WSL2-Linux-Kernel/drivers/mtd/mtdpart.c

1031 строка
28 KiB
C
Исходник Обычный вид История

/*
* Simple MTD partitioning layer
*
* Copyright © 2000 Nicolas Pitre <nico@fluxnic.net>
* Copyright © 2002 Thomas Gleixner <gleixner@linutronix.de>
* Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*
*/
#include <linux/module.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/kmod.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/err.h>
mtd: partitions: add of_match_table parser matching for the "ofpart" type In order to properly support compatibility strings as described in the bindings/mtd/partition.txt "ofpart" type should be treated as an indication for looking into OF. MTD should check "compatible" property and search for a matching parser rather than blindly trying the one supporting "fixed-partitions". It also means that existing "fixed-partitions" parser should get renamed to use a more meaningful name. This commit achievies that aim by introducing a new mtd_part_of_parse(). It works by looking for a matching parser for every string in the "compatibility" property (starting with the most specific one). Please note that driver-specified parsers still take a precedence. It's assumed that driver providing a parser type has a good reason for that (e.g. having platform data with device-specific info). Also doing otherwise could break existing setups. The same applies to using default parsers (including "cmdlinepart") as some overwrite DT data with cmdline argument. Partition parsers can now provide an of_match_table to enable flash<-->parser matching via device tree as documented in the mtd/partition.txt. This support is currently limited to built-in parsers as it uses request_module() and friends. This should be sufficient for most cases though as compiling parsers as modules isn't a common choice. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Tested-by: Peter Rosin <peda@axentia.se> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-14 15:10:42 +03:00
#include <linux/of.h>
#include "mtdcore.h"
/* Our partition linked list */
static LIST_HEAD(mtd_partitions);
static DEFINE_MUTEX(mtd_partitions_mutex);
/**
* struct mtd_part - our partition node structure
*
* @mtd: struct holding partition details
* @parent: parent mtd - flash device or another partition
* @offset: partition offset relative to the *flash device*
*/
struct mtd_part {
struct mtd_info mtd;
struct mtd_info *parent;
uint64_t offset;
struct list_head list;
};
/*
* Given a pointer to the MTD object in the mtd_part structure, we can retrieve
* the pointer to that structure.
*/
static inline struct mtd_part *mtd_to_part(const struct mtd_info *mtd)
{
return container_of(mtd, struct mtd_part, mtd);
}
/*
* MTD methods which simply translate the effective address and pass through
* to the _real_ device.
*/
static int part_read(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, u_char *buf)
{
struct mtd_part *part = mtd_to_part(mtd);
struct mtd_ecc_stats stats;
int res;
stats = part->parent->ecc_stats;
res = part->parent->_read(part->parent, from + part->offset, len,
mtd: fix partition wrapper functions This patch reverts a change that may have been mistakenly included with the set of patches that introduced the new mtd api entry functions. Or perhaps I am mistaken :) The problem is in the partition wrapper functions, where the calls to the driver methods were replaced with calls to the new mtd api functions. This causes the api function to be called a second time, further down the call stack. This is not only unnecessary and redundant - because the sanity checking code and (more restrictive) bounds checks for the partition were done in the first call - but is potentially problematic and confusing. For example, the call stack for a call to mtd_read() on a partitioned device currently looks like this: mtd_read() gets struct mtd_info for the partition | +-> part_read() via the pointer assigned when the partition was created | +->mtd_read() this time gets struct mtd_info for the master | +->xyz_driver_read() via the pointer asigned by the driver It seems that this can cause a variety of problems. For example, if you want to add code to the api function that tests a value in mtd_info that is relevant only to the partition. Or (in my case) you want the driver to return a value that may be different from that returned by the mtd api function. This patch eliminates the second call to the mtd api function. It was tested on the docg4 nand driver with a subset of the api functions, but I inspected the rest and don't see any problems. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-04 01:13:06 +04:00
retlen, buf);
if (unlikely(mtd_is_eccerr(res)))
mtd->ecc_stats.failed +=
part->parent->ecc_stats.failed - stats.failed;
else
mtd->ecc_stats.corrected +=
part->parent->ecc_stats.corrected - stats.corrected;
return res;
}
static int part_point(struct mtd_info *mtd, loff_t from, size_t len,
size_t *retlen, void **virt, resource_size_t *phys)
{
struct mtd_part *part = mtd_to_part(mtd);
return part->parent->_point(part->parent, from + part->offset, len,
mtd: fix partition wrapper functions This patch reverts a change that may have been mistakenly included with the set of patches that introduced the new mtd api entry functions. Or perhaps I am mistaken :) The problem is in the partition wrapper functions, where the calls to the driver methods were replaced with calls to the new mtd api functions. This causes the api function to be called a second time, further down the call stack. This is not only unnecessary and redundant - because the sanity checking code and (more restrictive) bounds checks for the partition were done in the first call - but is potentially problematic and confusing. For example, the call stack for a call to mtd_read() on a partitioned device currently looks like this: mtd_read() gets struct mtd_info for the partition | +-> part_read() via the pointer assigned when the partition was created | +->mtd_read() this time gets struct mtd_info for the master | +->xyz_driver_read() via the pointer asigned by the driver It seems that this can cause a variety of problems. For example, if you want to add code to the api function that tests a value in mtd_info that is relevant only to the partition. Or (in my case) you want the driver to return a value that may be different from that returned by the mtd api function. This patch eliminates the second call to the mtd api function. It was tested on the docg4 nand driver with a subset of the api functions, but I inspected the rest and don't see any problems. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-04 01:13:06 +04:00
retlen, virt, phys);
}
static int part_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
{
struct mtd_part *part = mtd_to_part(mtd);
return part->parent->_unpoint(part->parent, from + part->offset, len);
}
[MTD] Rework the out of band handling completely Hopefully the last iteration on this! The handling of out of band data on NAND was accompanied by tons of fruitless discussions and halfarsed patches to make it work for a particular problem. Sufficiently annoyed by I all those "I know it better" mails and the resonable amount of discarded "it solves my problem" patches, I finally decided to go for the big rework. After removing the _ecc variants of mtd read/write functions the solution to satisfy the various requirements was to refactor the read/write _oob functions in mtd. The major change is that read/write_oob now takes a pointer to an operation descriptor structure "struct mtd_oob_ops".instead of having a function with at least seven arguments. read/write_oob which should probably renamed to a more descriptive name, can do the following tasks: - read/write out of band data - read/write data content and out of band data - read/write raw data content and out of band data (ecc disabled) struct mtd_oob_ops has a mode field, which determines the oob handling mode. Aside of the MTD_OOB_RAW mode, which is intended to be especially for diagnostic purposes and some internal functions e.g. bad block table creation, the other two modes are for mtd clients: MTD_OOB_PLACE puts/gets the given oob data exactly to/from the place which is described by the ooboffs and ooblen fields of the mtd_oob_ops strcuture. It's up to the caller to make sure that the byte positions are not used by the ECC placement algorithms. MTD_OOB_AUTO puts/gets the given oob data automaticaly to/from the places in the out of band area which are described by the oobfree tuples in the ecclayout data structre which is associated to the devicee. The decision whether data plus oob or oob only handling is done depends on the setting of the datbuf member of the data structure. When datbuf == NULL then the internal read/write_oob functions are selected, otherwise the read/write data routines are invoked. Tested on a few platforms with all variants. Please be aware of possible regressions for your particular device / application scenario Disclaimer: Any whining will be ignored from those who just contributed "hot air blurb" and never sat down to tackle the underlying problem of the mess in the NAND driver grown over time and the big chunk of work to fix up the existing users. The problem was not the holiness of the existing MTD interfaces. The problems was the lack of time to go for the big overhaul. It's easy to add more mess to the existing one, but it takes alot of effort to go for a real solution. Improvements and bugfixes are welcome! Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 05:26:58 +04:00
