WSL2-Linux-Kernel/drivers/cpufreq/cpufreq_governor.h

281 строка
8.4 KiB
C
Исходник Обычный вид История

/*
* drivers/cpufreq/cpufreq_governor.h
*
* Header file for CPUFreq governors common code
*
* Copyright (C) 2001 Russell King
* (C) 2003 Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>.
* (C) 2003 Jun Nakajima <jun.nakajima@intel.com>
* (C) 2009 Alexander Clouter <alex@digriz.org.uk>
* (c) 2012 Viresh Kumar <viresh.kumar@linaro.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef _CPUFREQ_GOVERNOR_H
#define _CPUFREQ_GOVERNOR_H
#include <linux/cpufreq.h>
#include <linux/kernel_stat.h>
#include <linux/module.h>
#include <linux/mutex.h>
/*
* The polling frequency depends on the capability of the processor. Default
* polling frequency is 1000 times the transition latency of the processor. The
* governor will work on any processor with transition latency <= 10ms, using
* appropriate sampling rate.
*
* For CPUs with transition latency > 10ms (mostly drivers with CPUFREQ_ETERNAL)
* this governor will not work. All times here are in us (micro seconds).
*/
#define MIN_SAMPLING_RATE_RATIO (2)
#define LATENCY_MULTIPLIER (1000)
#define MIN_LATENCY_MULTIPLIER (20)
#define TRANSITION_LATENCY_LIMIT (10 * 1000 * 1000)
/* Ondemand Sampling types */
enum {OD_NORMAL_SAMPLE, OD_SUB_SAMPLE};
/*
* Macro for creating governors sysfs routines
*
* - gov_sys: One governor instance per whole system
* - gov_pol: One governor instance per policy
*/
/* Create attributes */
#define gov_sys_attr_ro(_name) \
static struct global_attr _name##_gov_sys = \
__ATTR(_name, 0444, show_##_name##_gov_sys, NULL)
#define gov_sys_attr_rw(_name) \
static struct global_attr _name##_gov_sys = \
__ATTR(_name, 0644, show_##_name##_gov_sys, store_##_name##_gov_sys)
#define gov_pol_attr_ro(_name) \
static struct freq_attr _name##_gov_pol = \
__ATTR(_name, 0444, show_##_name##_gov_pol, NULL)
#define gov_pol_attr_rw(_name) \
static struct freq_attr _name##_gov_pol = \
__ATTR(_name, 0644, show_##_name##_gov_pol, store_##_name##_gov_pol)
#define gov_sys_pol_attr_rw(_name) \
gov_sys_attr_rw(_name); \
gov_pol_attr_rw(_name)
#define gov_sys_pol_attr_ro(_name) \
gov_sys_attr_ro(_name); \
gov_pol_attr_ro(_name)
/* Create show/store routines */
#define show_one(_gov, file_name) \
static ssize_t show_##file_name##_gov_sys \
(struct kobject *kobj, struct attribute *attr, char *buf) \
{ \
struct _gov##_dbs_tuners *tuners = _gov##_dbs_cdata.gdbs_data->tuners; \
return sprintf(buf, "%u\n", tuners->file_name); \
} \
\
static ssize_t show_##file_name##_gov_pol \
(struct cpufreq_policy *policy, char *buf) \
{ \
struct dbs_data *dbs_data = policy->governor_data; \
struct _gov##_dbs_tuners *tuners = dbs_data->tuners; \
return sprintf(buf, "%u\n", tuners->file_name); \
}
#define store_one(_gov, file_name) \
static ssize_t store_##file_name##_gov_sys \
(struct kobject *kobj, struct attribute *attr, const char *buf, size_t count) \
{ \
struct dbs_data *dbs_data = _gov##_dbs_cdata.gdbs_data; \
return store_##file_name(dbs_data, buf, count); \
} \
\
static ssize_t store_##file_name##_gov_pol \
(struct cpufreq_policy *policy, const char *buf, size_t count) \
{ \
struct dbs_data *dbs_data = policy->governor_data; \
return store_##file_name(dbs_data, buf, count); \
}
#define show_store_one(_gov, file_name) \
show_one(_gov, file_name); \
store_one(_gov, file_name)
/* create helper routines */
#define define_get_cpu_dbs_routines(_dbs_info) \
static struct cpu_dbs_common_info *get_cpu_cdbs(int cpu) \
{ \
return &per_cpu(_dbs_info, cpu).cdbs; \
} \
\
static void *get_cpu_dbs_info_s(int cpu) \
{ \
return &per_cpu(_dbs_info, cpu); \
}
/*
* Abbreviations:
* dbs: used as a shortform for demand based switching It helps to keep variable
* names smaller, simpler
* cdbs: common dbs
* od_*: On-demand governor
