WSL2-Linux-Kernel/fs/gfs2/recovery.c

465 строки
11 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved.
* Copyright (C) 2004-2006 Red Hat, Inc. All rights reserved.
*/
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/completion.h>
#include <linux/buffer_head.h>
#include <linux/gfs2_ondisk.h>
#include <linux/crc32.h>
#include <linux/crc32c.h>
#include <linux/ktime.h>
#include "gfs2.h"
#include "incore.h"
#include "bmap.h"
#include "glock.h"
#include "glops.h"
#include "log.h"
#include "lops.h"
#include "meta_io.h"
#include "recovery.h"
#include "super.h"
#include "util.h"
#include "dir.h"
struct workqueue_struct *gfs_recovery_wq;
int gfs2_replay_read_block(struct gfs2_jdesc *jd, unsigned int blk,
struct buffer_head **bh)
{
struct gfs2_inode *ip = GFS2_I(jd->jd_inode);
struct gfs2_glock *gl = ip->i_gl;
int new = 0;
u64 dblock;
u32 extlen;
int error;
error = gfs2_extent_map(&ip->i_inode, blk, &new, &dblock, &extlen);
if (error)
return error;
if (!dblock) {
gfs2_consist_inode(ip);
return -EIO;
}
*bh = gfs2_meta_ra(gl, dblock, extlen);
return error;
}
int gfs2_revoke_add(struct gfs2_jdesc *jd, u64 blkno, unsigned int where)
{
struct list_head *head = &jd->jd_revoke_list;
struct gfs2_revoke_replay *rr;
int found = 0;
list_for_each_entry(rr, head, rr_list) {
if (rr->rr_blkno == blkno) {
found = 1;
break;
}
}
if (found) {
rr->rr_where = where;
return 0;
}
rr = kmalloc(sizeof(struct gfs2_revoke_replay), GFP_NOFS);
if (!rr)
return -ENOMEM;
rr->rr_blkno = blkno;
rr->rr_where = where;
list_add(&rr->rr_list, head);
return 1;
}
int gfs2_revoke_check(struct gfs2_jdesc *jd, u64 blkno, unsigned int where)
{
struct gfs2_revoke_replay *rr;
int wrap, a, b, revoke;
int found = 0;
list_for_each_entry(rr, &jd->jd_revoke_list, rr_list) {
if (rr->rr_blkno == blkno) {
found = 1;
break;
}
}
if (!found)
return 0;
wrap = (rr->rr_where < jd->jd_replay_tail);
a = (jd->jd_replay_tail < where);
b = (where < rr->rr_where);
revoke = (wrap) ? (a || b) : (a && b);
return revoke;
}
void gfs2_revoke_clean(struct gfs2_jdesc *jd)
{
struct list_head *head = &jd->jd_revoke_list;
struct gfs2_revoke_replay *rr;
while (!list_empty(head)) {
rr = list_entry(head->next, struct gfs2_revoke_replay, rr_list);
list_del(&rr->rr_list);
kfree(rr);
}
}
int __get_log_header(struct gfs2_sbd *sdp, const struct gfs2_log_header *lh,
unsigned int blkno, struct gfs2_log_header_host *head)
{
u32 hash, crc;
if (lh->lh_header.mh_magic != cpu_to_be32(GFS2_MAGIC) ||
lh->lh_header.mh_type != cpu_to_be32(GFS2_METATYPE_LH) ||
(blkno && be32_to_cpu(lh->lh_blkno) != blkno))
return 1;
hash = crc32(~0, lh, LH_V1_SIZE - 4);
hash = ~crc32_le_shift(hash, 4); /* assume lh_hash is zero */
if (be32_to_cpu(lh->lh_hash) != hash)
return 1;
crc = crc32c(~0, (void *)lh + LH_V1_SIZE + 4,
sdp->sd_sb.sb_bsize - LH_V1_SIZE - 4);
if ((lh->lh_crc != 0 && be32_to_cpu(lh->lh_crc) != crc))
return 1;
head->lh_sequence = be64_to_cpu(lh->lh_sequence);
head->lh_flags = be32_to_cpu(lh->lh_flags);
head->lh_tail = be32_to_cpu(lh->lh_tail);
head->lh_blkno = be32_to_cpu(lh->lh_blkno);
return 0;
}
/**
* get_log_header - read the log header for a given segment
* @jd: the journal
* @blk: the block to look at
* @lh: the log header to return
*
* Read the log header for a given segement in a given journal. Do a few
* sanity checks on it.
