WSL2-Linux-Kernel/include/linux/rcupdate_trace.h

101 строка
3.1 KiB
C
Исходник Обычный вид История

rcu-tasks: Add an RCU Tasks Trace to simplify protection of tracing hooks Because RCU does not watch exception early-entry/late-exit, idle-loop, or CPU-hotplug execution, protection of tracing and BPF operations is needlessly complicated. This commit therefore adds a variant of Tasks RCU that: o Has explicit read-side markers to allow finite grace periods in the face of in-kernel loops for PREEMPT=n builds. These markers are rcu_read_lock_trace() and rcu_read_unlock_trace(). o Protects code in the idle loop, exception entry/exit, and CPU-hotplug code paths. In this respect, RCU-tasks trace is similar to SRCU, but with lighter-weight readers. o Avoids expensive read-side instruction, having overhead similar to that of Preemptible RCU. There are of course downsides: o The grace-period code can send IPIs to CPUs, even when those CPUs are in the idle loop or in nohz_full userspace. This is mitigated by later commits. o It is necessary to scan the full tasklist, much as for Tasks RCU. o There is a single callback queue guarded by a single lock, again, much as for Tasks RCU. However, those early use cases that request multiple grace periods in quick succession are expected to do so from a single task, which makes the single lock almost irrelevant. If needed, multiple callback queues can be provided using any number of schemes. Perhaps most important, this variant of RCU does not affect the vanilla flavors, rcu_preempt and rcu_sched. The fact that RCU Tasks Trace readers can operate from idle, offline, and exception entry/exit in no way enables rcu_preempt and rcu_sched readers to do so. The memory ordering was outlined here: https://lore.kernel.org/lkml/20200319034030.GX3199@paulmck-ThinkPad-P72/ This effort benefited greatly from off-list discussions of BPF requirements with Alexei Starovoitov and Andrii Nakryiko. At least some of the on-list discussions are captured in the Link: tags below. In addition, KCSAN was quite helpful in finding some early bugs. Link: https://lore.kernel.org/lkml/20200219150744.428764577@infradead.org/ Link: https://lore.kernel.org/lkml/87mu8p797b.fsf@nanos.tec.linutronix.de/ Link: https://lore.kernel.org/lkml/20200225221305.605144982@linutronix.de/ Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Andrii Nakryiko <andriin@fb.com> [ paulmck: Apply feedback from Steve Rostedt and Joel Fernandes. ] [ paulmck: Decrement trc_n_readers_need_end upon IPI failure. ] [ paulmck: Fix locking issue reported by rcutorture. ] Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-03-10 05:56:53 +03:00
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Read-Copy Update mechanism for mutual exclusion, adapted for tracing.
*
* Copyright (C) 2020 Paul E. McKenney.
*/
#ifndef __LINUX_RCUPDATE_TRACE_H
#define __LINUX_RCUPDATE_TRACE_H
#include <linux/sched.h>
#include <linux/rcupdate.h>
extern struct lockdep_map rcu_trace_lock_map;
#ifdef CONFIG_DEBUG_LOCK_ALLOC
rcu-tasks: Add an RCU Tasks Trace to simplify protection of tracing hooks Because RCU does not watch exception early-entry/late-exit, idle-loop, or CPU-hotplug execution, protection of tracing and BPF operations is needlessly complicated. This commit therefore adds a variant of Tasks RCU that: o Has explicit read-side markers to allow finite grace periods in the face of in-kernel loops for PREEMPT=n builds. These markers are rcu_read_lock_trace() and rcu_read_unlock_trace(). o Protects code in the idle loop, exception entry/exit, and CPU-hotplug code paths. In this respect, RCU-tasks trace is similar to SRCU, but with lighter-weight readers. o Avoids expensive read-side instruction, having overhead similar to that of Preemptible RCU. There are of course downsides: o The grace-period code can send IPIs to CPUs, even when those CPUs