WSL2-Linux-Kernel/fs/ext4/xattr.c

1722 строки
46 KiB
C
Исходник Обычный вид История

/*
* linux/fs/ext4/xattr.c
*
* Copyright (C) 2001-2003 Andreas Gruenbacher, <agruen@suse.de>
*
* Fix by Harrison Xing <harrison@mountainviewdata.com>.
* Ext4 code with a lot of help from Eric Jarman <ejarman@acm.org>.
* Extended attributes for symlinks and special files added per
* suggestion of Luka Renko <luka.renko@hermes.si>.
* xattr consolidation Copyright (c) 2004 James Morris <jmorris@redhat.com>,
* Red Hat Inc.
* ea-in-inode support by Alex Tomas <alex@clusterfs.com> aka bzzz
* and Andreas Gruenbacher <agruen@suse.de>.
*/
/*
* Extended attributes are stored directly in inodes (on file systems with
* inodes bigger than 128 bytes) and on additional disk blocks. The i_file_acl
* field contains the block number if an inode uses an additional block. All
* attributes must fit in the inode and one additional block. Blocks that
* contain the identical set of attributes may be shared among several inodes.
* Identical blocks are detected by keeping a cache of blocks that have
* recently been accessed.
*
* The attributes in inodes and on blocks have a different header; the entries
* are stored in the same format:
*
* +------------------+
* | header |
* | entry 1 | |
* | entry 2 | | growing downwards
* | entry 3 | v
* | four null bytes |
* | . . . |
* | value 1 | ^
* | value 3 | | growing upwards
* | value 2 | |
* +------------------+
*
* The header is followed by multiple entry descriptors. In disk blocks, the
* entry descriptors are kept sorted. In inodes, they are unsorted. The
* attribute values are aligned to the end of the block in no specific order.
*
* Locking strategy
* ----------------
* EXT4_I(inode)->i_file_acl is protected by EXT4_I(inode)->xattr_sem.
* EA blocks are only changed if they are exclusive to an inode, so
* holding xattr_sem also means that nothing but the EA block's reference
* count can change. Multiple writers to the same block are synchronized
* by the buffer lock.
*/
#include <linux/init.h>
#include <linux/fs.h>
#include <linux/slab.h>
#include <linux/mbcache.h>
#include <linux/quotaops.h>
#include <linux/rwsem.h>
#include "ext4_jbd2.h"
#include "ext4.h"
#include "xattr.h"
#include "acl.h"
#ifdef EXT4_XATTR_DEBUG
# define ea_idebug(inode, f...) do { \
printk(KERN_DEBUG "inode %s:%lu: ", \
inode->i_sb->s_id, inode->i_ino); \
printk(f); \
printk("\n"); \
} while (0)
# define ea_bdebug(bh, f...) do { \
char b[BDEVNAME_SIZE]; \
printk(KERN_DEBUG "block %s:%lu: ", \
bdevname(bh->b_bdev, b), \
(unsigned long) bh->b_blocknr); \
printk(f); \
printk("\n"); \
} while (0)
#else
# define ea_idebug(inode, fmt, ...) no_printk(fmt, ##__VA_ARGS__)
# define ea_bdebug(bh, fmt, ...) no_printk(fmt, ##__VA_ARGS__)
#endif
static void ext4_xattr_cache_insert(struct mb_cache *, struct buffer_head *);
static struct buffer_head *ext4_xattr_cache_find(struct inode *,
struct ext4_xattr_header *,
struct mb_cache_entry **);
static void ext4_xattr_rehash(struct ext4_xattr_header *,
struct ext4_xattr_entry *);
static int ext4_xattr_list(struct dentry *dentry, char *buffer,
size_t buffer_size);
static const struct xattr_handler *ext4_xattr_handler_map[] = {
[EXT4_XATTR_INDEX_USER] = &ext4_xattr_user_handler,
#ifdef CONFIG_EXT4_FS_POSIX_ACL
[EXT4_XATTR_INDEX_POSIX_ACL_ACCESS] = &posix_acl_access_xattr_handler,
[EXT4_XATTR_INDEX_POSIX_ACL_DEFAULT] = &posix_acl_default_xattr_handler,
#endif
[EXT4_XATTR_INDEX_TRUSTED] = &ext4_xattr_trusted_handler,
#ifdef CONFIG_EXT4_FS_SECURITY
[EXT4_XATTR_INDEX_SECURITY] = &ext4_xattr_security_handler,
#endif
};
const struct xattr_handler *ext4_xattr_handlers[] = {
&ext4_xattr_user_handler,
&ext4_xattr_trusted_handler,
#ifdef CONFIG_EXT4_FS_POSIX_ACL
&posix_acl_access_xattr_handler,
&posix_acl_default_xattr_handler,
#endif
#ifdef CONFIG_EXT4_FS_SECURITY
&ext4_xattr_security_handler,
#endif
NULL
};
#define EXT4_GET_MB_CACHE(inode) (((struct ext4_sb_info *) \
inode->i_sb->s_fs_info)->s_mb_cache)
static __le32 ext4_xattr_block_csum(struct inode *inode,
sector_t block_nr,
struct ext4_xattr_header *hdr)
{
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
__u32 csum;
__le32 save_csum;
__le64 dsk_block_nr = cpu_to_le64(block_nr);
save_csum = hdr->h_checksum;
hdr->h_checksum = 0;
csum = ext4_chksum(sbi, sbi->s_csum_seed, (__u8 *)&dsk_block_nr,
sizeof(dsk_block_nr));
csum = ext4_chksum(sbi, csum, (__u8 *)hdr,
EXT4_BLOCK_SIZE(inode->i_sb));
hdr->h_checksum = save_csum;
return cpu_to_le32(csum);
}
static int ext4_xattr_block_csum_verify(struct inode *inode,
sector_t block_nr,
struct ext4_xattr_header *hdr)
{
if (EXT4_HAS_RO_COMPAT_FEATURE(inode->i_sb,
EXT4_FEATURE_RO_COMPAT_METADATA_CSUM) &&
(hdr->h_checksum != ext4_xattr_block_csum(inode, block_nr, hdr)))
return 0;
return 1;
}
static void ext4_xattr_block_csum_set(struct inode *inode,
sector_t block_nr,
struct ext4_xattr_header *hdr)
{
if (!EXT4_HAS_RO_COMPAT_FEATURE(inode->i_sb,
EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))
return;
hdr->h_checksum = ext4_xattr_block_csum(inode, block_nr, hdr);
}
static inline int ext4_handle_dirty_xattr_block(handle_t *handle,
struct inode *inode,
struct buffer_head *bh)
{
ext4_xattr_block_csum_set(inode, bh->b_blocknr, BHDR(bh));
return ext4_handle_dirty_metadata(handle, inode, bh);
}
static inline const struct xattr_handler *
ext4_xattr_handler(int name_index)
{
const struct xattr_handler *handler = NULL;
if (name_index > 0 && name_index < ARRAY_SIZE(ext4_xattr_handler_map))
handler = ext4_xattr_handler_map[name_index];
return handler;
}
/*
* Inode operation listxattr()
*
* dentry->d_inode->i_mutex: don't care
*/
ssize_t
ext4_listxattr(struct dentry *dentry, char *buffer, size_t size)
{
return ext4_xattr_list(dentry, buffer, size);
}
static int
ext4_xattr_check_names(struct ext4_xattr_entry *entry, void *end)
{
while (!IS_LAST_ENTRY(entry)) {
struct ext4_xattr_entry *next = EXT4_XATTR_NEXT(entry);
if ((void *)next >= end)
return -EIO;
entry = next;
}
return 0;
}
static inline int
ext4_xattr_check_block(struct inode *inode, struct buffer_head *bh)
{
int error;
if (buffer_verified(bh))
return 0;
if (BHDR(bh)->h_magic != cpu_to_le32(EXT4_XATTR_MAGIC) ||
BHDR(bh)->h_blocks != cpu_to_le32(1))
return -EIO;
if (!ext4_xattr_block_csum_verify(inode, bh->b_blocknr, BHDR(bh)))
return -EIO;
error = ext4_xattr_check_names(BFIRST(bh), bh->b_data + bh->b_size);
if (!error)
set_buffer_verified(bh);
return error;
}
static inline int
ext4_xattr_check_entry(struct ext4_xattr_entry *entry, size_t size)
{
size_t value_size = le32_to_cpu(entry->e_value_size);
if (entry->e_value_block != 0 || value_size > size ||
le16_to_cpu(entry->e_value_offs) + value_size > size)
return -EIO;
return 0;
}
static int
ext4_xattr_find_entry(struct ext4_xattr_entry **pentry, int name_index,
const char *name, size_t size, int sorted)
{
struct ext4_xattr_entry *entry;
size_t name_len;
int cmp = 1;
if (name == NULL)
return -EINVAL;
name_len = strlen(name);
entry = *pentry;
for (; !IS_LAST_ENTRY(entry); entry = EXT4_XATTR_NEXT(entry)) {
cmp = name_index - entry->e_name_index;
if (!cmp)
cmp = name_len - entry->e_name_len;
if (!cmp)
cmp = memcmp(name, entry->e_name, name_len);
if (cmp <= 0 && (sorted || cmp == 0))
break;
}
*pentry = entry;
if (!cmp && ext4_xattr_check_entry(entry, size))
return -EIO;
return cmp ? -ENODATA : 0;
}
static int
ext4_xattr_block_get(struct inode *inode, int name_index, const char *name,
void *buffer, size_t buffer_size)
{
struct buffer_head *bh = NULL;
struct ext4_xattr_entry *entry;
size_t size;
int error;
struct mb_cache *ext4_mb_cache = EXT4_GET_MB_CACHE(inode);
ea_idebug(inode, "name=%d.%s, buffer=%p, buffer_size=%ld",
name_index, name, buffer, (long)buffer_size);
error = -ENODATA;
if (!EXT4_I(inode)->i_file_acl)
goto cleanup;
ea_idebug(inode, "reading block %llu",
(unsigned long long)EXT4_I(inode)->i_file_acl);
bh = sb_bread(inode->i_sb, EXT4_I(inode)->i_file_acl);
if (!bh)
goto cleanup;
ea_bdebug(bh, "b_count=%d, refcount=%d",
atomic_read(&(bh->b_count)), le32_to_cpu(BHDR(bh)->h_refcount));
if (ext4_xattr_check_block(inode, bh)) {
bad_block:
EXT4_ERROR_INODE(inode, "bad block %llu",
EXT4_I(inode)->i_file_acl);
error = -EIO;
goto cleanup;
}
ext4_xattr_cache_insert(ext4_mb_cache, bh);
entry = BFIRST(bh);
error = ext4_xattr_find_entry(&entry, name_index, name, bh->b_size, 1);
if (error == -EIO)
goto bad_block;
if (error)
goto cleanup;
size = le32_to_cpu(entry->e_value_size);
if (buffer) {
error = -ERANGE;
if (size > buffer_size)
goto cleanup;
memcpy(buffer, bh->b_data + le16_to_cpu(entry->e_value_offs),
size);
}
error = size;
cleanup:
brelse(bh);
return error;
}
int
ext4_xattr_ibody_get(struct inode *inode, int name_index, const char *name,
void *buffer, size_t buffer_size)
{
struct ext4_xattr_ibody_header *header;
struct ext4_xattr_entry *entry;
struct ext4_inode *raw_inode;
struct ext4_iloc iloc;
size_t size;
void *end;
int error;
if (!ext4_test_inode_state(inode, EXT4_STATE_XATTR))
return -ENODATA;
error = ext4_get_inode_loc(inode, &iloc);
if (error)
return error;
raw_inode = ext4_raw_inode(&iloc);
header = IHDR(inode, raw_inode);
entry = IFIRST(header);
end = (void *)raw_inode + EXT4_SB(inode->i_sb)->s_inode_size;
error = ext4_xattr_check_names(entry, end);
if (error)
goto cleanup;
error = ext4_xattr_find_entry(&entry, name_index, name,
end - (void *)entry, 0);
if (error)
goto cleanup;
size = le32_to_cpu(entry->e_value_size);
if (buffer) {
error = -ERANGE;
if (size > buffer_size)
goto cleanup;
memcpy(buffer, (void *)IFIRST(header) +
le16_to_cpu(entry->e_value_offs), size);
}
error = size;
cleanup:
brelse(iloc.bh);
return error;
}
/*
* ext4_xattr_get()
*
* Copy an extended attribute into the buffer
* provided, or compute the buffer size required.
* Buffer is NULL to compute the size of the buffer required.
*
* Returns a negative error number on failure, or the number of bytes
* used / required on success.
