WSL2-Linux-Kernel/drivers/iommu/intel-svm.c

648 строки
18 KiB
C
Исходник Обычный вид История

/*
* Copyright © 2015 Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* Authors: David Woodhouse <dwmw2@infradead.org>
*/
#include <linux/intel-iommu.h>
#include <linux/mmu_notifier.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/intel-svm.h>
#include <linux/rculist.h>
#include <linux/pci.h>
#include <linux/pci-ats.h>
#include <linux/dmar.h>
#include <linux/interrupt.h>
static irqreturn_t prq_event_thread(int irq, void *d);
struct pasid_entry {
u64 val;
};
struct pasid_state_entry {
u64 val;
};
int intel_svm_alloc_pasid_tables(struct intel_iommu *iommu)
{
struct page *pages;
int order;
order = ecap_pss(iommu->ecap) + 7 - PAGE_SHIFT;
if (order < 0)
order = 0;
pages = alloc_pages(GFP_KERNEL | __GFP_ZERO, order);
if (!pages) {
pr_warn("IOMMU: %s: Failed to allocate PASID table\n",
iommu->name);
return -ENOMEM;
}
iommu->pasid_table = page_address(pages);
pr_info("%s: Allocated order %d PASID table.\n", iommu->name, order);
if (ecap_dis(iommu->ecap)) {
pages = alloc_pages(GFP_KERNEL | __GFP_ZERO, order);
if (pages)
iommu->pasid_state_table = page_address(pages);
else
pr_warn("IOMMU: %s: Failed to allocate PASID state table\n",
iommu->name);
}
idr_init(&iommu->pasid_idr);
return 0;
}
int intel_svm_free_pasid_tables(struct intel_iommu *iommu)
{
int order;
order = ecap_pss(iommu->ecap) + 7 - PAGE_SHIFT;
if (order < 0)
order = 0;
if (iommu->pasid_table) {
free_pages((unsigned long)iommu->pasid_table, order);
iommu->pasid_table = NULL;
}
if (iommu->pasid_state_table) {
free_pages((unsigned long)iommu->pasid_state_table, order);
iommu->pasid_state_table = NULL;
}
idr_destroy(&iommu->pasid_idr);
return 0;
}
#define PRQ_ORDER 0
int intel_svm_enable_prq(struct intel_iommu *iommu)
{
struct page *pages;
int irq, ret;
pages = alloc_pages(GFP_KERNEL | __GFP_ZERO, PRQ_ORDER);
if (!pages) {
pr_warn("IOMMU: %s: Failed to allocate page request queue\n",
iommu->name);
return -ENOMEM;
}
iommu->prq = page_address(pages);
irq = dmar_alloc_hwirq(DMAR_UNITS_SUPPORTED + iommu->seq_id, iommu->node, iommu);
if (irq <= 0) {
pr_err("IOMMU: %s: Failed to create IRQ vector for page request queue\n",
iommu->name);
ret = -EINVAL;
err:
free_pages((unsigned long)iommu->prq, PRQ_ORDER);
iommu->prq = NULL;
return ret;
}
iommu->pr_irq = irq;
snprintf(iommu->prq_name, sizeof(iommu->prq_name), "dmar%d-prq", iommu->seq_id);
ret = request_threaded_irq(irq, NULL, prq_event_thread, IRQF_ONESHOT,
iommu->prq_name, iommu);
if (ret) {
pr_err("IOMMU: %s: Failed to request IRQ for page request queue\n",
iommu->name);
dmar_free_hwirq(irq);
goto err;
}
dmar_writeq(iommu->reg + DMAR_PQH_REG, 0ULL);
dmar_writeq(iommu->reg + DMAR_PQT_REG, 0ULL);
dmar_writeq(iommu->reg + DMAR_PQA_REG, virt_to_phys(iommu->prq) | PRQ_ORDER);
return 0;
}
int intel_svm_finish_prq(struct intel_iommu *iommu)
{
dmar_writeq(iommu->reg + DMAR_PQH_REG, 0ULL);
dmar_writeq(iommu->reg + DMAR_PQT_REG, 0ULL);
dmar_writeq(iommu->reg + DMAR_PQA_REG, 0ULL);
free_irq(iommu->pr_irq, iommu);
dmar_free_hwirq(iommu->pr_irq);
iommu->pr_irq = 0;
free_pages((unsigned long)iommu->prq, PRQ_ORDER);
iommu->prq = NULL;
return 0;
}
static void intel_flush_svm_range_dev (struct intel_svm *svm, struct intel_svm_dev *sdev,
unsigned long address, unsigned long pages, int ih, int gl)
{
struct qi_desc desc;
if (pages == -1) {
/* For global kernel pages we have to flush them in *all* PASIDs
* because that's the only option the hardware gives us. Despite
* the fact that they are actually only accessible through one. */
if (gl)
desc.low = QI_EIOTLB_PASID(svm->pasid) | QI_EIOTLB_DID(sdev->did) |
QI_EIOTLB_GRAN(QI_GRAN_ALL_ALL) | QI_EIOTLB_TYPE;
else
desc.low = QI_EIOTLB_PASID(svm->pasid) | QI_EIOTLB_DID(sdev->did) |
QI_EIOTLB_GRAN(QI_GRAN_NONG_PASID) | QI_EIOTLB_TYPE;