*
* Returns: 0 on success,
* 1 if the header was invalid or incomplete,
* errno on error
*/
static int get_log_header(struct gfs2_jdesc *jd, unsigned int blk,
struct gfs2_log_header_host *head)
{
struct gfs2_sbd *sdp = GFS2_SB(jd->jd_inode);
struct buffer_head *bh;
int error;
error = gfs2_replay_read_block(jd, blk, &bh);
if (error)
return error;
error = __get_log_header(sdp, (const struct gfs2_log_header *)bh->b_data,
blk, head);
brelse(bh);
return error;
}
/**
* foreach_descriptor - go through the active part of the log
* @jd: the journal
* @start: the first log header in the active region
* @end: the last log header (don't process the contents of this entry))
*
* Call a given function once for every log descriptor in the active
* portion of the log.
*
* Returns: errno
*/
static int foreach_descriptor(struct gfs2_jdesc *jd, u32 start,
unsigned int end, int pass)
{
struct gfs2_sbd *sdp = GFS2_SB(jd->jd_inode);
struct buffer_head *bh;
struct gfs2_log_descriptor *ld;
int error = 0;
u32 length;
__be64 *ptr;
unsigned int offset = sizeof(struct gfs2_log_descriptor);
offset += sizeof(__be64) - 1;
offset &= ~(sizeof(__be64) - 1);
while (start != end) {
error = gfs2_replay_read_block(jd, start, &bh);
if (error)
return error;
if (gfs2_meta_check(sdp, bh)) {
brelse(bh);
return -EIO;
}
ld = (struct gfs2_log_descriptor *)bh->b_data;
length = be32_to_cpu(ld->ld_length);
if (be32_to_cpu(ld->ld_header.mh_type) == GFS2_METATYPE_LH) {
struct gfs2_log_header_host lh;
error = get_log_header(jd, start, &lh);
if (!error) {
gfs2_replay_incr_blk(jd, &start);
brelse(bh);
continue;
}
if (error == 1) {
gfs2_consist_inode(GFS2_I(jd->jd_inode));
error = -EIO;
}
brelse(bh);
return error;
} else if (gfs2_metatype_check(sdp, bh, GFS2_METATYPE_LD)) {
brelse(bh);
return -EIO;
}
ptr = (__be64 *)(bh->b_data + offset);
error = lops_scan_elements(jd, start, ld, ptr, pass);
if (error) {
brelse(bh);
return error;
}
while (length--)
gfs2_replay_incr_blk(jd, &start);
brelse(bh);
}
return 0;
}
/**
* clean_journal - mark a dirty journal as being clean
* @jd: the journal
* @head: the head journal to start from
*
* Returns: errno
*/
static void clean_journal(struct gfs2_jdesc *jd,
struct gfs2_log_header_host *head)
{
struct gfs2_sbd *sdp = GFS2_SB(jd->jd_inode);
u32 lblock = head->lh_blkno;
gfs2_replay_incr_blk(jd, &lblock);
gfs2_write_log_header(sdp, jd, head->lh_sequence + 1, 0, lblock,
GFS2_LOG_HEAD_UNMOUNT | GFS2_LOG_HEAD_RECOVERY,
REQ_PREFLUSH | REQ_FUA | REQ_META | REQ_SYNC);
if (jd->jd_jid == sdp->sd_lockstruct.ls_jid) {
sdp->sd_log_flush_head = lblock;
gfs2_log_incr_head(sdp);
}
}
static void gfs2_recovery_done(struct gfs2_sbd *sdp, unsigned int jid,
unsigned int message)
{
char env_jid[20];
char env_status[20];
char *envp[] = { env_jid, env_status, NULL };
struct lm_lockstruct *ls = &sdp->sd_lockstruct;
ls->ls_recover_jid_done = jid;
ls->ls_recover_jid_status = message;
sprintf(env_jid, "JID=%u", jid);
sprintf(env_status, "RECOVERY=%s",
message == LM_RD_SUCCESS ? "Done" : "Failed");
kobject_uevent_env(&sdp->sd_kobj, KOBJ_CHANGE, envp);
if (sdp->sd_lockstruct.ls_ops->lm_recovery_result)
sdp->sd_lockstruct.ls_ops->lm_recovery_result(sdp, jid, message);
}
void gfs2_recover_func(struct work_struct *work)
{
struct gfs2_jdesc *jd = container_of(work, struct gfs2_jdesc, jd_work);
struct gfs2_inode *ip = GFS2_I(jd->jd_inode);
struct gfs2_sbd *sdp = GFS2_SB(jd->jd_inode);
struct gfs2_log_header_host head;
GFS2: remove transaction glock GFS2 has a transaction glock, which must be grabbed for every transaction, whose purpose is to deal with freezing the filesystem. Aside from this involving a large amount of locking, it is very easy to make the current fsfreeze code hang on unfreezing. This patch rewrites how gfs2 handles freezing the filesystem. The transaction glock is removed. In it's place is a freeze glock, which is cached (but not held) in a shared state by every node in the cluster when the filesystem is mounted. This lock only needs to be grabbed on freezing, and actions which need to be safe from freezing, like recovery. When a node wants to freeze the filesystem, it grabs this glock exclusively. When the freeze glock state changes on the nodes (either from shared to unlocked, or shared to exclusive), the filesystem does a special log flush. gfs2_log_flush() does all the work for flushing out the and shutting down the incore log, and then it