*/
int
ext4_xattr_get(struct inode *inode, int name_index, const char *name,
void *buffer, size_t buffer_size)
{
int error;
if (strlen(name) > 255)
return -ERANGE;
down_read(&EXT4_I(inode)->xattr_sem);
error = ext4_xattr_ibody_get(inode, name_index, name, buffer,
buffer_size);
if (error == -ENODATA)
error = ext4_xattr_block_get(inode, name_index, name, buffer,
buffer_size);
up_read(&EXT4_I(inode)->xattr_sem);
return error;
}
static int
ext4_xattr_list_entries(struct dentry *dentry, struct ext4_xattr_entry *entry,
char *buffer, size_t buffer_size)
{
size_t rest = buffer_size;
for (; !IS_LAST_ENTRY(entry); entry = EXT4_XATTR_NEXT(entry)) {
const struct xattr_handler *handler =
ext4_xattr_handler(entry->e_name_index);
if (handler) {
size_t size = handler->list(dentry, buffer, rest,
entry->e_name,
entry->e_name_len,
handler->flags);
if (buffer) {
if (size > rest)
return -ERANGE;
buffer += size;
}
rest -= size;
}
}
return buffer_size - rest;
}
static int
ext4_xattr_block_list(struct dentry *dentry, char *buffer, size_t buffer_size)
{
struct inode *inode = dentry->d_inode;
struct buffer_head *bh = NULL;
int error;
struct mb_cache *ext4_mb_cache = EXT4_GET_MB_CACHE(inode);
ea_idebug(inode, "buffer=%p, buffer_size=%ld",
buffer, (long)buffer_size);
error = 0;
if (!EXT4_I(inode)->i_file_acl)
goto cleanup;
ea_idebug(inode, "reading block %llu",
(unsigned long long)EXT4_I(inode)->i_file_acl);
bh = sb_bread(inode->i_sb, EXT4_I(inode)->i_file_acl);
error = -EIO;
if (!bh)
goto cleanup;
ea_bdebug(bh, "b_count=%d, refcount=%d",
atomic_read(&(bh->b_count)), le32_to_cpu(BHDR(bh)->h_refcount));
if (ext4_xattr_check_block(inode, bh)) {
EXT4_ERROR_INODE(inode, "bad block %llu",
EXT4_I(inode)->i_file_acl);
error = -EIO;
goto cleanup;
}
ext4_xattr_cache_insert(ext4_mb_cache, bh);
error = ext4_xattr_list_entries(dentry, BFIRST(bh), buffer, buffer_size);
cleanup:
brelse(bh);
return error;
}
static int
ext4_xattr_ibody_list(struct dentry *dentry, char *buffer, size_t buffer_size)
{
struct inode *inode = dentry->d_inode;
struct ext4_xattr_ibody_header *header;
struct ext4_inode *raw_inode;
struct ext4_iloc iloc;
void *end;
int error;
if (!ext4_test_inode_state(inode, EXT4_STATE_XATTR))
return 0;
error = ext4_get_inode_loc(inode, &iloc);
if (error)
return error;
raw_inode = ext4_raw_inode(&iloc);
header = IHDR(inode, raw_inode);
end = (void *)raw_inode + EXT4_SB(inode->i_sb)->s_inode_size;
error = ext4_xattr_check_names(IFIRST(header), end);
if (error)
goto cleanup;
error = ext4_xattr_list_entries(dentry, IFIRST(header),
buffer, buffer_size);
cleanup:
brelse(iloc.bh);
return error;
}
/*
* ext4_xattr_list()
*
* Copy a list of attribute names into the buffer
* provided, or compute the buffer size required.
* Buffer is NULL to compute the size of the buffer required.
*
* Returns a negative error number on failure, or the number of bytes
* used / required on success.
*/
static int
ext4_xattr_list(struct dentry *dentry, char *buffer, size_t buffer_size)
{
int ret, ret2;
down_read(&EXT4_I(dentry->d_inode)->xattr_sem);
ret = ret2 = ext4_xattr_ibody_list(dentry, buffer, buffer_size);
if (ret < 0)
goto errout;
if (buffer) {
buffer += ret;
buffer_size -= ret;
}
ret = ext4_xattr_block_list(dentry, buffer, buffer_size);
if (ret < 0)
goto errout;
ret += ret2;
errout:
up_read(&EXT4_I(dentry->d_inode)->xattr_sem);
return ret;
}
/*
* If the EXT4_FEATURE_COMPAT_EXT_ATTR feature of this file system is
* not set, set it.
*/
static void ext4_xattr_update_super_block(handle_t *handle,
struct super_block *sb)
{
if (EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_EXT_ATTR))
return;
BUFFER_TRACE(EXT4_SB(sb)->s_sbh, "get_write_access");
if (ext4_journal_get_write_access(handle, EXT4_SB(sb)->s_sbh) == 0) {
EXT4_SET_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_EXT_ATTR);
ext4_handle_dirty_super(handle, sb);
}
}
/*
ext4: fix jbd2 warning under heavy xattr load When heavily exercising xattr code the assertion that jbd2_journal_dirty_metadata() shouldn't return error was triggered: WARNING: at /srv/autobuild-ceph/gitbuilder.git/build/fs/jbd2/transaction.c:1237 jbd2_journal_dirty_metadata+0x1ba/0x260() CPU: 0 PID: 8877 Comm: ceph-osd Tainted: G W 3.10.0-ceph-00049-g68d04c9 #1 Hardware name: Dell Inc. PowerEdge R410/01V648, BIOS 1.6.3 02/07/2011 ffffffff81a1d3c8 ffff880214469928 ffffffff816311b0 ffff880214469968 ffffffff8103fae0 ffff880214469958 ffff880170a9dc30 ffff8802240fbe80 0000000000000000 ffff88020b366000 ffff8802256e7510 ffff880214469978 Call Trace: [<ffffffff816311b0>] dump_stack+0x19/0x1b [<ffffffff8103fae0>] warn_slowpath_common+0x70/0xa0 [<ffffffff8103fb2a>] warn_slowpath_null+0x1a/0x20 [<ffffffff81267c2a>] jbd2_journal_dirty_metadata+0x1ba/0x260 [<ffffffff81245093>] __ext4_handle_dirty_metadata+0xa3/0x140 [<ffffffff812561f3>] ext4_xattr_release_block+0x103/0x1f0 [<ffffffff81256680>] ext4_xattr_block_set+0x1e0/0x910 [<ffffffff8125795b>] ext4_xattr_set_handle+0x38b/0x4a0 [<ffffffff810a319d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff81257b32>] ext4_xattr_set+0xc2/0x140 [<ffffffff81258547>] ext4_xattr_user_set+0x47/0x50 [<ffffffff811935ce>] generic_setxattr+0x6e/0x90 [<ffffffff81193ecb>] __vfs_setxattr_noperm+0x7b/0x1c0 [<ffffffff811940d4>] vfs_setxattr+0xc4/0xd0 [<ffffffff8119421e>] setxattr+0x13e/0x1e0 [<ffffffff811719c7>] ? __sb_start_write+0xe7/0x1b0 [<ffffffff8118f2e8>] ? mnt_want_write_file+0x28/0x60 [<ffffffff8118c65c>] ? fget_light+0x3c/0x130 [<ffffffff8118f2e8>] ? mnt_want_write_file+0x28/0x60 [<ffffffff8118f1f8>] ? __mnt_want_write+0x58/0x70 [<ffffffff811946be>] SyS_fsetxattr+0xbe/0x100 [<ffffffff816407c2>] system_call_fastpath+0x16/0x1b The reason for the warning is that buffer_head passed into jbd2_journal_dirty_metadata() didn't have journal_head attached. This is caused by the following race of two ext4_xattr_release_block() calls: CPU1 CPU2 ext4_xattr_release_block() ext4_xattr_release_block() lock_buffer(bh); /* False */ if (BHDR(bh)->h_refcount == cpu_to_le32(1)) } else { le32_add_cpu(&BHDR(bh)->h_refcount, -1); unlock_buffer(bh); lock_buffer(bh); /* True */ if (BHDR(bh)->h_refcount == cpu_to_le32(1)) get_bh(bh); ext4_free_blocks() ... jbd2_journal_forget() jbd2_journal_unfile_buffer() -> JH is gone error = ext4_handle_dirty_xattr_block(handle, inode, bh); -> triggers the warning We fix the problem by moving ext4_handle_dirty_xattr_block() under the buffer lock. Sadly this cannot be done in nojournal mode as that function can call sync_dirty_buffer() which would deadlock. Luckily in nojournal mode the race is harmless (we only dirty already freed buffer) and thus for nojournal mode we leave the dirtying outside of the buffer lock. Reported-by: Sage Weil <sage@inktank.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
2014-04-07 18:54:21 +04:00
* Release the xattr block BH: If the reference count is > 1, decrement it;
* otherwise free the block.
*/
static void
ext4_xattr_release_block(handle_t *handle, struct inode *inode,
struct buffer_head *bh)
{
struct mb_cache_entry *ce = NULL;
[PATCH] ext[34]: EA block reference count racing fix There are race issues around ext[34] xattr block release code. ext[34]_xattr_release_block() checks the reference count of xattr block (h_refcount) and frees that xattr block if it is the last one reference it. Unlike ext2, the check of this counter is unprotected by any lock. ext[34]_xattr_release_block() will free the mb_cache entry before freeing that xattr block. There is a small window between the check for the re h_refcount ==1 and the call to mb_cache_entry_free(). During this small window another inode might find this xattr block from the mbcache and reuse it, racing a refcount updates. The xattr block will later be freed by the first inode without notice other inode is still use it. Later if that block is reallocated as a datablock for other file, then more serious problem might happen. We need put a lock around places checking the refount as well to avoid racing issue. Another place need this kind of protection is in ext3_xattr_block_set(), where it will modify the xattr block content in- the-fly if the refcount is 1 (means it's the only inode reference it). This will also fix another issue: the xattr block may not get freed at all if no lock is to protect the refcount check at the release time. It is possible that the last two inodes could release the shared xattr block at the same time. But both of them think they are not the last one so only decreased the h_refcount without freeing xattr block at all. We need to call lock_buffer() after ext3_journal_get_write_access() to avoid deadlock (because the later will call lock_buffer()/unlock_buffer () as well). Signed-off-by: Mingming Cao <cmm@us.ibm.com> Cc: Andreas Gruenbacher <agruen@suse.de> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01 07:13:35 +03:00
int error = 0;
struct mb_cache *ext4_mb_cache = EXT4_GET_MB_CACHE(inode);
ce = mb_cache_entry_get(ext4_mb_cache, bh->b_bdev, bh->b_blocknr);
BUFFER_TRACE(bh, "get_write_access");
[PATCH] ext[34]: EA block reference count racing fix There are race issues around ext[34] xattr block release code. ext[34]_xattr_release_block() checks the reference count of xattr block (h_refcount) and frees that xattr block if it is the last one reference it. Unlike ext2, the check of this counter is unprotected by any lock. ext[34]_xattr_release_block() will free the mb_cache entry before freeing that xattr block. There is a small window between the check for the re h_refcount ==1 and the call to mb_cache_entry_free(). During this small window another inode might find this xattr block from the mbcache and reuse it, racing a refcount updates. The xattr block will later be freed by the first inode without notice other inode is still use it. Later if that block is reallocated as a datablock for other file, then more serious problem might happen. We need put a lock around places checking the refount as well to avoid racing issue. Another place need this kind of protection is in ext3_xattr_block_set(), where it will modify the xattr block content in- the-fly if the refcount is 1 (means it's the only inode reference it). This will also fix another issue: the xattr block may not get freed at all if no lock is to protect the refcount check at the release time. It is possible that the last two inodes could release the shared xattr block at the same time. But both of them think they are not the last one so only decreased the h_refcount without freeing xattr block at all. We need to call lock_buffer() after ext3_journal_get_write_access() to avoid deadlock (because the later will call lock_buffer()/unlock_buffer () as well). Signed-off-by: Mingming Cao <cmm@us.ibm.com> Cc: Andreas Gruenbacher <agruen@suse.de> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01 07:13:35 +03:00
error = ext4_journal_get_write_access(handle, bh);
if (error)
goto out;
lock_buffer(bh);
if (BHDR(bh)->h_refcount == cpu_to_le32(1)) {
ea_bdebug(bh, "refcount now=0; freeing");
if (ce)
mb_cache_entry_free(ce);
get_bh(bh);