are in the idle loop or in nohz_full userspace. This is mitigated by later commits. o It is necessary to scan the full tasklist, much as for Tasks RCU. o There is a single callback queue guarded by a single lock, again, much as for Tasks RCU. However, those early use cases that request multiple grace periods in quick succession are expected to do so from a single task, which makes the single lock almost irrelevant. If needed, multiple callback queues can be provided using any number of schemes. Perhaps most important, this variant of RCU does not affect the vanilla flavors, rcu_preempt and rcu_sched. The fact that RCU Tasks Trace readers can operate from idle, offline, and exception entry/exit in no way enables rcu_preempt and rcu_sched readers to do so. The memory ordering was outlined here: https://lore.kernel.org/lkml/20200319034030.GX3199@paulmck-ThinkPad-P72/ This effort benefited greatly from off-list discussions of BPF requirements with Alexei Starovoitov and Andrii Nakryiko. At least some of the on-list discussions are captured in the Link: tags below. In addition, KCSAN was quite helpful in finding some early bugs. Link: https://lore.kernel.org/lkml/20200219150744.428764577@infradead.org/ Link: https://lore.kernel.org/lkml/87mu8p797b.fsf@nanos.tec.linutronix.de/ Link: https://lore.kernel.org/lkml/20200225221305.605144982@linutronix.de/ Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Andrii Nakryiko <andriin@fb.com> [ paulmck: Apply feedback from Steve Rostedt and Joel Fernandes. ] [ paulmck: Decrement trc_n_readers_need_end upon IPI failure. ] [ paulmck: Fix locking issue reported by rcutorture. ] Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-03-10 05:56:53 +03:00
static inline int rcu_read_lock_trace_held(void)
{
return lock_is_held(&rcu_trace_lock_map);
}
#else /* #ifdef CONFIG_DEBUG_LOCK_ALLOC */
static inline int rcu_read_lock_trace_held(void)
{
return 1;
}
#endif /* #else #ifdef CONFIG_DEBUG_LOCK_ALLOC */
#ifdef CONFIG_TASKS_TRACE_RCU
void rcu_read_unlock_trace_special(struct task_struct *t);
rcu-tasks: Add an RCU Tasks Trace to simplify protection of tracing hooks Because RCU does not watch exception early-entry/late-exit, idle-loop, or CPU-hotplug execution, protection of tracing and BPF operations is needlessly complicated. This commit therefore adds a variant of Tasks RCU that: o Has explicit read-side markers to allow finite grace periods in the face of in-kernel loops for PREEMPT=n builds. These markers are rcu_read_lock_trace() and rcu_read_unlock_trace(). o Protects code in the idle loop, exception entry/exit, and CPU-hotplug code paths. In this respect, RCU-tasks trace is similar to SRCU, but with lighter-weight readers. o Avoids expensive read-side instruction, having overhead similar to that of Preemptible RCU. There are of course downsides: o The grace-period code can send IPIs to CPUs, even when those CPUs are in the idle loop or in nohz_full userspace. This is mitigated by later commits. o It is necessary to scan the full tasklist, much as for Tasks RCU. o There is a single callback queue guarded by a single lock, again, much as for Tasks RCU. However, those early use cases that request multiple grace periods in quick succession are expected to do so from a single task, which makes the single lock almost irrelevant. If needed, multiple callback queues can be provided using any number of schemes. Perhaps most important, this variant of RCU does not affect the vanilla flavors, rcu_preempt and rcu_sched. The fact that RCU Tasks Trace readers can operate from idle, offline, and exception entry/exit in no way enables rcu_preempt and rcu_sched readers to do so. The memory ordering was outlined here: https://lore.kernel.org/lkml/20200319034030.GX3199@paulmck-ThinkPad-P72/ This effort benefited greatly from off-list discussions of BPF requirements with Alexei