* cs_*: Conservative governor
*/
/* Per cpu structures */
struct cpu_dbs_common_info {
int cpu;
u64 prev_cpu_idle;
u64 prev_cpu_wall;
u64 prev_cpu_nice;
cpufreq: governor: Be friendly towards latency-sensitive bursty workloads Cpufreq governors like the ondemand governor calculate the load on the CPU periodically by employing deferrable timers. A deferrable timer won't fire if the CPU is completely idle (and there are no other timers to be run), in order to avoid unnecessary wakeups and thus save CPU power. However, the load calculation logic is agnostic to all this, and this can lead to the problem described below. Time (ms) CPU 1 100 Task-A running 110 Governor's timer fires, finds load as 100% in the last 10ms interval and increases the CPU frequency. 110.5 Task-A running 120 Governor's timer fires, finds load as 100% in the last 10ms interval and increases the CPU frequency. 125 Task-A went to sleep. With nothing else to do, CPU 1 went completely idle. 200 Task-A woke up and started running again. 200.5 Governor's deferred timer (which was originally programmed to fire at time 130) fires now. It calculates load for the time period 120 to 200.5, and finds the load is almost zero. Hence it decreases the CPU frequency to the minimum. 210 Governor's timer fires, finds load as 100% in the last 10ms interval and increases the CPU frequency. So, after the workload woke up and started running, the frequency was suddenly dropped to absolute minimum, and after that, there was an unnecessary delay of 10ms (sampling period) to increase the CPU frequency back to a reasonable value. And this pattern repeats for every wake-up-from-cpu-idle for that workload. This can be quite undesirable for latency- or response-time sensitive bursty workloads. So we need to fix the governor's logic to detect such wake-up-from- cpu-idle scenarios and start the workload at a reasonably high CPU frequency. One extreme solution would be to fake a load of 100% in such scenarios. But that might lead to undesirable side-effects such as frequency spikes (which might also need voltage changes) especially if the previous frequency happened to be very low. We just want to avoid the stupidity of dropping down the frequency to a minimum and then enduring a needless (and long) delay before ramping it up back again. So, let us simply carry forward the previous load - that is, let us just pretend that the 'load' for the current time-window is the same as the load for the previous window. That way, the frequency and voltage will continue to be set to whatever values they were set at previously. This means that bursty workloads will get a chance to influence the CPU frequency at which they wake up from cpu-idle, based on their past execution history. Thus, they might be able to avoid suffering from slow wakeups and long response-times. However, we should take care not to over-do this. For example, such a "copy previous load" logic will benefit cases like this: (where # represents busy and . represents idle) ##########.........#########.........###########...........##########........ but it will be detrimental in cases like the one shown below, because it will retain the high frequency (copied from the previous interval) even in a mostly idle system: ##########.........#.................#.....................