ext4: fix jbd2 warning under heavy xattr load When heavily exercising xattr code the assertion that jbd2_journal_dirty_metadata() shouldn't return error was triggered: WARNING: at /srv/autobuild-ceph/gitbuilder.git/build/fs/jbd2/transaction.c:1237 jbd2_journal_dirty_metadata+0x1ba/0x260() CPU: 0 PID: 8877 Comm: ceph-osd Tainted: G W 3.10.0-ceph-00049-g68d04c9 #1 Hardware name: Dell Inc. PowerEdge R410/01V648, BIOS 1.6.3 02/07/2011 ffffffff81a1d3c8 ffff880214469928 ffffffff816311b0 ffff880214469968 ffffffff8103fae0 ffff880214469958 ffff880170a9dc30 ffff8802240fbe80 0000000000000000 ffff88020b366000 ffff8802256e7510 ffff880214469978 Call Trace: [<ffffffff816311b0>] dump_stack+0x19/0x1b [<ffffffff8103fae0>] warn_slowpath_common+0x70/0xa0 [<ffffffff8103fb2a>] warn_slowpath_null+0x1a/0x20 [<ffffffff81267c2a>] jbd2_journal_dirty_metadata+0x1ba/0x260 [<ffffffff81245093>] __ext4_handle_dirty_metadata+0xa3/0x140 [<ffffffff812561f3>] ext4_xattr_release_block+0x103/0x1f0 [<ffffffff81256680>] ext4_xattr_block_set+0x1e0/0x910 [<ffffffff8125795b>] ext4_xattr_set_handle+0x38b/0x4a0 [<ffffffff810a319d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff81257b32>] ext4_xattr_set+0xc2/0x140 [<ffffffff81258547>] ext4_xattr_user_set+0x47/0x50 [<ffffffff811935ce>] generic_setxattr+0x6e/0x90 [<ffffffff81193ecb>] __vfs_setxattr_noperm+0x7b/0x1c0 [<ffffffff811940d4>] vfs_setxattr+0xc4/0xd0 [<ffffffff8119421e>] setxattr+0x13e/0x1e0 [<ffffffff811719c7>] ? __sb_start_write+0xe7/0x1b0 [<ffffffff8118f2e8>] ? mnt_want_write_file+0x28/0x60 [<ffffffff8118c65c>] ? fget_light+0x3c/0x130 [<ffffffff8118f2e8>] ? mnt_want_write_file+0x28/0x60 [<ffffffff8118f1f8>] ? __mnt_want_write+0x58/0x70 [<ffffffff811946be>] SyS_fsetxattr+0xbe/0x100 [<ffffffff816407c2>] system_call_fastpath+0x16/0x1b The reason for the warning is that buffer_head passed into jbd2_journal_dirty_metadata() didn't have journal_head attached. This is caused by the following race of two ext4_xattr_release_block() calls: CPU1 CPU2 ext4_xattr_release_block() ext4_xattr_release_block() lock_buffer(bh); /* False */ if (BHDR(bh)->h_refcount == cpu_to_le32(1)) } else { le32_add_cpu(&BHDR(bh)->h_refcount, -1); unlock_buffer(bh); lock_buffer(bh); /* True */ if (BHDR(bh)->h_refcount == cpu_to_le32(1)) get_bh(bh); ext4_free_blocks() ... jbd2_journal_forget() jbd2_journal_unfile_buffer() -> JH is gone error = ext4_handle_dirty_xattr_block(handle, inode, bh); -> triggers the warning We fix the problem by moving ext4_handle_dirty_xattr_block() under the buffer lock. Sadly this cannot be done in nojournal mode as that function can call sync_dirty_buffer() which would deadlock. Luckily in nojournal mode the race is harmless (we only dirty already freed buffer) and thus for nojournal mode we leave the dirtying outside of the buffer lock. Reported-by: Sage Weil <sage@inktank.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
2014-04-07 18:54:21 +04:00
unlock_buffer(bh);
ext4_free_blocks(handle, inode, bh, 0, 1,
EXT4_FREE_BLOCKS_METADATA |
EXT4_FREE_BLOCKS_FORGET);
} else {
le32_add_cpu(&BHDR(bh)->h_refcount, -1);
if (ce)
mb_cache_entry_release(ce);
ext4: fix jbd2 warning under heavy xattr load When heavily exercising xattr code the assertion that jbd2_journal_dirty_metadata() shouldn't return error was triggered: WARNING: at /srv/autobuild-ceph/gitbuilder.git/build/fs/jbd2/transaction.c:1237 jbd2_journal_dirty_metadata+0x1ba/0x260() CPU: 0 PID: 8877 Comm: ceph-osd Tainted: G W 3.10.0-ceph-00049-g68d04c9 #1 Hardware name: Dell Inc. PowerEdge R410/01V648, BIOS 1.6.3 02/07/2011 ffffffff81a1d3c8 ffff880214469928 ffffffff816311b0 ffff880214469968 ffffffff8103fae0 ffff880214469958 ffff880170a9dc30 ffff8802240fbe80 0000000000000000 ffff88020b366000 ffff8802256e7510 ffff880214469978 Call Trace: [<ffffffff816311b0>] dump_stack+0x19/0x1b [<ffffffff8103fae0>] warn_slowpath_common+0x70/0xa0 [<ffffffff8103fb2a>] warn_slowpath_null+0x1a/0x20 [<ffffffff81267c2a>] jbd2_journal_dirty_metadata+0x1ba/0x260 [<ffffffff81245093>] __ext4_handle_dirty_metadata+0xa3/0x140 [<ffffffff812561f3>] ext4_xattr_release_block+0x103/0x1f0 [<ffffffff81256680>] ext4_xattr_block_set+0x1e0/0x910 [<ffffffff8125795b>] ext4_xattr_set_handle+0x38b/0x4a0 [<ffffffff810a319d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff81257b32>] ext4_xattr_set+0xc2/0x140 [<ffffffff81258547>] ext4_xattr_user_set+0x47/0x50 [<ffffffff811935ce>] generic_setxattr+0x6e/0x90 [<ffffffff81193ecb>] __vfs_setxattr_noperm+0x7b/0x1c0 [<ffffffff811940d4>] vfs_setxattr+0xc4/0xd0 [<ffffffff8119421e>] setxattr+0x13e/0x1e0 [<ffffffff811719c7>] ? __sb_start_write+0xe7/0x1b0 [<ffffffff8118f2e8>] ? mnt_want_write_file+0x28/0x60 [<ffffffff8118c65c>] ? fget_light+0x3c/0x130 [<ffffffff8118f2e8>] ? mnt_want_write_file+0x28/0x60 [<ffffffff8118f1f8>] ? __mnt_want_write+0x58/0x70 [<ffffffff811946be>] SyS_fsetxattr+0xbe/0x100 [<ffffffff816407c2>] system_call_fastpath+0x16/0x1b The reason for the warning is that buffer_head passed into jbd2_journal_dirty_metadata() didn't have journal_head attached. This is caused by the following race of two ext4_xattr_release_block() calls: CPU1 CPU2 ext4_xattr_release_block() ext4_xattr_release_block() lock_buffer(bh); /* False */ if (BHDR(bh)->h_refcount == cpu_to_le32(1)) } else { le32_add_cpu(&BHDR(bh)->h_refcount, -1); unlock_buffer(bh); lock_buffer(bh); /* True */ if (BHDR(bh)->h_refcount == cpu_to_le32(1)) get_bh(bh); ext4_free_blocks() ... jbd2_journal_forget() jbd2_journal_unfile_buffer() -> JH is gone error = ext4_handle_dirty_xattr_block(handle, inode, bh); -> triggers the warning We fix the problem by moving ext4_handle_dirty_xattr_block() under the buffer lock. Sadly this cannot be done in nojournal mode as that function can call sync_dirty_buffer() which would deadlock. Luckily in nojournal mode the race is harmless (we only dirty already freed buffer) and thus for nojournal mode we leave the dirtying outside of the buffer lock. Reported-by: Sage Weil <sage@inktank.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
2014-04-07 18:54:21 +04:00
/*
* Beware of this ugliness: Releasing of xattr block references
* from different inodes can race and so we have to protect
* from a race where someone else frees the block (and releases
* its journal_head) before we are done dirtying the buffer. In
* nojournal mode this race is harmless and we actually cannot
* call ext4_handle_dirty_xattr_block() with locked buffer as
* that function can call sync_dirty_buffer() so for that case
* we handle the dirtying after unlocking the buffer.
*/
if (ext4_handle_valid(handle))
error = ext4_handle_dirty_xattr_block(handle, inode,
bh);
unlock_buffer(bh);
ext4: fix jbd2 warning under heavy xattr load When heavily exercising xattr code the assertion that jbd2_journal_dirty_metadata() shouldn't return error was triggered: WARNING: at /srv/autobuild-ceph/gitbuilder.git/build/fs/jbd2/transaction.c:1237 jbd2_journal_dirty_metadata+0x1ba/0x260() CPU: 0 PID: 8877 Comm: ceph-osd Tainted: G W 3.10.0-ceph-00049-g68d04c9 #1 Hardware name: Dell Inc. PowerEdge R410/01V648, BIOS 1.6.3 02/07/2011 ffffffff81a1d3c8 ffff880214469928 ffffffff816311b0 ffff880214469968 ffffffff8103fae0 ffff880214469958 ffff880170a9dc30 ffff8802240fbe80 0000000000000000 ffff88020b366000 ffff8802256e7510 ffff880214469978 Call Trace: [<ffffffff816311b0>] dump_stack+0x19/0x1b [<ffffffff8103fae0>] warn_slowpath_common+0x70/0xa0 [<ffffffff8103fb2a>] warn_slowpath_null+0x1a/0x20 [<ffffffff81267c2a>] jbd2_journal_dirty_metadata+0x1ba/0x260 [<ffffffff81245093>] __ext4_handle_dirty_metadata+0xa3/0x140 [<ffffffff812561f3>] ext4_xattr_release_block+0x103/0x1f0 [<ffffffff81256680>] ext4_xattr_block_set+0x1e0/0x910 [<ffffffff8125795b>] ext4_xattr_set_handle+0x38b/0x4a0 [<ffffffff810a319d>] ? trace_hardirqs_on+0xd/0x10 [<ffffffff81257b32>] ext4_xattr_set+0xc2/0x140 [<ffffffff81258547>] ext4_xattr_user_set+0x47/0x50 [<ffffffff811935ce>] generic_setxattr+0x6e/0x90 [<ffffffff81193ecb>] __vfs_setxattr_noperm+0x7b/0x1c0 [<ffffffff811940d4>] vfs_setxattr+0xc4/0xd0 [<ffffffff8119421e>] setxattr+0x13e/0x1e0 [<ffffffff811719c7>] ? __sb_start_write+0xe7/0x1b0 [<ffffffff8118f2e8>] ? mnt_want_write_file+0x28/0x60 [<ffffffff8118c65c>] ? fget_light+0x3c/0x130 [<ffffffff8118f2e8>] ? mnt_want_write_file+0x28/0x60 [<ffffffff8118f1f8>] ? __mnt_want_write+0x58/0x70 [<ffffffff811946be>] SyS_fsetxattr+0xbe/0x100 [<ffffffff816407c2>] system_call_fastpath+0x16/0x1b The reason for the warning is that buffer_head passed into jbd2_journal_dirty_metadata() didn't have journal_head attached. This is caused by the following race of two ext4_xattr_release_block() calls: CPU1 CPU2 ext4_xattr_release_block() ext4_xattr_release_block() lock_buffer(bh); /* False */ if (BHDR(bh)->h_refcount == cpu_to_le32(1)) } else { le32_add_cpu(&BHDR(bh)->h_refcount, -1); unlock_buffer(bh); lock_buffer(bh); /* True */ if (BHDR(bh)->h_refcount == cpu_to_le32(1)) get_bh(bh); ext4_free_blocks() ... jbd2_journal_forget() jbd2_journal_unfile_buffer() -> JH is gone error = ext4_handle_dirty_xattr_block(handle, inode, bh); -> triggers the warning We fix the problem by moving ext4_handle_dirty_xattr_block() under the buffer lock. Sadly this cannot be done in nojournal mode as that function can call sync_dirty_buffer() which would deadlock. Luckily in nojournal mode the race is harmless (we only dirty already freed buffer) and thus for nojournal mode we leave the dirtying outside of the buffer lock. Reported-by: Sage Weil <sage@inktank.com> Signed-off-by: Jan Kara <jack@suse.cz> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@vger.kernel.org
2014-04-07 18:54:21 +04:00
if (!ext4_handle_valid(handle))
error = ext4_handle_dirty_xattr_block(handle, inode,
bh);
[PATCH] ext[34]: EA block reference count racing fix There are race issues around ext[34] xattr block release code. ext[34]_xattr_release_block() checks the reference count of xattr block (h_refcount) and frees that xattr block if it is the last one reference it. Unlike ext2, the check of this counter is unprotected by any lock. ext[34]_xattr_release_block() will free the mb_cache entry before freeing that xattr block. There is a small window between the check for the re h_refcount ==1 and the call to mb_cache_entry_free(). During this small window another inode might find this xattr block from the mbcache and reuse it, racing a refcount updates. The xattr block will later be freed by the first inode without notice other inode is still use it. Later if that block is reallocated as a datablock for other file, then more serious problem might happen. We need put a lock around places checking the refount as well to avoid racing issue. Another place need this kind of protection is in ext3_xattr_block_set(), where it will modify the xattr block content in- the-fly if the refcount is 1 (means it's the only inode reference it). This will also fix another issue: the xattr block may not get freed at all if no lock is to protect the refcount check at the release time. It is possible that the last two inodes could release the shared xattr block at the same time. But both of them think they are not the last one so only decreased the h_refcount without freeing xattr block at all. We need to call lock_buffer() after ext3_journal_get_write_access() to avoid deadlock (because the later will call lock_buffer()/unlock_buffer () as well). Signed-off-by: Mingming Cao <cmm@us.ibm.com> Cc: Andreas Gruenbacher <agruen@suse.de> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01 07:13:35 +03:00
if (IS_SYNC(inode))
ext4_handle_sync(handle);
dquot_free_block(inode, EXT4_C2B(EXT4_SB(inode->i_sb), 1));