tries to grab the freeze glock in a shared state again. Since the filesystem is stuck in gfs2_log_flush, no new transaction can start, and nothing can be written to disk. Unfreezing the filesytem simply involes dropping the freeze glock, allowing gfs2_log_flush() to grab and then release the shared lock, so it is cached for next time. However, in order for the unfreezing ioctl to occur, gfs2 needs to get a shared lock on the filesystem root directory inode to check permissions. If that glock has already been grabbed exclusively, fsfreeze will be unable to get the shared lock and unfreeze the filesystem. In order to allow the unfreeze, this patch makes gfs2 grab a shared lock on the filesystem root directory during the freeze, and hold it until it unfreezes the filesystem. The functions which need to grab a shared lock in order to allow the unfreeze ioctl to be issued now use the lock grabbed by the freeze code instead. The freeze and unfreeze code take care to make sure that this shared lock will not be dropped while another process is using it. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-05-02 07:26:55 +04:00
struct gfs2_holder j_gh, ji_gh, thaw_gh;
ktime_t t_start, t_jlck, t_jhd, t_tlck, t_rep;
int ro = 0;
unsigned int pass;
GFS2: Fix recovery issues for spectators This patch fixes a couple problems dealing with spectators who remain with gfs2 mounts after the last non-spectator node fails. Before this patch, spectator mounts would try to acquire the dlm's mounted lock EX as part of its normal recovery sequence. The mounted lock is only used to determine whether the node is the first mounter, the first node to mount the file system, for the purposes of file system recovery and journal replay. It's not necessary for spectators: they should never do journal recovery. If they acquire the lock it will prevent another "real" first-mounter from acquiring the lock in EX mode, which means it also cannot do journal recovery because it doesn't think it's the first node to mount the file system. This patch checks if the mounter is a spectator, and if so, avoids grabbing the mounted lock. This allows a secondary mounter who is really the first non-spectator mounter, to do journal recovery: since the spectator doesn't acquire the lock, it can grab it in EX mode, and therefore consider itself to be the first mounter both as a "real" first mount, and as a first-real-after-spectator. Note that the control lock still needs to be taken in PR mode in order to fetch the lvb value so it has the current status of all journal's recovery. This is used as it is today by a first mounter to replay the journals. For spectators, it's merely used to fetch the status bits. All recovery is bypassed and the node waits until recovery is completed by a non-spectator node. I also improved the cryptic message given by control_mount when a spectator is waiting for a non-spectator to perform recovery. It also fixes a problem in gfs2_recover_set whereby spectators were never queueing recovery work for their own journal. They cannot do recovery themselves, but they still need to queue the work so they can check the recovery bits and clear the DFL_BLOCK_LOCKS bit once the recovery happens on another node. When the work queue runs on a spectator, it bypasses most of the work so it won't print a bunch of annoying messages. All it will print is a bunch of messages that look like this until recovery completes on the non-spectator node: GFS2: fsid=mycluster:scratch.s: recover generation 3 jid 0 GFS2: fsid=mycluster:scratch.s: recover jid 0 result busy These continue every 1.5 seconds until the recovery is done by the non-spectator, at which time it says: GFS2: fsid=mycluster:scratch.s: recover generation 4 done Then it proceeds with its mount. If the file system is mounted in spectator node and the last remaining non-spectator is fenced, any IO to the file system is blocked by dlm and the spectator waits until recovery is performed by a non-spectator. If a spectator tries to mount the file system before any non-spectators, it blocks and repeatedly gives this kernel message: GFS2: fsid=mycluster:scratch: Recovery is required. Waiting for a non-spectator to mount. GFS2: fsid=mycluster:scratch: Recovery is required. Waiting for a non-spectator to mount. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2018-07-05 22:40:46 +03:00
int error = 0;