static int part_read_oob(struct mtd_info *mtd, loff_t from,
struct mtd_oob_ops *ops)
{
struct mtd_part *part = mtd_to_part(mtd);
struct mtd_ecc_stats stats;
int res;
[MTD] Rework the out of band handling completely Hopefully the last iteration on this! The handling of out of band data on NAND was accompanied by tons of fruitless discussions and halfarsed patches to make it work for a particular problem. Sufficiently annoyed by I all those "I know it better" mails and the resonable amount of discarded "it solves my problem" patches, I finally decided to go for the big rework. After removing the _ecc variants of mtd read/write functions the solution to satisfy the various requirements was to refactor the read/write _oob functions in mtd. The major change is that read/write_oob now takes a pointer to an operation descriptor structure "struct mtd_oob_ops".instead of having a function with at least seven arguments. read/write_oob which should probably renamed to a more descriptive name, can do the following tasks: - read/write out of band data - read/write data content and out of band data - read/write raw data content and out of band data (ecc disabled) struct mtd_oob_ops has a mode field, which determines the oob handling mode. Aside of the MTD_OOB_RAW mode, which is intended to be especially for diagnostic purposes and some internal functions e.g. bad block table creation, the other two modes are for mtd clients: MTD_OOB_PLACE puts/gets the given oob data exactly to/from the place which is described by the ooboffs and ooblen fields of the mtd_oob_ops strcuture. It's up to the caller to make sure that the byte positions are not used by the ECC placement algorithms. MTD_OOB_AUTO puts/gets the given oob data automaticaly to/from the places in the out of band area which are described by the oobfree tuples in the ecclayout data structre which is associated to the devicee. The decision whether data plus oob or oob only handling is done depends on the setting of the datbuf member of the data structure. When datbuf == NULL then the internal read/write_oob functions are selected, otherwise the read/write data routines are invoked. Tested on a few platforms with all variants. Please be aware of possible regressions for your particular device / application scenario Disclaimer: Any whining will be ignored from those who just contributed "hot air blurb" and never sat down to tackle the underlying problem of the mess in the NAND driver grown over time and the big chunk of work to fix up the existing users. The problem was not the holiness of the existing MTD interfaces. The problems was the lack of time to go for the big overhaul. It's easy to add more mess to the existing one, but it takes alot of effort to go for a real solution. Improvements and bugfixes are welcome! Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 05:26:58 +04:00
stats = part->parent->ecc_stats;
res = part->parent->_read_oob(part->parent, from + part->offset, ops);
if (unlikely(mtd_is_eccerr(res)))
mtd->ecc_stats.failed +=
part->parent->ecc_stats.failed - stats.failed;
else
mtd->ecc_stats.corrected +=
part->parent->ecc_stats.corrected - stats.corrected;
return res;
}
static int part_read_user_prot_reg(struct mtd_info *mtd, loff_t from,
size_t len, size_t *retlen, u_char *buf)
{
struct mtd_part *part = mtd_to_part(mtd);
return part->parent->_read_user_prot_reg(part->parent, from, len,
mtd: fix partition wrapper functions This patch reverts a change that may have been mistakenly included with the set of patches that introduced the new mtd api entry functions. Or perhaps I am mistaken :) The problem is in the partition wrapper functions, where the calls to the driver methods were replaced with calls to the new mtd api functions. This causes the api function to be called a second time, further down the call stack. This is not only unnecessary and redundant - because the sanity checking code and (more restrictive) bounds checks for the partition were done in the first call - but is potentially problematic and confusing. For example, the call stack for a call to mtd_read() on a partitioned device currently looks like this: mtd_read() gets struct mtd_info for the partition | +-> part_read() via the pointer assigned when the partition was created | +->mtd_read() this time gets struct mtd_info for the master | +->xyz_driver_read() via the pointer asigned by the driver It seems that this can cause a variety of problems. For example, if you want to add code to the api function that tests a value in mtd_info that is relevant only to the partition. Or (in my case) you want the driver to return a value that may be different from that returned by the mtd api function. This patch eliminates the second call to the mtd api function. It was tested on the docg4 nand driver with a subset of the api functions, but I inspected the rest and don't see any problems. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-04 01:13:06 +04:00
retlen, buf);
}
static int part_get_user_prot_info(struct mtd_info *mtd, size_t len,
size_t *retlen, struct otp_info *buf)
{
struct mtd_part *part = mtd_to_part(mtd);
return part->parent->_get_user_prot_info(part->parent, len, retlen,
buf);
}
static int part_read_fact_prot_reg(struct mtd_info *mtd, loff_t from,
size_t len, size_t *retlen, u_char *buf)
{
struct mtd_part *part = mtd_to_part(mtd);
return part->parent->_read_fact_prot_reg(part->parent, from, len,
mtd: fix partition wrapper functions This patch reverts a change that may have been mistakenly included with the set of patches that introduced the new mtd api entry functions. Or perhaps I am mistaken :) The problem is in the partition wrapper functions, where the calls to the driver methods were replaced with calls to the new mtd api functions. This causes the api function to be called a second time, further down the call stack. This is not only unnecessary and redundant - because the sanity checking code and (more restrictive) bounds checks for the partition were done in the first call - but is potentially problematic and confusing. For example, the call stack for a call to mtd_read() on a partitioned device currently looks like this: mtd_read() gets struct mtd_info for the partition | +-> part_read() via the pointer assigned when the partition was created | +->mtd_read() this time gets struct mtd_info for the master | +->xyz_driver_read() via the pointer asigned by the driver It seems that this can cause a variety of problems. For example, if you want to add code to the api function that tests a value in mtd_info that is relevant only to the partition. Or (in my case) you want the driver to return a value that may be different from that returned by the mtd api function. This patch eliminates the second call to the mtd api function. It was tested on the docg4 nand driver with a subset of the api functions, but I inspected the rest and don't see any problems. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-04 01:13:06 +04:00
retlen, buf);
}
static int part_get_fact_prot_info(struct mtd_info *mtd, size_t len,
