else {
switch (agpio->polarity) {
case ACPI_ACTIVE_HIGH:
irqflags |= IRQF_TRIGGER_RISING;
break;
case ACPI_ACTIVE_LOW:
irqflags |= IRQF_TRIGGER_FALLING;
break;
default:
irqflags |= IRQF_TRIGGER_RISING |
IRQF_TRIGGER_FALLING;
break;
}
}
event = kzalloc(sizeof(*event), GFP_KERNEL);
if (!event)
goto fail_unlock_irq;
event->handle = evt_handle;
event->irq = irq;
event->pin = pin;
event->desc = desc;
ret = request_threaded_irq(event->irq, NULL, handler, irqflags,
"ACPI:Event", event);
if (ret) {
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 11:56:26 +03:00
dev_err(chip->parent,
"Failed to setup interrupt handler for %d\n",
event->irq);
goto fail_free_event;
}
if (agpio->wake_capable == ACPI_WAKE_CAPABLE)
enable_irq_wake(irq);
list_add_tail(&event->node, &acpi_gpio->events);
gpiolib-acpi: make sure we trigger edge events at least once on boot On some systems using edge triggered ACPI Event Interrupts, the initial state at boot is not setup by the firmware, instead relying on the edge irq event handler running at least once to setup the initial state. 2 known examples of this are: 1) The Surface 3 has its _LID state controlled by an ACPI operation region triggered by a GPIO event: OperationRegion (GPOR, GeneralPurposeIo, Zero, One) Field (GPOR, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Shared, PullNone, 0x0000, 0x0000, IoRestrictionNone, "\\_SB.GPO0", 0x00, ResourceConsumer, , ) { // Pin list 0x004C } ), HELD, 1 } Method (_E4C, 0, Serialized) // _Exx: Edge-Triggered GPE { If ((HELD == One)) { ^^LID.LIDB = One } Else { ^^LID.LIDB = Zero Notify (LID, 0x80) // Status Change } Notify (^^PCI0.SPI1.NTRG, One) // Device Check } Currently, the state of LIDB is wrong until the user actually closes or open the cover. We need to trigger the GPIO event once to update the internal ACPI state. Coincidentally, this also enables the Surface 2 integrated HID sensor hub which also requires an ACPI gpio operation region to start initialization. 2) Various Bay Trail based tablets come with an external USB mux and TI T1210B USB phy to enable USB gadget mode. The mux is controlled by a GPIO which is controlled by an edge triggered ACPI Event Interrupt which monitors the micro-USB ID pin. When the tablet is connected to a PC (or no cable is plugged in), the ID pin is high and the tablet should be in gadget mode. But the GPIO controlling the mux is initialized by the firmware so that the USB data lines are muxed to the host controller. This means that if the user wants to use gadget mode, the user needs to first plug in a host-cable to force the ID pin low and then unplug it and connect the tablet to a PC, to get the ACPI event handler to run and switch the mux to device mode, This commit fixes both by running the event-handler once on boot. Note that the running of the event-handler is done from a late_initcall, this is done because the handler AML code may rely on OperationRegions registered by other builtin drivers. This avoids errors like these: [ 0.133026] ACPI Error: No handler for Region [XSCG] ((____ptrval____)) [GenericSerialBus] (20180531/evregion-132) [ 0.133036] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20180531/exfldio-265) [ 0.133046] ACPI Error: Method parse/execution failed \_SB.GPO2._E12, AE_NOT_EXIST (20180531/psparse-516) Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> [hdegoede: Document BYT USB mux reliance on initial trigger] [hdegoede: Run event handler from a late_initcall, rather then immediately] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-12 18:25:06 +03:00
/*
* Make sure we trigger the initial state of the IRQ when using RISING
* or FALLING. Note we run the handlers on late_init, the AML code
* may refer to OperationRegions from other (builtin) drivers which
* may be probed after us.
*/
if (((irqflags & IRQF_TRIGGER_RISING) && value == 1) ||
((irqflags & IRQF_TRIGGER_FALLING) && value == 0))
handler(event->irq, event);
gpiolib-acpi: make sure we trigger edge events at least once on boot On some systems using edge triggered ACPI Event Interrupts, the initial state at boot is not setup by the firmware, instead relying on the edge irq event handler running at least once to setup the initial state. 2 known examples of this are: 1) The Surface 3 has its _LID state controlled by an ACPI operation region triggered by a GPIO event: OperationRegion (GPOR, GeneralPurposeIo, Zero, One) Field (GPOR, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Shared, PullNone, 0x0000, 0x0000, IoRestrictionNone, "\\_SB.GPO0", 0x00, ResourceConsumer, , ) { // Pin list 0x004C } ), HELD, 1 } Method (_E4C, 0, Serialized) // _Exx: Edge-Triggered GPE { If ((HELD == One)) { ^^LID.LIDB = One } Else { ^^LID.LIDB = Zero Notify (LID, 0x80) // Status Change } Notify (^^PCI0.SPI1.NTRG, One) // Device Check } Currently, the state of LIDB is wrong until the user actually closes or open the cover. We need to trigger the GPIO event once to update the internal ACPI state. Coincidentally, this also enables the Surface 2 integrated HID sensor hub which also requires an ACPI gpio operation region to start initialization. 2) Various Bay Trail based tablets come with an external USB mux and TI T1210B USB phy to enable USB gadget mode. The mux is controlled by a GPIO which is controlled by an edge triggered ACPI Event Interrupt which monitors the micro-USB ID pin. When the tablet is connected to a PC (or no cable is plugged in), the ID pin is high and the tablet should be in gadget mode. But the GPIO controlling the mux is initialized by the firmware so that the USB data lines are muxed to the host controller. This means that if the user wants to use gadget mode, the user needs to first plug in a host-cable to force the ID pin low and then unplug it and connect the tablet to a PC, to get the ACPI event handler to run and switch the mux to device mode, This commit fixes both by running the event-handler once on boot. Note that the running of the event-handler is done from a late_initcall, this is done because the handler AML code may rely on OperationRegions registered by other builtin drivers. This avoids errors like these: [ 0.133026] ACPI Error: No handler for Region [XSCG] ((____ptrval____)) [GenericSerialBus] (20180531/evregion-132) [ 0.133036] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20180531/exfldio-265) [ 0.133046] ACPI Error: Method parse/execution failed \_SB.GPO2._E12, AE_NOT_EXIST (20180531/psparse-516) Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> [hdegoede: Document BYT USB mux reliance on initial trigger] [hdegoede: Run event handler from a late_initcall, rather then immediately] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-12 18:25:06 +03:00
return AE_OK;
fail_free_event:
kfree(event);
fail_unlock_irq:
gpiochip_unlock_as_irq(chip, pin);
fail_free_desc:
gpiochip_free_own_desc(desc);
return AE_ERROR;
}
/**
* acpi_gpiochip_request_interrupts() - Register isr for gpio chip ACPI events
* @chip: GPIO chip
*
* ACPI5 platforms can use GPIO signaled ACPI events. These GPIO interrupts are
* handled by ACPI event methods which need to be called from the GPIO
* chip's interrupt handler. acpi_gpiochip_request_interrupts finds out which
* gpio pins have acpi event methods and assigns interrupt handlers that calls
* the acpi event methods for those pins.
*/
void acpi_gpiochip_request_interrupts(struct gpio_chip *chip)
{
struct acpi_gpio_chip *acpi_gpio;
acpi_handle handle;
acpi_status status;
bool defer;
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 11:56:26 +03:00
if (!chip->parent || !chip->to_irq)
return;
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 11:56:26 +03:00
handle = ACPI_HANDLE(chip->parent);
if (!handle)
return;
status = acpi_get_data(handle, acpi_gpio_chip_dh, (void **)&acpi_gpio);
if (ACPI_FAILURE(status))
return;
mutex_lock(&acpi_gpio_deferred_req_irqs_lock);
defer = !acpi_gpio_deferred_req_irqs_done;
if (defer)
list_add(&acpi_gpio->deferred_req_irqs_list_entry,
&acpi_gpio_deferred_req_irqs_list);
mutex_unlock(&acpi_gpio_deferred_req_irqs_lock);
if (defer)
return;
acpi_walk_resources(handle, "_AEI",
acpi_gpiochip_request_interrupt, acpi_gpio);
}
EXPORT_SYMBOL_GPL(acpi_gpiochip_request_interrupts);
/**
* acpi_gpiochip_free_interrupts() - Free GPIO ACPI event interrupts.
* @chip: GPIO chip
*
* Free interrupts associated with GPIO ACPI event method for the given
* GPIO chip.
*/
void acpi_gpiochip_free_interrupts(struct gpio_chip *chip)
{
struct acpi_gpio_chip *acpi_gpio;
struct acpi_gpio_event *event, *ep;
acpi_handle handle;
acpi_status status;
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 11:56:26 +03:00
if (!chip->parent || !chip->to_irq)
return;
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 11:56:26 +03:00
handle = ACPI_HANDLE(chip->parent);
if (!handle)
return;
status = acpi_get_data(handle, acpi_gpio_chip_dh, (void **)&acpi_gpio);
if (ACPI_FAILURE(status))
return;
mutex_lock(&acpi_gpio_deferred_req_irqs_lock);
if (!list_empty(&acpi_gpio->deferred_req_irqs_list_entry))
list_del_init(&acpi_gpio->deferred_req_irqs_list_entry);
mutex_unlock(&acpi_gpio_deferred_req_irqs_lock);
list_for_each_entry_safe_reverse(event, ep, &acpi_gpio->events, node) {
struct gpio_desc *desc;
if (irqd_is_wakeup_set(irq_get_irq_data(event->irq)))
disable_irq_wake(event->irq);
free_irq(event->irq, event);
desc = event->desc;
if (WARN_ON(IS_ERR(desc)))
continue;
gpiochip_unlock_as_irq(chip, event->pin);
gpiochip_free_own_desc(desc);
list_del(&event->node);
kfree(event);
}
}
EXPORT_SYMBOL_GPL(acpi_gpiochip_free_interrupts);
int acpi_dev_add_driver_gpios(struct acpi_device *adev,
const struct acpi_gpio_mapping *gpios)
{
if (adev && gpios) {
adev->driver_gpios = gpios;
return 0;
}
return -EINVAL;
}
EXPORT_SYMBOL_GPL(acpi_dev_add_driver_gpios);
static void devm_acpi_dev_release_driver_gpios(struct device *dev, void *res)
{
acpi_dev_remove_driver_gpios(ACPI_COMPANION(dev));
}
int devm_acpi_dev_add_driver_gpios(struct device *dev,
const struct acpi_gpio_mapping *gpios)
{
void *res;
int ret;
res = devres_alloc(devm_acpi_dev_release_driver_gpios, 0, GFP_KERNEL);
if (!res)
return -ENOMEM;
ret = acpi_dev_add_driver_gpios(ACPI_COMPANION(dev), gpios);
if (ret) {
devres_free(res);
return ret;
}
devres_add(dev, res);
return 0;
}
EXPORT_SYMBOL_GPL(devm_acpi_dev_add_driver_gpios);
void devm_acpi_dev_remove_driver_gpios(struct device *dev)
{
WARN_ON(devres_release(dev, devm_acpi_dev_release_driver_gpios, NULL, NULL));
}
EXPORT_SYMBOL_GPL(devm_acpi_dev_remove_driver_gpios);
static bool acpi_get_driver_gpio_data(struct acpi_device *adev,
const char *name, int index,
struct fwnode_reference_args *args,
unsigned int *quirks)
{
const struct acpi_gpio_mapping *gm;
if (!adev->driver_gpios)
return false;
for (gm = adev->driver_gpios; gm->name; gm++)
if (!strcmp(name, gm->name) && gm->data && index < gm->size) {
const struct acpi_gpio_params *par = gm->data + index;
args->fwnode = acpi_fwnode_handle(adev);
args->args[0] = par->crs_entry_index;
args->args[1] = par->line_index;
args->args[2] = par->active_low;
args->nargs = 3;
*quirks = gm->quirks;
return true;
}
return false;
}
static enum gpiod_flags
acpi_gpio_to_gpiod_flags(const struct acpi_resource_gpio *agpio)
{
bool pull_up = agpio->pin_config == ACPI_PIN_CONFIG_PULLUP;
switch (agpio->io_restriction) {
case ACPI_IO_RESTRICT_INPUT:
return GPIOD_IN;
case ACPI_IO_RESTRICT_OUTPUT:
/*
* ACPI GPIO resources don't contain an initial value for the
* GPIO. Therefore we deduce that value from the pull field
* instead. If the pin is pulled up we assume default to be
* high, otherwise low.
*/
return pull_up ? GPIOD_OUT_HIGH : GPIOD_OUT_LOW;
default:
/*
* Assume that the BIOS has configured the direction and pull
* accordingly.
*/
return GPIOD_ASIS;
}
}
static int
__acpi_gpio_update_gpiod_flags(enum gpiod_flags *flags, enum gpiod_flags update)
{
int ret = 0;
/*
* Check if the BIOS has IoRestriction with explicitly set direction
* and update @flags accordingly. Otherwise use whatever caller asked
* for.
*/
if (update & GPIOD_FLAGS_BIT_DIR_SET) {
enum gpiod_flags diff = *flags ^ update;
/*
* Check if caller supplied incompatible GPIO initialization
* flags.
*
* Return %-EINVAL to notify that firmware has different
* settings and we are going to use them.
