WSL2-Linux-Kernel/sound/soc/sof/pm.c

325 строки
7.8 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
//
// This file is provided under a dual BSD/GPLv2 license. When using or
// redistributing this file, you may do so under either license.
//
// Copyright(c) 2018 Intel Corporation. All rights reserved.
//
// Author: Liam Girdwood <liam.r.girdwood@linux.intel.com>
//
#include "ops.h"
#include "sof-priv.h"
#include "sof-audio.h"
/*
* Helper function to determine the target DSP state during
* system suspend. This function only cares about the device
* D-states. Platform-specific substates, if any, should be
* handled by the platform-specific parts.
*/
static u32 snd_sof_dsp_power_target(struct snd_sof_dev *sdev)
{
u32 target_dsp_state;
switch (sdev->system_suspend_target) {
case SOF_SUSPEND_S3:
/* DSP should be in D3 if the system is suspending to S3 */
target_dsp_state = SOF_DSP_PM_D3;
break;
case SOF_SUSPEND_S0IX:
/*
* Currently, the only criterion for retaining the DSP in D0
* is that there are streams that ignored the suspend trigger.
* Additional criteria such Soundwire clock-stop mode and
* device suspend latency considerations will be added later.
*/
if (snd_sof_stream_suspend_ignored(sdev))
target_dsp_state = SOF_DSP_PM_D0;
else
target_dsp_state = SOF_DSP_PM_D3;
break;
default:
/* This case would be during runtime suspend */
target_dsp_state = SOF_DSP_PM_D3;
break;
}
return target_dsp_state;
}
static int sof_send_pm_ctx_ipc(struct snd_sof_dev *sdev, int cmd)
{
struct sof_ipc_pm_ctx pm_ctx;
struct sof_ipc_reply reply;
memset(&pm_ctx, 0, sizeof(pm_ctx));
/* configure ctx save ipc message */
pm_ctx.hdr.size = sizeof(pm_ctx);
pm_ctx.hdr.cmd = SOF_IPC_GLB_PM_MSG | cmd;
/* send ctx save ipc to dsp */
return sof_ipc_tx_message(sdev->ipc, pm_ctx.hdr.cmd, &pm_ctx,
sizeof(pm_ctx), &reply, sizeof(reply));
}
#if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE)
static void sof_cache_debugfs(struct snd_sof_dev *sdev)
{
struct snd_sof_dfsentry *dfse;
list_for_each_entry(dfse, &sdev->dfsentry_list, list) {
/* nothing to do if debugfs buffer is not IO mem */
if (dfse->type == SOF_DFSENTRY_TYPE_BUF)
continue;
/* cache memory that is only accessible in D0 */
if (dfse->access_type == SOF_DEBUGFS_ACCESS_D0_ONLY)
memcpy_fromio(dfse->cache_buf, dfse->io_mem,
dfse->size);
}
}
#endif
static int sof_resume(struct device *dev, bool runtime_resume)
{
struct snd_sof_dev *sdev = dev_get_drvdata(dev);
ASoC: SOF: Move DSP power state transitions to platform-specific ops The DSP device substates such as D0I0/D0I3 are platform-specific. Therefore, the d0_substate field of struct snd_sof_dev is replaced with the dsp_power_state field which represents the current state of the DSP. This field holds both the device state and the platform-specific substate values. With the DSP device substates being platform-specific, the DSP power state transitions need to be performed in the platform-specific suspend/resume ops as well. In order to achieve this, the ops signature has to be modified to pass the target device state as an argument. The target substate will be determined by the platform-specific ops before performing the transition. For example, in the case of the system suspending to S0IX, the top-level SOF device suspend callback needs to only determine if the DSP will be entering D3 or remain in D0. The target substate in case the device needs to remain in D0 (D0I0 or D0I3) will be determined by the platform-specific suspend op. With the addition of the extended set of power states for the DSP, the set_power_state op for HDA platforms has to be extended to handle only the appropriate state transitions. So, the implementation for the Intel HDA platforms is also modified. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200129220726.31792-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-30 01:07:22 +03:00
u32 old_state = sdev->dsp_power_state.state;
int ret;
/* do nothing if dsp resume callbacks are not set */
if (!runtime_resume && !sof_ops(sdev)->resume)
return 0;
if (runtime_resume && !sof_ops(sdev)->runtime_resume)
return 0;
/* DSP was never successfully started, nothing to resume */
if (sdev->first_boot)
return 0;
/*
* if the runtime_resume flag is set, call the runtime_resume routine
* or else call the system resume routine
*/
if (runtime_resume)
ret = snd_sof_dsp_runtime_resume(sdev);
else
ret = snd_sof_dsp_resume(sdev);
if (ret < 0) {