size_t *retlen, struct otp_info *buf)
{
struct mtd_part *part = mtd_to_part(mtd);
return part->parent->_get_fact_prot_info(part->parent, len, retlen,
buf);
}
static int part_write(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, const u_char *buf)
{
struct mtd_part *part = mtd_to_part(mtd);
return part->parent->_write(part->parent, to + part->offset, len,
mtd: fix partition wrapper functions This patch reverts a change that may have been mistakenly included with the set of patches that introduced the new mtd api entry functions. Or perhaps I am mistaken :) The problem is in the partition wrapper functions, where the calls to the driver methods were replaced with calls to the new mtd api functions. This causes the api function to be called a second time, further down the call stack. This is not only unnecessary and redundant - because the sanity checking code and (more restrictive) bounds checks for the partition were done in the first call - but is potentially problematic and confusing. For example, the call stack for a call to mtd_read() on a partitioned device currently looks like this: mtd_read() gets struct mtd_info for the partition | +-> part_read() via the pointer assigned when the partition was created | +->mtd_read() this time gets struct mtd_info for the master | +->xyz_driver_read() via the pointer asigned by the driver It seems that this can cause a variety of problems. For example, if you want to add code to the api function that tests a value in mtd_info that is relevant only to the partition. Or (in my case) you want the driver to return a value that may be different from that returned by the mtd api function. This patch eliminates the second call to the mtd api function. It was tested on the docg4 nand driver with a subset of the api functions, but I inspected the rest and don't see any problems. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-04 01:13:06 +04:00
retlen, buf);
}
static int part_panic_write(struct mtd_info *mtd, loff_t to, size_t len,
size_t *retlen, const u_char *buf)
{
struct mtd_part *part = mtd_to_part(mtd);
return part->parent->_panic_write(part->parent, to + part->offset, len,
mtd: fix partition wrapper functions This patch reverts a change that may have been mistakenly included with the set of patches that introduced the new mtd api entry functions. Or perhaps I am mistaken :) The problem is in the partition wrapper functions, where the calls to the driver methods were replaced with calls to the new mtd api functions. This causes the api function to be called a second time, further down the call stack. This is not only unnecessary and redundant - because the sanity checking code and (more restrictive) bounds checks for the partition were done in the first call - but is potentially problematic and confusing. For example, the call stack for a call to mtd_read() on a partitioned device currently looks like this: mtd_read() gets struct mtd_info for the partition | +-> part_read() via the pointer assigned when the partition was created | +->mtd_read() this time gets struct mtd_info for the master | +->xyz_driver_read() via the pointer asigned by the driver It seems that this can cause a variety of problems. For example, if you want to add code to the api function that tests a value in mtd_info that is relevant only to the partition. Or (in my case) you want the driver to return a value that may be different from that returned by the mtd api function. This patch eliminates the second call to the mtd api function. It was tested on the docg4 nand driver with a subset of the api functions, but I inspected the rest and don't see any problems. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-04 01:13:06 +04:00
retlen, buf);
}
[MTD] Rework the out of band handling completely Hopefully the last iteration on this! The handling of out of band data on NAND was accompanied by tons of fruitless discussions and halfarsed patches to make it work for a particular problem. Sufficiently annoyed by I all those "I know it better" mails and the resonable amount of discarded "it solves my problem" patches, I finally decided to go for the big rework. After removing the _ecc variants of mtd read/write functions the solution to satisfy the various requirements was to refactor the read/write _oob functions in mtd. The major change is that read/write_oob now takes a pointer to an operation descriptor structure "struct mtd_oob_ops".instead of having a function with at least seven arguments. read/write_oob which should probably renamed to a more descriptive name, can do the following tasks: - read/write out of band data - read/write data content and out of band data - read/write raw data content and out of band data (ecc disabled) struct mtd_oob_ops has a mode field, which determines the oob handling mode. Aside of the MTD_OOB_RAW mode, which is intended to be especially for diagnostic purposes and some internal functions e.g. bad block table creation, the other two modes are for mtd clients: MTD_OOB_PLACE puts/gets the given oob data exactly to/from the place which is described by the ooboffs and ooblen fields of the mtd_oob_ops strcuture. It's up to the caller to make sure that the byte positions are not used by the ECC placement algorithms. MTD_OOB_AUTO puts/gets the given oob data automaticaly to/from the places in the out of band area which are described by the oobfree tuples in the ecclayout data structre which is associated to the devicee. The decision whether data plus oob or oob only handling is done depends on the setting of the datbuf member of the data structure. When datbuf == NULL then the internal read/write_oob functions are selected, otherwise the read/write data routines are invoked. Tested on a few platforms with all variants. Please be aware of possible regressions for your particular device / application scenario Disclaimer: Any whining will be ignored from those who just contributed "hot air blurb" and never sat down to tackle the underlying problem of the mess in the NAND driver grown over time and the big chunk of work to fix up the existing users. The problem was not the holiness of the existing MTD interfaces. The problems was the lack of time to go for the big overhaul. It's easy to add more mess to the existing one, but it takes alot of effort to go for a real solution. Improvements and bugfixes are welcome! Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 05:26:58 +04:00
static int part_write_oob(struct mtd_info *mtd, loff_t to,
struct mtd_oob_ops *ops)
{
struct mtd_part *part = mtd_to_part(mtd);
[MTD] Rework the out of band handling completely Hopefully the last iteration on this! The handling of out of band data on NAND was accompanied by tons of fruitless discussions and halfarsed patches to make it work for a particular problem. Sufficiently annoyed by I all those "I know it better" mails and the resonable amount of discarded "it solves my problem" patches, I finally decided to go for the big rework. After removing the _ecc variants of mtd read/write functions the solution to satisfy the various requirements was to refactor the read/write _oob functions in mtd. The major change is that read/write_oob now takes a pointer to an operation descriptor structure "struct mtd_oob_ops".instead of having a function with at least seven arguments. read/write_oob which should probably renamed to a more descriptive name, can do the following tasks: - read/write out of band data - read/write data content and out of band data - read/write raw data content and out of band data (ecc disabled) struct mtd_oob_ops has a mode field, which determines the oob handling mode. Aside of the MTD_OOB_RAW mode, which is intended to be especially for diagnostic purposes and some internal functions e.g. bad block table creation, the other two modes are for mtd clients: MTD_OOB_PLACE puts/gets the given oob data exactly to/from the place which is described by the ooboffs and ooblen fields of the mtd_oob_ops strcuture. It's up to the caller to make sure that the byte positions are not used by the ECC placement algorithms. MTD_OOB_AUTO puts/gets the given oob data automaticaly to/from the places in the out of band area which are described by the oobfree tuples in the ecclayout data structre which is associated to the devicee. The decision whether data plus oob or oob only handling is done depends on the setting of the datbuf member of the data structure. When datbuf == NULL then the internal read/write_oob functions are selected, otherwise the read/write data routines are invoked. Tested on a few platforms with all variants. Please be aware of possible regressions for your particular device / application scenario Disclaimer: Any whining will be ignored from those who just contributed "hot air blurb" and never sat down to tackle the underlying problem of the mess in the NAND driver grown over time and the big chunk of work to fix up the existing users. The problem was not the holiness of the existing MTD interfaces. The problems was the lack of time to go for the big overhaul. It's easy to add more mess to the existing one, but it takes alot of effort to go for a real solution. Improvements and bugfixes are welcome! Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2006-05-29 05:26:58 +04:00
