WSL2-Linux-Kernel/drivers/misc/cxl/main.c

379 строки
9.0 KiB
C
Исходник Обычный вид История

/*
* Copyright 2014 IBM Corp.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <linux/spinlock.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/device.h>
#include <linux/mutex.h>
#include <linux/init.h>
#include <linux/list.h>
#include <linux/mm.h>
#include <linux/of.h>
#include <linux/slab.h>
#include <linux/idr.h>
#include <linux/pci.h>
#include <linux/sched/task.h>
#include <asm/cputable.h>
#include <misc/cxl-base.h>
#include "cxl.h"
#include "trace.h"
static DEFINE_SPINLOCK(adapter_idr_lock);
static DEFINE_IDR(cxl_adapter_idr);
uint cxl_verbose;
module_param_named(verbose, cxl_verbose, uint, 0600);
MODULE_PARM_DESC(verbose, "Enable verbose dmesg output");
const struct cxl_backend_ops *cxl_ops;
int cxl_afu_slbia(struct cxl_afu *afu)
{
unsigned long timeout = jiffies + (HZ * CXL_TIMEOUT);
pr_devel("cxl_afu_slbia issuing SLBIA command\n");
cxl_p2n_write(afu, CXL_SLBIA_An, CXL_TLB_SLB_IQ_ALL);
while (cxl_p2n_read(afu, CXL_SLBIA_An) & CXL_TLB_SLB_P) {
if (time_after_eq(jiffies, timeout)) {
dev_warn(&afu->dev, "WARNING: CXL AFU SLBIA timed out!\n");
return -EBUSY;
}
/* If the adapter has gone down, we can assume that we
* will PERST it and that will invalidate everything.
*/
if (!cxl_ops->link_ok(afu->adapter, afu))
return -EIO;
cpu_relax();
}
return 0;
}
static inline void _cxl_slbia(struct cxl_context *ctx, struct mm_struct *mm)
{
unsigned long flags;
if (ctx->mm != mm)
return;
pr_devel("%s matched mm - card: %i afu: %i pe: %i\n", __func__,
ctx->afu->adapter->adapter_num, ctx->afu->slice, ctx->pe);
spin_lock_irqsave(&ctx->sste_lock, flags);
trace_cxl_slbia(ctx);
memset(ctx->sstp, 0, ctx->sst_size);
spin_unlock_irqrestore(&ctx->sste_lock, flags);
mb();
cxl_afu_slbia(ctx->afu);
}
static inline void cxl_slbia_core(struct mm_struct *mm)
{
struct cxl *adapter;
struct cxl_afu *afu;
struct cxl_context *ctx;
int card, slice, id;
pr_devel("%s called\n", __func__);
spin_lock(&adapter_idr_lock);
idr_for_each_entry(&cxl_adapter_idr, adapter, card) {
/* XXX: Make this lookup faster with link from mm to ctx */
spin_lock(&adapter->afu_list_lock);
for (slice = 0; slice < adapter->slices; slice++) {
afu = adapter->afu[slice];
if (!afu || !afu->enabled)
continue;
rcu_read_lock();
idr_for_each_entry(&afu->contexts_idr, ctx, id)
_cxl_slbia(ctx, mm);
rcu_read_unlock();
}
spin_unlock(&adapter->afu_list_lock);
}
spin_unlock(&adapter_idr_lock);
}
static struct cxl_calls cxl_calls = {
.cxl_slbia = cxl_slbia_core,
.cxl_pci_associate_default_context = _cxl_pci_associate_default_context,
.cxl_pci_disable_device = _cxl_pci_disable_device,
.cxl_next_msi_hwirq = _cxl_next_msi_hwirq,
cxl: Add support for interrupts on the Mellanox CX4 The Mellanox CX4 in cxl mode uses a hybrid interrupt model, where interrupts are routed from the networking hardware to the XSL using the MSIX table, and from there will be transformed back into an MSIX interrupt using the cxl style interrupts (i.e. using IVTE entries and ranges to map a PE and AFU interrupt number to an MSIX address). We want to hide the implementation details of cxl interrupts as much as possible. To this end, we use a special version of the MSI setup & teardown routines in the PHB while in cxl mode to allocate the cxl interrupts and configure the IVTE entries in the process element. This function does not configure the MSIX table - the CX4 card uses a custom format in that table and it would not be appropriate to fill that out in generic code. The rest of the functionality is similar to the "Full MSI-X mode" described in the CAIA, and this could be easily extended to support other adapters that use that mode in the future. The interrupts will be associated with the default context. If the maximum number of interrupts per context has been limited (e.g. by the mlx5 driver), it will automatically allocate additional kernel contexts to associate extra interrupts as required. These contexts will be started using the same WED that was used to start the default context. Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-07-14 00:17:10 +03:00
.cxl_cx4_setup_msi_irqs = _cxl_cx4_setup_msi_irqs,
.cxl_cx4_teardown_msi_irqs = _cxl_cx4_teardown_msi_irqs,
.owner = THIS_MODULE,
};
int cxl_alloc_sst(struct cxl_context *ctx)
{
unsigned long vsid;
u64 ea_mask, size, sstp0, sstp1;
sstp0 = 0;
sstp1 = 0;
ctx->sst_size = PAGE_SIZE;
ctx->sst_lru = 0;
ctx->sstp = (struct cxl_sste *)get_zeroed_page(GFP_KERNEL);
if (!ctx->sstp) {
pr_err("cxl_alloc_sst: Unable to allocate segment table\n");
return -ENOMEM;
}
pr_devel("SSTP allocated at 0x%p\n", ctx->sstp);
vsid = get_kernel_vsid((u64)ctx->sstp, mmu_kernel_ssize) << 12;
sstp0 |= (u64)mmu_kernel_ssize << CXL_SSTP0_An_B_SHIFT;
sstp0 |= (SLB_VSID_KERNEL | mmu_psize_defs[mmu_linear_psize].sllp) << 50;
size = (((u64)ctx->sst_size >> 8) - 1) << CXL_SSTP0_An_SegTableSize_SHIFT;
if (unlikely(size & ~CXL_SSTP0_An_SegTableSize_MASK)) {
WARN(1, "Impossible segment table size\n");
return -EINVAL;
}
sstp0 |= size;
if (mmu_kernel_ssize == MMU_SEGSIZE_256M)
ea_mask = 0xfffff00ULL;
else
ea_mask = 0xffffffff00ULL;
sstp0 |= vsid >> (50-14); /* Top 14 bits of VSID */
sstp1 |= (vsid << (64-(50-14))) & ~ea_mask;
sstp1 |= (u64)ctx->sstp & ea_mask;
sstp1 |= CXL_SSTP1_An_V;
pr_devel("Looked up %#llx: slbfee. %#llx (ssize: %x, vsid: %#lx), copied to SSTP0: %#llx, SSTP1: %#llx\n",
(u64)ctx->sstp, (u64)ctx->sstp & ESID_MASK, mmu_kernel_ssize, vsid, sstp0, sstp1);
/* Store calculated sstp hardware points for use later */
ctx->sstp0 = sstp0;
ctx->sstp1 = sstp1;
return 0;
}
/* print buffer content as integers when debugging */
void cxl_dump_debug_buffer(void *buf, size_t buf_len)
{
#ifdef DEBUG
int i, *ptr;
/*
* We want to regroup up to 4 integers per line, which means they
* need to be in the same pr_devel() statement
*/
ptr = (int *) buf;
for (i = 0; i * 4 < buf_len; i += 4) {
if ((i + 3) * 4 < buf_len)
pr_devel("%.8x %.8x %.8x %.8x\n", ptr[i], ptr[i + 1],
ptr[i + 2], ptr[i + 3]);
else if ((i + 2) * 4 < buf_len)
pr_devel("%.8x %.8x %.8x\n", ptr[i], ptr[i + 1],
ptr[i + 2]);
else if ((i + 1) * 4 < buf_len)
pr_devel("%.8x %.8x\n", ptr[i], ptr[i + 1]);
else
pr_devel("%.8x\n", ptr[i]);
}
#endif /* DEBUG */
}
/* Find a CXL adapter by it's number and increase it's refcount */
struct cxl *get_cxl_adapter(int num)
{
struct cxl *adapter;
spin_lock(&adapter_idr_lock);
if ((adapter = idr_find(&cxl_adapter_idr, num)))
get_device(&adapter->dev);
spin_unlock(&adapter_idr_lock);
return adapter;
}
static int cxl_alloc_adapter_nr(struct cxl *adapter)
{
int i;
idr_preload(GFP_KERNEL);
spin_lock(&adapter_idr_lock);
i = idr_alloc(&cxl_adapter_idr, adapter, 0, 0, GFP_NOWAIT);
spin_unlock(&adapter_idr_lock);
idr_preload_end();
if (i < 0)
return i;
adapter->adapter_num = i;
return 0;
}
void cxl_remove_adapter_nr(struct cxl *adapter)
{
idr_remove(&cxl_adapter_idr, adapter->adapter_num);
}
struct cxl *cxl_alloc_adapter(void)
{
struct cxl *adapter;
if (!(adapter = kzalloc(sizeof(struct cxl), GFP_KERNEL)))
return NULL;
spin_lock_init(&adapter->afu_list_lock);
if (cxl_alloc_adapter_nr(adapter))
goto err1;
