WSL2-Linux-Kernel/lib/zlib_dfltcc/dfltcc.c

56 строки
1.6 KiB
C
Исходник Обычный вид История

lib/zlib: add s390 hardware support for kernel zlib_deflate Patch series "S390 hardware support for kernel zlib", v3. With IBM z15 mainframe the new DFLTCC instruction is available. It implements deflate algorithm in hardware (Nest Acceleration Unit - NXU) with estimated compression and decompression performance orders of magnitude faster than the current zlib. This patchset adds s390 hardware compression support to kernel zlib. The code is based on the userspace zlib implementation: https://github.com/madler/zlib/pull/410 The coding style is also preserved for future maintainability. There is only limited set of userspace zlib functions represented in kernel. Apart from that, all the memory allocation should be performed in advance. Thus, the workarea structures are extended with the parameter lists required for the DEFLATE CONVENTION CALL instruction. Since kernel zlib itself does not support gzip headers, only Adler-32 checksum is processed (also can be produced by DFLTCC facility). Like it was implemented for userspace, kernel zlib will compress in hardware on level 1, and in software on all other levels. Decompression will always happen in hardware (when enabled). Two DFLTCC compression calls produce the same results only when they both are made on machines of the same generation, and when the respective buffers have the same offset relative to the start of the page. Therefore care should be taken when using hardware compression when reproducible results are desired. However it does always produce the standard conform output which can be inflated anyway. The new kernel command line parameter 'dfltcc' is introduced to configure s390 zlib hardware support: Format: { on | off | def_only | inf_only | always } on: s390 zlib hardware support for compression on level 1 and decompression (default) off: No s390 zlib hardware support def_only: s390 zlib hardware support for deflate only (compression on level 1) inf_only: s390 zlib hardware support for inflate only (decompression) always: Same as 'on' but ignores the selected compression level always using hardware support (used for debugging) The main purpose of the integration of the NXU support into the kernel zlib is the use of hardware deflate in btrfs filesystem with on-the-fly compression enabled. Apart from that, hardware support can also be used during boot for decompressing the kernel or the ramdisk image With the patch for btrfs expanding zlib buffer from 1 to 4 pages (patch 6) the following performance results have been achieved using the ramdisk with btrfs. These are relative numbers based on throughput rate and compression ratio for zlib level 1: Input data Deflate rate Inflate rate Compression ratio NXU/Software NXU/Software NXU/Software stream of zeroes 1.46 1.02 1.00 random ASCII data 10.44 3.00 0.96 ASCII text (dickens) 6,21 3.33 0.94 binary data (vmlinux) 8,37 3.90 1.02 This means that s390 hardware deflate can provide up to 10 times faster compression (on level 1) and up to 4 times faster decompression (refers to all compression levels) for btrfs zlib. Disclaimer: Performance results are based on IBM internal tests using DD command-line utility on btrfs on a Fedora 30 based internal driver in native LPAR on a z15 system. Results may vary based on individual workload, configuration and software levels. This patch (of 9): Create zlib_dfltcc library with the s390 DEFLATE CONVERSION CALL implementation and related compression functions. Update zlib_deflate functions with the hooks for s390 hardware support and adjust workspace structures with extra parameter lists required for hardware deflate. Link: http://lkml.kernel.org/r/20200103223334.20669-2-zaslonko@linux.ibm.com Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Co-developed-by: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Chris Mason <clm@fb.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Sterba <dsterba@suse.com> Cc: Eduard Shishkin <edward6@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31 09:16:17 +03:00
// SPDX-License-Identifier: Zlib
/* dfltcc.c - SystemZ DEFLATE CONVERSION CALL support. */
#include <linux/zutil.h>
#include "dfltcc_util.h"
#include "dfltcc.h"
char *oesc_msg(
char *buf,
int oesc
)
{
if (oesc == 0x00)
return NULL; /* Successful completion */
else {
#ifdef STATIC
return NULL; /* Ignore for pre-boot decompressor */
#else
sprintf(buf, "Operation-Ending-Supplemental Code is 0x%.2X", oesc);
return buf;
#endif
}
}
void dfltcc_reset(
z_streamp strm,
uInt size
)
{
struct dfltcc_state *dfltcc_state =
(struct dfltcc_state *)((char *)strm->state + size);
struct dfltcc_qaf_param *param =
(struct dfltcc_qaf_param *)&dfltcc_state->param;
/* Initialize available functions */
if (is_dfltcc_enabled()) {