#............... (i.e., the workload finished and the remaining tasks are such that their busy periods are smaller than the sampling interval, which causes the timer to always get deferred. So, this will make the copy-previous-load logic copy the initial high load to subsequent idle periods over and over again, thus keeping the frequency high unnecessarily). So, we modify this copy-previous-load logic such that it is used only once upon every wakeup-from-idle. Thus if we have 2 consecutive idle periods, the previous load won't get blindly copied over; cpufreq will freshly evaluate the load in the second idle interval, thus ensuring that the system comes back to its normal state. [ The right way to solve this whole problem is to teach the CPU frequency governors to also track load on a per-task basis, not just a per-CPU basis, and then use both the data sources intelligently to set the appropriate frequency on the CPUs. But that involves redesigning the cpufreq subsystem, so this patch should make the situation bearable until then. ] Experimental results: +-------------------+ I ran a modified version of ebizzy (called 'sleeping-ebizzy') that sleeps in between its execution such that its total utilization can be a user-defined value, say 10% or 20% (higher the utilization specified, lesser the amount of sleeps injected). This ebizzy was run with a single-thread, tied to CPU 8. Behavior observed with tracing (sample taken from 40% utilization runs): ------------------------------------------------------------------------ Without patch: ~~~~~~~~~~~~~~ kworker/8:2-12137 416.335742: cpu_frequency: state=2061000 cpu_id=8 kworker/8:2-12137 416.335744: sched_switch: prev_comm=kworker/8:2 ==> next_comm=ebizzy <...>-40753 416.345741: sched_switch: prev_comm=ebizzy ==> next_comm=kworker/8:2 kworker/8:2-12137 416.345744: cpu_frequency: state=4123000 cpu_id=8 kworker/8:2-12137 416.345746: sched_switch: prev_comm=kworker/8:2 ==> next_comm=ebizzy <...>-40753 416.355738: sched_switch: prev_comm=ebizzy ==> next_comm=kworker/8:2 <snip> --------------------------------------------------------------------- <snip> <...>-40753 416.402202: sched_switch: prev_comm=ebizzy ==> next_comm=swapper/8 <idle>-0 416.502130: sched_switch: prev_comm=swapper/8 ==> next_comm=ebizzy <...>-40753 416.505738: sched_switch: prev_comm=ebizzy ==> next_comm=kworker/8:2 kworker/8:2-12137 416.505739: cpu_frequency: state=2061000 cpu_id=8 kworker/8:2-12137 416.505741: sched_switch: prev_comm=kworker/8:2 ==> next_comm=ebizzy <...>-40753 416.515739: sched_switch: prev_comm=ebizzy ==> next_comm=kworker/8:2 kworker/8:2-12137 416.515742: cpu_frequency: state=4123000 cpu_id=8 kworker/8:2-12137 416.515744: sched_switch: prev_comm=kworker/8:2 ==> next_comm=ebizzy Observation: Ebizzy went idle at 416.402202, and started running again at 416.502130. But cpufreq noticed the long idle period, and dropped the frequency at 416.505739, only to increase it back again at 416.515742, realizing that the workload is in-fact CPU bound. Thus ebizzy needlessly ran at the lowest frequency for almost 13 milliseconds (almost 1 full sample period), and this pattern repeats on every sleep-wakeup. This could hurt latency-sensitive workloads quite a lot. With patch: ~~~~~~~~~~~ kworker/8:2-29802 464.832535: cpu_frequency: state=2061000 cpu_id=8 <snip> --------------------------------------------------------------------- <snip> kworker/8:2-29802 464.962538: sched_switch: prev_comm=kworker/8:2 ==> next_comm=ebizzy <...>-40738 464.972533: sched_switch: prev_comm=ebizzy ==> next_comm=kworker/8:2 kworker/8:2-29802 464.972536: cpu_frequency: state=4123000 cpu_id=8 kworker/8:2-29802 464.972538: sched_switch: prev_comm=kworker/8:2 ==> next_comm=ebizzy <...>-40738 464.982531: sched_switch: prev_comm=ebizzy ==> next_comm=kworker/8:2 <snip> --------------------------------------------------------------------- <snip> kworker/8:2-29802 465.022533: sched_switch: prev_comm=kworker/8:2 ==> next_comm=ebizzy <...>-40738 465.032531: sched_switch: prev_comm=ebizzy ==> next_comm=kworker/8:2 kworker/8:2-29802 465.032532: sched_switch: prev_comm=kworker/8:2 ==> next_comm=ebizzy <...>-40738 465.035797: sched_switch: prev_comm=ebizzy ==> next_comm=swapper/8 <idle>-0 465.240178: sched_switch: prev_comm=swapper/8 ==> next_comm=ebizzy <...