Starovoitov and Andrii Nakryiko. At least some of the on-list discussions are captured in the Link: tags below. In addition, KCSAN was quite helpful in finding some early bugs. Link: https://lore.kernel.org/lkml/20200219150744.428764577@infradead.org/ Link: https://lore.kernel.org/lkml/87mu8p797b.fsf@nanos.tec.linutronix.de/ Link: https://lore.kernel.org/lkml/20200225221305.605144982@linutronix.de/ Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Andrii Nakryiko <andriin@fb.com> [ paulmck: Apply feedback from Steve Rostedt and Joel Fernandes. ] [ paulmck: Decrement trc_n_readers_need_end upon IPI failure. ] [ paulmck: Fix locking issue reported by rcutorture. ] Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-03-10 05:56:53 +03:00
/**
* rcu_read_lock_trace - mark beginning of RCU-trace read-side critical section
*
* When synchronize_rcu_tasks_trace() is invoked by one task, then that
* task is guaranteed to block until all other tasks exit their read-side
rcu-tasks: Add an RCU Tasks Trace to simplify protection of tracing hooks Because RCU does not watch exception early-entry/late-exit, idle-loop, or CPU-hotplug execution, protection of tracing and BPF operations is needlessly complicated. This commit therefore adds a variant of Tasks RCU that: o Has explicit read-side markers to allow finite grace periods in the face of in-kernel loops for PREEMPT=n builds. These markers are rcu_read_lock_trace() and rcu_read_unlock_trace(). o Protects code in the idle loop, exception entry/exit, and CPU-hotplug code paths. In this respect, RCU-tasks trace is similar to SRCU, but with lighter-weight readers. o Avoids expensive read-side instruction, having overhead similar to that of Preemptible RCU. There are of course downsides: o The grace-period code can send IPIs to CPUs, even when those CPUs are in the idle loop or in nohz_full userspace. This is mitigated by later commits. o It is necessary to scan the full tasklist, much as for Tasks RCU. o There is a single callback queue guarded by a single lock, again, much as for Tasks RCU. However, those early use cases that request multiple grace periods in quick succession are expected to do so from a single task, which makes the single lock almost irrelevant. If needed, multiple callback queues can be provided using any number of schemes. Perhaps most important, this variant of RCU does not affect the vanilla flavors, rcu_preempt and rcu_sched. The fact that RCU Tasks Trace readers can operate from idle, offline, and exception entry/exit in no way enables rcu_preempt and rcu_sched readers to do so. The memory ordering was outlined here: https://lore.kernel.org/lkml/20200319034030.GX3199@paulmck-ThinkPad-P72/ This effort benefited greatly from off-list discussions of BPF requirements with Alexei Starovoitov and Andrii Nakryiko. At least some of the on-list discussions are captured in the Link: tags below. In addition, KCSAN was quite helpful in finding some early bugs. Link: https://lore.kernel.org/lkml/20200219150744.428764577@infradead.org/ Link: https://lore.kernel.org/lkml/87mu8p797b.fsf@nanos.tec.linutronix.de/ Link: https://lore.kernel.org/lkml/20200225221305.605144982@linutronix.de/ Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Andrii Nakryiko <andriin@fb.com> [ paulmck: Apply feedback from Steve Rostedt and Joel Fernandes. ] [ paulmck: Decrement trc_n_readers_need_end upon IPI failure. ] [ paulmck: Fix locking issue reported by rcutorture. ] Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-03-10 05:56:53 +03:00
* critical sections. Similarly, if call_rcu_trace() is invoked on one
* task while other tasks are within RCU read-side critical sections,
* invocation of the corresponding RCU callback is deferred until after
* the all the other tasks exit their critical sections.
*
* For more details, please see the documentation for rcu_read_lock().