*/
if (((*flags & GPIOD_FLAGS_BIT_DIR_SET) && (diff & GPIOD_FLAGS_BIT_DIR_OUT)) ||
((*flags & GPIOD_FLAGS_BIT_DIR_OUT) && (diff & GPIOD_FLAGS_BIT_DIR_VAL)))
ret = -EINVAL;
*flags = update;
}
return ret;
}
int
acpi_gpio_update_gpiod_flags(enum gpiod_flags *flags, struct acpi_gpio_info *info)
{
struct device *dev = &info->adev->dev;
enum gpiod_flags old = *flags;
int ret;
ret = __acpi_gpio_update_gpiod_flags(&old, info->flags);
if (info->quirks & ACPI_GPIO_QUIRK_NO_IO_RESTRICTION) {
if (ret)
dev_warn(dev, FW_BUG "GPIO not in correct mode, fixing\n");
} else {
if (ret)
dev_dbg(dev, "Override GPIO initialization flags\n");
*flags = old;
}
return ret;
}
struct acpi_gpio_lookup {
struct acpi_gpio_info info;
int index;
gpio / ACPI: Add support for _DSD device properties With release of ACPI 5.1 and _DSD method we can finally name GPIOs (and other things as well) returned by _CRS. Previously we were only able to use integer index to find the corresponding GPIO, which is pretty error prone if the order changes. With _DSD we can now query GPIOs using name instead of an integer index, like the below example shows: // Bluetooth device with reset and shutdown GPIOs Device (BTH) { Name (_HID, ...) Name (_CRS, ResourceTemplate () { GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {15} GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {27, 31} }) Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"reset-gpio", Package() {^BTH, 1, 1, 0 }}, Package () {"shutdown-gpio", Package() {^BTH, 0, 0, 0 }}, } }) } The format of the supported GPIO property is: Package () { "name", Package () { ref, index, pin, active_low }} ref - The device that has _CRS containing GpioIo()/GpioInt() resources, typically this is the device itself (BTH in our case). index - Index of the GpioIo()/GpioInt() resource in _CRS starting from zero. pin - Pin in the GpioIo()/GpioInt() resource. Typically this is zero. active_low - If 1 the GPIO is marked as active_low. Since ACPI GpioIo() resource does not have field saying whether it is active low or high, the "active_low" argument can be used here. Setting it to 1 marks the GPIO as active low. In our Bluetooth example the "reset-gpio" refers to the second GpioIo() resource, second pin in that resource with the GPIO number of 31. This patch implements necessary support to gpiolib for extracting GPIOs using _DSD device properties. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-29 17:41:01 +03:00
int pin_index;
bool active_low;
struct gpio_desc *desc;
int n;
};
static int acpi_populate_gpio_lookup(struct acpi_resource *ares, void *data)
{
struct acpi_gpio_lookup *lookup = data;
if (ares->type != ACPI_RESOURCE_TYPE_GPIO)
return 1;
if (lookup->n++ == lookup->index && !lookup->desc) {
const struct acpi_resource_gpio *agpio = &ares->data.gpio;
gpio / ACPI: Add support for _DSD device properties With release of ACPI 5.1 and _DSD method we can finally name GPIOs (and other things as well) returned by _CRS. Previously we were only able to use integer index to find the corresponding GPIO, which is pretty error prone if the order changes. With _DSD we can now query GPIOs using name instead of an integer index, like the below example shows: // Bluetooth device with reset and shutdown GPIOs Device (BTH) { Name (_HID, ...) Name (_CRS, ResourceTemplate () { GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {15} GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {27, 31} }) Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"reset-gpio", Package() {^BTH, 1, 1, 0 }}, Package () {"shutdown-gpio", Package() {^BTH, 0, 0, 0 }}, } }) } The format of the supported GPIO property is: Package () { "name", Package () { ref, index, pin, active_low }} ref - The device that has _CRS containing GpioIo()/GpioInt() resources, typically this is the device itself (BTH in our case). index - Index of the GpioIo()/GpioInt() resource in _CRS starting from zero. pin - Pin in the GpioIo()/GpioInt() resource. Typically this is zero. active_low - If 1 the GPIO is marked as active_low. Since ACPI GpioIo() resource does not have field saying whether it is active low or high, the "active_low" argument can be used here. Setting it to 1 marks the GPIO as active low. In our Bluetooth example the "reset-gpio" refers to the second GpioIo() resource, second pin in that resource with the GPIO number of 31. This patch implements necessary support to gpiolib for extracting GPIOs using _DSD device properties. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-29 17:41:01 +03:00
int pin_index = lookup->pin_index;
if (pin_index >= agpio->pin_table_length)
return 1;
lookup->desc = acpi_get_gpiod(agpio->resource_source.string_ptr,
gpio / ACPI: Add support for _DSD device properties With release of ACPI 5.1 and _DSD method we can finally name GPIOs (and other things as well) returned by _CRS. Previously we were only able to use integer index to find the corresponding GPIO, which is pretty error prone if the order changes. With _DSD we can now query GPIOs using name instead of an integer index, like the below example shows: // Bluetooth device with reset and shutdown GPIOs Device (BTH) { Name (_HID, ...) Name (_CRS, ResourceTemplate () { GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {15} GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {27, 31} }) Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"reset-gpio", Package() {^BTH, 1, 1, 0 }}, Package () {"shutdown-gpio", Package() {^BTH, 0, 0, 0 }}, } }) } The format of the supported GPIO property is: Package () { "name", Package () { ref, index, pin, active_low }} ref - The device that has _CRS containing GpioIo()/GpioInt() resources, typically this is the device itself (BTH in our case). index - Index of the GpioIo()/GpioInt() resource in _CRS starting from zero. pin - Pin in the GpioIo()/GpioInt() resource. Typically this is zero. active_low - If 1 the GPIO is marked as active_low. Since ACPI GpioIo() resource does not have field saying whether it is active low or high, the "active_low" argument can be used here. Setting it to 1 marks the GPIO as active low. In our Bluetooth example the "reset-gpio" refers to the second GpioIo() resource, second pin in that resource with the GPIO number of 31. This patch implements necessary support to gpiolib for extracting GPIOs using _DSD device properties. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-29 17:41:01 +03:00
agpio->pin_table[pin_index]);
lookup->info.gpioint =
agpio->connection_type == ACPI_RESOURCE_GPIO_TYPE_INT;
gpio / ACPI: Add support for _DSD device properties With release of ACPI 5.1 and _DSD method we can finally name GPIOs (and other things as well) returned by _CRS. Previously we were only able to use integer index to find the corresponding GPIO, which is pretty error prone if the order changes. With _DSD we can now query GPIOs using name instead of an integer index, like the below example shows: // Bluetooth device with reset and shutdown GPIOs Device (BTH) { Name (_HID, ...) Name (_CRS, ResourceTemplate () { GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {15} GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {27, 31} }) Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"reset-gpio", Package() {^BTH, 1, 1, 0 }}, Package () {"shutdown-gpio", Package() {^BTH, 0, 0, 0 }}, } }) } The format of the supported GPIO property is: Package () { "name", Package () { ref, index, pin, active_low }} ref - The device that has _CRS containing GpioIo()/GpioInt() resources, typically this is the device itself (BTH in our case). index - Index of the GpioIo()/GpioInt() resource in _CRS starting from zero. pin - Pin in the GpioIo()/GpioInt() resource. Typically this is zero. active_low - If 1 the GPIO is marked as active_low. Since ACPI GpioIo() resource does not have field saying whether it is active low or high, the "active_low" argument can be used here. Setting it to 1 marks the GPIO as active low. In our Bluetooth example the "reset-gpio" refers to the second GpioIo() resource, second pin in that resource with the GPIO number of 31. This patch implements necessary support to gpiolib for extracting GPIOs using _DSD device properties. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-29 17:41:01 +03:00
/*
* Polarity and triggering are only specified for GpioInt
* resource.
* Note: we expect here:
* - ACPI_ACTIVE_LOW == GPIO_ACTIVE_LOW
* - ACPI_ACTIVE_HIGH == GPIO_ACTIVE_HIGH
gpio / ACPI: Add support for _DSD device properties With release of ACPI 5.1 and _DSD method we can finally name GPIOs (and other things as well) returned by _CRS. Previously we were only able to use integer index to find the corresponding GPIO, which is pretty error prone if the order changes. With _DSD we can now query GPIOs using name instead of an integer index, like the below example shows: // Bluetooth device with reset and shutdown GPIOs Device (BTH) { Name (_HID, ...) Name (_CRS, ResourceTemplate () { GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {15} GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {27, 31} }) Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"reset-gpio", Package() {^BTH, 1, 1, 0 }}, Package () {"shutdown-gpio", Package() {^BTH, 0, 0, 0 }}, } }) } The format of the supported GPIO property is: Package () { "name", Package () { ref, index, pin, active_low }} ref - The device that has _CRS containing GpioIo()/GpioInt() resources, typically this is the device itself (BTH in our case). index - Index of the GpioIo()/GpioInt() resource in _CRS starting from zero. pin - Pin in the GpioIo()/GpioInt() resource. Typically this is zero. active_low - If 1 the GPIO is marked as active_low. Since ACPI GpioIo() resource does not have field saying whether it is active low or high, the "active_low" argument can be used here. Setting it to 1 marks the GPIO as active low. In our Bluetooth example the "reset-gpio" refers to the second GpioIo() resource, second pin in that resource with the GPIO number of 31. This patch implements necessary support to gpiolib for extracting GPIOs using _DSD device properties. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-29 17:41:01 +03:00
*/
if (lookup->info.gpioint) {
lookup->info.flags = GPIOD_IN;
lookup->info.polarity = agpio->polarity;
lookup->info.triggering = agpio->triggering;
} else {
lookup->info.flags = acpi_gpio_to_gpiod_flags(agpio);
lookup->info.polarity = lookup->active_low;
}
}
return 1;
}
static int acpi_gpio_resource_lookup(struct acpi_gpio_lookup *lookup,
struct acpi_gpio_info *info)
{
struct acpi_device *adev = lookup->info.adev;
struct list_head res_list;
int ret;
INIT_LIST_HEAD(&res_list);
ret = acpi_dev_get_resources(adev, &res_list,
acpi_populate_gpio_lookup,
lookup);
if (ret < 0)
return ret;
acpi_dev_free_resource_list(&res_list);
if (!lookup->desc)
return -ENOENT;
if (info)
*info = lookup->info;
return 0;
}
static int acpi_gpio_property_lookup(struct fwnode_handle *fwnode,
const char *propname, int index,
struct acpi_gpio_lookup *lookup)
{
struct fwnode_reference_args args;
unsigned int quirks = 0;
int ret;
memset(&args, 0, sizeof(args));
ret = __acpi_node_get_property_reference(fwnode, propname, index, 3,
&args);
if (ret) {
struct acpi_device *adev = to_acpi_device_node(fwnode);
if (!adev)
return ret;
if (!acpi_get_driver_gpio_data(adev, propname, index, &args,
&quirks))
return ret;
}
/*
* The property was found and resolved, so need to lookup the GPIO based
* on returned args.
*/
if (!to_acpi_device_node(args.fwnode))
return -EINVAL;
if (args.nargs != 3)
return -EPROTO;
lookup->index = args.args[0];
lookup->pin_index = args.args[1];
lookup->active_low = !!args.args[2];
lookup->info.adev = to_acpi_device_node(args.fwnode);
lookup->info.quirks = quirks;
return 0;
}
/**
* acpi_get_gpiod_by_index() - get a GPIO descriptor from device resources
gpio / ACPI: Add support for _DSD device properties With release of ACPI 5.1 and _DSD method we can finally name GPIOs (and other things as well) returned by _CRS. Previously we were only able to use integer index to find the corresponding GPIO, which is pretty error prone if the order changes. With _DSD we can now query GPIOs using name instead of an integer index, like the below example shows: // Bluetooth device with reset and shutdown GPIOs Device (BTH) { Name (_HID, ...) Name (_CRS, ResourceTemplate () { GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {15} GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {27, 31} }) Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"reset-gpio", Package() {^BTH, 1, 1, 0 }}, Package () {"shutdown-gpio", Package() {^BTH, 0, 0, 0 }}, } }) } The format of the supported GPIO property is: Package () { "name", Package () { ref, index, pin, active_low }} ref - The device that has _CRS containing GpioIo()/GpioInt() resources, typically this is the device itself (BTH in our case). index - Index of the GpioIo()/GpioInt() resource in _CRS starting from zero. pin - Pin in the GpioIo()/GpioInt() resource. Typically this is zero. active_low - If 1 the GPIO is marked as active_low. Since ACPI GpioIo() resource does not have field saying whether it is active low or high, the "active_low" argument can be used here. Setting it to 1 marks the GPIO as active low. In our Bluetooth example the "reset-gpio" refers to the second GpioIo() resource, second pin in that resource with the GPIO number of 31. This patch implements necessary support to gpiolib for extracting GPIOs using _DSD device properties. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-29 17:41:01 +03:00
* @adev: pointer to a ACPI device to get GPIO from
* @propname: Property name of the GPIO (optional)
* @index: index of GpioIo/GpioInt resource (starting from %0)
* @info: info pointer to fill in (optional)
*
gpio / ACPI: Add support for _DSD device properties With release of ACPI 5.1 and _DSD method we can finally name GPIOs (and other things as well) returned by _CRS. Previously we were only able to use integer index to find the corresponding GPIO, which is pretty error prone if the order changes. With _DSD we can now query GPIOs using name instead of an integer index, like the below example shows: // Bluetooth device with reset and shutdown GPIOs Device (BTH) { Name (_HID, ...) Name (_CRS, ResourceTemplate () { GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {15} GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {27, 31} }) Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"reset-gpio", Package() {^BTH, 1, 1, 0 }}, Package () {"shutdown-gpio", Package() {^BTH, 0, 0, 0 }}, } }) } The format of the supported GPIO property is: Package () { "name", Package () { ref, index, pin, active_low }} ref - The device that has _CRS containing GpioIo()/GpioInt() resources, typically this is the device itself (BTH in our case). index - Index of the GpioIo()/GpioInt() resource in _CRS starting from zero. pin - Pin in the GpioIo()/GpioInt() resource. Typically this is zero. active_low - If 1 the GPIO is marked as active_low. Since ACPI GpioIo() resource does not have field saying whether it is active low or high, the "active_low" argument can be used here. Setting it to 1 marks the GPIO as active low. In our Bluetooth example the "reset-gpio" refers to the second GpioIo() resource, second pin in that resource with the GPIO number of 31. This patch implements necessary support to gpiolib for extracting GPIOs using _DSD device properties. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-29 17:41:01 +03:00
* Function goes through ACPI resources for @adev and based on @index looks
* up a GpioIo/GpioInt resource, translates it to the Linux GPIO descriptor,
* and returns it. @index matches GpioIo/GpioInt resources only so if there
* are total %3 GPIO resources, the index goes from %0 to %2.