>-40738 465.242533: sched_switch: prev_comm=ebizzy ==> next_comm=kworker/8:2 kworker/8:2-29802 465.242535: sched_switch: prev_comm=kworker/8:2 ==> next_comm=ebizzy <...>-40738 465.252531: sched_switch: prev_comm=ebizzy ==> next_comm=kworker/8:2 Observation: Ebizzy went idle at 465.035797, and started running again at 465.240178. Since ebizzy was the only real workload running on this CPU, cpufreq retained the frequency at 4.1Ghz throughout the run of ebizzy, no matter how many times ebizzy slept and woke-up in-between. Thus, ebizzy got the 10ms worth of 4.1 Ghz benefit during every sleep-wakeup (as compared to the run without the patch) and this boost gave a modest improvement in total throughput, as shown below. Sleeping-ebizzy records-per-second: ----------------------------------- Utilization Without patch With patch Difference (Absolute and % values) 10% 274767 277046 + 2279 (+0.829%) 20% 543429 553484 + 10055 (+1.850%) 40% 1090744 1107959 + 17215 (+1.578%) 60% 1634908 1662018 + 27110 (+1.658%) A rudimentary and somewhat approximately latency-sensitive workload such as sleeping-ebizzy itself showed a consistent, noticeable performance improvement with this patch. Hence, workloads that are truly latency-sensitive will benefit quite a bit from this change. Moreover, this is an overall win-win since this patch does not hurt power-savings at all (because, this patch does not reduce the idle time or idle residency; and the high frequency of the CPU when it goes to cpu-idle does not affect/hurt the power-savings of deep idle states). Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-06-08 00:41:43 +04:00
/*
2014-06-09 12:51:24 +04:00
* Used to keep track of load in the previous interval. However, when
* explicitly set to zero, it is used as a flag to ensure that we copy
* the previous load to the current interval only once, upon the first
* wake-up from idle.
cpufreq: governor: Be friendly towards latency-sensitive bursty workloads Cpufreq governors like the ondemand governor calculate the load on the CPU periodically by employing deferrable timers. A deferrable timer won't fire if the CPU is completely idle (and there are no other timers to be run), in order to avoid unnecessary wakeups and thus save CPU power. However, the load calculation logic is agnostic to all this, and this can lead to the problem described below. Time (ms) CPU 1 100 Task-A running 110 Governor's timer fires, finds load as 100% in the last 10ms interval and increases the CPU frequency. 110.5 Task-A running 120 Governor's timer fires, finds load as 100% in the last 10ms interval and increases the CPU frequency. 125 Task-A went to sleep. With nothing else to do, CPU 1 went completely idle. 200 Task-A woke up and started running again. 200.5 Governor's deferred timer (which was originally programmed to fire at time 130) fires now. It calculates load for the time period 120 to 200.5, and finds the load is almost zero. Hence it decreases the CPU frequency to the minimum. 210 Governor's timer fires, finds load as 100% in the last 10ms interval and increases the CPU frequency. So, after the workload woke up and started running, the frequency was suddenly dropped to absolute minimum, and after that, there was an unnecessary delay of 10ms (sampling period) to increase the CPU frequency back to a reasonable value. And this pattern repeats for every wake-up-from-cpu-idle for that workload. This can be quite undesirable for latency- or response-time sensitive bursty workloads. So we need to fix the governor's logic to detect such wake-up-from- cpu-idle scenarios and start the workload at a reasonably high CPU frequency. One extreme solution would be to fake a load of 100% in such scenarios. But