*/
static inline void rcu_read_lock_trace(void)
{
struct task_struct *t = current;
WRITE_ONCE(t->trc_reader_nesting, READ_ONCE(t->trc_reader_nesting) + 1);
rcu-tasks: Fix grace-period/unlock race in RCU Tasks Trace The more intense grace-period processing resulting from the 50x RCU Tasks Trace grace-period speedups exposed the following race condition: o Task A running on CPU 0 executes rcu_read_lock_trace(), entering a read-side critical section. o When Task A eventually invokes rcu_read_unlock_trace() to exit its read-side critical section, this function notes that the ->trc_reader_special.s flag is zero and and therefore invoke wil set ->trc_reader_nesting to zero using WRITE_ONCE(). But before that happens... o The RCU Tasks Trace grace-period kthread running on some other CPU interrogates Task A, but this fails because this task is currently running. This kthread therefore sends an IPI to CPU 0. o CPU 0 receives the IPI, and thus invokes trc_read_check_handler(). Because Task A has not yet cleared its ->trc_reader_nesting counter, this function sees that Task A is still within its read-side critical section. This function therefore sets the ->trc_reader_nesting.b.need_qs flag, AKA the .need_qs flag. Except that Task A has already checked the .need_qs flag, which is part of the ->trc_reader_special.s flag. The .need_qs flag therefore remains set until Task A's next rcu_read_unlock_trace(). o Task A now invokes synchronize_rcu_tasks_trace(), which cannot start a new grace period until the current grace period completes. And thus cannot return until after that time. But Task A's .need_qs flag is still set, which prevents the current grace period from completing. And because Task A is blocked, it will never execute rcu_read_unlock_trace() until its call to synchronize_rcu_tasks_trace() returns. We are therefore deadlocked. This race is improbable, but 80 hours of rcutorture made it happen twice. The race was possible before the grace-period speedup, but roughly 50x less probable. Several thousand hours of rcutorture would have been necessary to have a reasonable chance of making this happen before this 50x speedup. This commit therefore eliminates this deadlock by setting ->trc_reader_nesting to a large negative number before checking the .need_qs and zeroing (or decrementing with respect to its initial value) ->trc_reader_nesting. For its part, the IPI handler's trc_read_check_handler() function adds a check for negative values, deferring evaluation of the task in this case. Taken together, these changes avoid this deadlock scenario. Fixes: 276c410448db ("rcu-tasks: Split ->trc_reader_need_end") Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: <bpf@vger.kernel.org> Cc: <stable@vger.kernel.org> # 5.7.x Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-09-15 01:44:37 +03:00
barrier();
if (IS_ENABLED(CONFIG_TASKS_TRACE_RCU_READ_MB) &&
t->trc_reader_special.b.need_mb)
smp_mb(); // Pairs with update-side barriers
rcu-tasks: Add an RCU Tasks Trace to simplify protection of tracing hooks Because RCU does not watch exception early-entry/late-exit, idle-loop, or CPU-hotplug execution, protection of tracing and BPF operations is needlessly complicated. This commit therefore adds a variant of Tasks RCU that: o Has explicit read-side markers to allow finite grace periods in the face of in-kernel loops for PREEMPT=n builds. These markers are rcu_read_lock_trace() and rcu_read_unlock_trace(). o Protects code in the idle loop, exception entry/exit, and CPU-hotplug code paths. In this respect, RCU-tasks trace is similar to SRCU, but with lighter-weight readers. o Avoids expensive read-side instruction, having overhead similar to that of Preemptible RCU. There are of course downsides: o The grace-period code can send IPIs to CPUs, even when those CPUs are in the idle loop or in nohz_full userspace. This is mitigated by later commits. o It is necessary to scan the full tasklist, much as for Tasks RCU. o There is a single callback queue guarded by a single lock, again, much as for Tasks RCU. However, those early use cases that request multiple grace periods in quick succession are expected to do so from a single task, which makes the single lock almost irrelevant. If needed, multiple callback queues can be provided using any number of schemes. Perhaps most important, this variant of RCU does not affect the vanilla flavors, rcu_preempt and rcu_sched. The fact that RCU Tasks Trace readers can operate from idle, offline, and exception entry/exit in no way enables rcu_preempt and rcu_sched readers to do so. The memory ordering was outlined here: https://lore.kernel.org/lkml/20200319034030.GX3199@paulmck-ThinkPad-P72/ This effort benefited greatly from off-list discussions of BPF requirements with Alexei Starovoitov and Andrii Nakryiko. At least some of the on-list discussions are captured in the Link: tags below. In addition, KCSAN was quite helpful in finding some early bugs. Link: https://lore.kernel.org/lkml/20200219150744.428764577@infradead.org/ Link: https://lore.kernel.org/lkml/87mu8p797b.fsf@nanos.tec.linutronix.de/ Link: https://lore.kernel.org/lkml/20200225221305.605144982@linutronix.de/ Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Andrii Nakryiko <andriin@fb.com> [ paulmck: Apply feedback from Steve Rostedt and Joel Fernandes. ] [ paulmck: Decrement trc_n_readers_need_end upon IPI failure. ] [ paulmck: Fix locking issue reported by rcutorture. ] Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-03-10 05:56:53 +03:00
rcu_lock_acquire(&rcu_trace_lock_map);
}
/**
* rcu_read_unlock_trace - mark end of RCU-trace read-side critical section
*
* Pairs with a preceding call to rcu_read_lock_trace(), and nesting is
* allowed. Invoking a rcu_read_unlock_trace() when there is no matching
* rcu_read_lock_trace() is verboten, and will result in lockdep complaints.