[PATCH] ext[34]: EA block reference count racing fix There are race issues around ext[34] xattr block release code. ext[34]_xattr_release_block() checks the reference count of xattr block (h_refcount) and frees that xattr block if it is the last one reference it. Unlike ext2, the check of this counter is unprotected by any lock. ext[34]_xattr_release_block() will free the mb_cache entry before freeing that xattr block. There is a small window between the check for the re h_refcount ==1 and the call to mb_cache_entry_free(). During this small window another inode might find this xattr block from the mbcache and reuse it, racing a refcount updates. The xattr block will later be freed by the first inode without notice other inode is still use it. Later if that block is reallocated as a datablock for other file, then more serious problem might happen. We need put a lock around places checking the refount as well to avoid racing issue. Another place need this kind of protection is in ext3_xattr_block_set(), where it will modify the xattr block content in- the-fly if the refcount is 1 (means it's the only inode reference it). This will also fix another issue: the xattr block may not get freed at all if no lock is to protect the refcount check at the release time. It is possible that the last two inodes could release the shared xattr block at the same time. But both of them think they are not the last one so only decreased the h_refcount without freeing xattr block at all. We need to call lock_buffer() after ext3_journal_get_write_access() to avoid deadlock (because the later will call lock_buffer()/unlock_buffer () as well). Signed-off-by: Mingming Cao <cmm@us.ibm.com> Cc: Andreas Gruenbacher <agruen@suse.de> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01 07:13:35 +03:00
ea_bdebug(bh, "refcount now=%d; releasing",
le32_to_cpu(BHDR(bh)->h_refcount));
}
[PATCH] ext[34]: EA block reference count racing fix There are race issues around ext[34] xattr block release code. ext[34]_xattr_release_block() checks the reference count of xattr block (h_refcount) and frees that xattr block if it is the last one reference it. Unlike ext2, the check of this counter is unprotected by any lock. ext[34]_xattr_release_block() will free the mb_cache entry before freeing that xattr block. There is a small window between the check for the re h_refcount ==1 and the call to mb_cache_entry_free(). During this small window another inode might find this xattr block from the mbcache and reuse it, racing a refcount updates. The xattr block will later be freed by the first inode without notice other inode is still use it. Later if that block is reallocated as a datablock for other file, then more serious problem might happen. We need put a lock around places checking the refount as well to avoid racing issue. Another place need this kind of protection is in ext3_xattr_block_set(), where it will modify the xattr block content in- the-fly if the refcount is 1 (means it's the only inode reference it). This will also fix another issue: the xattr block may not get freed at all if no lock is to protect the refcount check at the release time. It is possible that the last two inodes could release the shared xattr block at the same time. But both of them think they are not the last one so only decreased the h_refcount without freeing xattr block at all. We need to call lock_buffer() after ext3_journal_get_write_access() to avoid deadlock (because the later will call lock_buffer()/unlock_buffer () as well). Signed-off-by: Mingming Cao <cmm@us.ibm.com> Cc: Andreas Gruenbacher <agruen@suse.de> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01 07:13:35 +03:00
out:
ext4_std_error(inode->i_sb, error);
return;
}
ext4: Expand extra_inodes space per the s_{want,min}_extra_isize fields We need to make sure that existing ext3 filesystems can also avail the new fields that have been added to the ext4 inode. We use s_want_extra_isize and s_min_extra_isize to decide by how much we should expand the inode. If EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE feature is set then we expand the inode by max(s_want_extra_isize, s_min_extra_isize , sizeof(ext4_inode) - EXT4_GOOD_OLD_INODE_SIZE) bytes. Actually it is still an open question about whether users should be able to set s_*_extra_isize smaller than the known fields or not. This patch also adds the functionality to expand inodes to include the newly added fields. We start by trying to expand by s_want_extra_isize bytes and if its fails we try to expand by s_min_extra_isize bytes. This is done by changing the i_extra_isize if enough space is available in the inode and no EAs are present. If EAs are present and there is enough space in the inode then the EAs in the inode are shifted to make space. If enough space is not available in the inode due to the EAs then 1 or more EAs are shifted to the external EA block. In the worst case when even the external EA block does not have enough space we inform the user that some EA would need to be deleted or s_min_extra_isize would have to be reduced. Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Kalpak Shah <kalpak@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2007-07-18 17:19:57 +04:00
/*
* Find the available free space for EAs. This also returns the total number of
* bytes used by EA entries.
*/
static size_t ext4_xattr_free_space(struct ext4_xattr_entry *last,
size_t *min_offs, void *base, int *total)
{
for (; !IS_LAST_ENTRY(last); last = EXT4_XATTR_NEXT(last)) {
if (!last->e_value_block && last->e_value_size) {
size_t offs = le16_to_cpu(last->e_value_offs);
if (offs < *min_offs)
*min_offs = offs;
}
if (total)
*total += EXT4_XATTR_LEN(last->e_name_len);
ext4: Expand extra_inodes space per the s_{want,min}_extra_isize fields We need to make sure that existing ext3 filesystems can also avail the new fields that have been added to the ext4 inode. We use s_want_extra_isize and s_min_extra_isize to decide by how much we should expand the inode. If EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE feature is set then we expand the inode by max(s_want_extra_isize, s_min_extra_isize , sizeof(ext4_inode) - EXT4_GOOD_OLD_INODE_SIZE) bytes. Actually it is still an open question about whether users should be able to set s_*_extra_isize smaller than the known fields or not. This patch also adds the functionality to expand inodes to include the newly added fields. We start by trying to expand by s_want_extra_isize bytes and if its fails we try to expand by s_min_extra_isize bytes. This is done by changing the i_extra_isize if enough space is available in the inode and no EAs are present. If EAs are present and there is enough space in the inode then the EAs in the inode are shifted to make space. If enough space is not available in the inode due to the EAs then 1 or more EAs are shifted to the external EA block. In the worst case when even the external EA block does not have enough space we inform the user that some EA would need to be deleted or s_min_extra_isize would have to be reduced. Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Kalpak Shah <kalpak@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2007-07-18 17:19:57 +04:00
}
return (*min_offs - ((void *)last - base) - sizeof(__u32));
}
static int
ext4_xattr_set_entry(struct ext4_xattr_info *i, struct ext4_xattr_search *s)
{
struct ext4_xattr_entry *last;
size_t free, min_offs = s->end - s->base, name_len = strlen(i->name);
/* Compute min_offs and last. */
last = s->first;
for (; !IS_LAST_ENTRY(last); last = EXT4_XATTR_NEXT(last)) {
if (!last->e_value_block && last->e_value_size) {
size_t offs = le16_to_cpu(last->e_value_offs);
if (offs < min_offs)
min_offs = offs;
}
}
free = min_offs - ((void *)last - s->base) - sizeof(__u32);
if (!s->not_found) {
if (!s->here->e_value_block && s->here->e_value_size) {
size_t size = le32_to_cpu(s->here->e_value_size);
free += EXT4_XATTR_SIZE(size);
}
free += EXT4_XATTR_LEN(name_len);
}
if (i->value) {
if (free < EXT4_XATTR_SIZE(i->value_len) ||
free < EXT4_XATTR_LEN(name_len) +
EXT4_XATTR_SIZE(i->value_len))
return -ENOSPC;
}
if (i->value && s->not_found) {
/* Insert the new name. */
size_t size = EXT4_XATTR_LEN(name_len);
size_t rest = (void *)last - (void *)s->here + sizeof(__u32);
memmove((void *)s->here + size, s->here, rest);
memset(s->here, 0, size);
s->here->e_name_index = i->name_index;
s->here->e_name_len = name_len;
memcpy(s->here->e_name, i->name, name_len);
} else {
if (!s->here->e_value_block && s->here->e_value_size) {
void *first_val = s->base + min_offs;
size_t offs = le16_to_cpu(s->here->e_value_offs);
void *val = s->base + offs;
size_t size = EXT4_XATTR_SIZE(
le32_to_cpu(s->here->e_value_size));
if (i->value && size == EXT4_XATTR_SIZE(i->value_len)) {
/* The old and the new value have the same
size. Just replace. */
s->here->e_value_size =
cpu_to_le32(i->value_len);
if (i->value == EXT4_ZERO_XATTR_VALUE) {
memset(val, 0, size);
} else {
/* Clear pad bytes first. */
memset(val + size - EXT4_XATTR_PAD, 0,
EXT4_XATTR_PAD);
memcpy(val, i->value, i->value_len);
}
return 0;
}
/* Remove the old value. */
memmove(first_val + size, first_val, val - first_val);
memset(first_val, 0, size);
s->here->e_value_size = 0;
s->here->e_value_offs = 0;
min_offs += size;
/* Adjust all value offsets. */
last = s->first;
while (!IS_LAST_ENTRY(last)) {
size_t o = le16_to_cpu(last->e_value_offs);
if (!last->e_value_block &&
last->e_value_size && o < offs)
last->e_value_offs =
cpu_to_le16(o + size);
last = EXT4_XATTR_NEXT(last);
}
}
if (!i->value) {
/* Remove the old name. */
size_t size = EXT4_XATTR_LEN(name_len);
last = ENTRY((void *)last - size);
memmove(s->here, (void *)s->here + size,
(void *)last - (void *)s->here + sizeof(__u32));
memset(last, 0, size);
}
}
if (i->value) {
/* Insert the new value. */
s->here->e_value_size = cpu_to_le32(i->value_len);
if (i->value_len) {
size_t size = EXT4_XATTR_SIZE(i->value_len);
void *val = s->base + min_offs - size;
s->here->e_value_offs = cpu_to_le16(min_offs - size);
if (i->value == EXT4_ZERO_XATTR_VALUE) {
memset(val, 0, size);
} else {
/* Clear the pad bytes first. */
memset(val + size - EXT4_XATTR_PAD, 0,
EXT4_XATTR_PAD);
memcpy(val, i->value, i->value_len);
}
}
}
return 0;
}
struct ext4_xattr_block_find {
struct ext4_xattr_search s;
struct buffer_head *bh;
};
static int
ext4_xattr_block_find(struct inode *inode, struct ext4_xattr_info *i,
struct ext4_xattr_block_find *bs)
{
struct super_block *sb = inode->i_sb;
int error;
ea_idebug(inode, "name=%d.%s, value=%p, value_len=%ld",
i->name_index, i->name, i->value, (long)i->value_len);
if (EXT4_I(inode)->i_file_acl) {
/* The inode already has an extended attribute block. */
bs->bh = sb_bread(sb, EXT4_I(inode)->i_file_acl);
error = -EIO;
if (!bs->bh)
goto cleanup;
ea_bdebug(bs->bh, "b_count=%d, refcount=%d",
atomic_read(&(bs->bh->b_count)),
le32_to_cpu(BHDR(bs->bh)->h_refcount));
if (ext4_xattr_check_block(inode, bs->bh)) {
EXT4_ERROR_INODE(inode, "bad block %llu",
EXT4_I(inode)->i_file_acl);
error = -EIO;
goto cleanup;
}
/* Find the named attribute. */
bs->s.base = BHDR(bs->bh);
bs->s.first = BFIRST(bs->bh);
bs->s.end = bs->bh->b_data + bs->bh->b_size;
bs->s.here = bs->s.first;
error = ext4_xattr_find_entry(&bs->s.here, i->name_index,
i->name, bs->bh->b_size, 1);
if (error && error != -ENODATA)
goto cleanup;
bs->s.not_found = error;
}
error = 0;
cleanup:
return error;
}
static int
ext4_xattr_block_set(handle_t *handle, struct inode *inode,
struct ext4_xattr_info *i,
struct ext4_xattr_block_find *bs)
{
struct super_block *sb = inode->i_sb;
struct buffer_head *new_bh = NULL;
struct ext4_xattr_search *s = &bs->s;