return part->parent->_write_oob(part->parent, to + part->offset, ops);
}
static int part_write_user_prot_reg(struct mtd_info *mtd, loff_t from,
size_t len, size_t *retlen, u_char *buf)
{
struct mtd_part *part = mtd_to_part(mtd);
return part->parent->_write_user_prot_reg(part->parent, from, len,
mtd: fix partition wrapper functions This patch reverts a change that may have been mistakenly included with the set of patches that introduced the new mtd api entry functions. Or perhaps I am mistaken :) The problem is in the partition wrapper functions, where the calls to the driver methods were replaced with calls to the new mtd api functions. This causes the api function to be called a second time, further down the call stack. This is not only unnecessary and redundant - because the sanity checking code and (more restrictive) bounds checks for the partition were done in the first call - but is potentially problematic and confusing. For example, the call stack for a call to mtd_read() on a partitioned device currently looks like this: mtd_read() gets struct mtd_info for the partition | +-> part_read() via the pointer assigned when the partition was created | +->mtd_read() this time gets struct mtd_info for the master | +->xyz_driver_read() via the pointer asigned by the driver It seems that this can cause a variety of problems. For example, if you want to add code to the api function that tests a value in mtd_info that is relevant only to the partition. Or (in my case) you want the driver to return a value that may be different from that returned by the mtd api function. This patch eliminates the second call to the mtd api function. It was tested on the docg4 nand driver with a subset of the api functions, but I inspected the rest and don't see any problems. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-04 01:13:06 +04:00
retlen, buf);
}
static int part_lock_user_prot_reg(struct mtd_info *mtd, loff_t from,
size_t len)
{
struct mtd_part *part = mtd_to_part(mtd);
return part->parent->_lock_user_prot_reg(part->parent, from, len);
}
static int part_writev(struct mtd_info *mtd, const struct kvec *vecs,
unsigned long count, loff_t to, size_t *retlen)
{
struct mtd_part *part = mtd_to_part(mtd);
return part->parent->_writev(part->parent, vecs, count,
mtd: fix partition wrapper functions This patch reverts a change that may have been mistakenly included with the set of patches that introduced the new mtd api entry functions. Or perhaps I am mistaken :) The problem is in the partition wrapper functions, where the calls to the driver methods were replaced with calls to the new mtd api functions. This causes the api function to be called a second time, further down the call stack. This is not only unnecessary and redundant - because the sanity checking code and (more restrictive) bounds checks for the partition were done in the first call - but is potentially problematic and confusing. For example, the call stack for a call to mtd_read() on a partitioned device currently looks like this: mtd_read() gets struct mtd_info for the partition | +-> part_read() via the pointer assigned when the partition was created | +->mtd_read() this time gets struct mtd_info for the master | +->xyz_driver_read() via the pointer asigned by the driver It seems that this can cause a variety of problems. For example, if you want to add code to the api function that tests a value in mtd_info that is relevant only to the partition. Or (in my case) you want the driver to return a value that may be different from that returned by the mtd api function. This patch eliminates the second call to the mtd api function. It was tested on the docg4 nand driver with a subset of the api functions, but I inspected the rest and don't see any problems. Signed-off-by: Mike Dunn <mikedunn@newsguy.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-04 01:13:06 +04:00
to + part->offset, retlen);
}
static int part_erase(struct mtd_info *mtd, struct erase_info *instr)
{
struct mtd_part *part = mtd_to_part(mtd);
int ret;
instr->addr += part->offset;
ret = part->parent->_erase(part->parent, instr);
if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
instr->fail_addr -= part->offset;
instr->addr -= part->offset;
return ret;
}
static int part_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
{
struct mtd_part *part = mtd_to_part(mtd);
return part->parent->_lock(part->parent, ofs + part->offset, len);
}
static int part_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
{
struct mtd_part *part = mtd_to_part(mtd);
return part->parent->_unlock(part->parent, ofs + part->offset, len);
}
static int part_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
{
struct mtd_part *part = mtd_to_part(mtd);
return part->parent->_is_locked(part->parent, ofs + part->offset, len);
}
static void part_sync(struct mtd_info *mtd)
{
struct mtd_part *part = mtd_to_part(mtd);
part->parent->_sync(part->parent);
}
static int part_suspend(struct mtd_info *mtd)
{
struct mtd_part *part = mtd_to_part(mtd);
return part->parent->_suspend(part->parent);
}
static void part_resume(struct mtd_info *mtd)
{
struct mtd_part *part = mtd_to_part(mtd);
part->parent->_resume(part->parent);
}
static int part_block_isreserved(struct mtd_info *mtd, loff_t ofs)
{
struct mtd_part *part = mtd_to_part(mtd);
ofs += part->offset;
return part->parent->_block_isreserved(part->parent, ofs);
}
static int part_block_isbad(struct mtd_info *mtd, loff_t ofs)
{
struct mtd_part *part = mtd_to_part(mtd);
ofs += part->offset;
return part->parent->_block_isbad(part->parent, ofs);
}
static int part_block_markbad(struct mtd_info *mtd, loff_t ofs)
{
struct mtd_part *part = mtd_to_part(mtd);
int res;
ofs += part->offset;
res = part->parent->_block_markbad(part->parent, ofs);
if (!res)
mtd->ecc_stats.badblocks++;
return res;
}
static int part_get_device(struct mtd_info *mtd)
{
struct mtd_part *part = mtd_to_part(mtd);
return part->parent->_get_device(part->parent);
}
static void part_put_device(struct mtd_info *mtd)
{
struct mtd_part *part = mtd_to_part(mtd);
part->parent->_put_device(part->parent);
}
static int part_ooblayout_ecc(struct mtd_info *mtd, int section,
struct mtd_oob_region *oobregion)
{
struct mtd_part *part = mtd_to_part(mtd);
return mtd_ooblayout_ecc(part->parent, section, oobregion);
}
static int part_ooblayout_free(struct mtd_info *mtd, int section,
struct mtd_oob_region *oobregion)
{
struct mtd_part *part = mtd_to_part(mtd);
return mtd_ooblayout_free(part->parent, section, oobregion);
}
static const struct mtd_ooblayout_ops part_ooblayout_ops = {
.ecc = part_ooblayout_ecc,
.free = part_ooblayout_free,
};
static int part_max_bad_blocks(struct mtd_info *mtd, loff_t ofs, size_t len)
{
struct mtd_part *part = mtd_to_part(mtd);
return part->parent->_max_bad_blocks(part->parent,
ofs + part->offset, len);
}
static inline void free_partition(struct mtd_part *p)
{
kfree(p->mtd.name);
kfree(p);
}
/**
* mtd_parse_part - parse MTD partition looking for subpartitions
*
* @slave: part that is supposed to be a container and should be parsed
* @types: NULL-terminated array with names of partition parsers to try
*
* Some partitions are kind of containers with extra subpartitions (volumes).
* There can be various formats of such containers. This function tries to use
* specified parsers to analyze given partition and registers found
* subpartitions on success.