*
* For more details, please see the documentation for rcu_read_unlock().
*/
static inline void rcu_read_unlock_trace(void)
{
int nesting;
struct task_struct *t = current;
rcu_lock_release(&rcu_trace_lock_map);
nesting = READ_ONCE(t->trc_reader_nesting) - 1;
rcu-tasks: Fix grace-period/unlock race in RCU Tasks Trace The more intense grace-period processing resulting from the 50x RCU Tasks Trace grace-period speedups exposed the following race condition: o Task A running on CPU 0 executes rcu_read_lock_trace(), entering a read-side critical section. o When Task A eventually invokes rcu_read_unlock_trace() to exit its read-side critical section, this function notes that the ->trc_reader_special.s flag is zero and and therefore invoke wil set ->trc_reader_nesting to zero using WRITE_ONCE(). But before that happens... o The RCU Tasks Trace grace-period kthread running on some other CPU interrogates Task A, but this fails because this task is currently running. This kthread therefore sends an IPI to CPU 0. o CPU 0 receives the IPI, and thus invokes trc_read_check_handler(). Because Task A has not yet cleared its ->trc_reader_nesting counter, this function sees that Task A is still within its read-side critical section. This function therefore sets the ->trc_reader_nesting.b.need_qs flag, AKA the .need_qs flag. Except that Task A has already checked the .need_qs flag, which is part of the ->trc_reader_special.s flag. The .need_qs flag therefore remains set until Task A's next rcu_read_unlock_trace(). o Task A now invokes synchronize_rcu_tasks_trace(), which cannot start a new grace period until the current grace period completes. And thus cannot return until after that time. But Task A's .need_qs flag is still set, which prevents the current grace period from completing. And because Task A is blocked, it will never execute rcu_read_unlock_trace() until its call to synchronize_rcu_tasks_trace() returns. We are therefore deadlocked. This race is improbable, but 80 hours of rcutorture made it happen twice. The race was possible before the grace-period speedup, but roughly 50x less probable. Several thousand hours of rcutorture would have been necessary to have a reasonable chance of making this happen before this 50x speedup. This commit therefore eliminates this deadlock by setting ->trc_reader_nesting to a large negative number before checking the .need_qs and zeroing (or decrementing with respect to its initial value) ->trc_reader_nesting. For its part, the IPI handler's trc_read_check_handler() function adds a check for negative values, deferring evaluation of the task in this case. Taken together, these changes avoid this deadlock scenario. Fixes: 276c410448db ("rcu-tasks: Split ->trc_reader_need_end") Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jiri Olsa <jolsa@redhat.com> Cc: <bpf@vger.kernel.org> Cc: <stable@vger.kernel.org> # 5.7.x Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-09-15 01:44:37 +03:00
barrier(); // Critical section before disabling.
// Disable IPI-based setting of .need_qs.