desc.high = 0;
} else {
int mask = ilog2(__roundup_pow_of_two(pages));
desc.low = QI_EIOTLB_PASID(svm->pasid) | QI_EIOTLB_DID(sdev->did) |
QI_EIOTLB_GRAN(QI_GRAN_PSI_PASID) | QI_EIOTLB_TYPE;
desc.high = QI_EIOTLB_ADDR(address) | QI_EIOTLB_GL(gl) |
QI_EIOTLB_IH(ih) | QI_EIOTLB_AM(mask);
}
qi_submit_sync(&desc, svm->iommu);
if (sdev->dev_iotlb) {
desc.low = QI_DEV_EIOTLB_PASID(svm->pasid) | QI_DEV_EIOTLB_SID(sdev->sid) |
QI_DEV_EIOTLB_QDEP(sdev->qdep) | QI_DEIOTLB_TYPE;
if (pages == -1) {
desc.high = QI_DEV_EIOTLB_ADDR(-1ULL >> 1) | QI_DEV_EIOTLB_SIZE;
} else if (pages > 1) {
/* The least significant zero bit indicates the size. So,
* for example, an "address" value of 0x12345f000 will
* flush from 0x123440000 to 0x12347ffff (256KiB). */
unsigned long last = address + ((unsigned long)(pages - 1) << VTD_PAGE_SHIFT);
unsigned long mask = __rounddown_pow_of_two(address ^ last);;
desc.high = QI_DEV_EIOTLB_ADDR((address & ~mask) | (mask - 1)) | QI_DEV_EIOTLB_SIZE;
} else {
desc.high = QI_DEV_EIOTLB_ADDR(address);
}
qi_submit_sync(&desc, svm->iommu);
}
}
static void intel_flush_svm_range(struct intel_svm *svm, unsigned long address,
unsigned long pages, int ih, int gl)
{
struct intel_svm_dev *sdev;
/* Try deferred invalidate if available */
if (svm->iommu->pasid_state_table &&
!cmpxchg64(&svm->iommu->pasid_state_table[svm->pasid].val, 0, 1ULL << 63))
return;
rcu_read_lock();
list_for_each_entry_rcu(sdev, &svm->devs, list)
intel_flush_svm_range_dev(svm, sdev, address, pages, ih, gl);
rcu_read_unlock();
}
static void intel_change_pte(struct mmu_notifier *mn, struct mm_struct *mm,
unsigned long address, pte_t pte)
{
struct intel_svm *svm = container_of(mn, struct intel_svm, notifier);
intel_flush_svm_range(svm, address, 1, 1, 0);
}
static void intel_invalidate_page(struct mmu_notifier *mn, struct mm_struct *mm,
unsigned long address)
{
struct intel_svm *svm = container_of(mn, struct intel_svm, notifier);
intel_flush_svm_range(svm, address, 1, 1, 0);
}
/* Pages have been freed at this point */
static void intel_invalidate_range(struct mmu_notifier *mn,
struct mm_struct *mm,
unsigned long start, unsigned long end)
{
struct intel_svm *svm = container_of(mn, struct intel_svm, notifier);
intel_flush_svm_range(svm, start,
(end - start + PAGE_SIZE - 1) >> VTD_PAGE_SHIFT, 0, 0);
}
static void intel_flush_pasid_dev(struct intel_svm *svm, struct intel_svm_dev *sdev, int pasid)
{
struct qi_desc desc;
desc.high = 0;
desc.low = QI_PC_TYPE | QI_PC_DID(sdev->did) | QI_PC_PASID_SEL | QI_PC_PASID(pasid);
qi_submit_sync(&desc, svm->iommu);
}
static void intel_mm_release(struct mmu_notifier *mn, struct mm_struct *mm)
{
struct intel_svm *svm = container_of(mn, struct intel_svm, notifier);
iommu/vt-d: Fix mm refcounting to hold mm_count not mm_users Holding mm_users works OK for graphics, which was the first user of SVM with VT-d. However, it works less well for other devices, where we actually do a mmap() from the file descriptor to which the SVM PASID state is tied. In this case on process exit we end up with a recursive reference count: - The MM remains alive until the file is closed and the driver's release() call ends up unbinding the PASID. - The VMA corresponding to the mmap() remains intact until the MM is destroyed. - Thus the file isn't closed, even when exit_files() runs, because the VMA is still holding a reference to it. And the MM remains alive… To address this issue, we *stop* holding mm_users while the PASID is bound. We already hold mm_count by virtue of the MMU notifier, and that can be made to be sufficient. It means that for a period during process exit, the fun part of mmput() has happened and exit_mmap() has been called so the MM is basically defunct. But the PGD still exists and the PASID is still bound to it. During this period, we have to be very