*/
static int mtd_parse_part(struct mtd_part *slave, const char *const *types)
{
return parse_mtd_partitions(&slave->mtd, types, NULL);
}
static struct mtd_part *allocate_partition(struct mtd_info *parent,
const struct mtd_partition *part, int partno,
uint64_t cur_offset)
{
int wr_alignment = (parent->flags & MTD_NO_ERASE) ? parent->writesize :
parent->erasesize;
struct mtd_part *slave;
u32 remainder;
char *name;
u64 tmp;
/* allocate the partition structure */
slave = kzalloc(sizeof(*slave), GFP_KERNEL);
name = kstrdup(part->name, GFP_KERNEL);
if (!name || !slave) {
printk(KERN_ERR"memory allocation error while creating partitions for \"%s\"\n",
parent->name);
kfree(name);
kfree(slave);
return ERR_PTR(-ENOMEM);
}
/* set up the MTD object for this partition */
slave->mtd.type = parent->type;
slave->mtd.flags = parent->flags & ~part->mask_flags;
slave->mtd.size = part->size;
slave->mtd.writesize = parent->writesize;
slave->mtd.writebufsize = parent->writebufsize;
slave->mtd.oobsize = parent->oobsize;
slave->mtd.oobavail = parent->oobavail;
slave->mtd.subpage_sft = parent->subpage_sft;
slave->mtd.pairing = parent->pairing;
slave->mtd.name = name;
slave->mtd.owner = parent->owner;
/* NOTE: Historically, we didn't arrange MTDs as a tree out of
* concern for showing the same data in multiple partitions.
* However, it is very useful to have the master node present,
* so the MTD_PARTITIONED_MASTER option allows that. The master
* will have device nodes etc only if this is set, so make the
* parent conditional on that option. Note, this is a way to
* distinguish between the master and the partition in sysfs.
*/
slave->mtd.dev.parent = IS_ENABLED(CONFIG_MTD_PARTITIONED_MASTER) || mtd_is_partition(parent) ?
&parent->dev :
parent->dev.parent;
slave->mtd.dev.of_node = part->of_node;
if (parent->_read)
slave->mtd._read = part_read;
if (parent->_write)
slave->mtd._write = part_write;
if (parent->_panic_write)
slave->mtd._panic_write = part_panic_write;
if (parent->_point && parent->_unpoint) {
slave->mtd._point = part_point;
slave->mtd._unpoint = part_unpoint;
}
if (parent->_read_oob)
slave->mtd._read_oob = part_read_oob;
if (parent->_write_oob)
slave->mtd._write_oob = part_write_oob;
if (parent->_read_user_prot_reg)
slave->mtd._read_user_prot_reg = part_read_user_prot_reg;
if (parent->_read_fact_prot_reg)
slave->mtd._read_fact_prot_reg = part_read_fact_prot_reg;
if (parent->_write_user_prot_reg)
slave->mtd._write_user_prot_reg = part_write_user_prot_reg;
if (parent->_lock_user_prot_reg)
slave->mtd._lock_user_prot_reg = part_lock_user_prot_reg;
if (parent->_get_user_prot_info)
slave->mtd._get_user_prot_info = part_get_user_prot_info;
if (parent->_get_fact_prot_info)
slave->mtd._get_fact_prot_info = part_get_fact_prot_info;
if (parent->_sync)
slave->mtd._sync = part_sync;
if (!partno && !parent->dev.class && parent->_suspend &&
parent->_resume) {
slave->mtd._suspend = part_suspend;
slave->mtd._resume = part_resume;
}
if (parent->_writev)
slave->mtd._writev = part_writev;
if (parent->_lock)
slave->mtd._lock = part_lock;
if (parent->_unlock)
slave->mtd._unlock = part_unlock;
if (parent->_is_locked)
slave->mtd._is_locked = part_is_locked;
if (parent->_block_isreserved)
slave->mtd._block_isreserved = part_block_isreserved;
if (parent->_block_isbad)
slave->mtd._block_isbad = part_block_isbad;
if (parent->_block_markbad)
slave->mtd._block_markbad = part_block_markbad;
if (parent->_max_bad_blocks)
slave->mtd._max_bad_blocks = part_max_bad_blocks;
if (parent->_get_device)
slave->mtd._get_device = part_get_device;
if (parent->_put_device)
slave->mtd._put_device = part_put_device;
slave->mtd._erase = part_erase;
slave->parent = parent;
slave->offset = part->offset;
if (slave->offset == MTDPART_OFS_APPEND)
slave->offset = cur_offset;
if (slave->offset == MTDPART_OFS_NXTBLK) {
tmp = cur_offset;
slave->offset = cur_offset;
remainder = do_div(tmp, wr_alignment);
if (remainder) {
slave->offset += wr_alignment - remainder;
printk(KERN_NOTICE "Moving partition %d: "
"0x%012llx -> 0x%012llx\n", partno,
(unsigned long long)cur_offset, (unsigned long long)slave->offset);
}
}
if (slave->offset == MTDPART_OFS_RETAIN) {
slave->offset = cur_offset;
if (parent->size - slave->offset >= slave->mtd.size) {
slave->mtd.size = parent->size - slave->offset
- slave->mtd.size;
} else {
printk(KERN_ERR "mtd partition \"%s\" doesn't have enough space: %#llx < %#llx, disabled\n",
part->name, parent->size - slave->offset,
slave->mtd.size);
/* register to preserve ordering */
goto out_register;
}
}
if (slave->mtd.size == MTDPART_SIZ_FULL)
slave->mtd.size = parent->size - slave->offset;
printk(KERN_NOTICE "0x%012llx-0x%012llx : \"%s\"\n", (unsigned long long)slave->offset,
(unsigned long long)(slave->offset + slave->mtd.size), slave->mtd.name);
/* let's do some sanity checks */
if (slave->offset >= parent->size) {
/* let's register it anyway to preserve ordering */
slave->offset = 0;
slave->mtd.size = 0;
printk(KERN_ERR"mtd: partition \"%s\" is out of reach -- disabled\n",
part->name);
goto out_register;
}
if (slave->offset + slave->mtd.size > parent->size) {
slave->mtd.size = parent->size - slave->offset;
printk(KERN_WARNING"mtd: partition \"%s\" extends beyond the end of device \"%s\" -- size truncated to %#llx\n",
part->name, parent->name, (unsigned long long)slave->mtd.size);
}
if (parent->numeraseregions > 1) {
/* Deal with variable erase size stuff */
int i, max = parent->numeraseregions;
u64 end = slave->offset + slave->mtd.size;
struct mtd_erase_region_info *regions = parent->eraseregions;
/* Find the first erase regions which is part of this
* partition. */
for (i = 0; i < max && regions[i].offset <= slave->offset; i++)
;
/* The loop searched for the region _behind_ the first one */
if (i > 0)
i--;
/* Pick biggest erasesize */
for (; i < max && regions[i].offset < end; i++) {
if (slave->mtd.erasesize < regions[i].erasesize) {
slave->mtd.erasesize = regions[i].erasesize;
}
}
BUG_ON(slave->mtd.erasesize == 0);
} else {
/* Single erase size */
slave->mtd.erasesize = parent->erasesize;
}
/*
* Slave erasesize might differ from the master one if the master
* exposes several regions with different erasesize. Adjust
* wr_alignment accordingly.