struct mb_cache_entry *ce = NULL;
[PATCH] ext[34]: EA block reference count racing fix There are race issues around ext[34] xattr block release code. ext[34]_xattr_release_block() checks the reference count of xattr block (h_refcount) and frees that xattr block if it is the last one reference it. Unlike ext2, the check of this counter is unprotected by any lock. ext[34]_xattr_release_block() will free the mb_cache entry before freeing that xattr block. There is a small window between the check for the re h_refcount ==1 and the call to mb_cache_entry_free(). During this small window another inode might find this xattr block from the mbcache and reuse it, racing a refcount updates. The xattr block will later be freed by the first inode without notice other inode is still use it. Later if that block is reallocated as a datablock for other file, then more serious problem might happen. We need put a lock around places checking the refount as well to avoid racing issue. Another place need this kind of protection is in ext3_xattr_block_set(), where it will modify the xattr block content in- the-fly if the refcount is 1 (means it's the only inode reference it). This will also fix another issue: the xattr block may not get freed at all if no lock is to protect the refcount check at the release time. It is possible that the last two inodes could release the shared xattr block at the same time. But both of them think they are not the last one so only decreased the h_refcount without freeing xattr block at all. We need to call lock_buffer() after ext3_journal_get_write_access() to avoid deadlock (because the later will call lock_buffer()/unlock_buffer () as well). Signed-off-by: Mingming Cao <cmm@us.ibm.com> Cc: Andreas Gruenbacher <agruen@suse.de> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01 07:13:35 +03:00
int error = 0;
struct mb_cache *ext4_mb_cache = EXT4_GET_MB_CACHE(inode);
#define header(x) ((struct ext4_xattr_header *)(x))
if (i->value && i->value_len > sb->s_blocksize)
return -ENOSPC;
if (s->base) {
ce = mb_cache_entry_get(ext4_mb_cache, bs->bh->b_bdev,
bs->bh->b_blocknr);
BUFFER_TRACE(bs->bh, "get_write_access");
[PATCH] ext[34]: EA block reference count racing fix There are race issues around ext[34] xattr block release code. ext[34]_xattr_release_block() checks the reference count of xattr block (h_refcount) and frees that xattr block if it is the last one reference it. Unlike ext2, the check of this counter is unprotected by any lock. ext[34]_xattr_release_block() will free the mb_cache entry before freeing that xattr block. There is a small window between the check for the re h_refcount ==1 and the call to mb_cache_entry_free(). During this small window another inode might find this xattr block from the mbcache and reuse it, racing a refcount updates. The xattr block will later be freed by the first inode without notice other inode is still use it. Later if that block is reallocated as a datablock for other file, then more serious problem might happen. We need put a lock around places checking the refount as well to avoid racing issue. Another place need this kind of protection is in ext3_xattr_block_set(), where it will modify the xattr block content in- the-fly if the refcount is 1 (means it's the only inode reference it). This will also fix another issue: the xattr block may not get freed at all if no lock is to protect the refcount check at the release time. It is possible that the last two inodes could release the shared xattr block at the same time. But both of them think they are not the last one so only decreased the h_refcount without freeing xattr block at all. We need to call lock_buffer() after ext3_journal_get_write_access() to avoid deadlock (because the later will call lock_buffer()/unlock_buffer () as well). Signed-off-by: Mingming Cao <cmm@us.ibm.com> Cc: Andreas Gruenbacher <agruen@suse.de> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01 07:13:35 +03:00
error = ext4_journal_get_write_access(handle, bs->bh);
if (error)
goto cleanup;
lock_buffer(bs->bh);
if (header(s->base)->h_refcount == cpu_to_le32(1)) {
if (ce) {
mb_cache_entry_free(ce);
ce = NULL;
}
ea_bdebug(bs->bh, "modifying in-place");
error = ext4_xattr_set_entry(i, s);
if (!error) {
if (!IS_LAST_ENTRY(s->first))
ext4_xattr_rehash(header(s->base),
s->here);
ext4_xattr_cache_insert(ext4_mb_cache,
bs->bh);
}
unlock_buffer(bs->bh);
if (error == -EIO)
goto bad_block;
if (!error)
error = ext4_handle_dirty_xattr_block(handle,
inode,
bs->bh);
if (error)
goto cleanup;
goto inserted;
} else {
int offset = (char *)s->here - bs->bh->b_data;
[PATCH] ext[34]: EA block reference count racing fix There are race issues around ext[34] xattr block release code. ext[34]_xattr_release_block() checks the reference count of xattr block (h_refcount) and frees that xattr block if it is the last one reference it. Unlike ext2, the check of this counter is unprotected by any lock. ext[34]_xattr_release_block() will free the mb_cache entry before freeing that xattr block. There is a small window between the check for the re h_refcount ==1 and the call to mb_cache_entry_free(). During this small window another inode might find this xattr block from the mbcache and reuse it, racing a refcount updates. The xattr block will later be freed by the first inode without notice other inode is still use it. Later if that block is reallocated as a datablock for other file, then more serious problem might happen. We need put a lock around places checking the refount as well to avoid racing issue. Another place need this kind of protection is in ext3_xattr_block_set(), where it will modify the xattr block content in- the-fly if the refcount is 1 (means it's the only inode reference it). This will also fix another issue: the xattr block may not get freed at all if no lock is to protect the refcount check at the release time. It is possible that the last two inodes could release the shared xattr block at the same time. But both of them think they are not the last one so only decreased the h_refcount without freeing xattr block at all. We need to call lock_buffer() after ext3_journal_get_write_access() to avoid deadlock (because the later will call lock_buffer()/unlock_buffer () as well). Signed-off-by: Mingming Cao <cmm@us.ibm.com> Cc: Andreas Gruenbacher <agruen@suse.de> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-01 07:13:35 +03:00
unlock_buffer(bs->bh);
if (ce) {
mb_cache_entry_release(ce);
ce = NULL;
}
ea_bdebug(bs->bh, "cloning");
s->base = kmalloc(bs->bh->b_size, GFP_NOFS);
error = -ENOMEM;
if (s->base == NULL)
goto cleanup;
memcpy(s->base, BHDR(bs->bh), bs->bh->b_size);
s->first = ENTRY(header(s->base)+1);
header(s->base)->h_refcount = cpu_to_le32(1);
s->here = ENTRY(s->base + offset);
s->end = s->base + bs->bh->b_size;
}
} else {
/* Allocate a buffer where we construct the new block. */
s->base = kzalloc(sb->s_blocksize, GFP_NOFS);
/* assert(header == s->base) */
error = -ENOMEM;
if (s->base == NULL)
goto cleanup;
header(s->base)->h_magic = cpu_to_le32(EXT4_XATTR_MAGIC);
header(s->base)->h_blocks = cpu_to_le32(1);
header(s->base)->h_refcount = cpu_to_le32(1);
s->first = ENTRY(header(s->base)+1);
s->here = ENTRY(header(s->base)+1);
s->end = s->base + sb->s_blocksize;
}
error = ext4_xattr_set_entry(i, s);
if (error == -EIO)
goto bad_block;
if (error)
goto cleanup;
if (!IS_LAST_ENTRY(s->first))
ext4_xattr_rehash(header(s->base), s->here);
inserted:
if (!IS_LAST_ENTRY(s->first)) {
new_bh = ext4_xattr_cache_find(inode, header(s->base), &ce);
if (new_bh) {
/* We found an identical block in the cache. */
if (new_bh == bs->bh)
ea_bdebug(new_bh, "keeping");
else {
/* The old block is released after updating
the inode. */
error = dquot_alloc_block(inode,
EXT4_C2B(EXT4_SB(sb), 1));
if (error)
goto cleanup;
BUFFER_TRACE(new_bh, "get_write_access");
error = ext4_journal_get_write_access(handle,
new_bh);
if (error)
goto cleanup_dquot;
lock_buffer(new_bh);
le32_add_cpu(&BHDR(new_bh)->h_refcount, 1);
ea_bdebug(new_bh, "reusing; refcount now=%d",
le32_to_cpu(BHDR(new_bh)->h_refcount));
unlock_buffer(new_bh);
error = ext4_handle_dirty_xattr_block(handle,
inode,
new_bh);
if (error)
goto cleanup_dquot;
}
mb_cache_entry_release(ce);
ce = NULL;
} else if (bs->bh && s->base == bs->bh->b_data) {
/* We were modifying this block in-place. */
ea_bdebug(bs->bh, "keeping this block");
new_bh = bs->bh;
get_bh(new_bh);
} else {
/* We need to allocate a new block */
ext4_fsblk_t goal, block;
goal = ext4_group_first_block_no(sb,
EXT4_I(inode)->i_block_group);
/* non-extent files can't have physical blocks past 2^32 */
if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)))
goal = goal & EXT4_MAX_BLOCK_FILE_PHYS;
ext4: fix race in xattr block allocation path Ceph users reported that when using Ceph on ext4, the filesystem would often become corrupted, containing inodes with incorrect i_blocks counters. I managed to reproduce this with a very hacked-up "streamtest" binary from the Ceph tree. Ceph is doing a lot of xattr writes, to out-of-inode blocks. There is also another thread which does sync_file_range and close, of the same files. The problem appears to happen due to this race: sync/flush thread xattr-set thread ----------------- ---------------- do_writepages ext4_xattr_set ext4_da_writepages ext4_xattr_set_handle mpage_da_map_blocks ext4_xattr_block_set set DELALLOC_RESERVE ext4_new_meta_blocks ext4_mb_new_blocks if (!i_delalloc_reserved_flag) vfs_dq_alloc_block ext4_get_blocks down_write(i_data_sem) set i_delalloc_reserved_flag ... up_write(i_data_sem) if (i_delalloc_reserved_flag) vfs_dq_alloc_block_nofail In other words, the sync/flush thread pops in and sets i_delalloc_reserved_flag on the inode, which makes the xattr thread think that it's in a delalloc path in ext4_new_meta_blocks(), and add the block for a second time, after already having added it once in the !i_delalloc_reserved_flag case in ext4_mb_new_blocks The real problem is that we shouldn't be using the DELALLOC_RESERVED state flag, and instead we should be passing EXT4_GET_BLOCKS_DELALLOC_RESERVE down to ext4_map_blocks() instead of using an inode state flag. We'll fix this for now with using i_data_sem to prevent this race, but this is really not the right way to fix things. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
2011-10-29 18:15:35 +04:00
/*
* take i_data_sem because we will test
* i_delalloc_reserved_flag in ext4_mb_new_blocks
*/
down_read(&EXT4_I(inode)->i_data_sem);
block = ext4_new_meta_blocks(handle, inode, goal, 0,
NULL, &error);
ext4: fix race in xattr block allocation path Ceph users reported that when using Ceph on ext4, the filesystem would often become corrupted, containing inodes with incorrect i_blocks counters. I managed to reproduce this with a very hacked-up "streamtest" binary from the Ceph tree. Ceph is doing a lot of xattr writes, to out-of-inode blocks. There is also another thread which does sync_file_range and close, of the same files. The problem appears to happen due to this race: sync/flush thread xattr-set thread ----------------- ---------------- do_writepages ext4_xattr_set ext4_da_writepages ext4_xattr_set_handle mpage_da_map_blocks ext4_xattr_block_set set DELALLOC_RESERVE ext4_new_meta_blocks ext4_mb_new_blocks if (!i_delalloc_reserved_flag) vfs_dq_alloc_block ext4_get_blocks down_write(i_data_sem) set i_delalloc_reserved_flag ... up_write(i_data_sem) if (i_delalloc_reserved_flag) vfs_dq_alloc_block_nofail In other words, the sync/flush thread pops in and sets i_delalloc_reserved_flag on the inode, which makes the xattr thread think that it's in a delalloc path in ext4_new_meta_blocks(), and add the block for a second time, after already having added it once in the !i_delalloc_reserved_flag case in ext4_mb_new_blocks The real problem is that we shouldn't be using the DELALLOC_RESERVED state flag, and instead we should be passing EXT4_GET_BLOCKS_DELALLOC_RESERVE down to ext4_map_blocks() instead of using an inode state flag. We'll fix this for now with using i_data_sem to prevent this race, but this is really not the right way to fix things. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu> Cc: stable@kernel.org