careful — exit_mmap() doesn't use mm->mmap_sem because it doesn't expect anyone else to be touching the MM (quite reasonably, since mm_users is zero). So we also need to fix the fault handler to just report failure if mm_users is already zero, and to temporarily bump mm_users while handling any faults. Additionally, exit_mmap() calls mmu_notifier_release() *before* it tears down the page tables, which is too early for us to flush the IOTLB for this PASID. And __mmu_notifier_release() removes every notifier from the list, so when exit_mmap() finally *does* tear down the mappings and clear the page tables, we don't get notified. So we work around this by clearing the PASID table entry in our MMU notifier release() callback. That way, the hardware *can't* get any pages back from the page tables before they get cleared. Hardware designers have confirmed that the resulting 'PASID not present' faults should be handled just as gracefully as 'page not present' faults, the important criterion being that they don't perturb the operation for any *other* PASID in the system. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable@vger.kernel.org
2016-01-12 22:18:06 +03:00
struct intel_svm_dev *sdev;
iommu/vt-d: Fix mm refcounting to hold mm_count not mm_users Holding mm_users works OK for graphics, which was the first user of SVM with VT-d. However, it works less well for other devices, where we actually do a mmap() from the file descriptor to which the SVM PASID state is tied. In this case on process exit we end up with a recursive reference count: - The MM remains alive until the file is closed and the driver's release() call ends up unbinding the PASID. - The VMA corresponding to the mmap() remains intact until the MM is destroyed. - Thus the file isn't closed, even when exit_files() runs, because the VMA is still holding a reference to it. And the MM remains alive… To address this issue, we *stop* holding mm_users while the PASID is bound. We already hold mm_count by virtue of the MMU notifier, and that can be made to be sufficient. It means that for a period during process exit, the fun part of mmput() has happened and exit_mmap() has been called so the MM is basically defunct. But the PGD still exists and the PASID is still bound to it. During this period, we have to be very careful — exit_mmap() doesn't use mm->mmap_sem because it doesn't expect anyone else to be touching the MM (quite reasonably, since mm_users is zero). So we also need to fix the fault handler to just report failure if mm_users is already zero, and to temporarily bump mm_users while handling any faults. Additionally, exit_mmap() calls mmu_notifier_release() *before* it tears down the page tables, which is too early for us to flush the IOTLB for this PASID. And __mmu_notifier_release() removes every notifier from the list, so when exit_mmap() finally *does* tear down the mappings and clear the page tables, we don't get notified. So we work around this by clearing the PASID table entry in our MMU notifier release() callback. That way, the hardware *can't* get any pages back from the page tables before they get cleared. Hardware designers have confirmed that the resulting 'PASID not present' faults should be handled just as gracefully as 'page not present' faults, the important criterion being that they don't perturb the operation for any *other* PASID in the system. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable@vger.kernel.org
2016-01-12 22:18:06 +03:00
/* This might end up being called from exit_mmap(), *before* the page
* tables are cleared. And __mmu_notifier_release() will delete us from
* the list of notifiers so that our invalidate_range() callback doesn't
* get called when the page tables are cleared. So we need to protect
* against hardware accessing those page tables.