int jlocked = 0;
t_start = ktime_get();
GFS2: Fix recovery issues for spectators This patch fixes a couple problems dealing with spectators who remain with gfs2 mounts after the last non-spectator node fails. Before this patch, spectator mounts would try to acquire the dlm's mounted lock EX as part of its normal recovery sequence. The mounted lock is only used to determine whether the node is the first mounter, the first node to mount the file system, for the purposes of file system recovery and journal replay. It's not necessary for spectators: they should never do journal recovery. If they acquire the lock it will prevent another "real" first-mounter from acquiring the lock in EX mode, which means it also cannot do journal recovery because it doesn't think it's the first node to mount the file system. This patch checks if the mounter is a spectator, and if so, avoids grabbing the mounted lock. This allows a secondary mounter who is really the first non-spectator mounter, to do journal recovery: since the spectator doesn't acquire the lock, it can grab it in EX mode, and therefore consider itself to be the first mounter both as a "real" first mount, and as a first-real-after-spectator. Note that the control lock still needs to be taken in PR mode in order to fetch the lvb value so it has the current status of all journal's recovery. This is used as it is today by a first mounter to replay the journals. For spectators, it's merely used to fetch the status bits. All recovery is bypassed and the node waits until recovery is completed by a non-spectator node. I also improved the cryptic message given by control_mount when a spectator is waiting for a non-spectator to perform recovery. It also fixes a problem in gfs2_recover_set whereby spectators were never queueing recovery work for their own journal. They cannot do recovery themselves, but they still need to queue the work so they can check the recovery bits and clear the DFL_BLOCK_LOCKS bit once the recovery happens on another node. When the work queue runs on a spectator, it bypasses most of the work so it won't print a bunch of annoying messages. All it will print is a bunch of messages that look like this until recovery completes on the non-spectator node: GFS2: fsid=mycluster:scratch.s: recover generation 3 jid 0 GFS2: fsid=mycluster:scratch.s: recover jid 0 result busy These continue every 1.5 seconds until the recovery is done by the non-spectator, at which time it says: GFS2: fsid=mycluster:scratch.s: recover generation 4 done Then it proceeds with its mount. If the file system is mounted in spectator node and the last remaining non-spectator is fenced, any IO to the file system is blocked by dlm and the spectator waits until recovery is performed by a non-spectator. If a spectator tries to mount the file system before any non-spectators, it blocks and repeatedly gives this kernel message: GFS2: fsid=mycluster:scratch: Recovery is required. Waiting for a non-spectator to mount. GFS2: fsid=mycluster:scratch: Recovery is required. Waiting for a non-spectator to mount. Signed-off-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
2018-07-05 22:40:46 +03:00
if (sdp->sd_args.ar_spectator)
goto fail;
if (jd->jd_jid != sdp->sd_lockstruct.ls_jid) {
fs_info(sdp, "jid=%u: Trying to acquire journal lock...\n",
jd->jd_jid);
jlocked = 1;
/* Acquire the journal lock so we can do recovery */
error = gfs2_glock_nq_num(sdp, jd->jd_jid, &gfs2_journal_glops,
LM_ST_EXCLUSIVE,
LM_FLAG_NOEXP | LM_FLAG_TRY | GL_NOCACHE,
&j_gh);
switch (error) {
case 0:
break;
case GLR_TRYFAILED:
fs_info(sdp, "jid=%u: Busy\n", jd->jd_jid);
error = 0;
default:
goto fail;
}
error = gfs2_glock_nq_init(ip->i_gl, LM_ST_SHARED,
LM_FLAG_NOEXP | GL_NOCACHE, &ji_gh);
if (error)
goto fail_gunlock_j;
} else {
fs_info(sdp, "jid=%u, already locked for use\n", jd->jd_jid);
}
t_jlck = ktime_get();
fs_info(sdp, "jid=%u: Looking at journal...\n", jd->jd_jid);
error = gfs2_jdesc_check(jd);
if (error)
goto fail_gunlock_ji;
error = gfs2_find_jhead(jd, &head, true);
if (error)
goto fail_gunlock_ji;
t_jhd = ktime_get();
fs_info(sdp, "jid=%u: Journal head lookup took %lldms\n", jd->jd_jid,
ktime_ms_delta(t_jhd, t_jlck));
if (!(head.lh_flags & GFS2_LOG_HEAD_UNMOUNT)) {
fs_info(sdp, "jid=%u: Acquiring the transaction lock...\n",
jd->jd_jid);