if (dev_set_name(&adapter->dev, "card%i", adapter->adapter_num))
goto err2;
cxl: Prevent adapter reset if an active context exists This patch prevents resetting the cxl adapter via sysfs in presence of one or more active cxl_context on it. This protects against an unrecoverable error caused by PSL owning a dirty cache line even after reset and host tries to touch the same cache line. In case a force reset of the card is required irrespective of any active contexts, the int value -1 can be stored in the 'reset' sysfs attribute of the card. The patch introduces a new atomic_t member named contexts_num inside struct cxl that holds the number of active context attached to the card , which is checked against '0' before proceeding with the reset. To prevent against a race condition where a context is activated just after reset check is performed, the contexts_num is atomically set to '-1' after reset-check to indicate that no more contexts can be activated on the card anymore. Before activating a context we atomically test if contexts_num is non-negative and if so, increment its value by one. In case the value of contexts_num is negative then it indicates that the card is about to be reset and context activation is error-ed out at that point. Fixes: 62fa19d4b4fd ("cxl: Add ability to reset the card") Cc: stable@vger.kernel.org # v4.0+ Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-10-14 12:38:36 +03:00
/* start with context lock taken */
atomic_set(&adapter->contexts_num, -1);
cxl: Prevent adapter reset if an active context exists This patch prevents resetting the cxl adapter via sysfs in presence of one or more active cxl_context on it. This protects against an unrecoverable error caused by PSL owning a dirty cache line even after reset and host tries to touch the same cache line. In case a force reset of the card is required irrespective of any active contexts, the int value -1 can be stored in the 'reset' sysfs attribute of the card. The patch introduces a new atomic_t member named contexts_num inside struct cxl that holds the number of active context attached to the card , which is checked against '0' before proceeding with the reset. To prevent against a race condition where a context is activated just after reset check is performed, the contexts_num is atomically set to '-1' after reset-check to indicate that no more contexts can be activated on the card anymore. Before activating a context we atomically test if contexts_num is non-negative and if so, increment its value by one. In case the value of contexts_num is negative then it indicates that the card is about to be reset and context activation is error-ed out at that point. Fixes: 62fa19d4b4fd ("cxl: Add ability to reset the card") Cc: stable@vger.kernel.org # v4.0+ Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-10-14 12:38:36 +03:00
return adapter;
err2:
cxl_remove_adapter_nr(adapter);
err1:
kfree(adapter);
return NULL;
}
struct cxl_afu *cxl_alloc_afu(struct cxl *adapter, int slice)
{
struct cxl_afu *afu;
if (!(afu = kzalloc(sizeof(struct cxl_afu), GFP_KERNEL)))
return NULL;
afu->adapter = adapter;
afu->dev.parent = &adapter->dev;
afu->dev.release = cxl_ops->release_afu;
afu->slice = slice;
idr_init(&afu->contexts_idr);
mutex_init(&afu->contexts_lock);
spin_lock_init(&afu->afu_cntl_lock);
atomic_set(&afu->configured_state, -1);
afu->prefault_mode = CXL_PREFAULT_NONE;
afu->irqs_max = afu->adapter->user_irqs;
return afu;
}
int cxl_afu_select_best_mode(struct cxl_afu *afu)
{
if (afu->modes_supported & CXL_MODE_DIRECTED)
return cxl_ops->afu_activate_mode(afu, CXL_MODE_DIRECTED);