*
* We do it by clearing the entry in the PASID table and then flushing
* the IOTLB and the PASID table caches. This might upset hardware;
* perhaps we'll want to point the PASID to a dummy PGD (like the zero
* page) so that we end up taking a fault that the hardware really
* *has* to handle gracefully without affecting other processes.
*/
svm->iommu->pasid_table[svm->pasid].val = 0;
iommu/vt-d: Fix mm refcounting to hold mm_count not mm_users Holding mm_users works OK for graphics, which was the first user of SVM with VT-d. However, it works less well for other devices, where we actually do a mmap() from the file descriptor to which the SVM PASID state is tied. In this case on process exit we end up with a recursive reference count: - The MM remains alive until the file is closed and the driver's release() call ends up unbinding the PASID. - The VMA corresponding to the mmap() remains intact until the MM is destroyed. - Thus the file isn't closed, even when exit_files() runs, because the VMA is still holding a reference to it. And the MM remains alive… To address this issue, we *stop* holding mm_users while the PASID is bound. We already hold mm_count by virtue of the MMU notifier, and that can be made to be sufficient. It means that for a period during process exit, the fun part of mmput() has happened and exit_mmap() has been called so the MM is basically defunct. But the PGD still exists and the PASID is still bound to it. During this period, we have to be very careful — exit_mmap() doesn't use mm->mmap_sem because it doesn't expect anyone else to be touching the MM (quite reasonably, since mm_users is zero). So we also need to fix the fault handler to just report failure if mm_users is already zero, and to temporarily bump mm_users while handling any faults. Additionally, exit_mmap() calls mmu_notifier_release() *before* it tears down the page tables, which is too early for us to flush the IOTLB for this PASID. And __mmu_notifier_release() removes every notifier from the list, so when exit_mmap() finally *does* tear down the mappings and clear the page tables, we don't get notified. So we work around this by clearing the PASID table entry in our MMU notifier release() callback. That way, the hardware *can't* get any pages back from the page tables before they get cleared. Hardware designers have confirmed that the resulting 'PASID not present' faults should be handled just as gracefully as 'page not present' faults, the important criterion being that they don't perturb the operation for any *other* PASID in the system. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable@vger.kernel.org
2016-01-12 22:18:06 +03:00
wmb();
rcu_read_lock();
list_for_each_entry_rcu(sdev, &svm->devs, list) {
intel_flush_pasid_dev(svm, sdev, svm->pasid);
intel_flush_svm_range_dev(svm, sdev, 0, -1, 0, !svm->mm);
}
rcu_read_unlock();
}
static const struct mmu_notifier_ops intel_mmuops = {
.release = intel_mm_release,
.change_pte = intel_change_pte,
.invalidate_page = intel_invalidate_page,
.invalidate_range = intel_invalidate_range,
};
static DEFINE_MUTEX(pasid_mutex);
int intel_svm_bind_mm(struct device *dev, int *pasid, int flags, struct svm_dev_ops *ops)
{
struct intel_iommu *iommu = intel_svm_device_to_iommu(dev);
struct intel_svm_dev *sdev;
struct intel_svm *svm = NULL;
struct mm_struct *mm = NULL;
int pasid_max;
int ret;
if (WARN_ON(!iommu))