2011-10-29 18:15:35 +04:00
up_read((&EXT4_I(inode)->i_data_sem));
if (error)
goto cleanup;
if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)))
BUG_ON(block > EXT4_MAX_BLOCK_FILE_PHYS);
ea_idebug(inode, "creating block %llu",
(unsigned long long)block);
new_bh = sb_getblk(sb, block);
if (unlikely(!new_bh)) {
error = -ENOMEM;
getblk_failed:
ext4_free_blocks(handle, inode, NULL, block, 1,
EXT4_FREE_BLOCKS_METADATA);
goto cleanup;
}
lock_buffer(new_bh);
error = ext4_journal_get_create_access(handle, new_bh);
if (error) {
unlock_buffer(new_bh);
error = -EIO;
goto getblk_failed;
}
memcpy(new_bh->b_data, s->base, new_bh->b_size);
set_buffer_uptodate(new_bh);
unlock_buffer(new_bh);
ext4_xattr_cache_insert(ext4_mb_cache, new_bh);
error = ext4_handle_dirty_xattr_block(handle,
inode, new_bh);
if (error)
goto cleanup;
}
}
/* Update the inode. */
EXT4_I(inode)->i_file_acl = new_bh ? new_bh->b_blocknr : 0;
/* Drop the previous xattr block. */
if (bs->bh && bs->bh != new_bh)
ext4_xattr_release_block(handle, inode, bs->bh);
error = 0;
cleanup:
if (ce)
mb_cache_entry_release(ce);
brelse(new_bh);
if (!(bs->bh && s->base == bs->bh->b_data))
kfree(s->base);
return error;
cleanup_dquot:
dquot_free_block(inode, EXT4_C2B(EXT4_SB(sb), 1));
goto cleanup;
bad_block:
EXT4_ERROR_INODE(inode, "bad block %llu",
EXT4_I(inode)->i_file_acl);
goto cleanup;
#undef header
}
int ext4_xattr_ibody_find(struct inode *inode, struct ext4_xattr_info *i,
struct ext4_xattr_ibody_find *is)
{
struct ext4_xattr_ibody_header *header;
struct ext4_inode *raw_inode;
int error;
if (EXT4_I(inode)->i_extra_isize == 0)
return 0;
raw_inode = ext4_raw_inode(&is->iloc);
header = IHDR(inode, raw_inode);
is->s.base = is->s.first = IFIRST(header);
is->s.here = is->s.first;
is->s.end = (void *)raw_inode + EXT4_SB(inode->i_sb)->s_inode_size;
if (ext4_test_inode_state(inode, EXT4_STATE_XATTR)) {
error = ext4_xattr_check_names(IFIRST(header), is->s.end);
if (error)
return error;
/* Find the named attribute. */
error = ext4_xattr_find_entry(&is->s.here, i->name_index,
i->name, is->s.end -
(void *)is->s.base, 0);
if (error && error != -ENODATA)
return error;
is->s.not_found = error;
}
return 0;
}
int ext4_xattr_ibody_inline_set(handle_t *handle, struct inode *inode,
struct ext4_xattr_info *i,
struct ext4_xattr_ibody_find *is)
{
struct ext4_xattr_ibody_header *header;
struct ext4_xattr_search *s = &is->s;
int error;
if (EXT4_I(inode)->i_extra_isize == 0)
return -ENOSPC;
error = ext4_xattr_set_entry(i, s);
if (error) {
if (error == -ENOSPC &&
ext4_has_inline_data(inode)) {
error = ext4_try_to_evict_inline_data(handle, inode,
EXT4_XATTR_LEN(strlen(i->name) +
EXT4_XATTR_SIZE(i->value_len)));
if (error)
return error;
error = ext4_xattr_ibody_find(inode, i, is);
if (error)
return error;
error = ext4_xattr_set_entry(i, s);
}
if (error)
return error;
}
header = IHDR(inode, ext4_raw_inode(&is->iloc));
if (!IS_LAST_ENTRY(s->first)) {
header->h_magic = cpu_to_le32(EXT4_XATTR_MAGIC);
ext4_set_inode_state(inode, EXT4_STATE_XATTR);
} else {
header->h_magic = cpu_to_le32(0);
ext4_clear_inode_state(inode, EXT4_STATE_XATTR);
}
return 0;
}
static int ext4_xattr_ibody_set(handle_t *handle, struct inode *inode,
struct ext4_xattr_info *i,
struct ext4_xattr_ibody_find *is)
{
struct ext4_xattr_ibody_header *header;
struct ext4_xattr_search *s = &is->s;
int error;
if (EXT4_I(inode)->i_extra_isize == 0)
return -ENOSPC;
error = ext4_xattr_set_entry(i, s);
if (error)
return error;
header = IHDR(inode, ext4_raw_inode(&is->iloc));
if (!IS_LAST_ENTRY(s->first)) {
header->h_magic = cpu_to_le32(EXT4_XATTR_MAGIC);
ext4_set_inode_state(inode, EXT4_STATE_XATTR);
} else {
header->h_magic = cpu_to_le32(0);
ext4_clear_inode_state(inode, EXT4_STATE_XATTR);
}
return 0;
}
/*
* ext4_xattr_set_handle()
*
* Create, replace or remove an extended attribute for this inode. Value
* is NULL to remove an existing extended attribute, and non-NULL to
* either replace an existing extended attribute, or create a new extended
* attribute. The flags XATTR_REPLACE and XATTR_CREATE
* specify that an extended attribute must exist and must not exist
* previous to the call, respectively.
*
* Returns 0, or a negative error number on failure.
*/
int
ext4_xattr_set_handle(handle_t *handle, struct inode *inode, int name_index,
const char *name, const void *value, size_t value_len,
int flags)
{
struct ext4_xattr_info i = {
.name_index = name_index,
.name = name,
.value = value,
.value_len = value_len,
};
struct ext4_xattr_ibody_find is = {
.s = { .not_found = -ENODATA, },
};
struct ext4_xattr_block_find bs = {
.s = { .not_found = -ENODATA, },
};
unsigned long no_expand;
int error;
if (!name)
return -EINVAL;
if (strlen(name) > 255)
return -ERANGE;
down_write(&EXT4_I(inode)->xattr_sem);
no_expand = ext4_test_inode_state(inode, EXT4_STATE_NO_EXPAND);
ext4_set_inode_state(inode, EXT4_STATE_NO_EXPAND);
error = ext4_reserve_inode_write(handle, inode, &is.iloc);
if (error)
goto cleanup;
if (ext4_test_inode_state(inode, EXT4_STATE_NEW)) {
struct ext4_inode *raw_inode = ext4_raw_inode(&is.iloc);
memset(raw_inode, 0, EXT4_SB(inode->i_sb)->s_inode_size);
ext4_clear_inode_state(inode, EXT4_STATE_NEW);
}
error = ext4_xattr_ibody_find(inode, &i, &is);
if (error)
goto cleanup;
if (is.s.not_found)
error = ext4_xattr_block_find(inode, &i, &bs);
if (error)
goto cleanup;
if (is.s.not_found && bs.s.not_found) {
error = -ENODATA;
if (flags & XATTR_REPLACE)
goto cleanup;
error = 0;
if (!value)
goto cleanup;
} else {
error = -EEXIST;
if (flags & XATTR_CREATE)
goto cleanup;
}
if (!value) {
if (!is.s.not_found)
error = ext4_xattr_ibody_set(handle, inode, &i, &is);
else if (!bs.s.not_found)
error = ext4_xattr_block_set(handle, inode, &i, &bs);
} else {
error = ext4_xattr_ibody_set(handle, inode, &i, &is);
if (!error && !bs.s.not_found) {
i.value = NULL;
error = ext4_xattr_block_set(handle, inode, &i, &bs);
} else if (error == -ENOSPC) {
if (EXT4_I(inode)->i_file_acl && !bs.s.base) {
error = ext4_xattr_block_find(inode, &i, &bs);
if (error)
goto cleanup;
}
error = ext4_xattr_block_set(handle, inode, &i, &bs);
if (error)
goto cleanup;
if (!is.s.not_found) {
i.value = NULL;
error = ext4_xattr_ibody_set(handle, inode, &i,
&is);
}
}
}
if (!error) {
ext4_xattr_update_super_block(handle, inode->i_sb);
inode->i_ctime = ext4_current_time(inode);
ext4: Expand extra_inodes space per the s_{want,min}_extra_isize fields We need to make sure that existing ext3 filesystems can also avail the new fields that have been added to the ext4 inode. We use s_want_extra_isize and s_min_extra_isize to decide by how much we should expand the inode. If EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE feature is set then we expand the inode by max(s_want_extra_isize, s_min_extra_isize , sizeof(ext4_inode) - EXT4_GOOD_OLD_INODE_SIZE) bytes. Actually it is still an open question about whether users should be able to set s_*_extra_isize smaller than the known fields or not. This patch also adds the functionality to expand inodes to include the newly added fields. We start by trying to expand by s_want_extra_isize bytes and if its fails we try to expand by s_min_extra_isize bytes. This is done by changing the i_extra_isize if enough space is available in the inode and no EAs are present. If EAs are present and there is enough space in the inode then the EAs in the inode are shifted to make space. If enough space is not available in the inode due to the EAs then 1 or more EAs are shifted to the external EA block. In the worst case when even the external EA block does not have enough space we inform the user that some EA would need to be deleted or s_min_extra_isize would have to be reduced. Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Kalpak Shah <kalpak@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2007-07-18 17:19:57 +04:00
if (!value)
ext4_clear_inode_state(inode, EXT4_STATE_NO_EXPAND);
error = ext4_mark_iloc_dirty(handle, inode, &is.iloc);
/*
* The bh is consumed by ext4_mark_iloc_dirty, even with
* error != 0.
*/
is.iloc.bh = NULL;
if (IS_SYNC(inode))
ext4_handle_sync(handle);
}
cleanup:
brelse(is.iloc.bh);
brelse(bs.bh);
if (no_expand == 0)
ext4_clear_inode_state(inode, EXT4_STATE_NO_EXPAND);
up_write(&EXT4_I(inode)->xattr_sem);
return error;
}
/*
* ext4_xattr_set()
*
* Like ext4_xattr_set_handle, but start from an inode. This extended
* attribute modification is a filesystem transaction by itself.
*
* Returns 0, or a negative error number on failure.
*/
int
ext4_xattr_set(struct inode *inode, int name_index, const char *name,
const void *value, size_t value_len, int flags)
{
handle_t *handle;
int error, retries = 0;
int credits = ext4_jbd2_credits_xattr(inode);
retry:
handle = ext4_journal_start(inode, EXT4_HT_XATTR, credits);
if (IS_ERR(handle)) {
error = PTR_ERR(handle);
} else {
int error2;
error = ext4_xattr_set_handle(handle, inode, name_index, name,
value, value_len, flags);
error2 = ext4_journal_stop(handle);
if (error == -ENOSPC &&
ext4_should_retry_alloc(inode->i_sb, &retries))
goto retry;
if (error == 0)
error = error2;
}
return error;
}
ext4: Expand extra_inodes space per the s_{want,min}_extra_isize fields We need to make sure that existing ext3 filesystems can also avail the new fields that have been added to the ext4 inode. We use s_want_extra_isize and s_min_extra_isize to decide by how much we should expand the inode. If EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE feature is set then we expand the inode by max(s_want_extra_isize, s_min_extra_isize , sizeof(ext4_inode) - EXT4_GOOD_OLD_INODE_SIZE) bytes. Actually it is still an open question about whether users should be able to set s_*_extra_isize smaller than the known fields or not. This patch also adds the functionality to expand inodes to include the newly added fields. We start by trying to expand by s_want_extra_isize bytes and if its fails we try to expand by s_min_extra_isize bytes. This is done by changing the i_extra_isize if enough space is available in the inode and no EAs are present. If EAs are present and there is enough space in the inode then the EAs in the inode are shifted to make space. If enough space is not available in the inode due to the EAs then 1 or more EAs are shifted to the external EA block. In the worst case when even the external EA block does not have enough space we inform the user that some EA would need to be deleted or s_min_extra_isize would have to be reduced. Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Kalpak Shah <kalpak@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2007-07-18 17:19:57 +04:00
/*
* Shift the EA entries in the inode to create space for the increased
* i_extra_isize.