*
gpio / ACPI: Add support for _DSD device properties With release of ACPI 5.1 and _DSD method we can finally name GPIOs (and other things as well) returned by _CRS. Previously we were only able to use integer index to find the corresponding GPIO, which is pretty error prone if the order changes. With _DSD we can now query GPIOs using name instead of an integer index, like the below example shows: // Bluetooth device with reset and shutdown GPIOs Device (BTH) { Name (_HID, ...) Name (_CRS, ResourceTemplate () { GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {15} GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {27, 31} }) Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"reset-gpio", Package() {^BTH, 1, 1, 0 }}, Package () {"shutdown-gpio", Package() {^BTH, 0, 0, 0 }}, } }) } The format of the supported GPIO property is: Package () { "name", Package () { ref, index, pin, active_low }} ref - The device that has _CRS containing GpioIo()/GpioInt() resources, typically this is the device itself (BTH in our case). index - Index of the GpioIo()/GpioInt() resource in _CRS starting from zero. pin - Pin in the GpioIo()/GpioInt() resource. Typically this is zero. active_low - If 1 the GPIO is marked as active_low. Since ACPI GpioIo() resource does not have field saying whether it is active low or high, the "active_low" argument can be used here. Setting it to 1 marks the GPIO as active low. In our Bluetooth example the "reset-gpio" refers to the second GpioIo() resource, second pin in that resource with the GPIO number of 31. This patch implements necessary support to gpiolib for extracting GPIOs using _DSD device properties. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-29 17:41:01 +03:00
* If @propname is specified the GPIO is looked using device property. In
* that case @index is used to select the GPIO entry in the property value
* (in case of multiple).
*
* If the GPIO cannot be translated or there is an error an ERR_PTR is
* returned.
*
* Note: if the GPIO resource has multiple entries in the pin list, this
* function only returns the first.
*/
static struct gpio_desc *acpi_get_gpiod_by_index(struct acpi_device *adev,
gpio / ACPI: Add support for _DSD device properties With release of ACPI 5.1 and _DSD method we can finally name GPIOs (and other things as well) returned by _CRS. Previously we were only able to use integer index to find the corresponding GPIO, which is pretty error prone if the order changes. With _DSD we can now query GPIOs using name instead of an integer index, like the below example shows: // Bluetooth device with reset and shutdown GPIOs Device (BTH) { Name (_HID, ...) Name (_CRS, ResourceTemplate () { GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {15} GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {27, 31} }) Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"reset-gpio", Package() {^BTH, 1, 1, 0 }}, Package () {"shutdown-gpio", Package() {^BTH, 0, 0, 0 }}, } }) } The format of the supported GPIO property is: Package () { "name", Package () { ref, index, pin, active_low }} ref - The device that has _CRS containing GpioIo()/GpioInt() resources, typically this is the device itself (BTH in our case). index - Index of the GpioIo()/GpioInt() resource in _CRS starting from zero. pin - Pin in the GpioIo()/GpioInt() resource. Typically this is zero. active_low - If 1 the GPIO is marked as active_low. Since ACPI GpioIo() resource does not have field saying whether it is active low or high, the "active_low" argument can be used here. Setting it to 1 marks the GPIO as active low. In our Bluetooth example the "reset-gpio" refers to the second GpioIo() resource, second pin in that resource with the GPIO number of 31. This patch implements necessary support to gpiolib for extracting GPIOs using _DSD device properties. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-29 17:41:01 +03:00
const char *propname, int index,
struct acpi_gpio_info *info)
{
struct acpi_gpio_lookup lookup;
int ret;
gpio / ACPI: Add support for _DSD device properties With release of ACPI 5.1 and _DSD method we can finally name GPIOs (and other things as well) returned by _CRS. Previously we were only able to use integer index to find the corresponding GPIO, which is pretty error prone if the order changes. With _DSD we can now query GPIOs using name instead of an integer index, like the below example shows: // Bluetooth device with reset and shutdown GPIOs Device (BTH) { Name (_HID, ...) Name (_CRS, ResourceTemplate () { GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {15} GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {27, 31} }) Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"reset-gpio", Package() {^BTH, 1, 1, 0 }}, Package () {"shutdown-gpio", Package() {^BTH, 0, 0, 0 }}, } }) } The format of the supported GPIO property is: Package () { "name", Package () { ref, index, pin, active_low }} ref - The device that has _CRS containing GpioIo()/GpioInt() resources, typically this is the device itself (BTH in our case). index - Index of the GpioIo()/GpioInt() resource in _CRS starting from zero. pin - Pin in the GpioIo()/GpioInt() resource. Typically this is zero. active_low - If 1 the GPIO is marked as active_low. Since ACPI GpioIo() resource does not have field saying whether it is active low or high, the "active_low" argument can be used here. Setting it to 1 marks the GPIO as active low. In our Bluetooth example the "reset-gpio" refers to the second GpioIo() resource, second pin in that resource with the GPIO number of 31. This patch implements necessary support to gpiolib for extracting GPIOs using _DSD device properties. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-29 17:41:01 +03:00
if (!adev)
return ERR_PTR(-ENODEV);
memset(&lookup, 0, sizeof(lookup));
lookup.index = index;
gpio / ACPI: Add support for _DSD device properties With release of ACPI 5.1 and _DSD method we can finally name GPIOs (and other things as well) returned by _CRS. Previously we were only able to use integer index to find the corresponding GPIO, which is pretty error prone if the order changes. With _DSD we can now query GPIOs using name instead of an integer index, like the below example shows: // Bluetooth device with reset and shutdown GPIOs Device (BTH) { Name (_HID, ...) Name (_CRS, ResourceTemplate () { GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {15} GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {27, 31} }) Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"reset-gpio", Package() {^BTH, 1, 1, 0 }}, Package () {"shutdown-gpio", Package() {^BTH, 0, 0, 0 }}, } }) } The format of the supported GPIO property is: Package () { "name", Package () { ref, index, pin, active_low }} ref - The device that has _CRS containing GpioIo()/GpioInt() resources, typically this is the device itself (BTH in our case). index - Index of the GpioIo()/GpioInt() resource in _CRS starting from zero. pin - Pin in the GpioIo()/GpioInt() resource. Typically this is zero. active_low - If 1 the GPIO is marked as active_low. Since ACPI GpioIo() resource does not have field saying whether it is active low or high, the "active_low" argument can be used here. Setting it to 1 marks the GPIO as active low. In our Bluetooth example the "reset-gpio" refers to the second GpioIo() resource, second pin in that resource with the GPIO number of 31. This patch implements necessary support to gpiolib for extracting GPIOs using _DSD device properties. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-29 17:41:01 +03:00
if (propname) {
dev_dbg(&adev->dev, "GPIO: looking up %s\n", propname);
ret = acpi_gpio_property_lookup(acpi_fwnode_handle(adev),
propname, index, &lookup);
if (ret)
return ERR_PTR(ret);
gpio / ACPI: Add support for _DSD device properties With release of ACPI 5.1 and _DSD method we can finally name GPIOs (and other things as well) returned by _CRS. Previously we were only able to use integer index to find the corresponding GPIO, which is pretty error prone if the order changes. With _DSD we can now query GPIOs using name instead of an integer index, like the below example shows: // Bluetooth device with reset and shutdown GPIOs Device (BTH) { Name (_HID, ...) Name (_CRS, ResourceTemplate () { GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {15} GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {27, 31} }) Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"reset-gpio", Package() {^BTH, 1, 1, 0 }}, Package () {"shutdown-gpio", Package() {^BTH, 0, 0, 0 }}, } }) } The format of the supported GPIO property is: Package () { "name", Package () { ref, index, pin, active_low }} ref - The device that has _CRS containing GpioIo()/GpioInt() resources, typically this is the device itself (BTH in our case). index - Index of the GpioIo()/GpioInt() resource in _CRS starting from zero. pin - Pin in the GpioIo()/GpioInt() resource. Typically this is zero. active_low - If 1 the GPIO is marked as active_low. Since ACPI GpioIo() resource does not have field saying whether it is active low or high, the "active_low" argument can be used here. Setting it to 1 marks the GPIO as active low. In our Bluetooth example the "reset-gpio" refers to the second GpioIo() resource, second pin in that resource with the GPIO number of 31. This patch implements necessary support to gpiolib for extracting GPIOs using _DSD device properties. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-29 17:41:01 +03:00
dev_dbg(&adev->dev, "GPIO: _DSD returned %s %d %d %u\n",
dev_name(&lookup.info.adev->dev), lookup.index,
lookup.pin_index, lookup.active_low);
gpio / ACPI: Add support for _DSD device properties With release of ACPI 5.1 and _DSD method we can finally name GPIOs (and other things as well) returned by _CRS. Previously we were only able to use integer index to find the corresponding GPIO, which is pretty error prone if the order changes. With _DSD we can now query GPIOs using name instead of an integer index, like the below example shows: // Bluetooth device with reset and shutdown GPIOs Device (BTH) { Name (_HID, ...) Name (_CRS, ResourceTemplate () { GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {15} GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {27, 31} }) Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"reset-gpio", Package() {^BTH, 1, 1, 0 }}, Package () {"shutdown-gpio", Package() {^BTH, 0, 0, 0 }}, } }) } The format of the supported GPIO property is: Package () { "name", Package () { ref, index, pin, active_low }} ref - The device that has _CRS containing GpioIo()/GpioInt() resources, typically this is the device itself (BTH in our case). index - Index of the GpioIo()/GpioInt() resource in _CRS starting from zero. pin - Pin in the GpioIo()/GpioInt() resource. Typically this is zero. active_low - If 1 the GPIO is marked as active_low. Since ACPI GpioIo() resource does not have field saying whether it is active low or high, the "active_low" argument can be used here. Setting it to 1 marks the GPIO as active low. In our Bluetooth example the "reset-gpio" refers to the second GpioIo() resource, second pin in that resource with the GPIO number of 31. This patch implements necessary support to gpiolib for extracting GPIOs using _DSD device properties. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-29 17:41:01 +03:00
} else {
dev_dbg(&adev->dev, "GPIO: looking up %d in _CRS\n", index);
lookup.info.adev = adev;
gpio / ACPI: Add support for _DSD device properties With release of ACPI 5.1 and _DSD method we can finally name GPIOs (and other things as well) returned by _CRS. Previously we were only able to use integer index to find the corresponding GPIO, which is pretty error prone if the order changes. With _DSD we can now query GPIOs using name instead of an integer index, like the below example shows: // Bluetooth device with reset and shutdown GPIOs Device (BTH) { Name (_HID, ...) Name (_CRS, ResourceTemplate () { GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {15} GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {27, 31} }) Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"reset-gpio", Package() {^BTH, 1, 1, 0 }}, Package () {"shutdown-gpio", Package() {^BTH, 0, 0, 0 }}, } }) } The format of the supported GPIO property is: Package () { "name", Package () { ref, index, pin, active_low }} ref - The device that has _CRS containing GpioIo()/GpioInt() resources, typically this is the device itself (BTH in our case). index - Index of the GpioIo()/GpioInt() resource in _CRS starting from zero. pin - Pin in the GpioIo()/GpioInt() resource. Typically this is zero. active_low - If 1 the GPIO is marked as active_low. Since ACPI GpioIo() resource does not have field saying whether it is active low or high, the "active_low" argument can be used here. Setting it to 1 marks the GPIO as active low. In our Bluetooth example the "reset-gpio" refers to the second GpioIo() resource, second pin in that resource with the GPIO number of 31. This patch implements necessary support to gpiolib for extracting GPIOs using _DSD device properties. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Grant Likely <grant.likely@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-10-29 17:41:01 +03:00
}
ret = acpi_gpio_resource_lookup(&lookup, info);
return ret ? ERR_PTR(ret) : lookup.desc;
}
struct gpio_desc *acpi_find_gpio(struct device *dev,
const char *con_id,
unsigned int idx,
enum gpiod_flags *dflags,
enum gpio_lookup_flags *lookupflags)
{
struct acpi_device *adev = ACPI_COMPANION(dev);
struct acpi_gpio_info info;
struct gpio_desc *desc;
char propname[32];
int i;
/* Try first from _DSD */
for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) {
if (con_id) {
snprintf(propname, sizeof(propname), "%s-%s",
con_id, gpio_suffixes[i]);
} else {
snprintf(propname, sizeof(propname), "%s",
gpio_suffixes[i]);
}
desc = acpi_get_gpiod_by_index(adev, propname, idx, &info);
if (!IS_ERR(desc))
break;
if (PTR_ERR(desc) == -EPROBE_DEFER)
return ERR_CAST(desc);
}
/* Then from plain _CRS GPIOs */
if (IS_ERR(desc)) {
if (!acpi_can_fallback_to_crs(adev, con_id))
return ERR_PTR(-ENOENT);
desc = acpi_get_gpiod_by_index(adev, NULL, idx, &info);
if (IS_ERR(desc))
return desc;
}
if (info.gpioint &&
(*dflags == GPIOD_OUT_LOW || *dflags == GPIOD_OUT_HIGH)) {
dev_dbg(dev, "refusing GpioInt() entry when doing GPIOD_OUT_* lookup\n");
return ERR_PTR(-ENOENT);
}
if (info.polarity == GPIO_ACTIVE_LOW)
*lookupflags |= GPIO_ACTIVE_LOW;
acpi_gpio_update_gpiod_flags(dflags, &info);
return desc;
}
/**
* acpi_node_get_gpiod() - get a GPIO descriptor from ACPI resources
* @fwnode: pointer to an ACPI firmware node to get the GPIO information from
* @propname: Property name of the GPIO
* @index: index of GpioIo/GpioInt resource (starting from %0)
* @info: info pointer to fill in (optional)
*
* If @fwnode is an ACPI device object, call %acpi_get_gpiod_by_index() for it.
* Otherwise (ie. it is a data-only non-device object), use the property-based
* GPIO lookup to get to the GPIO resource with the relevant information and use
* that to obtain the GPIO descriptor to return.
*/
struct gpio_desc *acpi_node_get_gpiod(struct fwnode_handle *fwnode,
const char *propname, int index,
struct acpi_gpio_info *info)
{
struct acpi_gpio_lookup lookup;
struct acpi_device *adev;
int ret;
adev = to_acpi_device_node(fwnode);
if (adev)
return acpi_get_gpiod_by_index(adev, propname, index, info);
if (!is_acpi_data_node(fwnode))
return ERR_PTR(-ENODEV);
if (!propname)
return ERR_PTR(-EINVAL);
memset(&lookup, 0, sizeof(lookup));
lookup.index = index;
ret = acpi_gpio_property_lookup(fwnode, propname, index, &lookup);
if (ret)
return ERR_PTR(ret);
ret = acpi_gpio_resource_lookup(&lookup, info);
return ret ? ERR_PTR(ret) : lookup.desc;
}
/**
* acpi_dev_gpio_irq_get() - Find GpioInt and translate it to Linux IRQ number
* @adev: pointer to a ACPI device to get IRQ from
* @index: index of GpioInt resource (starting from %0)
*
* If the device has one or more GpioInt resources, this function can be
* used to translate from the GPIO offset in the resource to the Linux IRQ
* number.