that might lead to undesirable side-effects such as frequency spikes (which might also need voltage changes) especially if the previous frequency happened to be very low. We just want to avoid the stupidity of dropping down the frequency to a minimum and then enduring a needless (and long) delay before ramping it up back again. So, let us simply carry forward the previous load - that is, let us just pretend that the 'load' for the current time-window is the same as the load for the previous window. That way, the frequency and voltage will continue to be set to whatever values they were set at previously. This means that bursty workloads will get a chance to influence the CPU frequency at which they wake up from cpu-idle, based on their past execution history. Thus, they might be able to avoid suffering from slow wakeups and long response-times. However, we should take care not to over-do this. For example, such a "copy previous load" logic will benefit cases like this: (where # represents busy and . represents idle) ##########.........#########.........###########...........##########........ but it will be detrimental in cases like the one shown below, because it will retain the high frequency (copied from the previous interval) even in a mostly idle system: ##########.........#.................#.....................#............... (i.e., the workload finished and the remaining tasks are such that their busy periods are smaller than the sampling interval, which causes the timer to always get deferred. So, this will make the copy-previous-load logic copy the initial high load to subsequent idle periods over and over again, thus keeping the frequency high unnecessarily). So, we modify this copy-previous-load logic such that it is used only once upon every wakeup-from-idle. Thus if we have 2 consecutive idle periods, the previous load won't get blindly copied over; cpufreq will freshly evaluate the load in the second idle interval, thus ensuring that the system comes back to its normal state. [ The right way to solve this whole problem is to teach the CPU frequency governors to also track load on a per-task basis, not just a per-CPU basis, and then use both the data sources intelligently to set the appropriate frequency on the CPUs. But that involves redesigning the cpufreq subsystem, so this patch should make the situation bearable until then. ] Experimental results: +-------------------+ I ran a modified version of ebizzy (called 'sleeping-ebizzy') that sleeps in between its execution such that its total utilization can be a user-defined value, say 10% or 20% (higher the utilization specified, lesser the amount of sleeps injected). This ebizzy was run with a single-thread, tied to CPU 8. Behavior observed with tracing (sample taken from 40% utilization runs): ------------------------------------------------------------------------ Without patch: ~~~~~~~~~~~~~~ kworker/8:2-12137 416.335742: cpu_frequency: state=2061000 cpu_id=8 kworker/8:2-12137 416.335744: sched_switch: prev_comm=kworker/8:2 ==> next_comm=ebizzy <...>-40753 416.345741: sched_switch: prev_comm=ebizzy ==> next_comm=kworker/8:2 kworker/8:2-12137 416.345744: cpu_frequency: state=4123000 cpu_id=8 kworker/8:2-12137 416.345746: sched_switch: prev_comm=kworker/8:2 ==> next_comm=ebizzy <...>-40753 416.355738: sched_switch: prev_comm=ebizzy ==> next_comm=kworker/8:2 <snip> --------------------------------------------------------------------- <snip> <...>-40753 416.402202: sched_switch: prev_comm=ebizzy ==> next_comm=swapper/8 <idle>-0 416.502130: sched_switch: prev_comm=swapper/8 ==> next_comm=ebizzy <...>-40753 416.505738: sched_switch: prev_comm=ebizzy ==> next_comm=kworker/8:2 kworker/8:2-12137 416.505739: cpu_frequency: state=2061000 cpu_id=8 kworker/8:2-12137 416.505741: sched_switch: prev_comm=kworker/8:2 ==> next_comm=ebizzy <...