WSL2-Linux-Kernel/arch/ia64/kernel/esi.c

206 строки
4.5 KiB
C
Исходник Обычный вид История

[IA64] esi-support Add support for making ESI calls [1]. ESI stands for "Extensible SAL specification" and is basically a way for invoking firmware subroutines which are identified by a GUID. I don't know whether ESI is used by vendors other than HP (if you do, please let me know) but as firmware "backdoors" go, this seems one of the cleaner methods, so it seems reasonable to support it, even though I'm not aware of any publicly documented ESI calls. I'd have liked to make the ESI module completely stand-alone, but unfortunately that is not easily (or not at all) possible because in order to make ESI calls in physical mode, a small stub similar to the EFI stub is needed in the kernel proper. I did try to create a stub that would work in user-level, but it quickly got ugly beyond recognition (e.g., the stub had to make assumptions about how the module-loader generated call-stubs work) and I didn't even get it to work (that's probably fixable, but I didn't bother because I concluded it was too ugly anyhow). While it's not terribly elegant to have kernel code which isn't actively used in the kernel proper, I think it might be worth making an exception here for two reasons: the code is trivially small (all that's really needed is esi_stub.S) and by including it in the normal kernel distro, it might encourage other OEMs to also use ESI, which I think would be far better than each inventing their own firmware "backdoor". The code was originally written by Alex. I just massaged and packaged it a bit (and perhaps messed up some things along the way...). Changes since first version of patch that was posted to mailing list: * Export ia64_esi_call and ia64_esi_call_phys() as GPL symbols. * Disallow building esi.c as a module for now. Building as a module would currently lead to an unresolved reference to "sal_lock" on SMP kernels because that symbol doesn't get exported. * Export esi_call_phys() only if ESI is enabled. * Remove internal stuff from esi.h and add a "proc_type" argument to ia64_esi_call() such that serialization-requirements can be expressed (ESI follows SAL here, where procedure calls may have to be serialized, are MP-safe, or MP-safe andr reentrant). [1] h21007.www2.hp.com/dspp/tech/tech_TechDocumentDetailPage_IDX/1,1701,919,00.html Signed-off-by: David Mosberger <David.Mosberger@acm.org> Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-06-21 22:19:22 +04:00
/*
* Extensible SAL Interface (ESI) support routines.
*
* Copyright (C) 2006 Hewlett-Packard Co
* Alex Williamson <alex.williamson@hp.com>
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/string.h>
#include <asm/esi.h>
#include <asm/sal.h>
MODULE_AUTHOR("Alex Williamson <alex.williamson@hp.com>");
MODULE_DESCRIPTION("Extensible SAL Interface (ESI) support");
MODULE_LICENSE("GPL");
#define MODULE_NAME "esi"
#define ESI_TABLE_GUID \
EFI_GUID(0x43EA58DC, 0xCF28, 0x4b06, 0xB3, \
0x91, 0xB7, 0x50, 0x59, 0x34, 0x2B, 0xD4)
enum esi_systab_entry_type {
ESI_DESC_ENTRY_POINT = 0
};
/*
* Entry type: Size:
* 0 48
*/
#define ESI_DESC_SIZE(type) "\060"[(unsigned) (type)]
typedef struct ia64_esi_desc_entry_point {
u8 type;
u8 reserved1[15];
u64 esi_proc;
u64 gp;
efi_guid_t guid;
} ia64_esi_desc_entry_point_t;
struct pdesc {
void *addr;
void *gp;
};
static struct ia64_sal_systab *esi_systab;
static int __init esi_init (void)
{
efi_config_table_t *config_tables;
struct ia64_sal_systab *systab;
unsigned long esi = 0;
char *p;
int i;
config_tables = __va(efi.systab->tables);
for (i = 0; i < (int) efi.systab->nr_tables; ++i) {
if (efi_guidcmp(config_tables[i].guid, ESI_TABLE_GUID) == 0) {
esi = config_tables[i].table;
break;
}
}
if (!esi)
return -ENODEV;
[IA64] esi-support Add support for making ESI calls [1]. ESI stands for "Extensible SAL specification" and is basically a way for invoking firmware subroutines which are identified by a GUID. I don't know whether ESI is used by vendors other than HP (if you do, please let me know) but as firmware "backdoors" go, this seems one of the cleaner methods, so it seems reasonable to support it, even though I'm not aware of any publicly documented ESI calls. I'd have liked to make the ESI module completely stand-alone, but unfortunately that is not easily (or not at all) possible because in order to make ESI calls in physical mode, a small stub similar to the EFI stub is needed in the kernel proper. I did try to create a stub that would work in user-level, but it quickly got ugly beyond recognition (e.g., the stub had to make assumptions about how the module-loader generated call-stubs work) and I didn't even get it to work (that's probably fixable, but I didn't bother because I concluded it was too ugly anyhow). While it's not terribly elegant to have kernel code which isn't actively used in the kernel proper, I think it might be worth making an exception here for two reasons: the code is trivially small (all that's really needed is esi_stub.S) and by including it in the normal kernel distro, it might encourage other OEMs to also use ESI, which I think would be far better than each inventing their own firmware "backdoor". The code was originally written by Alex. I just massaged and packaged it a bit (and perhaps messed up some things along the way...). Changes since first version of patch that was posted to mailing list: * Export ia64_esi_call and ia64_esi_call_phys() as GPL symbols. * Disallow building esi.c as a module for now. Building as a module would currently lead to an unresolved reference to "sal_lock" on SMP kernels because that symbol doesn't get exported. * Export esi_call_phys() only if ESI is enabled. * Remove internal stuff from esi.h and add a "proc_type" argument to ia64_esi_call() such that serialization-requirements can be expressed (ESI follows SAL here, where procedure calls may have to be serialized, are MP-safe, or MP-safe andr reentrant). [1] h21007.www2.hp.com/dspp/tech/tech_TechDocumentDetailPage_IDX/1,1701,919,00.html Signed-off-by: David Mosberger <David.Mosberger@acm.org> Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2006-06-21 22:19:22 +04:00
systab = __va(esi);
if (strncmp(systab->signature, "ESIT", 4) != 0) {
printk(KERN_ERR "bad signature in ESI system table!");
return -ENODEV;
}
p = (char *) (systab + 1);
for (i = 0; i < systab->entry_count; i++) {
/*
* The first byte of each entry type contains the type
* descriptor.