*
* The function is idempotent, though each time it runs it will configure GPIO
* pin direction according to the flags in GpioInt resource.
*
* Return: Linux IRQ number (> %0) on success, negative errno on failure.
*/
int acpi_dev_gpio_irq_get(struct acpi_device *adev, int index)
{
int idx, i;
unsigned int irq_flags;
int ret;
for (i = 0, idx = 0; idx <= index; i++) {
struct acpi_gpio_info info;
struct gpio_desc *desc;
desc = acpi_get_gpiod_by_index(adev, NULL, i, &info);
/* Ignore -EPROBE_DEFER, it only matters if idx matches */
if (IS_ERR(desc) && PTR_ERR(desc) != -EPROBE_DEFER)
return PTR_ERR(desc);
if (info.gpioint && idx++ == index) {
char label[32];
int irq;
if (IS_ERR(desc))
return PTR_ERR(desc);
irq = gpiod_to_irq(desc);
if (irq < 0)
return irq;
snprintf(label, sizeof(label), "GpioInt() %d", index);
ret = gpiod_configure_flags(desc, label, 0, info.flags);
if (ret < 0)
return ret;
irq_flags = acpi_dev_get_irq_type(info.triggering,
info.polarity);
/* Set type if specified and different than the current one */
if (irq_flags != IRQ_TYPE_NONE &&
irq_flags != irq_get_trigger_type(irq))
irq_set_irq_type(irq, irq_flags);
return irq;
}
}
return -ENOENT;
}
EXPORT_SYMBOL_GPL(acpi_dev_gpio_irq_get);
gpio / ACPI: Add support for ACPI GPIO operation regions GPIO operation regions is a new feature introduced in ACPI 5.0 specification. This feature adds a way for platform ASL code to call back to OS GPIO driver and toggle GPIO pins. An example ASL code from Lenovo Miix 2 tablet with only relevant part listed: Device (\_SB.GPO0) { Name (AVBL, Zero) Method (_REG, 2, NotSerialized) { If (LEqual (Arg0, 0x08)) { // Marks the region available Store (Arg1, AVBL) } } OperationRegion (GPOP, GeneralPurposeIo, Zero, 0x0C) Field (GPOP, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly, "\\_SB.GPO0", 0x00, ResourceConsumer,,) { 0x003B } ), SHD3, 1, } } Device (SHUB) { Method (_PS0, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (One, \_SB.GPO0.SHD3) Sleep (0x32) } } Method (_PS3, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (Zero, \_SB.GPO0.SHD3) } } } How this works is that whenever _PS0 or _PS3 method is run (typically when SHUB device is transitioned to D0 or D3 respectively), ASL code checks if the GPIO operation region is available (\_SB.GPO0.AVBL). If it is we go and store either 0 or 1 to \_SB.GPO0.SHD3. Now, when ACPICA notices ACPI GPIO operation region access (the store above) it will call acpi_gpio_adr_space_handler() that then toggles the GPIO accordingly using standard gpiolib interfaces. Implement the support by registering GPIO operation region handlers for all GPIO devices that have an ACPI handle. First time the GPIO is used by the ASL code we make sure that the GPIO stays requested until the GPIO chip driver itself is unloaded. If we find out that the GPIO is already requested we just toggle it according to the value got from ASL code. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-14 19:58:07 +04:00
static acpi_status
acpi_gpio_adr_space_handler(u32 function, acpi_physical_address address,
u32 bits, u64 *value, void *handler_context,
void *region_context)
{
struct acpi_gpio_chip *achip = region_context;
struct gpio_chip *chip = achip->chip;
struct acpi_resource_gpio *agpio;
struct acpi_resource *ares;
int pin_index = (int)address;
gpio / ACPI: Add support for ACPI GPIO operation regions GPIO operation regions is a new feature introduced in ACPI 5.0 specification. This feature adds a way for platform ASL code to call back to OS GPIO driver and toggle GPIO pins. An example ASL code from Lenovo Miix 2 tablet with only relevant part listed: Device (\_SB.GPO0) { Name (AVBL, Zero) Method (_REG, 2, NotSerialized) { If (LEqual (Arg0, 0x08)) { // Marks the region available Store (Arg1, AVBL) } } OperationRegion (GPOP, GeneralPurposeIo, Zero, 0x0C) Field (GPOP, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly, "\\_SB.GPO0", 0x00, ResourceConsumer,,) { 0x003B } ), SHD3, 1, } } Device (SHUB) { Method (_PS0, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (One, \_SB.GPO0.SHD3) Sleep (0x32) } } Method (_PS3, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (Zero, \_SB.GPO0.SHD3) } } } How this works is that whenever _PS0 or _PS3 method is run (typically when SHUB device is transitioned to D0 or D3 respectively), ASL code checks if the GPIO operation region is available (\_SB.GPO0.AVBL). If it is we go and store either 0 or 1 to \_SB.GPO0.SHD3. Now, when ACPICA notices ACPI GPIO operation region access (the store above) it will call acpi_gpio_adr_space_handler() that then toggles the GPIO accordingly using standard gpiolib interfaces. Implement the support by registering GPIO operation region handlers for all GPIO devices that have an ACPI handle. First time the GPIO is used by the ASL code we make sure that the GPIO stays requested until the GPIO chip driver itself is unloaded. If we find out that the GPIO is already requested we just toggle it according to the value got from ASL code. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-14 19:58:07 +04:00
acpi_status status;
int length;
gpio / ACPI: Add support for ACPI GPIO operation regions GPIO operation regions is a new feature introduced in ACPI 5.0 specification. This feature adds a way for platform ASL code to call back to OS GPIO driver and toggle GPIO pins. An example ASL code from Lenovo Miix 2 tablet with only relevant part listed: Device (\_SB.GPO0) { Name (AVBL, Zero) Method (_REG, 2, NotSerialized) { If (LEqual (Arg0, 0x08)) { // Marks the region available Store (Arg1, AVBL) } } OperationRegion (GPOP, GeneralPurposeIo, Zero, 0x0C) Field (GPOP, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly, "\\_SB.GPO0", 0x00, ResourceConsumer,,) { 0x003B } ), SHD3, 1, } } Device (SHUB) { Method (_PS0, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (One, \_SB.GPO0.SHD3) Sleep (0x32) } } Method (_PS3, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (Zero, \_SB.GPO0.SHD3) } } } How this works is that whenever _PS0 or _PS3 method is run (typically when SHUB device is transitioned to D0 or D3 respectively), ASL code checks if the GPIO operation region is available (\_SB.GPO0.AVBL). If it is we go and store either 0 or 1 to \_SB.GPO0.SHD3. Now, when ACPICA notices ACPI GPIO operation region access (the store above) it will call acpi_gpio_adr_space_handler() that then toggles the GPIO accordingly using standard gpiolib interfaces. Implement the support by registering GPIO operation region handlers for all GPIO devices that have an ACPI handle. First time the GPIO is used by the ASL code we make sure that the GPIO stays requested until the GPIO chip driver itself is unloaded. If we find out that the GPIO is already requested we just toggle it according to the value got from ASL code. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-14 19:58:07 +04:00
int i;
status = acpi_buffer_to_resource(achip->conn_info.connection,
achip->conn_info.length, &ares);
if (ACPI_FAILURE(status))
return status;
if (WARN_ON(ares->type != ACPI_RESOURCE_TYPE_GPIO)) {
ACPI_FREE(ares);
return AE_BAD_PARAMETER;
}
agpio = &ares->data.gpio;
if (WARN_ON(agpio->io_restriction == ACPI_IO_RESTRICT_INPUT &&
function == ACPI_WRITE)) {
ACPI_FREE(ares);
return AE_BAD_PARAMETER;
}
length = min(agpio->pin_table_length, (u16)(pin_index + bits));
for (i = pin_index; i < length; ++i) {
int pin = agpio->pin_table[i];
gpio / ACPI: Add support for ACPI GPIO operation regions GPIO operation regions is a new feature introduced in ACPI 5.0 specification. This feature adds a way for platform ASL code to call back to OS GPIO driver and toggle GPIO pins. An example ASL code from Lenovo Miix 2 tablet with only relevant part listed: Device (\_SB.GPO0) { Name (AVBL, Zero) Method (_REG, 2, NotSerialized) { If (LEqual (Arg0, 0x08)) { // Marks the region available Store (Arg1, AVBL) } } OperationRegion (GPOP, GeneralPurposeIo, Zero, 0x0C) Field (GPOP, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly, "\\_SB.GPO0", 0x00, ResourceConsumer,,) { 0x003B } ), SHD3, 1, } } Device (SHUB) { Method (_PS0, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (One, \_SB.GPO0.SHD3) Sleep (0x32) } } Method (_PS3, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (Zero, \_SB.GPO0.SHD3) } } } How this works is that whenever _PS0 or _PS3 method is run (typically when SHUB device is transitioned to D0 or D3 respectively), ASL code checks if the GPIO operation region is available (\_SB.GPO0.AVBL). If it is we go and store either 0 or 1 to \_SB.GPO0.SHD3. Now, when ACPICA notices ACPI GPIO operation region access (the store above) it will call acpi_gpio_adr_space_handler() that then toggles the GPIO accordingly using standard gpiolib interfaces. Implement the support by registering GPIO operation region handlers for all GPIO devices that have an ACPI handle. First time the GPIO is used by the ASL code we make sure that the GPIO stays requested until the GPIO chip driver itself is unloaded. If we find out that the GPIO is already requested we just toggle it according to the value got from ASL code. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-14 19:58:07 +04:00
struct acpi_gpio_connection *conn;
struct gpio_desc *desc;
bool found;
mutex_lock(&achip->conn_lock);
found = false;
list_for_each_entry(conn, &achip->conns, node) {
if (conn->pin == pin) {
gpio / ACPI: Add support for ACPI GPIO operation regions GPIO operation regions is a new feature introduced in ACPI 5.0 specification. This feature adds a way for platform ASL code to call back to OS GPIO driver and toggle GPIO pins. An example ASL code from Lenovo Miix 2 tablet with only relevant part listed: Device (\_SB.GPO0) { Name (AVBL, Zero) Method (_REG, 2, NotSerialized) { If (LEqual (Arg0, 0x08)) { // Marks the region available Store (Arg1, AVBL) } } OperationRegion (GPOP, GeneralPurposeIo, Zero, 0x0C) Field (GPOP, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly, "\\_SB.GPO0", 0x00, ResourceConsumer,,) { 0x003B } ), SHD3, 1, } } Device (SHUB) { Method (_PS0, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (One, \_SB.GPO0.SHD3) Sleep (0x32) } } Method (_PS3, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (Zero, \_SB.GPO0.SHD3) } } } How this works is that whenever _PS0 or _PS3 method is run (typically when SHUB device is transitioned to D0 or D3 respectively), ASL code checks if the GPIO operation region is available (\_SB.GPO0.AVBL). If it is we go and store either 0 or 1 to \_SB.GPO0.SHD3. Now, when ACPICA notices ACPI GPIO operation region access (the store above) it will call acpi_gpio_adr_space_handler() that then toggles the GPIO accordingly using standard gpiolib interfaces. Implement the support by registering GPIO operation region handlers for all GPIO devices that have an ACPI handle. First time the GPIO is used by the ASL code we make sure that the GPIO stays requested until the GPIO chip driver itself is unloaded. If we find out that the GPIO is already requested we just toggle it according to the value got from ASL code. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-14 19:58:07 +04:00
found = true;
desc = conn->desc;
gpio / ACPI: Add support for ACPI GPIO operation regions GPIO operation regions is a new feature introduced in ACPI 5.0 specification. This feature adds a way for platform ASL code to call back to OS GPIO driver and toggle GPIO pins. An example ASL code from Lenovo Miix 2 tablet with only relevant part listed: Device (\_SB.GPO0) { Name (AVBL, Zero) Method (_REG, 2, NotSerialized) { If (LEqual (Arg0, 0x08)) { // Marks the region available Store (Arg1, AVBL) } } OperationRegion (GPOP, GeneralPurposeIo, Zero, 0x0C) Field (GPOP, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly, "\\_SB.GPO0", 0x00, ResourceConsumer,,) { 0x003B } ), SHD3, 1, } } Device (SHUB) { Method (_PS0, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (One, \_SB.GPO0.SHD3) Sleep (0x32) } } Method (_PS3, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (Zero, \_SB.GPO0.SHD3) } } } How this works is that whenever _PS0 or _PS3 method is run (typically when SHUB device is transitioned to D0 or D3 respectively), ASL code checks if the GPIO operation region is available (\_SB.GPO0.AVBL). If it is we go and store either 0 or 1 to \_SB.GPO0.SHD3. Now, when ACPICA notices ACPI GPIO operation region access (the store above) it will call acpi_gpio_adr_space_handler() that then toggles the GPIO accordingly using standard gpiolib interfaces. Implement the support by registering GPIO operation region handlers for all GPIO devices that have an ACPI handle. First time the GPIO is used by the ASL code we make sure that the GPIO stays requested until the GPIO chip driver itself is unloaded. If we find out that the GPIO is already requested we just toggle it according to the value got from ASL code. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-14 19:58:07 +04:00
break;
}
}
gpio / ACPI: Allow shared GPIO event to be read via operation region In Microsoft Surface3 the GPIO detecting lid state is shared between GPIO event and operation region. Below is simplied version of the DSDT from Surface3 including relevant parts: Scope (GPO0) { Name (_AEI, ResourceTemplate () { GpioInt (Edge, ActiveBoth, Shared, PullNone, 0x0000, "\\_SB.GPO0", 0x00, ResourceConsumer, , ) { // Pin list 0x004C } }) OperationRegion (GPOR, GeneralPurposeIo, Zero, One) Field (GPOR, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Shared, PullNone, 0x0000, 0x0000, IoRestrictionNone, "\\_SB.GPO0", 0x00, ResourceConsumer,,) { // Pin list 0x004C } ), HELD, 1 } Method (_E4C, 0, Serialized) // _Exx: Edge-Triggered GPE { If ((HELD == One)) { ^^LID.LIDB = One } Else { ^^LID.LIDB = Zero Notify (LID, 0x80) // Status Change } Notify (^^PCI0.SPI1.NTRG, One) // Device Check } } When GPIO 0x4c changes we call ASL method _E4C which tries to read HELD field (the same GPIO). This triggers following error on the console: ACPI Error: Method parse/execution failed [\_SB.GPO0._E4C] (Node ffff88013f4b4438), AE_ERROR (20150930/psparse-542) The error happens because ACPI GPIO operation region handler (acpi_gpio_adr_space_handler()) tries to acquire the very same GPIO which returns an error (-EBUSY) because the GPIO is already reserved for the GPIO event. Fix this so that we "borrow" the event GPIO if we find the GPIO belongs to an event. Allow this only for GPIOs that are read. To be able to go through acpi_gpio->events list for operation region access we need to make sure the list is properly initialized whenever GPIO chip is registered. Link: https://bugzilla.kernel.org/show_bug.cgi?id=106571 Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-30 13:02:05 +03:00
/*
* The same GPIO can be shared between operation region and
* event but only if the access here is ACPI_READ. In that
* case we "borrow" the event GPIO instead.