GFS2: remove transaction glock GFS2 has a transaction glock, which must be grabbed for every transaction, whose purpose is to deal with freezing the filesystem. Aside from this involving a large amount of locking, it is very easy to make the current fsfreeze code hang on unfreezing. This patch rewrites how gfs2 handles freezing the filesystem. The transaction glock is removed. In it's place is a freeze glock, which is cached (but not held) in a shared state by every node in the cluster when the filesystem is mounted. This lock only needs to be grabbed on freezing, and actions which need to be safe from freezing, like recovery. When a node wants to freeze the filesystem, it grabs this glock exclusively. When the freeze glock state changes on the nodes (either from shared to unlocked, or shared to exclusive), the filesystem does a special log flush. gfs2_log_flush() does all the work for flushing out the and shutting down the incore log, and then it tries to grab the freeze glock in a shared state again. Since the filesystem is stuck in gfs2_log_flush, no new transaction can start, and nothing can be written to disk. Unfreezing the filesytem simply involes dropping the freeze glock, allowing gfs2_log_flush() to grab and then release the shared lock, so it is cached for next time. However, in order for the unfreezing ioctl to occur, gfs2 needs to get a shared lock on the filesystem root directory inode to check permissions. If that glock has already been grabbed exclusively, fsfreeze will be unable to get the shared lock and unfreeze the filesystem. In order to allow the unfreeze, this patch makes gfs2 grab a shared lock on the filesystem root directory during the freeze, and hold it until it unfreezes the filesystem. The functions which need to grab a shared lock in order to allow the unfreeze ioctl to be issued now use the lock grabbed by the freeze code instead. The freeze and unfreeze code take care to make sure that this shared lock will not be dropped while another process is using it. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-05-02 07:26:55 +04:00
/* Acquire a shared hold on the freeze lock */
GFS2: remove transaction glock GFS2 has a transaction glock, which must be grabbed for every transaction, whose purpose is to deal with freezing the filesystem. Aside from this involving a large amount of locking, it is very easy to make the current fsfreeze code hang on unfreezing. This patch rewrites how gfs2 handles freezing the filesystem. The transaction glock is removed. In it's place is a freeze glock, which is cached (but not held) in a shared state by every node in the cluster when the filesystem is mounted. This lock only needs to be grabbed on freezing, and actions which need to be safe from freezing, like recovery. When a node wants to freeze the filesystem, it grabs this glock exclusively. When the freeze glock state changes on the nodes (either from shared to unlocked, or shared to exclusive), the filesystem does a special log flush. gfs2_log_flush() does all the work for flushing out the and shutting down the incore log, and then it tries to grab the freeze glock in a shared state again. Since the filesystem is stuck in gfs2_log_flush, no new transaction can start, and nothing can be written to disk. Unfreezing the filesytem simply involes dropping the freeze glock, allowing gfs2_log_flush() to grab and then release the shared lock, so it is cached for next time. However, in order for the unfreezing ioctl to occur, gfs2 needs to get a shared lock on the filesystem root directory inode to check permissions. If that glock has already been grabbed exclusively, fsfreeze will be unable to get the shared lock and unfreeze the filesystem. In order to allow the unfreeze, this patch makes gfs2 grab a shared lock on the filesystem root directory during the freeze, and hold it until it unfreezes the filesystem. The functions which need to grab a shared lock in order to allow the unfreeze ioctl to be issued now use the lock grabbed by the freeze code instead. The freeze and unfreeze code take care to make sure that this shared lock will not be dropped while another process is using it. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-05-02 07:26:55 +04:00
error = gfs2_glock_nq_init(sdp->sd_freeze_gl, LM_ST_SHARED,
LM_FLAG_NOEXP | LM_FLAG_PRIORITY,
&thaw_gh);
if (error)
goto fail_gunlock_ji;
if (test_bit(SDF_RORECOVERY, &sdp->sd_flags)) {
ro = 1;