*/
static void ext4_xattr_shift_entries(struct ext4_xattr_entry *entry,
int value_offs_shift, void *to,
void *from, size_t n, int blocksize)
{
struct ext4_xattr_entry *last = entry;
int new_offs;
/* Adjust the value offsets of the entries */
for (; !IS_LAST_ENTRY(last); last = EXT4_XATTR_NEXT(last)) {
if (!last->e_value_block && last->e_value_size) {
new_offs = le16_to_cpu(last->e_value_offs) +
value_offs_shift;
BUG_ON(new_offs + le32_to_cpu(last->e_value_size)
> blocksize);
last->e_value_offs = cpu_to_le16(new_offs);
}
}
/* Shift the entries by n bytes */
memmove(to, from, n);
}
/*
* Expand an inode by new_extra_isize bytes when EAs are present.
* Returns 0 on success or negative error number on failure.
*/
int ext4_expand_extra_isize_ea(struct inode *inode, int new_extra_isize,
struct ext4_inode *raw_inode, handle_t *handle)
{
struct ext4_xattr_ibody_header *header;
struct ext4_xattr_entry *entry, *last, *first;
struct buffer_head *bh = NULL;
struct ext4_xattr_ibody_find *is = NULL;
struct ext4_xattr_block_find *bs = NULL;
char *buffer = NULL, *b_entry_name = NULL;
size_t min_offs, free;
int total_ino;
ext4: Expand extra_inodes space per the s_{want,min}_extra_isize fields We need to make sure that existing ext3 filesystems can also avail the new fields that have been added to the ext4 inode. We use s_want_extra_isize and s_min_extra_isize to decide by how much we should expand the inode. If EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE feature is set then we expand the inode by max(s_want_extra_isize, s_min_extra_isize , sizeof(ext4_inode) - EXT4_GOOD_OLD_INODE_SIZE) bytes. Actually it is still an open question about whether users should be able to set s_*_extra_isize smaller than the known fields or not. This patch also adds the functionality to expand inodes to include the newly added fields. We start by trying to expand by s_want_extra_isize bytes and if its fails we try to expand by s_min_extra_isize bytes. This is done by changing the i_extra_isize if enough space is available in the inode and no EAs are present. If EAs are present and there is enough space in the inode then the EAs in the inode are shifted to make space. If enough space is not available in the inode due to the EAs then 1 or more EAs are shifted to the external EA block. In the worst case when even the external EA block does not have enough space we inform the user that some EA would need to be deleted or s_min_extra_isize would have to be reduced. Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Kalpak Shah <kalpak@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2007-07-18 17:19:57 +04:00
void *base, *start, *end;
int extra_isize = 0, error = 0, tried_min_extra_isize = 0;
int s_min_extra_isize = le16_to_cpu(EXT4_SB(inode->i_sb)->s_es->s_min_extra_isize);
ext4: Expand extra_inodes space per the s_{want,min}_extra_isize fields We need to make sure that existing ext3 filesystems can also avail the new fields that have been added to the ext4 inode. We use s_want_extra_isize and s_min_extra_isize to decide by how much we should expand the inode. If EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE feature is set then we expand the inode by max(s_want_extra_isize, s_min_extra_isize , sizeof(ext4_inode) - EXT4_GOOD_OLD_INODE_SIZE) bytes. Actually it is still an open question about whether users should be able to set s_*_extra_isize smaller than the known fields or not. This patch also adds the functionality to expand inodes to include the newly added fields. We start by trying to expand by s_want_extra_isize bytes and if its fails we try to expand by s_min_extra_isize bytes. This is done by changing the i_extra_isize if enough space is available in the inode and no EAs are present. If EAs are present and there is enough space in the inode then the EAs in the inode are shifted to make space. If enough space is not available in the inode due to the EAs then 1 or more EAs are shifted to the external EA block. In the worst case when even the external EA block does not have enough space we inform the user that some EA would need to be deleted or s_min_extra_isize would have to be reduced. Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Kalpak Shah <kalpak@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2007-07-18 17:19:57 +04:00
down_write(&EXT4_I(inode)->xattr_sem);
retry:
if (EXT4_I(inode)->i_extra_isize >= new_extra_isize) {
up_write(&EXT4_I(inode)->xattr_sem);
return 0;
}
header = IHDR(inode, raw_inode);
entry = IFIRST(header);
/*
* Check if enough free space is available in the inode to shift the
* entries ahead by new_extra_isize.
*/
base = start = entry;
end = (void *)raw_inode + EXT4_SB(inode->i_sb)->s_inode_size;
min_offs = end - base;
last = entry;
total_ino = sizeof(struct ext4_xattr_ibody_header);
free = ext4_xattr_free_space(last, &min_offs, base, &total_ino);
if (free >= new_extra_isize) {
entry = IFIRST(header);
ext4_xattr_shift_entries(entry, EXT4_I(inode)->i_extra_isize
- new_extra_isize, (void *)raw_inode +
EXT4_GOOD_OLD_INODE_SIZE + new_extra_isize,
(void *)header, total_ino,
inode->i_sb->s_blocksize);
EXT4_I(inode)->i_extra_isize = new_extra_isize;
error = 0;
goto cleanup;
}
/*
* Enough free space isn't available in the inode, check if
* EA block can hold new_extra_isize bytes.
*/
if (EXT4_I(inode)->i_file_acl) {
bh = sb_bread(inode->i_sb, EXT4_I(inode)->i_file_acl);
error = -EIO;
if (!bh)
goto cleanup;
if (ext4_xattr_check_block(inode, bh)) {
EXT4_ERROR_INODE(inode, "bad block %llu",
EXT4_I(inode)->i_file_acl);
ext4: Expand extra_inodes space per the s_{want,min}_extra_isize fields We need to make sure that existing ext3 filesystems can also avail the new fields that have been added to the ext4 inode. We use s_want_extra_isize and s_min_extra_isize to decide by how much we should expand the inode. If EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE feature is set then we expand the inode by max(s_want_extra_isize, s_min_extra_isize , sizeof(ext4_inode) - EXT4_GOOD_OLD_INODE_SIZE) bytes. Actually it is still an open question about whether users should be able to set s_*_extra_isize smaller than the known fields or not. This patch also adds the functionality to expand inodes to include the newly added fields. We start by trying to expand by s_want_extra_isize bytes and if its fails we try to expand by s_min_extra_isize bytes. This is done by changing the i_extra_isize if enough space is available in the inode and no EAs are present. If EAs are present and there is enough space in the inode then the EAs in the inode are shifted to make space. If enough space is not available in the inode due to the EAs then 1 or more EAs are shifted to the external EA block. In the worst case when even the external EA block does not have enough space we inform the user that some EA would need to be deleted or s_min_extra_isize would have to be reduced. Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Kalpak Shah <kalpak@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2007-07-18 17:19:57 +04:00
error = -EIO;
goto cleanup;
}
base = BHDR(bh);
first = BFIRST(bh);
end = bh->b_data + bh->b_size;
min_offs = end - base;
free = ext4_xattr_free_space(first, &min_offs, base, NULL);
ext4: Expand extra_inodes space per the s_{want,min}_extra_isize fields We need to make sure that existing ext3 filesystems can also avail the new fields that have been added to the ext4 inode. We use s_want_extra_isize and s_min_extra_isize to decide by how much we should expand the inode. If EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE feature is set then we expand the inode by max(s_want_extra_isize, s_min_extra_isize , sizeof(ext4_inode) - EXT4_GOOD_OLD_INODE_SIZE) bytes. Actually it is still an open question about whether users should be able to set s_*_extra_isize smaller than the known fields or not. This patch also adds the functionality to expand inodes to include the newly added fields. We start by trying to expand by s_want_extra_isize bytes and if its fails we try to expand by s_min_extra_isize bytes. This is done by changing the i_extra_isize if enough space is available in the inode and no EAs are present. If EAs are present and there is enough space in the inode then the EAs in the inode are shifted to make space. If enough space is not available in the inode due to the EAs then 1 or more EAs are shifted to the external EA block. In the worst case when even the external EA block does not have enough space we inform the user that some EA would need to be deleted or s_min_extra_isize would have to be reduced. Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Kalpak Shah <kalpak@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2007-07-18 17:19:57 +04:00
if (free < new_extra_isize) {
if (!tried_min_extra_isize && s_min_extra_isize) {
tried_min_extra_isize++;
new_extra_isize = s_min_extra_isize;
brelse(bh);
goto retry;
}
error = -1;
goto cleanup;
}
} else {
free = inode->i_sb->s_blocksize;
}
while (new_extra_isize > 0) {
size_t offs, size, entry_size;
struct ext4_xattr_entry *small_entry = NULL;
struct ext4_xattr_info i = {
.value = NULL,
.value_len = 0,
};
unsigned int total_size; /* EA entry size + value size */
unsigned int shift_bytes; /* No. of bytes to shift EAs by? */
unsigned int min_total_size = ~0U;
is = kzalloc(sizeof(struct ext4_xattr_ibody_find), GFP_NOFS);
bs = kzalloc(sizeof(struct ext4_xattr_block_find), GFP_NOFS);
if (!is || !bs) {
error = -ENOMEM;
goto cleanup;
}
is->s.not_found = -ENODATA;
bs->s.not_found = -ENODATA;
is->iloc.bh = NULL;
bs->bh = NULL;
last = IFIRST(header);
/* Find the entry best suited to be pushed into EA block */
entry = NULL;
for (; !IS_LAST_ENTRY(last); last = EXT4_XATTR_NEXT(last)) {
total_size =
EXT4_XATTR_SIZE(le32_to_cpu(last->e_value_size)) +
EXT4_XATTR_LEN(last->e_name_len);
if (total_size <= free && total_size < min_total_size) {
if (total_size < new_extra_isize) {
small_entry = last;
} else {
entry = last;
min_total_size = total_size;
}
}
}
if (entry == NULL) {
if (small_entry) {
entry = small_entry;
} else {
if (!tried_min_extra_isize &&
s_min_extra_isize) {
tried_min_extra_isize++;
new_extra_isize = s_min_extra_isize;
kfree(is); is = NULL;
kfree(bs); bs = NULL;
brelse(bh);
ext4: Expand extra_inodes space per the s_{want,min}_extra_isize fields We need to make sure that existing ext3 filesystems can also avail the new fields that have been added to the ext4 inode. We use s_want_extra_isize and s_min_extra_isize to decide by how much we should expand the inode. If EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE feature is set then we expand the inode by max(s_want_extra_isize, s_min_extra_isize , sizeof(ext4_inode) - EXT4_GOOD_OLD_INODE_SIZE) bytes. Actually it is still an open question about whether users should be able to set s_*_extra_isize smaller than the known fields or not. This patch also adds the functionality to expand inodes to include the newly added fields. We start by trying to expand by s_want_extra_isize bytes and if its fails we try to expand by s_min_extra_isize bytes. This is done by changing the i_extra_isize if enough space is available in the inode and no EAs are present. If EAs are present and there is enough space in the inode then the EAs in the inode are shifted to make space. If enough space is not available in the inode due to the EAs then 1 or more EAs are shifted to the external EA block. In the worst case when even the external EA block does not have enough space we inform the user that some EA would need to be deleted or s_min_extra_isize would have to be reduced. Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Kalpak Shah <kalpak@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2007-07-18 17:19:57 +04:00
goto retry;
}
error = -1;
goto cleanup;
}
}
offs = le16_to_cpu(entry->e_value_offs);
size = le32_to_cpu(entry->e_value_size);
entry_size = EXT4_XATTR_LEN(entry->e_name_len);
i.name_index = entry->e_name_index,
buffer = kmalloc(EXT4_XATTR_SIZE(size), GFP_NOFS);
b_entry_name = kmalloc(entry->e_name_len + 1, GFP_NOFS);