*/
if (!found && agpio->sharable == ACPI_SHARED &&
function == ACPI_READ) {
struct acpi_gpio_event *event;
list_for_each_entry(event, &achip->events, node) {
if (event->pin == pin) {
desc = event->desc;
found = true;
break;
}
}
}
gpio / ACPI: Add support for ACPI GPIO operation regions GPIO operation regions is a new feature introduced in ACPI 5.0 specification. This feature adds a way for platform ASL code to call back to OS GPIO driver and toggle GPIO pins. An example ASL code from Lenovo Miix 2 tablet with only relevant part listed: Device (\_SB.GPO0) { Name (AVBL, Zero) Method (_REG, 2, NotSerialized) { If (LEqual (Arg0, 0x08)) { // Marks the region available Store (Arg1, AVBL) } } OperationRegion (GPOP, GeneralPurposeIo, Zero, 0x0C) Field (GPOP, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly, "\\_SB.GPO0", 0x00, ResourceConsumer,,) { 0x003B } ), SHD3, 1, } } Device (SHUB) { Method (_PS0, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (One, \_SB.GPO0.SHD3) Sleep (0x32) } } Method (_PS3, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (Zero, \_SB.GPO0.SHD3) } } } How this works is that whenever _PS0 or _PS3 method is run (typically when SHUB device is transitioned to D0 or D3 respectively), ASL code checks if the GPIO operation region is available (\_SB.GPO0.AVBL). If it is we go and store either 0 or 1 to \_SB.GPO0.SHD3. Now, when ACPICA notices ACPI GPIO operation region access (the store above) it will call acpi_gpio_adr_space_handler() that then toggles the GPIO accordingly using standard gpiolib interfaces. Implement the support by registering GPIO operation region handlers for all GPIO devices that have an ACPI handle. First time the GPIO is used by the ASL code we make sure that the GPIO stays requested until the GPIO chip driver itself is unloaded. If we find out that the GPIO is already requested we just toggle it according to the value got from ASL code. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-14 19:58:07 +04:00
if (!found) {
enum gpiod_flags flags = acpi_gpio_to_gpiod_flags(agpio);
const char *label = "ACPI:OpRegion";
int err;
desc = gpiochip_request_own_desc(chip, pin, label);
if (IS_ERR(desc)) {
gpio / ACPI: Add support for ACPI GPIO operation regions GPIO operation regions is a new feature introduced in ACPI 5.0 specification. This feature adds a way for platform ASL code to call back to OS GPIO driver and toggle GPIO pins. An example ASL code from Lenovo Miix 2 tablet with only relevant part listed: Device (\_SB.GPO0) { Name (AVBL, Zero) Method (_REG, 2, NotSerialized) { If (LEqual (Arg0, 0x08)) { // Marks the region available Store (Arg1, AVBL) } } OperationRegion (GPOP, GeneralPurposeIo, Zero, 0x0C) Field (GPOP, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly, "\\_SB.GPO0", 0x00, ResourceConsumer,,) { 0x003B } ), SHD3, 1, } } Device (SHUB) { Method (_PS0, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (One, \_SB.GPO0.SHD3) Sleep (0x32) } } Method (_PS3, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (Zero, \_SB.GPO0.SHD3) } } } How this works is that whenever _PS0 or _PS3 method is run (typically when SHUB device is transitioned to D0 or D3 respectively), ASL code checks if the GPIO operation region is available (\_SB.GPO0.AVBL). If it is we go and store either 0 or 1 to \_SB.GPO0.SHD3. Now, when ACPICA notices ACPI GPIO operation region access (the store above) it will call acpi_gpio_adr_space_handler() that then toggles the GPIO accordingly using standard gpiolib interfaces. Implement the support by registering GPIO operation region handlers for all GPIO devices that have an ACPI handle. First time the GPIO is used by the ASL code we make sure that the GPIO stays requested until the GPIO chip driver itself is unloaded. If we find out that the GPIO is already requested we just toggle it according to the value got from ASL code. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-14 19:58:07 +04:00
status = AE_ERROR;
mutex_unlock(&achip->conn_lock);
goto out;
}
err = gpiod_configure_flags(desc, label, 0, flags);
if (err < 0) {
status = AE_NOT_CONFIGURED;
gpiochip_free_own_desc(desc);
mutex_unlock(&achip->conn_lock);
goto out;
gpio / ACPI: Add support for ACPI GPIO operation regions GPIO operation regions is a new feature introduced in ACPI 5.0 specification. This feature adds a way for platform ASL code to call back to OS GPIO driver and toggle GPIO pins. An example ASL code from Lenovo Miix 2 tablet with only relevant part listed: Device (\_SB.GPO0) { Name (AVBL, Zero) Method (_REG, 2, NotSerialized) { If (LEqual (Arg0, 0x08)) { // Marks the region available Store (Arg1, AVBL) } } OperationRegion (GPOP, GeneralPurposeIo, Zero, 0x0C) Field (GPOP, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly, "\\_SB.GPO0", 0x00, ResourceConsumer,,) { 0x003B } ), SHD3, 1, } } Device (SHUB) { Method (_PS0, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (One, \_SB.GPO0.SHD3) Sleep (0x32) } } Method (_PS3, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (Zero, \_SB.GPO0.SHD3) } } } How this works is that whenever _PS0 or _PS3 method is run (typically when SHUB device is transitioned to D0 or D3 respectively), ASL code checks if the GPIO operation region is available (\_SB.GPO0.AVBL). If it is we go and store either 0 or 1 to \_SB.GPO0.SHD3. Now, when ACPICA notices ACPI GPIO operation region access (the store above) it will call acpi_gpio_adr_space_handler() that then toggles the GPIO accordingly using standard gpiolib interfaces. Implement the support by registering GPIO operation region handlers for all GPIO devices that have an ACPI handle. First time the GPIO is used by the ASL code we make sure that the GPIO stays requested until the GPIO chip driver itself is unloaded. If we find out that the GPIO is already requested we just toggle it according to the value got from ASL code. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-14 19:58:07 +04:00
}
conn = kzalloc(sizeof(*conn), GFP_KERNEL);
if (!conn) {
status = AE_NO_MEMORY;
gpiochip_free_own_desc(desc);
mutex_unlock(&achip->conn_lock);
goto out;
}
conn->pin = pin;
gpio / ACPI: Add support for ACPI GPIO operation regions GPIO operation regions is a new feature introduced in ACPI 5.0 specification. This feature adds a way for platform ASL code to call back to OS GPIO driver and toggle GPIO pins. An example ASL code from Lenovo Miix 2 tablet with only relevant part listed: Device (\_SB.GPO0) { Name (AVBL, Zero) Method (_REG, 2, NotSerialized) { If (LEqual (Arg0, 0x08)) { // Marks the region available Store (Arg1, AVBL) } } OperationRegion (GPOP, GeneralPurposeIo, Zero, 0x0C) Field (GPOP, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly, "\\_SB.GPO0", 0x00, ResourceConsumer,,) { 0x003B } ), SHD3, 1, } } Device (SHUB) { Method (_PS0, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (One, \_SB.GPO0.SHD3) Sleep (0x32) } } Method (_PS3, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (Zero, \_SB.GPO0.SHD3) } } } How this works is that whenever _PS0 or _PS3 method is run (typically when SHUB device is transitioned to D0 or D3 respectively), ASL code checks if the GPIO operation region is available (\_SB.GPO0.AVBL). If it is we go and store either 0 or 1 to \_SB.GPO0.SHD3. Now, when ACPICA notices ACPI GPIO operation region access (the store above) it will call acpi_gpio_adr_space_handler() that then toggles the GPIO accordingly using standard gpiolib interfaces. Implement the support by registering GPIO operation region handlers for all GPIO devices that have an ACPI handle. First time the GPIO is used by the ASL code we make sure that the GPIO stays requested until the GPIO chip driver itself is unloaded. If we find out that the GPIO is already requested we just toggle it according to the value got from ASL code. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-14 19:58:07 +04:00
conn->desc = desc;
list_add_tail(&conn->node, &achip->conns);
}
mutex_unlock(&achip->conn_lock);
if (function == ACPI_WRITE)
gpiod_set_raw_value_cansleep(desc,
!!((1 << i) & *value));
gpio / ACPI: Add support for ACPI GPIO operation regions GPIO operation regions is a new feature introduced in ACPI 5.0 specification. This feature adds a way for platform ASL code to call back to OS GPIO driver and toggle GPIO pins. An example ASL code from Lenovo Miix 2 tablet with only relevant part listed: Device (\_SB.GPO0) { Name (AVBL, Zero) Method (_REG, 2, NotSerialized) { If (LEqual (Arg0, 0x08)) { // Marks the region available Store (Arg1, AVBL) } } OperationRegion (GPOP, GeneralPurposeIo, Zero, 0x0C) Field (GPOP, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly, "\\_SB.GPO0", 0x00, ResourceConsumer,,) { 0x003B } ), SHD3, 1, } } Device (SHUB) { Method (_PS0, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (One, \_SB.GPO0.SHD3) Sleep (0x32) } } Method (_PS3, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (Zero, \_SB.GPO0.SHD3) } } } How this works is that whenever _PS0 or _PS3 method is run (typically when SHUB device is transitioned to D0 or D3 respectively), ASL code checks if the GPIO operation region is available (\_SB.GPO0.AVBL). If it is we go and store either 0 or 1 to \_SB.GPO0.SHD3. Now, when ACPICA notices ACPI GPIO operation region access (the store above) it will call acpi_gpio_adr_space_handler() that then toggles the GPIO accordingly using standard gpiolib interfaces. Implement the support by registering GPIO operation region handlers for all GPIO devices that have an ACPI handle. First time the GPIO is used by the ASL code we make sure that the GPIO stays requested until the GPIO chip driver itself is unloaded. If we find out that the GPIO is already requested we just toggle it according to the value got from ASL code. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-14 19:58:07 +04:00
else
*value |= (u64)gpiod_get_raw_value_cansleep(desc) << i;
gpio / ACPI: Add support for ACPI GPIO operation regions GPIO operation regions is a new feature introduced in ACPI 5.0 specification. This feature adds a way for platform ASL code to call back to OS GPIO driver and toggle GPIO pins. An example ASL code from Lenovo Miix 2 tablet with only relevant part listed: Device (\_SB.GPO0) { Name (AVBL, Zero) Method (_REG, 2, NotSerialized) { If (LEqual (Arg0, 0x08)) { // Marks the region available Store (Arg1, AVBL) } } OperationRegion (GPOP, GeneralPurposeIo, Zero, 0x0C) Field (GPOP, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly, "\\_SB.GPO0", 0x00, ResourceConsumer,,) { 0x003B } ), SHD3, 1, } } Device (SHUB) { Method (_PS0, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (One, \_SB.GPO0.SHD3) Sleep (0x32) } } Method (_PS3, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (Zero, \_SB.GPO0.SHD3) } } } How this works is that whenever _PS0 or _PS3 method is run (typically when SHUB device is transitioned to D0 or D3 respectively), ASL code checks if the GPIO operation region is available (\_SB.GPO0.AVBL). If it is we go and store either 0 or 1 to \_SB.GPO0.SHD3. Now, when ACPICA notices ACPI GPIO operation region access (the store above) it will call acpi_gpio_adr_space_handler() that then toggles the GPIO accordingly using standard gpiolib interfaces. Implement the support by registering GPIO operation region handlers for all GPIO devices that have an ACPI handle. First time the GPIO is used by the ASL code we make sure that the GPIO stays requested until the GPIO chip driver itself is unloaded. If we find out that the GPIO is already requested we just toggle it according to the value got from ASL code. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-14 19:58:07 +04:00
}
out:
ACPI_FREE(ares);
return status;
}
static void acpi_gpiochip_request_regions(struct acpi_gpio_chip *achip)
{
struct gpio_chip *chip = achip->chip;
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 11:56:26 +03:00
acpi_handle handle = ACPI_HANDLE(chip->parent);