} else if (test_bit(SDF_JOURNAL_CHECKED, &sdp->sd_flags)) {
if (!test_bit(SDF_JOURNAL_LIVE, &sdp->sd_flags))
ro = 1;
} else {
if (sb_rdonly(sdp->sd_vfs)) {
/* check if device itself is read-only */
ro = bdev_read_only(sdp->sd_vfs->s_bdev);
if (!ro) {
fs_info(sdp, "recovery required on "
"read-only filesystem.\n");
fs_info(sdp, "write access will be "
"enabled during recovery.\n");
}
}
}
if (ro) {
fs_warn(sdp, "jid=%u: Can't replay: read-only block "
"device\n", jd->jd_jid);
error = -EROFS;
GFS2: remove transaction glock GFS2 has a transaction glock, which must be grabbed for every transaction, whose purpose is to deal with freezing the filesystem. Aside from this involving a large amount of locking, it is very easy to make the current fsfreeze code hang on unfreezing. This patch rewrites how gfs2 handles freezing the filesystem. The transaction glock is removed. In it's place is a freeze glock, which is cached (but not held) in a shared state by every node in the cluster when the filesystem is mounted. This lock only needs to be grabbed on freezing, and actions which need to be safe from freezing, like recovery. When a node wants to freeze the filesystem, it grabs this glock exclusively. When the freeze glock state changes on the nodes (either from shared to unlocked, or shared to exclusive), the filesystem does a special log flush. gfs2_log_flush() does all the work for flushing out the and shutting down the incore log, and then it tries to grab the freeze glock in a shared state again. Since the filesystem is stuck in gfs2_log_flush, no new transaction can start, and nothing can be written to disk. Unfreezing the filesytem simply involes dropping the freeze glock, allowing gfs2_log_flush() to grab and then release the shared lock, so it is cached for next time. However, in order for the unfreezing ioctl to occur, gfs2 needs to get a shared lock on the filesystem root directory inode to check permissions. If that glock has already been grabbed exclusively, fsfreeze will be unable to get the shared lock and unfreeze the filesystem. In order to allow the unfreeze, this patch makes gfs2 grab a shared lock on the filesystem root directory during the freeze, and hold it until it unfreezes the filesystem. The functions which need to grab a shared lock in order to allow the unfreeze ioctl to be issued now use the lock grabbed by the freeze code instead. The freeze and unfreeze code take care to make sure that this shared lock will not be dropped while another process is using it. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-05-02 07:26:55 +04:00
goto fail_gunlock_thaw;
}
t_tlck = ktime_get();
fs_info(sdp, "jid=%u: Replaying journal...0x%x to 0x%x\n",
jd->jd_jid, head.lh_tail, head.lh_blkno);
for (pass = 0; pass < 2; pass++) {
lops_before_scan(jd, &head, pass);
error = foreach_descriptor(jd, head.lh_tail,
head.lh_blkno, pass);
lops_after_scan(jd, error, pass);
if (error)
GFS2: remove transaction glock GFS2 has a transaction glock, which must be grabbed for every transaction, whose purpose is to deal with freezing the filesystem. Aside from this involving a large amount of locking, it is very easy to make the current fsfreeze code hang on unfreezing. This patch rewrites how gfs2 handles freezing the filesystem. The transaction glock is removed. In it's place is a freeze glock, which is cached (but not held) in a shared state by every node in the cluster when the filesystem is mounted. This lock only needs to be grabbed on freezing, and actions which need to be safe from freezing, like recovery. When a node wants to freeze the filesystem, it grabs this glock exclusively. When the freeze glock state changes on the nodes (either from shared to unlocked, or shared to exclusive), the filesystem does a special log flush. gfs2_log_flush() does all the work for flushing out the and shutting down the incore log, and then it tries to grab the freeze glock in a shared state again. Since the filesystem is stuck in gfs2_log_flush, no new transaction can start, and nothing can be written to disk. Unfreezing the filesytem simply involes dropping the freeze glock, allowing gfs2_log_flush() to grab and then release the shared lock, so it is cached for next time. However, in order for the unfreezing ioctl to occur, gfs2 needs to get a shared lock on the filesystem root directory inode to check permissions. If that glock has already been grabbed exclusively, fsfreeze will be unable to get the shared lock and unfreeze the filesystem. In order to allow the unfreeze, this patch makes gfs2 grab a shared lock on the filesystem root directory during the freeze, and hold it until it unfreezes the filesystem. The functions which need to grab a shared lock in order to allow the unfreeze ioctl to be issued now use the lock grabbed by the freeze code instead. The freeze and unfreeze code take care to make sure that this shared lock will not be dropped while another process is using it. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-05-02 07:26:55 +04:00