dfltcc(DFLTCC_QAF, param, NULL, NULL, NULL, NULL, NULL);
memmove(&dfltcc_state->af, param, sizeof(dfltcc_state->af));
} else
memset(&dfltcc_state->af, 0, sizeof(dfltcc_state->af));
/* Initialize parameter block */
memset(&dfltcc_state->param, 0, sizeof(dfltcc_state->param));
dfltcc_state->param.nt = 1;
/* Initialize tuning parameters */
if (zlib_dfltcc_support == ZLIB_DFLTCC_FULL_DEBUG)
dfltcc_state->level_mask = DFLTCC_LEVEL_MASK_DEBUG;
else
dfltcc_state->level_mask = DFLTCC_LEVEL_MASK;
lib/zlib: add s390 hardware support for kernel zlib_deflate Patch series "S390 hardware support for kernel zlib", v3. With IBM z15 mainframe the new DFLTCC instruction is available. It implements deflate algorithm in hardware (Nest Acceleration Unit - NXU) with estimated compression and decompression performance orders of magnitude faster than the current zlib. This patchset adds s390 hardware compression support to kernel zlib. The code is based on the userspace zlib implementation: https://github.com/madler/zlib/pull/410 The coding style is also preserved for future maintainability. There is only limited set of userspace zlib functions represented in kernel. Apart from that, all the memory allocation should be performed in advance. Thus, the workarea structures are extended with the parameter lists required for the DEFLATE CONVENTION CALL instruction. Since kernel zlib itself does not support gzip headers, only Adler-32 checksum is processed (also can be produced by DFLTCC facility). Like it was implemented for userspace, kernel zlib will compress in hardware on level 1, and in software on all other levels. Decompression will always happen in hardware (when enabled). Two DFLTCC compression calls produce the same results only when they both are made on machines of the same generation, and when the respective buffers have the same offset relative to the start of the page. Therefore care should be taken when using hardware compression when reproducible results are desired. However it does always produce the standard conform output which can be inflated anyway. The new kernel command line parameter 'dfltcc' is introduced to configure s390 zlib hardware support: Format: { on | off | def_only | inf_only | always } on: s390 zlib hardware support for compression on level 1 and decompression (default) off: No s390 zlib hardware support def_only: s390 zlib hardware support for deflate only (compression on level 1) inf_only: s390 zlib hardware support for inflate only (decompression) always: Same as 'on' but ignores the selected compression level always using hardware support (used for debugging) The main purpose of the integration of the NXU support into the kernel zlib is the use of hardware deflate in btrfs filesystem with on-the-fly compression enabled. Apart from that, hardware support can also be used during boot for decompressing the kernel or the ramdisk image With the patch for btrfs expanding zlib buffer from 1 to 4 pages (patch 6) the following performance results have been achieved using the ramdisk with btrfs. These are relative numbers based on throughput rate and compression ratio for zlib level 1: Input data Deflate rate Inflate rate Compression ratio NXU/Software NXU/Software NXU/Software stream of zeroes 1.46 1.02 1.00 random ASCII data 10.44 3.00 0.96 ASCII text (dickens) 6,21 3.33 0.94 binary data (vmlinux) 8,37 3.90 1.02 This means that s390 hardware deflate can provide up to 10 times faster compression (on level 1) and up to 4 times faster decompression (refers to all compression levels) for btrfs zlib. Disclaimer: Performance results are based on IBM internal tests using DD command-line utility on btrfs on a Fedora 30 based internal driver in native LPAR on a z15 system. Results may vary based on individual workload, configuration and software levels. This patch (of 9): Create zlib_dfltcc library with the s390 DEFLATE CONVERSION CALL implementation and related compression functions. Update zlib_deflate functions with the hooks for s390 hardware support and adjust workspace structures with extra parameter lists required for hardware deflate. Link: http://lkml.kernel.org/r/20200103223334.20669-2-zaslonko@linux.ibm.com Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Mikhail Zaslonko <zaslonko@linux.ibm.com> Co-developed-by: Ilya Leoshkevich <iii@linux.ibm.com> Cc: Chris Mason <clm@fb.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: David Sterba <dsterba@suse.com> Cc: Eduard Shishkin <edward6@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Josef Bacik <josef@toxicpanda.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-31 09:16:17 +03:00
dfltcc_state->block_size = DFLTCC_BLOCK_SIZE;
dfltcc_state->block_threshold = DFLTCC_FIRST_FHT_BLOCK_SIZE;
dfltcc_state->dht_threshold = DFLTCC_DHT_MIN_SAMPLE_SIZE;
dfltcc_state->param.ribm = DFLTCC_RIBM;
}