WRITE_ONCE(t->trc_reader_nesting, INT_MIN);
if (likely(!READ_ONCE(t->trc_reader_special.s)) || nesting) {
WRITE_ONCE(t->trc_reader_nesting, nesting);
rcu-tasks: Add an RCU Tasks Trace to simplify protection of tracing hooks Because RCU does not watch exception early-entry/late-exit, idle-loop, or CPU-hotplug execution, protection of tracing and BPF operations is needlessly complicated. This commit therefore adds a variant of Tasks RCU that: o Has explicit read-side markers to allow finite grace periods in the face of in-kernel loops for PREEMPT=n builds. These markers are rcu_read_lock_trace() and rcu_read_unlock_trace(). o Protects code in the idle loop, exception entry/exit, and CPU-hotplug code paths. In this respect, RCU-tasks trace is similar to SRCU, but with lighter-weight readers. o Avoids expensive read-side instruction, having overhead similar to that of Preemptible RCU. There are of course downsides: o The grace-period code can send IPIs to CPUs, even when those CPUs are in the idle loop or in nohz_full userspace. This is mitigated by later commits. o It is necessary to scan the full tasklist, much as for Tasks RCU. o There is a single callback queue guarded by a single lock, again, much as for Tasks RCU. However, those early use cases that request multiple grace periods in quick succession are expected to do so from a single task, which makes the single lock almost irrelevant. If needed, multiple callback queues can be provided using any number of schemes. Perhaps most important, this variant of RCU does not affect the vanilla flavors, rcu_preempt and rcu_sched. The fact that RCU Tasks Trace readers can operate from idle, offline, and exception entry/exit in no way enables rcu_preempt and rcu_sched readers to do so. The memory ordering was outlined here: https://lore.kernel.org/lkml/20200319034030.GX3199@paulmck-ThinkPad-P72/ This effort benefited greatly from off-list discussions of BPF requirements with Alexei Starovoitov and Andrii Nakryiko. At least some of the on-list discussions are captured in the Link: tags below. In addition, KCSAN was quite helpful in finding some early bugs. Link: https://lore.kernel.org/lkml/20200219150744.428764577@infradead.org/ Link: https://lore.kernel.org/lkml/87mu8p797b.fsf@nanos.tec.linutronix.de/ Link: https://lore.kernel.org/lkml/20200225221305.605144982@linutronix.de/ Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Andrii Nakryiko <andriin@fb.com> [ paulmck: Apply feedback from Steve Rostedt and Joel Fernandes. ] [ paulmck: Decrement trc_n_readers_need_end upon IPI failure. ] [ paulmck: Fix locking issue reported by rcutorture. ] Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-03-10 05:56:53 +03:00
return; // We assume shallow reader nesting.
}
WARN_ON_ONCE(nesting != 0);
rcu_read_unlock_trace_special(t);
rcu-tasks: Add an RCU Tasks Trace to simplify protection of tracing hooks Because RCU does not watch exception early-entry/late-exit, idle-loop, or CPU-hotplug execution, protection of tracing and BPF operations is needlessly complicated. This commit therefore adds a variant of Tasks RCU that: o Has explicit read-side markers to allow finite grace periods in the face of in-kernel loops for PREEMPT=n builds. These markers are rcu_read_lock_trace() and rcu_read_unlock_trace(). o Protects code in the idle loop, exception entry/exit, and CPU-hotplug code paths. In this respect, RCU-tasks trace is similar to SRCU, but with lighter-weight readers. o Avoids expensive read-side instruction, having overhead similar to that of Preemptible RCU. There are of course downsides: o The grace-period code can send IPIs to CPUs, even when those CPUs are in the idle loop or in nohz_full userspace. This is mitigated by later commits. o It is necessary to scan the full tasklist, much as for Tasks RCU. o There is a single callback queue guarded by a single lock, again, much as for Tasks RCU. However, those early use cases that request multiple grace periods in quick succession are expected to do so from a single task, which makes the single lock almost irrelevant. If needed, multiple callback queues can be provided using any number of schemes. Perhaps most important, this variant of RCU does not affect the vanilla flavors, rcu_preempt and rcu_sched. The fact that RCU Tasks Trace readers can operate from idle, offline, and exception entry/exit in no way enables rcu_preempt and rcu_sched readers to do so. The memory ordering was outlined here: https://lore.kernel.org/lkml/20200319034030.GX3199@paulmck-ThinkPad-P72/ This effort benefited greatly from off-list discussions of BPF requirements with Alexei Starovoitov and Andrii Nakryiko. At least some of the on-list discussions are captured in the Link: tags below. In addition, KCSAN was quite helpful in finding some early bugs. Link: https://lore.kernel.org/lkml/20200219150744.428764577@infradead.org/ Link: https://lore.kernel.org/lkml/87mu8p797b.fsf@nanos.tec.linutronix.de/ Link: https://lore.kernel.org/lkml/20200225221305.605144982@linutronix.de/ Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Andrii Nakryiko <andriin@fb.com> [ paulmck: Apply feedback from Steve Rostedt and Joel Fernandes. ] [ paulmck: Decrement trc_n_readers_need_end upon IPI failure. ] [ paulmck: Fix locking issue reported by rcutorture. ] Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-03-10 05:56:53 +03:00
}
void call_rcu_tasks_trace(struct rcu_head *rhp, rcu_callback_t func);
void synchronize_rcu_tasks_trace(void);
void rcu_barrier_tasks_trace(void);
#else
/*
* The BPF JIT forms these addresses even when it doesn't call these
* functions, so provide definitions that result in runtime errors.