return -EINVAL;
if (dev_is_pci(dev)) {
pasid_max = pci_max_pasids(to_pci_dev(dev));
if (pasid_max < 0)
return -EINVAL;
} else
pasid_max = 1 << 20;
if ((flags & SVM_FLAG_SUPERVISOR_MODE)) {
if (!ecap_srs(iommu->ecap))
return -EINVAL;
} else if (pasid) {
mm = get_task_mm(current);
BUG_ON(!mm);
}
mutex_lock(&pasid_mutex);
if (pasid && !(flags & SVM_FLAG_PRIVATE_PASID)) {
int i;
idr_for_each_entry(&iommu->pasid_idr, svm, i) {
if (svm->mm != mm ||
(svm->flags & SVM_FLAG_PRIVATE_PASID))
continue;
if (svm->pasid >= pasid_max) {
dev_warn(dev,
"Limited PASID width. Cannot use existing PASID %d\n",
svm->pasid);
ret = -ENOSPC;
goto out;
}
list_for_each_entry(sdev, &svm->devs, list) {
if (dev == sdev->dev) {
if (sdev->ops != ops) {
ret = -EBUSY;
goto out;
}
sdev->users++;
goto success;
}
}
break;
}
}
sdev = kzalloc(sizeof(*sdev), GFP_KERNEL);
if (!sdev) {
ret = -ENOMEM;
goto out;
}
sdev->dev = dev;
ret = intel_iommu_enable_pasid(iommu, sdev);
if (ret || !pasid) {
/* If they don't actually want to assign a PASID, this is
* just an enabling check/preparation. */
kfree(sdev);
goto out;
}
/* Finish the setup now we know we're keeping it */
sdev->users = 1;
sdev->ops = ops;
init_rcu_head(&sdev->rcu);
if (!svm) {
svm = kzalloc(sizeof(*svm), GFP_KERNEL);
if (!svm) {
ret = -ENOMEM;
kfree(sdev);
goto out;
}
svm->iommu = iommu;
if (pasid_max > 2 << ecap_pss(iommu->ecap))
pasid_max = 2 << ecap_pss(iommu->ecap);
/* Do not use PASID 0 in caching mode (virtualised IOMMU) */
ret = idr_alloc(&iommu->pasid_idr, svm,
!!cap_caching_mode(iommu->cap),
pasid_max - 1, GFP_KERNEL);
if (ret < 0) {
kfree(svm);
goto out;
}
svm->pasid = ret;
svm->notifier.ops = &intel_mmuops;
svm->mm = mm;
svm->flags = flags;
INIT_LIST_HEAD_RCU(&svm->devs);
ret = -ENOMEM;
if (mm) {
ret = mmu_notifier_register(&svm->notifier, mm);
if (ret) {
idr_remove(&svm->iommu->pasid_idr, svm->pasid);
kfree(svm);
kfree(sdev);
goto out;
}
iommu->pasid_table[svm->pasid].val = (u64)__pa(mm->pgd) | 1;
} else
iommu->pasid_table[svm->pasid].val = (u64)__pa(init_mm.pgd) | 1 | (1ULL << 11);
wmb();
/* In caching mode, we still have to flush with PASID 0 when
* a PASID table entry becomes present. Not entirely clear
* *why* that would be the case surely we could just issue
* a flush with the PASID value that we've changed? The PASID
* is the index into the table, after all. It's not like domain
* IDs in the case of the equivalent context-entry change in
* caching mode. And for that matter it's not entirely clear why
* a VMM would be in the business of caching the PASID table
* anyway. Surely that can be left entirely to the guest? */
if (cap_caching_mode(iommu->cap))
intel_flush_pasid_dev(svm, sdev, 0);
}
list_add_rcu(&sdev->list, &svm->devs);
success:
*pasid = svm->pasid;
ret = 0;
out:
mutex_unlock(&pasid_mutex);
if (mm)
mmput(mm);
return ret;
}
EXPORT_SYMBOL_GPL(intel_svm_bind_mm);
int intel_svm_unbind_mm(struct device *dev, int pasid)
{
struct intel_svm_dev *sdev;
struct intel_iommu *iommu;
struct intel_svm *svm;
int ret = -EINVAL;
mutex_lock(&pasid_mutex);
iommu = intel_svm_device_to_iommu(dev);
if (!iommu || !iommu->pasid_table)
goto out;
svm = idr_find(&iommu->pasid_idr, pasid);
if (!svm)
goto out;
list_for_each_entry(sdev, &svm->devs, list) {
if (dev == sdev->dev) {
ret = 0;
sdev->users--;
if (!sdev->users) {
list_del_rcu(&sdev->list);
/* Flush the PASID cache and IOTLB for this device.