>-40753 416.515739: sched_switch: prev_comm=ebizzy ==> next_comm=kworker/8:2 kworker/8:2-12137 416.515742: cpu_frequency: state=4123000 cpu_id=8 kworker/8:2-12137 416.515744: sched_switch: prev_comm=kworker/8:2 ==> next_comm=ebizzy Observation: Ebizzy went idle at 416.402202, and started running again at 416.502130. But cpufreq noticed the long idle period, and dropped the frequency at 416.505739, only to increase it back again at 416.515742, realizing that the workload is in-fact CPU bound. Thus ebizzy needlessly ran at the lowest frequency for almost 13 milliseconds (almost 1 full sample period), and this pattern repeats on every sleep-wakeup. This could hurt latency-sensitive workloads quite a lot. With patch: ~~~~~~~~~~~ kworker/8:2-29802 464.832535: cpu_frequency: state=2061000 cpu_id=8 <snip> --------------------------------------------------------------------- <snip> kworker/8:2-29802 464.962538: sched_switch: prev_comm=kworker/8:2 ==> next_comm=ebizzy <...>-40738 464.972533: sched_switch: prev_comm=ebizzy ==> next_comm=kworker/8:2 kworker/8:2-29802 464.972536: cpu_frequency: state=4123000 cpu_id=8 kworker/8:2-29802 464.972538: sched_switch: prev_comm=kworker/8:2 ==> next_comm=ebizzy <...>-40738 464.982531: sched_switch: prev_comm=ebizzy ==> next_comm=kworker/8:2 <snip> --------------------------------------------------------------------- <snip> kworker/8:2-29802 465.022533: sched_switch: prev_comm=kworker/8:2 ==> next_comm=ebizzy <...>-40738 465.032531: sched_switch: prev_comm=ebizzy ==> next_comm=kworker/8:2 kworker/8:2-29802 465.032532: sched_switch: prev_comm=kworker/8:2 ==> next_comm=ebizzy <...>-40738 465.035797: sched_switch: prev_comm=ebizzy ==> next_comm=swapper/8 <idle>-0 465.240178: sched_switch: prev_comm=swapper/8 ==> next_comm=ebizzy <...>-40738 465.242533: sched_switch: prev_comm=ebizzy ==> next_comm=kworker/8:2 kworker/8:2-29802 465.242535: sched_switch: prev_comm=kworker/8:2 ==> next_comm=ebizzy <...>-40738 465.252531: sched_switch: prev_comm=ebizzy ==> next_comm=kworker/8:2 Observation: Ebizzy went idle at 465.035797, and started running again at 465.240178. Since ebizzy was the only real workload running on this CPU, cpufreq retained the frequency at 4.1Ghz throughout the run of ebizzy, no matter how many times ebizzy slept and woke-up in-between. Thus, ebizzy got the 10ms worth of 4.1 Ghz benefit during every sleep-wakeup (as compared to the run without the patch) and this boost gave a modest improvement in total throughput, as shown below. Sleeping-ebizzy records-per-second: ----------------------------------- Utilization Without patch With patch Difference (Absolute and % values) 10% 274767 277046 + 2279 (+0.829%) 20% 543429 553484 + 10055 (+1.850%) 40% 1090744 1107959 + 17215 (+1.578%) 60% 1634908 1662018 + 27110 (+1.658%) A rudimentary and somewhat approximately latency-sensitive workload such as sleeping-ebizzy itself showed a consistent, noticeable performance improvement with this patch. Hence, workloads that are truly latency-sensitive will benefit quite a bit from this change. Moreover, this is an overall win-win since this patch does not hurt power-savings at all (because, this patch does not reduce the idle time or idle residency; and the high frequency of the CPU when it goes to cpu-idle does not affect/hurt the power-savings of deep idle states). Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-06-08 00:41:43 +04:00
*/
2014-06-09 12:51:24 +04:00
unsigned int prev_load;
struct cpufreq_policy *cur_policy;
struct delayed_work work;
/*
* percpu mutex that serializes governor limit change with gov_dbs_timer
* invocation. We do not want gov_dbs_timer to run when user is changing
* the governor or limits.