gpio / ACPI: Add support for ACPI GPIO operation regions GPIO operation regions is a new feature introduced in ACPI 5.0 specification. This feature adds a way for platform ASL code to call back to OS GPIO driver and toggle GPIO pins. An example ASL code from Lenovo Miix 2 tablet with only relevant part listed: Device (\_SB.GPO0) { Name (AVBL, Zero) Method (_REG, 2, NotSerialized) { If (LEqual (Arg0, 0x08)) { // Marks the region available Store (Arg1, AVBL) } } OperationRegion (GPOP, GeneralPurposeIo, Zero, 0x0C) Field (GPOP, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly, "\\_SB.GPO0", 0x00, ResourceConsumer,,) { 0x003B } ), SHD3, 1, } } Device (SHUB) { Method (_PS0, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (One, \_SB.GPO0.SHD3) Sleep (0x32) } } Method (_PS3, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (Zero, \_SB.GPO0.SHD3) } } } How this works is that whenever _PS0 or _PS3 method is run (typically when SHUB device is transitioned to D0 or D3 respectively), ASL code checks if the GPIO operation region is available (\_SB.GPO0.AVBL). If it is we go and store either 0 or 1 to \_SB.GPO0.SHD3. Now, when ACPICA notices ACPI GPIO operation region access (the store above) it will call acpi_gpio_adr_space_handler() that then toggles the GPIO accordingly using standard gpiolib interfaces. Implement the support by registering GPIO operation region handlers for all GPIO devices that have an ACPI handle. First time the GPIO is used by the ASL code we make sure that the GPIO stays requested until the GPIO chip driver itself is unloaded. If we find out that the GPIO is already requested we just toggle it according to the value got from ASL code. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-14 19:58:07 +04:00
acpi_status status;
INIT_LIST_HEAD(&achip->conns);
mutex_init(&achip->conn_lock);
status = acpi_install_address_space_handler(handle, ACPI_ADR_SPACE_GPIO,
acpi_gpio_adr_space_handler,
NULL, achip);
if (ACPI_FAILURE(status))
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 11:56:26 +03:00
dev_err(chip->parent,
"Failed to install GPIO OpRegion handler\n");
gpio / ACPI: Add support for ACPI GPIO operation regions GPIO operation regions is a new feature introduced in ACPI 5.0 specification. This feature adds a way for platform ASL code to call back to OS GPIO driver and toggle GPIO pins. An example ASL code from Lenovo Miix 2 tablet with only relevant part listed: Device (\_SB.GPO0) { Name (AVBL, Zero) Method (_REG, 2, NotSerialized) { If (LEqual (Arg0, 0x08)) { // Marks the region available Store (Arg1, AVBL) } } OperationRegion (GPOP, GeneralPurposeIo, Zero, 0x0C) Field (GPOP, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly, "\\_SB.GPO0", 0x00, ResourceConsumer,,) { 0x003B } ), SHD3, 1, } } Device (SHUB) { Method (_PS0, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (One, \_SB.GPO0.SHD3) Sleep (0x32) } } Method (_PS3, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (Zero, \_SB.GPO0.SHD3) } } } How this works is that whenever _PS0 or _PS3 method is run (typically when SHUB device is transitioned to D0 or D3 respectively), ASL code checks if the GPIO operation region is available (\_SB.GPO0.AVBL). If it is we go and store either 0 or 1 to \_SB.GPO0.SHD3. Now, when ACPICA notices ACPI GPIO operation region access (the store above) it will call acpi_gpio_adr_space_handler() that then toggles the GPIO accordingly using standard gpiolib interfaces. Implement the support by registering GPIO operation region handlers for all GPIO devices that have an ACPI handle. First time the GPIO is used by the ASL code we make sure that the GPIO stays requested until the GPIO chip driver itself is unloaded. If we find out that the GPIO is already requested we just toggle it according to the value got from ASL code. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-14 19:58:07 +04:00
}
static void acpi_gpiochip_free_regions(struct acpi_gpio_chip *achip)
{
struct gpio_chip *chip = achip->chip;
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 11:56:26 +03:00
acpi_handle handle = ACPI_HANDLE(chip->parent);
gpio / ACPI: Add support for ACPI GPIO operation regions GPIO operation regions is a new feature introduced in ACPI 5.0 specification. This feature adds a way for platform ASL code to call back to OS GPIO driver and toggle GPIO pins. An example ASL code from Lenovo Miix 2 tablet with only relevant part listed: Device (\_SB.GPO0) { Name (AVBL, Zero) Method (_REG, 2, NotSerialized) { If (LEqual (Arg0, 0x08)) { // Marks the region available Store (Arg1, AVBL) } } OperationRegion (GPOP, GeneralPurposeIo, Zero, 0x0C) Field (GPOP, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly, "\\_SB.GPO0", 0x00, ResourceConsumer,,) { 0x003B } ), SHD3, 1, } } Device (SHUB) { Method (_PS0, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (One, \_SB.GPO0.SHD3) Sleep (0x32) } } Method (_PS3, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (Zero, \_SB.GPO0.SHD3) } } } How this works is that whenever _PS0 or _PS3 method is run (typically when SHUB device is transitioned to D0 or D3 respectively), ASL code checks if the GPIO operation region is available (\_SB.GPO0.AVBL). If it is we go and store either 0 or 1 to \_SB.GPO0.SHD3. Now, when ACPICA notices ACPI GPIO operation region access (the store above) it will call acpi_gpio_adr_space_handler() that then toggles the GPIO accordingly using standard gpiolib interfaces. Implement the support by registering GPIO operation region handlers for all GPIO devices that have an ACPI handle. First time the GPIO is used by the ASL code we make sure that the GPIO stays requested until the GPIO chip driver itself is unloaded. If we find out that the GPIO is already requested we just toggle it according to the value got from ASL code. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-14 19:58:07 +04:00
struct acpi_gpio_connection *conn, *tmp;
acpi_status status;
status = acpi_remove_address_space_handler(handle, ACPI_ADR_SPACE_GPIO,
acpi_gpio_adr_space_handler);
if (ACPI_FAILURE(status)) {
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 11:56:26 +03:00
dev_err(chip->parent,
"Failed to remove GPIO OpRegion handler\n");
gpio / ACPI: Add support for ACPI GPIO operation regions GPIO operation regions is a new feature introduced in ACPI 5.0 specification. This feature adds a way for platform ASL code to call back to OS GPIO driver and toggle GPIO pins. An example ASL code from Lenovo Miix 2 tablet with only relevant part listed: Device (\_SB.GPO0) { Name (AVBL, Zero) Method (_REG, 2, NotSerialized) { If (LEqual (Arg0, 0x08)) { // Marks the region available Store (Arg1, AVBL) } } OperationRegion (GPOP, GeneralPurposeIo, Zero, 0x0C) Field (GPOP, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly, "\\_SB.GPO0", 0x00, ResourceConsumer,,) { 0x003B } ), SHD3, 1, } } Device (SHUB) { Method (_PS0, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (One, \_SB.GPO0.SHD3) Sleep (0x32) } } Method (_PS3, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (Zero, \_SB.GPO0.SHD3) } } } How this works is that whenever _PS0 or _PS3 method is run (typically when SHUB device is transitioned to D0 or D3 respectively), ASL code checks if the GPIO operation region is available (\_SB.GPO0.AVBL). If it is we go and store either 0 or 1 to \_SB.GPO0.SHD3. Now, when ACPICA notices ACPI GPIO operation region access (the store above) it will call acpi_gpio_adr_space_handler() that then toggles the GPIO accordingly using standard gpiolib interfaces. Implement the support by registering GPIO operation region handlers for all GPIO devices that have an ACPI handle. First time the GPIO is used by the ASL code we make sure that the GPIO stays requested until the GPIO chip driver itself is unloaded. If we find out that the GPIO is already requested we just toggle it according to the value got from ASL code. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-14 19:58:07 +04:00
return;
}
list_for_each_entry_safe_reverse(conn, tmp, &achip->conns, node) {
gpiochip_free_own_desc(conn->desc);
list_del(&conn->node);
kfree(conn);
}
}
static struct gpio_desc *acpi_gpiochip_parse_own_gpio(
struct acpi_gpio_chip *achip, struct fwnode_handle *fwnode,
const char **name, unsigned int *lflags, unsigned int *dflags)
{
struct gpio_chip *chip = achip->chip;
struct gpio_desc *desc;
u32 gpios[2];
int ret;
*lflags = 0;
*dflags = 0;
*name = NULL;
ret = fwnode_property_read_u32_array(fwnode, "gpios", gpios,
ARRAY_SIZE(gpios));
if (ret < 0)
return ERR_PTR(ret);
gpio / ACPI: Drop unnecessary ACPI GPIO to Linux GPIO translation We added acpi_gpiochip_pin_to_gpio_offset() because there was a need to translate from ACPI GpioIo/GpioInt number to Linux GPIO number in the Cherryview pinctrl driver. This translation is necessary because Cherryview has gaps in the pin list and the driver used continuous GPIO number space in Linux side as follows: created GPIO range 0->7 ==> INT33FF:03 PIN 0->7 created GPIO range 8->19 ==> INT33FF:03 PIN 15->26 created GPIO range 20->25 ==> INT33FF:03 PIN 30->35 created GPIO range 26->33 ==> INT33FF:03 PIN 45->52 created GPIO range 34->43 ==> INT33FF:03 PIN 60->69 created GPIO range 44->54 ==> INT33FF:03 PIN 75->85 For example when ACPI GpioInt resource refers to GPIO 81 (SDMMC3_CD_B) we translate from pin 81 to the corresponding Linux GPIO number, which is 50. This number is then used when the GPIO is accessed through gpiolib. It turns out, this is not necessary at all. We can just pass 1:1 mapping between Linux GPIO numbers and pin numbers (including gaps) and the pinctrl core handles all the details automatically: created GPIO range 0->7 ==> INT33FF:03 PIN 0->7 created GPIO range 15->26 ==> INT33FF:03 PIN 15->26 created GPIO range 30->35 ==> INT33FF:03 PIN 30->35 created GPIO range 45->52 ==> INT33FF:03 PIN 45->52 created GPIO range 60->69 ==> INT33FF:03 PIN 60->69 created GPIO range 75->85 ==> INT33FF:03 PIN 75->85 Here GPIO 81 is exactly same than the hardware pin 81 (SDMMC3_CD_B). As an added bonus this simplifies both the ACPI GPIO core code and the Cherryview pinctrl driver. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-27 16:54:42 +03:00
desc = gpiochip_get_desc(chip, gpios[0]);
if (IS_ERR(desc))
return desc;
if (gpios[1])
*lflags |= GPIO_ACTIVE_LOW;
if (fwnode_property_present(fwnode, "input"))
*dflags |= GPIOD_IN;
else if (fwnode_property_present(fwnode, "output-low"))
*dflags |= GPIOD_OUT_LOW;
else if (fwnode_property_present(fwnode, "output-high"))
*dflags |= GPIOD_OUT_HIGH;
else
return ERR_PTR(-EINVAL);
fwnode_property_read_string(fwnode, "line-name", name);
return desc;
}
static void acpi_gpiochip_scan_gpios(struct acpi_gpio_chip *achip)
{
struct gpio_chip *chip = achip->chip;
struct fwnode_handle *fwnode;
device_for_each_child_node(chip->parent, fwnode) {
unsigned int lflags, dflags;
struct gpio_desc *desc;
const char *name;
int ret;
if (!fwnode_property_present(fwnode, "gpio-hog"))
continue;
desc = acpi_gpiochip_parse_own_gpio(achip, fwnode, &name,
&lflags, &dflags);
if (IS_ERR(desc))
continue;
ret = gpiod_hog(desc, name, lflags, dflags);
if (ret) {
dev_err(chip->parent, "Failed to hog GPIO\n");
fwnode_handle_put(fwnode);
return;
}
}
}
void acpi_gpiochip_add(struct gpio_chip *chip)
{
struct acpi_gpio_chip *acpi_gpio;
acpi_handle handle;
acpi_status status;
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 11:56:26 +03:00
if (!chip || !chip->parent)