* Note that we do depend on the hardware *not* using
* the PASID any more. Just as we depend on other
* devices never using PASIDs that they have no right
* to use. We have a *shared* PASID table, because it's
* large and has to be physically contiguous. So it's
* hard to be as defensive as we might like. */
intel_flush_pasid_dev(svm, sdev, svm->pasid);
intel_flush_svm_range_dev(svm, sdev, 0, -1, 0, !svm->mm);
kfree_rcu(sdev, rcu);
if (list_empty(&svm->devs)) {
idr_remove(&svm->iommu->pasid_idr, svm->pasid);
if (svm->mm)
iommu/vt-d: Fix mm refcounting to hold mm_count not mm_users Holding mm_users works OK for graphics, which was the first user of SVM with VT-d. However, it works less well for other devices, where we actually do a mmap() from the file descriptor to which the SVM PASID state is tied. In this case on process exit we end up with a recursive reference count: - The MM remains alive until the file is closed and the driver's release() call ends up unbinding the PASID. - The VMA corresponding to the mmap() remains intact until the MM is destroyed. - Thus the file isn't closed, even when exit_files() runs, because the VMA is still holding a reference to it. And the MM remains alive… To address this issue, we *stop* holding mm_users while the PASID is bound. We already hold mm_count by virtue of the MMU notifier, and that can be made to be sufficient. It means that for a period during process exit, the fun part of mmput() has happened and exit_mmap() has been called so the MM is basically defunct. But the PGD still exists and the PASID is still bound to it. During this period, we have to be very careful — exit_mmap() doesn't use mm->mmap_sem because it doesn't expect anyone else to be touching the MM (quite reasonably, since mm_users is zero). So we also need to fix the fault handler to just report failure if mm_users is already zero, and to temporarily bump mm_users while handling any faults. Additionally, exit_mmap() calls mmu_notifier_release() *before* it tears down the page tables, which is too early for us to flush the IOTLB for this PASID. And __mmu_notifier_release() removes every notifier from the list, so when exit_mmap() finally *does* tear down the mappings and clear the page tables, we don't get notified. So we work around this by clearing the PASID table entry in our MMU notifier release() callback. That way, the hardware *can't* get any pages back from the page tables before they get cleared. Hardware designers have confirmed that the resulting 'PASID not present' faults should be handled just as gracefully as 'page not present' faults, the important criterion being that they don't perturb the operation for any *other* PASID in the system. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable@vger.kernel.org
2016-01-12 22:18:06 +03:00
mmu_notifier_unregister(&svm->notifier, svm->mm);
/* We mandate that no page faults may be outstanding
* for the PASID when intel_svm_unbind_mm() is called.
* If that is not obeyed, subtle errors will happen.
* Let's make them less subtle... */
memset(svm, 0x6b, sizeof(*svm));
kfree(svm);
}
}
break;
}
}
out:
mutex_unlock(&pasid_mutex);
return ret;
}
EXPORT_SYMBOL_GPL(intel_svm_unbind_mm);
/* Page request queue descriptor */
struct page_req_dsc {
u64 srr:1;
u64 bof:1;
u64 pasid_present:1;
u64 lpig:1;
u64 pasid:20;
u64 bus:8;
u64 private:23;
u64 prg_index:9;
u64 rd_req:1;
u64 wr_req:1;
u64 exe_req:1;
u64 priv_req:1;
u64 devfn:8;
u64 addr:52;
};
#define PRQ_RING_MASK ((0x1000 << PRQ_ORDER) - 0x10)
static bool access_error(struct vm_area_struct *vma, struct page_req_dsc *req)
{
unsigned long requested = 0;
if (req->exe_req)
requested |= VM_EXEC;
if (req->rd_req)
requested |= VM_READ;
if (req->wr_req)
requested |= VM_WRITE;
return (requested & ~vma->vm_flags) != 0;
}
static irqreturn_t prq_event_thread(int irq, void *d)
{
struct intel_iommu *iommu = d;
struct intel_svm *svm = NULL;
int head, tail, handled = 0;
/* Clear PPR bit before reading head/tail registers, to