*/
struct mutex timer_mutex;
ktime_t time_stamp;
};
struct od_cpu_dbs_info_s {
struct cpu_dbs_common_info cdbs;
struct cpufreq_frequency_table *freq_table;
unsigned int freq_lo;
unsigned int freq_lo_jiffies;
unsigned int freq_hi_jiffies;
unsigned int rate_mult;
unsigned int sample_type:1;
};
struct cs_cpu_dbs_info_s {
struct cpu_dbs_common_info cdbs;
unsigned int down_skip;
unsigned int requested_freq;
unsigned int enable:1;
};
/* Per policy Governors sysfs tunables */
struct od_dbs_tuners {
unsigned int ignore_nice_load;
unsigned int sampling_rate;
unsigned int sampling_down_factor;
unsigned int up_threshold;
unsigned int powersave_bias;
unsigned int io_is_busy;
};
struct cs_dbs_tuners {
unsigned int ignore_nice_load;
unsigned int sampling_rate;
unsigned int sampling_down_factor;
unsigned int up_threshold;
unsigned int down_threshold;
unsigned int freq_step;
};
/* Common Governor data across policies */
struct dbs_data;
struct common_dbs_data {
/* Common across governors */
#define GOV_ONDEMAND 0
#define GOV_CONSERVATIVE 1
int governor;
struct attribute_group *attr_group_gov_sys; /* one governor - system */
struct attribute_group *attr_group_gov_pol; /* one governor - policy */
/*
* Common data for platforms that don't set
* CPUFREQ_HAVE_GOVERNOR_PER_POLICY
*/
struct dbs_data *gdbs_data;
struct cpu_dbs_common_info *(*get_cpu_cdbs)(int cpu);
void *(*get_cpu_dbs_info_s)(int cpu);
void (*gov_dbs_timer)(struct work_struct *work);
void (*gov_check_cpu)(int cpu, unsigned int load);
int (*init)(struct dbs_data *dbs_data);
void (*exit)(struct dbs_data *dbs_data);
/* Governor specific ops, see below */
void *gov_ops;
};
/* Governor Per policy data */
struct dbs_data {
struct common_dbs_data *cdata;
unsigned int min_sampling_rate;
int usage_count;
void *tuners;
/* dbs_mutex protects dbs_enable in governor start/stop */
struct mutex mutex;
};
/* Governor specific ops, will be passed to dbs_data->gov_ops */
struct od_ops {
void (*powersave_bias_init_cpu)(int cpu);
unsigned int (*powersave_bias_target)(struct cpufreq_policy *policy,
unsigned int freq_next, unsigned int relation);
void (*freq_increase)(struct cpufreq_policy *policy, unsigned int freq);
};
struct cs_ops {
struct notifier_block *notifier_block;
};
static inline int delay_for_sampling_rate(unsigned int sampling_rate)
{
int delay = usecs_to_jiffies(sampling_rate);
/* We want all CPUs to do sampling nearly on same jiffy */
if (num_online_cpus() > 1)
delay -= jiffies % delay;
return delay;
}
#define declare_show_sampling_rate_min(_gov) \
static ssize_t show_sampling_rate_min_gov_sys \
(struct kobject *kobj, struct attribute *attr, char *buf) \
{ \
struct dbs_data *dbs_data = _gov##_dbs_cdata.gdbs_data; \
return sprintf(buf, "%u\n", dbs_data->min_sampling_rate); \
} \
\
static ssize_t show_sampling_rate_min_gov_pol \
(struct cpufreq_policy *policy, char *buf) \
{ \
struct dbs_data *dbs_data = policy->governor_data; \
return sprintf(buf, "%u\n", dbs_data->min_sampling_rate); \
}
cpufreq: Fix timer/workqueue corruption by protecting reading governor_enabled When a CPU is hot removed we'll cancel all the delayed work items via gov_cancel_work(). Sometimes the delayed work function determines that it should adjust the delay for all other CPUs that the policy is managing. If this scenario occurs, the canceling CPU will cancel its own work but queue up the other CPUs works to run. Commit 3617f2 (cpufreq: Fix timer/workqueue corruption due to double queueing) has tried to fix this, but reading governor_enabled is not protected by cpufreq_governor_lock. Even though od_dbs_timer() checks governor_enabled before gov_queue_work(), this scenario may occur. For example: CPU0 CPU1 ---- ---- cpu_down() ... <work