if (!buffer || !b_entry_name) {
error = -ENOMEM;
goto cleanup;
}
/* Save the entry name and the entry value */
memcpy(buffer, (void *)IFIRST(header) + offs,
EXT4_XATTR_SIZE(size));
memcpy(b_entry_name, entry->e_name, entry->e_name_len);
b_entry_name[entry->e_name_len] = '\0';
i.name = b_entry_name;
error = ext4_get_inode_loc(inode, &is->iloc);
if (error)
goto cleanup;
error = ext4_xattr_ibody_find(inode, &i, is);
if (error)
goto cleanup;
/* Remove the chosen entry from the inode */
error = ext4_xattr_ibody_set(handle, inode, &i, is);
if (error)
goto cleanup;
ext4: Expand extra_inodes space per the s_{want,min}_extra_isize fields We need to make sure that existing ext3 filesystems can also avail the new fields that have been added to the ext4 inode. We use s_want_extra_isize and s_min_extra_isize to decide by how much we should expand the inode. If EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE feature is set then we expand the inode by max(s_want_extra_isize, s_min_extra_isize , sizeof(ext4_inode) - EXT4_GOOD_OLD_INODE_SIZE) bytes. Actually it is still an open question about whether users should be able to set s_*_extra_isize smaller than the known fields or not. This patch also adds the functionality to expand inodes to include the newly added fields. We start by trying to expand by s_want_extra_isize bytes and if its fails we try to expand by s_min_extra_isize bytes. This is done by changing the i_extra_isize if enough space is available in the inode and no EAs are present. If EAs are present and there is enough space in the inode then the EAs in the inode are shifted to make space. If enough space is not available in the inode due to the EAs then 1 or more EAs are shifted to the external EA block. In the worst case when even the external EA block does not have enough space we inform the user that some EA would need to be deleted or s_min_extra_isize would have to be reduced. Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Kalpak Shah <kalpak@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2007-07-18 17:19:57 +04:00
entry = IFIRST(header);
if (entry_size + EXT4_XATTR_SIZE(size) >= new_extra_isize)
shift_bytes = new_extra_isize;
else
shift_bytes = entry_size + size;
/* Adjust the offsets and shift the remaining entries ahead */
ext4_xattr_shift_entries(entry, EXT4_I(inode)->i_extra_isize -
shift_bytes, (void *)raw_inode +
EXT4_GOOD_OLD_INODE_SIZE + extra_isize + shift_bytes,
(void *)header, total_ino - entry_size,
inode->i_sb->s_blocksize);
extra_isize += shift_bytes;
new_extra_isize -= shift_bytes;
EXT4_I(inode)->i_extra_isize = extra_isize;
i.name = b_entry_name;
i.value = buffer;
i.value_len = size;
ext4: Expand extra_inodes space per the s_{want,min}_extra_isize fields We need to make sure that existing ext3 filesystems can also avail the new fields that have been added to the ext4 inode. We use s_want_extra_isize and s_min_extra_isize to decide by how much we should expand the inode. If EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE feature is set then we expand the inode by max(s_want_extra_isize, s_min_extra_isize , sizeof(ext4_inode) - EXT4_GOOD_OLD_INODE_SIZE) bytes. Actually it is still an open question about whether users should be able to set s_*_extra_isize smaller than the known fields or not. This patch also adds the functionality to expand inodes to include the newly added fields. We start by trying to expand by s_want_extra_isize bytes and if its fails we try to expand by s_min_extra_isize bytes. This is done by changing the i_extra_isize if enough space is available in the inode and no EAs are present. If EAs are present and there is enough space in the inode then the EAs in the inode are shifted to make space. If enough space is not available in the inode due to the EAs then 1 or more EAs are shifted to the external EA block. In the worst case when even the external EA block does not have enough space we inform the user that some EA would need to be deleted or s_min_extra_isize would have to be reduced. Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Kalpak Shah <kalpak@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2007-07-18 17:19:57 +04:00
error = ext4_xattr_block_find(inode, &i, bs);
if (error)
goto cleanup;
/* Add entry which was removed from the inode into the block */
error = ext4_xattr_block_set(handle, inode, &i, bs);
if (error)
goto cleanup;
kfree(b_entry_name);
kfree(buffer);
b_entry_name = NULL;
buffer = NULL;
ext4: Expand extra_inodes space per the s_{want,min}_extra_isize fields We need to make sure that existing ext3 filesystems can also avail the new fields that have been added to the ext4 inode. We use s_want_extra_isize and s_min_extra_isize to decide by how much we should expand the inode. If EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE feature is set then we expand the inode by max(s_want_extra_isize, s_min_extra_isize , sizeof(ext4_inode) - EXT4_GOOD_OLD_INODE_SIZE) bytes. Actually it is still an open question about whether users should be able to set s_*_extra_isize smaller than the known fields or not. This patch also adds the functionality to expand inodes to include the newly added fields. We start by trying to expand by s_want_extra_isize bytes and if its fails we try to expand by s_min_extra_isize bytes. This is done by changing the i_extra_isize if enough space is available in the inode and no EAs are present. If EAs are present and there is enough space in the inode then the EAs in the inode are shifted to make space. If enough space is not available in the inode due to the EAs then 1 or more EAs are shifted to the external EA block. In the worst case when even the external EA block does not have enough space we inform the user that some EA would need to be deleted or s_min_extra_isize would have to be reduced. Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Kalpak Shah <kalpak@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2007-07-18 17:19:57 +04:00
brelse(is->iloc.bh);
kfree(is);
kfree(bs);
}
brelse(bh);
up_write(&EXT4_I(inode)->xattr_sem);
return 0;
cleanup:
kfree(b_entry_name);
kfree(buffer);
if (is)
brelse(is->iloc.bh);
kfree(is);
kfree(bs);
brelse(bh);
up_write(&EXT4_I(inode)->xattr_sem);
return error;
}
/*
* ext4_xattr_delete_inode()
*
* Free extended attribute resources associated with this inode. This
* is called immediately before an inode is freed. We have exclusive
* access to the inode.
*/
void
ext4_xattr_delete_inode(handle_t *handle, struct inode *inode)
{
struct buffer_head *bh = NULL;
if (!EXT4_I(inode)->i_file_acl)
goto cleanup;
bh = sb_bread(inode->i_sb, EXT4_I(inode)->i_file_acl);
if (!bh) {
EXT4_ERROR_INODE(inode, "block %llu read error",
EXT4_I(inode)->i_file_acl);
goto cleanup;
}
if (BHDR(bh)->h_magic != cpu_to_le32(EXT4_XATTR_MAGIC) ||
BHDR(bh)->h_blocks != cpu_to_le32(1)) {
EXT4_ERROR_INODE(inode, "bad block %llu",
EXT4_I(inode)->i_file_acl);
goto cleanup;
}
ext4_xattr_release_block(handle, inode, bh);
EXT4_I(inode)->i_file_acl = 0;
cleanup:
brelse(bh);
}
/*
* ext4_xattr_put_super()
*
* This is called when a file system is unmounted.
*/
void
ext4_xattr_put_super(struct super_block *sb)
{
mb_cache_shrink(sb->s_bdev);
}
/*
* ext4_xattr_cache_insert()
*
* Create a new entry in the extended attribute cache, and insert
* it unless such an entry is already in the cache.
*
* Returns 0, or a negative error number on failure.
*/
static void
ext4_xattr_cache_insert(struct mb_cache *ext4_mb_cache, struct buffer_head *bh)
{
__u32 hash = le32_to_cpu(BHDR(bh)->h_hash);
struct mb_cache_entry *ce;
int error;
ce = mb_cache_entry_alloc(ext4_mb_cache, GFP_NOFS);
if (!ce) {
ea_bdebug(bh, "out of memory");
return;
}
error = mb_cache_entry_insert(ce, bh->b_bdev, bh->b_blocknr, hash);
if (error) {
mb_cache_entry_free(ce);
if (error == -EBUSY) {
ea_bdebug(bh, "already in cache");
error = 0;
}
} else {
ea_bdebug(bh, "inserting [%x]", (int)hash);
mb_cache_entry_release(ce);
}
}
/*
* ext4_xattr_cmp()
*
* Compare two extended attribute blocks for equality.
*
* Returns 0 if the blocks are equal, 1 if they differ, and
* a negative error number on errors.
*/
static int
ext4_xattr_cmp(struct ext4_xattr_header *header1,
struct ext4_xattr_header *header2)
{
struct ext4_xattr_entry *entry1, *entry2;
entry1 = ENTRY(header1+1);
entry2 = ENTRY(header2+1);
while (!IS_LAST_ENTRY(entry1)) {
if (IS_LAST_ENTRY(entry2))
return 1;
if (entry1->e_hash != entry2->e_hash ||
entry1->e_name_index != entry2->e_name_index ||
entry1->e_name_len != entry2->e_name_len ||
entry1->e_value_size != entry2->e_value_size ||
memcmp(entry1->e_name, entry2->e_name, entry1->e_name_len))
return 1;
if (entry1->e_value_block != 0 || entry2->e_value_block != 0)
return -EIO;
if (memcmp((char *)header1 + le16_to_cpu(entry1->e_value_offs),
(char *)header2 + le16_to_cpu(entry2->e_value_offs),
le32_to_cpu(entry1->e_value_size)))
return 1;
entry1 = EXT4_XATTR_NEXT(entry1);
entry2 = EXT4_XATTR_NEXT(entry2);
}
if (!IS_LAST_ENTRY(entry2))
return 1;
return 0;
}
/*
* ext4_xattr_cache_find()
*
* Find an identical extended attribute block.
*
* Returns a pointer to the block found, or NULL if such a block was
* not found or an error occurred.
*/
static struct buffer_head *
ext4_xattr_cache_find(struct inode *inode, struct ext4_xattr_header *header,
struct mb_cache_entry **pce)
{
__u32 hash = le32_to_cpu(header->h_hash);
struct mb_cache_entry *ce;
struct mb_cache *ext4_mb_cache = EXT4_GET_MB_CACHE(inode);
if (!header->h_hash)
return NULL; /* never share */
ea_idebug(inode, "looking for cached blocks [%x]", (int)hash);
again:
ce = mb_cache_entry_find_first(ext4_mb_cache, inode->i_sb->s_bdev,
hash);
while (ce) {
struct buffer_head *bh;
if (IS_ERR(ce)) {
if (PTR_ERR(ce) == -EAGAIN)
goto again;
break;
}
bh = sb_bread(inode->i_sb, ce->e_block);
if (!bh) {
EXT4_ERROR_INODE(inode, "block %lu read error",
(unsigned long) ce->e_block);
} else if (le32_to_cpu(BHDR(bh)->h_refcount) >=
EXT4_XATTR_REFCOUNT_MAX) {
ea_idebug(inode, "block %lu refcount %d>=%d",
(unsigned long) ce->e_block,
le32_to_cpu(BHDR(bh)->h_refcount),
EXT4_XATTR_REFCOUNT_MAX);
} else if (ext4_xattr_cmp(header, BHDR(bh)) == 0) {
*pce = ce;
return bh;
}
brelse(bh);
ce = mb_cache_entry_find_next(ce, inode->i_sb->s_bdev, hash);
}
return NULL;
}
#define NAME_HASH_SHIFT 5
#define VALUE_HASH_SHIFT 16
/*
* ext4_xattr_hash_entry()
*
* Compute the hash of an extended attribute.
*/
static inline void ext4_xattr_hash_entry(struct ext4_xattr_header *header,
struct ext4_xattr_entry *entry)
{
__u32 hash = 0;
char *name = entry->e_name;
int n;
for (n = 0; n < entry->e_name_len; n++) {
hash = (hash << NAME_HASH_SHIFT) ^
(hash >> (8*sizeof(hash) - NAME_HASH_SHIFT)) ^
*name++;
}
if (entry->e_value_block == 0 && entry->e_value_size != 0) {
__le32 *value = (__le32 *)((char *)header +
le16_to_cpu(entry->e_value_offs));
for (n = (le32_to_cpu(entry->e_value_size) +
EXT4_XATTR_ROUND) >> EXT4_XATTR_PAD_BITS; n; n--) {
hash = (hash << VALUE_HASH_SHIFT) ^
(hash >> (8*sizeof(hash) - VALUE_HASH_SHIFT)) ^
le32_to_cpu(*value++);
}
}
entry->e_hash = cpu_to_le32(hash);
}
#undef NAME_HASH_SHIFT
#undef VALUE_HASH_SHIFT
#define BLOCK_HASH_SHIFT 16
/*
* ext4_xattr_rehash()
*
* Re-compute the extended attribute hash value after an entry has changed.
*/
static void ext4_xattr_rehash(struct ext4_xattr_header *header,
struct ext4_xattr_entry *entry)
{
struct ext4_xattr_entry *here;
__u32 hash = 0;
ext4_xattr_hash_entry(header, entry);
here = ENTRY(header+1);
while (!IS_LAST_ENTRY(here)) {
if (!here->e_hash) {
/* Block is not shared if an entry's hash value == 0 */
hash = 0;
break;
}
hash = (hash << BLOCK_HASH_SHIFT) ^
(hash >> (8*sizeof(hash) - BLOCK_HASH_SHIFT)) ^
le32_to_cpu(here->e_hash);
here = EXT4_XATTR_NEXT(here);
}
header->h_hash = cpu_to_le32(hash);
}
#undef BLOCK_HASH_SHIFT
#define HASH_BUCKET_BITS 10
struct mb_cache *
ext4_xattr_create_cache(char *name)
{
return mb_cache_create(name, HASH_BUCKET_BITS);
}
void ext4_xattr_destroy_cache(struct mb_cache *cache)
{
if (cache)
mb_cache_destroy(cache);
}