*/
if (!(slave->mtd.flags & MTD_NO_ERASE))
wr_alignment = slave->mtd.erasesize;
tmp = slave->offset;
remainder = do_div(tmp, wr_alignment);
if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
/* Doesn't start on a boundary of major erase size */
/* FIXME: Let it be writable if it is on a boundary of
* _minor_ erase size though */
slave->mtd.flags &= ~MTD_WRITEABLE;
printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase/write block boundary -- force read-only\n",
part->name);
}
tmp = slave->mtd.size;
remainder = do_div(tmp, wr_alignment);
if ((slave->mtd.flags & MTD_WRITEABLE) && remainder) {
slave->mtd.flags &= ~MTD_WRITEABLE;
printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase/write block -- force read-only\n",
part->name);
}
mtd_set_ooblayout(&slave->mtd, &part_ooblayout_ops);
slave->mtd.ecc_step_size = parent->ecc_step_size;
slave->mtd.ecc_strength = parent->ecc_strength;
slave->mtd.bitflip_threshold = parent->bitflip_threshold;
if (parent->_block_isbad) {
uint64_t offs = 0;
while (offs < slave->mtd.size) {
if (mtd_block_isreserved(parent, offs + slave->offset))
slave->mtd.ecc_stats.bbtblocks++;
else if (mtd_block_isbad(parent, offs + slave->offset))
slave->mtd.ecc_stats.badblocks++;
offs += slave->mtd.erasesize;
}
}
out_register:
return slave;
}
static ssize_t mtd_partition_offset_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct mtd_info *mtd = dev_get_drvdata(dev);
struct mtd_part *part = mtd_to_part(mtd);
return snprintf(buf, PAGE_SIZE, "%lld\n", part->offset);
}
static DEVICE_ATTR(offset, S_IRUGO, mtd_partition_offset_show, NULL);
static const struct attribute *mtd_partition_attrs[] = {
&dev_attr_offset.attr,
NULL
};
static int mtd_add_partition_attrs(struct mtd_part *new)
{
int ret = sysfs_create_files(&new->mtd.dev.kobj, mtd_partition_attrs);
if (ret)
printk(KERN_WARNING
"mtd: failed to create partition attrs, err=%d\n", ret);
return ret;
}
int mtd_add_partition(struct mtd_info *parent, const char *name,
long long offset, long long length)
{
struct mtd_partition part;
struct mtd_part *new;
int ret = 0;
/* the direct offset is expected */
if (offset == MTDPART_OFS_APPEND ||
offset == MTDPART_OFS_NXTBLK)
return -EINVAL;
if (length == MTDPART_SIZ_FULL)
length = parent->size - offset;
if (length <= 0)
return -EINVAL;
memset(&part, 0, sizeof(part));
part.name = name;
part.size = length;
part.offset = offset;
new = allocate_partition(parent, &part, -1, offset);
if (IS_ERR(new))
return PTR_ERR(new);
mutex_lock(&mtd_partitions_mutex);
list_add(&new->list, &mtd_partitions);
mutex_unlock(&mtd_partitions_mutex);
add_mtd_device(&new->mtd);
mtd_add_partition_attrs(new);
return ret;
}
EXPORT_SYMBOL_GPL(mtd_add_partition);
/**
* __mtd_del_partition - delete MTD partition
*
* @priv: internal MTD struct for partition to be deleted
*
* This function must be called with the partitions mutex locked.
*/
static int __mtd_del_partition(struct mtd_part *priv)
{
struct mtd_part *child, *next;
int err;
list_for_each_entry_safe(child, next, &mtd_partitions, list) {
if (child->parent == &priv->mtd) {
err = __mtd_del_partition(child);
if (err)
return err;
}
}
sysfs_remove_files(&priv->mtd.dev.kobj, mtd_partition_attrs);
err = del_mtd_device(&priv->mtd);
if (err)
return err;
list_del(&priv->list);
free_partition(priv);
return 0;
}
/*
* This function unregisters and destroy all slave MTD objects which are
* attached to the given MTD object.
*/
int del_mtd_partitions(struct mtd_info *mtd)
{
struct mtd_part *slave, *next;
int ret, err = 0;
mutex_lock(&mtd_partitions_mutex);
list_for_each_entry_safe(slave, next, &mtd_partitions, list)
if (slave->parent == mtd) {
ret = __mtd_del_partition(slave);
if (ret < 0)
err = ret;
}
mutex_unlock(&mtd_partitions_mutex);
return err;
}
int mtd_del_partition(struct mtd_info *mtd, int partno)
{
struct mtd_part *slave, *next;
int ret = -EINVAL;
mutex_lock(&mtd_partitions_mutex);
list_for_each_entry_safe(slave, next, &mtd_partitions, list)
if ((slave->parent == mtd) &&
(slave->mtd.index == partno)) {
ret = __mtd_del_partition(slave);
break;
}
mutex_unlock(&mtd_partitions_mutex);
return ret;
}
EXPORT_SYMBOL_GPL(mtd_del_partition);
/*
* This function, given a master MTD object and a partition table, creates
* and registers slave MTD objects which are bound to the master according to
* the partition definitions.
*
* For historical reasons, this function's caller only registers the master
* if the MTD_PARTITIONED_MASTER config option is set.
*/
int add_mtd_partitions(struct mtd_info *master,
const struct mtd_partition *parts,
int nbparts)
{
struct mtd_part *slave;
uint64_t cur_offset = 0;
int i;
printk(KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
for (i = 0; i < nbparts; i++) {
slave = allocate_partition(master, parts + i, i, cur_offset);
if (IS_ERR(slave)) {
del_mtd_partitions(master);
return PTR_ERR(slave);
}
mutex_lock(&mtd_partitions_mutex);
list_add(&slave->list, &mtd_partitions);
mutex_unlock(&mtd_partitions_mutex);
add_mtd_device(&slave->mtd);
mtd_add_partition_attrs(slave);
if (parts[i].types)
mtd_parse_part(slave, parts[i].types);
cur_offset = slave->offset + slave->mtd.size;
}
return 0;
}
static DEFINE_SPINLOCK(part_parser_lock);
static LIST_HEAD(part_parsers);
static struct mtd_part_parser *mtd_part_parser_get(const char *name)
{
struct mtd_part_parser *p, *ret = NULL;
spin_lock(&part_parser_lock);
list_for_each_entry(p, &part_parsers, list)
if (!strcmp(p->name, name) && try_module_get(p->owner)) {
ret = p;
break;
}
spin_unlock(&part_parser_lock);
return ret;
}
static inline void mtd_part_parser_put(const struct mtd_part_parser *p)
{
module_put(p->owner);
}
/*
* Many partition parsers just expected the core to kfree() all their data in
* one chunk. Do that by default.
*/
static void mtd_part_parser_cleanup_default(const struct mtd_partition *pparts,
int nr_parts)
{
kfree(pparts);
}
int __register_mtd_parser(struct mtd_part_parser *p, struct module *owner)
{
p->owner = owner;
if (!p->cleanup)
p->cleanup = &mtd_part_parser_cleanup_default;
spin_lock(&part_parser_lock);
list_add(&p->list, &part_parsers);
spin_unlock(&part_parser_lock);
return 0;
}
EXPORT_SYMBOL_GPL(__register_mtd_parser);
void deregister_mtd_parser(struct mtd_part_parser *p)
{
spin_lock(&part_parser_lock);
list_del(&p->list);
spin_unlock(&part_parser_lock);
}
EXPORT_SYMBOL_GPL(deregister_mtd_parser);
/*
* Do not forget to update 'parse_mtd_partitions()' kerneldoc comment if you
* are changing this array!