runs> __cpufreq_remove_dev() od_dbs_timer() __cpufreq_governor() policy->governor_enabled policy->governor_enabled = false; cpufreq_governor_dbs() case CPUFREQ_GOV_STOP: gov_cancel_work(dbs_data, policy); cpu0 work is canceled timer is canceled cpu1 work is canceled <waits for cpu1> gov_queue_work(*, *, true); cpu0 work queued cpu1 work queued cpu2 work queued ... cpu1 work is canceled cpu2 work is canceled ... At the end of the GOV_STOP case cpu0 still has a work queued to run although the code is expecting all of the works to be canceled. __cpufreq_remove_dev() will then proceed to re-initialize all the other CPUs works except for the CPU that is going down. The CPUFREQ_GOV_START case in cpufreq_governor_dbs() will trample over the queued work and debugobjects will spit out a warning: WARNING: at lib/debugobjects.c:260 debug_print_object+0x94/0xbc() ODEBUG: init active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x14 Modules linked in: CPU: 1 PID: 1205 Comm: sh Tainted: G W 3.10.0 #200 [<c01144f0>] (unwind_backtrace+0x0/0xf8) from [<c0111d98>] (show_stack+0x10/0x14) [<c0111d98>] (show_stack+0x10/0x14) from [<c01272cc>] (warn_slowpath_common+0x4c/0x68) [<c01272cc>] (warn_slowpath_common+0x4c/0x68) from [<c012737c>] (warn_slowpath_fmt+0x30/0x40) [<c012737c>] (warn_slowpath_fmt+0x30/0x40) from [<c034c640>] (debug_print_object+0x94/0xbc) [<c034c640>] (debug_print_object+0x94/0xbc) from [<c034c7f8>] (__debug_object_init+0xc8/0x3c0) [<c034c7f8>] (__debug_object_init+0xc8/0x3c0) from [<c01360e0>] (init_timer_key+0x20/0x104) [<c01360e0>] (init_timer_key+0x20/0x104) from [<c04872ac>] (cpufreq_governor_dbs+0x1dc/0x68c) [<c04872ac>] (cpufreq_governor_dbs+0x1dc/0x68c) from [<c04833a8>] (__cpufreq_governor+0x80/0x1b0) [<c04833a8>] (__cpufreq_governor+0x80/0x1b0) from [<c0483704>] (__cpufreq_remove_dev.isra.12+0x22c/0x380) [<c0483704>] (__cpufreq_remove_dev.isra.12+0x22c/0x380) from [<c0692f38>] (cpufreq_cpu_callback+0x48/0x5c) [<c0692f38>] (cpufreq_cpu_callback+0x48/0x5c) from [<c014fb40>] (notifier_call_chain+0x44/0x84) [<c014fb40>] (notifier_call_chain+0x44/0x84) from [<c012ae44>] (__cpu_notify+0x2c/0x48) [<c012ae44>] (__cpu_notify+0x2c/0x48) from [<c068dd40>] (_cpu_down+0x80/0x258) [<c068dd40>] (_cpu_down+0x80/0x258) from [<c068df40>] (cpu_down+0x28/0x3c) [<c068df40>] (cpu_down+0x28/0x3c) from [<c068e4c0>] (store_online+0x30/0x74) [<c068e4c0>] (store_online+0x30/0x74) from [<c03a7308>] (dev_attr_store+0x18/0x24) [<c03a7308>] (dev_attr_store+0x18/0x24) from [<c0256fe0>] (sysfs_write_file+0x100/0x180) [<c0256fe0>] (sysfs_write_file+0x100/0x180) from [<c01fec9c>] (vfs_write+0xbc/0x184) [<c01fec9c>] (vfs_write+0xbc/0x184) from [<c01ff034>] (SyS_write+0x40/0x68) [<c01ff034>] (SyS_write+0x40/0x68) from [<c010e200>] (ret_fast_syscall+0x0/0x48) In gov_queue_work(), lock cpufreq_governor_lock before gov_queue_work, and unlock it after __gov_queue_work(). In this way, governor_enabled is guaranteed not changed in gov_queue_work(). Signed-off-by: Jane Li <jiel@marvell.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-01-03 13:17:41 +04:00
extern struct mutex cpufreq_governor_lock;
void dbs_check_cpu(struct dbs_data *dbs_data, int cpu);
bool need_load_eval(struct cpu_dbs_common_info *cdbs,
unsigned int sampling_rate);
int cpufreq_governor_dbs(struct cpufreq_policy *policy,
struct common_dbs_data *cdata, unsigned int event);
void gov_queue_work(struct dbs_data *dbs_data, struct cpufreq_policy *policy,
unsigned int delay, bool all_cpus);
void od_register_powersave_bias_handler(unsigned int (*f)
(struct cpufreq_policy *, unsigned int, unsigned int),
unsigned int powersave_bias);
void od_unregister_powersave_bias_handler(void);
#endif /* _CPUFREQ_GOVERNOR_H */