WSL2-Linux-Kernel/arch/arm/boot/dts/sun7i-a20-bananapi.dts

335 строки
7.2 KiB
Plaintext
Исходник Обычный вид История

/*
* Copyright 2014 Hans de Goede <hdegoede@redhat.com>
*
* Hans de Goede <hdegoede@redhat.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "sun7i-a20.dtsi"
#include "sunxi-common-regulators.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
model = "LeMaker Banana Pi";
compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
aliases {
serial0 = &uart0;
serial1 = &uart3;
serial2 = &uart7;
};
chosen {
stdout-path = "serial0:115200n8";
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_con_in: endpoint {
remote-endpoint = <&hdmi_out_con>;
};
};
};
leds {
compatible = "gpio-leds";
green {
label = "bananapi:green:usr";
gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
};
};
reg_gmac_3v3: gmac-3v3 {
compatible = "regulator-fixed";
regulator-name = "gmac-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <100000>;
enable-active-high;
gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
};
};
&ahci {
status = "okay";
};
&codec {
status = "okay";
};
&cpu0 {
cpu-supply = <&reg_dcdc2>;
operating-points = <
/* kHz uV */
960000 1400000
912000 1400000
864000 1350000
720000 1250000
528000 1150000
312000 1100000
144000 1050000
>;
};
&de {
status = "okay";
};
&ehci0 {
status = "okay";
};
&ehci1 {
status = "okay";
};
&gmac {
pinctrl-names = "default";
pinctrl-0 = <&gmac_rgmii_pins>;
phy-handle = <&phy1>;
phy-mode = "rgmii";
phy-supply = <&reg_gmac_3v3>;
status = "okay";
};
&hdmi {
status = "okay";
};
&hdmi_out {
hdmi_out_con: endpoint {
remote-endpoint = <&hdmi_con_in>;
};
};
&i2c0 {
status = "okay";
axp209: pmic@34 {
reg = <0x34>;
interrupt-parent = <&nmi_intc>;
interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
};
};
&i2c2 {
status = "okay";
};
&ir0 {
pinctrl-names = "default";
pinctrl-0 = <&ir0_rx_pin>;
status = "okay";
};
&gmac_mdio {
phy1: ethernet-phy@1 {
reg = <1>;
};
};
&mmc0 {
vmmc-supply = <&reg_vcc3v3>;
bus-width = <4>;
cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
status = "okay";
};
&ohci0 {
status = "okay";
};
&ohci1 {
status = "okay";
};
&otg_sram {
status = "okay";
};
&pio {
vcc-pa-supply = <&reg_vcc3v3>;
vcc-pc-supply = <&reg_vcc3v3>;
vcc-pe-supply = <&reg_vcc3v3>;
vcc-pf-supply = <&reg_vcc3v3>;
vcc-pg-supply = <&reg_vcc3v3>;
gpio-line-names =
/* PA */
"ERXD3", "ERXD2", "ERXD1", "ERXD0", "ETXD3",
"ETXD2", "ETXD1", "ETXD0",
"ERXCK", "ERXERR", "ERXDV", "EMDC", "EMDIO",
"ETXEN", "ETXCK", "ECRS",
"ECOL", "ETXERR", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
/* PB */
"PMU-SCK", "PMU-SDA", "", "", "", "", "", "",
"", "USB0-DRV", "", "", "", "", "", "",
"", "", "", "", "SCL", "SDA", "", "",
"", "", "", "", "", "", "", "",
/* PC */
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
/* PD */
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
/* PE */
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
/* PF */
"SD0-D1", "SD0-D0", "SD0-CLK", "SD0-CMD", "SD0-D3",
"SD0-D2", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
/* PG */
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
"", "", "", "", "", "", "", "",
/* PH */
"TXD0", "RXD0", "IO-1", "PH3", "USB0-IDDET", "PH5", "", "",
"", "", "SD0-DET", "", "", "", "", "",
"", "", "", "", "IO-4", "IO-5", "", "EMAC-PWR-EN",
"LED1", "", "", "", "", "", "", "",
/* PI */
"", "", "", "IO-GCLK", "", "", "", "",
"", "", "SPI-CE0", "SPI-CLK", "SPI-MOSI",
"SPI-MISO", "SPI-CE1", "",
"IO-6", "IO-3", "IO-2", "IO-0", "", "", "", "",
"", "", "", "", "", "", "", "";
};
#include "axp209.dtsi"
&reg_dcdc2 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-cpu";
};
&reg_dcdc3 {
regulator-always-on;
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1400000>;
regulator-name = "vdd-int-dll";
};
&reg_ldo1 {
regulator-name = "vdd-rtc";
};
&reg_ldo2 {
regulator-always-on;
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-name = "avcc";
};
&reg_usb0_vbus {
status = "okay";
};
&reg_usb1_vbus {
status = "okay";
};
&reg_usb2_vbus {
status = "okay";
};
&spi0 {
pinctrl-names = "default";
pinctrl-0 = <&spi0_pi_pins>,
<&spi0_cs0_pi_pin>,
<&spi0_cs1_pi_pin>;
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_pb_pins>;
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_ph_pins>;
status = "okay";
};
&uart7 {
pinctrl-names = "default";
pinctrl-0 = <&uart7_pi_pins>;
status = "okay";
};
&usb_otg {
dr_mode = "otg";
status = "okay";
};
&usb_power_supply {
status = "okay";
};
&usbphy {
usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
usb0_vbus_power-supply = <&usb_power_supply>;
usb0_vbus-supply = <&reg_usb0_vbus>;
usb1_vbus-supply = <&reg_usb1_vbus>;
usb2_vbus-supply = <&reg_usb2_vbus>;
status = "okay";
};