*/
static inline void call_rcu_tasks_trace(struct rcu_head *rhp, rcu_callback_t func) { BUG(); }
static inline void rcu_read_lock_trace(void) { BUG(); }
static inline void rcu_read_unlock_trace(void) { BUG(); }
rcu-tasks: Add an RCU Tasks Trace to simplify protection of tracing hooks Because RCU does not watch exception early-entry/late-exit, idle-loop, or CPU-hotplug execution, protection of tracing and BPF operations is needlessly complicated. This commit therefore adds a variant of Tasks RCU that: o Has explicit read-side markers to allow finite grace periods in the face of in-kernel loops for PREEMPT=n builds. These markers are rcu_read_lock_trace() and rcu_read_unlock_trace(). o Protects code in the idle loop, exception entry/exit, and CPU-hotplug code paths. In this respect, RCU-tasks trace is similar to SRCU, but with lighter-weight readers. o Avoids expensive read-side instruction, having overhead similar to that of Preemptible RCU. There are of course downsides: o The grace-period code can send IPIs to CPUs, even when those CPUs are in the idle loop or in nohz_full userspace. This is mitigated by later commits. o It is necessary to scan the full tasklist, much as for Tasks RCU. o There is a single callback queue guarded by a single lock, again, much as for Tasks RCU. However, those early use cases that request multiple grace periods in quick succession are expected to do so from a single task, which makes the single lock almost irrelevant. If needed, multiple callback queues can be provided using any number of schemes. Perhaps most important, this variant of RCU does not affect the vanilla flavors, rcu_preempt and rcu_sched. The fact that RCU Tasks Trace readers can operate from idle, offline, and exception entry/exit in no way enables rcu_preempt and rcu_sched readers to do so. The memory ordering was outlined here: https://lore.kernel.org/lkml/20200319034030.GX3199@paulmck-ThinkPad-P72/ This effort benefited greatly from off-list discussions of BPF requirements with Alexei Starovoitov and Andrii Nakryiko. At least some of the on-list discussions are captured in the Link: tags below. In addition, KCSAN was quite helpful in finding some early bugs. Link: https://lore.kernel.org/lkml/20200219150744.428764577@infradead.org/ Link: https://lore.kernel.org/lkml/87mu8p797b.fsf@nanos.tec.linutronix.de/ Link: https://lore.kernel.org/lkml/20200225221305.605144982@linutronix.de/ Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Andrii Nakryiko <andriin@fb.com> [ paulmck: Apply feedback from Steve Rostedt and Joel Fernandes. ] [ paulmck: Decrement trc_n_readers_need_end upon IPI failure. ] [ paulmck: Fix locking issue reported by rcutorture. ] Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
2020-03-10 05:56:53 +03:00
#endif /* #ifdef CONFIG_TASKS_TRACE_RCU */
#endif /* __LINUX_RCUPDATE_TRACE_H */