* ensure that we get a new interrupt if needed. */
writel(DMA_PRS_PPR, iommu->reg + DMAR_PRS_REG);
tail = dmar_readq(iommu->reg + DMAR_PQT_REG) & PRQ_RING_MASK;
head = dmar_readq(iommu->reg + DMAR_PQH_REG) & PRQ_RING_MASK;
while (head != tail) {
struct intel_svm_dev *sdev;
struct vm_area_struct *vma;
struct page_req_dsc *req;
struct qi_desc resp;
int ret, result;
u64 address;
handled = 1;
req = &iommu->prq[head / sizeof(*req)];
result = QI_RESP_FAILURE;
address = (u64)req->addr << VTD_PAGE_SHIFT;
if (!req->pasid_present) {
pr_err("%s: Page request without PASID: %08llx %08llx\n",
iommu->name, ((unsigned long long *)req)[0],
((unsigned long long *)req)[1]);
goto bad_req;
}
if (!svm || svm->pasid != req->pasid) {
rcu_read_lock();
svm = idr_find(&iommu->pasid_idr, req->pasid);
/* It *can't* go away, because the driver is not permitted
* to unbind the mm while any page faults are outstanding.
* So we only need RCU to protect the internal idr code. */
rcu_read_unlock();
if (!svm) {
pr_err("%s: Page request for invalid PASID %d: %08llx %08llx\n",
iommu->name, req->pasid, ((unsigned long long *)req)[0],
((unsigned long long *)req)[1]);
goto no_pasid;
}
}
result = QI_RESP_INVALID;
/* Since we're using init_mm.pgd directly, we should never take
* any faults on kernel addresses. */
if (!svm->mm)
goto bad_req;
iommu/vt-d: Fix mm refcounting to hold mm_count not mm_users Holding mm_users works OK for graphics, which was the first user of SVM with VT-d. However, it works less well for other devices, where we actually do a mmap() from the file descriptor to which the SVM PASID state is tied. In this case on process exit we end up with a recursive reference count: - The MM remains alive until the file is closed and the driver's release() call ends up unbinding the PASID. - The VMA corresponding to the mmap() remains intact until the MM is destroyed. - Thus the file isn't closed, even when exit_files() runs, because the VMA is still holding a reference to it. And the MM remains alive… To address this issue, we *stop* holding mm_users while the PASID is bound. We already hold mm_count by virtue of the MMU notifier, and that can be made to be sufficient. It means that for a period during process exit, the fun part of mmput() has happened and exit_mmap() has been called so the MM is basically defunct. But the PGD still exists and the PASID is still bound to it. During this period, we have to be very careful — exit_mmap() doesn't use mm->mmap_sem because it doesn't expect anyone else to be touching the MM (quite reasonably, since mm_users is zero). So we also need to fix the fault handler to just report failure if mm_users is already zero, and to temporarily bump mm_users while handling any faults. Additionally, exit_mmap() calls mmu_notifier_release() *before* it tears down the page tables, which is too early for us to flush the IOTLB for this PASID. And __mmu_notifier_release() removes every notifier from the list, so when exit_mmap() finally *does* tear down the mappings and clear the page tables, we don't get notified. So we work around this by clearing the PASID table entry in our MMU notifier release() callback. That way, the hardware *can't* get any pages back from the page tables before they get cleared. Hardware designers have confirmed that the resulting 'PASID not present' faults should be handled just as gracefully as 'page not present' faults, the important criterion being that they don't perturb the operation for any *other* PASID in the system. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable@vger.kernel.org
2016-01-12 22:18:06 +03:00
/* If the mm is already defunct, don't handle faults. */
if (!atomic_inc_not_zero(&svm->mm->mm_users))
goto bad_req;
down_read(&svm->mm->mmap_sem);
vma = find_extend_vma(svm->mm, address);
if (!vma || address < vma->vm_start)
goto invalid;
if (access_error(vma, req))
goto invalid;
ret = handle_mm_fault(svm->mm, vma, address,
req->wr_req ? FAULT_FLAG_WRITE : 0);