gpio / ACPI: Don't crash on NULL chip->dev Commit aa92b6f689ac (gpio / ACPI: Allocate ACPI specific data directly in acpi_gpiochip_add()) moved ACPI handle checking to acpi_gpiochip_add() but forgot to check whether chip->dev is NULL before dereferencing it. Since chip->dev pointer is optional we can end up with crash like following: BUG: unable to handle kernel NULL pointer dereference at 00000138 IP: [<c126c2b3>] acpi_gpiochip_add+0x13/0x190 *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP Modules linked in: ssb(+) ... CPU: 0 PID: 512 Comm: modprobe Tainted: G W 3.14.0-rc7-next-20140324-t1 #24 Hardware name: Dell Inc. Latitude D830 /0UY141, BIOS A02 06/07/2007 task: f5799900 ti: f543e000 task.ti: f543e000 EIP: 0060:[<c126c2b3>] EFLAGS: 00010282 CPU: 0 EIP is at acpi_gpiochip_add+0x13/0x190 EAX: 00000000 EBX: f57824c4 ECX: 00000000 EDX: 00000000 ESI: f57824c4 EDI: 00000010 EBP: f543fc54 ESP: f543fc40 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 CR0: 8005003b CR2: 00000138 CR3: 355f8000 CR4: 000007d0 Stack: f543fc5c fd1f7790 f57824c4 000000be 00000010 f543fc84 c1269f4e f543fc74 fd1f78bd 00008002 f57822b0 f5782090 fd1f8400 00000286 fd1f9994 00000000 f5782000 f543fc8c fd1f7e39 f543fcc8 fd1f0bd8 000000c0 00000000 00000000 Call Trace: [<fd1f7790>] ? ssb_pcie_mdio_write+0xa0/0xd0 [ssb] [<c1269f4e>] gpiochip_add+0xee/0x300 [<fd1f78bd>] ? ssb_pcicore_serdes_workaround+0xfd/0x140 [ssb] [<fd1f7e39>] ssb_gpio_init+0x89/0xa0 [ssb] [<fd1f0bd8>] ssb_attach_queued_buses+0xc8/0x2d0 [ssb] [<fd1f0f65>] ssb_bus_register+0x185/0x1f0 [ssb] [<fd1f3120>] ? ssb_pci_xtal+0x220/0x220 [ssb] [<fd1f106c>] ssb_bus_pcibus_register+0x2c/0x80 [ssb] [<fd1f40dc>] ssb_pcihost_probe+0x9c/0x110 [ssb] [<c1276c8f>] pci_device_probe+0x6f/0xc0 [<c11bdb55>] ? sysfs_create_link+0x25/0x40 [<c131d8b9>] driver_probe_device+0x79/0x360 [<c1276512>] ? pci_match_device+0xb2/0xc0 [<c131dc51>] __driver_attach+0x71/0x80 [<c131dbe0>] ? __device_attach+0x40/0x40 [<c131bd87>] bus_for_each_dev+0x47/0x80 [<c131d3ae>] driver_attach+0x1e/0x20 [<c131dbe0>] ? __device_attach+0x40/0x40 [<c131d007>] bus_add_driver+0x157/0x230 [<c131e219>] driver_register+0x59/0xe0 ... Fix this by checking chip->dev pointer against NULL first. Also we can now remove redundant check in acpi_gpiochip_request/free_interrupts(). Reported-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Tested-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-31 16:16:49 +04:00
return;
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 11:56:26 +03:00
handle = ACPI_HANDLE(chip->parent);
if (!handle)
return;
acpi_gpio = kzalloc(sizeof(*acpi_gpio), GFP_KERNEL);
if (!acpi_gpio) {
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 11:56:26 +03:00
dev_err(chip->parent,
"Failed to allocate memory for ACPI GPIO chip\n");
return;
}
acpi_gpio->chip = chip;
gpio / ACPI: Allow shared GPIO event to be read via operation region In Microsoft Surface3 the GPIO detecting lid state is shared between GPIO event and operation region. Below is simplied version of the DSDT from Surface3 including relevant parts: Scope (GPO0) { Name (_AEI, ResourceTemplate () { GpioInt (Edge, ActiveBoth, Shared, PullNone, 0x0000, "\\_SB.GPO0", 0x00, ResourceConsumer, , ) { // Pin list 0x004C } }) OperationRegion (GPOR, GeneralPurposeIo, Zero, One) Field (GPOR, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Shared, PullNone, 0x0000, 0x0000, IoRestrictionNone, "\\_SB.GPO0", 0x00, ResourceConsumer,,) { // Pin list 0x004C } ), HELD, 1 } Method (_E4C, 0, Serialized) // _Exx: Edge-Triggered GPE { If ((HELD == One)) { ^^LID.LIDB = One } Else { ^^LID.LIDB = Zero Notify (LID, 0x80) // Status Change } Notify (^^PCI0.SPI1.NTRG, One) // Device Check } } When GPIO 0x4c changes we call ASL method _E4C which tries to read HELD field (the same GPIO). This triggers following error on the console: ACPI Error: Method parse/execution failed [\_SB.GPO0._E4C] (Node ffff88013f4b4438), AE_ERROR (20150930/psparse-542) The error happens because ACPI GPIO operation region handler (acpi_gpio_adr_space_handler()) tries to acquire the very same GPIO which returns an error (-EBUSY) because the GPIO is already reserved for the GPIO event. Fix this so that we "borrow" the event GPIO if we find the GPIO belongs to an event. Allow this only for GPIOs that are read. To be able to go through acpi_gpio->events list for operation region access we need to make sure the list is properly initialized whenever GPIO chip is registered. Link: https://bugzilla.kernel.org/show_bug.cgi?id=106571 Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-30 13:02:05 +03:00
INIT_LIST_HEAD(&acpi_gpio->events);
INIT_LIST_HEAD(&acpi_gpio->deferred_req_irqs_list_entry);
status = acpi_attach_data(handle, acpi_gpio_chip_dh, acpi_gpio);
if (ACPI_FAILURE(status)) {
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 11:56:26 +03:00
dev_err(chip->parent, "Failed to attach ACPI GPIO chip\n");
kfree(acpi_gpio);
return;
}
if (!chip->names)
devprop_gpiochip_set_names(chip, dev_fwnode(chip->parent));
gpio / ACPI: Add support for ACPI GPIO operation regions GPIO operation regions is a new feature introduced in ACPI 5.0 specification. This feature adds a way for platform ASL code to call back to OS GPIO driver and toggle GPIO pins. An example ASL code from Lenovo Miix 2 tablet with only relevant part listed: Device (\_SB.GPO0) { Name (AVBL, Zero) Method (_REG, 2, NotSerialized) { If (LEqual (Arg0, 0x08)) { // Marks the region available Store (Arg1, AVBL) } } OperationRegion (GPOP, GeneralPurposeIo, Zero, 0x0C) Field (GPOP, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly, "\\_SB.GPO0", 0x00, ResourceConsumer,,) { 0x003B } ), SHD3, 1, } } Device (SHUB) { Method (_PS0, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (One, \_SB.GPO0.SHD3) Sleep (0x32) } } Method (_PS3, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (Zero, \_SB.GPO0.SHD3) } } } How this works is that whenever _PS0 or _PS3 method is run (typically when SHUB device is transitioned to D0 or D3 respectively), ASL code checks if the GPIO operation region is available (\_SB.GPO0.AVBL). If it is we go and store either 0 or 1 to \_SB.GPO0.SHD3. Now, when ACPICA notices ACPI GPIO operation region access (the store above) it will call acpi_gpio_adr_space_handler() that then toggles the GPIO accordingly using standard gpiolib interfaces. Implement the support by registering GPIO operation region handlers for all GPIO devices that have an ACPI handle. First time the GPIO is used by the ASL code we make sure that the GPIO stays requested until the GPIO chip driver itself is unloaded. If we find out that the GPIO is already requested we just toggle it according to the value got from ASL code. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-14 19:58:07 +04:00
acpi_gpiochip_request_regions(acpi_gpio);
acpi_gpiochip_scan_gpios(acpi_gpio);
acpi_walk_dep_device_list(handle);
}
void acpi_gpiochip_remove(struct gpio_chip *chip)
{
struct acpi_gpio_chip *acpi_gpio;
acpi_handle handle;
acpi_status status;
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 11:56:26 +03:00
if (!chip || !chip->parent)
gpio / ACPI: Don't crash on NULL chip->dev Commit aa92b6f689ac (gpio / ACPI: Allocate ACPI specific data directly in acpi_gpiochip_add()) moved ACPI handle checking to acpi_gpiochip_add() but forgot to check whether chip->dev is NULL before dereferencing it. Since chip->dev pointer is optional we can end up with crash like following: BUG: unable to handle kernel NULL pointer dereference at 00000138 IP: [<c126c2b3>] acpi_gpiochip_add+0x13/0x190 *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP Modules linked in: ssb(+) ... CPU: 0 PID: 512 Comm: modprobe Tainted: G W 3.14.0-rc7-next-20140324-t1 #24 Hardware name: Dell Inc. Latitude D830 /0UY141, BIOS A02 06/07/2007 task: f5799900 ti: f543e000 task.ti: f543e000 EIP: 0060:[<c126c2b3>] EFLAGS: 00010282 CPU: 0 EIP is at acpi_gpiochip_add+0x13/0x190 EAX: 00000000 EBX: f57824c4 ECX: 00000000 EDX: 00000000 ESI: f57824c4 EDI: 00000010 EBP: f543fc54 ESP: f543fc40 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 CR0: 8005003b CR2: 00000138 CR3: 355f8000 CR4: 000007d0 Stack: f543fc5c fd1f7790 f57824c4 000000be 00000010 f543fc84 c1269f4e f543fc74 fd1f78bd 00008002 f57822b0 f5782090 fd1f8400 00000286 fd1f9994 00000000 f5782000 f543fc8c fd1f7e39 f543fcc8 fd1f0bd8 000000c0 00000000 00000000 Call Trace: [<fd1f7790>] ? ssb_pcie_mdio_write+0xa0/0xd0 [ssb] [<c1269f4e>] gpiochip_add+0xee/0x300 [<fd1f78bd>] ? ssb_pcicore_serdes_workaround+0xfd/0x140 [ssb] [<fd1f7e39>] ssb_gpio_init+0x89/0xa0 [ssb] [<fd1f0bd8>] ssb_attach_queued_buses+0xc8/0x2d0 [ssb] [<fd1f0f65>] ssb_bus_register+0x185/0x1f0 [ssb] [<fd1f3120>] ? ssb_pci_xtal+0x220/0x220 [ssb] [<fd1f106c>] ssb_bus_pcibus_register+0x2c/0x80 [ssb] [<fd1f40dc>] ssb_pcihost_probe+0x9c/0x110 [ssb] [<c1276c8f>] pci_device_probe+0x6f/0xc0 [<c11bdb55>] ? sysfs_create_link+0x25/0x40 [<c131d8b9>] driver_probe_device+0x79/0x360 [<c1276512>] ? pci_match_device+0xb2/0xc0 [<c131dc51>] __driver_attach+0x71/0x80 [<c131dbe0>] ? __device_attach+0x40/0x40 [<c131bd87>] bus_for_each_dev+0x47/0x80 [<c131d3ae>] driver_attach+0x1e/0x20 [<c131dbe0>] ? __device_attach+0x40/0x40 [<c131d007>] bus_add_driver+0x157/0x230 [<c131e219>] driver_register+0x59/0xe0 ... Fix this by checking chip->dev pointer against NULL first. Also we can now remove redundant check in acpi_gpiochip_request/free_interrupts(). Reported-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Tested-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Tested-by: Josh Boyer <jwboyer@fedoraproject.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-31 16:16:49 +04:00
return;
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 11:56:26 +03:00
handle = ACPI_HANDLE(chip->parent);
if (!handle)
return;
status = acpi_get_data(handle, acpi_gpio_chip_dh, (void **)&acpi_gpio);
if (ACPI_FAILURE(status)) {
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 11:56:26 +03:00
dev_warn(chip->parent, "Failed to retrieve ACPI GPIO chip\n");
return;
}
gpio / ACPI: Add support for ACPI GPIO operation regions GPIO operation regions is a new feature introduced in ACPI 5.0 specification. This feature adds a way for platform ASL code to call back to OS GPIO driver and toggle GPIO pins. An example ASL code from Lenovo Miix 2 tablet with only relevant part listed: Device (\_SB.GPO0) { Name (AVBL, Zero) Method (_REG, 2, NotSerialized) { If (LEqual (Arg0, 0x08)) { // Marks the region available Store (Arg1, AVBL) } } OperationRegion (GPOP, GeneralPurposeIo, Zero, 0x0C) Field (GPOP, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Exclusive, PullDefault, 0, 0, IoRestrictionOutputOnly, "\\_SB.GPO0", 0x00, ResourceConsumer,,) { 0x003B } ), SHD3, 1, } } Device (SHUB) { Method (_PS0, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (One, \_SB.GPO0.SHD3) Sleep (0x32) } } Method (_PS3, 0, Serialized) { If (LEqual (\_SB.GPO0.AVBL, One)) { Store (Zero, \_SB.GPO0.SHD3) } } } How this works is that whenever _PS0 or _PS3 method is run (typically when SHUB device is transitioned to D0 or D3 respectively), ASL code checks if the GPIO operation region is available (\_SB.GPO0.AVBL). If it is we go and store either 0 or 1 to \_SB.GPO0.SHD3. Now, when ACPICA notices ACPI GPIO operation region access (the store above) it will call acpi_gpio_adr_space_handler() that then toggles the GPIO accordingly using standard gpiolib interfaces. Implement the support by registering GPIO operation region handlers for all GPIO devices that have an ACPI handle. First time the GPIO is used by the ASL code we make sure that the GPIO stays requested until the GPIO chip driver itself is unloaded. If we find out that the GPIO is already requested we just toggle it according to the value got from ASL code. Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-03-14 19:58:07 +04:00
acpi_gpiochip_free_regions(acpi_gpio);
acpi_detach_data(handle, acpi_gpio_chip_dh);
kfree(acpi_gpio);
}
static int acpi_gpio_package_count(const union acpi_object *obj)
{
const union acpi_object *element = obj->package.elements;
const union acpi_object *end = element + obj->package.count;
unsigned int count = 0;
while (element < end) {
switch (element->type) {
case ACPI_TYPE_LOCAL_REFERENCE:
element += 3;
/* Fallthrough */
case ACPI_TYPE_INTEGER:
element++;
count++;
break;
default:
return -EPROTO;
}
}
return count;
}
static int acpi_find_gpio_count(struct acpi_resource *ares, void *data)
{
unsigned int *count = data;
if (ares->type == ACPI_RESOURCE_TYPE_GPIO)
*count += ares->data.gpio.pin_table_length;
return 1;
}
/**
* acpi_gpio_count - return the number of GPIOs associated with a
* device / function or -ENOENT if no GPIO has been
* assigned to the requested function.