dev_err(sdev->dev,
"error: failed to power up DSP after resume\n");
return ret;
}
ASoC: SOF: Move DSP power state transitions to platform-specific ops The DSP device substates such as D0I0/D0I3 are platform-specific. Therefore, the d0_substate field of struct snd_sof_dev is replaced with the dsp_power_state field which represents the current state of the DSP. This field holds both the device state and the platform-specific substate values. With the DSP device substates being platform-specific, the DSP power state transitions need to be performed in the platform-specific suspend/resume ops as well. In order to achieve this, the ops signature has to be modified to pass the target device state as an argument. The target substate will be determined by the platform-specific ops before performing the transition. For example, in the case of the system suspending to S0IX, the top-level SOF device suspend callback needs to only determine if the DSP will be entering D3 or remain in D0. The target substate in case the device needs to remain in D0 (D0I0 or D0I3) will be determined by the platform-specific suspend op. With the addition of the extended set of power states for the DSP, the set_power_state op for HDA platforms has to be extended to handle only the appropriate state transitions. So, the implementation for the Intel HDA platforms is also modified. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200129220726.31792-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-30 01:07:22 +03:00
/* Nothing further to do if resuming from a low-power D0 substate */
if (!runtime_resume && old_state == SOF_DSP_PM_D0)
return 0;
sdev->fw_state = SOF_FW_BOOT_PREPARE;
/* load the firmware */
ret = snd_sof_load_firmware(sdev);
if (ret < 0) {
dev_err(sdev->dev,
"error: failed to load DSP firmware after resume %d\n",
ret);
return ret;
}
sdev->fw_state = SOF_FW_BOOT_IN_PROGRESS;
/*
* Boot the firmware. The FW boot status will be modified
* in snd_sof_run_firmware() depending on the outcome.
*/
ret = snd_sof_run_firmware(sdev);
if (ret < 0) {
dev_err(sdev->dev,
"error: failed to boot DSP firmware after resume %d\n",
ret);
return ret;
}
/* resume DMA trace, only need send ipc */
ret = snd_sof_init_trace_ipc(sdev);
if (ret < 0) {
/* non fatal */
dev_warn(sdev->dev,
"warning: failed to init trace after resume %d\n",
ret);
}
/* restore pipelines */
ret = sof_restore_pipelines(sdev->dev);
if (ret < 0) {
dev_err(sdev->dev,
"error: failed to restore pipeline after resume %d\n",
ret);
return ret;
}
/* notify DSP of system resume */
ret = sof_send_pm_ctx_ipc(sdev, SOF_IPC_PM_CTX_RESTORE);
if (ret < 0)
dev_err(sdev->dev,
"error: ctx_restore ipc error during resume %d\n",
ret);
return ret;
}
static int sof_suspend(struct device *dev, bool runtime_suspend)
{
struct snd_sof_dev *sdev = dev_get_drvdata(dev);
ASoC: SOF: Move DSP power state transitions to platform-specific ops The DSP device substates such as D0I0/D0I3 are platform-specific. Therefore, the d0_substate field of struct snd_sof_dev is replaced with the dsp_power_state field which represents the current state of the DSP. This field holds both the device state and the platform-specific substate values. With the DSP device substates being platform-specific, the DSP power state transitions need to be performed in the platform-specific suspend/resume ops as well. In order to achieve this, the ops signature has to be modified to pass the target device state as an argument. The target substate will be determined by the platform-specific ops before performing the transition. For example, in the case of the system suspending to S0IX, the top-level SOF device suspend callback needs to only determine if the DSP will be entering D3 or remain in D0. The target substate in case the device needs to remain in D0 (D0I0 or D0I3) will be determined by the platform-specific suspend op. With the addition of the extended set of power states for the DSP, the set_power_state op for HDA platforms has to be extended to handle only the appropriate state transitions. So, the implementation for the Intel HDA platforms is also modified. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200129220726.31792-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-30 01:07:22 +03:00
u32 target_state = 0;
int ret;
/* do nothing if dsp suspend callback is not set */
if (!runtime_suspend && !sof_ops(sdev)->suspend)
return 0;