*/
static const char * const default_mtd_part_types[] = {
"cmdlinepart",
"ofpart",
NULL
};
static int mtd_part_do_parse(struct mtd_part_parser *parser,
struct mtd_info *master,
struct mtd_partitions *pparts,
struct mtd_part_parser_data *data)
{
int ret;
ret = (*parser->parse_fn)(master, &pparts->parts, data);
pr_debug("%s: parser %s: %i\n", master->name, parser->name, ret);
if (ret <= 0)
return ret;
pr_notice("%d %s partitions found on MTD device %s\n", ret,
parser->name, master->name);
pparts->nr_parts = ret;
pparts->parser = parser;
return ret;
}
mtd: partitions: add of_match_table parser matching for the "ofpart" type In order to properly support compatibility strings as described in the bindings/mtd/partition.txt "ofpart" type should be treated as an indication for looking into OF. MTD should check "compatible" property and search for a matching parser rather than blindly trying the one supporting "fixed-partitions". It also means that existing "fixed-partitions" parser should get renamed to use a more meaningful name. This commit achievies that aim by introducing a new mtd_part_of_parse(). It works by looking for a matching parser for every string in the "compatibility" property (starting with the most specific one). Please note that driver-specified parsers still take a precedence. It's assumed that driver providing a parser type has a good reason for that (e.g. having platform data with device-specific info). Also doing otherwise could break existing setups. The same applies to using default parsers (including "cmdlinepart") as some overwrite DT data with cmdline argument. Partition parsers can now provide an of_match_table to enable flash<-->parser matching via device tree as documented in the mtd/partition.txt. This support is currently limited to built-in parsers as it uses request_module() and friends. This should be sufficient for most cases though as compiling parsers as modules isn't a common choice. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Tested-by: Peter Rosin <peda@axentia.se> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-14 15:10:42 +03:00
/**
* mtd_part_get_compatible_parser - find MTD parser by a compatible string
*
* @compat: compatible string describing partitions in a device tree
*
* MTD parsers can specify supported partitions by providing a table of
* compatibility strings. This function finds a parser that advertises support
* for a passed value of "compatible".
*/
static struct mtd_part_parser *mtd_part_get_compatible_parser(const char *compat)
{
struct mtd_part_parser *p, *ret = NULL;
spin_lock(&part_parser_lock);
list_for_each_entry(p, &part_parsers, list) {
const struct of_device_id *matches;
matches = p->of_match_table;
if (!matches)
continue;
for (; matches->compatible[0]; matches++) {
if (!strcmp(matches->compatible, compat) &&
try_module_get(p->owner)) {
ret = p;
break;
}
}
if (ret)
break;
}
spin_unlock(&part_parser_lock);
return ret;
}
static int mtd_part_of_parse(struct mtd_info *master,
struct mtd_partitions *pparts)
{
struct mtd_part_parser *parser;
struct device_node *np;
struct property *prop;
const char *compat;
const char *fixed = "fixed-partitions";
mtd: partitions: add of_match_table parser matching for the "ofpart" type In order to properly support compatibility strings as described in the bindings/mtd/partition.txt "ofpart" type should be treated as an indication for looking into OF. MTD should check "compatible" property and search for a matching parser rather than blindly trying the one supporting "fixed-partitions". It also means that existing "fixed-partitions" parser should get renamed to use a more meaningful name. This commit achievies that aim by introducing a new mtd_part_of_parse(). It works by looking for a matching parser for every string in the "compatibility" property (starting with the most specific one). Please note that driver-specified parsers still take a precedence. It's assumed that driver providing a parser type has a good reason for that (e.g. having platform data with device-specific info). Also doing otherwise could break existing setups. The same applies to using default parsers (including "cmdlinepart") as some overwrite DT data with cmdline argument. Partition parsers can now provide an of_match_table to enable flash<-->parser matching via device tree as documented in the mtd/partition.txt. This support is currently limited to built-in parsers as it uses request_module() and friends. This should be sufficient for most cases though as compiling parsers as modules isn't a common choice. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Tested-by: Peter Rosin <peda@axentia.se> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-14 15:10:42 +03:00
int ret, err = 0;
np = of_get_child_by_name(mtd_get_of_node(master), "partitions");
of_property_for_each_string(np, "compatible", prop, compat) {
parser = mtd_part_get_compatible_parser(compat);
if (!parser)
continue;
ret = mtd_part_do_parse(parser, master, pparts, NULL);
if (ret > 0) {
of_node_put(np);
return ret;
}
mtd_part_parser_put(parser);
if (ret < 0 && !err)
err = ret;
}
of_node_put(np);
/*
* For backward compatibility we have to try the "fixed-partitions"
mtd: partitions: add of_match_table parser matching for the "ofpart" type In order to properly support compatibility strings as described in the bindings/mtd/partition.txt "ofpart" type should be treated as an indication for looking into OF. MTD should check "compatible" property and search for a matching parser rather than blindly trying the one supporting "fixed-partitions". It also means that existing "fixed-partitions" parser should get renamed to use a more meaningful name. This commit achievies that aim by introducing a new mtd_part_of_parse(). It works by looking for a matching parser for every string in the "compatibility" property (starting with the most specific one). Please note that driver-specified parsers still take a precedence. It's assumed that driver providing a parser type has a good reason for that (e.g. having platform data with device-specific info). Also doing otherwise could break existing setups. The same applies to using default parsers (including "cmdlinepart") as some overwrite DT data with cmdline argument. Partition parsers can now provide an of_match_table to enable flash<-->parser matching via device tree as documented in the mtd/partition.txt. This support is currently limited to built-in parsers as it uses request_module() and friends. This should be sufficient for most cases though as compiling parsers as modules isn't a common choice. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Tested-by: Peter Rosin <peda@axentia.se> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-14 15:10:42 +03:00
* parser. It supports old DT format with partitions specified as a
* direct subnodes of a flash device DT node without any compatibility
* specified we could match.
*/
parser = mtd_part_parser_get(fixed);
if (!parser && !request_module("%s", fixed))
parser = mtd_part_parser_get(fixed);
if (parser) {
ret = mtd_part_do_parse(parser, master, pparts, NULL);
if (ret > 0)
return ret;
mtd_part_parser_put(parser);
if (ret < 0 && !err)
err = ret;
}
return err;
}
/**
* parse_mtd_partitions - parse and register MTD partitions
*
* @master: the master partition (describes whole MTD device)
* @types: names of partition parsers to try or %NULL
* @data: MTD partition parser-specific data
*
* This function tries to find & register partitions on MTD device @master. It
* uses MTD partition parsers, specified in @types. However, if @types is %NULL,
* then the default list of parsers is used. The default list contains only the
* "cmdlinepart" and "ofpart" parsers ATM.
* Note: If there are more then one parser in @types, the kernel only takes the
* partitions parsed out by the first parser.