* @dev: GPIO consumer, can be NULL for system-global GPIOs
* @con_id: function within the GPIO consumer
*/
int acpi_gpio_count(struct device *dev, const char *con_id)
{
struct acpi_device *adev = ACPI_COMPANION(dev);
const union acpi_object *obj;
const struct acpi_gpio_mapping *gm;
int count = -ENOENT;
int ret;
char propname[32];
unsigned int i;
/* Try first from _DSD */
for (i = 0; i < ARRAY_SIZE(gpio_suffixes); i++) {
if (con_id)
snprintf(propname, sizeof(propname), "%s-%s",
con_id, gpio_suffixes[i]);
else
snprintf(propname, sizeof(propname), "%s",
gpio_suffixes[i]);
ret = acpi_dev_get_property(adev, propname, ACPI_TYPE_ANY,
&obj);
if (ret == 0) {
if (obj->type == ACPI_TYPE_LOCAL_REFERENCE)
count = 1;
else if (obj->type == ACPI_TYPE_PACKAGE)
count = acpi_gpio_package_count(obj);
} else if (adev->driver_gpios) {
for (gm = adev->driver_gpios; gm->name; gm++)
if (strcmp(propname, gm->name) == 0) {
count = gm->size;
break;
}
}
if (count > 0)
break;
}
/* Then from plain _CRS GPIOs */
if (count < 0) {
struct list_head resource_list;
unsigned int crs_count = 0;
if (!acpi_can_fallback_to_crs(adev, con_id))
return count;
INIT_LIST_HEAD(&resource_list);
acpi_dev_get_resources(adev, &resource_list,
acpi_find_gpio_count, &crs_count);
acpi_dev_free_resource_list(&resource_list);
if (crs_count > 0)
count = crs_count;
}
return count ? count : -ENOENT;
}
bool acpi_can_fallback_to_crs(struct acpi_device *adev, const char *con_id)
{
/* Never allow fallback if the device has properties */
if (acpi_dev_has_props(adev) || adev->driver_gpios)
return false;
gpio: acpi: Even more tighten up ACPI GPIO lookups The commit 10cf4899f8af ("gpiolib: tighten up ACPI legacy gpio lookups") prevents to getting same resource twice if the driver asks twice using different connection ID. But the whole idea of fallback might bring some problems. Imagine the case when we have two versions of BIOS/hardware where in one _DSD is introduced along with GPIO resources, but the other one uses just plain GPIO resource for another purpose Case 1: Device (DEVX) { ... Name (_CRS, ResourceTemplate () { GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {15} }) Name (_DSD, Package () { ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"), Package () { Package () {"some-gpios", Package() {^DEVX, 0, 0, 0 }}, } }) } Case 2: Device (DEVX) { ... Name (_CRS, ResourceTemplate () { GpioIo (Exclusive, PullUp, 0, 0, IoRestrictionInputOnly, "\\_SB.GPO0", 0, ResourceConsumer) {27} }) } To prevent the possible misconfiguration tighten up even more GPIO ACPI lookups for case without connection ID provided. In the past the issue had been triggered by "use mctrl_gpio helpers" series [1,2]. [1] commit 4ef03d328769 ("tty/serial/8250: use mctrl_gpio helpers") [2] https://patchwork.kernel.org/patch/9283745/ Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Bastien Nocera <hadess@hadess.net> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-23 20:03:19 +03:00
return con_id == NULL;
}
gpiolib-acpi: make sure we trigger edge events at least once on boot On some systems using edge triggered ACPI Event Interrupts, the initial state at boot is not setup by the firmware, instead relying on the edge irq event handler running at least once to setup the initial state. 2 known examples of this are: 1) The Surface 3 has its _LID state controlled by an ACPI operation region triggered by a GPIO event: OperationRegion (GPOR, GeneralPurposeIo, Zero, One) Field (GPOR, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Shared, PullNone, 0x0000, 0x0000, IoRestrictionNone, "\\_SB.GPO0", 0x00, ResourceConsumer, , ) { // Pin list 0x004C } ), HELD, 1 } Method (_E4C, 0, Serialized) // _Exx: Edge-Triggered GPE { If ((HELD == One)) { ^^LID.LIDB = One } Else { ^^LID.LIDB = Zero Notify (LID, 0x80) // Status Change } Notify (^^PCI0.SPI1.NTRG, One) // Device Check } Currently, the state of LIDB is wrong until the user actually closes or open the cover. We need to trigger the GPIO event once to update the internal ACPI state. Coincidentally, this also enables the Surface 2 integrated HID sensor hub which also requires an ACPI gpio operation region to start initialization. 2) Various Bay Trail based tablets come with an external USB mux and TI T1210B USB phy to enable USB gadget mode. The mux is controlled by a GPIO which is controlled by an edge triggered ACPI Event Interrupt which monitors the micro-USB ID pin. When the tablet is connected to a PC (or no cable is plugged in), the ID pin is high and the tablet should be in gadget mode. But the GPIO controlling the mux is initialized by the firmware so that the USB data lines are muxed to the host controller. This means that if the user wants to use gadget mode, the user needs to first plug in a host-cable to force the ID pin low and then unplug it and connect the tablet to a PC, to get the ACPI event handler to run and switch the mux to device mode, This commit fixes both by running the event-handler once on boot. Note that the running of the event-handler is done from a late_initcall, this is done because the handler AML code may rely on OperationRegions registered by other builtin drivers. This avoids errors like these: [ 0.133026] ACPI Error: No handler for Region [XSCG] ((____ptrval____)) [GenericSerialBus] (20180531/evregion-132) [ 0.133036] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20180531/exfldio-265) [ 0.133046] ACPI Error: Method parse/execution failed \_SB.GPO2._E12, AE_NOT_EXIST (20180531/psparse-516) Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> [hdegoede: Document BYT USB mux reliance on initial trigger] [hdegoede: Run event handler from a late_initcall, rather then immediately] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-12 18:25:06 +03:00
/* Run deferred acpi_gpiochip_request_interrupts() */
static int acpi_gpio_handle_deferred_request_interrupts(void)
gpiolib-acpi: make sure we trigger edge events at least once on boot On some systems using edge triggered ACPI Event Interrupts, the initial state at boot is not setup by the firmware, instead relying on the edge irq event handler running at least once to setup the initial state. 2 known examples of this are: 1) The Surface 3 has its _LID state controlled by an ACPI operation region triggered by a GPIO event: OperationRegion (GPOR, GeneralPurposeIo, Zero, One) Field (GPOR, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Shared, PullNone, 0x0000, 0x0000, IoRestrictionNone, "\\_SB.GPO0", 0x00, ResourceConsumer, , ) { // Pin list 0x004C } ), HELD, 1 } Method (_E4C, 0, Serialized) // _Exx: Edge-Triggered GPE { If ((HELD == One)) { ^^LID.LIDB = One } Else { ^^LID.LIDB = Zero Notify (LID, 0x80) // Status Change } Notify (^^PCI0.SPI1.NTRG, One) // Device Check } Currently, the state of LIDB is wrong until the user actually closes or open the cover. We need to trigger the GPIO event once to update the internal ACPI state. Coincidentally, this also enables the Surface 2 integrated HID sensor hub which also requires an ACPI gpio operation region to start initialization. 2) Various Bay Trail based tablets come with an external USB mux and TI T1210B USB phy to enable USB gadget mode. The mux is controlled by a GPIO which is controlled by an edge triggered ACPI Event Interrupt which monitors the micro-USB ID pin. When the tablet is connected to a PC (or no cable is plugged in), the ID pin is high and the tablet should be in gadget mode. But the GPIO controlling the mux is initialized by the firmware so that the USB data lines are muxed to the host controller. This means that if the user wants to use gadget mode, the user needs to first plug in a host-cable to force the ID pin low and then unplug it and connect the tablet to a PC, to get the ACPI event handler to run and switch the mux to device mode, This commit fixes both by running the event-handler once on boot. Note that the running of the event-handler is done from a late_initcall, this is done because the handler AML code may rely on OperationRegions registered by other builtin drivers. This avoids errors like these: [ 0.133026] ACPI Error: No handler for Region [XSCG] ((____ptrval____)) [GenericSerialBus] (20180531/evregion-132) [ 0.133036] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20180531/exfldio-265) [ 0.133046] ACPI Error: Method parse/execution failed \_SB.GPO2._E12, AE_NOT_EXIST (20180531/psparse-516) Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> [hdegoede: Document BYT USB mux reliance on initial trigger] [hdegoede: Run event handler from a late_initcall, rather then immediately] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-12 18:25:06 +03:00
{
struct acpi_gpio_chip *acpi_gpio, *tmp;
mutex_lock(&acpi_gpio_deferred_req_irqs_lock);
list_for_each_entry_safe(acpi_gpio, tmp,
&acpi_gpio_deferred_req_irqs_list,
deferred_req_irqs_list_entry) {
acpi_handle handle;
gpiolib-acpi: make sure we trigger edge events at least once on boot On some systems using edge triggered ACPI Event Interrupts, the initial state at boot is not setup by the firmware, instead relying on the edge irq event handler running at least once to setup the initial state. 2 known examples of this are: 1) The Surface 3 has its _LID state controlled by an ACPI operation region triggered by a GPIO event: OperationRegion (GPOR, GeneralPurposeIo, Zero, One) Field (GPOR, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Shared, PullNone, 0x0000, 0x0000, IoRestrictionNone, "\\_SB.GPO0", 0x00, ResourceConsumer, , ) { // Pin list 0x004C } ), HELD, 1 } Method (_E4C, 0, Serialized) // _Exx: Edge-Triggered GPE { If ((HELD == One)) { ^^LID.LIDB = One } Else { ^^LID.LIDB = Zero Notify (LID, 0x80) // Status Change } Notify (^^PCI0.SPI1.NTRG, One) // Device Check } Currently, the state of LIDB is wrong until the user actually closes or open the cover. We need to trigger the GPIO event once to update the internal ACPI state. Coincidentally, this also enables the Surface 2 integrated HID sensor hub which also requires an ACPI gpio operation region to start initialization. 2) Various Bay Trail based tablets come with an external USB mux and TI T1210B USB phy to enable USB gadget mode. The mux is controlled by a GPIO which is controlled by an edge triggered ACPI Event Interrupt which monitors the micro-USB ID pin. When the tablet is connected to a PC (or no cable is plugged in), the ID pin is high and the tablet should be in gadget mode. But the GPIO controlling the mux is initialized by the firmware so that the USB data lines are muxed to the host controller. This means that if the user wants to use gadget mode, the user needs to first plug in a host-cable to force the ID pin low and then unplug it and connect the tablet to a PC, to get the ACPI event handler to run and switch the mux to device mode, This commit fixes both by running the event-handler once on boot. Note that the running of the event-handler is done from a late_initcall, this is done because the handler AML code may rely on OperationRegions registered by other builtin drivers. This avoids errors like these: [ 0.133026] ACPI Error: No handler for Region [XSCG] ((____ptrval____)) [GenericSerialBus] (20180531/evregion-132) [ 0.133036] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20180531/exfldio-265) [ 0.133046] ACPI Error: Method parse/execution failed \_SB.GPO2._E12, AE_NOT_EXIST (20180531/psparse-516) Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> [hdegoede: Document BYT USB mux reliance on initial trigger] [hdegoede: Run event handler from a late_initcall, rather then immediately] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-12 18:25:06 +03:00
handle = ACPI_HANDLE(acpi_gpio->chip->parent);
acpi_walk_resources(handle, "_AEI",
acpi_gpiochip_request_interrupt, acpi_gpio);
list_del_init(&acpi_gpio->deferred_req_irqs_list_entry);
gpiolib-acpi: make sure we trigger edge events at least once on boot On some systems using edge triggered ACPI Event Interrupts, the initial state at boot is not setup by the firmware, instead relying on the edge irq event handler running at least once to setup the initial state. 2 known examples of this are: 1) The Surface 3 has its _LID state controlled by an ACPI operation region triggered by a GPIO event: OperationRegion (GPOR, GeneralPurposeIo, Zero, One) Field (GPOR, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Shared, PullNone, 0x0000, 0x0000, IoRestrictionNone, "\\_SB.GPO0", 0x00, ResourceConsumer, , ) { // Pin list 0x004C } ), HELD, 1 } Method (_E4C, 0, Serialized) // _Exx: Edge-Triggered GPE { If ((HELD == One)) { ^^LID.LIDB = One } Else { ^^LID.LIDB = Zero Notify (LID, 0x80) // Status Change } Notify (^^PCI0.SPI1.NTRG, One) // Device Check } Currently, the state of LIDB is wrong until the user actually closes or open the cover. We need to trigger the GPIO event once to update the internal ACPI state. Coincidentally, this also enables the Surface 2 integrated HID sensor hub which also requires an ACPI gpio operation region to start initialization. 2) Various Bay Trail based tablets come with an external USB mux and TI T1210B USB phy to enable USB gadget mode. The mux is controlled by a GPIO which is controlled by an edge triggered ACPI Event Interrupt which monitors the micro-USB ID pin. When the tablet is connected to a PC (or no cable is plugged in), the ID pin is high and the tablet should be in gadget mode. But the GPIO controlling the mux is initialized by the firmware so that the USB data lines are muxed to the host controller. This means that if the user wants to use gadget mode, the user needs to first plug in a host-cable to force the ID pin low and then unplug it and connect the tablet to a PC, to get the ACPI event handler to run and switch the mux to device mode, This commit fixes both by running the event-handler once on boot. Note that the running of the event-handler is done from a late_initcall, this is done because the handler AML code may rely on OperationRegions registered by other builtin drivers. This avoids errors like these: [ 0.133026] ACPI Error: No handler for Region [XSCG] ((____ptrval____)) [GenericSerialBus] (20180531/evregion-132) [ 0.133036] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20180531/exfldio-265) [ 0.133046] ACPI Error: Method parse/execution failed \_SB.GPO2._E12, AE_NOT_EXIST (20180531/psparse-516) Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> [hdegoede: Document BYT USB mux reliance on initial trigger] [hdegoede: Run event handler from a late_initcall, rather then immediately] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-12 18:25:06 +03:00
}
acpi_gpio_deferred_req_irqs_done = true;
mutex_unlock(&acpi_gpio_deferred_req_irqs_lock);
gpiolib-acpi: make sure we trigger edge events at least once on boot On some systems using edge triggered ACPI Event Interrupts, the initial state at boot is not setup by the firmware, instead relying on the edge irq event handler running at least once to setup the initial state. 2 known examples of this are: 1) The Surface 3 has its _LID state controlled by an ACPI operation region triggered by a GPIO event: OperationRegion (GPOR, GeneralPurposeIo, Zero, One) Field (GPOR, ByteAcc, NoLock, Preserve) { Connection ( GpioIo (Shared, PullNone, 0x0000, 0x0000, IoRestrictionNone, "\\_SB.GPO0", 0x00, ResourceConsumer, , ) { // Pin list 0x004C } ), HELD, 1 } Method (_E4C, 0, Serialized) // _Exx: Edge-Triggered GPE { If ((HELD == One)) { ^^LID.LIDB = One } Else { ^^LID.LIDB = Zero Notify (LID, 0x80) // Status Change } Notify (^^PCI0.SPI1.NTRG, One) // Device Check } Currently, the state of LIDB is wrong until the user actually closes or open the cover. We need to trigger the GPIO event once to update the internal ACPI state. Coincidentally, this also enables the Surface 2 integrated HID sensor hub which also requires an ACPI gpio operation region to start initialization. 2) Various Bay Trail based tablets come with an external USB mux and TI T1210B USB phy to enable USB gadget mode. The mux is controlled by a GPIO which is controlled by an edge triggered ACPI Event Interrupt which monitors the micro-USB ID pin. When the tablet is connected to a PC (or no cable is plugged in), the ID pin is high and the tablet should be in gadget mode. But the GPIO controlling the mux is initialized by the firmware so that the USB data lines are muxed to the host controller. This means that if the user wants to use gadget mode, the user needs to first plug in a host-cable to force the ID pin low and then unplug it and connect the tablet to a PC, to get the ACPI event handler to run and switch the mux to device mode, This commit fixes both by running the event-handler once on boot. Note that the running of the event-handler is done from a late_initcall, this is done because the handler AML code may rely on OperationRegions registered by other builtin drivers. This avoids errors like these: [ 0.133026] ACPI Error: No handler for Region [XSCG] ((____ptrval____)) [GenericSerialBus] (20180531/evregion-132) [ 0.133036] ACPI Error: Region GenericSerialBus (ID=9) has no handler (20180531/exfldio-265) [ 0.133046] ACPI Error: Method parse/execution failed \_SB.GPO2._E12, AE_NOT_EXIST (20180531/psparse-516) Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> [hdegoede: Document BYT USB mux reliance on initial trigger] [hdegoede: Run event handler from a late_initcall, rather then immediately] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-07-12 18:25:06 +03:00
return 0;
}
/* We must use _sync so that this runs after the first deferred_probe run */
late_initcall_sync(acpi_gpio_handle_deferred_request_interrupts);