goto fail_gunlock_thaw;
}
clean_journal(jd, &head);
GFS2: remove transaction glock GFS2 has a transaction glock, which must be grabbed for every transaction, whose purpose is to deal with freezing the filesystem. Aside from this involving a large amount of locking, it is very easy to make the current fsfreeze code hang on unfreezing. This patch rewrites how gfs2 handles freezing the filesystem. The transaction glock is removed. In it's place is a freeze glock, which is cached (but not held) in a shared state by every node in the cluster when the filesystem is mounted. This lock only needs to be grabbed on freezing, and actions which need to be safe from freezing, like recovery. When a node wants to freeze the filesystem, it grabs this glock exclusively. When the freeze glock state changes on the nodes (either from shared to unlocked, or shared to exclusive), the filesystem does a special log flush. gfs2_log_flush() does all the work for flushing out the and shutting down the incore log, and then it tries to grab the freeze glock in a shared state again. Since the filesystem is stuck in gfs2_log_flush, no new transaction can start, and nothing can be written to disk. Unfreezing the filesytem simply involes dropping the freeze glock, allowing gfs2_log_flush() to grab and then release the shared lock, so it is cached for next time. However, in order for the unfreezing ioctl to occur, gfs2 needs to get a shared lock on the filesystem root directory inode to check permissions. If that glock has already been grabbed exclusively, fsfreeze will be unable to get the shared lock and unfreeze the filesystem. In order to allow the unfreeze, this patch makes gfs2 grab a shared lock on the filesystem root directory during the freeze, and hold it until it unfreezes the filesystem. The functions which need to grab a shared lock in order to allow the unfreeze ioctl to be issued now use the lock grabbed by the freeze code instead. The freeze and unfreeze code take care to make sure that this shared lock will not be dropped while another process is using it. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-05-02 07:26:55 +04:00
gfs2_glock_dq_uninit(&thaw_gh);
t_rep = ktime_get();
fs_info(sdp, "jid=%u: Journal replayed in %lldms [jlck:%lldms, "
"jhead:%lldms, tlck:%lldms, replay:%lldms]\n",
jd->jd_jid, ktime_ms_delta(t_rep, t_start),
ktime_ms_delta(t_jlck, t_start),
ktime_ms_delta(t_jhd, t_jlck),
ktime_ms_delta(t_tlck, t_jhd),
ktime_ms_delta(t_rep, t_tlck));
}
gfs2_recovery_done(sdp, jd->jd_jid, LM_RD_SUCCESS);
if (jlocked) {
gfs2_glock_dq_uninit(&ji_gh);
gfs2_glock_dq_uninit(&j_gh);
}
fs_info(sdp, "jid=%u: Done\n", jd->jd_jid);
goto done;
GFS2: remove transaction glock GFS2 has a transaction glock, which must be grabbed for every transaction, whose purpose is to deal with freezing the filesystem. Aside from this involving a large amount of locking, it is very easy to make the current fsfreeze code hang on unfreezing. This patch rewrites how gfs2 handles freezing the filesystem. The transaction glock is removed. In it's place is a freeze glock, which is cached (but not held) in a shared state by every node in the cluster when the filesystem is mounted. This lock only needs to be grabbed on freezing, and actions which need to be safe from freezing, like recovery. When a node wants to freeze the filesystem, it grabs this glock exclusively. When the freeze glock state changes on the nodes (either from shared to unlocked, or shared to exclusive), the filesystem does a special log flush. gfs2_log_flush() does all the work for flushing out the and shutting down the incore log, and then it tries to grab the freeze glock in a shared state again. Since the filesystem is stuck in gfs2_log_flush, no new transaction