if (runtime_suspend && !sof_ops(sdev)->runtime_suspend)
return 0;
if (sdev->fw_state != SOF_FW_BOOT_COMPLETE)
goto suspend;
/* set restore_stream for all streams during system suspend */
if (!runtime_suspend) {
ret = sof_set_hw_params_upon_resume(sdev->dev);
if (ret < 0) {
dev_err(sdev->dev,
"error: setting hw_params flag during suspend %d\n",
ret);
return ret;
}
}
ASoC: SOF: Move DSP power state transitions to platform-specific ops The DSP device substates such as D0I0/D0I3 are platform-specific. Therefore, the d0_substate field of struct snd_sof_dev is replaced with the dsp_power_state field which represents the current state of the DSP. This field holds both the device state and the platform-specific substate values. With the DSP device substates being platform-specific, the DSP power state transitions need to be performed in the platform-specific suspend/resume ops as well. In order to achieve this, the ops signature has to be modified to pass the target device state as an argument. The target substate will be determined by the platform-specific ops before performing the transition. For example, in the case of the system suspending to S0IX, the top-level SOF device suspend callback needs to only determine if the DSP will be entering D3 or remain in D0. The target substate in case the device needs to remain in D0 (D0I0 or D0I3) will be determined by the platform-specific suspend op. With the addition of the extended set of power states for the DSP, the set_power_state op for HDA platforms has to be extended to handle only the appropriate state transitions. So, the implementation for the Intel HDA platforms is also modified. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200129220726.31792-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-30 01:07:22 +03:00
target_state = snd_sof_dsp_power_target(sdev);
ASoC: SOF: Move DSP power state transitions to platform-specific ops The DSP device substates such as D0I0/D0I3 are platform-specific. Therefore, the d0_substate field of struct snd_sof_dev is replaced with the dsp_power_state field which represents the current state of the DSP. This field holds both the device state and the platform-specific substate values. With the DSP device substates being platform-specific, the DSP power state transitions need to be performed in the platform-specific suspend/resume ops as well. In order to achieve this, the ops signature has to be modified to pass the target device state as an argument. The target substate will be determined by the platform-specific ops before performing the transition. For example, in the case of the system suspending to S0IX, the top-level SOF device suspend callback needs to only determine if the DSP will be entering D3 or remain in D0. The target substate in case the device needs to remain in D0 (D0I0 or D0I3) will be determined by the platform-specific suspend op. With the addition of the extended set of power states for the DSP, the set_power_state op for HDA platforms has to be extended to handle only the appropriate state transitions. So, the implementation for the Intel HDA platforms is also modified. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200129220726.31792-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-30 01:07:22 +03:00
/* Skip to platform-specific suspend if DSP is entering D0 */
if (target_state == SOF_DSP_PM_D0)
goto suspend;
/* release trace */
snd_sof_release_trace(sdev);
#if IS_ENABLED(CONFIG_SND_SOC_SOF_DEBUG_ENABLE_DEBUGFS_CACHE)
/* cache debugfs contents during runtime suspend */
if (runtime_suspend)
sof_cache_debugfs(sdev);
#endif
/* notify DSP of upcoming power down */
ret = sof_send_pm_ctx_ipc(sdev, SOF_IPC_PM_CTX_SAVE);
if (ret == -EBUSY || ret == -EAGAIN) {
/*
* runtime PM has logic to handle -EBUSY/-EAGAIN so
* pass these errors up
*/
dev_err(sdev->dev,
"error: ctx_save ipc error during suspend %d\n",
ret);
return ret;
} else if (ret < 0) {
/* FW in unexpected state, continue to power down */
dev_warn(sdev->dev,
"ctx_save ipc error %d, proceeding with suspend\n",
ret);
}
suspend:
/* return if the DSP was not probed successfully */
if (sdev->fw_state == SOF_FW_BOOT_NOT_STARTED)
return 0;
/* platform-specific suspend */
if (runtime_suspend)
ret = snd_sof_dsp_runtime_suspend(sdev);
else