*
* This function may return:
* o a negative error code in case of failure
* o number of found partitions otherwise
*/
int parse_mtd_partitions(struct mtd_info *master, const char *const *types,
struct mtd_part_parser_data *data)
{
struct mtd_partitions pparts = { };
struct mtd_part_parser *parser;
int ret, err = 0;
if (!types)
types = default_mtd_part_types;
for ( ; *types; types++) {
mtd: partitions: add of_match_table parser matching for the "ofpart" type In order to properly support compatibility strings as described in the bindings/mtd/partition.txt "ofpart" type should be treated as an indication for looking into OF. MTD should check "compatible" property and search for a matching parser rather than blindly trying the one supporting "fixed-partitions". It also means that existing "fixed-partitions" parser should get renamed to use a more meaningful name. This commit achievies that aim by introducing a new mtd_part_of_parse(). It works by looking for a matching parser for every string in the "compatibility" property (starting with the most specific one). Please note that driver-specified parsers still take a precedence. It's assumed that driver providing a parser type has a good reason for that (e.g. having platform data with device-specific info). Also doing otherwise could break existing setups. The same applies to using default parsers (including "cmdlinepart") as some overwrite DT data with cmdline argument. Partition parsers can now provide an of_match_table to enable flash<-->parser matching via device tree as documented in the mtd/partition.txt. This support is currently limited to built-in parsers as it uses request_module() and friends. This should be sufficient for most cases though as compiling parsers as modules isn't a common choice. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Tested-by: Peter Rosin <peda@axentia.se> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-14 15:10:42 +03:00
/*
* ofpart is a special type that means OF partitioning info
* should be used. It requires a bit different logic so it is
* handled in a separated function.
*/
if (!strcmp(*types, "ofpart")) {
ret = mtd_part_of_parse(master, &pparts);
mtd: partitions: add of_match_table parser matching for the "ofpart" type In order to properly support compatibility strings as described in the bindings/mtd/partition.txt "ofpart" type should be treated as an indication for looking into OF. MTD should check "compatible" property and search for a matching parser rather than blindly trying the one supporting "fixed-partitions". It also means that existing "fixed-partitions" parser should get renamed to use a more meaningful name. This commit achievies that aim by introducing a new mtd_part_of_parse(). It works by looking for a matching parser for every string in the "compatibility" property (starting with the most specific one). Please note that driver-specified parsers still take a precedence. It's assumed that driver providing a parser type has a good reason for that (e.g. having platform data with device-specific info). Also doing otherwise could break existing setups. The same applies to using default parsers (including "cmdlinepart") as some overwrite DT data with cmdline argument. Partition parsers can now provide an of_match_table to enable flash<-->parser matching via device tree as documented in the mtd/partition.txt. This support is currently limited to built-in parsers as it uses request_module() and friends. This should be sufficient for most cases though as compiling parsers as modules isn't a common choice. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Tested-by: Peter Rosin <peda@axentia.se> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-14 15:10:42 +03:00
} else {
pr_debug("%s: parsing partitions %s\n", master->name,
*types);
parser = mtd_part_parser_get(*types);
mtd: partitions: add of_match_table parser matching for the "ofpart" type In order to properly support compatibility strings as described in the bindings/mtd/partition.txt "ofpart" type should be treated as an indication for looking into OF. MTD should check "compatible" property and search for a matching parser rather than blindly trying the one supporting "fixed-partitions". It also means that existing "fixed-partitions" parser should get renamed to use a more meaningful name. This commit achievies that aim by introducing a new mtd_part_of_parse(). It works by looking for a matching parser for every string in the "compatibility" property (starting with the most specific one). Please note that driver-specified parsers still take a precedence. It's assumed that driver providing a parser type has a good reason for that (e.g. having platform data with device-specific info). Also doing otherwise could break existing setups. The same applies to using default parsers (including "cmdlinepart") as some overwrite DT data with cmdline argument. Partition parsers can now provide an of_match_table to enable flash<-->parser matching via device tree as documented in the mtd/partition.txt. This support is currently limited to built-in parsers as it uses request_module() and friends. This should be sufficient for most cases though as compiling parsers as modules isn't a common choice. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Tested-by: Peter Rosin <peda@axentia.se> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-14 15:10:42 +03:00
if (!parser && !request_module("%s", *types))
parser = mtd_part_parser_get(*types);
pr_debug("%s: got parser %s\n", master->name,
parser ? parser->name : NULL);
if (!parser)
continue;
ret = mtd_part_do_parse(parser, master, &pparts, data);
mtd: partitions: add of_match_table parser matching for the "ofpart" type In order to properly support compatibility strings as described in the bindings/mtd/partition.txt "ofpart" type should be treated as an indication for looking into OF. MTD should check "compatible" property and search for a matching parser rather than blindly trying the one supporting "fixed-partitions". It also means that existing "fixed-partitions" parser should get renamed to use a more meaningful name. This commit achievies that aim by introducing a new mtd_part_of_parse(). It works by looking for a matching parser for every string in the "compatibility" property (starting with the most specific one). Please note that driver-specified parsers still take a precedence. It's assumed that driver providing a parser type has a good reason for that (e.g. having platform data with device-specific info). Also doing otherwise could break existing setups. The same applies to using default parsers (including "cmdlinepart") as some overwrite DT data with cmdline argument. Partition parsers can now provide an of_match_table to enable flash<-->parser matching via device tree as documented in the mtd/partition.txt. This support is currently limited to built-in parsers as it uses request_module() and friends. This should be sufficient for most cases though as compiling parsers as modules isn't a common choice. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Tested-by: Peter Rosin <peda@axentia.se> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-14 15:10:42 +03:00
if (ret <= 0)
mtd_part_parser_put(parser);
}
/* Found partitions! */
if (ret > 0) {
err = add_mtd_partitions(master, pparts.parts,
pparts.nr_parts);
mtd_part_parser_cleanup(&pparts);
return err ? err : pparts.nr_parts;
}
/*
* Stash the first error we see; only report it if no parser
* succeeds
*/
if (ret < 0 && !err)
err = ret;
}
return err;
}
void mtd_part_parser_cleanup(struct mtd_partitions *parts)
{
const struct mtd_part_parser *parser;
if (!parts)
return;
parser = parts->parser;
if (parser) {
if (parser->cleanup)
parser->cleanup(parts->parts, parts->nr_parts);
mtd_part_parser_put(parser);
}
}
int mtd_is_partition(const struct mtd_info *mtd)
{
struct mtd_part *part;
int ispart = 0;
mutex_lock(&mtd_partitions_mutex);
list_for_each_entry(part, &mtd_partitions, list)
if (&part->mtd == mtd) {
ispart = 1;
break;
}
mutex_unlock(&mtd_partitions_mutex);
return ispart;
}
EXPORT_SYMBOL_GPL(mtd_is_partition);
/* Returns the size of the entire flash chip */
uint64_t mtd_get_device_size(const struct mtd_info *mtd)
{
if (!mtd_is_partition(mtd))
return mtd->size;
return mtd_get_device_size(mtd_to_part(mtd)->parent);
}
EXPORT_SYMBOL_GPL(mtd_get_device_size);