if (afu->modes_supported & CXL_MODE_DEDICATED)
return cxl_ops->afu_activate_mode(afu, CXL_MODE_DEDICATED);
dev_warn(&afu->dev, "No supported programming modes available\n");
/* We don't fail this so the user can inspect sysfs */
return 0;
}
cxl: Prevent adapter reset if an active context exists This patch prevents resetting the cxl adapter via sysfs in presence of one or more active cxl_context on it. This protects against an unrecoverable error caused by PSL owning a dirty cache line even after reset and host tries to touch the same cache line. In case a force reset of the card is required irrespective of any active contexts, the int value -1 can be stored in the 'reset' sysfs attribute of the card. The patch introduces a new atomic_t member named contexts_num inside struct cxl that holds the number of active context attached to the card , which is checked against '0' before proceeding with the reset. To prevent against a race condition where a context is activated just after reset check is performed, the contexts_num is atomically set to '-1' after reset-check to indicate that no more contexts can be activated on the card anymore. Before activating a context we atomically test if contexts_num is non-negative and if so, increment its value by one. In case the value of contexts_num is negative then it indicates that the card is about to be reset and context activation is error-ed out at that point. Fixes: 62fa19d4b4fd ("cxl: Add ability to reset the card") Cc: stable@vger.kernel.org # v4.0+ Acked-by: Frederic Barrat <fbarrat@linux.vnet.ibm.com> Reviewed-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Signed-off-by: Vaibhav Jain <vaibhav@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-10-14 12:38:36 +03:00
int cxl_adapter_context_get(struct cxl *adapter)
{
int rc;
rc = atomic_inc_unless_negative(&adapter->contexts_num);
return rc >= 0 ? 0 : -EBUSY;
}
void cxl_adapter_context_put(struct cxl *adapter)
{
atomic_dec_if_positive(&adapter->contexts_num);
}
int cxl_adapter_context_lock(struct cxl *adapter)
{
int rc;
/* no active contexts -> contexts_num == 0 */
rc = atomic_cmpxchg(&adapter->contexts_num, 0, -1);
return rc ? -EBUSY : 0;
}
void cxl_adapter_context_unlock(struct cxl *adapter)
{
int val = atomic_cmpxchg(&adapter->contexts_num, -1, 0);
/*
* contexts lock taken -> contexts_num == -1
* If not true then show a warning and force reset the lock.
* This will happen when context_unlock was requested without
* doing a context_lock.
*/
if (val != -1) {
atomic_set(&adapter->contexts_num, 0);
WARN(1, "Adapter context unlocked with %d active contexts",
val);
}
}
static int __init init_cxl(void)
{
int rc = 0;
if ((rc = cxl_file_init()))
return rc;
cxl_debugfs_init();
if ((rc = register_cxl_calls(&cxl_calls)))
goto err;
if (cpu_has_feature(CPU_FTR_HVMODE)) {
cxl_ops = &cxl_native_ops;
rc = pci_register_driver(&cxl_pci_driver);
}
#ifdef CONFIG_PPC_PSERIES
else {
cxl_ops = &cxl_guest_ops;
rc = platform_driver_register(&cxl_of_driver);
}
#endif
if (rc)
goto err1;
return 0;
err1:
unregister_cxl_calls(&cxl_calls);
err:
cxl_debugfs_exit();
cxl_file_exit();
return rc;
}
static void exit_cxl(void)
{
if (cpu_has_feature(CPU_FTR_HVMODE))
pci_unregister_driver(&cxl_pci_driver);
#ifdef CONFIG_PPC_PSERIES
else
platform_driver_unregister(&cxl_of_driver);
#endif
cxl_debugfs_exit();
cxl_file_exit();
unregister_cxl_calls(&cxl_calls);
idr_destroy(&cxl_adapter_idr);
}
module_init(init_cxl);
module_exit(exit_cxl);
MODULE_DESCRIPTION("IBM Coherent Accelerator");
MODULE_AUTHOR("Ian Munsie <imunsie@au1.ibm.com>");
MODULE_LICENSE("GPL");