ASoC: SOF: Move DSP power state transitions to platform-specific ops The DSP device substates such as D0I0/D0I3 are platform-specific. Therefore, the d0_substate field of struct snd_sof_dev is replaced with the dsp_power_state field which represents the current state of the DSP. This field holds both the device state and the platform-specific substate values. With the DSP device substates being platform-specific, the DSP power state transitions need to be performed in the platform-specific suspend/resume ops as well. In order to achieve this, the ops signature has to be modified to pass the target device state as an argument. The target substate will be determined by the platform-specific ops before performing the transition. For example, in the case of the system suspending to S0IX, the top-level SOF device suspend callback needs to only determine if the DSP will be entering D3 or remain in D0. The target substate in case the device needs to remain in D0 (D0I0 or D0I3) will be determined by the platform-specific suspend op. With the addition of the extended set of power states for the DSP, the set_power_state op for HDA platforms has to be extended to handle only the appropriate state transitions. So, the implementation for the Intel HDA platforms is also modified. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200129220726.31792-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-30 01:07:22 +03:00
ret = snd_sof_dsp_suspend(sdev, target_state);
if (ret < 0)
dev_err(sdev->dev,
"error: failed to power down DSP during suspend %d\n",
ret);
ASoC: SOF: Move DSP power state transitions to platform-specific ops The DSP device substates such as D0I0/D0I3 are platform-specific. Therefore, the d0_substate field of struct snd_sof_dev is replaced with the dsp_power_state field which represents the current state of the DSP. This field holds both the device state and the platform-specific substate values. With the DSP device substates being platform-specific, the DSP power state transitions need to be performed in the platform-specific suspend/resume ops as well. In order to achieve this, the ops signature has to be modified to pass the target device state as an argument. The target substate will be determined by the platform-specific ops before performing the transition. For example, in the case of the system suspending to S0IX, the top-level SOF device suspend callback needs to only determine if the DSP will be entering D3 or remain in D0. The target substate in case the device needs to remain in D0 (D0I0 or D0I3) will be determined by the platform-specific suspend op. With the addition of the extended set of power states for the DSP, the set_power_state op for HDA platforms has to be extended to handle only the appropriate state transitions. So, the implementation for the Intel HDA platforms is also modified. Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200129220726.31792-6-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-01-30 01:07:22 +03:00
/* Do not reset FW state if DSP is in D0 */
if (target_state == SOF_DSP_PM_D0)
return ret;
/* reset FW state */
sdev->fw_state = SOF_FW_BOOT_NOT_STARTED;
return ret;
}
int snd_sof_dsp_power_down_notify(struct snd_sof_dev *sdev)
{
/* Notify DSP of upcoming power down */
if (sof_ops(sdev)->remove)
return sof_send_pm_ctx_ipc(sdev, SOF_IPC_PM_CTX_SAVE);
return 0;
}
int snd_sof_runtime_suspend(struct device *dev)
{
return sof_suspend(dev, true);
}
EXPORT_SYMBOL(snd_sof_runtime_suspend);
int snd_sof_runtime_idle(struct device *dev)
{
struct snd_sof_dev *sdev = dev_get_drvdata(dev);
return snd_sof_dsp_runtime_idle(sdev);
}
EXPORT_SYMBOL(snd_sof_runtime_idle);
int snd_sof_runtime_resume(struct device *dev)
{
return sof_resume(dev, true);
}
EXPORT_SYMBOL(snd_sof_runtime_resume);
int snd_sof_resume(struct device *dev)
{
return sof_resume(dev, false);
}
EXPORT_SYMBOL(snd_sof_resume);
int snd_sof_suspend(struct device *dev)
{
return sof_suspend(dev, false);
}
EXPORT_SYMBOL(snd_sof_suspend);
int snd_sof_prepare(struct device *dev)
{
struct snd_sof_dev *sdev = dev_get_drvdata(dev);
#if defined(CONFIG_ACPI)
if (acpi_target_system_state() == ACPI_STATE_S0)
sdev->system_suspend_target = SOF_SUSPEND_S0IX;
else
sdev->system_suspend_target = SOF_SUSPEND_S3;
#else
/* will suspend to S3 by default */
sdev->system_suspend_target = SOF_SUSPEND_S3;
#endif
return 0;
}
EXPORT_SYMBOL(snd_sof_prepare);
void snd_sof_complete(struct device *dev)
{
struct snd_sof_dev *sdev = dev_get_drvdata(dev);
sdev->system_suspend_target = SOF_SUSPEND_NONE;
}
EXPORT_SYMBOL(snd_sof_complete);