can start, and nothing can be written to disk. Unfreezing the filesytem simply involes dropping the freeze glock, allowing gfs2_log_flush() to grab and then release the shared lock, so it is cached for next time. However, in order for the unfreezing ioctl to occur, gfs2 needs to get a shared lock on the filesystem root directory inode to check permissions. If that glock has already been grabbed exclusively, fsfreeze will be unable to get the shared lock and unfreeze the filesystem. In order to allow the unfreeze, this patch makes gfs2 grab a shared lock on the filesystem root directory during the freeze, and hold it until it unfreezes the filesystem. The functions which need to grab a shared lock in order to allow the unfreeze ioctl to be issued now use the lock grabbed by the freeze code instead. The freeze and unfreeze code take care to make sure that this shared lock will not be dropped while another process is using it. Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-05-02 07:26:55 +04:00
fail_gunlock_thaw:
gfs2_glock_dq_uninit(&thaw_gh);
fail_gunlock_ji:
if (jlocked) {
gfs2_glock_dq_uninit(&ji_gh);
fail_gunlock_j:
gfs2_glock_dq_uninit(&j_gh);
}
fs_info(sdp, "jid=%u: %s\n", jd->jd_jid, (error) ? "Failed" : "Done");
fail:
jd->jd_recover_error = error;
gfs2_recovery_done(sdp, jd->jd_jid, LM_RD_GAVEUP);
done:
clear_bit(JDF_RECOVERY, &jd->jd_flags);
smp_mb__after_atomic();
wake_up_bit(&jd->jd_flags, JDF_RECOVERY);
}
int gfs2_recover_journal(struct gfs2_jdesc *jd, bool wait)
{
int rv;
if (test_and_set_bit(JDF_RECOVERY, &jd->jd_flags))
return -EBUSY;
/* we have JDF_RECOVERY, queue should always succeed */
rv = queue_work(gfs_recovery_wq, &jd->jd_work);
BUG_ON(!rv);
if (wait)
sched: Remove proliferation of wait_on_bit() action functions The current "wait_on_bit" interface requires an 'action' function to be provided which does the actual waiting. There are over 20 such functions, many of them identical. Most cases can be satisfied by one of just two functions, one which uses io_schedule() and one which just uses schedule(). So: Rename wait_on_bit and wait_on_bit_lock to wait_on_bit_action and wait_on_bit_lock_action to make it explicit that they need an action function. Introduce new wait_on_bit{,_lock} and wait_on_bit{,_lock}_io which are *not* given an action function but implicitly use a standard one. The decision to error-out if a signal is pending is now made based on the 'mode' argument rather than being encoded in the action function. All instances of the old wait_on_bit and wait_on_bit_lock which can use the new version have been changed accordingly and their action functions have been discarded. wait_on_bit{_lock} does not return any specific error code in the event of a signal so the caller must check for non-zero and interpolate their own error code as appropriate. The wait_on_bit() call in __fscache_wait_on_invalidate() was ambiguous as it specified TASK_UNINTERRUPTIBLE but used fscache_wait_bit_interruptible as an action function. David Howells confirms this should be uniformly "uninterruptible" The main remaining user of wait_on_bit{,_lock}_action is NFS which needs to use a freezer-aware schedule() call. A comment in fs/gfs2/glock.c notes that having multiple 'action' functions is useful as they display differently in the 'wchan' field of 'ps'. (and /proc/$PID/wchan). As the new bit_wait{,_io} functions are tagged "__sched", they will not show up at all, but something higher in the stack. So the distinction will still be visible, only with different function names (gds2_glock_wait versus gfs2_glock_dq_wait in the gfs2/glock.c case). Since first version of this patch (against 3.15) two new action functions appeared, on in NFS and one in CIFS. CIFS also now uses an action function that makes the same freezer aware schedule call as NFS. Signed-off-by: NeilBrown <neilb@suse.de> Acked-by: David Howells <dhowells@redhat.com> (fscache, keys) Acked-by: Steven Whitehouse <swhiteho@redhat.com> (gfs2) Acked-by: Peter Zijlstra <peterz@infradead.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steve French <sfrench@samba.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20140707051603.28027.72349.stgit@notabene.brown Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-07 09:16:04 +04:00
wait_on_bit(&jd->jd_flags, JDF_RECOVERY,
TASK_UNINTERRUPTIBLE);
return wait ? jd->jd_recover_error : 0;
}