*/
switch (*p) {
case ESI_DESC_ENTRY_POINT:
break;
default:
printk(KERN_WARNING "Unkown table type %d found in "
"ESI table, ignoring rest of table\n", *p);
return -ENODEV;
}
p += ESI_DESC_SIZE(*p);
}
esi_systab = systab;
return 0;
}
int ia64_esi_call (efi_guid_t guid, struct ia64_sal_retval *isrvp,
enum esi_proc_type proc_type, u64 func,
u64 arg1, u64 arg2, u64 arg3, u64 arg4, u64 arg5, u64 arg6,
u64 arg7)
{
struct ia64_fpreg fr[6];
unsigned long flags = 0;
int i;
char *p;
if (!esi_systab)
return -1;
p = (char *) (esi_systab + 1);
for (i = 0; i < esi_systab->entry_count; i++) {
if (*p == ESI_DESC_ENTRY_POINT) {
ia64_esi_desc_entry_point_t *esi = (void *)p;
if (!efi_guidcmp(guid, esi->guid)) {
ia64_sal_handler esi_proc;
struct pdesc pdesc;
pdesc.addr = __va(esi->esi_proc);
pdesc.gp = __va(esi->gp);
esi_proc = (ia64_sal_handler) &pdesc;
ia64_save_scratch_fpregs(fr);
if (proc_type == ESI_PROC_SERIALIZED)
spin_lock_irqsave(&sal_lock, flags);
else if (proc_type == ESI_PROC_MP_SAFE)
local_irq_save(flags);
else
preempt_disable();
*isrvp = (*esi_proc)(func, arg1, arg2, arg3,
arg4, arg5, arg6, arg7);
if (proc_type == ESI_PROC_SERIALIZED)
spin_unlock_irqrestore(&sal_lock,
flags);
else if (proc_type == ESI_PROC_MP_SAFE)
local_irq_restore(flags);
else
preempt_enable();
ia64_load_scratch_fpregs(fr);
return 0;
}
}
p += ESI_DESC_SIZE(*p);
}
return -1;
}
EXPORT_SYMBOL_GPL(ia64_esi_call);
int ia64_esi_call_phys (efi_guid_t guid, struct ia64_sal_retval *isrvp,
u64 func, u64 arg1, u64 arg2, u64 arg3, u64 arg4,
u64 arg5, u64 arg6, u64 arg7)
{
struct ia64_fpreg fr[6];
unsigned long flags;
u64 esi_params[8];
char *p;
int i;
if (!esi_systab)
return -1;
p = (char *) (esi_systab + 1);
for (i = 0; i < esi_systab->entry_count; i++) {
if (*p == ESI_DESC_ENTRY_POINT) {
ia64_esi_desc_entry_point_t *esi = (void *)p;
if (!efi_guidcmp(guid, esi->guid)) {
ia64_sal_handler esi_proc;
struct pdesc pdesc;
pdesc.addr = (void *)esi->esi_proc;
pdesc.gp = (void *)esi->gp;
esi_proc = (ia64_sal_handler) &pdesc;
esi_params[0] = func;
esi_params[1] = arg1;
esi_params[2] = arg2;
esi_params[3] = arg3;
esi_params[4] = arg4;
esi_params[5] = arg5;
esi_params[6] = arg6;
esi_params[7] = arg7;
ia64_save_scratch_fpregs(fr);
spin_lock_irqsave(&sal_lock, flags);
*isrvp = esi_call_phys(esi_proc, esi_params);
spin_unlock_irqrestore(&sal_lock, flags);
ia64_load_scratch_fpregs(fr);
return 0;
}
}
p += ESI_DESC_SIZE(*p);
}
return -1;
}
EXPORT_SYMBOL_GPL(ia64_esi_call_phys);
static void __exit esi_exit (void)
{
}
module_init(esi_init);
module_exit(esi_exit); /* makes module removable... */