if (ret & VM_FAULT_ERROR)
goto invalid;
result = QI_RESP_SUCCESS;
invalid:
up_read(&svm->mm->mmap_sem);
iommu/vt-d: Fix mm refcounting to hold mm_count not mm_users Holding mm_users works OK for graphics, which was the first user of SVM with VT-d. However, it works less well for other devices, where we actually do a mmap() from the file descriptor to which the SVM PASID state is tied. In this case on process exit we end up with a recursive reference count: - The MM remains alive until the file is closed and the driver's release() call ends up unbinding the PASID. - The VMA corresponding to the mmap() remains intact until the MM is destroyed. - Thus the file isn't closed, even when exit_files() runs, because the VMA is still holding a reference to it. And the MM remains alive… To address this issue, we *stop* holding mm_users while the PASID is bound. We already hold mm_count by virtue of the MMU notifier, and that can be made to be sufficient. It means that for a period during process exit, the fun part of mmput() has happened and exit_mmap() has been called so the MM is basically defunct. But the PGD still exists and the PASID is still bound to it. During this period, we have to be very careful — exit_mmap() doesn't use mm->mmap_sem because it doesn't expect anyone else to be touching the MM (quite reasonably, since mm_users is zero). So we also need to fix the fault handler to just report failure if mm_users is already zero, and to temporarily bump mm_users while handling any faults. Additionally, exit_mmap() calls mmu_notifier_release() *before* it tears down the page tables, which is too early for us to flush the IOTLB for this PASID. And __mmu_notifier_release() removes every notifier from the list, so when exit_mmap() finally *does* tear down the mappings and clear the page tables, we don't get notified. So we work around this by clearing the PASID table entry in our MMU notifier release() callback. That way, the hardware *can't* get any pages back from the page tables before they get cleared. Hardware designers have confirmed that the resulting 'PASID not present' faults should be handled just as gracefully as 'page not present' faults, the important criterion being that they don't perturb the operation for any *other* PASID in the system. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable@vger.kernel.org
2016-01-12 22:18:06 +03:00
mmput(svm->mm);
bad_req:
/* Accounting for major/minor faults? */
rcu_read_lock();
list_for_each_entry_rcu(sdev, &svm->devs, list) {
if (sdev->sid == PCI_DEVID(req->bus, req->devfn))
break;
}
/* Other devices can go away, but the drivers are not permitted
* to unbind while any page faults might be in flight. So it's
* OK to drop the 'lock' here now we have it. */
rcu_read_unlock();
if (WARN_ON(&sdev->list == &svm->devs))
sdev = NULL;
if (sdev && sdev->ops && sdev->ops->fault_cb) {
int rwxp = (req->rd_req << 3) | (req->wr_req << 2) |
(req->exe_req << 1) | (req->priv_req);
sdev->ops->fault_cb(sdev->dev, req->pasid, req->addr, req->private, rwxp, result);
}
/* We get here in the error case where the PASID lookup failed,
and these can be NULL. Do not use them below this point! */
sdev = NULL;
svm = NULL;
no_pasid:
if (req->lpig) {
/* Page Group Response */
resp.low = QI_PGRP_PASID(req->pasid) |
QI_PGRP_DID((req->bus << 8) | req->devfn) |
QI_PGRP_PASID_P(req->pasid_present) |
QI_PGRP_RESP_TYPE;
resp.high = QI_PGRP_IDX(req->prg_index) |
QI_PGRP_PRIV(req->private) | QI_PGRP_RESP_CODE(result);
qi_submit_sync(&resp, iommu);
} else if (req->srr) {
/* Page Stream Response */
resp.low = QI_PSTRM_IDX(req->prg_index) |
QI_PSTRM_PRIV(req->private) | QI_PSTRM_BUS(req->bus) |
QI_PSTRM_PASID(req->pasid) | QI_PSTRM_RESP_TYPE;
resp.high = QI_PSTRM_ADDR(address) | QI_PSTRM_DEVFN(req->devfn) |
QI_PSTRM_RESP_CODE(result);
qi_submit_sync(&resp, iommu);
}
head = (head + sizeof(*req)) & PRQ_RING_MASK;
}
dmar_writeq(iommu->reg + DMAR_PQH_REG, tail);
return IRQ_RETVAL(handled);
}